3-22-02 Post Mount Master-Luminaires - Spring City … Post Mount.pdfnished as required with a High...
Transcript of 3-22-02 Post Mount Master-Luminaires - Spring City … Post Mount.pdfnished as required with a High...
Washington Style LuminaireCatalog No.: LMWSH
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 1
S p e c i f i c a t i o n
Description
The Washington style luminaire shall consist of a cast orative casing, a ballast socket assembly, and globe. globes and decorative elements as well as optical systavailable vary. Details on these options are detailed onnext page.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 1’-1.25”.
Material
The luminaire casing is of one piece heavy wall cast minum per A.S.T.M. B26-95 Alloy SR356. Other maals are available, gray iron per A.S.T.M. A48, or duiron per A.S.T.M. A536. The luminaire is supplied weither a porcelain medium or mogul base socket. hardware is stainless steel. All components are UL lis
Light Source
Luminaires are UL listed for wet location and are nished as required with a High Intensity Discharge balThe ballasts are high power factor core and coil type are available in a wide range of sources and voltages. the following page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is 3.5” x 3” High. Consult factory for other tenon sizes.
3’-6
.5”
1’-1
.25”
4.5” Dia.
Casing accepts a 3.5” Dia. x 3”High Tenon (Consult factory forother tenon sizes available)
1’-0” Dia.
1’-4.5”
Material Product Style-_____ ILMWSH Cast Iron Luminaire Washington _____ DLMWSH Cast Ductile Iron Luminaire Washington _____ ALMWSH Cast Aluminum Luminaire Washington Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ MV (Mercury Vapor) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)
___ 050/ (50 Watts)___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)
___ 150/ (150 Watts) ___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base ____ SF- Fluorescent ____ SB- Bi PinGlobes___ PS11-118 Clear Stippled polycarbonate ___ PW11- 118 White Stippled polycarbonate
___ PS19-199 Clear Stippled polycarbonate ___ PW19- 199 White Stippled polycarbonate
___ PS07-107 Clear Stippled polycarbonate
___ PF83-118 Refractive type III poly./118 top/lite lid ___ PF93-118 Refractive type III poly./199 top/litelid
___ PF85- 118 Refractive type V poly./118 top/lite lid ___ PF95-118Refractive type V poly./199 top/ litelid
___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe
___ PR18- 18” Dia. Poly. Clear Ball Globe ___ PW18- 18” Dia. Poly. White Ball Globe
___ PR20- 20” Dia. Poly. Clear Ball Globe ___ PW20- 20” Dia. Poly. White Ball Globe
___ AF83-118 Refractive type III acrylic/118 top/lite lid ___ AF93-118 Refractive type III acrylic/199 top/litelid
___ AF85- 118 Refractive type V acrylic/118 top/lite lid ___ AF95-118 Refractive type V acrylic /199 top/ litelid
___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe
___ AR18- 18” Dia. Acrylic Clear Ball Globe ___ AW18- 18” Dia. Acrylic White Ball Globe
___ AR20- 20” Dia. Acrylic Clear Ball Globe ___ AW20- 20” Dia. Acrylic White Ball Globe
Refractor / Reflectors
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ HSF- House side shield Flat ___ HSC- House side shield Curved
___ L6 3- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L 82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials
___ FPP- 110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications
___ BH- Band plain w/ rosettes ___ BE- Band plain less rosettes
___ BS- Band for reflector ___ HS- Heat shield
___ TB- Tarboro struts and rings ___ WT-GL30 Spun top
___ WW- Washington Spun top ___ AS- Armory Square Spun top
___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 2
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Refractors / Reflectors - Finial - CoatingsI LM WSH - MH100 / Q V1 / SD - PF83 - HSF - FPP - CB
OrderingGuide Iron Luminaire Washington- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Refractive 118 - House side sheild - 110 Finial - Classic Black Finish
LMWSH-IN/V1/SD-AW14-FG3-WT-CB
LMWSH-MH070/SV1/SD-AR16-L65-BG
LMWSH-MH050/SV1/SD-PS07-L63-FPP-DB
LMWSH-HP150/QV1/SD-PS19-FSB-BS-DB
LMWSH-HP100/SV4/SD-PS07-L65-FEG-WW-CB
LMWSH-HP250/QV1/SM-AF93-CB
LMWSH-MH070/SV1/SD-PS19-L65-BG
LMWSH-MH050/SV1/SD-AF83-FPP-DB
LMWSH-HP150/QV1/SD-PS11-L82-FPP-TB-DB
LMWSH-HP100/SV4/SD-PS11-VC3-FPA-AS-CB
14”
3’-2
”
2’-8
.25”
16” 16.25” 16.25” 16.5”
18.25”16.5”15.5” 16”16”
2’-1
1.25
”
2’-1
0.5” 3’-8
.25”
3’-6
.25”
3’-6
.5”
3’-2
”
3’-7
”
3’-1
.25”
14N Style LuminaireCatalog No.: LMFTN
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 3
S p e c i f i c a t i o n
Description
The 14N style luminaire shall consist of a cast decoracasing, a ballast socket assembly, and globe. The gloand decorative elements as well as optical systems avable vary. Details on these options are detailed on the npage.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 10”.
Material
The luminaire casing is of one piece heavy wall cast minum per A.S.T.M. B26-95 Alloy SR356. Other maals are available, gray iron per A.S.T.M. A48, or duiron per A.S.T.M. A536. The luminaire is supplied weither a porcelain medium or mogul base socket. hardware is stainless steel. All components are UL lis
Light Source
Luminaires are UL listed for wet location and are nished as required with a High Intensity Discharge balThe ballasts are high power factor core and coil type are available in a wide range of sources and voltages. the following page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is 2.8Dia. x 2.5” High. Consult factory for other tenon size
2’-8
”
10”
3.375” Dia.
Casing accepts a 2.875” Dia.x 2.5” High Tenon (Consult fac-tory for other tenon sizes available)
10” Dia.
1’-2”
Material Product Style-_____ ILMFTN Cast Iron Luminaire 14N _____ DLMFTN Cast Ductile Iron Luminaire 14N _____ ALMFTN Cast Aluminum Luminaire 14N Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ MV (Mercury Vapor) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)
___ 050/ (50 Watts)___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base ____ SF- Fluorescent ____ SB- Bi PinGlobes___ PS11-118 Clear Stippled polycarbonate ___ PW11- 118 White Stippled polycarbonate
___ PS19-199 Clear Stippled polycarbonate ___ PW19- 199 White Stippled polycarbonate
___ PS07-107 Clear Stippled polycarbonate ___ PS92-192 Clear Stippled polycarbonate
___ PF83-118 Refractive type III poly./118 top/lite lid ___ PF93-118 Refractive type III poly./199 top/litelid
___ PF85- 118 Refractive type V poly./118 top/lite lid ___ PF95-118Refractive type V poly./199 top/ litelid
___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe
___ PR18- 18” Dia. Poly. Clear Ball Globe ___ PW18- 18” Dia. Poly. White Ball Globe
___ PR20- 20” Dia. Poly. Clear Ball Globe ___ PW20- 20” Dia. Poly. White Ball Globe
___ AF83-118 Refractive type III acrylic/118 top/lite lid ___ AF93-118 Refractive type III acrylic/199 top/litelid
___ AF85- 118 Refractive type V acrylic/118 top/lite lid ___ AF95-118 Refractive type V acrylic /199 top/ litelid
___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe
___ AR18- 18” Dia. Acrylic Clear Ball Globe ___ AW18- 18” Dia. Acrylic White Ball Globe
___ AR20- 20” Dia. Acrylic Clear Ball Globe ___ AW20- 20” Dia. Acrylic White Ball Globe
Refractor / Reflectors___ HSF- House side shield Flat ___ HSC- House side shield Curved
___ L6 3- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L 82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials
___ FPP- 110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications
___ BH- Band plain w/ rosettes ___ BE- Band plain less rosettes
___ BS- Band for reflector ___ HS- Heat shield
___ TB- Tarboro struts and rings ___ WT-GL30 Spun top
___ WW- Washington Spun top ___ AS- Armory Square Spun top
___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 4
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Refractors / Reflectors - CoatingsI LM FTN - MH100 / Q V1 / SD - PS92 - HSF - CB
OrderingGuide Iron Luminaire 14N- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -192 Stippled Polycarbonate - House side sheild - Classic Black Finish
LMFTN-IN/V1/SD-PW16-FG3-WT-CB
LMFTN-MH070/SV1/SD-PR20-L65-BG
LMFTN-MH050/SV1/SD-PS07-L63-FPP-DB
LMFTN-HP150/QV1/SD-PS11-HN3-FPP-DB
LMFTN-HP100/SV4/SD-PS07-L65-FEG-WW-CB
2’-1
1.75
”16”
LMFTN-HP250/QV1/SM-PS19-FSB-BH-CB
LMFTN-MH070/SV1/SD-PF93-BG
LMFTN-MH050/SV1/SD-PW19-DB
LMFTN-HP150/QV1/SD-PS11-VC5-FPA-AS-DB
LMFTN-HP100/SV4/SD-PF83-FPP-CB
2’-5
.25”
3’-3
.75”
2’-1
0.25
”
3’-0
”
20” 16.25” 16.25” 16.5”2’
-11”
2’-8
.25”
2’-7
.75”
3’-5
.25”
3’-3
.25”
15.5” 16” 16.5”14”16.5”
New Frontier Style LuminaireCatalog No.: LMNWF
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 5
S p e c i f i c a t i o n
Description
The New Frontier style luminaire shall consist of a decorative casing, a ballast socket assembly, and glThe globes and decorative elements as well as optical tems available vary. Details on these options are detaon the next page.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 1’-0.25”.
Material
The luminaire casing is of one piece heavy wall cast minum per A.S.T.M. B26-95 Alloy SR356. Other maals are available, gray iron per A.S.T.M. A48, or duiron per A.S.T.M. A536. The luminaire is supplied weither a porcelain medium or mogul base socket. hardware is stainless steel. All components are UL lis
Light Source
Luminaires are UL listed for wet location and are nished as required with a High Intensity Discharge balThe ballasts are high power factor core and coil type are available in a wide range of sources and voltages. the following page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is 4” x 3” High. Consult factory for other tenon sizes.
3’-1
”
1’-0
.25”
5.25” Dia.
Casing accepts a 4” Dia. x 3”High Tenon (Consult factory forother tenon sizes available)
11” Dia.
1’-6.5”
Material Product Style-_____ ILMNWF Cast Iron Luminaire New Frontier _____ DLMNWF Cast Ductile Iron Luminaire New Frontier _____ ALMNWF Cast Aluminum Luminaire New Frontier Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ MV (Mercury Vapor) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)
___ 050/ (50 Watts)___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)
___ 150/ (150 Watts) ___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base ____ SF- Fluorescent ____ SB- Bi PinGlobes___ PS11-118 Clear Stippled polycarbonate ___ PW11- 118 White Stippled polycarbonate
___ PS19-199 Clear Stippled polycarbonate ___ PW19- 199 White Stippled polycarbonate
___ PS07-107 Clear Stippled polycarbonate
___ PF83-118 Refractive type III poly./118 top/lite lid ___ PF93-118 Refractive type III poly./199 top/litelid
___ PF85- 118 Refractive type V poly./118 top/lite lid ___ PF95-118Refractive type V poly./199 top/ litelid
___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe
___ PR18- 18” Dia. Poly. Clear Ball Globe ___ PW18- 18” Dia. Poly. White Ball Globe
___ PR20- 20” Dia. Poly. Clear Ball Globe ___ PW20- 20” Dia. Poly. White Ball Globe
___ AF83-118 Refractive type III acrylic/118 top/lite lid ___ AF93-118 Refractive type III acrylic/199 top/litelid
___ AF85- 118 Refractive type V acrylic/118 top/lite lid ___ AF95-118 Refractive type V acrylic /199 top/ litelid
___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe
___ AR18- 18” Dia. Acrylic Clear Ball Globe ___ AW18- 18” Dia. Acrylic White Ball Globe
___ AR20- 20” Dia. Acrylic Clear Ball Globe ___ AW20- 20” Dia. Acrylic White Ball Globe
Refractor / Reflectors
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ HSF- House side shield Flat ___ HSC- House side shield Curved
___ L6 3- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L 82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ STR- Stacked Reflector
Finials
___ FPP- 110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications
___ BH- Band plain w/ rosettes ___ BE- Band plain less rosettes
___ BS- Band for reflector ___ HS- Heat shield
___ TB- Tarboro struts and rings ___ WT-GL30 Spun top
___ WW- Washington Spun top ___ AS- Armory Square Spun top
___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 6
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Finial - Modifications - CoatingsI LM NWF - MH100 / Q V1 / SD - PS19 - FPP - TB - CB
OrderingGuide Iron Luminaire New Frontier- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -118 Ref. Type V Poly. -110 Finial-Tarboro Strut & Ring-Classic Black Finish
LMNWF-IN/V1/SD-PW16-FG3-WT-CB
LMNWF-MH070/SV1/SD-AR18-L65-BG
LMNWF-MH050/SV1/SD-PS07-L63-FPP-DB
LMNWF-HP150/QV1/SD-PS19-L82-FSB-BH-DB
LMNWF-HP100/SV4/SD-PS07-L65-FEG-WW-CB
16”
LMNWF-HP250/QV1/SM-AF93-CB
LMNWF-MH070/SV1/SD-PF95-FG3-BG
LMNWF-MH050/SV1/SD-PF83-FPP-DB
LMNWF-HP150/QV1/SD-PF85-L82-FPP-TB-DB
LMNWF-HP100/SV4/SD-PS11-VC5-FPA-AS-CB
3’-1
.75”
18” 16.25” 16.25” 16.5”
16”16” 16.5” 16.5” 18.5”
2’-5
.25”
3’-0
.25”
3’-5
.5”
3’-6
”
3’-1
”
3’-5
.5”
3’-1
”
3’-2
”
2’-1
0.25
”
Bryn Mawr Style LuminaireCatalog No.: LMBNM
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 7
S p e c i f i c a t i o n
Description
The Bryn Mawr style luminaire shall consist of a cast orative casing, a ballast socket assembly, and globe. globes and decorative elements as well as optical systavailable vary. Details on these options are detailed onnext page.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 7.75”.
Material
The luminaire casing is of one piece heavy wall cast minum per A.S.T.M. B26-95 Alloy SR356. Other maals are available, gray iron per A.S.T.M. A48, or duiron per A.S.T.M. A536. The luminaire is supplied weither a porcelain medium or mogul base socket. hardware is stainless steel. All components are UL lis
Light Source
Luminaires are UL listed for wet location and are nished as required with a High Intensity Discharge balThe ballasts are high power factor core and coil type are available in a wide range of sources and voltages. the following page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is 2.8Dia. x 3” High. Consult factory for other tenon sizes
2’-5
.75”
7.75
”
4.5” Dia.
Casing accepts a 2.875” Dia. x 3”High Tenon (Consult factory for othertenon sizes available)
11.25” Dia.
1’-3.875”
Material Product Style-_____ ILMBNM Cast Iron Luminaire Bryn Mawr _____ DLMBNM Cast Ductile Iron Luminaire Bryn Mawr _____ ALMBNM Cast Aluminum Luminaire Bryn Mawr Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ MV (Mercury Vapor) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)
___ 050/ (50 Watts)___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)
___ 150/ (150 Watts) ___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base ____ SF- Fluorescent ____ SB- Bi PinGlobes___ PS11-118 Clear Stippled polycarbonate ___ PW11- 118 White Stippled polycarbonate
___ PS19-199 Clear Stippled polycarbonate ___ PW19- 199 White Stippled polycarbonate
___ PS07-107 Clear Stippled polycarbonate ___ PS92-192 Clear Stippled polycarbonate
___ PF83-118 Refractive type III poly./118 top/lite lid ___ PF93-118 Refractive type III poly./199 top/litelid
___ PF85- 118 Refractive type V poly./118 top/lite lid ___ PF95-118Refractive type V poly./199 top/ litelid
___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe
___ PR18- 18” Dia. Poly. Clear Ball Globe ___ PW18- 18” Dia. Poly. White Ball Globe
___ PR20- 20” Dia. Poly. Clear Ball Globe ___ PW20- 20” Dia. Poly. White Ball Globe
___ AF83-118 Refractive type III acrylic/118 top/lite lid ___ AF93-118 Refractive type III acrylic/199 top/litelid
___ AF85- 118 Refractive type V acrylic/118 top/lite lid ___ AF95-118 Refractive type V acrylic /199 top/ litelid
___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe
___ AR18- 18” Dia. Acrylic Clear Ball Globe ___ AW18- 18” Dia. Acrylic White Ball Globe
___ AR20- 20” Dia. Acrylic Clear Ball Globe ___ AW20- 20” Dia. Acrylic White Ball Globe
Refractor / Reflectors
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ HSF- House side shield Flat ___ HSC- House side shield Curved
___ L6 3- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L 82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials
___ FPP- 110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications
___ BH- Band plain w/ rosettes ___ BE- Band plain less rosettes
___ BS- Band for reflector ___ HS- Heat shield
___ TB- Tarboro struts and rings ___ WT-GL30 Spun top
___ WW- Washington Spun top ___ AS- Armory Square Spun top
___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 8
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - CoatingsI LM BNM - MH100 / Q V1 / SD - AF93 - CB
OrderingGuide Iron Luminaire Bryn Mawr- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Refractive 118 Type III Acrylic/199 Top/Lite Lid - Classic Black Finish
LMBNM-IN/V1/SD-PW16-FG3-WT-CB
LMBNM-MH070/SV1/SD-AR20-L65-BG
LMBNM-MH050/SV1/SD-PS07-L63-FPP-DB
LMBNM-HP150/QV1/SD-PS19-L65-FSB-BH-DB
LMBNM-HP100/SV4/SD-PS07-L85-FEG-WW-CB
2’-9
.25”
16”
LMBNM-HP250/QV1/SM-PF93-CB
LMBNM-MH070/SV1/SD-PS19-L65-BG
LMBNM-MH050/SV1/SD-AF83-FPP-DB
LMBNM-HP150/QV1/SD-PS11-L82-FPP-TB-DB
LMBNM-HP100/SV4/SD-PS11-VC3-FPA-AS-CB
20” 16.25” 16.25” 16.5”
16”.5 18.5”16”15.5”16”
2’-7
.75”
2’-2
.75” 3’
-1.2
5”
2’-8
.5”
3’-1
”
3’-1
”
3’-2
.75”
2’-5
.25”
2’-5
.75”
Orleans Style LuminaireCatalog No.: LMORL
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 9
S p e c i f i c a t i o n
Description
The Orleans style luminaire shall consist of a cast dective casing, a ballast socket assembly, and globe. globes and decorative elements as well as optical systavailable vary. Details on these options are detailed onnext page.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 9.5”.
Material
The luminaire casing is of heavy wall cast aluminumA.S.T.M. B26-95 Alloy SR356. The luminaire is suppwith either a porcelain medium or mogul base socket.hardware is stainless steel. All components are UL lis
Light Source
Luminaires are UL listed for wet location and are nished as required with a High Intensity Discharge balThe ballasts are high power factor core and coil type are available in a wide range of sources and voltages. the following page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is 2.8Dia. x 2” High. Consult factory for other tenon sizes
2’-0
.25”
9.5”
3.5” Dia.
Casing accepts a 2.875” Dia. x 2”High Tenon (Consult factory for othertenon sizes available)
8.75” Dia.
1’-4”
Material Product Style-_____ ALMORL Cast Aluminum Luminaire Orleans Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ MV (Mercury Vapor) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)
___ 050/ (50 Watts)___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)
___ 150/ (150 Watts) ___ 175/ (175 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base ____ SF- Fluorescent ____ SB- Bi PinGlobes___ PS11-118 Clear Stippled polycarbonate ___ PW11- 118 White Stippled polycarbonate
___ PS19-199 Clear Stippled polycarbonate ___ PW19- 199 White Stippled polycarbonate
___ PS07-107 Clear Stippled polycarbonate ___ PS92-192 Clear Stippled polycarbonate
___ PF83-118 Refractive type III poly./118 top/lite lid ___ PF93-118 Refractive type III poly./199 top/litelid
___ PF85- 118 Refractive type V poly./118 top/lite lid ___ PF95-118Refractive type V poly./199 top/ litelid
___ PR14- 14” Dia. Poly. Clear Ball Globe ___ PW14- 14” Dia. Poly. White Ball Globe
___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe
___ PR18- 18” Dia. Poly. Clear Ball Globe ___ PW18- 18” Dia. Poly. White Ball Globe
___ AF83-118 Refractive type III acrylic/118 top/lite lid ___ AF93-118 Refractive type III acrylic/199 top/litelid
___ AF85- 118 Refractive type V acrylic/118 top/lite lid ___ AF95-118 Refractive type V acrylic /199 top/ litelid
___ AR14- 14” Dia. Acrylic Clear Ball Globe ___ AW14- 14” Dia. Acrylic White Ball Globe
___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe
___ AR18- 18” Dia. Acrylic Clear Ball Globe ___ AW18- 18” Dia. Acrylic White Ball Globe
Refractor / Reflectors
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ HSF- House side shield Flat ___ HSC- House side shield Curved
___ L6 3- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L 82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials
___ FPP- 110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FBB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications
___ BH- Band plain w/ rosettes ___ BE- Band plain less rosettes
___ BS- Band for reflector ___ HS- Heat shield
___ TB- Tarboro struts and rings ___ WT-GL30 Spun top
___ WW- Washington Spun top ___ AS- Armory Square Spun top
___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 10
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - CoatingsA LM ORL - MH100 / Q V1 / SD - PW16 - CB
OrderingGuide Aluminum Luminaire Orleans- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -16” Dia. Polycarbonate White Ball Globe - Classic Black Finish
LMORL-IN/V1/SD-PW16-FG3-WT-CB
LMORL-MH070/SV1/SD-AR18-L65-BG
LMORL-MH050/SV1/SD-PW14-DB
LMORL-HP150/QV1/SD-PS07-L63-FEG-WW-DB
LMORL-HP100/SV4/SD-PS07-L65-FPP-CB
1’-1
0.25
”
14”
LMORL-HP250/QV1/SM-PS19-FSB-BH-CB
LMORL-MH070/SV1/SD-PF93-BG
LMORL-MH050/SV1/SD-AF93-FG3-DB
LMORL-HP150/QV1/SD-PS11-VC5-FPA-AS-DB
LMORL-HP100/SV4/SD-PF83-FPP-CB
16”
2’-1
1”
2’-2
.75”
18”
2’-9
.75”
16.25”
3’-3
.25”
16.25”
3’-2
.75”
16.5”16.5”
3’-2
.75”
3’-0
”
16”
2’-8
.25”
16”
2’-1
0.5”
16.5”
Shasta Style LuminaireCatalog No.: LMSHA
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 1
S p e c i f i c a t i o n
Description
The Shasta style luminaire shall consist of a cast dective casing, a ballast socket assembly, and globe. globes and decorative elements as well as optical systavailable vary. Details on these options are detailed onnext page.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 1’-1.25”.
Material
The luminaire casing is of one piece heavy wall cast minum per A.S.T.M. B26-95 Alloy SR356. The luminis supplied with either a 4KV porcelain medium or mobase socket. All hardware is stainless steel. All comnents are UL listed.
Light Source
Luminaires are UL listed for wet location and are nished as required with a High Intensity Discharge balThe ballasts are high power factor core and coil type are available in a wide range of sources and voltages. the following page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is 2.8Dia. x 3” High. Consult factory for other tenon sizes
3’-2
”
1’-1
.25”
4” Dia.
Casing accepts a 2.875” Dia. x3” High Tenon (Consult factory forother tenon sizes available)
10” Dia.
1’-5.5”
Material Product Style-_____ ILMSHA Cast Iron Luminaire Shasta _____ DLMSHA Cast Ductile Iron Luminaire Shasta _____ ALMSHA Cast Aluminum Luminaire Shasta Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ MV (Mercury Vapor) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)
___ 050/ (50 Watts)___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)
___ 150/ (150 Watts) ___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base ____ SF- Fluorescent ____ SB- Bi PinGlobes___ PS11-118 Clear Stippled polycarbonate ___ PW11- 118 White Stippled polycarbonate
___ PS19-199 Clear Stippled polycarbonate ___ PW19- 199 White Stippled polycarbonate
___ PS07-107 Clear Stippled polycarbonate
___ PF83-118 Refractive type III poly./118 top/lite lid ___ PF93-118 Refractive type III poly./199 top/litelid
___ PF85- 118 Refractive type V poly./118 top/lite lid ___ PF95-118Refractive type V poly./199 top/ litelid
___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe
___ PR18- 18” Dia. Poly. Clear Ball Globe ___ PW18- 18” Dia. Poly. White Ball Globe
___ PR20- 20” Dia. Poly. Clear Ball Globe ___ PW20- 20” Dia. Poly. White Ball Globe
___ AF83-118 Refractive type III acrylic/118 top/lite lid ___ AF93-118 Refractive type III acrylic/199 top/litelid
___ AF85- 118 Refractive type V acrylic/118 top/lite lid ___ AF95-118 Refractive type V acrylic /199 top/ litelid
___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe
___ AR18- 18” Dia. Acrylic Clear Ball Globe ___ AW18- 18” Dia. Acrylic White Ball Globe
___ AR20- 20” Dia. Acrylic Clear Ball Globe ___ AW20- 20” Dia. Acrylic White Ball Globe
Refractor / Reflectors
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ HSF- House side shield Flat ___ HSC- House side shield Curved
___ L6 3- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L 82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials
___ FPP-110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG Eagle Finial ___ FG3- GL30 Finial
Modifications
___ BH- Band plain w/ rosettes ___ BE- Band plain less rosettes
___ BS- Band for reflector ___ HS- Heat shield
___ TB- Tarboro struts and rings ___ WT-GL30 Spun top
___ WW- Washington Spun top ___ AS- Armory Square Spun top
___ BT- Button type photo control ___ SU- 540 Strut
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 12
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Finial - Modifications - CoatingsI LM SHA - MH100 / Q V1 / SD - PS19 - FSB - BS/SU - CB
OrderingGuide Iron Luminaire Shasta- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -199 Clear Stip. Poly. -Small Brass Finial -Band for Reflector-Classic Black Finish
LMSHA-IN/V1/SD-PW16-FG3-WT-CB
LMSHA-MH070/SV1/SD-AR18-L65-BG
LMSHA-MH050/SV1/SD-PS07-L63-FPP-DB
LMSHA-HP150/QV1/SD-PS19-FSB-BS-DB
LMSHA-HP100/SV4/SD-PS07-L65-FEG-WW-CB
3’-2
.75”
16”
LMSHA-HP250/QV1/SM-AF93-CB
LMSHA-MH070/SV1/SD-PS19-L65-BG
LMSHA-MH050/SV1/SD-PF83-FPP-DB
LMSHA-HP150/QV1/SD-PS11-L82-BS-SU-FSB-DB
LMSHA-HP100/SV4/SD-PS11-VC3-FPA-AS-CB
2’-6
.5”
3’-1
.25”
3’-2
”
3’-7
”
3’-5
.75”
3’-6
.5”
3’-8
.5”
2’-1
0.75
”
2’-1
1.25
”
18” 16.25” 16.25” 16.5”
16.5”16.5”16”15.5”16”
Brentwood Style LuminaireCatalog No.: LMBRT
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 1
S p e c i f i c a t i o n
Description
The Brentwood style luminaire shall consist of a cast orative casing, a ballast socket assembly, and globe. globes and decorative elements as well as optical systavailable vary. Details on these options are detailed onnext page.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 9.625”.
Material
The luminaire casing is of heavy wall cast aluminumA.S.T.M. B26-95 Alloy SR356. The luminaire is suppwith either a porcelain medium or mogul base socket.hardware is stainless steel. All components are UL lis
Light Source
Luminaires are UL listed for wet location and are nished as required with a High Intensity Discharge balThe ballasts are high power factor core and coil type are available in a wide range of sources and voltages. the following page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is 2.8Dia. x 3” High. Consult factory for other tenon sizes
3’-2
”
9.62
5”
4.75” Dia.
Casing accepts a 2.875” Dia. x3” High Tenon (Consult factory forother tenon sizes available)
8.75” Dia.
1’-4.5”
Material Product Style-_____ ALMBRT Cast Aluminum Luminaire Brentwood Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ MV (Mercury Vapor) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)
___ 050/ (50 Watts)___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)
___ 150/ (150 Watts) ___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base ____ SF- Fluorescent ____ SB- Bi PinGlobes___ PS11-118 Clear Stippled polycarbonate ___ PW11- 118 White Stippled polycarbonate
___ PS19-199 Clear Stippled polycarbonate ___ PW19- 199 White Stippled polycarbonate
___ PS07-107 Clear Stippled polycarbonate
___ PF83-118 Refractive type III poly./118 top/lite lid ___ PF93-118 Refractive type III poly./199 top/litelid
___ PF85- 118 Refractive type V poly./118 top/lite lid ___ PF95-118Refractive type V poly./199 top/ litelid
___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe
___ PR18- 18” Dia. Poly. Clear Ball Globe ___ PW18- 18” Dia. Poly. White Ball Globe
___ PR20- 20” Dia. Poly. Clear Ball Globe ___ PW20- 20” Dia. Poly. White Ball Globe
___ AF83-118 Refractive type III acrylic/118 top/lite lid ___ AF93-118 Refractive type III acrylic/199 top/litelid
___ AF85- 118 Refractive type V acrylic/118 top/lite lid ___ AF95-118 Refractive type V acrylic /199 top/ litelid
___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe
___ AR18- 18” Dia. Acrylic Clear Ball Globe ___ AW18- 18” Dia. Acrylic White Ball Globe
___ AR20- 20” Dia. Acrylic Clear Ball Globe ___ AW20- 20” Dia. Acrylic White Ball Globe
Refractor / Reflectors
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ HSF- House side shield Flat ___ HSC- House side shield Curved
___ L6 3- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L 82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials
___ FPP- 110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications
___ BH- Band plain w/ rosettes ___ BE- Band plain less rosettes
___ BS- Band for reflector ___ HS- Heat shield
___ TB- Tarboro struts and rings ___ WT-GL30 Spun top
___ WW- Washington Spun top ___ AS- Armory Square Spun top
___ BT- Button type photo control ___ SU- 540 Strut
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 14
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Refractors / Reflectors - Finial - CoatingsA LM BRT - MH100 / Q V1 / SD - PF83 - HSF - FSB - CB
OrderingGuide AluminumLuminaire Brentwood- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Refractive 118 -House side sheild Small Brass Finial -Classic Black Finish
LMBRT-IN/V1/SD-PW16-FG3-WT-CB
LMBRT-MH070/SV1/SD-AR18-L65-BG
LMBRT-MH050/SV1/SD-PS07-L63-FPP-DB
LMBRT-HP150/QV1/SD-PS19-L63-FSB-BS-DB
LMBRT-HP100/SV4/SD-PS07-L65-FEG-WW-CB
2’-1
1.25
”
16”
LMBRT-HP250/QV1/SM-AF93-CB
LMBRT-MH070/SV1/SD-PF95-FG3-BG
LMBRT-MH050/SV1/SD-AF83-FPP-DB
LMBRT-HP150/QV1/SD-PS19-FSB-BS/SU-DB
LMBRT-HP100/SV4/SD-PS11-VC3-FPA-AS-CB
2’-2
.75”
18” 16.25” 16.25” 16.5”
17.5”16.5”16” 16.5”16”
2’-9
.75”
3’-3
.25”
2’-1
0.5”
2’-1
0.5”
3’-3
”
3’-3
”
2’-1
1.25
”
2’-7
.75”
Worthington Style LuminaireCatalog No.: LMWRT
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 1
S p e c i f i c a t i o n
Description
The Worthington style luminaire shall consist of a decorative casing, a ballast socket assembly, and glThe globes and decorative elements as well as optical tems available vary. Details on these options are detaon the next page.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 1’-1.75”.
Material
The luminaire casing is of one piece heavy wall cast minum per A.S.T.M. B26-95 Alloy SR356. Other maals are available, gray iron per A.S.T.M. A48, or duiron per A.S.T.M. A536. The luminaire is supplied weither a porcelain medium or mogul base socket. hardware is stainless steel. All components are UL lis
Light Source
Luminaires are UL listed for wet location and are nished as required with a High Intensity Discharge balThe ballasts are high power factor core and coil type are available in a wide range of sources and voltages. the following page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is 3.5” x 4” High. Consult factory for other tenon sizes.
3’-7
”
1’-1
.75”
4.875” Dia.
Casing accepts a 3.5” Dia. x 4”High Tenon (Consult factory forother tenon sizes available)
11” Dia.
1’-4.5”
Material Product Style-_____ ILMWRT Cast Iron Luminaire Worthington _____ DLMWRT Cast Ductile Iron Luminaire Worthington _____ ALMWRT Cast Aluminum Luminaire Worthington Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ MV (Mercury Vapor) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)
___ 050/ (50 Watts)___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)
___ 150/ (150 Watts) ___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base ____ SF- Fluorescent ____ SB- Bi PinGlobes___ PS11-118 Clear Stippled polycarbonate ___ PW11- 118 White Stippled polycarbonate
___ PS19-199 Clear Stippled polycarbonate ___ PW19- 199 White Stippled polycarbonate
___ PS07-107 Clear Stippled polycarbonate
___ PF83-118 Refractive type III poly./118 top/lite lid ___ PF93-118 Refractive type III poly./199 top/litelid
___ PF85- 118 Refractive type V poly./118 top/lite lid ___ PF95-118Refractive type V poly./199 top/ litelid
___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe
___ PR18- 18” Dia. Poly. Clear Ball Globe ___ PW18- 18” Dia. Poly. White Ball Globe
___ PR20- 20” Dia. Poly. Clear Ball Globe ___ PW20- 20” Dia. Poly. White Ball Globe
___ AF83-118 Refractive type III acrylic/118 top/lite lid ___ AF93-118 Refractive type III acrylic/199 top/litelid
___ AF85- 118 Refractive type V acrylic/118 top/lite lid ___ AF95-118 Refractive type V acrylic /199 top/ litelid
___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe
___ AR18- 18” Dia. Acrylic Clear Ball Globe ___ AW18- 18” Dia. Acrylic White Ball Globe
___ AR20- 20” Dia. Acrylic Clear Ball Globe ___ AW20- 20” Dia. Acrylic White Ball Globe
Refractor / Reflectors
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ HSF- House side shield Flat ___ HSC- House side shield Curved
___ L6 3- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L 82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials
___ FPP- 110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications
___ BH- Band plain w/ rosettes ___ BE- Band plain less rosettes
___ BS- Band for reflector ___ HS- Heat shield
___ TB- Tarboro struts and rings ___ WT-GL30 Spun top
___ WW- Washington Spun top ___ AS- Armory Square Spun top
___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 16
LMWRT-IN/V1/SD-AW16-FG3-WT-CB
LMWRT-MH070/SV1/SD-AR18-L65-BG
LMWRT-MH050/SV1/SD-PS07-STR-FPP-DB
LMWRT-HP150/QV1/SD-PS19-FSB-BS-DB
LMWRT-HP100/SV4/SD-PS07-L65-FEG-WW-CB
3’-3
.25”
16”
LMWRT-HP250/QV1/SM-PF93-CB
LMWRT-MH070/SV1/SD-PS19-L65-BG
LMWRT-MH050/SV1/SD-AF83-FPP-DB
LMWRT-HP150/QV1/SD-PF85-FPP-TB-DB
LMWRT-HP100/SV4/SD-PS11-VC3-FPA-AS-CB
2’-6
.75”
18” 16.25” 16.25” 16.5”
18.5”16.5”15.5” 16”16”
3’-1
.75”
3’-7
.25”
3’-2
.5”
3’-7
”
3’-7
”
3’-8
.75”
2’-1
1”
2’-1
1.75
”
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Refractors / Reflectors - Finial -Modifications - CoatingsI LM WRT - MH100 / Q V1 / SD - PS11 - VC3 - FPA -AS - CB
OrderingGuide Iron Luminaire Worthington- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Clear Stip. Poly. -Horizontal Cut Off/III -Armory Square -Classic Black Finish
Gettysburg Style LuminaireCatalog No.: LMGTT
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 1
S p e c i f i c a t i o n
Description
The Gettysburg style luminaire shall consist of a cast orative casing, a ballast socket assembly, and globe. globes and decorative elements as well as optical systavailable vary. Details on these options are detailed onnext page.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 10.875”.
Material
The luminaire casing is of heavy wall cast aluminumA.S.T.M. B26-95 Alloy SR356. The luminaire is suppwith either a 4KV porcelain medium or mogul base soet. All hardware is stainless steel. All components arelisted.
Light Source
Luminaires are UL listed for wet location and are nished as required with a High Intensity Discharge balThe ballasts are high power factor core and coil type are available in a wide range of sources and voltages. the following page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is 2.8Dia. x 3” High. Consult factory for other tenon sizes
3’-0
.5”
10.8
75”
3.375” Dia.
Casing accepts a 2.875” Dia. x3” High Tenon (Consult factory forother tenon sizes available)
9” Dia.
1’-4”
Material Product Style-_____ ALM GTT - Cast Aluminum Luminaire Gettysburg Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ MV (Mercury Vapor) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)
___ 050/ (50 Watts)___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)
___ 150/ (150 Watts) ___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base ____ SF- Fluorescent ____ SB- Bi PinGlobes___ PS11-118 Clear Stippled polycarbonate ___ PW11- 118 White Stippled polycarbonate
___ PS19-199 Clear Stippled polycarbonate ___ PW19- 199 White Stippled polycarbonate
___ PS07-107 Clear Stippled polycarbonate
___ PF83-118 Refractive type III poly./118 top/lite lid ___ PF93-118 Refractive type III poly./199 top/litelid
___ PF85- 118 Refractive type V poly./118 top/lite lid ___ PF95-118Refractive type V poly./199 top/ litelid
___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe
___ PR18- 18” Dia. Poly. Clear Ball Globe ___ PW18- 18” Dia. Poly. White Ball Globe
___ PR20- 20” Dia. Poly. Clear Ball Globe ___ PW20- 20” Dia. Poly. White Ball Globe
___ AF83-118 Refractive type III acrylic/118 top/lite lid ___ AF93-118 Refractive type III acrylic/199 top/litelid
___ AF85- 118 Refractive type V acrylic/118 top/lite lid ___ AF95-118 Refractive type V acrylic /199 top/ litelid
___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe
___ AR18- 18” Dia. Acrylic Clear Ball Globe ___ AW18- 18” Dia. Acrylic White Ball Globe
___ AR20- 20” Dia. Acrylic Clear Ball Globe ___ AW20- 20” Dia. Acrylic White Ball Globe
Refractor / Reflectors
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ HSF- House side shield Flat ___ HSC- House side shield Curved
___ L6 3- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L 82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials
___ FPP- 110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications
___ BH- Band plain w/ rosettes ___ BE- Band plain less rosettes
___ BS- Band for reflector ___ HS- House side shield
___ TB- Tarboro struts and rings ___ WT-GL30 Spun top
___ WW- Washington Spun top ___ AS- Armory Square Spun top
___ BT- Button type photo control ___ SU- 540 Struts
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 18
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Refractors / Reflectors - Finial - CoatingsA LM GTT - MH100 / Q V1 / SD - PF83 - HSF - FG3 - CB
OrderingGuide Aluminum Luminaire Gettysburg- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Refractive 118 - House side sheild - 110 Finial - Classic Black Finish
LMGTT-IN/V1/SD-PW16-FG3-WT-CB
LMGTT-MH070/SV1/SD-AR18-L65-BG
LMGTT-MH050/SV1/SD-PS07-L63-FPP-DB
LMGTT-HP150/QV1/SD-PS19-FSB-BS-DB
LMGTT-HP100/SV4/SD-PS07-L65-FEG-WW-CB
3’-0
.5”
16”
LMGTT-HP250/QV1/SM-AF93-CB
LMGTT-MH070/SV1/SD-PS19-L65-BG
LMGTT-MH050/SV1/SD-AF83-FPP-DB
LMGTT-HP150/QV1/SD-PS19-L63-FSB-SU-DB
LMGTT-HP100/SV4/SD-PS11-VC5-FPA-AS-CB
18”
2’-4
”
16.25”
2’-1
1”
16.25”
3’-4
.5”
2’-1
1.75
”
16.5”
17.5”
3’-0
”
16.5”
3’-4
”
3’-6
”
16”
2’-8
.5”
15.5”16”
2’-9
”
Central City Style LuminaireCatalog No.: LMCCD
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 1
S p e c i f i c a t i o n
Description
The Central City style luminaire shall consist of a decorative casing, a ballast socket assembly, and glThe globes and decorative elements as well as optical tems available vary. Details on these options are detaon the next page.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 11”.
Material
The luminaire casing is of one piece heavy wall cast minum per A.S.T.M. B26-95 Alloy SR356. Other maals are available, gray iron per A.S.T.M. A48, or duiron per A.S.T.M. A536. The luminaire is supplied weither a porcelain medium or mogul base socket. hardware is stainless steel. All components are UL lis
Light Source
Luminaires are UL listed for wet location and are nished as required with a High Intensity Discharge balThe ballasts are high power factor core and coil type are available in a wide range of sources and voltages. the following page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is 4” x 3” High. Consult factory for other tenon sizes.
3’-6
”
1’-1
.25”
6” Dia.
Casing accepts a 4” Dia. x 3”High Tenon (Consult factory forother tenon sizes available)
9.75” Dia.
1’-4”
Material Product Style-_____ ILMCCD Cast Iron Luminaire Central City _____ DLMCCD Cast Ductile Iron Luminaire Central City _____ ALMCCD Cast Aluminum Luminaire Central City Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ MV (Mercury Vapor) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)
___ 050/ (50 Watts) ___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)
___ 150/ (150 Watts) ___ 175/ (175 Watts) ___ 200/ (200 Watts)___ 250/ (250 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base ____ SF- Fluorescent ____ SB- Bi PinGlobes___ PS11-118 Clear Stippled polycarbonate ___ PW11- 118 White Stippled polycarbonate
___ PS19-199 Clear Stippled polycarbonate ___ PW19- 199 White Stippled polycarbonate
___ PS07-107 Clear Stippled polycarbonate
___ PF83-118 Refractive type III poly./118 top/lite lid ___ PF93-118 Refractive type III poly./199 top/litelid
___ PF85- 118 Refractive type V poly./118 top/lite lid ___ PF95-118Refractive type V poly./199 top/ litelid
___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe
___ PR18- 18” Dia. Poly. Clear Ball Globe ___ PW18- 18” Dia. Poly. White Ball Globe
___ AF83-118 Refractive type III acrylic/118 top/lite lid ___ AF93-118 Refractive type III acrylic/199 top/litelid
___ AF85- 118 Refractive type V acrylic/118 top/lite lid ___ AF95-118 Refractive type V acrylic /199 top/ litelid
___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe
___ AR18- 18” Dia. Acrylic Clear Ball Globe ___ AW18- 18” Dia. Acrylic White Ball Globe
Refractor / Reflectors
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ HSF- House side shield Flat ___ HSC- House side shield Curved
___ L6 3- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials
___ FPP- 110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications
___ BH- Band plain w/ rosettes ___ BE- Band plain less rosettes
___ BS- Band for reflector ___ HS- House side shield
___ TB- Tarboro struts and rings ___ WT-GL30 Spun top
___ WW- Washington Spun top ___ AS- Armory Square Spun top
___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 20
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Refractors / Reflectors - Finial - CoatingsI LM CCD - MH100 / Q V1 / SD - F83 - HSF - FPA - CB
OrderingGuide Iron Luminaire Central City- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Refractive 118 - House side sheild - 110 Finial - Classic Black Finish
LMCCD-IN/V1/SD-AW16-FG3-WT-CB
LMCCD-MH070/SV1/SD-AR20-L65-BG
LMCCD-MH050/SV1/SD-PS07-L63-FPP-DB
LMCCD-HP150/QV1/SD-PS19-HN3-FSB-BS-DB
LMCCD-HP100/SV4/SD-PS07-L65-FEG-WW-CB
3’-0
.25”
16”
LMCCD-HP250/QV1/SM-AF93-FPP-CB
LMCCD-MH070/SV1/SD-PS19-L65-BG
LMCCD-MH050/SV1/SD-AF83-FP-DB
LMCCD-HP150/QV1/SD-PS11-L82-FPA-TB-DB
LMCCD-HP100/SV4/SD-PS11-L85-FPP-AS-CB
20” 16.25” 16.25”
2’-6
.25”
2’-1
1”
3’-4
.75”
3’-0
”
16.5”
14” 16”
3’-0
.25”
2’-9
”
2’-8
.5” 3’-6
.25”
15.5” 16” 16.5”
3’-4
.25”
Note: Incandescent only Note: Incandescent only
Armory Square Style LuminaireCatalog No.: LMARM
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 2
S p e c i f i c a t i o n
Description
The Armory Square style luminaire shall consist of a decorative casing, a ballast socket assembly, and glThe globes and decorative elements as well as optical tems available vary. Details on these options are detaon the next page.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 1’-0.75”.
Material
The luminaire casing is of one piece heavy wall cast minum per A.S.T.M. B26-95 Alloy SR356. Other maals are available, gray iron per A.S.T.M. A48, or duiron per A.S.T.M. A536. The luminaire is supplied weither a porcelain medium or mogul base socket. hardware is stainless steel. All components are UL lis
Light Source
Luminaires are UL listed for wet location and are nished as required with a High Intensity Discharge balThe ballasts are high power factor core and coil type are available in a wide range of sources and voltages. the following page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is 7” x 3/4” High. Consult factory for other tenon sizes.
3’-5
.75”
1’-0
.75”
7.75” Dia.
Casing accepts a 7” Dia. x 3/4”High Tenon (Consult factory for othertenon sizes available)
11” Dia.
1’-4.5”
Material Product Style-_____ ILMARM Cast Iron Luminaire Armory Square _____ DLMARM Cast Ductile Iron Luminaire Armory Square _____ ALMARM Cast Aluminum Luminaire Armory Square Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ MV (Mercury Vapor) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)
___ 050/ (50 Watts)___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)
___ 150/ (150 Watts) ___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base ____ SF- Fluorescent ____ SB- Bi PinGlobes___ PS11-118 Clear Stippled polycarbonate ___ PW11- 118 White Stippled polycarbonate
___ PS19-199 Clear Stippled polycarbonate ___ PW19- 199 White Stippled polycarbonate
___ PS07-107 Clear Stippled polycarbonate
___ PF83-118 Refractive type III poly./118 top/lite lid ___ PF93-118 Refractive type III poly./199 top/litelid
___ PF85- 118 Refractive type V poly./118 top/lite lid ___ PF95-118Refractive type V poly./199 top/ litelid
___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe
___ PR18- 18” Dia. Poly. Clear Ball Globe ___ PW18- 18” Dia. Poly. White Ball Globe
___ PR20- 20” Dia. Poly. Clear Ball Globe ___ PW20- 20” Dia. Poly. White Ball Globe
___ AF83-118 Refractive type III acrylic/118 top/lite lid ___ AF93-118 Refractive type III acrylic/199 top/litelid
___ AF85- 118 Refractive type V acrylic/118 top/lite lid ___ AF95-118 Refractive type V acrylic /199 top/ litelid
___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe
___ AR18- 18” Dia. Acrylic Clear Ball Globe ___ AW18- 18” Dia. Acrylic White Ball Globe
___ AR20- 20” Dia. Acrylic Clear Ball Globe ___ AW20- 20” Dia. Acrylic White Ball Globe
Refractor / Reflectors___ HC3- Horizontal Cut off/III ___ HN3- Horizontal Non-cutoff/III___ HC5- Horizontal Cut off/V ___ HN5- Horizontal Non-cut off/V___ VC3- Vertical Cut off / III ___ VN3- Vertical Non-cut off / III___ VC5- Vertical Cut off / V ___ VN5- Vertical Non-cut off / V___ HSF- House side shield Flat ___ HSC- House side shield Curved___ L6 3- Refractor 6” Type III ___ L6 5- Refractor 6” Type V___ L 82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials___ FPP- 110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications___ BH- Band plain w/ rosettes ___ BE- Band plain less rosettes___ BS- Band for reflector ___ HS- House side shield___ TB- Tarboro struts and rings ___ WT-GL30 Spun top___ WW- Washington Spun top ___ AS- Armory Square Spun top___ BT- Button type photo control
Coatings___ UF Unfinished ___ PO Prime Painted only___ CB Classic Black Finish ___ BG Bottle Green Finish___ DB Dark Bronze Finish ___ GI Grey Iron Finish___ LB Long Beach Blue Finish ___ VG Verde Green Finish___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 22
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Refractors / Reflectors - Finial - CoatingsI LM ARM - MH100 / Q V1 / SD - F83 - HSF - FPA - CB
OrderingGuide Iron Luminaire Armory Square- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Refractive 118 - House side sheild - 110 Finial - Classic Black Finish
LMARM-IN/V1/SD-W16-FG3-WT-CB
LMARM-MH070/SV1/SD-R16-L65-BG
LMARM-MH050/SV1/SD-S07-L63-FPP-DB
LMARM-HP150/QV1/SD-S19-HN3-FSB-BS-DB
LMARM-HP100/SV4/SD-S07-L65-FEG-WW-CB
3’-2
.25”
16”
LMARM-HP250/QV1/SM-F93-CB
LMARM-MH070/SV1/SD-S19-L65-FG3-BG
LMARM-MH050/SV1/SD-F83-FPP-DB
LMARM-HP150/QV1/SD-S11-L82-FPP-TB-DB
LMARM-HP100/SV4/SD-S1-L85-FPA-AS-CB
2’-8
”
20” 16.25” 16.25” 16.5”
3’-0
.75”
3’-6
.25”
3’-1
.75”
18.25”
3’-6
”
16.5”
3’-6
”
3’-6
”
16.5”16”
3’-2
.5”
2’-1
0.75
”
16”
Meriden Style LuminaireCatalog No.: LMMRD
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 2
S p e c i f i c a t i o n
Description
The Meriden style luminaire shall consist of a cast drative casing, a ballast socket assembly, and globe. globes and decorative elements as well as optical systavailable vary. Details on these options are detailed onnext page.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 8.75”.
Material
The luminaire casing is of one piece heavy wall cast minum per A.S.T.M. B26-95 Alloy SR356. Other maals are available, gray iron per A.S.T.M. A48, or duiron per A.S.T.M. A536. The luminaire is supplied weither a porcelain medium or mogul base socket. hardware is stainless steel. All components are UL lis
Light Source
Luminaires are UL listed for wet location and are nished as required with a High Intensity Discharge balThe ballasts are high power factor core and coil type are available in a wide range of sources and voltages. the following page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is 3.5” x 3” High. Consult factory for other tenon sizes.
2’-6
.75”
8.75
”
6.75” Dia.
Casing accepts a 3.5” Dia. x 3” HighTenon (Consult factory for other tenon sizesavailable)
11” Dia.
1’-4”
Material Product Style-_____ ILMMRD Cast Iron Luminaire Meriden _____ DLMMRD Cast Ductile Iron Luminaire Meriden _____ ALMMRD Cast Aluminum Luminaire Meriden Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ MV (Mercury Vapor) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)
___ 050/ (50 Watts)___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)
___ 150/ (150 Watts) ___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base ____ SF- Fluorescent ____ SB- Bi PinGlobes___ PS11-118 Clear Stippled polycarbonate ___ PW11- 118 White Stippled polycarbonate
___ PS19-199 Clear Stippled polycarbonate ___ PW19- 199 White Stippled polycarbonate
___ PS07-107 Clear Stippled polycarbonate
___ PF83-118 Refractive type III poly./118 top/lite lid ___ PF93-118 Refractive type III poly./199 top/litelid
___ PF85- 118 Refractive type V poly./118 top/lite lid ___ PF95-118Refractive type V poly./199 top/ litelid
___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe
___ PR18- 18” Dia. Poly. Clear Ball Globe ___ PW18- 18” Dia. Poly. White Ball Globe
___ PR20- 20” Dia. Poly. Clear Ball Globe ___ PW20- 20” Dia. Poly. White Ball Globe
___ AF83-118 Refractive type III acrylic/118 top/lite lid ___ AF93-118 Refractive type III acrylic/199 top/litelid
___ AF85- 118 Refractive type V acrylic/118 top/lite lid ___ AF95-118 Refractive type V acrylic /199 top/ litelid
___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe
___ AR18- 18” Dia. Acrylic Clear Ball Globe ___ AW18- 18” Dia. Acrylic White Ball Globe
___ AR20- 20” Dia. Acrylic Clear Ball Globe ___ AW20- 20” Dia. Acrylic White Ball Globe
Refractor / Reflectors
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ HSF- House side shield Flat ___ HSC- House side shield Curved
___ L6 3- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L 82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials___ FPP-110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications___ BH- Band plain w/ rosettes ___ BE- Band plain less rosettes
___ BS- Band for reflector ___ HS- House side shield
___ TB- Tarboro struts and rings ___ WT-GL30 Spun top
___ WW- Washington Spun top ___ AS- Armory Square Spun top
___ BT- Button type photo control
Coatings___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 24
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Refractors / Reflectors - - CoatingsI LM MRD - MH100 / Q V1 / SD - F83 - HSF - CB
OrderingGuide Iron Luminaire Meriden- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Refractive 118 - House side sheild - Classic Black Finish
LMMRD-IN/V1/SD-W16-FG3-WT-CB
LMMRD-MH070/SV1/SD-R16-L65-BG
LMMRD-MH050/SV1/SD-S07-L63-FPP-DB
LMMRD-HP150/QV1/SD-S19-HN3-FSB-BS-DB
LMMRD-HP100/SV4/SD-S07-L65-FEG-WW-CB
2’-1
0.25
”16”
LMMRD-HP250/QV1/SM-F93-FPP-CB
LMMRD-MH070/SV1/SD-S19-L65-BG
LMMRD-MH050/SV1/SD-F83-FPP-DB
LMMRD-HP150/QV1/SD-S11-L82-FP-TB-DB
LMMRD-HP100/SV4/SD-S1-L85-FPA-AS-CB
14”
20” 16.25”
15.5” 16” 16.5”
16.25”
16.5”
16.5”
2’-3
.75”
2’-8
.75”
2’-7
.5”
2’-6
.25” 3’-8
.25”
3’-2
.25”
3’-2
”
2’-9
.25”
2’-1
1.5”
Dunmore Style LuminaireCatalog No.: LMDNM
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 2
S p e c i f i c a t i o n
Description
The Dunmore style luminaire shall consist of a cast drative casing, a ballast socket assembly, and globe. globes and decorative elements as well as optical systavailable vary. Details on these options are detailed onnext page.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 5.25”.
Material
The luminaire casing is of one piece heavy wall cast minum per A.S.T.M. B26-95 Alloy SR356. Other maals are available, gray iron per A.S.T.M. A48, or duiron per A.S.T.M. A536. The luminaire is supplied weither a 4KV porcelain medium or mogul base socket.hardware is stainless steel. All components are UL lis
Light Source
Luminaires are UL listed for wet location and are nished as required with a High Intensity Discharge balThe ballasts are high power factor core and coil type are available in a wide range of sources and voltages. the following page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is 3.5” x 2” High. Consult factory for other tenon sizes.
3’-0
.25”
5.25
”
5.375” Dia.
Casing accepts a 3.5” Dia. x 2”High Tenon (Consult factory forother tenon sizes available)
1’-0” Dia.
1’-4”
Material Product Style-_____ ILM DNM- Cast Iron Luminaire Dunmore _____ DLM DNM- Cast Ductile Iron Luminaire Dunmore _____ ALM DNM- Cast Aluminum Luminaire Dunmore Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ MV (Mercury Vapor) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)
___ 050/ (50 Watts)___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)
___ 150/ (150 Watts) ___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base ____ SF- Fluorescent ____ SB- Bi PinGlobes___ PS11-118 Clear Stippled polycarbonate ___ PW11- 118 White Stippled polycarbonate
___ PS19-199 Clear Stippled polycarbonate ___ PW19- 199 White Stippled polycarbonate
___ PS07-107 Clear Stippled polycarbonate
___ PF83-118 Refractive type III poly./118 top/lite lid ___ PF93-118 Refractive type III poly./199 top/litelid
___ PF85- 118 Refractive type V poly./118 top/lite lid ___ PF95-118Refractive type V poly./199 top/ litelid
___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe
___ PR18- 18” Dia. Poly. Clear Ball Globe ___ PW18- 18” Dia. Poly. White Ball Globe
___ PR20- 20” Dia. Poly. Clear Ball Globe ___ PW20- 20” Dia. Poly. White Ball Globe
___ AF83-118 Refractive type III acrylic/118 top/lite lid ___ AF93-118 Refractive type III acrylic/199 top/litelid
___ AF85- 118 Refractive type V acrylic/118 top/lite lid ___ AF95-118 Refractive type V acrylic /199 top/ litelid
___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe
___ AR18- 18” Dia. Acrylic Clear Ball Globe ___ AW18- 18” Dia. Acrylic White Ball Globe
___ AR20- 20” Dia. Acrylic Clear Ball Globe ___ AW20- 20” Dia. Acrylic White Ball Globe
Refractor / Reflectors
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ HSF- House side shield Flat ___ HSC- House side shield Curved
___ L6 3- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L 82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials___ FPP- 110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications___ BH- Band plain w/ rosettes ___ BE- Band plain less rosettes
___ BS- Band for reflector ___ HS- House side shield
___ TB- Tarboro struts and rings ___ WT-GL30 Spun top
___ WW- Washington Spun top ___ AS- Armory Square Spun top
___ BT- Button type photo control
Coatings___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 26
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Refractors / Reflectors - Finial - CoatingsI LM DNM - MH100 / Q V1 / SD - F83 - HSF - FPA - CB
OrderingGuide Iron Luminaire Dunmore- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Refractive 118 - House side sheild - 110 Finial - Classic Black Finish
LMDNM-IN/V1/SD-W16-FG3-WT-CB
LMDNM-MH070/SV1/SD-R16-L65-BG
LMDNM-MH050/SV1/SD-S07-L63-FPP-DB
LMDNM-HP150/QV1/SD-S19-HN3-FSB-BS-DB
LMDNM-HP100/SV4/SD-S07-L65-WW-CB
2’-6
.75”
16”
LMDNM-HP250/QV1/SM-F93-CB
LMDNM-MH070/SV1/SD-S19-L65-BG
LMDNM-MH050/SV1/SD-F83-FPP-DB
LMDNM-HP150/QV1/SD-S11-L82-FPP-TB-DB
LMDNM-HP100/SV4/SD-S1-L85-FPA-AS-CB
2’-0
.5”
20” 16.25” 16.25” 16.5”
18.25”16.5”15.5”16” 16”
2’-5
.25”
3’-0
.5”
2’-2
.5”
2’-6
”2’
-10.
5”
2’-1
0.5”
2’-2
.75”
2’-3
.5”
Villa Style LuminaireCatalog No.: LMVLL
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 2
S p e c i f i c a t i o n
Description
The Villa style luminaire shall consist of a cast decoracasing, a ballast socket assembly, and globe. The gloand decorative elements as well as optical systems avable vary. Details on these options are detailed on the npage.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 3.75”.
Material
The luminaire casing is of one piece heavy wall cast minum per A.S.T.M. B26-95 Alloy SR356. Other maals are available, gray iron per A.S.T.M. A48, or duiron per A.S.T.M. A536. The luminaire is supplied weither a porcelain medium or mogul base socket. hardware is stainless steel. All components are UL lis
Light Source
Luminaires are UL listed for wet location and are nished as required with a High Intensity Discharge balThe ballasts are high power factor core and coil type are available in a wide range of sources and voltages. the following page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is 7” x .75” High. Consult factory for other tenon sizes.
2’-9
”
3.75
”
7.625” Dia.
Casing accepts a 7” Dia. x .75”High Tenon (Consult factory forother tenon sizes available)
11.25” Dia.
1’-6.25”
Material Product Style-_____ ILMVLL Cast Iron Luminaire Villa _____ DLMVLL Cast Ductile Iron Luminaire Villa _____ ALMVLL Cast Aluminum Luminaire Villa Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ MV (Mercury Vapor) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)
___ 050/ (50 Watts)___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)
___ 150/ (150 Watts) ___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base ____ SF- Fluorescent ____ SB- Bi PinGlobes___ PS11-118 Clear Stippled polycarbonate ___ PW11- 118 White Stippled polycarbonate
___ PS19-199 Clear Stippled polycarbonate ___ PW19- 199 White Stippled polycarbonate
___ PS07-107 Clear Stippled polycarbonate
___ PF83-118 Refractive type III poly./118 top/lite lid ___ PF93-118 Refractive type III poly./199 top/litelid
___ PF85- 118 Refractive type V poly./118 top/lite lid ___ PF95-118Refractive type V poly./199 top/ litelid
___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe
___ PR18- 18” Dia. Poly. Clear Ball Globe ___ PW18- 18” Dia. Poly. White Ball Globe
___ PR20- 20” Dia. Poly. Clear Ball Globe ___ PW20- 20” Dia. Poly. White Ball Globe
___ AF83-118 Refractive type III acrylic/118 top/lite lid ___ AF93-118 Refractive type III acrylic/199 top/litelid
___ AF85- 118 Refractive type V acrylic/118 top/lite lid ___ AF95-118 Refractive type V acrylic /199 top/ litelid
___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe
___ AR18- 18” Dia. Acrylic Clear Ball Globe ___ AW18- 18” Dia. Acrylic White Ball Globe
___ AR20- 20” Dia. Acrylic Clear Ball Globe ___ AW20- 20” Dia. Acrylic White Ball Globe
Refractor / Reflectors
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ HSF- House side shield Flat ___ HSC- House side shield Curved
___ L6 3- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L 82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials
___ FPP- 110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications
___ BH- Band plain w/ rosettes ___ BE- Band plain less rosettes
___ BS- Band for reflector ___ HS- Heat shield
___ TB- Tarboro struts and rings ___ WT-GL30 Spun top
___ WW- Washington Spun top ___ AS- Armory Square Spun top
___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 28
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Finial -Modifications - CoatingsI LM VLL - MH100 / Q V1 / SD - PF83 - FPA -TB - CB
OrderingGuide Iron Luminaire Villa- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Refractive 118 - 110 Finial -Tarboro Strut and Ring - Classic Black Finish
LMVLL-IN/V1/SD-PW16-FG3-WT-CB
LMVLL-MH070/SV1/SD-AR18-L85-BG
LMVLL-MH050/SV1/SD-PS07-L63-FPP-DB
LMVLL-HP150/QV1/SD-PS19-FSB-BS-DB
LMVLL-HP100/SV4/SD-PS07-L82-FEG-WW-CB
2’-5
.25”
16”
LMVLL-HP250/QV1/SM-AF93-CB
LMVLL-MH070/SV1/SD-PF95-FG3-BG
LMVLL-MH050/SV1/SD-PF83-FPP-DB
LMVLL-HP150/QV1/SD-AF85-WW-DB
LMVLL-HP100/SV4/SD-PS11-VC3-FPA-AS-CB
1’-8
.75”
2’-3
.75”
2’-9
.25”
2’-4
.5”
2’-6
.5”
2’-9
”
2’-9
”
2’-5
.25”
2’-1
.75”
18” 16.25” 16.25” 16.5”
16.5”16.5”16.5”16”16”
Villanova Style LuminaireCatalog No.: LMVLN
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 2
S p e c i f i c a t i o n
Description
The Villanova style luminaire shall consist of a cast drative casing, a ballast socket assembly, and globe. globes and decorative elements as well as optical systavailable vary. Details on these options are detailed onnext page.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 3.75”.
Material
The luminaire casing is of one piece heavy wall cast minum per A.S.T.M. B26-95 Alloy SR356. Other maals are available, gray iron per A.S.T.M. A48, or duiron per A.S.T.M. A536. The luminaire is supplied weither a 4KV porcelain medium or mogul base socket.hardware is stainless steel. All components are UL lis
Light Source
Luminaires are UL listed for wet location and are nished as required with a High Intensity Discharge balThe ballasts are high power factor core and coil type are available in a wide range of sources and voltages. the following page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is 7” x .75” High. Consult factory for other tenon sizes.
2’-5
.25”
3.75
”
7.625” Dia.
Casing accepts a 7” Dia. x .75”High Tenon (Consult factory forother tenon sizes available)
11.25” Dia.
1’-4”
Material Product Style-_____ ILM VLN- Cast Iron Luminaire Villanova _____ DLM VLN- Cast Ductile Iron Luminaire Villanova_____ ALM VLN- Cast Aluminum Luminaire VillanovaSource___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ MV (Mercury Vapor) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)
___ 050/ (50 Watts)___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)
___ 150/ (150 Watts) ___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base ____ SF- Fluorescent ____ SB- Bi PinGlobes___ PS11-118 Clear Stippled polycarbonate ___ PW11- 118 White Stippled polycarbonate
___ PS19-199 Clear Stippled polycarbonate ___ PW19- 199 White Stippled polycarbonate
___ PS07-107 Clear Stippled polycarbonate
___ PF83-118 Refractive type III poly./118 top/lite lid ___ PF93-118 Refractive type III poly./199 top/litelid
___ PF85- 118 Refractive type V poly./118 top/lite lid ___ PF95-118Refractive type V poly./199 top/ litelid
___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe
___ PR18- 18” Dia. Poly. Clear Ball Globe ___ PW18- 18” Dia. Poly. White Ball Globe
___ PR20- 20” Dia. Poly. Clear Ball Globe ___ PW20- 20” Dia. Poly. White Ball Globe
___ AF83-118 Refractive type III acrylic/118 top/lite lid ___ AF93-118 Refractive type III acrylic/199 top/litelid
___ AF85- 118 Refractive type V acrylic/118 top/lite lid ___ AF95-118 Refractive type V acrylic /199 top/ litelid
___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe
___ AR18- 18” Dia. Acrylic Clear Ball Globe ___ AW18- 18” Dia. Acrylic White Ball Globe
___ AR20- 20” Dia. Acrylic Clear Ball Globe ___ AW20- 20” Dia. Acrylic White Ball Globe
Refractor / Reflectors
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ HSF- House side shield Flat ___ HSC- House side shield Curved
___ L6 3- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L 82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials
___ FPP- 110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications
___ BH- Band plain w/ rosettes ___ BE- Band plain less rosettes
___ BS- Band for reflector ___ HS- House side shield
___ TB- Tarboro struts and rings ___ WT-GL30 Spun top
___ WW- Washington Spun top ___ AS- Armory Square Spun top
___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 30
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Finial - Modifications - CoatingsI LM VLN - MH100 / Q V1 / SD - PW16 - FG3 -WT - CB
OrderingGuide Iron Luminaire Villanova-100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -16” Dia. Poly. White Ball Globe-GL30 Finial -GL30 Spun Top-Classic Black Finish
LMVLN-IN/V1/SD-AR20-STR-CB
LMVLN-MH070/SV1/SD-AR16-L65-BG
LMVLN-MH050/SV1/SD-PS07-L85-FPP-DB
LMVLN-HP150/QV1/SD-PS19-FSB-BS-DB
LMVLN-HP100/SV4/SD-PS07-L65-FEG-WW-CB
1’-6
.75”
16”
LMVLN-HP250/QV1/SM-AF93-CB
LMVLN-MH070/SV1/SD-PS19-L65-BG
LMVLN-MH050/SV1/SD-AF83-FPP-DB
LMVLN-HP150/QV1/SD-PS11-L82-FPP-TB-DB
LMVLN-HP100/SV4/SD-PS11-VC5-FPA-AS-CB
16”
20” 16.25”
15.5” 16”
16.25”
16.5” 18.25”
16.5”
2’-3
.75”
1’-1
0.75
”
2’-9
.25”
2’-4
.5”
2’-1
.75”
2’-1
.25”
2’-1
0.75
”
2’-9
”
2’-9
”
Mariner Style LuminaireCatalog No.: LMMRN
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 3
S p e c i f i c a t i o n
Description
The Mariner style luminaire shall consist of a cast dective casing, a ballast socket assembly, and globe. globes and decorative elements as well as optical systavailable vary. Details on these options are detailed onnext page.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 5”.
Material
The luminaire casing is of heavy wall cast aluminumA.S.T.M. B26-95 Alloy SR356. The luminaire is suppwith either a porcelain medium or mogul base socket.hardware is stainless steel. All components are UL lis
Light Source
Luminaires are UL listed for wet location and are nished as required with a High Intensity Discharge balThe ballasts are high power factor core and coil type are available in a wide range of sources and voltages. the following page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is Pipe Nipple. Consult factory for other tenon sizes.
1’-8
”
5”
6” Dia.
Casing accepts a 1/2” Pipe Nipple(Consult factory for other tenon sizes avail-able)
8.75” Dia.
1’-4”
Material Product Style-_____ ALMMRN Cast Aluminum Luminaire Mariner Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ MV (Mercury Vapor) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)
___ 050/ (50 Watts)___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)
___ 150/ (150 Watts) ___ 175/ (175 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base ____ SF- Fluorescent ____ SB- Bi PinGlobes___ PS11-118 Clear Stippled polycarbonate ___ PW11- 118 White Stippled polycarbonate
___ PS19-199 Clear Stippled polycarbonate ___ PW19- 199 White Stippled polycarbonate
___ PS07-107 Clear Stippled polycarbonate ___ PS92- 192 Clear Stippled polycarbonate
___ PF83-118 Refractive type III poly./118 top/lite lid ___ PF93-118 Refractive type III poly./199 top/litelid
___ PF85- 118 Refractive type V poly./118 top/lite lid ___ PF95-118Refractive type V poly./199 top/ litelid
___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe
___ PR18- 18” Dia. Poly. Clear Ball Globe ___ PW18- 18” Dia. Poly. White Ball Globe
___ PR20- 20” Dia. Poly. Clear Ball Globe ___ PW20- 20” Dia. Poly. White Ball Globe
___ AF83-118 Refractive type III acrylic/118 top/lite lid ___ AF93-118 Refractive type III acrylic/199 top/litelid
___ AF85- 118 Refractive type V acrylic/118 top/lite lid ___ AF95-118 Refractive type V acrylic /199 top/ litelid
___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe
___ AR18- 18” Dia. Acrylic Clear Ball Globe ___ AW18- 18” Dia. Acrylic White Ball Globe
___ AR20- 20” Dia. Acrylic Clear Ball Globe ___ AW20- 20” Dia. Acrylic White Ball Globe
Refractor / Reflectors
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ HSF- House side shield Flat ___ HSC- House side shield Curved
___ L6 3- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L 82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials
___ FPP- 110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications
___ BH- Band plain w/ rosettes ___ BE- Band plain less rosettes
___ BS- Band for reflector ___ HS- Heat shield
___ TB- Tarboro struts and rings ___ WT-GL30 Spun top
___ WW- Washington Spun top ___ AS- Armory Square Spun top
___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 32
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Refractors / Reflectors - CoatingsA LM MRN - MH100 / Q V1 / SD - AR16 - L63 - CB
OrderingGuide AluminumLuminaire Mariner- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -16”Dia. Acrylic Clear Ball Globe -Refractor 6” Type III - Classic Black Finish
LMMRN-IN/V1/SD-PW16-FG3-WT-CB
LMMRN-MH070/SV1/SD-AR18-L65-BG
LMMRN-MH050/SV1/SD-OS07-L63-FPP-DB
LMMRN-HP150/QV1/SD-PS19-FSB-BS-DB
LMMRN-HP100/SV4/SD-PS07-L65-FEG-WW-CB
2’-6
.5”
16”
LMMRN-HP250/QV1/SM-AF93-CB
LMMRN-MH070/SV1/SD-AF95-FG3-BG
LMMRN-MH050/SV1/SD-PF83-FPP-DB
LMMRN-HP150/QV1/SD-PS92-L63-FPP-DB
LMMRN-HP100/SV4/SD-PS11-VC3-FPA-AS-CB
18” 16.25” 16.25”
16” 16” 16.5” 16.5” 14.25”
16.5”
2’-5
”
1’-1
0” 2’-1
0.75
”
2’-6
”
2’-3
”
2’-6
.75”
2’-1
0.25
”
2’-1
0.25
”
2’-7
”
Charleston Sr. Style LuminaireCatalog No.: LMCHL
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 3
S p e c i f i c a t i o n
Description
The Charleston Sr. style luminaire shall consist of a decorative casing, a ballast socket assembly, and glThe globes and decorative elements as well as optical tems available vary. Details on these options are detaon the next page.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 4”.
Material
The luminaire casing is of one piece heavy wall cast minum per A.S.T.M. B26-95 Alloy SR356. The luminis supplied with either a porcelain medium or mogul bsocket. All hardware is stainless steel. All componare UL listed.
Light Source
Luminaires are UL listed for wet location and are nished as required with a High Intensity Discharge balThe ballasts are high power factor core and coil type are available in a wide range of sources and voltages. the following page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is 2.8Dia. x 1.5” High. Consult factory for other tenon size
2’-3
.5”
4.87
5”
3.625” Dia.
Casing accepts a 2.875”Dia. x 1.5” High Tenon(Consult factory for other tenonsizes available)
9.75” Dia.
1’-4”
Material Product Style-_____ ALMCHL Cast Aluminum Luminaire Charleston Sr.Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ MV (Mercury Vapor) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)
___ 050/ (50 Watts)___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)
___ 150/ (150 Watts) ___ 175/ (175 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base ____ SF- Fluorescent ____ SB- Bi PinGlobes___ PS11-118 Clear Stippled polycarbonate ___ PW11- 118 White Stippled polycarbonate
___ PS19-199 Clear Stippled polycarbonate ___ PW19- 199 White Stippled polycarbonate
___ PS09-109 Clear Stippled polycarbonate ___ PS92-192 Clear Stippled polycarbonate
___ PF83-118 Refractive type III poly./118 top/lite lid ___ PF93-118 Refractive type III poly./199 top/litelid
___ PF85- 118 Refractive type V poly./118 top/lite lid ___ PF95-118Refractive type V poly./199 top/ litelid
___ PR14- 14” Dia. Poly. Clear Ball Globe ___ PW14- 14” Dia. Poly. White Ball Globe
___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe
___ PR18- 18” Dia. Poly. Clear Ball Globe ___ PW18- 18” Dia. Poly. White Ball Globe
___ AF83-118 Refractive type III acrylic/118 top/lite lid ___ AF93-118 Refractive type III acrylic/199 top/litelid
___ AF85- 118 Refractive type V acrylic/118 top/lite lid ___ AF95-118 Refractive type V acrylic /199 top/ litelid
___ AR14- 14” Dia. Acrylic Clear Ball Globe ___ AW14- 14” Dia. Acrylic White Ball Globe
___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe
___ AR18- 18” Dia. Acrylic Clear Ball Globe ___ AW18- 18” Dia. Acrylic White Ball Globe
Refractor / Reflectors
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ HSF- House side shield Flat ___ HSC- House side shield Curved
___ L6 3- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L 82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials
___ FPP- 110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications
___ BH- Band plain w/ rosettes ___ BE- Band plain less rosettes
___ BS- Band for reflector ___ HS- Heat shield
___ TB- Tarboro struts and rings ___ WT-GL30 Spun top
___ WW- Washington Spun top ___ AS- Armory Square Spun top
___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 34
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Refractors / Reflectors - CoatingsA LM CHL - MH100 / Q V1 / SD - PF93 - HSF - CB
OrderingGuide Aluminum Luminaire Charleston Sr.- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Refractive 118 - House side sheild - Classic Black Finish
LMCHL-IN/V1/SD-PW14-FG3-WT-CB
LMCHL-MH050/SV1/SD-PR16-DB
LMCHL-MH070/SV1/SD-AR18-L65-BG
LMCHL-HP150/QV1/SD-PS09-L63-FG3-DB
LMCHL-HP100/SV4/SD-PS09-CB
2’-4
.25”
14”
LMCHL-HP070/QV1/SM-PS92-FPP-CB
LMCHL-MH050/SV1/SD-PW19-DB
LMCHL-MH070/SV1/SD-PS19-L65-FSB-BH-BG
LMCHL-HP100/QV1/SD-PF93-FPP-CB
LMCHL-HP150/SV4/SD-PS11-VC3-FPA-AS-DB
1’-8
”
18”
1’-1
0”
16” 13”
1’-9
.75”
2’-1
.25”
13”
3’-0
.5”
16.5” 16”
2’-1
0”
2’-5
.75”
2’-3
.25”
15.5” 16.5”
2’-6
”
14”
Form F Style LuminaireCatalog No.: LMFRM
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 3
S p e c i f i c a t i o n
Description
The Form F style luminaire shall consist of a cast dective casing, a ballast socket assembly, and globe. globes and decorative elements as well as optical systavailable vary. Details on these options are detailed onnext page.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 7”.
Material
The luminaire casing is of one piece heavy wall cast minum per A.S.T.M. B26-95 Alloy SR356. Other maals are available, gray iron per A.S.T.M. A48, or duiron per A.S.T.M. A536. The luminaire is supplied weither a porcelain medium or mogul base socket. hardware is stainless steel. All components are UL lis
Light Source
Luminaires are UL listed for wet location and are nished as required with a High Intensity Discharge balThe ballasts are high power factor core and coil type are available in a wide range of sources and voltages. the following page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is 2.8Dia. x 2” High. Consult factory for other tenon sizes
2’-9
”
7”
4.25” Dia.
Casing accepts a 2.875” Dia. x2” High Tenon (Consult factory forother tenon sizes available)
8.875” Dia.
1’-3.5”
Material Product Style-_____ ILMFRM Cast Iron Luminaire Form F _____ DLMFRM Cast Ductile Iron Luminaire Form F _____ ALMFRM Cast Aluminum Luminaire Form F Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ MV (Mercury Vapor) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)
___ 050/ (50 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base ____ SF- Fluorescent ____ SB- Bi PinGlobes ___ PS09-109 Clear Stippled polycarbonate
___ PS11-118 Clear Stippled polycarbonate ___ PW11- 118 White Stippled polycarbonate
___ PS19-199 Clear Stippled polycarbonate ___ PW19- 199 White Stippled polycarbonate
___ PS07-107 Clear Stippled polycarbonate ___ PS92-192 Clear Stippled polycarbonate
___ PF83-118 Refractive type III poly./118 top/lite lid ___ PF93-118 Refractive type III poly./199 top/litelid
___ PF85- 118 Refractive type V poly./118 top/lite lid ___ PF95-118Refractive type V poly./199 top/ litelid
___ PR14- 14” Dia. Poly. Clear Ball Globe ___ PW14- 14” Dia. Poly. White Ball Globe
___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe
___ PR18- 18” Dia. Poly. Clear Ball Globe ___ PW18- 18” Dia. Poly. White Ball Globe
___ AF83-118 Refractive type III acrylic/118 top/lite lid ___ AF93-118 Refractive type III acrylic/199 top/litelid
___ AF85- 118 Refractive type V acrylic/118 top/lite lid ___ AF95-118 Refractive type V acrylic /199 top/ litelid
___ AR14- 14” Dia. Acrylic Clear Ball Globe ___ AW14- 14” Dia. Acrylic White Ball Globe
___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe
___ AR18- 18” Dia. Acrylic Clear Ball Globe ___ AW18- 18” Dia. Acrylic White Ball Globe
Refractor / Reflectors
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ HSF- House side shield Flat ___ HSC- House side shield Curved
___ L6 3- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L 82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials
___ FPP- 110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications
___ BH- Band plain w/ rosettes ___ BE- Band plain less rosettes
___ BS- Band for reflector ___ HS- Heat shield
___ TB- Tarboro struts and rings ___ WT-GL30 Spun top
___ WW- Washington Spun top ___ AS- Armory Square Spun top
___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 36
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Refractors / Reflectors - Finial - CoatingsI LM FRM - MH100 / Q V1 / SD - PS19 - L63 - FSB - CB
OrderingGuide Iron Luminaire Form F- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -199 Clear Stip. Poly.- Ref. 6” Type 3 - Small Brass Finial - Classic Black Finish
LMFRM-IN/V1/SD-PW16-FG3-WT-CB
LMFRM-MH070/SV1/SD-PS19-L65-BG
LMFRM-MH050/SV1/SD-PS09-L63-DB
LMFRM-HP150/QV1/SD-PS07-L63-FEG-WW-DB
LMFRM-HP100/SV4/SD-PS07-L65-FPP-CB
2’-8
.5”
16”
LMFRM-HP250/QV1/SM-PS19-L63-FSB-BH-CB
LMFRM-MH070/SV1/SD-AF93-BG
LMFRM-MH050/SV1/SD-PF83-FPP-DB
LMFRM-HP150/QV1/SD-PS92-DB
LMFRM-HP100/SV4/SD-PS11-VC3-FPA-AS-CB
2’-1
.75”
13.75”13”
2’-0
”
16.25”
2’-7
”
16.25”
2’-0
.75”
2’-4
”
14” 16.5”
3’-0
.25”
3’-0
.25”
16.5”
2’-5
”
16” 16.5”
2’-8
”
Saint Paul Style LuminaireCatalog No.: LMSPL
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 3
S p e c i f i c a t i o n
Description
The Saint Paul style luminaire shall consist of a cast orative casing, a ballast socket assembly, and globe. globes and decorative elements as well as optical systavailable vary. Details on these options are detailed onnext page.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 6.5”.
Material
The luminaire casing is of one piece heavy wall cast minum per A.S.T.M. B26-95 Alloy SR356. The luminis supplied with either a porcelain medium or mogul bsocket. All hardware is stainless steel. All componare UL listed.
Light Source
Luminaires are UL listed for wet location and are nished as required with a High Intensity Discharge balThe ballasts are high power factor core and coil type are available in a wide range of sources and voltages. the following page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is 2.8Dia. x 3” High. Consult factory for other tenon sizes
2’-7
.75”
6.5”
3.5” Dia.
Casing accepts a 2.875” Dia. x3” High Tenon (Consult factoryfor other tenon sizes available)
8.75” Dia.
1’-4”
Material Product Style-_____ ILMSPL Cast Iron Luminaire Saint Paul Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ MV (Mercury Vapor) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)
___ 050/ (50 Watts)___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base ____ SF- Fluorescent ____ SB- Bi PinGlobes ___ PS09-109 Clear Stippled polycarbonate
___ PS11-118 Clear Stippled polycarbonate ___ PW11- 118 White Stippled polycarbonate
___ PS19-199 Clear Stippled polycarbonate ___ PW19- 199 White Stippled polycarbonate
___ PS07-107 Clear Stippled polycarbonate ___ PS92-192 Clear Stippled polycarbonate
___ PF83-118 Refractive type III poly./118 top/lite lid ___ PF93-118 Refractive type III poly./199 top/litelid
___ PF85- 118 Refractive type V poly./118 top/lite lid ___ PF95-118Refractive type V poly./199 top/ litelid
___ PR14- 14” Dia. Poly. Clear Ball Globe ___ PW14- 14” Dia. Poly. White Ball Globe
___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe
___ PR18- 18” Dia. Poly. Clear Ball Globe ___ PW18- 18” Dia. Poly. White Ball Globe
___ AF83-118 Refractive type III acrylic/118 top/lite lid ___ AF93-118 Refractive type III acrylic/199 top/litelid
___ AF85- 118 Refractive type V acrylic/118 top/lite lid ___ AF95-118 Refractive type V acrylic /199 top/ litelid
___ AR14- 14” Dia. Acrylic Clear Ball Globe ___ AW14- 14” Dia. Acrylic White Ball Globe
___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe
___ AR18- 18” Dia. Acrylic Clear Ball Globe ___ AW18- 18” Dia. Acrylic White Ball Globe
Refractor / Reflectors
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ HSF- House side shield Flat ___ HSC- House side shield Curved
___ L6 3- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L 82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials
___ FPP- 110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications
___ BH- Band plain w/ rosettes ___ BE- Band plain less rosettes
___ BS- Band for reflector ___ HS- Heat shield
___ TB- Tarboro struts and rings ___ WT-GL30 Spun top
___ WW- Washington Spun top ___ AS- Armory Square Spun top
___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 38
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Refractors / Reflectors - Finial - CoatingsA LM SPL - MH100 / Q V1 / SD - F83 - HSF - FG3 - CB
OrderingGuide Aluminum Luminaire Saint Paul- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Refractive 118 - House side sheild - 110 Finial - Classic Black Finish
LMSPL-IN/V1/SD-PW16-CB
LMSPL-MH070/SV1/SD-PW14-BG
LMSPL-MH050/SV1/SD-PS92-L63-FPP-DB
LMSPL-HP070/QV1/SD-PS09-FG3-DB
LMSPL-HP100/SV4/SD-PS09-CB
1’-9
.5”
16”
LMSPL-HP100/QV1/SM-PS19-FSB-BH-CB
LMSPL-MH070/SV1/SD-PF93-BG
LMSPL-MH050/SV1/SD-PS19-DB
LMSPL-HP150/QV1/SD-PS11-FPA-DB
LMSPL-HP100/SV4/SD-PF83-FPP-CB
14”
1’-7
.5”
2’-7
.75”
14”13” 13”
1’-1
1.25
”
2’-2
.75”
2’-1
1.75
”
3’-1
.5”
16.5” 16”15.5”
2’-4
”
16”
2’-4
.5”
2’-7
.5”
16.5”
Regency Style LuminaireCatalog No.: LMRGN
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 3
S p e c i f i c a t i o n
Description
The Regency style luminaire shall consist of a cast drative casing, a ballast socket assembly, and globe. globes and decorative elements as well as optical systavailable vary. Details on these options are detailed onnext page.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 5.625”.
Material
The luminaire casing is of one piece heavy wall cast minum per A.S.T.M. B26-95 Alloy SR356. Other maals are available, gray iron per A.S.T.M. A48, or duiron per A.S.T.M. A536. The luminaire is supplied weither a porcelain medium or mogul base socket. hardware is stainless steel. All components are UL lis
Light Source
Luminaires are UL listed for wet location and are nished as required with a High Intensity Discharge balThe ballasts are high power factor core and coil type are available in a wide range of sources and voltages. the following page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is 3/8 cnipple. Consult factory for other tenon sizes.
1’-1
0”
5.62
5”
3.5” Dia.
Casing accepts a 3/8 close nip-ple (Consult factory for other tenon sizesavailable)
10.75” Dia.
1’-6”
Material Product Style-_____ ILMRGN Cast Iron Luminaire Regency _____ DLMRGN Cast Ductile Iron Luminaire Regency _____ ALMRGN Cast Aluminum Luminaire Regency Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ MV (Mercury Vapor) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)
___ 050/ (50 Watts)___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)
___ 150/ (150 Watts) ___ 175/ (175 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base ____ SF- Fluorescent ____ SB- Bi PinGlobes ___ PS92-192 Clear Stippled polycarbonate
___ PS11-118 Clear Stippled polycarbonate ___ PW11- 118 White Stippled polycarbonate
___ PS19-199 Clear Stippled polycarbonate ___ PW19- 199 White Stippled polycarbonate
___ PS07-107 Clear Stippled polycarbonate ___ PS66-166 Clear Stippled polycarbonate
___ PF83-118 Refractive type III poly./118 top/lite lid ___ PF93-118 Refractive type III poly./199 top/litelid
___ PF85- 118 Refractive type V poly./118 top/lite lid ___ PF95-118Refractive type V poly./199 top/ litelid
___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe
___ PR18- 18” Dia. Poly. Clear Ball Globe ___ PW18- 18” Dia. Poly. White Ball Globe
___ PR20- 20” Dia. Poly. Clear Ball Globe ___ PW20- 20” Dia. Poly. White Ball Globe
___ AF83-118 Refractive type III acrylic/118 top/lite lid ___ AF93-118 Refractive type III acrylic/199 top/litelid
___ AF85- 118 Refractive type V acrylic/118 top/lite lid ___ AF95-118 Refractive type V acrylic /199 top/ litelid
___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe
___ AR18- 18” Dia. Acrylic Clear Ball Globe ___ AW18- 18” Dia. Acrylic White Ball Globe
___ AR20- 20” Dia. Acrylic Clear Ball Globe ___ AW20- 20” Dia. Acrylic White Ball Globe
Refractor / Reflectors
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ HSF- House side shield Flat ___ HSC- House side shield Curved
___ L6 3- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L 82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials
___ FPP- 110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications
___ BH- Band plain w/ rosettes ___ BE- Band plain less rosettes
___ BS- Band for reflector ___ HS- Heat shield
___ TB- Tarboro struts and rings ___ WT-GL30 Spun top
___ WW- Washington Spun top ___ AS- Armory Square Spun top
___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 40
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - CoatingsI LM RGN - MH100 / Q V1 / SD - PR18 - CB
OrderingGuide Iron Luminaire Regency- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -18” Dia. Clear Polycarbonate Ball Globe - Classic Black Finish
LMRGN-IN/V1/SD-PS66-CB
LMRGN-MH070/SV1/SD-PR16-FG3-WT-BG
LMRGN-MH050/SV1/SD-PW18-L63-DB
LMRGN-HP150/QV1/SD-PS07-L63-FEG-WW-DB
LMRGN-HP100/SV4/SD-PS07-L65-FPP-CB
1’-4
.5”
12.5”
LMRGN-HP150/QV1/SM-PW19-FSB-BH-CB
LMRGN-MH070/SV1/SD-PF95-BG
LMRGN-MH050/SV1/SD-PS92-FPP-DB
LMRGN-HP150/QV1/SD-PS11-VC5-FPA-AS-DB
LMRGN-HP100/SV4/SD-PS11-L82-FPP-CB
16”
2’-7
.25”
1’-1
0.75
”
18”
2’-5
.75”
16.25” 16.25”
2’-1
1.25
”
16.5”
2’-1
0.75
”
2’-1
0.75
”
16.5”14”
2’-6
.75”
16”16.5”
2’-3
.75”
2’-6
.5”
Parkwood Style LuminaireCatalog No.: LMPKW
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 4
S p e c i f i c a t i o n
Description
The Parkwood style luminaire shall consist of a cast orative casing, a medium base socket and globe. globes and decorative elements as well as optical systavailable vary. Details on these options are detailed onnext page.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 6”.
Material
The luminaire casing is of one piece heavy wall cast minum per A.S.T.M. B26-95 Alloy SR356. Other maals are available, gray iron per A.S.T.M. A48, or duiron per A.S.T.M. A536. The luminaire is supplied wiporcelain medium base socket. All hardware is stainsteel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location. See the lowing page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is 3.5” x 3” High. Consult factory for other tenon sizes.
2’-5
”
6”
3.5” Dia.
Casing accepts a 3.5” Dia. x 3”High Tenon (Consult factory forother tenon sizes available)
8” Dia.
1’-4”
Material Product Style-_____ ILMPKW Cast Iron Luminaire Parkwood _____ DLMPKW Cast Ductile Iron Luminaire Parkwood _____ ALMPKW Cast Aluminum Luminaire Parkwood
Source___ IN (Incandescent) ___ CP (Compact Fluorescent) ___ XX (Modifier)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)___ 050/ (50 Watts) ___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)___ 150/ (150 Watts) ___ 175/ (175 Watts) ___ 200/ (200 Watts)___ 250/ (250 Watts)
Ballast Type___ N/A
Voltage____ V1/ 120 Volts
Sockets____ SD- Medium Base ____ SF- Fluorescent ____ SB- Bi Pin
Globes ___ PS97-197 Clear Stippled polycarbonate
___ PS11-118 Clear Stippled polycarbonate ___ PW11- 118 White Stippled polycarbonate___ PS19-199 Clear Stippled polycarbonate ___ PW19- 199 White Stippled polycarbonate___ PS07-107 Clear Stippled polycarbonate ___ PS92-192 Clear Stippled polycarbonate___ PF83-118 Refractive type III poly./118 top/lite lid ___ PF93-118 Refractive type III poly./199 top/litelid___ PF85- 118 Refractive type V poly./118 top/lite lid ___ PF95-118Refractive type V poly./199 top/ litelid___ PR14- 14” Dia. Poly. Clear Ball Globe ___ PW14- 14” Dia. Poly. White Ball Globe___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe___ PR18- 18” Dia. Poly. Clear Ball Globe ___ PW18- 18” Dia. Poly. White Ball Globe___ AF83-118 Refractive type III acrylic/118 top/lite lid ___ AF93-118 Refractive type III acrylic/199 top/litelid___ AF85- 118 Refractive type V acrylic/118 top/lite lid ___ AF95-118 Refractive type V acrylic /199 top/ litelid___ AR14- 14” Dia. Acrylic Clear Ball Globe ___ AW14- 14” Dia. Acrylic White Ball Globe___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe___ AR18- 18” Dia. Acrylic Clear Ball Globe ___ AW18- 18” Dia. Acrylic White Ball Globe
Refractor / Reflectors
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ HSF- House side shield Flat ___ HSC- House side shield Curved
___ L6 3- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L 82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials
___ FPP- 110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications
___ BH- Band plain w/ rosettes ___ BE- Band plain less rosettes
___ BS- Band for reflector ___ HS- Heat shield
___ TB- Tarboro struts and rings ___ WT-GL30 Spun top
___ WW- Washington Spun top ___ AS- Armory Square Spun top
___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 42
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Refractors / Reflectors - - CoatingsI LM PKW - IN150 / N/A V1 / SD - PS19 - HSF - CB
OrderingGuide Iron Luminaire Parkwood- 150 Watt Inc / N/A 120 Volts /Medium base -199 clear stippled poly. - House side sheild - Small Brass Finial- Classic Black Finish
LMPKW-IN/V1/SD-PW14-FG3-WT-CB
LMPKW-IN/V1/SD-PR16-L65-BG
LMPKW-IN/V1/SD-PS97-DB
LMPKW-IN/V1/SD-PS19-FSB-BH-DB
LMPKW-IN/V1/SD-PS92-CB
2’-5
.5”
14”
LMPKW-IN/V1/SD-PF93-CB
LMPKW-IN/V1/SD-PW19-L65-BG
LMPKW-IN/V1/SD-PF83-FPP-DB
LMPKW-IN/V1/SD-PS92-FPP-DB
LMPKW-IN/V1/SD-PS11-VC3-FPA-AS-CB
16” 13.75” 14.25”
16” 16” 16.5”
16.5”
14.25”
2’-1
”
1’-9
.5”
2’-3
.5”
2’-7
”
2’-5
”
2’-3
.75”
3’-1
.5”
2’-1
1.5”
2’-8
”
15.5”
Geneva Style LuminaireCatalog No.: LMGNV
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 4
S p e c i f i c a t i o n
Description
The Geneva style luminaire shall consist of a cast dective casing, a medium base socket and globe. The gloand decorative elements as well as optical systems avable vary. Details on these options are detailed on the npage.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 6.75”.
Material
The luminaire casing is of one piece heavy wall cast minum per A.S.T.M. B26-95 Alloy SR356. The luminis supplied with a porcelain medium base socket. hardware is stainless steel. All components are UL lis
Light Source
Luminaires are UL listed for wet location. See the lowing page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is 2.8Dia. x 3” High. Consult factory for other tenon sizes
1’7.
75”
6.75
”
3.75” Dia.
Casing accepts a 2.875” Dia. x3” High Tenon (Consult factory forother tenon sizes available)
9.25” Dia.
1’-2”
Material Product Style-_____ ALMGNV Cast Aluminum Luminaire Geneva
Source___ IN (Incandescent) ___ CP (Compact Fluorescent) ___ XX (Modifier)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)
___ 050/ (50 Watts) ___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)
___ 150/ (150 Watts) ___ 175/ (175 Watts) ___ 200/ (200 Watts)___ 250/ (250 Watts)
Ballast Type___ N/A
Voltage____ V1/ 120 Volts
Sockets____ SD- Medium Base ____ SF- Fluorescent ____ SB- Bi Pin
Globes___ PS11-118 Clear Stippled polycarbonate ___ PW11- 118 White Stippled polycarbonate
___ PS19-199 Clear Stippled polycarbonate ___ PW19- 199 White Stippled polycarbonate
___ PS07-107 Clear Stippled polycarbonate ___ PS92- 192 Clear Stippled polycarbonate
___ PF83-118 Refractive type III poly./118 top/lite lid ___ PF93-118 Refractive type III poly./199 top/litelid
___ PF85- 118 Refractive type V poly./118 top/lite lid ___ PF95-118Refractive type V poly./199 top/ litelid
___ PR12- 12” Dia. Poly. Clear Ball Globe ___ PW12- 12” Dia. Poly. White Ball Globe
___ PR14- 14” Dia. Poly. Clear Ball Globe ___ PW14- 14” Dia. Poly. White Ball Globe
___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe
___ AF83-118 Refractive type III acrylic/118 top/lite lid ___ AF93-118 Refractive type III acrylic/199 top/litelid
___ AF85- 118 Refractive type V acrylic/118 top/lite lid ___ AF95-118 Refractive type V acrylic /199 top/ litelid
___ AR12- 12” Dia. Acrylic Clear Ball Globe ___ AW12- 12” Dia. Acrylic White Ball Globe
___ AR14- 14” Dia. Acrylic Clear Ball Globe ___ AW14- 14” Dia. Acrylic White Ball Globe
___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe
Refractor / Reflectors
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ HSF- House side shield Flat ___ HSC- House side shield Curved
___ L6 3- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L 82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials
___ FPP- 110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications
___ BH- Band plain w/ rosettes ___ BE- Band plain less rosettes
___ BS- Band for reflector ___ HS- Heat shield
___ TB- Tarboro struts and rings ___ WT-GL30 Spun top
___ WW- Washington Spun top ___ AS- Armory Square Spun top
___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 44
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - CoatingsA LM GNV - IN / N/A V1 / SD - PW14 - CB
OrderingGuide Aluminum Luminaire Geneva- Inc / N/A 120 Volts /Medium base -14” Dia. Polycarbonate White Ball Globe - Classic Black Finish
LMGNV-IN/V1/SD-PW14-FG3-WT-CB
LMGNV-IN/V1/SD-PW12-BG
LMGNV-IN/V1/SD-PS07-FPP-DB
LMGNV-IN/V1/SD-PS19-FSB-BH-DB
LMGNV-IN/V1/SD-PS07-L65-FEG-WW-CB
1’-6
”
12”
LMGNV-IN/V1/SM-AF93-CB
LMGNV-IN/V1/SD-PS19-L65-BG
LMGNV-IN/V1/SD-PF83-FPP-DB
LMGNV-IN/V1/SD-PS92-FPP-DB
LMGNV-IN/V1/SD-PS11-FPA-AS-CB
14”
2’-6
”
2’-6
.75”
2’-5
.5”
2’-4
.25” 3’
-2”
16.25”
16” 15.5” 16”
16.25”
16.5” 14.25”
16.5”
3’-0
.5”
2’-7
.5”
3’-0
”
2’-8
.5”
Georgetown Style LuminaireCatalog No.: LMGRG
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 4
S p e c i f i c a t i o n
Description
The Georgetown style luminaire shall consist of a decorative casing, a medium base socket and globe. globes and decorative elements as well as optical systavailable vary. Details on these options are detailed onnext page.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 2.5”.
Material
The luminaire casing is of one piece heavy wall cast minum per A.S.T.M. B26-95 Alloy SR356. Other maals are available, gray iron per A.S.T.M. A48, or duiron per A.S.T.M. A536. The luminaire is supplied wiporcelain medium base socket. All hardware is stainsteel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location. See the lowing page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is 2.8Dia. x 2.5” High. Consult factory for other tenon size
2’-8
.25”
2.5”
5” Dia.
Casing accepts a 2.875” Dia. x2.5” High Tenon (Consult factoryfor other tenon sizes available)
9.5” Dia.
1’-4.5”
Material Product Style-_____ ILMGRG Cast Iron Luminaire Georgetown _____ DLMGRG Cast Ductile Iron Luminaire Georgetown _____ ALMGRG Cast Aluminum Luminaire Georgetown
Source___ IN (Incandescent) ___ CP (Compact Fluorescent) ___ XX (Modifier)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)___ 050/ (50 Watts) ___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)___ 150/ (150 Watts) ___ 175/ (175 Watts) ___ 200/ (200 Watts)___ 250/ (250 Watts)
Ballast Type___ N/A
Voltage____ V1/ 120 Volts
Sockets____ SD- Medium Base ____ SF- Fluorescent ____ SB- Bi Pin
Globes___ PS11-118 Clear Stippled polycarbonate ___ PW11- 118 White Stippled polycarbonate___ PS19-199 Clear Stippled polycarbonate ___ PW19- 199 White Stippled polycarbonate___ PS07-107 Clear Stippled polycarbonate ___ PS92- 192 Clear Stippled polycarbonate___ PF83-118 Refractive type III poly./118 top/lite lid ___ PF93-118 Refractive type III poly./199 top/litelid___ PF85- 118 Refractive type V poly./118 top/lite lid ___ PF95-118Refractive type V poly./199 top/ litelid___ PR14- 14” Dia. Poly. Clear Ball Globe ___ PW14- 14” Dia. Poly. White Ball Globe___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe___ PR18- 18” Dia. Poly. Clear Ball Globe ___ PW18- 18” Dia. Poly. White Ball Globe___ AF83-118 Refractive type III acrylic/118 top/lite lid ___ AF93-118 Refractive type III acrylic/199 top/litelid___ AF85- 118 Refractive type V acrylic/118 top/lite lid ___ AF95-118 Refractive type V acrylic /199 top/ litelid___ AR14- 14” Dia. Acrylic Clear Ball Globe ___ AW14- 14” Dia. Acrylic White Ball Globe___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe___ AR18- 18” Dia. Acrylic Clear Ball Globe ___ AW18- 18” Dia. Acrylic White Ball Globe
Refractor / Reflectors___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ HSF- House side shield Flat ___ HSC- House side shield Curved
___ L6 3- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L 82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials
___ FPP- 110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications
___ BH- Band plain w/ rosettes ___ BE- Band plain less rosettes
___ BS- Band for reflector ___ HS- Heat shield
___ TB- Tarboro struts and rings ___ WT-GL30 Spun top
___ WW- Washington Spun top ___ AS- Armory Square Spun top
___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 46
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Refractors / Reflectors - Finial - CoatingsI LM GRG - IN150 / N/A V1 / SD - PS11 - HSF - FPP - CB
OrderingGuide Iron Luminaire Georgetown- 150 Watt Inc / N/A 120 Volts /Medium base -118 clear stippled poly. - House side sheild - 110 Poly. Finial- Classic Black Finish
LMGRG-IN/V1/SD-PW14-FG3-WT-CB
LMGRG-IN/V1/SD-AR16-BG
LMGRG-IN/V1/SD-PS07-FPP-DB
LMGRG-IN/V1/SD-PS19-FSB-BH-DB
LMGRG-IN/V4/SD-PS07-FEG-WW-CB
2’-1
.75”
14”
LMGRG-IN/V1/SM-AF93-CB
LMGRG-IN/V1/SD-PS19-BG
LMGRG-IN/V1/SD-PF83-FPP-DB
LMGRG-IN/V1/SD-PS92-FPP-DB
LMGRG-IN/V4/SD-PS11-VC3-FPA-AS-CB
1’-5
.75”
2’-2
.5”
2’-8
”
2’-3
.25”
2’-4
.25”
2’-7
.75”
2’-1
0”
2’-0
”
2’-1
.5”
16” 16.25” 16.25” 16.5”
14.25”16.5”15.5” 16”16”
Winchester Style LuminaireCatalog No.: LMWNC
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 4
S p e c i f i c a t i o n
Description
The Winchester style luminaire shall consist of a cast orative casing, a medium base socket and globe. globes and decorative elements as well as optical systavailable vary. Details on these options are detailed onnext page.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 4.25”.
Material
The luminaire casing is of one piece heavy wall cast minum per A.S.T.M. B26-95 Alloy SR356. Other maals are available, gray iron per A.S.T.M. A48, or duiron per A.S.T.M. A536. The luminaire is supplied weither a porcelain medium or mogul base socket. hardware is stainless steel. All components are UL lis
Light Source
Luminaires are UL listed for wet location. See the lowing page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is aclose nipple. Consult factory for other tenon sizes.
1’-5
.5”
4.25
”
5.75” Dia.
Casing accepts a 2” close nipple(Consult factory for other tenon sizesavailable)
8.5” Dia.
1’-2”
Material Product Style-_____ ILMWNC Cast Iron Luminaire Winchester _____ DLMWNC Cast Ductile Iron Luminaire Winchester _____ ALMWNC Cast Aluminum Luminaire Winchester
Source___ IN (Incandescent) ___ CP (Compact Fluorescent) ___ XX (Modifier)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)
___ 050/ (50 Watts) ___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)
___ 150/ (150 Watts) ___ 175/ (175 Watts) ___ 200/ (200 Watts)___ 250/ (250 Watts)
Ballast Type___ N/A
Voltage____ V1/ 120 Volts
Sockets____ SD- Medium Base ____ SF- Fluorescent ____ SB- Bi Pin
Globes___ PR14- 14” Dia. Poly. Clear Ball Globe ___ PW14- 14” Dia. Poly. White Ball Globe
___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe
___ PR18- 18” Dia. Poly. Clear Ball Globe ___ PW18- 18” Dia. Poly. White Ball Globe
___ AR14- 14” Dia. Acrylic Clear Ball Globe ___ AW14- 14” Dia. Acrylic White Ball Globe
___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe
___ AR18- 18” Dia. Acrylic Clear Ball Globe ___ AW18- 18” Dia. Acrylic White Ball Globe
Refractor / Reflectors
___ HSF- House side shield Flat ___ HSC- House side shield Curved
___ L6 3- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials
___ FPP- 110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications
___ HS- Heat shield ___ WT-GL30 Spun top
___ AS- Armory Square Spun top ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 48
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Refractors / Reflectors - CoatingsI LM WNC - IN / N/A V1 / SD - PW14 - HSF - CB
OrderingGuide Iron Luminaire Winchester- Inc / N/A 120 Volts /Medium base -14” Dia. Poly. white Ball Globe - House side sheild - Classic Black Finish
LMWNC-IN/V1/SD-PW16-FG3-CB
LMWNC-IN/V1/SD-AR14-BG
1’-5
.5”
14”
LMWNC-IN/V1/SD-AR18-BG
16” 18”
2’-6
”
1’-9
.5”
Edmonton Style LuminaireCatalog No.: LMEDT
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 4
S p e c i f i c a t i o n
Description
The Edmonton style luminaire shall consist of a cast orative casing, a medium base socket and globe. globes and decorative elements as well as optical systavailable vary. Details on these options are detailed onnext page.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 1.75”.
Material
The luminaire casing is of one piece heavy wall cast minum per A.S.T.M. B26-95 Alloy SR356. The luminis supplied with a porcelain medium base socket. hardware is stainless steel. All components are UL lis
Light Source
Luminaires are UL listed for wet location. See the lowing page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is 2.8Dia. x 2.5” High. Consult factory for other tenon size
1’-2
.5”
1.75
”
3.625” Dia.
Casing accepts a 2.875” Dia. x2.5” High Tenon (Consult factoryfor other tenon sizes available)
7.875” Dia.
1’-2”
Material Product Style-_____ ALMEDT Cast Aluminum Luminaire Edmonton
Source___ IN (Incandescent) ___ CP (Compact Fluorescent) ___ XX (Modifier)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)
___ 050/ (50 Watts) ___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)
___ 150/ (150 Watts) ___ 175/ (175 Watts) ___ 200/ (200 Watts)___ 250/ (250 Watts)
Ballast Type___ N/A
Voltage____ V1/ 120 Volts
Sockets____ SD- Medium Base ____ SF- Fluorescent ____ SB- Bi Pin
Globes___ PR14- 14” Dia. Poly. Clear Ball Globe ___ PW14- 14” Dia. Poly. White Ball Globe
___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe
___ PR18- 18” Dia. Poly. Clear Ball Globe ___ PW18- 18” Dia. Poly. White Ball Globe
___ AR14- 14” Dia. Acrylic Clear Ball Globe ___ AW14- 14” Dia. Acrylic White Ball Globe
___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe
___ AR18- 18” Dia. Acrylic Clear Ball Globe ___ AW18- 18” Dia. Acrylic White Ball Globe
Refractor / Reflectors
___ HSF- House side shield Flat ___ HSC- House side shield Curved
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials
___ FPP- 110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications
___ WT-GL30 Spun top ___ WW- Washington Spun top
___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 50
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Refractors / Reflectors - CoatingsA LM EDT - IN150 / N/A V1 / SD - PW16 - HSF - CB
OrderingGuide Aluminum Luminaire Edmonton- 150 Watt Inc / N/A 120 Volts /Medium base -199 clear stippled poly. - House side sheild - Small Brass Finial- Classic Black Finish
LMEDT-IN/V1/SD-PW16-FG3-WT-CB
1’-2
.5”
14”
LMEDT-IN/V1/SD-PW16-CB
LMEDT-IN/V1/SD-PW14-CB
16” 16”
1’-4
.75”
2’-3
.25”
Essington Style LuminaireCatalog No.: LMESS
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 5
S p e c i f i c a t i o n
Description
The Essington style luminaire shall consist of a cast drative casing, a medium base socket and globe. globes and decorative elements as well as optical systavailable vary. Details on these options are detailed onnext page.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 4.875”.
Material
The luminaire casing is of one piece heavy wall cast minum per A.S.T.M. B26-95 Alloy SR356. The luminis supplied with a porcelain medium base socket. hardware is stainless steel. All components are UL lis
Light Source
Luminaires are UL listed for wet location. See the lowing page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is 3/4” pnipple High. Consult factory for other tenon sizes.
1’-6
”
4.87
5”
2” Dia.
Casing accepts a 3/4” pipe nipple(Consult factory for other tenon sizes avail-able)
7.875” Dia.
1’-2”
Material Product Style-_____ ALMESS Cast Aluminum Luminaire Essington
Source___ IN (Incandescent) ___ CP (Compact Fluorescent) ___ XX (Modifier)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)
___ 050/ (50 Watts) ___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)
___ 150/ (150 Watts) ___ 175/ (175 Watts) ___ 200/ (200 Watts)___ 250/ (250 Watts)
Ballast Type___ N/A
Voltage____ V1/ 120 Volts
Sockets____ SD- Medium Base ____ SF- Fluorescent ____ SB- Bi Pin
Globes___ PR14- 14” Dia. Poly. Clear Ball Globe ___ PW14- 14” Dia. Poly. White Ball Globe
___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe
___ PR18- 18” Dia. Poly. Clear Ball Globe ___ PW18- 18” Dia. Poly. White Ball Globe
___ AR14- 14” Dia. Acrylic Clear Ball Globe ___ AW14- 14” Dia. Acrylic White Ball Globe
___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe
___ AR18- 18” Dia. Acrylic Clear Ball Globe ___ AW18- 18” Dia. Acrylic White Ball Globe
Refractor / Reflectors
___ HSF- House side shield Flat ___ HSC- House side shield Curved
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials
___ FPP- 110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications
___ HS- Heat shield ___ WT-GL30 Spun top
___ WW- Washington Spun top ___ AS- Armory Square Spun top
___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 52
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Refractors / Reflectors - CoatingsA LM ESS - IN150 / N/A V1 / SD - PW16 - HSF - CB
OrderingGuide Aluminum Luminaire Essington- 150 Watt Inc / N/A 120 Volts /Medium base -16” Dia. Poly. White Ball Globe - House side sheild - Classic Black Finish
LMESS-IN/V1/SD-PW14-CB
1’-6
”14”
LMESS-IN/V1/SD-PW16-F3-WT-CB
LMESS-IN/V1/SD-PW16-FG3-WT-CB
16” 16”
1’-8
”
2’-6
.5”
Charleston Jr. Style LuminaireCatalog No.: LMCHS
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 5
S p e c i f i c a t i o n
Description
The Charleston Jr. style luminaire shall consist of a decorative casing, a medium base socket and globe. globes and decorative elements as well as optical systavailable vary. Details on these options are detailed onnext page.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 3”.
Material
The luminaire casing is of one piece heavy wall cast minum per A.S.T.M. B26-95 Alloy SR356. The luminis supplied with a porcelain medium base socket. hardware is stainless steel. All components are UL lis
Light Source
Luminaires are UL listed for wet location. See the lowing page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is 2.8Dia. x 1.5” High. Consult factory for other tenon size
1’-4
.75”
4”
3.625” Dia.
Casing accepts a 2.875” Dia. x 1.5”High Tenon (Consult factory for othertenon sizes available)
8.5” Dia.
1’-2”
Material Product Style-_____ ALMCHS Cast Aluminum Luminaire Charleston Jr.
Source___ IN (Incandescent) ___ CP (Compact Fluorescent) ___ XX (Modifier)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)
___ 050/ (50 Watts) ___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)
___ 150/ (150 Watts) ___ 175/ (175 Watts) ___ 200/ (200 Watts)___ 250/ (250 Watts)
Ballast Type___ N/A
Voltage____ V1/ 120 Volts
Sockets____ SD- Medium Base ____ SF- Fluorescent ____ SB- Bi Pin
Globes___ PR12- 12” Dia. Poly. Clear Ball Globe ___ PW12- 12” Dia. Poly. White Ball Globe
___ PR14- 14” Dia. Poly. Clear Ball Globe ___ PW14- 14” Dia. Poly. White Ball Globe
___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe
___ AR12- 12” Dia. Acrylic Clear Ball Globe ___ AW12- 12” Dia. Acrylic White Ball Globe
___ AR14- 14” Dia. Acrylic Clear Ball Globe ___ AW14- 14” Dia. Acrylic White Ball Globe
___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe
Refractor / Reflectors
___ HSF- House side shield Flat ___ HSC- House side shield Curved
Finials
___ FPP- 110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications
___ HS- Heat shield ___ WT-GL30 Spun top
___ BT-Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 54
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Refractors / Reflectors - CoatingsA LM CHS - IN150 / N/A V1 / SD - PR14 - HSF - CB
OrderingGuide Aluminum Luminaire Charleston Jr- 150 Watt Inc / N/A 120 Volts /Medium base -14” Dia. Poly. White Ball Globe - House side sheild - Classic Black Finish
LMCHS-IN/V1/SM-PW12-CB
1’3.
2.5”
12”
LMCHS-IN/V1/SD-PW14-CB
LMCHS-IN/V1/SD-PW16-DB
1’-4
.5”
14” 16”
1’-7
.25”
Corpus Christi Style LuminaireCatalog No.: LMCRP
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 5
S p e c i f i c a t i o n
Description
The Corpus Christi style luminaire shall consist of a decorative casing, a medium base socket and globe. globes and decorative elements as well as optical systavailable vary. Details on these options are detailed onnext page.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 4.5”.
Material
The luminaire casing is of one piece heavy wall cast minum per A.S.T.M. B26-95 Alloy SR356. Other maals are available, gray iron per A.S.T.M. A48, or duiron per A.S.T.M. A536. The luminaire is supplied wiporcelain medium base socket. All hardware is stainsteel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location. See the lowing page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is 7” x .6875” High. Consult factory for other tenon sizes.
1’-9
.75”
4.5”
8” Dia.
Casing accepts a 7” Dia. x .6875”High Tenon (Consult factory for othertenon sizes available)
8.75” Dia.
1’-6”
Material Product Style-_____ ILMCRP Cast Iron Luminaire Corpus Christi _____ DLMCRP Cast Ductile Iron Luminaire Corpus Christi _____ ALMCRP Cast Aluminum Luminaire Corpus Christi
Source___ IN (Incandescent) ___ CP (Compact Fluorescent) ___ XX (Modifier)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)
___ 050/ (50 Watts) ___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)
___ 150/ (150 Watts) ___ 175/ (175 Watts) ___ 200/ (200 Watts)___ 250/ (250 Watts)
Ballast Type___ N/A
Voltage____ V1/ 120 Volts
Sockets____ SD- Medium Base ____ SF- Fluorescent ____ SB- Bi Pin
Globes___ PS07-107 Clear Stippled polycarbonate
___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe
___ PR18- 18” Dia. Poly. Clear Ball Globe ___ PW18- 18” Dia. Poly. White Ball Globe
___ PR20- 20” Dia. Poly. Clear Ball Globe ___ PW20- 20” Dia. Poly. White Ball Globe
___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe
___ AR18- 18” Dia. Acrylic Clear Ball Globe ___ AW18- 18” Dia. Acrylic White Ball Globe
___ AR20- 20” Dia. Acrylic Clear Ball Globe ___ AW20- 20” Dia. Acrylic White Ball Globe
Refractor / Reflectors
___ HSF- House side shield Flat ___ HSC- House side shield Curved
Finials
___ FPP- 110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications
___ HS- Heat shield ___ WT-GL30 Spun top
___ WW- Washington Spun top ___ AS- Armory Square Spun top
___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 56
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Refractors / Reflectors - CoatingsI LM CRP - IN150 / N/A V1 / SD - PW18 - HSF - CB
OrderingGuide Iron Luminaire Corpus Christi- 150 Watt Inc / N/A 120 Volts /Medium base -18” Dia. Poly. White Ball Globe -House side sheild -Classic Black Finish
LMCRP-IN/V1/SM-PW16-CB
1’-7
.75”
16”
LMCRP-IN/V1/SD-PR16-FG3-WT-DB
LMCRP-IN/V1/SD-PW18-CB
1’-9
.75”
2’-6
”
16” 18”
Kennedy Bridge Style LuminaireCatalog No.: LMKNN
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 5
S p e c i f i c a t i o n
Description
The Kennedy Bridge style luminaire shall consist of a decorative casing, a medium base socket and globe. globes and decorative elements as well as optical systavailable vary. Details on these options are detailed onnext page.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 7.5”.
Material
The luminaire casing is of one piece heavy wall cast minum per A.S.T.M. B26-95 Alloy SR356. Other maals are available, gray iron per A.S.T.M. A48, or duiron per A.S.T.M. A536. The luminaire is supplied wiporcelain medium base socket. All hardware is stainsteel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location. See the lowing page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is 7” x .75” High. Consult factory for other tenon sizes.
1’-1
0.87
5”
7.5”
10” Dia.
Casing accepts a 7” Dia. x .75”High Tenon (Consult factory forother tenon sizes available)
8” Dia.
1’-4”
Material Product Style-_____ ILMKNN Cast Iron Luminaire Kennedy Bridge _____ DLMKNN Cast Ductile Iron Luminaire Kennedy Bridge _____ ALMKNN Cast Aluminum Luminaire Kennedy Bridge
Source___ IN (Incandescent) ___ CP (Compact Fluorescent) ___ XX (Modifier)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)
___ 050/ (50 Watts) ___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)
___ 150/ (150 Watts) ___ 175/ (175 Watts) ___ 200/ (200 Watts)___ 250/ (250 Watts)
Ballast Type___ N/A
Voltage____ V1/ 120 Volts
Sockets____ SD- Medium Base ____ SF- Fluorescent ____ SB- Bi Pin
Globes
___ PR12- 12” Dia. Poly. Clear Ball Globe ___ PW12- 12” Dia. Poly. White Ball Globe
___ PR14- 14” Dia. Poly. Clear Ball Globe ___ PW14- 14” Dia. Poly. White Ball Globe
___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe
___ PR18- 18” Dia. Poly. Clear Ball Globe ___ PW18- 18” Dia. Poly. White Ball Globe
___ AR12- 12” Dia. Acrylic Clear Ball Globe ___ AW12- 12” Dia. Acrylic White Ball Globe
___ AR14- 14” Dia. Acrylic Clear Ball Globe ___ AW14- 14” Dia. Acrylic White Ball Globe
___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe
___ AR18- 18” Dia. Acrylic Clear Ball Globe ___ AW18- 18” Dia. Acrylic White Ball Globe
Refractor / Reflectors
___ HSF- House side shield Flat ___ HSC- House side shield Curved
___ L6 3- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
Finials
___ FPP- 110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications
___ HS- Heat shield ___ WT-GL30 Spun top
___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 58
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Refractors / Reflectors - CoatingsI LM KNN - IN150 / N/A V1 / SD - PW16 - HSF - CB
OrderingGuide Iron Luminaire Kennedy Bridge- 150 Watt Inc / N/A 120 Volts /Medium base -16” Dia. Poly. White Ball Globe. - House side sheild - Classic Black Finish
LMKNN-IN/V1/SD-W16-F3-WT-CB
1’-6
.5”
12”
LMKNN-IN/V1/SD-W16-F3-WT-CB
LMKNN-IN/V1/SD-W16-F3-WT-CB
LMKNN-IN/V1/SD-W16-FG3-WT-CB
16” 18” 16”
1’-1
1”
2’-9
.5”
2’-1
”
San Antonio Jr. Style LuminaireCatalog No.: LMSNS
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 5
S p e c i f i c a t i o n
Description
The San Antonio Jr. style luminaire shall consist of a decorative casing, a medium base socket and globe. globes and decorative elements as well as optical systavailable vary. Details on these options are detailed onnext page.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 4”.
Material
The luminaire casing is of one piece heavy wall cast minum per A.S.T.M. B26-95 Alloy SR356. Other maals are available, gray iron per A.S.T.M. A48, or duiron per A.S.T.M. A536. The luminaire is supplied wiporcelain medium base socket. All hardware is stainsteel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location. See the lowing page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is 3.5” x 2” High. Consult factory for other tenon sizes.
1’-3
.5”
4”
4” Dia.
Casing accepts a 3.5” Dia. x 2”High Tenon (Consult factory for othertenon sizes available)
9.25” Dia.
1’-0”
Material Product Style-_____ ILMSNS Cast Iron Luminaire San Antonio Jr. _____ DLMSNS Cast Ductile Iron Luminaire San Antonio Jr. _____ ALMSNS Cast Aluminum Luminaire San Antonio Jr.
Source___ IN (Incandescent) ___ CP (Compact Fluorescent) ___ XX (Modifier)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)
___ 050/ (50 Watts) ___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)
___ 150/ (150 Watts) ___ 175/ (175 Watts) ___ 200/ (200 Watts)___ 250/ (250 Watts)
Ballast Type___ N/A
Voltage____ V1/ 120 Volts
Sockets____ SD- Medium Base ____ SF- Fluorescent ____ SB- Bi Pin
Globes___ PR12- 12” Dia. Poly. Clear Ball Globe ___ PW12- 12” Dia. Poly. White Ball Globe
___ PR14- 14” Dia. Poly. Clear Ball Globe ___ PW14- 14” Dia. Poly. White Ball Globe
___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe
___ AR12- 12” Dia. Acrylic Clear Ball Globe ___ AW12- 12” Dia. Acrylic White Ball Globe
___ AR14- 14” Dia. Acrylic Clear Ball Globe ___ AW14- 14” Dia. Acrylic White Ball Globe
___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe
Refractor / Reflectors
___ HSF- House side shield Flat ___ HSC- House side shield Curved
Finials
___ FPP- 110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications
___ HS- Heat shield ___ WT-GL30 Spun top
___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 60
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Refractors / Reflectors - CoatingsI LM SNS - IN150 / N/A V1 / SD - PW12 - HSF - CB
OrderingGuide Iron Luminaire San Antonio Jr.- 150 Watt Inc / N/A 120 Volts/Medium base -12” Dia. Poly. White Ball Globe -House side sheild -Small Brass Finial -Classic Black Finish
LMSNS-IN/V1/SD-W16-F3-WT-CB
1’-3
.5”
12”
LMSNS-IN/V1/SD-W16-F3-WT-CB
LMSNS-IN/V1/SD-W16-FG3-WT-CB
14” 16”
1’-5
.75”
2’-4
”
San Antonio Sr. Style LuminaireCatalog No.: LMSNN
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 6
S p e c i f i c a t i o n
Description
The San Antonio Sr. style luminaire shall consist of a decorative casing, a medium base socket and globe. globes and decorative elements as well as optical systavailable vary. Details on these options are detailed onnext page.
Dimensions
The luminaire’s overall dimensions are detailed onnext page. The height varies depending on globe optional finial or metal hood choice. The height of ing itself, less globe is 8.25”.
Material
The luminaire casing is of one piece heavy wall cast minum per A.S.T.M. B26-95 Alloy SR356. Other maals are available, gray iron per A.S.T.M. A48, or duiron per A.S.T.M. A536. The luminaire is supplied wiporcelain medium base socket. All hardware is stainsteel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location. See the lowing page for the most common.
Installation
The luminaires are designed to mount over a tenon andsecured to the tenon using several stainless steelscrews. Standard tenon size for this luminaire is 3.5” x 3” High. Consult factory for other tenon sizes.
1’-1
1.75
”
8.25
”
4” Dia.
Casing accepts a 3.5” Dia. x 3”High Tenon (Consult factory for othertenon sizes available)
9.25” Dia.
1’-4”
Material Product Style-_____ ILMSNN Cast Iron Luminaire San Antonio Sr. _____ DLMSNN Cast Ductile Iron Luminaire San Antonio Sr. _____ ALMSNN Cast Aluminum Luminaire San Antonio Sr.
Source___ IN (Incandescent) ___ CP (Compact Fluorescent) ___ XX (Modifier)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts) ___ 042/ (42 Watts)
___ 050/ (50 Watts) ___ 070/ (70 Watts) ___ 075/ (75 Watts) ___ 100/ (100 Watts)
___ 150/ (150 Watts) ___ 175/ (175 Watts) ___ 200/ (200 Watts)___ 250/ (250 Watts)
Ballast Type___ N/A
Voltage____ V1/ 120 Volts
Sockets____ SD- Medium Base ____ SF- Fluorescent ____ SB- Bi Pin
Globes___ PR14- 14 Dia. Poly. Clear Ball Globe ___ PW14- 14” Dia. Poly. White Ball Globe
___ PR16- 16” Dia. Poly. Clear Ball Globe ___ PW16- 16” Dia. Poly. White Ball Globe
___ PR18- 18” Dia. Poly. Clear Ball Globe ___ PW18- 18” Dia. Poly. White Ball Globe
___ AR14- 14” Dia. Acrylic Clear Ball Globe ___ AW14- 14” Dia. Acrylic White Ball Globe
___ AR16- 16” Dia. Acrylic Clear Ball Globe ___ AW16- 16” Dia. Acrylic White Ball Globe
___ AR18- 18” Dia. Acrylic Clear Ball Globe ___ AW18- 18” Dia. Acrylic White Ball Globe
Refractor / Reflectors
___ HSF- House side shield Flat ___ HSC- House side shield Curved
___ L6 3- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
Finials
___ FPP-110 Polycarbonate Finial ___ FPA- 110 Cast Aluminum Finial
___ FPB- 110 Cast Brass Finial ___ FSB- Small Brass Finial
___ FEG- Eagle Finial ___ FG3- GL30 Finial
Modifications
___ HS- Heat shield ___ WT-GL30 Spun top
___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ GI Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LM 62
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Refractors / Reflectors - CoatingsI LM SNN - IN150 / N/A V1 / SD - PW16 - HSF - CB
OrderingGuide Iron Luminaire San Antonio Sr.- 150 Watt Inc / N/A/ 120 Volts /Medium base -16” Dia. Poly. White Ball Globe - House side sheild - Classic Black Finish
LMSNN-IN/V1/SD-PW16-CB
1’-9
.75”
14”
LMSNN-IN/V1/SD-PW16-CB
LMSNN-IN/V1/SD-PW16-FG3-WT-CB
16” 16”
1’-1
1.75
”
2’-1
0.25
”