3 2 GB Drawer Slides 200689.161.158.215/_tco.com.pl_old/katalogi/meplaalfit/... · 2007. 10....
18
Drawer Slides 3.2 Single and full extension drawer runners with excellent running conditions Drawer Slides
Transcript of 3 2 GB Drawer Slides 200689.161.158.215/_tco.com.pl_old/katalogi/meplaalfit/... · 2007. 10....
Draw
er S
lides
3.2Single and full extension drawer runners withexcellent running conditions
Drawer Slides
Drawer slides offering proven quality and maximum use of drawer space.
Mepla-Alfit's drawer slides are known for
their ultra-silent operation, minimum sag-
ging, excellent side stability and a bottom
corner clearance.
Mepla-Alfit offers a wide variety of drawer
slides for traditional furniture applications.
Single and full extension drawer slides
available for different load capacities with
excellent technical details guarantee the
highest quality standards.
The traditional standard program for traditional and
institutional furniture.
Drawer Slides
System Information
3.2.2
• Single and full extension drawer slides for carrying capacities of 30-100 kg
• For lengths of 250 - 800 mm
• Bottom mounting
• Parallel self-closing, minimum gap
• Minimum deflection due to precision axle bearing
• Bottom corner clearance for efficient use of drawer bottom
A wide variety of solutions is the key.
Standard drawer slides for a wide variety of
furniture applications.
Draw
er S
lides
3.2.3
50 kg
Carryingcapacity
• Bottom mounting
• With nylon rollers
Single extensionslide, 30 kg
• Bottom mounting
• With nylon rollers
Single extensionslide, 35 kg
• Bottom mounting
• With nylon rollers
Full extensionslide, 50 kg
30 kg
35 kg
3.2.6
3.2.8
3.2.10
Page
Drawer slides
Summary
3.2.4
30 kg
Carryingcapacity
• Bottom mounting
• With nylon rollers
Single extensionslide with tiltbracket, 30 kg
100 kg
• Bottom mounting
• With steel ball bearings
• Galvanized
Heavy load singleextension slide,100 kg
3.2.12
3.2.14
Page
Draw
er sl
ides
3.2.5
Drawer Slides
Single extension, 30 kg
Single extension slide with nylonrollers, 30 kg, installation width 12.5 mm, bottom mounting
• Parallel closing• Secure closing, minimum gap values
• Bottom corner clearance• Chamfering of drawer bottom eleminated
• Clearance of screw heads in cabinet slide• Secure roller movement
• Double stop• Secure stop in open state possible
300 1700.300.2350 1700.350.2400 1700.400.2450 1700.450.2500 1700.500.2550 1700.550.2
Ref. No.white
RAL 9010
Length in mm
20 pairindividually
packed
PU
Ref. No.brown
RAL 8014
Length in mm
PU
Ref. No.cream
RAL 9001
Length in mm
PU
Ref. No.white
RAL 9010
Length in mm
PU
Ref. No.cream
RAL 9001
Length in mm
PU
Black and industrial packing on request
PU = Packing Unit
3.2.6
250 1700.250.11300 1700.300.11350 1700.350.11400 1700.400.11450 1700.450.11500 1700.500.11550 1700.550.11
20 pairindividually
packed
250 1702.250.11300 1702.300.11350 1702.350.11400 1702.400.11450 1702.450.11500 1702.500.11550 1702.550.11
25 pairloose
300 1700.300.3350 1700.350.3400 1700.400.3450 1700.450.3500 1700.500.3550 1700.550.3
20 pairindividually
packed
250 1702.250.2300 1702.350.2350 1702.350.2400 1702.400.2450 1702.450.2500 1702.500.2550 1702.550.2
25 pairloose
191Special Euro screwØ 6,3 x 10,5 mm
Ref. No.PU: 1000 pcs.
Screws / Screw measurements
7 mm
192Special Euro screwØ 6,3 x 14,0 mm
7 mm
198Wood screwØ 3,5 x 15 mm
7 mm
129
32 37
35 2
14
For Ø 3.5
Wood screw 198
and Euro screws 191/192
Carcass edge
Top4
min
.9m
in.1
5
12.5+2
Inside cabinet width (LW)
Drawer width = LW -25
33
11
6.5
12.5
Bottom
Mounting positions for cabinet profile
All measurements in millimeters.
Korpus-Vorderkante
250
64
64
128 128 372
32
96
300
350
400
450
500
550
128 96
250300350400450
90909090103
7373737386
Extension loss2
Length Extension loss1
500550
103118
86101
Extension loss 1:when slide is extended but unlocked
Extension loss 2:when slide is fully extended and locked
Extension loss
Mounting positions
Mounting positions for front cabinet profile
Technical InformationPage 3.2.18
Draw
er S
lides
3.2.7
Front edge of cabinet
191Special Euro screwØ 6,3 x 10,5 mm
Ref. No.PU: 1000 pcs.
Screws / Screw measurements
7 mm
192Special Euro screwØ 6,3 x 14,0 mm
7 mm
198Wood screwØ 3,5 x 15 mm
7 mm
Drawer Slides
Single extension, 35 kg
Single extension slide with nylonrollers, 35 kg, installation width 12.5 mm, bottom mounting
• Parallel closing• Secure closing, minimum gap values
• Bottom corner clearance• Chamfering of drawer bottom eleminated
• Clearance of screw heads in cabinet slide• Secure roller movement
• Double stop• Secure stop in open state possible
PU = Packing Unit
Ref. No.white
RAL 9010
Length in mm
Ref. No.white
RAL 9010
PU Ref. No.cream
RAL 9001
Length in mm
Length in mm
PU PU
Industrial packing on request
3.2.8
600 1800.600.2650 1800.650.2700 1800.700.2750 1800.750.2800 1800.800.2
20 pairindividually
packed
600 1802.600.2 25 pairloose
600 1800.600.11650 1800.650.11700 1800.700.11750 1800.750.11800 1800.800.11
20 pairindividually
packed
129
32 37
35 2
14
For Ø 3.5
Wood screw 198
and Euro screws 191/192
Carcass edge
Top4
min
.9m
in.1
5
12.5+2
Inside cabinet width (LW)
Drawer width = LW -25
33
11
6.5
12.5
Bottom
Extension loss 1:when slide is extended but unlocked
Extension loss 2:when slide is fully extended and locked
Mounting positions for cabinet profile
All measurements in millimeters.
Korpus-Vorderkante
128
224
128 256 224 128 372
128
600
650
700
750
800
600650700750800
118128138153153
101111121136136
Extension loss2
Length Extension loss1
Mounting positions
Mounting positions for front cabinet profile
Technical InformationPage 3.2.18
Draw
er S
lides
3.2.9
Front edge of cabinet
Extension loss
Ref. No.white
RAL 9010
Length in mm
PU
Ref. No.brown
RAL 8014
Length in mm
PU
Ref. No.cream
RAL 9001
Length in mm
PU
Black and industrial packing on request
Drawer Slides
Full extension, 50 kg
Full extension slide, with nylon rollers, 50 kg, installation width 12.5 mm, bottom mounting
• 30 mm over-extension• Easy access
• Central rail can be adjusted with turning bolt
• Secure parallel closing
• Removal protection• Secure connection of drawer to cabinet
• Bottom corner clearance• Chamfering of drawer bottom eleminated
PU = Packing Unit
3.2.10
250 5300.250.2300 5300.300.2350 5300.350.2400 5300.400.2450 5300.450.2500 5300.500.2550 5300.550.2600 5300.600.2650 5300.650.2700 5300.700.2750 5300.750.2800 5300.800.2 800 5300.800.11
10 pairindividually
packed
250 5300.250.11300 5300.300.11350 5300.350.11400 5300.400.11450 5300.450.11500 5300.500.11550 5300.550.11600 5300.600.11650 5300.650.11700 5300.700.11750 5300.750.11
10 pairindividually
packed
250 5300.250.3300 5300.300.3350 5300.350.3400 5300.400.3450 5300.450.3500 5300.500.3550 5300.550.3600 5300.600.3
10 pairindividually
packed
191Special Euro screwØ 6.3 x 10.5 mm
Ref. No.PU: 1000 pcs.
Screws / Screw measurement
7 mm
192Special Euro screwØ 6.3 x 14.0 mm
7 mm
198Wood screwØ 3.5 x 15 mm
7 mm
9 6
32 37
Carcass edge
35 2
6
For Ø 3.5
wood screws and
Euro screws 191/192
Top12.5
+112.5
+1
60
543
Inside cabinet width (LW)
Drawer width = LW -25
min
. 48
min
. 12
Bottom
6.5
30 mm
Over extension
Mounting positions for cabinet profile
All measurements in millimeters.
Korpus-Vorderkante
250
96
64
64
128
224
128 256 224 128 372
32
96 128
128
37
300
350
400
450
500
550
600
650
700
750
800
Your benefit: full slide access
Full slide access due to 30 mm over-extension.This avoids interference with other slide fronts or protruding tops.
Over-extension
Mounting positions
Mounting positions for front cabinet profile
Technical InformationPage 3.2.18
Draw
er S
lides
250300 - 350
1015
400 - 800 30
Length Over-extension
3.2.11
Front edge of cabinet
450 1754.450.2 500 1754.500.2 550 1754.550.2
25 pairloose
Drawer Slides
Single extension with tilt fitting
Single extension slide with tiltfitting, with nylon rollers, 30 kg,installation width 12.5 mm, bottommounting
• Front can be tilted• Access to trays from front
• Parallel closing• Secure closing
• Bottom corner clearance• Chamfering of drawer bottom eleminated
• Double stop• Secure stop in open state possible
PU = Packing Unit
1 2
3 4
3.2.12
191Special Euro screwØ 6.3 x 10.5 mm
Ref. No.PU: 1000 pcs.
Screws / Screw measurements
7 mm
192Special Euro screwØ 6.3 x 14.0 mm
7 mm
198Wood screwØ 3.5 x 15 mm
7 mm
Ref. No.white
RAL 9010
Length in mm
PU
Extension loss 1:when slide is extended but unlocked
Extension loss 2:when slide is fully extended and locked
Mounting positions for cabinet profile
All measurements in millimeters.
450550
128138
111121
550 153 136
Extension loss2
Length Extension loss1
Mounting positions
Extension loss
Technical InformationPage3.2.18
Draw
er S
lides
3.2.13
Mounting positions for front cabinet profile Front edge of cabinet
Drawer Slides
Ball bearing-single extension, 100 kg
Single extension slide with steel ball bearings, 100 kg,installation width 17 mm, bottommounting
• With self-closing function• Secure front positions in closed condition
• Double stop• Secure stop in open state possible
• Push-in stop• System stop for interior drawers
PU = Packing Unit
3.2.14
191Special Euro screwØ 6,3 x 10,5 mm
Ref. No.PU: 1000 pcs.
Screws / Screw measurements
7 mm
192Special Euro screwØ 6,3 x 14,0 mm
7 mm
Ref. No.galvanized
Length in mm
PU
400 4000.400.5450 4000.450.5500 4000.500.5550 4000.550.5600 4000.600.5700 4000.700.5 800 4000.800.5 900 4000.900.5 1000 4000.1000.5
10 pairindividually
packed
6 pairindividually
packed
32For Euro
screws 191/192
23
12.5
9
Top
min
. 9
17+0.5
17+0.5
Inside cabinet width (LW)
Drawer width = LW -35
8
min
. 20
Bottom
12.5
32
All measurements in millimeters.
400
450
500
550
600
700
800
900
1000
160 160 32
192 192 32
128160 160 32
160160 160 32
192 160 192 32
192219,5 224 32
224255,5 256 32
259,5 288 288 32
224 352359,5 32
Mounting positions for cabinet profile
Mounting positions
Mounting positions for front cabinet profile
Extension loss 1:when slide is extended but unlocked
Extension loss 2:when slide is fully extended and locked
400450500550600
105105105105115
90909090100
Extension loss2
Length Extension loss1
700 135 120800 135 120 900 150 135 1000 150 135
Extension loss
Technical InformationPage 3.2.18
Draw
er S
lides
3.2.15
Minimum gap in mm
Extension
in mm
Minimum gap
Over-extension at full extension runners
Your benefit: Full drawer access due
to 30 mm over extension. This avoids
interference with other drawer
fronts or protruding counter top.
Fixing of cabinet members:The specified data is based on reference particle board according to DIN 68858, MDF and hardwood.
If other types of woods and qualities are used, please consider the proper screws type as well as numbers of screws used.
Minimum gap for 19 mm front = 0.5 mm
Carefully engineered
self-closing range allows
minimum gaps
between drawer fronts
Extension loss at single extension runners
System compatible
Interchangeable on existing drilling pat-
terns with single extension runners.
3232
32
32 mmSystem(verticle)
Systemboring
Drawer Slides
Technical Information
3.2.16
EL 1
EL 2
Single extension
runners show two
kinds of extension
losses (EL)
EL 1: EL 1: extension loss
when drawer is extended
but unlocked
EL 2: extension loss when
drawer is fully extended
and locked
Drawer Slides Summary Page 3.2.4
Insertion, securing, and removal of drawer
Insertion of drawerExtend intermediate profiles fully
to the open stop. Insert the drawer
horizontally.
MalfunctionMalfunction is automatically
corrected by fully extending the drawer.
Mounting of safety lockOne pair of black safety locks is supplied
with each set of full extension runners.
Separate safety locks and insert into
openings as indicated into left and right
intermediate profiles - pay attention to
direction of arrow! (A + B)
Removal of drawerWhen reaching open position of drawer,
remove safety lock by lifting lock in
the center (C) and take out drawer.
For insertion and removal of intermediate
profile, “twist-lock” has to be in
mounting position.
Safety lockThe safety lock prevents accidental remo-
val of drawer. It is a major safety aspect.
Twist-lock
Insertion of intermediate profile
• Guaranteed self-closing
• Carrying capacity 50 kg
• Convenient drawer insertion
and removal
Check mounting positionsCorrect position for drawer insertion
Correctposition
Wrong position
Wrong positionInsertion of drawer is not possible.
Intermediate profiles
to be inclined for
insertion into cabinet
profiles at rear
position.
Twist-lock trigger
Full extension 5300 runner with Twist-lock control for guaranteed self-closing
Draw
er S
lides
3.2.17
