2nd codition of equilibrium
-
Upload
nestor-enriquez -
Category
Documents
-
view
11.174 -
download
1
Transcript of 2nd codition of equilibrium
![Page 1: 2nd codition of equilibrium](https://reader036.fdocuments.in/reader036/viewer/2022062319/5578efe9d8b42a5c5c8b506a/html5/thumbnails/1.jpg)
ROTATIONAL EQUILIBRIUM
THESECOND
CONDITION OFEQUILIBRIUM
![Page 2: 2nd codition of equilibrium](https://reader036.fdocuments.in/reader036/viewer/2022062319/5578efe9d8b42a5c5c8b506a/html5/thumbnails/2.jpg)
IntroductionWhen a body is in equilibrium, it is either at rest or in uniform motion. According to Newton’s first law, only the application of a resultant force can change this condition. We have seen that, if all forces acting on such body intersect at a single point and their vector sum is zero, the system must be in equilibrium. When a body is acted on by forces that do not have a common line of action, it may be in translational equilibrium but not in rotational equilibrium. It means that it may not move to the right or left or up or down, but it may still rotate
![Page 3: 2nd codition of equilibrium](https://reader036.fdocuments.in/reader036/viewer/2022062319/5578efe9d8b42a5c5c8b506a/html5/thumbnails/3.jpg)
IntroductionConsider the forces exerted on a cross wrench, two equal opposing forces F are applied to the right and to the left. The first condition of equilibrium tells us that the vertical and horizontal forces are balanced. Hence, the system is said to be in equilibrium. If the same forces are applied however, the wrench has the tendency to rotate. This is true even though the vector sum is still zero. Clearly, we need a second condition for equilibrium to cover rotational motion.
![Page 4: 2nd codition of equilibrium](https://reader036.fdocuments.in/reader036/viewer/2022062319/5578efe9d8b42a5c5c8b506a/html5/thumbnails/4.jpg)
DIAGRAM OF CROSS WRENCH
FF
AXIS OF ROTATION
![Page 5: 2nd codition of equilibrium](https://reader036.fdocuments.in/reader036/viewer/2022062319/5578efe9d8b42a5c5c8b506a/html5/thumbnails/5.jpg)
Definition of Terms
A line of action of a force is an imaginary line extended indefinitely along a vector in both directions.
Axis of rotation is an imaginary line passing through a point perpendicular to the direction of rotation.
![Page 6: 2nd codition of equilibrium](https://reader036.fdocuments.in/reader036/viewer/2022062319/5578efe9d8b42a5c5c8b506a/html5/thumbnails/6.jpg)
MOMENT ARM
The perpendicular distance from the axis of rotation to the line of action of force is called moment arm of the force. It is the moment arm that determines the effectiveness of a given force in causing rotational motion. If we exert a force at increasing distances from the center of a wheel, it becomes easier to rotate the wheel about its center.
![Page 7: 2nd codition of equilibrium](https://reader036.fdocuments.in/reader036/viewer/2022062319/5578efe9d8b42a5c5c8b506a/html5/thumbnails/7.jpg)
The moment arm of a force is the perpendicular
distance from the line of action of the force to the axis of
rotation.
![Page 8: 2nd codition of equilibrium](https://reader036.fdocuments.in/reader036/viewer/2022062319/5578efe9d8b42a5c5c8b506a/html5/thumbnails/8.jpg)
THE MOMENT ARM
A B C
F F F
![Page 9: 2nd codition of equilibrium](https://reader036.fdocuments.in/reader036/viewer/2022062319/5578efe9d8b42a5c5c8b506a/html5/thumbnails/9.jpg)
EXAMPLES OF MOMENT ARMSand Sign Convention
NEGATIVE TORQUE
F
r
![Page 10: 2nd codition of equilibrium](https://reader036.fdocuments.in/reader036/viewer/2022062319/5578efe9d8b42a5c5c8b506a/html5/thumbnails/10.jpg)
EXAMPLES OF MOMENT ARMS and Sign Convention
POSITIVE TORQUE
F
r
![Page 11: 2nd codition of equilibrium](https://reader036.fdocuments.in/reader036/viewer/2022062319/5578efe9d8b42a5c5c8b506a/html5/thumbnails/11.jpg)
EXAMPLES OF MOMENT ARMSand Sign Convention
POSITIVE TORQUE
F r
![Page 12: 2nd codition of equilibrium](https://reader036.fdocuments.in/reader036/viewer/2022062319/5578efe9d8b42a5c5c8b506a/html5/thumbnails/12.jpg)
EXAMPLES OF MOMENT ARMS and Sign Convention
POSITIVE TORQUE
F
r
![Page 13: 2nd codition of equilibrium](https://reader036.fdocuments.in/reader036/viewer/2022062319/5578efe9d8b42a5c5c8b506a/html5/thumbnails/13.jpg)
TORQUE
The tendency to produce a change in rotational motion. It is also called moment of force. Rotational motion is affected by both the magnitude of a force F and its moment arm r.
![Page 14: 2nd codition of equilibrium](https://reader036.fdocuments.in/reader036/viewer/2022062319/5578efe9d8b42a5c5c8b506a/html5/thumbnails/14.jpg)
TORQUE
We will define torque τ as the product of a magnitude of a force F and its moment arm r.
Torque = force x moment arm
τ = Fr
![Page 15: 2nd codition of equilibrium](https://reader036.fdocuments.in/reader036/viewer/2022062319/5578efe9d8b42a5c5c8b506a/html5/thumbnails/15.jpg)
Remember:
That r is measured perpendicular to the line of action of the force F.
That the units of torque are the units of force times distance, e.g. newton-meter [N-m] and pound-feet [lb-ft].
That if the force F tends to produce counterclockwise rotation about an axis, the torque will be positive. Clockwise torques will be considered negative.
![Page 16: 2nd codition of equilibrium](https://reader036.fdocuments.in/reader036/viewer/2022062319/5578efe9d8b42a5c5c8b506a/html5/thumbnails/16.jpg)
ILLUSTRATIVE EXAMPLE 1
A force of 250 N is exerted on a cable wrapped around a drum that has a diameter of 120 mm. What is the torque produced about the center of the drum?
![Page 17: 2nd codition of equilibrium](https://reader036.fdocuments.in/reader036/viewer/2022062319/5578efe9d8b42a5c5c8b506a/html5/thumbnails/17.jpg)
PLAN:Make a drawing and extend the line of action of the force. Determine the moment arm of the drum. The moment arm is therefore equal to the radius of the drum.
250 N
0.12
m
![Page 18: 2nd codition of equilibrium](https://reader036.fdocuments.in/reader036/viewer/2022062319/5578efe9d8b42a5c5c8b506a/html5/thumbnails/18.jpg)
SOLUTION:
Notice that the line of action of the 250-N force is perpendicular to the diameter of the drum. The moment arm is therefore equal to the radius of the drum.
D 120 mm
r = — = ———— or r = 60 mm = 0.06 m
2 2
![Page 19: 2nd codition of equilibrium](https://reader036.fdocuments.in/reader036/viewer/2022062319/5578efe9d8b42a5c5c8b506a/html5/thumbnails/19.jpg)
SOLUTION:
The magnitude of the torque if found by the equation:
T = Fr = (250N)(0.06m) = 15.0 N-mFinally, we determine that the sign of the torque
is negative because it tends to cause clockwise motion about the center of the drum. Thus, the answer is written as:
T = - 15.0 N-m
![Page 20: 2nd codition of equilibrium](https://reader036.fdocuments.in/reader036/viewer/2022062319/5578efe9d8b42a5c5c8b506a/html5/thumbnails/20.jpg)
ILLUSTRATIVE EXAMPLE 2
A mechanic exerts a 20-lb force at the end of a 10-in. wrench, as shown in the diagram. If this pull makes an angle of 60º with the handle, what is the torque produced on the nut?
PLANSketch the problem and
determine the moment arm, multiply it by the magnitude of the force, and affix the appropriate sign.
![Page 21: 2nd codition of equilibrium](https://reader036.fdocuments.in/reader036/viewer/2022062319/5578efe9d8b42a5c5c8b506a/html5/thumbnails/21.jpg)
SOLUTION:
First, we draw a neat sketch, extend the line of action of the 20-lb force and draw in the moment arm.
60º
20 lb
r
![Page 22: 2nd codition of equilibrium](https://reader036.fdocuments.in/reader036/viewer/2022062319/5578efe9d8b42a5c5c8b506a/html5/thumbnails/22.jpg)
From the figure, we obtain:
r
Sin 60º = ———
10 in.
R = 10 in. (sin 60º) = 8.66 in
T = Fr = (20 lb)(8.66 in.) = 173 lb-in.
Or 14.4 lb-ft.
![Page 23: 2nd codition of equilibrium](https://reader036.fdocuments.in/reader036/viewer/2022062319/5578efe9d8b42a5c5c8b506a/html5/thumbnails/23.jpg)
THE SECOND CONDITION OF EQUILIBRIUM
THE ALGEBRAIC SUM OF ALL TORQUES ABOUT ANY AXIS MUST
BE ZERO.
It tells us that the clockwise torques are exactly balanced by the counterclockwise torques
Στ = 0
Στcw + Στccw =0
![Page 24: 2nd codition of equilibrium](https://reader036.fdocuments.in/reader036/viewer/2022062319/5578efe9d8b42a5c5c8b506a/html5/thumbnails/24.jpg)
Second Condition of Equilibrium
Since the rotation is not changing, we may choose whatever point we wish as an axis of rotation. As long as the moment arms are measured to the same point for each force, the resultant torque will be zero. Choosing the axis of rotation at the point of application of an unknown force is a way to simplify problems. If a particular force has a zero moment arm, it does not contribute to torque, regardless of its magnitude.
![Page 25: 2nd codition of equilibrium](https://reader036.fdocuments.in/reader036/viewer/2022062319/5578efe9d8b42a5c5c8b506a/html5/thumbnails/25.jpg)
Illustrative Example 3
A 300-N girl and a 400-N boy stand on a platform supported by posts A and B as shown below. The platform itself weighs 200N. What are the forces exerted by the supports on the platform?
![Page 26: 2nd codition of equilibrium](https://reader036.fdocuments.in/reader036/viewer/2022062319/5578efe9d8b42a5c5c8b506a/html5/thumbnails/26.jpg)
Sketch of problem
300 N 200 N 400 N
6.00 m 4.00 m 4.00 m
12 m
A B
![Page 27: 2nd codition of equilibrium](https://reader036.fdocuments.in/reader036/viewer/2022062319/5578efe9d8b42a5c5c8b506a/html5/thumbnails/27.jpg)
Plan
Draw a free-body diagram to show the forces acting on the platform. Determine the CG of the platform and apply the 1st and 2nd conditions of equilibrium.
2m 6m 4m 4m
300 N 200 N 400 N
A B
![Page 28: 2nd codition of equilibrium](https://reader036.fdocuments.in/reader036/viewer/2022062319/5578efe9d8b42a5c5c8b506a/html5/thumbnails/28.jpg)
SolutionΣFx = 0: A + B – 300N =200 N – 400 N = 0
A + B = 900 NΣτ = 0: -A(12m) + 300N(10m)+ 200N(4m)-400N(4m) =0(-12m)A + 3000Nm + 800Nm - 1600Nm =02200Nm = (12m)AA = 183 NA+B =900NB = 900N-183NB=717N
![Page 29: 2nd codition of equilibrium](https://reader036.fdocuments.in/reader036/viewer/2022062319/5578efe9d8b42a5c5c8b506a/html5/thumbnails/29.jpg)
THANK YOU FOR LISTENING!.