2nd and 3rd life furniture

15
SeaboardBedding.Com

description

Excerpts taken from Houseofsmiths.com. A great web site for DIY repurposed furniture. Check them out for ideas and how to's before starting your next home furniture project.

Transcript of 2nd and 3rd life furniture

Page 1: 2nd and 3rd life furniture

SeaboardBedding.Com

Page 2: 2nd and 3rd life furniture

SeaboardBedding.Com

Mix lines with Hardware

Page 3: 2nd and 3rd life furniture

SeaboardBedding.Com

Page 4: 2nd and 3rd life furniture

SeaboardBedding.Com

Page 5: 2nd and 3rd life furniture

SeaboardBedding.Com

Page 6: 2nd and 3rd life furniture

SeaboardBedding.Com

$.47 cent a yard rope, a piece of this small square board ($1.97) to put inside the corners of our crates and a thin piece of plywood ($8.00) for the bottoms of the boxes.

Page 7: 2nd and 3rd life furniture

SeaboardBedding.Com

We didn't have to do much cutting, because the front of our crates were going to be the same size as the smaller pre-cut boards. So we just cut the small square piece for the corners at about 9.5 inches and started nailing away, with our finishing nails

There really was no science to this process, and remember, it DOES NOT have to be perfect. In fact, you don't want it to be!

Page 8: 2nd and 3rd life furniture

SeaboardBedding.Com

We didn't have to do much cutting, because the front of our crates were going to be the same size as the smaller pre-cut boards. So we just cut the small square piece for the corners at about 9.5 inches and started nailing away, with our finishing nails

There really was no science to this process, and remember, it DOES NOT have to be perfect. In fact, you don't want it to be!

Page 9: 2nd and 3rd life furniture

SeaboardBedding.Com

Next, we took our box, set it on top of a piece of plywood, drew a square around the shape and then cut it out to make a simple bottom that would be the perfect fit...

Page 10: 2nd and 3rd life furniture

SeaboardBedding.Com

As you can see, we didn't overlap the planks, because we wanted to give the box a little more character with that extra groove

Page 11: 2nd and 3rd life furniture

SeaboardBedding.Com

Next, I took a large drill bit and drilled four holes in the fronts of each crate for handles.I measured mine at about 3 inches and 8 inches in, from the side of the crate.

Page 12: 2nd and 3rd life furniture

SeaboardBedding.Com

Once I got going my staining process was simple and really, staining is probably the EASIEST thing to do ever! All I did was brush it on with my paintbrush and then after I was done with a section I used a dry cloth to wipe of any excess stain.

Page 13: 2nd and 3rd life furniture

SeaboardBedding.Com

Page 14: 2nd and 3rd life furniture

SeaboardBedding.Com

Page 15: 2nd and 3rd life furniture

SeaboardBedding.Com

For more nifty-thrifty ideas and how to’s

Go check out HouseOfSmiths.Com

An awesome website of inspiration and ideas for repurposing old furniture!

Credit where Credit is due