2G Parameter List ZTE

7/21/2019 2G Parameter List ZTE

1/13

TABLE Parameter

Max number of re-transmitting events times(MRetrans)

Number of slots to spread transmission(Txinteger)

Cell bar qualify(CellBarQualify)

Cell bar access(CellBarAccess)

Control channel maximum power level(MsTxPwrMaxCch)

Min received signal level to access(RxLevAccessMin)

IMSI attach/detach allowed(ImsIadAllowed)

Call reestablishment allowed(CallReestablish)

Directed retry indication switch(DrInd)

Uplink discontinuous transmission(DtxUplinkBcch)

Downlink discontinuous transmission allowed(DtxDwlink)

Preprocessing indication(Preprocess)

Fast average indication(FastAvg)

Allow FACCH call setup after emergency call

CBC support(SmsCbUsed)

Multi-band report indication(MulbandReport)

Early category class-mark sending control(ECSC)

HBTS proofread support(HBTSScanSupport)

RSSI threshold(RSSIThrd)

Proofread freqband type(GSM1900Support)

HBTS Arfcn Range Number

HBTS rang low

HBTS rang high

Uplink power level(HoUlLevWindow)

Averaging weight for uplink power level UTRAN

Downlink power level(HoDlLevWindow)

Averaging weight for downlink power level UTRAN

Uplink quality(HoUlQualWindow)

Averaging weight for uplink quality UTRAN

Downlink quality(HoDlQual)

Averaging window for downlink quality UTRAN

Distance(DistanceWindow)

Neighboring cell(NCellWindow)

Number of zero allowed in AV(ZeroAllowed)

Hoc pattern indication(HoPatternInd)

Parameter for PBGT between different layers

The threshold for starting PBGT handover(PbgtHoStartThs)Handover from macro to micro(MacroMicroStartThs)

Hysteresis timer when traffic handover(TrafficHysteresisTm,s)

The priority of the handover from Macro cell to Micro

cell(MacroMicroHoPrio)

Hoc control(HoControl)

Min interval between inter-cell handover(HoMinInterval,s)

Uplink receive level(HoUlLevThs)

Downlink receive level(HoDlLevThs)

Uplink receive quality(HoUlQualThs)

Downlink receive quality(HoDlQualThs)

Uplink receive level of intra-ho(IntraHoUlLevThs)

Downlink receive level of intra-ho(IntraHoDlLevThs)

Max time advance threshold between MS and BTS(DistanceThs)P value of uplink receive level UTRAN

N value of uplink receive level UTRAN

P value of downlink receive level UTRAN

N value of downlink receive level UTRAN

P value of uplink receive quality UTRAN

N value of uplink receive quality UTRAN

P value of downlink receive quality UTRAN

N Value of downlink receive quality UTRAN

P value of uplink receive level of intra-handover UTRAN

N value of uplink receive level of intra-handover UTRAN

P value of downlink receive level of intra-handover UTRAN

PLAN_CELL_ACCESS_TABLE

PLAN_CELL_FUNCTION_TABLE

LAN_CELL_HANDOVER_SAMPLING_TA


2/13

N value of downlink receive level of intra-handover UTRAN

P value of distance handover UTRAN

N value of distance handover UTRAN

Rapid handover(RapidHoThs)

N value of rapid handover UTRAN

Penalty time for handover failure(HoFailPenalTime)

Prior layer selecting parameter on signal lever/quality(LayerPriority)

Layer adapting to PBGT handover(PbgtHoLayer)

Good C/I(GoodCiThs)

P value of good C/I UTRAN

N value of good C/I UTRAN

Bad C/I(BadCiThs)

P value of bad C/I UTRAN

N value of bad C/I UTRAN

Difference of dynamic priority(DynPrioOffset)

PBGT difference(PbgtOffset)

Layer control value for handover on traffic(TrafficHoLayrCtl)

Frequency control value for handover on traffic(TrafficHoFreqCtl)

Threshold of traffic for handover(TrafficThs,%)

N value of pbgt handover UTRAN

P value of pbgt handover UTRAN

Traffic handover threshold(TrafficLevThs)

Level offset during penalty(PenaltyLevOffset)

Uplink interference quality offset(QOffsetUl)

Uplink interference level offset(SOffsetUl)

Downlink interference quality offset(QOffsetDl)

Downlink interference level offset(SOffsetDl)

Invalid intra-handover time(TMaxiHo)

Max count of invalid intra-handover(MaxiHo)

Max path loss threshold on force handover(MaxLossThs)

Max time advance threshold on force handover(MaxTAThs)

N value of force handover(HoForceN)

P value of force handover(HoForceP)

Dule band power offset(DuleBandOffset)

The maximum of path loss(PathLossMax)

The minimum of path loss(PathLossMin)The maximum of time advance(SubCellTAMax)

The minimum of time advance(SubCellTAMin)

N value of subcell handover(SubCellN)

P value of subcell handover(SubCellP)

Cell reselecting hysteresis level(ReselHysteresis,2db)

Additional reselection parameter indication(AdditionReselPI)

Cell reselection parameter indication(CellReselPI)

Cell reselection offset(ReselOffset,2db)

Temporary offset(TemporaryOffset,10db)

Penalty time(PenaltyTime,20s)

Common control channel configuration(CcchConf)

Number of blocks reserved for AGCH(BsAgBlkRes)

Number of multi-frames of the PCH(BsPaMframs)

Periodical location updating timer(T3212,360s)Protection period for access attempt(T3122,s)

Radio link failure criterion(ConFailCriterion)

Radio link timeout on MS side(MsRadioLkTmOut)

Radio link timeout on BSS side(BsRadioLkTmOut)

Receiving level threshold(RxLevThs)

Receiving quality threshold(RxQualThs)

Radio link failure checking period(RxLevQualprd)

Interference averaging period(InterfAvgPrd)

Interference band boundary0

Switch flag of cell TRX power off(StartTRXPowerOff)

Threshold for FR to HR(HRThs,%)

PLAN_CELL_HANDOVER_TABLE

PLAN_CELL_RESELECTION_TABLE


3/13


4/13

Threshold of HCS signal level(HCS_Thr)


GPRS cell reselection hysteresis(ReselHys,db)

C31 hysteresis(C31_Hyst)

Usage of cell reselection offset(C32_Qual)

Random access attempt permitted(RadAcRetry)

Interval of reselecting the same cell(T_Resel,s)

Routing reselection hysteresis(RaReselHys,db)

Temporary offset of cell reselection(TempOffset,db)

Penalty time of cell reselection(PenalTime,10s)

SI13 sending position(Si13Locate)

Route area color code(RaColor)

Extended measurement report order(MeaOrder)

Network control order(CtrlOrder)

NC hold time in non-drx mode(NcNoDrxPer,s)

Packet idle mode(NcRepPerI,s)

Packet transmission mode(NcRerPerT,s)

PSI status support(PsiStatInd)

Min number of idle CS channel(CsChansThs)

Extended measurement report order(ExMeaOrder)

Type of extended measurement report(ExtRepType)

Report period of extended measurement(ExtRepPer,s)

Send speed

Extended paging support(EpageMode)

Calculating period of load on PPCH(LoadPer,s)

Overload report period on PRACH(OvLoadPer,s)

Buffer threshold of paging message(%)

Link error counter(RLTimeout)

PRACH receive signal level threshold(PrachBusyT)

Average measuring bursts number on PRACH(MeaAvgSlot)

Additional reselect parameter indicator(AddResPI2)

Allow SOLSA MS to access(Exc_Acc)

LSA offset(LSA_Offset)

Priority threshold(Prio_Thr,db)

LSA ID(LSA_Id)

CCN mode support(CCNActive)

Cell support system message status flow(SIStatusInd)

Cell support extendable uplink TBF(Ext_UTBF)

Interval number of GPRS TBF downlink's RRBP(GPRSDlRrbpInterVal)

Interval number of EGPRS TBF downlink's RRBP(EGPRSDlRrbpInterVal)

Interval number of GPRS TBF uplink's ACK(GPRSUlAckInterVal)

Interval number of EGPRS TBF uplink's ACK(EGPRSUlAckInterVal)

Take preemptive transmit bit function(PreemptiveTrans)

Extended uplink dynamic allocation support(ExUpDynSupport)

UPU unit(UpuUnit)

Uplink measure report period(Ulmeasureperiod,ms)

Downlink delay time(DlDelaytime,ms)

Extend uplink TBF time(ExtUlTBFTime,ms)

Uplink delay time(UlDelayTime,ms)

PS preempt CS support(PSPrmpCSSupport)

Subscriber occupying other preference channel support(HybridOccuSupp)

PS subscriber moving out of other preference channel

support(AllowPsMove)

Congeneric service threshold for PS-moving(SfPreferBusyThs)

Uncongeneric service threshold for PS-moving(OpPreferBusyThs)

C/I(Sc)

ARP(Sa)

THP(St)

PS queuing support(PsQueueInd)

PLAN_GPRS_CELL_CONFIG_TABLE


5/13

Max PS queue count(PsMaxQueueInstNum)

PS preemption support(PsPreemptionInd)

CS subscriber moving support(AllowCsMove)

The size of test report's slip window(Wnd)

Allowed report number of the same cell in Slip window(AllowedRepNum)

CCCH SPLITPGCYCLE support(SpgcSuport)

Packet access priority threshold(PriAcThr)

Interval period of packet access attempt(S)

Max times of attempt(MaxRetrans)

3G NACC support(Support3GCCN)

PSI1 send period(Psi1RepPer)

Extended dynamic allocation supported(ExtDynAllocsupp)

Max resource for POC service(POCSrcThs,%)

DSP No.(DSP)

Info

Info1

Priority of handover(Hopriority)

MAX power level of MS(MsTxPwrMax)

MIN power level for handover access(RxLevMin)

MIN threshold of signal level for handover on PBGT(HoMarginPbgt)

MIN threshold of signal level for handover on power level(HoMarginRxLev)

MIN threshold of signal level for handover on quality(HoMarginRxQual)

MAX level difference of force handover(MaxForceHoDiff)

Handover force resource threshold(HoForceResThs)

Neighboring cell layer(NCellLayer)

CS adjacent cell report priority(RepPrioCS)

PS adjacent cell report priority(RepPrioPS)

Is related cell(IsRelatedCell)

Is handover forced neighbor cell(IsHoForceNcell)

CCN support(CCNSupport)

Cell type(CellType)

RAC

Target cell traffic threshold(TargetCellTrafficThs)

FIELD_IBTSHO_MACROMICROHOTHS

Counter of handover threshold from macro to micro (MacroMicroHon)

Assign queue enable(AssQueEnable)

Internal redirection enable(InDrEnable)

Outer redirection enable(OutDrEnable)

Assign preemption enable(AssPreEmpt)

BSC intra cell handover enable(HoIntraEnable)

BSC cell handover enable(HoInterEnable)

BSC outer handover enable(HoOutEnable)

SDCCH handover enable(ShoEnable)

TCH/F handover enable(TfHoEnable)

TCH/H handover enable(ThHoEnable)

Handover queue enable(HoQueEnable)

Handover preemption enable(HoPreEmpt)Handover check arithmetic choose(HoA)

Handover request response(HoAck)

Force FACCH(FacchOnly)

Continuum handover trigger(HoTrigger)

Handover reason tip(HoCauseInd)

Local cell position number(LAC)

Local cell identification(CI)

Outer cell target number(OutCellNum)

Outer cell position number(OutLAC)

Outer cell number(OutCI)

Outer RNC(OutRNC)

PLAN_HANDOVER_RESELECTION_CELL


6/13

Two phase access(TwoPhaseAccess)

Old BSS to new BSS information(OldToneWctrl)

Access control(AccessCtrl)

Resume set option(ResumeSetOpt)

Queuing Indicator in handover required message(HandOutQueInd)

Send cell prefer indication(SendCellPreferInd)

IPA AMR start mode(IpaAMRStartMode)

TDD cell handover enable(TdHoEnable)

Use system message method when MSC overload or link

block(MSCSysInfoFlc)

Start system message method(CPUSysInfoFlc)

Start limit of system message method(CPUSysInfoCTLCPU,%)

Start FUC flow control(CPUFucFlc)

Start limit of FUC flow control(CPUFucCtlCPU,%)

The maximum control level for MSC overload or link

block(MSCFlcMaxLevel)

CPU access flow control(CPUAccessFlc)

Handover BCCH(CanBCCHEx)

Dynamic configuration SDCCH(CanSDCCHDyn)

Scan SDCCH(ScanSDCCH,100ms)

Scan BCCH(ScanBCCH,100ms)

BCCH starting delay(BCCHDelay,100ms)

BCCH finishing delay(ReBCCHEx,100ms)

Delay of TRX forcible release(TrxRel,100ms)

Delay of TS forcible release(TsRel,100ms)

Delay protection(MaxDelay,100ms)

TCH->SDCCH limit(MinSDCCH)

SDCCH->TCH delay(TimeToTch)

The maximum cells' amount of simultaneously handover(MaxChangeProc)

B2 support AMR(V2TruSupportAMR)

CHR enable(ChrEnable)

NC2 support(NC2support)

MR server IP(MRSvrIP)

MR server port(MRSvrPort)

Voice Quality Weight

Resource Alarm ThresholdIBS shutdown limit(ByDownLimit,%)

IBS power up limit(ByUpLimit,%)

IBS power over limit(ByPowerOverLmt,%)

IBS power priority(ByPowerPriority)

IBS time bitmap(DwDownPowerBmp)

BCCH forbidden TS merger time bitmap(BCCHForbiddenBmp)

ABIS alarm delay time(AbisAlmDelayTime,s)

Local disk save performance measurement data(PMLocalSave)

Pingpong handover duration(PingPongDura,s)

Number of measurement reports for dropped

connections(LatestMeasureRptNum,num)

The method of intelligent TRX power off and Baseband frequency Hopping

TRX Exchange Parameters(Info)

Dropped Threshold(DropThs)CDT support(CDTOn)

CTS support(CTSOn)

CDT server IP(CdtSvrIP)

CDT server port(CdtSvrPort)

Report CDT flow threshold of inform(CdtFlowThres,kbps)

CdtOption(CdtOption)

Sending HO detect message to MSC during intra-BSC HO with IPA

(InBscHoSendHoDet)

Amr handover option(AmrHoOpt)

Buffered and transferred Max LLC frame number(MaxLLCFrameNum)

PLAN_IBSCMODULE


7/13

Send by SNDCP indicator(SNDCPSendInd)

TCP/IP performance enhance(TCPIPEnhance)

Range of tolerance of LLC out of order(OutOfOrderTolerance)

Send message to SGSN(GBMsgSndInd)

Threshold of quality in radio status(RadStaQuaThs)

Send packet TBF release to MS when BSS abnormal(PacketTBFRel)

Inter-cell handover processed within BSC allowed(InHoEnable)

BSC maximum reset number(BscMaxResetNum)

Send confusion message allowed(ConfusionMsg)

Automatic resource indication threshold(ResourceIndThs,%)

Resource adjust threshold(ResourceAdjustThs)

Load indication allowed(LoadInd)

Load indication valid time(LoadValidTime,10s)

Load indication period(LoadIndPrd,100ms)

BMP corresponded with flow control level(ChlReqRejBmp)

Send assignment failure allowed(ExDRSendAssFail)

BVC flow control threshold(CellFcThs,%)

MS flow control threshold(MsFcThs,%)

BVC flow control period(CellFcPer,10ms)

MS flow control period(MsFcPer,10ms)

Control TFO

NSVC peer to peer delay(Delay,ms)

Max times of NS block retry(NSBlkMax)

Max times of NS unblock retry(NSUnblkMax)

Max times of NS alive retry(NSAliveMax)

Max times of BVC block retry(BVCBlkMax)

Max times of BVC unblock retry(BVCUblkMax)

Max times of BVC reset retry(BVCRestMax)

Max times of suspend retry(SuspendMax)

Max times of resume retry(ResumeMax)

Max times of radio access capabilities update retry(UpdateMax)

Max times of PFC create retry(DownLoadBssPFCMax)

Max times of PFC modify retry(ModifyBssPFCMax)

Cn

Nn

Xn(%)

Max allowed number of continuous losses of uplink data blocks(N3101)

Times of packet uplink ACK/NACK retries(N3103)

Max allowed number of continuous losses of uplink RLC/MAC control

message(N3105)

Dynamic HR enable(DynaHREnable)

Threshold for TRX switched from FR to HR(HRThs,%)

User priority for EMLPP(PriThreshold)

Reserved channel first(RsvChanFirst)

Preferred speech version(PreferSpeechVer)

BVC flow control support(BVCFlowCtrl)

MS flow control support(MSFlowCtrl)

Flow control mode(FlowCtrlMode)

Parameter of flow control mode 1(FlowCtlMode1Para)Parameter of flow control mode 2(FlowCtlMode2Para)

BVC flow control R minimum value(BVCFlowCtrlRMin,100 bps)

MS flow control R minimum value(MSFlowCtrlRMin,100 bps)

Satellite transmission at GB interface indication(IsStatelliteGB)

Extended RLC send window allowed(IsWindowExpend)

PFC support(PFCSupport)

BSC net operation mode(NMO)

BSC support page coordination(PagCoordination)

RS(RS)

RR(RR)


8/13

RA(RA)

RM(RM)

RB(RB)

RG(RG)

RE(RE)

C(C)

R99 IND(R99Ind)

DCS1800/PCS1900 support(FuncExt)

MNC 3 digits support(MNC3Digits)

NACC support(NACCSupport)

TBF establish support(TBF_EST)

Signal extended uplink TBF support(Signal_EUTBF)

Extended uplink dynamic allocation support(ExUpDynSupport)

Downlink TBF retry(DlTBFRetry)

Resource pool for PS rate(PsAbisThs,%)

EMLPP channel reserved threshold(EMLPPThs,%)

CS channel reserved time(CsThs,%)

Max PS user PERTS(MaxPsUserPerts)

Max users of POC service on shared PS channel(PsCapaThs)

Longitude(Longitude)

Latitude(Latitude)

MSP support(MSPSupport)

Flex A support(FlexASupport)

Flex GB support(FlexGBSupport)

TC type support(TCType)

RIM support(RIMSupport)

RIM retry times(RIMRetryTimes)

OMCB IP(OMCB)

Virtual IP(VirtualIP)

Multi PLMN support(MPLMNSupport)

AMR full active codec set(AmrFullAcs)

AMR half active codec set

Thresholds of AMR

Hysteresis of AMR

Enable noise control(IsAmrNscb)

Initial codec mode(IsAmrICM)

Start mode(AmrStartMode)

HR channel fragment finishing support(HRDfragSupport)HR channel percentage threshold(HRTsPercentage)

AMR dynamic HR conversion threshold(AmrHRThs)

DFCA support(DFCASupport)

Voice uplink target C/I

Voice downlink target C/I

Voice uplink minimum C/I

Voice downlink minimum C/I

Report voice quality(VoiceQualityReport)

IP TOS(IPTOS)

GE support(GESupport)

Different reselection parameter in idle and transfer status

support(PSReselParam2)

MR report support(MrRptEnable)

BTS of different net handover support(InterNetHO)Threshold of packet service busy-level on TRX(TrxPSBusyThs)

Blocking/Unblocking period(T1,100ms)

Protective time for No.7 signal instantaneous disconnection(T3,100ms)

Global resetting period(T4,100ms)

Protection period for handover request(T7,100ms)

Source BSC handover executing period(T8,100ms)

Assignment period(T10,100ms)

Protection period for global resetting(T13,100ms)

First overload period of flow traffic control(T17,100ms)

Second overload period of flow traffic control(T18,100ms)


9/13


10/13

Max attempt period of reset(NS_T5,100ms)

Protection time for FUC channel type change(ccmT1,100ms)

Protection time for T-network connection(ccmT2,100ms)

Protection time for LSP movement(ccmT3,100ms)

Handover protecting timer to WCDMA/FDD(RmsT3121,100ms)

Get static parameter timer(GetStaticParamTimer,100ms)

Timer for MSG waiting(TWaitMsg,100ms)

Timer for RANCSEST waiting(TWaitRancsEst,100ms)

Timer for RANCSCLECOM waiting(TWaitRancsCleCom,100ms)

Length of super vision(LcsSuperVision,100ms)

Length of radio(LcsRadio,100ms)

LCS wait intra BSS handover timer(LcsWaitInTraHO,100ms)

PS channel delay release timer(PSRelDelay,100ms)

ATER wait SCCP connection timer(TAterWaitConn,100ms)

ATER wait resource timer(TWaitAterRes,100ms)

ATER wait resource release timer(TAterWaitRel,100ms)

ATER handover monitor timer(TAterMoniterHO,100ms)

ATER block circuit timer(TAterCicBlk,100ms)

ATER block circuit group timer(TAterBlkCicGrp,100ms)

ATER reset timer(TAterRst,100ms)

ATER reset guard timer(TITCRst,100ms)

ATER block a interface circuit timer(TBlkACic,100ms)

ATER block a interface circuit group timer(TBlkACicGrp,100ms)

ATER wait resource acknowledge timer(TWaitAterResAck,100ms)

RIR timer(TRIR,100ms)

RI timer(TRI,100ms)

RIAE timer(TRIAE,100ms)

HO performed ack timer(TwaitHoPFMAck,100ms)

Timer for CCM waiting(CcmWaitTimer,100ms)

ATER reset circuit timer(TAterRstCic,100ms)

Queue indicate when assign(QueueIndAss)

Queue allowed when handover(QueueIndHo)

Forced release indicate when assign(PreemptionIndAss)

Forced release allowed when handover(PreemptionIndHo)

Forced handover indication for assign(ForcedHoIndAss)

Forced handover indication for handover(ForcedHoIndHo)

Strategy for preemption when assign(AssPreemptstrategy)Strategy for preemption when handover(HoPreemptstrategy)

Max forced handover times when assign(AssForcedHoTry)

Max forced handover times when handover(HoForcedHoTry)

Max forced release times when assign(AssForcedRelTry)

Max forced release times when handover(HoForcedRelTry)

Preemption duration when assign(AssPreempTimer,100ms)

Preemption duration when handover(HoPreempTimer,100ms)

Timer for start forced release when assign(AssForceRelTimer,100ms)

Timer for start forced release when handover(HoForceRelTimer,100ms)

Interval for search forced handover target when

assign(AssForceHoInterval,100ms)

Interval for search forced handover target whenhandover(HoForceHoInterval,100ms)

Interval for search forced release target when

assign(AssForceRelInterval,100ms)

Interval for search forced release target when

handover(HoForceRelInterval,100ms)

Wait resource timer after forced handover(ForceHoWait,100ms)

Wait resource timer after forced release(ForceRelWait,100ms)

Queue timer for assign(RmsT11,100ms)

Queue timer for handover(RmsTqho,100ms)


11/13

Enough low priority for preemption(LowestPriority)

Enough call duration for preemption(LongCallDuration)

Forced handover target penalty time(ForceHoPenalty)

Priority of emergency service(EmergServicelPrio)

Info

Optimized POC service support(PocSupport)

Highest coding scheme of POC service(PocAttSelt)

Highest coding scheme of signal TBF(SigTBFMaxCode)

HBTS scan begin timer(HBTSScanBT)

HBTS scan cycle(HBTSScanCyc,3600s)

HBTS scan site number(HBTSScanSiteNum)

LLC frame rerouting(LLCTransupport)

Max resending times for physical information(NY1)

Emergency call allowed(EmergencyCall)

Multi-band report indication(MulbandReport)

New setup cause indication(NECI)

Power offset indication(PowerOffsetInd)

Power offset(PowerOffset,2db)

Queue allowed when assign

Preemption allowed when assign or handover

Number of candidate cells for handover(CandidateNum)

Cipher mode(CipherMode)

CCCH load indication period(CcchLoadIndPrd,s)

CCCH load indication

Overload sending period(OverloadPrd,s)

Average bursts count surveyed by RACH(AvgSlots)

RACH receiving signal level threshold for busy burst(RachBusyThs)

T200 timer/SDCCH(5ms)

Interval of re-sending repeating physical info message(10ms)

BCCH switch allowed(CanBcchExch)

SDCCH dynamic configuration allowed(CanSdcchDyn)

TA maximum(TaMax)

TA allowed(TaAllowed)

Dynamic HR support indication(DynaHREnable)

Subcell used(SubCellUsed)

Frequency band of subcell(SubFreqBand)

AMR full active codec set(AmrFullAcs)AMR half active codec set

Thresholds of AMR

Hysteresis of AMR

Enable noise control(IsAmrNscb)

Initial codec mode(IsAmrICM)

Start mode(AmrStartMode)

Forced handover indication

Channel Select Strategy

Uplink level(PcUlLevWindow)

Weight value of weighted average uplink intensity

Downlink level(PcDlLevWindow)

Weight value of weighted average downlink intensity

Uplink quality(PcUlQualWindow)

Weight value of weighted average uplink qualityDownlink quality(PcDlQualWindow)

Weight value of weighted average downlink quality

Min interval of power control(PcMinInterval,SACCH double frame)

Uplink power control allowed(PwrControlUl)

Downlink power control allowed(PwrControlDl)

Power increasing step(db)

Power decreasing step(db)

Max power level of MS(MsTxPwrMax)

Min power level of MS(MsTxPwrMin)

Min power level of BS(BsTxPwrMin)

PLAN_NETWORK_TABLE

PLAN_POC_SAMPLING_TABLE


12/13

Increase uplink level

Decrease uplink level

Increase uplink quality

Decrease uplink quality

Increase downlink level

Decrease downlink level

Increase downlink quality

Decrease downlink quality

P value. If there are P in N uplink intensity mean values are lower than

PcUlInclLevThs value, power will increase

N value. If there are P in N uplink intensity mean values are lower than


P value. If there are P in N uplink intensity mean values are higher than

PcUlInclLevThs value, power will decrease

N value. If there are P in N uplink intensity mean values are higher than


P value. If there are P in N uplink quality mean values are higher than

PcUlInclQualThs value (worse), power will increase

N value. If there are P in N uplink quality mean values are higher than


P value. If there are P in N uplink quality mean values are lower than

PcUlInclQualThs value, power will decrease

N value. If there are P in N uplink quality mean values are lower than

PcUlInclQualThs value, power will decrease

P value.If there are P in N downlink intensity mean values are lower than


N value. If there are P in N downlink intensity mean values are lower than


P value. If there are P in N downlink intensity mean values are higher than


N value. If there are P in N downlink intensity mean values are higher than


P value. If there are P in N downlink quality mean values are higher than


N value. If there are P in N downlink quality mean values are higher than


P value. If there are P in N uplink (downlink) quality mean values are lower

than PcUlInclQualThs value, power will decrease

N value. If there are P in N uplink (downlink) quality mean values are lower

than PcUlInclQualThs value, power will decrease

Power decrease limit

Report period of measurement for power control(PwrCtrlReportPrd)

Uplink power control strategy(UlPwCtrl)

Downlink power control strategy(DlPwCtrl)

Expected signal intensity of MS(SS_BTS)

Downlink power control mode(PwCtrlMode)

Power control level(PwCtrlLev)

Power descending of PDCH to BCCH in a mode(P0,2db)

Downlink rapid power control indication(DlRapidPcInd)Uplink rapid power control indication(UlRapidPcInd)

Uplink quality(PcUlQualWindow)

Weight value of weighted average uplink quality

Downlink quality(PcDlQualWindow)

Access minimal signal level(RxLevAsMin)

Maximum initial access signal level(MsTxMaxCCH)


Cell reselection temporary offset(TempOffset,db)

Penalty time of cell reselection(PenalTime,10s)

HSC exist(HCS_EXIST)

Threshold of HSC signal level(HCS_THR)

PLAN_RESELECTION_CELL_TABLE

PLAN_POC_TABLE


13/13

HCS priority(PrioClass)

PLAN_TRX_TABLE Priority(TrxPriority)

2G Parameter List ZTE

Documents

Transcript of 2G Parameter List ZTE