28662146 Discharge Pr Drop Pipe Size

13
Legends: DESIGN INPUT 1 DESIGN PRESSURE 597.38 42 2 DESIGN TEMPERATURE 302.00 150 Group Material Forgings Castings MINIMUM VALVE PRESSURE CLASS (AS PER ASME B16.34, 1998) STANDARD CLASS 300 SPECIAL CLASS 300S SELECT VALVE PRESSURE CLASS 0 Available PDT's PDT - Joint Type - Comments 307A - TIG/GTAW 308 - TIG SELECT PDT PIPE MATERIAL 24 in & <: A106 Gr B PIPE THICKNSS TYPE OF SYSTEM KG/CM 2 (g) 0 C 2 in & <: Sch 80: 2-1/2 - 8 in: Sch 40: Open fields for user User can change from Drop Down Menu

description

pressure drop calcs

Transcript of 28662146 Discharge Pr Drop Pipe Size

Page 1: 28662146 Discharge Pr Drop Pipe Size

Legends:

DESIGN INPUT

1 DESIGN PRESSURE 597.38 42

2 DESIGN TEMPERATURE 302.00 150

Group Material Forgings Castings

MINIMUM VALVE PRESSURE CLASS (AS PER ASME B16.34, 1998)

STANDARD CLASS 300SPECIAL CLASS 300S

SELECT VALVE PRESSURE CLASS 0

Available PDT's PDT - Joint Type - Comments307A - TIG/GTAW308 - TIG

SELECT PDT

PIPE MATERIAL 24 in & <: A106 Gr B

PIPE THICKNSS

TYPE OF SYSTEM

KG/CM2 (g)

0C

2 in & <: Sch 80: 2-1/2 - 8 in: Sch 40:

Open fields for user

User can change from Drop Down Menu

Page 2: 28662146 Discharge Pr Drop Pipe Size

L&T-SARGENT & LUNDY PIPE SIZE & WALL THICKNESS CALCULATION Page 2 of 12

PSIZE & WALL THK., CALC-31.1 Print Date: 04/22/2023

S.NO DESCRIPTION FORMULAE UNITS

1 SYSTEM

2 FLOW DIAGRAM

3 LINE DESIGNATION NO Node: 8-9 Node: 9-10 Node: 10-11

4 OPERATING MODE Design Design Design5 NO. OF LEADS NO 1 1 16 TOTAL MASS FLOW 30 30 307 MASS FLOW PER LEAD KG/HR8 MASS FLOW PER LEAD KG/HR Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:5119 OPERATING PRESSURE

10 OPERATING TEMPERATURE11 SPECIFIC VOLUME @ P1 & T1 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511

12 VOLUMETRIC FLOW/LEAD Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511

13 VELOCITY M/SEC 1.1 1.1 1.1 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.014 REQUIRED FLOW AREA Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:51115 REQUIRED PIPE I.D M Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:51116 REQUIRED PIPE I.D MM Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511

17 SELECTED PIPE NB MM100.00 100.00 100.00 200.00 150.00 150.00 150.00 150.00 150.00 150.00 150.00 150.00 150.00 150.00 150.00 150.00 150.00 150.00

18 PIPE O..D. MM 114.30 114.30 114.30 219.08 168.27 168.27 168.27 168.27 168.27 168.27 168.27 168.27 168.27 168.27 168.27 168.27 168.27 168.27

19 MATERIAL OF CONSTRUCTION

A106 Gr B A106 Gr B A106 Gr B A106 Gr B A335 Gr P-91 A335 Gr P-91 A335 Gr P-91 A335 Gr P-91 A335 Gr P-91 A335 Gr P-91 A335 Gr P-91 A335 Gr P-91 A335 Gr P-91 A335 Gr P-91 A335 Gr P-91 A335 Gr P-91 A335 Gr P-91 A335 Gr P-9120 DESIGN PRESSURE 42.000 42.000 42.000 42.000 42.000 42.000 42.000 42.000 42.000 42.000 42.000 42.000 42.000 42.000 42.000 42.000 42.000 42.00021 DESIGN TEMPERATURE 150.000 150.000 150.000 150.000 150.000 150.000 150.000 150.000 150.000 150.000 150.000 150.000 150.000 150.000 150.000 150.000 150.000 150.000

22 KSI 15.0 15.0 15.0 15.0 #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

23 ALLOWABLE STRESS 1054.60 1054.60 1054.60 1054.60 #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

24 NUMBER 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000

25 MM 1.6000 1.6000 1.6000

26 NUMBER 0.400 0.400 0.400 0.400 0.400 0.400 0.400 0.400 0.400 0.400 0.400 0.400 0.400 0.400 0.400 0.400 0.400 0.400

27 MINIMUM CALCULATED PIPE THICKNESS MM 3.84 3.84 3.84 4.29 #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

28 MILL NEGATIVE TOLERANCE % 12.500 12.500 12.500 12.500 12.500 12.500 12.500 12.500 12.500 12.500 12.500 12.500 12.500 12.500 12.500 12.500 12.500 12.500

29 MM 4.39 4.389 4.389 4.907 #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A

30 SELECTED THICKNESS OF PIPE MM 6.02 6.02 6.02 23.01 18.26 18.26 18.26 18.26 18.26 18.26 18.26 18.26 18.26 18.26 18.26 18.26 18.26 18.26

31 PIPE I.D M 0.102 0.102 0.102 0.173 0.132 0.132 0.132 0.132 0.132 0.132 0.132 0.132 0.132 0.132 0.132 0.132 0.132 0.132

32 FLOW AREA 0.008 0.008 0.008 0.024 0.014 0.014 0.014 0.014 0.014 0.014 0.014 0.014 0.014 0.014 0.014 0.014 0.014 0.01433 VELOCITY(CALCULATED) M/SEC Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511

SCH STD STD STD 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160

33 A VELOCITY SPECIFIED M/SEC 1.100 1.100 1.10033 B SPECIAL WALL THICKNESS PIPE MM33 C SPECIFIC VOLUME @ P1 & T1 0.001 0.001 0.001

Forwarding pump discharge to heater

Heater outlet to Discharge strainer

Strainer to Boiler Unit-2

NLEAD

NTOTAL(GPM) M3/HRNTOTAL(KG/HR)

QPERLEAD =NTOTAL/ NLEAD

PSOURCE KG/CM2 (A)TSOURCE

0CSVSOURCE M3/KG

QVPERLEAD = (QPERLEAD x SVSOURCE ) / 3600 M3/SEC

VASSUMED

AREQ =QVPERLEAD / VASSUMED M2

DID_REQ =(SQRT(AREQ x 4/ 3.14))

DNB

DO

PDESIGN KG/CM2 (G)TDESIGN

0CALLOWABLE STRESS (AS PER ASME B31.1 TABLE A-2) SEKSI

SKGCM=(SKSI x1000) / 14.2233 KG/CM2

WELD JOINT EFFICIENCY(AS PER ASME B31.1) EWELD

CORROSION/EROSION/THREADING ALLOWANCE ALCORRO

COEFFICIENT (AS PER ASME B31.1 TABLE104.1.2(A)) YCOF

TMIN=(((PDESIGN x DO x 0.1) /( 2 x (YCOF x PDESIGN + SKGCM x EWELD))+(ALCORRO)/10) x 10

TOLMILL

MINIMUM REQUIRED WALL THICKNESS FOR THE PIPE TM-REQ=(TMIN / (1-(TOLMILL/100))

TSELECT

DID=(DO - ( 2 x TSELECT )) / 1000

AFLOW = ( 3.14 x DID x DID / 4 ) M2

VCAL = QV_PERLEAD / AFLOW

VASSUMED

TSELECT

SVSOURCE M3/KG

E7
Put M3/HR Flow If not known put "Null"
F7
Put M3/HR Flow If not known put "Null"
G7
Put M3/HR Flow If not known put "Null"
H7
Put M3/HR Flow If not known put "Null"
I7
Put M3/HR Flow If not known put "Null"
J7
Put M3/HR Flow If not known put "Null"
K7
Put M3/HR Flow If not known put "Null"
L7
Put M3/HR Flow If not known put "Null"
M7
Put M3/HR Flow If not known put "Null"
N7
Put M3/HR Flow If not known put "Null"
O7
Put M3/HR Flow If not known put "Null"
P7
Put M3/HR Flow If not known put "Null"
Q7
Put M3/HR Flow If not known put "Null"
R7
Put M3/HR Flow If not known put "Null"
S7
Put M3/HR Flow If not known put "Null"
T7
Put M3/HR Flow If not known put "Null"
U7
Put M3/HR Flow If not known put "Null"
V7
Put M3/HR Flow If not known put "Null"
E8
Put KG/HR flow If not known put "Null"
F8
Put KG/HR flow If not known put "Null"
G8
Put KG/HR flow If not known put "Null"
H8
Put KG/HR flow If not known put "Null"
I8
Put KG/HR flow If not known put "Null"
J8
Put KG/HR flow If not known put "Null"
K8
Put KG/HR flow If not known put "Null"
L8
Put KG/HR flow If not known put "Null"
M8
Put KG/HR flow If not known put "Null"
N8
Put KG/HR flow If not known put "Null"
O8
Put KG/HR flow If not known put "Null"
P8
Put KG/HR flow If not known put "Null"
Q8
Put KG/HR flow If not known put "Null"
R8
Put KG/HR flow If not known put "Null"
S8
Put KG/HR flow If not known put "Null"
T8
Put KG/HR flow If not known put "Null"
U8
Put KG/HR flow If not known put "Null"
V8
Put KG/HR flow If not known put "Null"
E26
Input the Corrosion allow. For C.S. use 1.5 mm, for S.S and Steam Use 0
F26
Input the Corrosion allow. For C.S. use 1.5 mm, for S.S and Steam Use 0
G26
Input the Corrosion allow. For C.S. use 1.5 mm, for S.S and Steam Use 0
H26
Input the Corrosion allow. For C.S. use 1.5 mm, for S.S and Steam Use 0
I26
Input the Corrosion allow. For C.S. use 1.5 mm, for S.S and Steam Use 0
J26
Input the Corrosion allow. For C.S. use 1.5 mm, for S.S and Steam Use 0
K26
Input the Corrosion allow. For C.S. use 1.5 mm, for S.S and Steam Use 0
L26
Input the Corrosion allow. For C.S. use 1.5 mm, for S.S and Steam Use 0
M26
Input the Corrosion allow. For C.S. use 1.5 mm, for S.S and Steam Use 0
N26
Input the Corrosion allow. For C.S. use 1.5 mm, for S.S and Steam Use 0
O26
Input the Corrosion allow. For C.S. use 1.5 mm, for S.S and Steam Use 0
P26
Input the Corrosion allow. For C.S. use 1.5 mm, for S.S and Steam Use 0
Q26
Input the Corrosion allow. For C.S. use 1.5 mm, for S.S and Steam Use 0
R26
Input the Corrosion allow. For C.S. use 1.5 mm, for S.S and Steam Use 0
S26
Input the Corrosion allow. For C.S. use 1.5 mm, for S.S and Steam Use 0
T26
Input the Corrosion allow. For C.S. use 1.5 mm, for S.S and Steam Use 0
U26
Input the Corrosion allow. For C.S. use 1.5 mm, for S.S and Steam Use 0
V26
Input the Corrosion allow. For C.S. use 1.5 mm, for S.S and Steam Use 0
E40
SPECIFY VELOCITY IN M/SEC
F40
SPECIFY VELOCITY IN M/SEC
G40
SPECIFY VELOCITY IN M/SEC
H40
SPECIFY VELOCITY IN M/SEC
I40
SPECIFY VELOCITY IN M/SEC
J40
SPECIFY VELOCITY IN M/SEC
K40
SPECIFY VELOCITY IN M/SEC
L40
SPECIFY VELOCITY IN M/SEC
M40
SPECIFY VELOCITY IN M/SEC
N40
SPECIFY VELOCITY IN M/SEC
O40
SPECIFY VELOCITY IN M/SEC
P40
SPECIFY VELOCITY IN M/SEC
Q40
SPECIFY VELOCITY IN M/SEC
R40
SPECIFY VELOCITY IN M/SEC
S40
SPECIFY VELOCITY IN M/SEC
T40
SPECIFY VELOCITY IN M/SEC
U40
SPECIFY VELOCITY IN M/SEC
V40
SPECIFY VELOCITY IN M/SEC
E41
NON SCHEDULE PIPE THK. IN MM
F41
NON SCHEDULE PIPE THK. IN MM
G41
NON SCHEDULE PIPE THK. IN MM
H41
NON SCHEDULE PIPE THK. IN MM
I41
NON SCHEDULE PIPE THK. IN MM
J41
NON SCHEDULE PIPE THK. IN MM
K41
NON SCHEDULE PIPE THK. IN MM
L41
NON SCHEDULE PIPE THK. IN MM
M41
NON SCHEDULE PIPE THK. IN MM
N41
NON SCHEDULE PIPE THK. IN MM
O41
NON SCHEDULE PIPE THK. IN MM
P41
NON SCHEDULE PIPE THK. IN MM
Q41
NON SCHEDULE PIPE THK. IN MM
R41
NON SCHEDULE PIPE THK. IN MM
S41
NON SCHEDULE PIPE THK. IN MM
T41
NON SCHEDULE PIPE THK. IN MM
U41
NON SCHEDULE PIPE THK. IN MM
V41
NON SCHEDULE PIPE THK. IN MM
E42
Specific Volume for specific fluids in M3/KG
F42
Specific Volume for specific fluids in M3/KG
G42
Specific Volume for specific fluids in M3/KG
H42
Specific Volume for specific fluids in M3/KG
I42
Specific Volume for specific fluids in M3/KG
J42
Specific Volume for specific fluids in M3/KG
K42
Specific Volume for specific fluids in M3/KG
L42
Specific Volume for specific fluids in M3/KG
M42
Specific Volume for specific fluids in M3/KG
N42
Specific Volume for specific fluids in M3/KG
O42
Specific Volume for specific fluids in M3/KG
P42
Specific Volume for specific fluids in M3/KG
Q42
Specific Volume for specific fluids in M3/KG
R42
Specific Volume for specific fluids in M3/KG
S42
Specific Volume for specific fluids in M3/KG
T42
Specific Volume for specific fluids in M3/KG
U42
Specific Volume for specific fluids in M3/KG
V42
Specific Volume for specific fluids in M3/KG
Page 3: 28662146 Discharge Pr Drop Pipe Size

L&T-SARGENT & LUNDY PIPE FLOW HEAD LOSS & PRESSURE DROP PDROP - Prog. No.: 03.5.065.02.0O

Page 3 of 12

PDROP-REV 2, PRESSURE_DROPRev. Date: 01-25-2002 Print Date: 04/22/2023

PURPOSE

Determine resistance coefficient (K), equivalent length (L/D) in pipe diameters, head loss, and pressure drop for pipe flow problems.

INSTRUCTIONS

Input the number of fittings, size, ratio or length as requested. If a fitting is not shown, it's K or L/D value should be computed separately and input into the "Other" row.

NOTES1. L/D and K's are calculated as per MES-2.16. 4. Friction factor (f) equation is from MES-2.10. Valid for 0.000001<e/d<0.01

2. Specific instructions are attached to cells as notes. 5. Branch flow K values for reducing tees/laterals/wyes are assumed to

3. Shaded cells are required input to the spreadsheet. be on the branch pipe (smaller ID).

From Node - To Node FORMULAE0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000

OPERATING MODE Design Design DesignPIPE SEGMENT

4.026 4.026 4.026 6.813 5.187 5.187 5.187 5.187 5.187 5.187 5.187 5.187 5.187 5.187 5.187 5.187 5.187 5.187 Length - L (M) 2.00 18.00 480.00

BENDS

90° Short Radius - Quantity 45° Short Radius - Quantity 90° Long Radius - Quantity 4 4 28 45° Long Radius - Quantity

Radius - r/d

Quantity n (nos.)

Number of Miter Breaks 1 1 1 1 1 1 1 1 1

QuantityTEES90 deg. Converging - Flow Through Run

Quantity n (nos.)90 deg. Diverging - Flow Through Run

Quantity n (nos.)90 deg. Converging - Flow Through Br.

4 4 Quantity n (nos.) 1 1

90 deg. Diverging - Flow Through Branch4 4 4

Quantity n (nos.) 1 1 145 deg. Converging - Flow Through Run

Quantity n (nos.)45 deg. Diverging - Flow Through Run

Quantity n (nos.)45 deg. Converging - Flow Through Br.

Quantity n (nos.)

45 deg. Diverging - Flow Through Branch

Quantity n (nos.)135 deg. Converging Flow Through Run

Quantity n (nos.)135 deg. Diverging Flow Through Run

Quantity n (nos.)135 deg. Converging Flow Through Br.

Quantity n (nos.)135 deg. Diverging Flow Through Branch

Quantity n (nos.)Wye Converging Flow

Quantity n (nos.)Wye Diverging Flow

Quantity n (nos.)

VALVESPressure Class 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300Gate - Disk - QuantityBall - Quantity 2 2 2Globe - Conventional - QuantityGlobe - Y Pattern - QuantityAngle - Conventional - QuantityPlug - 100% Port - QuantityPlug - 3 way - 80% Run Fow - QuantityPlug - 3 way - 80% Br. Flow - QuantityCheck - Swing - Quantity 1Check - Tilting Disk - QuantityCheck - Y Type Stop - QuantityCheck - Globe Stop - QuantityCheck - Angle Stop - QuantityCheck - In Line Ball - QuantityButterfly - Quantity

MISCELLANEOUS FITTINGSPipe EntrancePipe Inside Diameter - di (in)Edge radius - r (in)

Forwarding pump discharge to heater

Heater outlet to Discharge strainer

Strainer to Boiler Unit-2

Major Inside Diameter - d1 (in)

Elbow

Pipe Bend

Included Angle of Bend - a (degrees)

Miter Bend Included Angle of Bend - a (degrees)

Branch Inside Diameter - d2 (in)

Branch Inside Diameter - d2 (in)

Run Inside Diameter - d2 (in)

Run Inside Diameter - d2 (in)

Branch Inside Diameter - d2 (in)

Branch Inside Diameter - d2 (in)

Run Inside Diameter - d2 (in)

Run Inside Diameter - d2 (in)

Branch Inside Diameter - d2 (in)

Branch Inside Diameter - d2 (in)

Run Inside Diameter - d2 (in)

Run Inside Diameter - d2 (in)

Run Inside Diameter - d2 (in)

Run Inside Diameter - d2 (in)

A12
In the cells "From Node - To Node" insert a "name" for the pipe segment. For example, T1, T2, T3, ..Tn, or 1-2, 2-3, 3-4,…etc.
A13
Pipe inside diameter in inches. If the pipe segment contains two different pipe diameters, input the one which involves the most pipe.
A14
Pipe segment length in Meter. If the pipe segment contains two pipe diameters, the total length should be input.
A16
An "Elbow" is a fabricated pipe bend. It turns the flow either 90 or 45 degrees.
A17
A short radius elbow with a 90 degree bend. The radius of a short radius elbow is equal to the nominal pipe diameter.
A18
A short radius elbow with a 45 degree bend. The radius of a short radius elbow is equal to the nominal pipe diameter.
A19
A long radius elbow with a 90 degree bend. The radius of a long radius elbow is equal to 1.5 times the nominal pipe diameter.
A20
A long radius elbow with a 45 degree bend. The radius of a long radius elbow is equal to 1.5 times the nominal pipe diameter.
A21
A pipe bend typically has a radius greater than 1.5 pipe diameters. It is not a fitting, but is created by bending a section of pipe through an angle.The factors given here are intended to apply to pipe sizes greater than or equal to 2 in. nominal diameter. The K value is computed per the equation in Figure MES-2.16-09 of MES-2.16.
A22
r/d is the bend radius. For example, for a 3D bend. Input 3.
A23
"alpha" is the included angle. This should be a value less than 180 degrees. For a 90 deg. bend, input 90 deg. For a 45 deg. bend, input 135.
A24
Input the number of bends in the pipe segment.
A25
The K value of a miter bend is computed according to Figure MES-2.16-10 of MES-2.16. Only bends with up to 3 miters can be input.
A26
Input the angle (alpha) of the miter. Alpha is an angle less than 90 degrees. For a 90 deg. bend, input 90 deg. For a 45 deg. bend, input 45.
A27
Input the number of miters in the bend using the scroll bar. The equation given in Fig. 2.16-10 of MES-2.16 is only applicable for bends with from 1-3 miters.
A28
Input the number of miter bends in the pipe segment.
A29
The resistance at a tee connection is dependant upon the flow direction in the branch and run. If the flow in the branch pipe is known to be zero, the K value for the tee can be ignored. The resistance values calculated are reasonable for most applications. However, the actual K value can greatly differ from those calculated if the difference in branch pipe size (or velocity) greatly differs from the run pipe size (or velocity). If branch/run flow ratios are known, the tables in MES-2.16 will give more accurate results.
A30
The resistance through the run of a 90 degree tee. The branch is considered part of the run pipe. The flow in the branch pipe is into the tee.
A31
Input the inside diameter (inches) of the branch pipe. The branch pipe size must be less than or equal to the run pipe size.
A32
Input the number of tees in the pipe segment. If there are multiple tees, they are all assumed to be the same size and type.
A33
The resistance through the run of a 90 degree tee. The branch is considered part of the run pipe. The flow in the branch pipe is out of the tee.
A34
Input the inside diameter (inches) of the branch pipe. The branch pipe size must be less than or equal to the run pipe size.
A35
Input the number of tees in the pipe segment. If there are multiple tees, they are all assumed to be the same size and type.
A36
The resistance through the branch of a 90 degree tee. The fitting is considered part of the branch pipe. The flow in the branch pipe is into the tee.
A37
Input the inside diameter (inches) of the run pipe. The run pipe size must be greater than or equal to the branch pipe size.
A38
Input the number of tees in the pipe segment. If there are multiple tees, they are all assumed to be the same size and type. For this fitting, generally input 1.
A39
The resistance through the branch of a 90 degree tee. The fitting is considered part of the branch pipe. The flow in the branch pipe is out of the tee.
A40
Input the inside diameter (inches) of the run pipe. The run pipe size must be greater than or equal to the branch pipe size.
A41
Input the number of tees in the pipe segment. If there are multiple tees, they are all assumed to be the same size and type. For this type of fitting, generally input 1.
A42
The resistance through the run of a 45 degree tee. The fitting is considered part of the run pipe. The flow in the branch pipe is into the tee
A43
Input the inside diameter (inches) of the branch pipe. The branch pipe size must be less than or equal to the run pipe size.
A44
Input the number of tees in the pipe segment. If there are multiple tees, they are all assumed to be the same size and type.
A45
The resistance through the run of a 45 degree tee. The fitting is considered part of the run pipe. The flow in the branch pipe is out of the tee
A46
Input the inside diameter (inches) of the branch pipe. The branch pipe size must be less than or equal to the run pipe size.
A47
Input the number of tees in the pipe segment. If there are multiple tees, they are all assumed to be the same size and type.
A48
The resistance through the branch of a 45 degree tee. The fitting is considered part of the branch pipe. The flow in the branch pipe is into the tee.
A49
Input the inside diameter (inches) of the run pipe. The run pipe size must be greater than or equal to the branch pipe size.
A50
Input the number of tees in the pipe segment. If there are multiple tees, they are all assumed to be the same size and type. For this type of fitting, generally input 1.
A51
The resistance through the branch of a 45 degree tee. The fitting is considered part of the branch pipe. The flow in the branch pipe is out of the tee.
A52
Input the inside diameter (inches) of the run pipe. The run pipe size must be greater than or equal to the branch pipe size.
A53
Input the number of tees in the pipe segment. If there are multiple tees, they are all assumed to be the same size and type. For this type of fitting, generally input 1.
A54
The resistance through the branch of a 135 degree tee. The fitting is considered part of the run pipe. The flow in the branch pipe is into the tee.
A55
Input the inside diameter (inches) of the branch pipe. The branch pipe size must be less than or equal to the run pipe size.
A56
Input the number of tees in the pipe segment. If there are multiple tees, they are all assumed to be the same size and type.
A57
The resistance through the branch of a 135 degree tee. The fitting is considered part of the run pipe. The flow in the branch pipe is out of the tee.
A58
Input the inside diameter (inches) of the branch pipe. The branch pipe size must be less than or equal to the run pipe size.
A59
Input the number of tees in the pipe segment. If there are multiple tees, they are all assumed to be the same size and type.
A60
The resistance through the branch of a 45 degree tee. The fitting is considered part of the branch pipe. The flow in the branch pipe is into the tee.
A61
Input the inside diameter (inches) of the run pipe. The run pipe size must be greater than or equal to the branch pipe size.
A62
Input the number of tees in the pipe segment. If there are multiple tees, they are all assumed to be the same size and type. For this type of fitting, generally input 1.
A63
The resistance through the branch of a 45 degree tee. The fitting is considered part of the branch pipe. The flow in the branch pipe is out of the tee.
A64
Input the inside diameter (inches) of the run pipe. The run pipe size must be greater than or equal to the branch pipe size.
A65
Input the number of tees in the pipe segment. If there are multiple tees, they are all assumed to be the same size and type. For this type of fitting, generally input 1.
A66
The resistance through the branch of a wye fitting. The fitting is considered part of the branch pipe. The flow in the branch pipe is into the wye.
A67
Input the inside diameter (inches) of the run pipe. The run pipe size must be greater than or equal to the branch pipe size.
A68
Input the number of wyes in the pipe segment. If there are multiple wyes, they are all assumed to be the same size and type. For this type of fitting, generally input 1.
A69
The resistance through the branch of a wye fitting. The fitting is considered part of the branch pipe. The flow in the branch pipe is out of the wye.
A70
Input the inside diameter (inches) of the run pipe. The run pipe size must be greater than or equal to the branch pipe size.
A71
Input the number of wyes in the pipe segment. If there are multiple wyes, they are all assumed to be the same size and type. For this type of fitting, generally input 1.
A72
K values for valves are dependant upon pressure class. Valves with a pressure class greater than or equal to 300 lb, have a smaller K value. The K values given are averages based on a survey of many different manufacturers. Unless otherwise noted the valves are fully open.
A73
Input valve pressure class if there are valves in the pipe segment. The K value of valves with a pressure class of less than or equal to 300 lbs is smaller than for other valves.
A74
A disc type gate valve. Input the quantity of valves in the pipe segment.
A75
A ball type valve. An L/D is not given in MES 2.16, therefore, an L/D of 3 is given based on Crane 410 for valves with a Pressure Class 300 lb and smaller. Other ball valves have a L/D 25% greater. Input the quantity of valves in the pipe segment.
A76
A globe valve. Input the quantity of valves in the pipe segment.
A77
A Y-Pattern globe valve. The flow is diverging. Input the quantity of valves in the pipe segment.
A78
A conventional angle valve. Input the quantity of valves in the pipe segment.
A79
A plug (or cock) type valve. Straight through-port area. Input the quantity of valves in the pipe segment.
A80
A three way plug type valve. Flow thru run. Fully open. Port area is 80% of pipe area. Input the quantity of valves in the pipe segment.
A81
A three way plug type valve. Flow thru branch. Fully open. Port area is 80% of pipe area. Input the quantity of valves in the pipe segment.
A82
A conventional swing type check valve. Input the quantity of valves in the pipe segment.
A83
A tilting disk type check valve. Input the quantity of valves in the pipe segment.
A84
A Y type stop check valve. Input the quantity of valves in the pipe segment.
A85
A globe type stop check valve. Input the quantity of valves in the pipe segment.
A86
An angle type stop check valve. Input the quantity of valves in the pipe segment.
A87
An in-line ball type stop check valve. Input the quantity of valves in the pipe segment.
A88
A butterfly type valve. Input the quantity of valves in the pipe segment.
A90
Flow into a pipe. For example, at a tank.
A91
Inside pipe diameter at the pipe entrance (in inches)
A92
Radius of the pipe inlet edge. A conservative sharp edged entrance has r=0
Page 4: 28662146 Discharge Pr Drop Pipe Size

L&T-SARGENT & LUNDY PIPE FLOW HEAD LOSS & PRESSURE DROP PDROP - Prog. No.: 03.5.065.02.0O

Page 4 of 12

PDROP-REV 2, PRESSURE_DROPRev. Date: 01-25-2002 Print Date: 04/22/2023

From Node - To Node FORMULAE0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000

Forwarding pump discharge to heater

Heater outlet to Discharge strainer

Strainer to Boiler Unit-2

Pipe ExitExit Inside diameter - do (in) 4.026Reducer

Small Dia Pipe Segment

Large Dia Pipe Segment

Strainer

L/D VALUE SUMMARY90° Short Radius Elbow45° Short Radius Elbow90° Long Radius Elbow 56 56 39245° Long Radius Elbow

Pipe BendMiter Bend90° Std. Tee - Converg. Flow Thru Run90° Std. Tee - Diverg. Flow Thru Run L/D=32 if d1 <= 2, otherwise L/D=1290° Std. Tee - Converg. Flow Through Br. 29 2990° Std. Tee - Diverg. Flow Through Br. 60 60 6045° Std. Tee - Converg. Flow Throu Run45° Std. Tee - Diverg. Flow Throu Run45° Std. Tee - Converg. Flow Through Br.45° Std. Tee - Diverg. Flow Through Br.135° Std. Tee - Converg. Flow Thru Run135° Std. Tee - Diverg. Flow Thru Run135° Std. Tee - Converg. Flow Through Br.135° Std. Tee - Diverg. Flow Through Br.Wye - Std. Tee - Converging FlowWye - Std. Tee - Diverging FlowValve - Gate - Disk L/D=8 if <= 300#, otherwise L/D=12Valve - Ball L/D=3 if <= 300#, otherwise L/D=4 6 6 6Valve - Globe - Conventional L/D=400 if <= 300#, otherwise L/D=600Valve - Globe - Y Pattern L/D=100 if <= 300#, otherwise L/D=125Valve - Angle - Conventional L/D=150 if <= 300#, otherwise L/D=225Valve - Plug - 100% port L/D=18 if <= 300#, otherwise L/D=22Valve - Plug - 80% port L/D=44 <= 300#, otherwise L/D=55Valve - Plug - 80% branch L/D=140 if <= 300#, otherwise L/D=175Valve - Check - Swing L/D=50 if <= 300#, otherwise L/D=200 50Valve - Check - Tilting Disk L/D=60 if <= 300#, otherwise L/D=140Valve - Check - Y type stop L/D=100 if <= 300#, otherwise L/D=125Valve - Check - Globe stop L/D=400 if <= 300#, otherwise L/D=500Valve - Check - Angle stop L/D=150 if <= 300#, otherwise L/D=225Valve - Check - In line ball L/D=600 if <= 300#, otherwise L/D=800Small Dia Pipe SegmentLarge Dia Pipe SegmentOther L/D

Total: Ld 201 151 458 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

K VALUE SUMMARY

90° Red. Tee - Converg. Flow Thru Run

90° Reducing Tee - Diverg. Flow Thru Run90° Red. Tee - Converg. Flow Through Br.90° Red. Tee - Diverg. Flow Through Br.

45° Red. Tee - Converg. Flow Thru Run

45° Reducing Tee - Diverg. Flow Thru Run45° Red. Tee - Converg. Flow Through Br.45° Red. Tee - Diverg. Flow Through Br.

135° Red. Tee - Converg. Flow Thru Run

135° Red. Tee - Diverg. Flow Thru Run

135° Red. Tee - Converg. Flow Thru Br.

135° Red. Tee - Diverg. Flow Thru Br.Wye - Red. Tee - Converging FlowWye - Red. Tee - Diverging FlowValve - Butterfly - Fully Open

Pipe Entrance

Pipe Exit 1.00

Reducer - Sudden Expansion

Reducer - Sudden Contraction

StrainerOther k

Total: 0.00 0.00 1.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00HEAD LOSS AND PIPE PRESSURE DROPRoughness Coefficient - e (ft)

Roughness Coefficient - e (ft) 0.00015 0.00015 0.00015 0.00015 0.00015 0.00015 0.00015 0.00015 0.00015 0.00015 0.00015 0.00015 0.00015 0.00015 0.00015 0.00015 0.00015 0.00015Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511

Absolute Viscosity of the Fluid - (centipoise) Err:511 Err:511 Err:511Absolute Viscosity of the Fluid - (centipoise) Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511Flow Rate - Q (lg/hr) Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511Velocity - V (m/sec) Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511

Reynolds No. - Re Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511

Sudden Expansion - Other ID - d2 (in)Sudden Contraction - Other ID - d2 (in)

Segment Inside Diameter - dS (in)Length - LS (ft)

Segment Inside Diameter - dL (in)Length - LL (ft)

Open Area/Total Area - A0 /A2

If d1 <= 2" L/D = 60, otherwise, L/D =20If d1 <= 2" L/D = 15, otherwise, L/D =10If d1 <= 2" L/D = 60, otherwise, L/D =14.If d1 <= 2" L/D = 15, otherwise, L/D =10

L/D=32 if d1 <= 2, otherwise L/D=27

L/D=70 if d1 <= 2, otherwise L/D=29L/D=70 if d1 <= 2, otherwise L/D=60L/D=20 if d1 <= 2, otherwise L/D=11L/D=30 if d1 <= 2, otherwise L/D=16

L/D=15 if d1 <= 2, otherwise L/D=8L/D=56 if d1 <= 2, otherwise L/D=30L/D=95 if d1 <= 2, otherwise L/D=51L/D=30 if d1 <= 2, otherwise L/D=16L/D=74 if d1 <= 2, otherwise L/D=40

L/D=242 if d1 <= 2, otherwise L/D=130d1 > 2" L/D=13d1 > 2" L/D=26

(12 x LS / d1) x (((d1 / ds)^5)-1))(12 x LL / d1) x (((d1/dL)^5)-1))

n x (-1.33*(d2/d1)^3+1.63 x (d2/d1)^2+0.17 x (d2/d1))n x (0.18 x (d2/d1)^4))n x (-0.6 x (d1/d2)+1)n x (-1.48 x (d1/d2)+2.39)

n x (-0.28 x (d2/d1)^3+0.44 x (d2/d1)^2-0.05 x (d2/d1))n x (0.18 x (d2/d1)^4)n x (-0.51 x (d1/d2)+0.65)n x (-1.53 x (d1/d2)+1.88)

n x (-2.18 x (d2/d1)^3+2.59 x (d2/d1)^2+0.31 x (d2/d1))n x (0.18 x (d2/d1)^4)

n x (-4.56 x (d1/d2)^3+6.2 x (d1/d2)^2-1.11 x (d1/d2))n x (-0.88 x (d1/d2)+2.42)IF(d2<2.25,"NA",n x 0.62)IF(d2<2.25,"NA",n x 0.17)n x (1.04 x d1^-0.44))

IF(r/di<=0.04,((d1/di)^4) x (225 x (r/di)^2-15.5 x (r/di)+0.5),IF(r/di<0.15,((r/di)^4) x (0.4227 x 2.7183^(-15.734 x (r/di))),((d1/di)^4) x 0.04)))(d1/do)^4)

IF(d2>d1,(1-(d1/d2)^2)^2,((d1/d2)^4) x ((1-(d2/d1)^2)^2)))

IF(d2>d1,0.5 x (1-d1^2/d2^2),((d1/d2)^4) x (0.5 x (1-d2^2/d1^2))))0.3158 x (A0 /A2)^-2.4616)

Weight Density of the Fluid - (kg/m3)

(1000 x d1 x 0.0254 x Q) / ((1/Q) x density)

A93
Flow out of a pipe. For example flow into a tank or pump suction.
A94
The pipe inside diameter (in inches) at the pipe exit.
A95
A fitting at which the pipe diameter changes.
A96
A conservative K value for a reducer where the pipe diameter suddenly increases (in the direction of flow). Input the pipe diameter which is different from the segment's major pipe diameter d1.
A97
A conservative K value for a reducer where the pipe diameter suddenly decreases (in the direction of flow). Input the pipe diameter which is different from the segment's major pipe diameter d1.
A98
If the pipe segment contains a small section of a smaller diameter pipe, the effect can be modeled without creating a separate pipe segment.
A99
Input the inside diameter of the smaller diameter pipe segment.
A100
Input the length of the smaller diameter pipe segment. The length cannot exceed the total segment length L
A101
If the pipe segment contains a small section of a large diameter pipe, the effect can be modeled without creating a separate pipe segment.
A102
Input the inside diameter of the larger diameter pipe segment.
A103
Input the length of the larger diameter pipe segment. The length cannot exceed the total segment length L
A104
Conservative resistance of a strainer or coarse filter. Note: The result may not be accurate for very small Re (in the range of 50 to 400).
A105
Input the ratio of pipe open area (A0) to total pipe area (A2).
B108
If the pipe ID is <= 2" L/D = 60, otherwise, L/D =20.
B109
If the ID is <= 2" L/D = 15, otherwise, L/D =10.
B110
If the ID is <= 2" L/D = 60, otherwise, L/D =14.
B111
If the ID is <= 2" L/D = 15, otherwise, L/D =10.
B112
K is computed per a curve fit equation developed from a table of values given in Fig MES-2.16-01 of MES 2.16. The curve fit has 3 parts based on the value of r/d.
B113
A curve fit equation based on a table of values in MES 2.16( for a 1-miter bend) is used to determine the K value. Values for 2-miter bends and 3-miter bends are found by multiplying the 1-miter case by 1/3 and 1/4 respectively.
B114
L/D=32 if ID <= 2, otherwise L/D=27.
B115
L/D=32 if ID <= 2, otherwise L/D=12.
B116
L/D=70 if ID <= 2, otherwise L/D=29.
B117
L/D=70 if ID <= 2, otherwise L/D=60.
B118
L/D=20 if ID <= 2, otherwise L/D=11
B119
L/D=30 if ID <= 2, otherwise L/D=16
B120
L/D=15 if ID <= 2, otherwise L/D=8
B121
L/D=56 if ID <= 2, otherwise L/D=30
B122
L/D=95 if ID <= 2, otherwise L/D=51
B123
L/D=30 if ID <= 2, otherwise L/D=16
B124
L/D=74 if ID <= 2, otherwise L/D=40
B125
L/D=242 if ID <= 2, otherwise L/D=130
B126
This fitting typically only occurs in pipe sizes > 2". L/D=13.
B127
This fitting typically only occurs in pipe sizes > 2". L/D=26.
B128
L/D=8 if the Pressure Class is <= 300, otherwise L/D=12.
B129
L/D=3 if the Pressure Class is <= 300, otherwise L/D=4.
B130
L/D=400 if the Pressure Class is <= 300, otherwise L/D=600.
B131
L/D=100 if the Pressure Class is <= 300, otherwise L/D=125.
B132
L/D=150 if the Pressure Class is <= 300, otherwise L/D=225.
B133
L/D=18 if the Pressure Class is <= 300, otherwise L/D=22.
B134
L/D=44 if the Pressure Class is <= 300, otherwise L/D=55.
B135
L/D=140 if the Pressure Class is <= 300, otherwise L/D=175.
B136
L/D=50 if the Pressure Class is <= 300, otherwise L/D=200.
B137
L/D=60 if the Pressure Class is <= 300, otherwise L/D=140.
B138
L/D=100 if the Pressure Class is <= 300, otherwise L/D=125.
B139
L/D=400 if the Pressure Class is <= 300, otherwise L/D=500.
B140
L/D=150 if the Pressure Class is <= 300, otherwise L/D=225.
B141
L/D=600 if the Pressure Class is <= 300, otherwise L/D=800.
B142
An extra L/D value is computed to account for the small diameter pipe segment based on equation 2-5 of Crane 410.
B143
An extra L/D value is computed to account for the large diameter pipe segment based on equation 2-5 of Crane 410.
B144
The user may input the total of any miscellaneous L/D values here. Documentation of the L/D value calculations should be provided by the user.
B147
A K value is computed based on the equation given in Table MES-2.16-03.
B148
A K value is computed based on the equation given in Table MES-2.16-03.
B149
A K value is computed based on the equation given in Table MES-2.16-03.
B150
A K value is computed based on the equation given in Table MES-2.16-03.
B151
A K value is computed based on the equation given in Table MES-2.16-03.
B152
A K value is computed based on the equation given in Table MES-2.16-03.
B153
A K value is computed based on the equation given in Table MES-2.16-03.
B154
A K value is computed based on the equation given in Table MES-2.16-03.
B155
A K value is computed based on the equation given in Table MES-2.16-03.
B156
A K value is computed based on the equation given in Table MES-2.16-03.
B157
A K value is computed based on the equation given in Table MES-2.16-03.
B158
K =0.62 based on the value given in Table MES-2.16-03.
B159
K=0.17 based on the value given in Table MES-2.16-03.
B160
An curve fit equation was developed based on the nomograph given in MES 2.16. The equation gives similar values which are good for both low and high pressure design valves.
B161
A curve fit equation is used to determine the K value based on a table of values given in MES 2.16. If the entrance has a smaller/larger diameter than the pipe segment, the result is modified by a equation 2.5 of Crane 410.
B162
K=1 per MES 2.16. However, if the entrance has a smaller/larger diameter than the pipe segment, the result is modified by a equation 2.5 of Crane 410.
B163
An equation from MES 2.16 is used to determine the K value. If the reducer is considered part of the larger diameter pipe segment, the K value is modified by equation 2.5 of Crane 410.
B164
An equation from MES 2.16 is used to determine the K value. If the reducer is considered part of the larger diameter pipe segment, the K value is modified by equation 2.5 of Crane 410.
B165
A curve fit equation developed from Figure MES 2.16-12 is used to determine the K value. The equation is only intended for Re>400. If Re is <400, a value should be found from MES2.16-12 and input as an "other" K.
B166
The user may input the total of any miscellaneous K values here. Documentation of the K value calculations should be provided by the user.
B167
The user may input the total of any miscellaneous K values here. Documentation of the K value calculations should be provided by the user.
B170
By User
B171
The roughness coefficient is dependant upon the pipe material. Typical values are 0.00015 for clean steel and 0.003 for dirty steel.
B172
Input the weight density of the fluid as given in handbooks. For water at 60 F, density = 62.4 lb/ft3
B173
By User for Gas and Air Services
B174
Input the absolute viscosity of the fluid as given in handbooks. For water at 60 F, the abs. Viscosity = 1.18 centipoise
B175
Input the flow rate of the fluid in the pipe segment.
B177
Reynolds number is found from eq. 3.3 of Crane 410.
Page 5: 28662146 Discharge Pr Drop Pipe Size

L&T-SARGENT & LUNDY PIPE FLOW HEAD LOSS & PRESSURE DROP PDROP - Prog. No.: 03.5.065.02.0O

Page 5 of 12

PDROP-REV 2, PRESSURE_DROPRev. Date: 01-25-2002 Print Date: 04/22/2023

From Node - To Node FORMULAE0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000

Forwarding pump discharge to heater

Heater outlet to Discharge strainer

Strainer to Boiler Unit-2

e/d 4.5E-04 4.5E-04 4.5E-04 2.6E-04 3.5E-04 3.5E-04 3.5E-04 3.5E-04 3.5E-04 3.5E-04 3.5E-04 3.5E-04 3.5E-04 3.5E-04 3.5E-04 3.5E-04 3.5E-04 3.5E-04

Friction Factor - f Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511L/D - Fittings Ld 201.0 151.0 458.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0L/D - Straight Pipe - Lds 19.6 176.0 4693.9 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0Total L/D (Fittings + Straight Pipe) Ldt Ld+Lds 220.6 327.0 5151.9 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0Total L/D Converted to an Equivalent K f x Ldt Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511K - Fittings k 0.00 0.00 1.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00Total K - All Straight Pipe & All Fittings - Kt Kt = K+k Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511

Total Head Loss - Delta H (M) (Kt x V^2)/(2*9.81) Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511

(H x Density / 10000) Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511 Err:511

e x 12 / d1

IF(Re<4000,64/Re,1.325/(LN((Ed/3.7)+5.74/(Re^0.9)))^2)

(L) / (d1 x 0.0254)

Total Pressure Drop - Delta P (kg/cm2)

B178
The relative roughness is found by dividing the roughness coefficient by the pipe ID.
B179
The friction factor is computed using the modified Colbrook equation (see MES 2.10)
B180
The total L/D from fittings on the pipe segment (not including the straight pipe)
B181
The total L/D based on the straight pipe on the pipe segment.
B182
The sum of the L/D for the straight pipe plus the fittings.
B183
The total L/D computed above is converted into K based on K=fL/D
B184
The total K value of the fittings in the pipe segment.
B185
The total K value represents the resistance of all of the fittings and straight piping in the pipe segment.
B187
The total head loss (M) in the pipe segment calculated from H= (KV^2)/2g
B188
The total pressure drop (kg/cm2) in the pipe segment is computed from P=H*density/10000
Page 6: 28662146 Discharge Pr Drop Pipe Size

04/22/2023

document.xls

Index Description Index Description

1 1

2 2 24 in & <: A106 Gr B

3 24 in & <: (XS) 34 24 in & <: Sch 80 4 24 in & <: A335 Gr P11

5 5

6 6 24 in & <: A335 Gr P22

7 24 in & <: Sch 10S 7

8 8 24 in & <: A335 Gr P5

9 9

10 10

1 11 11

12 8 in. & <: 40S (STD) 12

13 13

14 14

15 15

16 16

17 24 in. & <: Sch 160 17 AWWA C106/ANSI A21.6

18 6 in. & <: XXS 18 AWWA C151/ANSI A21.5

19 24 in. & <: XXS 1920 8 in. & <: XXS 20 8 in. & <: A312

21 21 A213 Gr 304 or 316

22 22 A213 Gr 316L

23 23

24 24

25 25

2 in & <: Sch 80: 2-1/2 - 10 in: Sch 40: 12-24 in: 3/8 in (Std) >24 in: 3/8

plate

24 in & <: A106 Gr B > 24 in : A 672 B70

CL23 or B60 CL22

2 in & <: Sch 80: 2-1/2 - 10 in:

Sch 40: 12-24 in: 3/8 in (Std)

24 in & <: A335 Gr P11 >24 in : A691 1-1/2

Cr CL22

8 in & <: Sch 80 10-24 in: 1/2

(Std)

24 in & <: A335 Gr P22 >24 in: A691 2-1/2

Cr CL22 12 in & <: Sch 40S 14 in & > 3/8

(Std)24 in & <: A335 Gr P5 > 24 in: A691 Gr5 Cr

CL22 12 in & <: Sch 40S

(STD) 14 in & >: 3/8(Std)

2 in & <: Sch 80: 2-1/2 - 24 in:

Sch 40:

12 in & <: A312 or A376 TP304 14 in & >: A358 Gr 304 Class

1 or 2

2 in & <: Sch 80: 2-1/2 - 8 in: Sch

40:

12 in & <: A312 or A376 TP304 14

in & >: A409 Gr TP304 2 in & <: XS:

2-1/2 - 10 in: Std: 12-24 in: 3/8 in (Std)

>24 in: 3/8 plate

12 in & <: A312 or A376 TP304L 14 in & >: A358 Gr 304L

Class 1 or 2

12 in & <: A312 or A376 TP316 14 in & >: A358 Gr 316 Class

1 or 212 in & <: Sch 80S (XS) 14 in & >:

11/2(XS)

12 in & <: A312 or A376 TP316 14

in & >: A409 Gr 316

2 in & <: Sch 80: 2-1/2 - 6 in: Sch 40: 8-24

in: Sch 60

12 in & <: A312 or A376 TP316L 14 in & >: A358 Gr 316L

Class 1 or 2

8 in & <: Sch 80 10-24 in: XS

Copper tubing 1-1/8 & >: B88 Type K <1-1/8: B88 Tyupe K or B75 No. 120 or

122

3 in. & <: Sch 160 3.5 & >: Sch 120

24 in & <: A106 Gr B >24 in: A134 Gr A283C or API 5L Gr B

24 in. & <: 53 Gr B Galv. >24 in.: A134 Gr

A283C or API 5L Gr B

1 in. OD tubing 0.049 in wall

1 in. OD tubing 0.049 in wall

1 in. OD tubing 0.056 to 0.083 in. wall

24 in. & <: A312 or A376 TP304

1 in. OD tubing 0.056 to 0.109 in. wall

24 in. & <: A312 or A376 TP316

1 in. OD tubing 0.083 to 0.220 in. wall

24 in. & <: A312 or A376 TP316L

Page 7: 28662146 Discharge Pr Drop Pipe Size

Valve Ratings 04/22/2023

document.xls 7

0F 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 2.1 2.2 2.3 2.4 2.5 2.6 2.7Table 3 150

-20 285 290 265 235 265 225 290 235 290 290 290 235 290 290 290 275 275 230 275 275 260 260100 285 290 265 235 265 225 290 235 290 290 290 235 290 290 290 275 275 230 275 275 260 260200 260 260 250 215 260 225 260 220 260 260 260 215 260 260 260 235 235 195 245 255 230 235300 230 230 230 210 230 225 230 215 230 230 230 205 230 230 230 205 215 175 230 230 220 220400 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 180 195 160 200 200 200 200500 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 145 170 170 170 170600 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140650 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125700 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110750 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95800 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80850 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65900 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50950 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35

1000 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 201050 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 201100 20 20 20 20 20 20 20 20 20 20 20 20 20 20 201150 20 20 20 20 20 20 20 20 20 20 20 20 20 20 201200 15 15 15 20 20 15 15 20 20 20 20 20 20 20 201250 20 20 20 20 20 201300 20 20 20 20 20 201350 20 20 20 20 20 201400 20 20 20 20 20 201450 15 20 20 15 10 101500 10 20 20 15 10 10

0F Table 4 300

-20 740 750 695 620 695 590 750 620 750 750 750 615 750 750 750 720 720 600 720 720 670 670100 740 750 695 620 695 590 750 620 750 750 750 615 750 750 750 720 720 600 720 720 670 670200 675 750 655 560 680 590 750 570 750 750 750 555 745 750 750 600 620 505 645 660 605 605300 655 730 640 550 655 590 720 555 720 730 730 535 715 730 730 540 560 455 595 615 570 570400 635 705 620 530 640 570 695 555 695 705 705 530 705 705 705 495 515 415 550 575 535 535500 600 665 585 500 620 550 665 555 665 665 665 525 665 665 665 465 480 380 515 540 505 505600 550 605 535 455 605 535 605 555 605 605 605 520 605 605 605 435 450 360 485 515 480 480650 535 590 525 450 590 525 590 555 590 590 590 510 590 590 590 430 445 350 480 505 465 470700 535 570 520 450 570 510 570 545 570 570 570 505 570 570 570 425 430 345 465 495 455 455750 505 505 475 445 530 475 530 515 530 530 530 455 530 530 530 415 425 335 460 490 445 450800 410 410 390 370 510 475 510 510 510 510 510 440 510 510 510 405 420 330 450 485 435 435850 270 270 270 270 485 460 485 485 485 485 485 415 485 485 485 395 420 320 445 485 425 425900 170 170 170 170 450 440 450 450 450 450 450 375 370 450 450 390 415 440 450 415 420950 105 105 105 105 280 315 315 320 320 375 280 275 275 375 385 380 385 385 385 385 385

1000 50 50 50 50 165 200 200 215 215 260 165 200 200 255 365 320 350 355 365 335 3451050 155 160 145 145 175 165 145 145 170 360 310 345 315 360 290 3351100 95 95 95 110 110 100 100 115 300 255 305 270 325 225 2601150 60 60 60 70 80 60 60 75 225 200 235 235 275 170 1901200 40 40 40 40 45 35 35 50 145 155 185 185 170 130 1351250 115 145 140 125 100 1051300 85 115 110 95 80 751350 60 95 85 70 60 601400 50 75 65 55 45 451450 35 60 50 40 30 351500 25 40 40 35 25 25

0F Table 5 400 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.1 1.11 1.12 1.13 1.14 1.15 2.1 2.2 2.3 2.4 2.5 2.6 2.7

-20 990 1000 925 825 925 790 1000 825 1000 1000 1000 825 1000 1000 1000 960 960 800 960 960 895 895100 990 1000 925 825 925 790 1000 825 1000 1000 1000 825 1000 1000 1000 960 960 800 960 960 895 895200 900 1000 875 750 905 790 1000 765 1000 1000 1000 745 995 1000 1000 800 825 675 860 880 805 810300 875 970 850 730 870 790 975 745 965 970 970 715 955 970 970 720 745 605 795 820 760 760400 845 940 825 705 855 765 925 740 925 940 940 710 940 940 940 660 685 550 735 765 710 715500 800 885 775 665 830 735 885 740 885 885 855 700 885 885 885 620 635 510 685 720 670 675600 730 805 710 610 805 710 805 740 805 805 805 690 805 805 805 580 600 480 650 685 635 640650 715 785 695 600 785 695 785 740 785 785 785 680 785 785 785 575 590 470 635 670 620 625700 710 755 690 600 755 685 755 725 755 755 755 670 755 755 755 565 580 460 620 660 610 610750 670 670 630 590 710 630 710 685 710 710 710 605 705 710 710 555 570 450 610 655 595 600600 550 550 520 495 675 630 675 675 675 675 675 585 675 675 675 540 565 440 600 650 580 580850 355 355 355 355 650 615 650 650 650 650 650 555 645 650 650 530 555 430 595 645 565 570900 230 230 230 230 600 590 600 600 600 600 600 500 495 600 600 520 555 590 600 555 555950 140 140 140 140 375 420 420 425 425 505 375 365 365 505 515 510 515 515 515 515 515

1000 70 70 70 70 220 270 270 290 290 345 220 265 265 340 485 430 465 475 485 450 4601050 205 210 190 190 235 220 190 190 230 480 410 460 415 480 390 450

Page 8: 28662146 Discharge Pr Drop Pipe Size

Valve Ratings 04/22/2023

document.xls 8

1100 130 130 130 145 145 135 135 150 400 345 405 360 430 300 3451150 80 80 80 90 110 80 80 100 295 265 315 315 365 230 2501200 50 50 50 55 60 45 45 70 190 205 245 245 230 175 1851250 150 195 185 165 135 1351300 115 155 145 125 105 1001350 80 130 115 90 80 801400 65 100 85 75 60 601450 45 80 70 55 40 451500 35 55 55 45 30 35

0F Table 6 600 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.1 1.11 1.12 1.13 1.14 1.15 2.1 2.2 2.3 2.4 2.5 2.8 2.7

-20 1480 1500 1390 1235 1390 1185 1500 1235 1500 1500 1500 1235 1500 1500 1500 1440 1440 1200 1440 1440 1345 1345100 1480 1500 1390 1235 1390 1185 1500 1235 1500 1500 1500 1235 1500 1500 1500 1440 1440 1200 1440 1440 1345 1345200 1350 1500 1315 1125 1360 1185 1500 1145 1500 1500 1500 1115 1490 1500 1500 1200 1240 1015 1290 1320 1210 1215300 1315 1455 1275 1095 1305 1185 1445 1115 1445 1455 1455 1075 1430 1455 1455 1080 1120 910 1190 1230 1140 1140400 1270 1410 1235 1060 1280 1145 1385 1105 1385 1410 1410 1060 1410 1410 1410 995 1025 825 1105 1145 1065 1070500 1200 1330 1165 995 1245 1105 1330 1105 1330 1330 1330 1055 1330 1330 1330 930 955 765 1030 1080 1010 1015600 1095 1210 1065 915 1210 1065 1210 1105 1210 1210 1210 1035 1210 1210 1210 875 900 720 975 1025 955 960650 1075 1175 1045 895 1175 1045 1175 1105 1175 1175 1175 1025 1175 1175 1175 860 890 700 955 1010 930 935700 1065 1135 1035 895 1135 1025 1135 1085 1135 1135 1135 1010 1135 1135 1135 850 870 685 930 990 910 910750 1010 1010 945 885 1065 945 1065 1030 1065 1065 1065 905 1055 1065 1065 830 855 670 915 985 895 900800 825 825 780 740 1015 945 1015 1015 1015 1015 1015 880 1015 1015 1015 805 845 660 900 975 870 875850 535 535 535 535 975 920 975 975 975 975 975 830 965 975 975 790 835 645 895 970 850 855900 345 345 345 345 900 885 900 900 900 900 900 745 740 900 900 780 830 885 900 830 835950 205 205 205 205 560 630 630 640 640 755 560 550 550 755 775 765 775 775 775 775 775

1000 105 105 105 105 330 405 405 430 430 520 330 400 400 505 725 640 700 715 725 670 6851050 310 315 290 290 350 330 290 290 345 720 615 685 625 720 585 6701100 190 190 190 220 220 200 200 225 605 515 610 545 645 445 5201150 125 125 125 135 165 125 125 150 445 400 475 475 550 345 3751200 75 75 75 80 90 70 70 105 290 310 370 370 345 260 2751250 225 299 280 245 200 2051300 170 235 220 185 160 1501350 125 190 170 135 115 1151400 95 150 130 110 90 901450 70 115 105 80 60 651500 55 85 75 70 50 50

0F Table 7 900 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.1 1.11 1.12 1.13 1.14 1.15 2.1 2.2 2.3 2.4 2.5 2.6 2.7

-20 2220 2250 2085 1850 2085 1775 2250 1850 2250 2250 2250 1850 2250 2250 2250 2160 2160 1800 2160 2160 2015 2015100 2220 2250 2085 1850 2085 1775 2250 1860 2250 2250 2250 1850 2250 2250 2250 2160 2160 1800 2160 2160 2015 2015200 2025 2250 1970 1685 2035 1775 2250 1715 2250 2250 2250 1670 2235 2250 2250 1800 1860 1520 1935 1980 1815 1820300 1970 2185 1915 1640 1955 1775 2165 1670 2165 2185 2185 1610 2150 2185 2185 1620 1680 1360 1785 1845 1705 1705400 1900 2115 1850 1585 1920 1715 2085 1660 2080 2115 2115 1590 2115 2115 2115 1490 1540 1240 1655 1720 1600 1605500 1795 1995 1745 1495 1865 1655 1995 1660 1995 1995 1995 1580 1995 1995 1995 1395 1435 1145 1545 1620 1510 1520600 1640 1815 1600 1370 1815 1600 1815 1660 1815 1815 1815 1555 1815 1815 1815 1310 1355 1080 1460 1540 1435 1440650 1610 1765 1570 1345 1765 1570 1765 1660 1765 1765 1765 1535 1765 1765 1765 1290 1330 1050 1435 1510 1395 1405700 1600 1705 1555 1345 1705 1535 1705 1630 1705 1705 1705 1510 1705 1705 1705 1275 1305 1030 1395 1485 1370 1370750 1510 1510 1420 1325 1595 1420 1595 1545 1595 1595 1595 1360 1585 1595 1595 1245 1280 1010 1375 1475 1340 1345800 1235 1235 1175 1110 1525 1420 1525 1525 1525 1525 1525 1315 1525 1525 1525 1210 1265 985 1355 1460 1305 1310850 805 805 805 805 1460 1380 1460 1460 1460 1460 1460 1245 1450 1460 1460 1190 1255 965 1340 1455 1275 1280900 515 515 515 515 1350 1325 1350 1350 1350 1350 1345 1120 1110 1350 1350 1165 1245 1325 1350 1245 1255950 310 310 310 310 845 945 945 955 955 1130 845 825 825 1130 1160 1145 1160 1160 1160 1160 1160

1000 155 155 155 155 495 695 605 650 650 780 495 595 595 760 1090 965 1050 1070 1090 1010 10301050 465 475 430 430 525 495 430 430 515 1080 925 1030 940 1080 875 10101100 290 290 290 330 330 300 300 340 905 770 915 815 965 670 7801150 185 185 185 205 245 185 185 225 670 595 710 710 825 515 5651200 115 115 115 125 135 105 105 155 430 465 555 555 515 390 4101250 340 440 420 370 300 3101300 255 350 330 280 235 2251350 185 290 255 205 175 1751400 145 225 195 165 135 1351450 105 175 155 125 95 1001500 80 125 115 105 70 75

0F Table 8 1500 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.1 1.11 1.12 1.13 1.14 1.15 2.1 2.2 2.3 2.4 2.5 2.6 2.7

-20 3705 3750 3470 3085 3470 2955 3750 3085 3750 3750 3750 3085 3750 3750 3750 3600 3600 3000 3600 3600 3360 3360100 3705 3750 3470 3085 3470 2955 3750 3085 3750 3750 3750 3085 3750 3750 3750 3600 3600 3000 3600 3600 3360 3360200 3375 3750 3280 2810 3395 2955 3750 2860 3750 3750 3750 2785 3725 3750 3750 3000 3095 2530 3230 3300 3025 3035300 3280 3640 3190 2735 3260 2955 3610 2785 3610 3640 3640 2685 3580 3640 3640 2700 2795 2270 2975 3070 2845 2845400 3170 3530 3085 2645 3200 2860 3465 2765 3465 3530 3530 2655 3530 3530 3530 2485 2570 2065 2760 2870 2665 2675500 2995 3325 2910 2490 3105 2755 3325 2765 3325 3325 3325 2635 3325 3325 3325 2330 2390 1910 2570 2700 2520 2530600 2735 3025 2665 2285 3025 2665 3025 2765 3025 3025 3025 2590 3025 3025 3025 2185 2255 1800 2435 2570 2390 2400650 2685 2940 2615 2245 2940 2615 2940 2765 2940 2940 2940 2560 2940 2940 2940 2150 2220 1750 2390 2520 2330 2340700 2665 2840 2590 2245 2840 2560 2840 2715 2840 2840 2840 2520 2840 2840 2840 2125 2170 1715 2330 2470 2280 2280750 2520 2520 2365 2210 2660 2365 2660 2570 2660 2660 2660 2265 2640 2660 2660 2075 2135 1680 2290 2460 2230 2245

Page 9: 28662146 Discharge Pr Drop Pipe Size

Valve Ratings 04/22/2023

document.xls 9

800 2060 2060 1995 1850 2540 2365 2540 2540 2540 2540 2540 2195 2540 2540 2540 2015 2110 1645 2255 2435 2170 2185850 1340 1340 1340 1340 2435 2295 2435 2435 2435 2435 2435 2075 2415 2435 2435 1980 2090 1610 2230 2425 2125 2135900 860 860 860 860 2245 2210 2245 2245 2245 2245 2245 1870 1850 2245 2245 1945 2075 2210 2245 2075 2090950 515 515 515 515 1405 1575 1575 1595 1595 1885 1405 1370 1370 1885 1930 1910 1930 1930 1930 1930 1930

1000 260 260 260 260 825 1010 1010 1080 1080 1305 825 995 995 1270 1820 1605 1750 1785 1820 1680 17201050 770 790 720 720 875 825 720 720 855 1800 1545 1720 1565 1800 1460 16801100 480 480 480 550 550 495 495 565 1510 1285 1525 1360 1610 1115 13051150 310 310 310 345 410 310 310 375 1115 995 1185 1185 1370 860 9451200 190 190 190 205 225 170 170 255 720 770 925 925 855 650 6851250 565 735 705 615 495 5151300 430 585 550 465 395 3751350 310 480 430 345 290 2901400 240 380 325 275 225 2251450 170 290 255 205 155 1651500 135 205 190 170 120 130

Table 9 2500 0F 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.1 1.11 1.12 1.13 1.14 1.15 2.1 2.2 2.3 2.4 2.5 2.6 2.7

-20 6170 6250 5785 5145 5785 4930 6250 5145 6250 6250 6250 5145 6250 6250 6250 6000 6000 5000 6000 6000 5600 5600100 6170 6250 5785 5145 5785 4930 6250 5145 6250 6250 6250 5145 6250 6250 6250 6000 6000 5000 6000 6000 5600 5600200 5625 6250 5470 4680 5660 4930 6250 4765 6250 6250 6250 4645 6205 6250 6070 5000 5160 4220 5380 5500 5040 5060300 5470 6070 5315 4560 5435 4930 6015 4645 6015 6070 6070 4475 5965 6070 5880 4500 4660 3780 4960 5120 4740 4740400 5280 5880 5145 4405 5330 4765 5775 4610 5775 5880 5880 4425 5880 5880 5540 4140 4280 3440 4600 4780 4440 4460500 4990 5540 4850 4150 5180 4595 5540 4610 5540 5540 5540 4390 5540 5540 5040 3880 3980 3180 4285 4500 4200 4220600 4560 5040 4440 3805 5040 4440 5040 4610 5040 5040 5040 4320 5040 5040 4905 3640 3760 3000 4060 4280 3980 4000650 4475 4905 4355 3740 4905 4355 4905 4610 4905 4905 4905 4270 4905 4905 4730 3580 3700 2920 3980 4200 3880 3900700 4440 4730 4320 3740 4730 4270 4730 4525 4730 4730 4730 4200 4730 4730 4430 3540 3620 2660 3880 4120 3800 3800750 4200 4200 3945 3685 4430 3945 4430 4285 4430 4430 4430 3770 4400 4430 4230 3460 3560 2800 3820 4100 3720 3740800 3430 3430 3260 3085 4230 3945 4230 4230 4230 4230 4230 3655 4230 4230 4060 3360 3520 2740 3760 4060 3620 3640850 2230 2230 2230 2230 4060 3830 4060 4060 4060 4060 4060 3455 4030 4060 3745 3300 3480 2680 3720 4040 3540 3560900 1430 1430 1430 1430 3745 3685 3745 3745 3745 3745 3745 3115 3085 3745 3220 3240 3460 3680 3745 3460 3480950 860 860 860 860 2345 2630 2630 2655 2655 3145 2345 2285 2285 3145 3030 3180 3220 3220 3220 3220 3220

1000 430 430 430 430 1370 1685 1685 1800 1800 2170 1370 1655 1655 2115 3000 2675 2915 2970 3030 2800 28651050 1285 1315 1200 1200 1455 1370 1200 1200 1430 2515 2570 2865 2605 3000 2430 28001100 800 800 800 915 915 830 830 945 1855 2145 2545 2265 2685 1860 21701150 515 515 515 570 685 515 515 630 1200 1655 1970 1970 2285 1430 15701200 315 315 315 345 370 285 285 430 1285 1545 1545 1430 1085 11451250 945 1230 1170 1030 830 8551300 715 970 915 770 660 6301350 515 800 715 570 485 4851400 400 630 545 455 370 3701450 285 485 430 345 260 2751500 230 345 315 285 200 215

0F Table 10 4500 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.1 1.11 1.12 1.13 1.14 1.15 2.1 2.2 2.3 2.4 2.5 2.6 2.7-20 11110 11250 10415 9260 10415 8870 11250 9260 11250 11250 11250 9260 11250 11250 11250 10800 10800 9000 10800 10800 10080 10080100 11110 11250 10415 9260 10415 8870 11250 9260 11250 11250 11250 9255 11250 11250 11250 10800 10800 9000 10800 10800 10080 10080200 10120 11250 9845 8425 10185 8870 11250 8580 11250 11250 11250 8360 11170 11250 11250 9000 9290 7595 9685 9900 9070 9110300 9845 10925 9565 8210 9780 8870 10830 8360 10830 10925 10925 8055 10740 10925 10925 8100 8390 6805 8930 9215 8530 8530400 9505 10585 9260 7930 9595 8580 10400 8300 10400 10585 10585 7960 10585 10585 10585 7450 7705 6190 8280 8605 7990 8030500 8980 9965 8735 7470 9320 8270 9965 8300 9965 9965 9965 7900 9965 9965 9965 6985 7165 5725 7715 8100 7560 7595600 8210 9070 7990 6850 9070 7990 9070 8300 9070 9070 9070 7775 9070 9070 9070 6550 6770 5400 7310 7705 7165 7200650 8055 8825 7840 6725 8825 7840 8825 8300 8825 8825 8825 7685 8825 8825 8825 6445 6660 5255 7164 7560 6985 7020700 7990 8515 7775 6725 8515 7685 8515 8145 8515 8515 8515 7560 8515 8515 8515 6370 6515 5150 6985 7415 6840 6840750 7560 7560 7100 6635 7970 7095 7970 7715 7970 7970 7970 6790 7920 7970 7970 6230 6410 5040 6875 7380 6695 6730800 6170 6170 5865 5555 7610 7095 7610 7610 7610 7610 7610 6585 7610 7610 7610 6050 6335 4930 6770 7310 6515 6550850 4010 4010 4010 4010 7305 6890 7305 7305 7305 7305 7305 6225 7250 7305 7305 5940 6265 4825 6695 7270 6370 6410900 2570 2570 2570 2570 6740 6635 6740 6740 6740 6740 6735 5605 5555 6740 6740 5830 6230 6625 6740 6230 6265950 1545 1545 1545 1545 4215 4730 4730 4785 4785 5665 4215 4115 4115 5655 5795 5725 5795 5795 5795 5795 5795

1000 770 770 770 770 2470 3035 3035 3240 3240 3910 2470 2985 2985 3805 5450 4815 5245 5350 5450 5040 51551050 2315 2365 2160 2160 2625 2470 2160 2160 2570 5400 4630 5155 4690 5400 4370 50401100 1440 1440 1440 1645 1645 1490 1490 1695 4525 3855 4575 4075 4835 3345 39101150 925 925 925 1030 1235 925 925 1130 3345 2985 3550 3550 4115 2570 28301200 565 565 565 615 670 515 515 770 2160 2315 2775 2725 2570 1955 20551250 1695 2210 2110 1850 1490 15451300 1285 1750 1645 1390 1185 11301350 925 1440 1285 1030 875 8751400 720 1130 975 825 670 6701450 515 875 770 615 465 5001500 410 620 565 515 360 385

0F 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.1 1.11 1.12 1.13 1.14 1.15 2.1 2.2 2.3 2.4 2.5 2.6 2.7Table 3A 150 S

-20 290 290 265 245 265 225 290 245 290 290 290 245 290 290 290 290 290 255 290 290 265 270100 290 290 265 245 265 225 290 245 290 290 290 245 290 290 290 290 290 255 290 290 265 270200 290 290 265 245 265 225 290 245 290 290 290 245 290 290 290 255 265 215 260 275 245 245300 290 290 265 245 265 225 290 245 290 285 290 240 280 290 290 230 240 195 235 250 235 235

Page 10: 28662146 Discharge Pr Drop Pipe Size

Valve Ratings 04/22/2023

document.xls 10

400 290 290 265 245 265 225 290 245 290 280 285 235 275 290 290 210 220 175 210 235 225 225500 290 290 265 245 265 225 290 245 290 275 285 235 275 290 290 200 205 165 195 230 215 215600 275 290 265 230 265 225 290 245 290 275 285 235 270 290 290 185 195 155 185 220 205 205650 270 290 260 225 265 225 290 245 290 275 285 230 270 290 290 185 190 150 185 215 200 200700 265 275 255 220 265 225 280 245 280 275 280 225 265 280 280 180 185 145 180 210 195 195750 240 240 225 210 265 225 280 245 280 265 280 215 255 280 280 175 180 145 180 210 190 190800 200 195 190 180 265 225 275 245 275 260 275 210 245 275 275 175 180 140 175 210 185 185850 130 130 130 130 260 220 260 235 260 245 260 200 230 260 260 170 180 140 175 205 180 180900 85 80 85 85 225 210 230 225 225 230 215 180 175 230 230 165 175 175 205 180 180950 50 50 50 50 135 150 150 155 155 180 135 130 130 180 180 165 175 175 180 175 175

1000 25 25 25 25 80 95 95 105 105 125 80 95 95 120 160 155 160 160 160 160 1601050 75 75 70 70 85 80 70 70 80 160 150 160 155 160 140 1601100 45 45 45 55 55 50 50 55 145 125 145 135 155 105 1251150 30 30 30 35 40 30 30 35 105 95 115 115 130 85 901200 20 20 20 25 20 15 15 25 70 75 90 90 80 60 651250 55 70 65 60 50 501300 40 55 55 45 40 351350 30 45 40 35 30 301400 25 35 30 25 20 201450 15 30 25 20 15 151500 15 20 20 15 10 10

0F 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.1 1.11 1.12 1.13 1.14 1.15 2.1 2.2 2.3 2.4 2.5 2.6 2.7Table 4A 300 S

-20 750 750 695 645 695 590 750 645 750 750 750 645 750 750 750 750 750 670 750 750 695 695100 750 750 695 645 695 590 750 645 750 750 750 645 750 750 750 750 750 670 750 750 695 700200 750 750 695 645 695 590 750 645 750 750 750 645 750 750 750 670 690 565 680 715 640 640300 750 750 695 645 695 590 750 645 750 740 750 620 730 750 750 600 625 505 610 655 610 610400 750 750 695 645 695 590 750 645 750 725 745 615 720 750 750 555 570 460 555 615 590 590500 750 750 695 645 695 590 750 645 750 720 745 615 720 750 750 520 530 425 515 595 560 565600 715 750 695 595 695 590 750 645 750 720 745 610 705 750 750 490 505 400 490 575 535 535650 700 750 680 585 695 590 750 645 750 715 735 595 700 750 750 480 495 390 480 565 520 520700 695 710 665 580 695 590 735 645 735 710 730 585 685 735 735 470 485 380 470 550 505 510750 630 630 590 555 695 590 730 645 730 690 730 565 660 730 730 465 475 375 465 550 500 500800 515 515 490 465 695 590 720 645 720 675 720 550 640 720 720 450 470 365 465 545 485 490850 335 335 335 335 680 575 680 615 680 645 680 520 605 680 680 440 465 360 460 540 475 475900 215 215 215 215 590 555 600 585 585 600 560 465 465 600 600 435 465 455 540 465 465950 130 130 130 130 350 395 395 400 400 470 350 345 345 470 470 425 460 455 470 450 455

1000 65 65 65 65 205 255 255 270 270 325 205 250 250 315 420 405 420 420 420 420 4201050 195 195 180 180 220 205 180 180 215 420 385 420 405 420 365 4201100 120 120 120 135 135 125 125 140 375 320 380 355 405 280 3251150 75 75 75 85 105 75 75 95 280 250 295 295 345 215 2351200 45 45 45 50 55 45 45 65 180 195 230 230 215 165 1701250 140 185 175 155 125 1301300 105 145 135 115 100 951350 75 120 105 85 75 751400 60 95 80 70 55 551450 45 75 65 50 40 401500 35 50 45 45 30 30

0F 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.1 1.11 1.12 1.13 1.14 1.15 2.1 2.2 2.3 2.4 2.5 2.6 2.7Table 5A 400 S

-20 1000 1000 925 860 925 790 1000 860 1000 1000 1000 855 1000 1000 1000 1000 1000 890 1000 1000 925 925100 1000 1000 925 860 925 790 1000 860 1000 1000 1000 855 1000 1000 1000 1000 1000 890 1000 1000 925 930200 1000 1000 925 860 925 790 1000 860 1000 1000 1000 855 1000 1000 1000 890 920 755 910 955 850 850300 1000 1000 925 860 925 790 1000 860 1000 990 1000 830 970 1000 1000 800 813 675 810 875 810 810400 1000 1000 925 860 925 790 1000 860 1000 965 995 825 960 1000 1000 735 760 615 735 825 785 790500 1000 1000 925 860 925 790 1000 860 1000 960 995 825 960 1000 1000 690 710 570 685 795 755 755600 950 1000 925 795 925 790 1000 860 1000 960 995 810 945 1000 1000 650 670 535 650 765 710 715650 935 1000 910 780 925 790 1000 860 1000 955 985 795 930 1000 1000 640 655 520 640 750 695 695700 925 950 885 770 925 790 980 860 980 955 970 785 915 980 980 630 645 510 630 735 675 680750 840 840 790 740 925 790 970 860 970 920 970 755 880 970 970 615 635 500 625 730 665 670800 685 685 650 620 925 790 960 860 960 895 960 730 850 960 960 600 630 490 615 725 645 650850 445 445 445 445 905 765 905 825 905 855 905 690 805 905 905 590 620 480 610 720 635 635900 285 285 285 285 785 735 800 775 785 800 750 625 615 800 800 575 615 605 720 620 620950 170 170 170 170 470 525 525 530 530 630 470 455 455 630 630 565 610 605 630 600 605

1000 85 85 85 85 275 335 335 360 360 435 275 330 330 425 560 545 560 560 560 560 5601050 255 265 240 240 290 275 240 240 285 560 515 560 545 560 485 5601100 160 160 160 185 185 165 165 190 505 430 510 470 540 370 4351150 105 105 105 115 135 105 105 125 370 330 395 395 455 285 3151200 65 65 65 70 75 55 55 85 240 255 310 310 285 215 2301250 190 245 235 205 165 1701300 145 195 185 155 130 1251350 105 160 145 115 100 951400 80 125 110 90 75 751450 55 100 85 70 50 551500 45 70 65 55 40 45

0F 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.1 1.11 1.12 1.13 1.14 1.15 2.1 2.2 2.3 2.4 2.5 2.6 2.7

Page 11: 28662146 Discharge Pr Drop Pipe Size

Valve Ratings 04/22/2023

document.xls 11

Table 6A 600 S-20 1500 1500 1390 1285 1390 1175 1500 1285 1500 1500 1500 1285 1500 1500 1500 1500 1500 1340 1500 1500 1390 1395100 1500 1500 1390 1285 1390 1185 1500 1285 1500 1500 1500 1285 1500 1500 1500 1500 1500 1340 1500 1500 1390 1395200 1500 1500 1390 1285 1390 1185 1500 1285 1500 1500 1500 1285 1500 1500 1500 1335 1380 1130 1365 1430 1280 1275300 1500 1500 1390 1285 1390 1185 1500 1285 1500 1485 1500 1245 1455 1500 1500 1200 1250 1010 1215 1310 1220 1215400 1500 1500 1390 1285 1390 1185 1500 1285 1500 1450 1490 1235 1440 1500 1500 1105 1140 920 1105 1235 1175 1185500 1500 1500 1390 1285 1390 1185 1500 1285 1500 1440 1490 1235 1440 1500 1500 1035 1065 850 1030 1190 1125 1130600 1425 1500 1390 1190 1390 1185 1500 1285 1500 1440 1490 1215 1415 1500 1500 975 1005 805 975 1145 1065 1070650 1400 1500 1360 1170 1390 1185 1500 1285 1500 1430 1475 1190 1395 1500 1500 960 985 780 960 1125 1040 1045700 1390 1425 1330 1160 1390 1185 1465 1285 1465 1425 1455 1175 1370 1465 1465 945 970 765 945 1105 1010 1020750 1260 1260 1185 1105 1390 1185 1460 1285 1460 1380 1455 1130 1320 1460 1460 925 950 745 935 1095 995 1000800 1030 1030 980 925 1390 1185 1440 1285 1440 1345 1440 1095 1275 1440 1440 900 945 735 925 1090 970 975850 670 670 670 670 1355 1150 1355 1235 1355 1285 1355 1035 1210 1355 1355 885 930 720 915 1080 950 950900 430 430 430 430 1175 1105 1200 1165 1175 1200 1125 935 925 1200 1200 865 925 910 1075 925 930950 260 260 260 260 705 790 790 795 795 945 705 685 685 945 945 850 915 910 945 900 910

1000 130 130 130 130 410 505 505 540 540 650 410 495 495 635 840 815 840 840 840 840 8401050 385 395 360 360 435 410 360 360 430 840 770 840 815 840 730 8401100 240 240 240 275 275 250 250 285 755 645 765 705 805 560 6501150 155 155 155 170 205 155 155 190 555 495 505 590 685 430 4701200 95 95 95 105 110 85 85 130 360 385 465 465 430 325 3451250 285 370 350 310 250 2551300 215 290 275 230 200 1901350 155 240 215 170 145 1451400 120 190 165 135 110 1101450 85 145 130 105 75 851500 70 105 95 85 60 65

0F 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.1 1.11 1.12 1.13 1.14 1.15 2.1 2.2 2.3 2.4 2.5 2.6 2.7Table 7A 900 S

-20 2250 2250 2085 1930 2085 1775 2250 1930 2250 2250 2250 1930 2250 2250 2250 2250 2250 2005 2250 2250 2085 2095100 2250 2250 2085 1930 2085 1775 2250 1930 2250 2250 2250 1930 2250 2250 2250 2250 2250 2005 2250 2250 2085 2095200 2250 2250 2085 1930 2085 1775 2250 1930 2250 2250 2250 1930 2250 2250 2250 2005 2070 1695 2045 2145 1915 1915300 2250 2250 2085 1930 2085 1775 2250 1930 2250 2225 2250 1865 2185 2250 2250 1800 1870 1520 1825 1965 1825 1825400 2250 2250 2085 1930 2085 1775 2250 1930 2250 2175 2235 1850 2160 2250 2250 1660 1710 1385 1660 1850 1760 1775500 2250 2250 2085 1930 2085 1775 2250 1930 2250 2160 2235 1850 2160 2250 2250 1555 1595 1280 1545 1785 1685 1695600 2140 2250 2080 1785 2085 1775 2250 1930 2250 2160 2235 1825 2120 2250 2250 1465 1510 1205 1465 1720 1600 1605650 2100 2250 2040 1750 2085 1775 2250 1930 2250 2145 2210 1785 2095 2250 2250 1440 1480 1170 1440 1690 1560 1565700 2080 2135 1995 1735 2085 1775 2200 1930 2200 2135 2185 1760 2055 2200 2200 1415 1455 1145 1415 1655 1520 1525750 1890 1890 1775 1660 2085 1775 2185 1930 2185 2070 2185 1695 1980 2185 2185 1390 1425 1120 1400 1645 1495 1505800 1545 1545 1465 1390 2085 1775 2160 1930 2160 2020 2160 1645 1915 2160 2160 1350 1415 1100 1390 1630 1455 1465850 1005 1005 1005 1005 2030 1725 2030 1850 2030 1930 2030 1555 1815 2030 2030 1325 1400 1075 1375 1625 1425 1425900 645 645 645 645 1760 1660 1800 1750 1760 1800 1685 1400 1390 1800 1800 1300 1390 1365 1615 1390 1400950 385 385 385 385 1055 1185 1185 1195 1195 1415 1055 1030 1030 1415 1415 1275 1375 1365 1415 1350 1365

1000 195 195 195 195 615 760 760 810 810 975 615 745 745 950 1260 1220 1260 1260 1260 1260 12601050 580 590 540 540 655 615 540 540 645 1260 1155 1260 1220 1260 1095 12601100 360 360 360 410 410 375 375 425 1130 965 1145 1060 1210 835 9751150 230 230 230 255 310 230 230 285 835 735 885 885 1030 645 7051200 140 140 140 155 165 130 130 195 540 580 695 695 645 490 5151250 425 555 525 465 375 3851300 320 435 410 345 295 2851350 230 360 320 255 220 2201400 180 285 245 205 170 1651450 130 220 195 155 115 1251500 105 155 140 130 90 95

0F 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.1 1.11 1.12 1.13 1.14 1.15 2.1 2.2 2.3 2.4 2.5 2.8 2.7Table 8A 1500 S

-20 3750 3750 3470 3215 3470 2955 3750 3215 3750 3750 3750 3215 3750 3750 3750 3750 3750 3345 3750 3750 3470 3495100 3750 3750 3470 3215 3470 2955 3750 3215 3750 3750 3750 3215 3750 3750 3750 3750 3750 3345 3750 3750 3470 3495200 3750 3750 3470 3215 3470 2955 3750 3215 3750 3750 3750 3215 3750 3750 3750 3345 3450 2825 3405 3580 3195 3195300 3750 3750 3470 3215 3470 2955 3750 3215 3750 3705 3750 3105 3645 3750 3750 3000 3120 2530 3045 3280 3045 3045400 3750 3750 3470 3215 3470 2955 3750 3215 3750 3620 3730 3085 3600 3750 3750 2765 2850 2305 2765 3085 2935 2955500 3750 3750 3470 3215 3470 2955 3750 3215 3750 3600 3730 3085 3600 3750 3750 2595 2655 2130 2570 2980 2810 2825600 3565 3750 3470 2975 3470 2955 3750 3215 3750 3600 3730 3045 3535 3750 3750 2440 2520 2010 2445 2865 2665 2680650 3495 3750 3400 2920 3470 2955 3750 3215 3750 3580 3685 2980 3495 3750 3750 2395 2465 1950 2400 2815 2600 2610700 3470 3560 3320 2895 3470 2955 3665 3215 3665 3555 3645 2935 3430 3665 3665 2355 2420 1910 2355 2760 2530 2545750 3150 3150 2960 2765 3470 2955 3645 3215 3645 3450 3645 2830 3300 3645 3645 2315 2380 1865 2335 2745 2490 2505800 2570 2570 2445 2315 3470 2955 3600 3215 3600 3365 3600 2745 3195 3600 3600 2250 2355 1835 2315 2720 2420 2440850 1670 1670 1670 1670 3338 2870 3385 3085 3385 3215 3385 2595 3020 3385 3385 2205 2330 1795 2295 2705 2370 2380900 1070 1070 1070 1070 2935 2765 3000 2915 2935 3000 2805 2335 2315 3000 3000 2165 2315 2270 2690 2315 2330950 645 645 645 645 1755 1970 1970 1995 1995 2355 1755 1715 1715 2355 2360 2120 2290 2270 2630 2250 2270

1000 320 320 320 320 1030 1265 1265 1350 1350 1630 1030 1245 1245 1585 2105 2035 2105 2105 2105 2100 21051050 965 985 900 900 1095 1030 900 900 1070 2105 1930 2105 2035 2105 1820 21001100 600 600 600 685 685 620 620 710 1885 1605 1905 1770 2015 1395 16301150 385 385 385 430 515 385 385 470 1395 1245 1480 1480 1715 1070 11801200 235 235 235 255 280 215 215 320 900 965 1155 1155 1070 815 8551250 705 920 880 770 620 6451300 535 730 685 580 495 470

Page 12: 28662146 Discharge Pr Drop Pipe Size

Valve Ratings 04/22/2023

document.xls 12

1350 385 600 535 430 365 3651400 300 470 405 345 280 2801450 215 365 320 255 195 2101500 170 260 235 215 150 160

Table 9A 2500 S 0F 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.1 1.11 1.12 1.13 1.14 1.15 2.1 2.2 2.3 2.4 2.5 2.6 2.7

-20 6250 6250 5785 5360 5785 4930 6250 5360 6250 6250 6250 5355 6250 6250 6250 6250 6250 5570 6250 6250 5785 5820100 6250 6250 5785 5360 5785 4930 6250 5360 6250 6250 6250 5355 6250 6250 6250 6250 6250 5570 6250 6250 5785 5820200 6250 6250 5785 5360 5785 4930 6250 5360 6250 6250 6250 5355 6250 6250 6250 5570 5750 4710 5680 5965 5320 5320300 6250 6250 5785 5360 5785 4930 6250 5360 6250 6180 6250 5180 6070 6250 6250 5000 5200 4215 5070 5465 5070 5070400 6250 6250 5785 5360 5785 4930 6250 5360 6250 6035 6215 5145 6000 6250 6250 4605 4750 3840 4605 5145 4895 4930500 6250 6250 5785 5360 5785 4930 6250 5360 6250 6000 6215 5145 6000 6250 6250 4320 4430 3550 4285 4965 4680 4710600 5940 6250 5780 4955 5785 4930 6250 5360 6250 6000 6215 5070 5895 6250 6250 4065 4195 3350 4070 4775 4445 4465650 5825 6250 5670 4665 5785 4930 6250 5360 6250 5965 6145 4965 5820 6250 6250 3995 4105 3250 4000 4690 4330 4355700 5780 5930 5535 4820 5785 4930 6110 5360 6110 5930 6070 4895 5715 6110 6110 3930 4035 3180 3930 4600 4215 4240750 5250 5250 4930 4610 5785 4930 6070 5360 6070 5750 6070 4715 5500 6070 6070 3855 3965 3110 3895 4570 4150 4175800 4285 4285 4070 3860 5785 4930 6000 5360 6000 5605 6000 4570 5320 6000 6000 3750 3930 3060 3855 4530 4035 4065850 2785 2785 2785 2785 5645 6785 5645 5145 5645 5355 5645 4320 5035 5645 5645 3680 3885 2990 3820 4510 3950 3965900 1785 1785 1785 1785 4895 4605 5000 4855 4895 5000 4680 3895 3855 5000 5000 3605 3855 3785 4485 3860 3885950 1070 1070 1070 1070 2930 3285 3285 3320 3320 3930 2930 2855 2855 3930 3930 3535 3815 3785 3930 3750 3785

1000 535 535 535 535 1715 2105 2105 2250 2250 2715 1715 2070 2070 2645 3505 3395 3505 3505 3505 3500 35051050 1605 1645 1500 1500 1820 1715 1500 1500 1785 3505 3215 3505 3395 3505 3035 35001100 1000 1000 1000 1145 1145 1035 1035 1180 3145 2680 3180 3945 3360 2320 27151150 645 645 645 715 855 645 645 785 2320 2070 2465 2465 2855 1785 19651200 395 395 395 430 465 355 355 535 1500 1605 1930 1930 1785 1355 14301250 1180 1535 1465 1285 1035 10701300 895 1215 1145 965 820 7851350 645 1000 895 715 610 6051400 500 785 680 570 465 4651450 355 610 535 430 320 3451500 285 430 395 355 250 270

0F 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.1 1.11 1.12 1.13 1.14 1.15 2.1 2.2 2.3 2.4 2.5 2.6 2.7Table 10A 4500 S

-20 11250 11250 10415 9645 10415 8870 11250 9645 11250 11250 11250 9645 11250 11250 11250 11250 11250 10030 11250 11250 10415 10480100 11250 11250 10415 9645 10415 8870 11250 9645 11250 11250 11250 9645 11250 11250 11250 11250 11250 10030 11250 11250 10415 10480200 11250 11250 10415 9645 10415 8870 11250 9645 11250 11250 11250 9645 11250 11250 11250 10030 10350 8480 10220 10735 9580 9580300 11250 11250 10415 9645 10415 8870 11250 9645 11250 11120 11250 9320 10930 11250 11250 9000 9360 7585 9130 9835 9130 9130400 11250 11250 10415 9645 10415 8870 11250 9645 11250 10865 11185 9255 10800 11250 11250 8295 8550 6910 8295 9255 8810 8870500 11250 11250 10415 9645 10415 8870 11250 9645 11250 10800 11185 9255 10800 11250 11250 7780 7970 6390 7715 8938 8420 8480600 10690 11250 10405 8920 10415 8870 11250 9645 11250 10800 11185 9130 10605 11250 11250 7315 7555 6025 7330 8600 7995 8035650 10485 11250 10205 8760 10415 8870 11250 9645 11250 10735 11055 8935 10480 11250 11250 7190 7395 5850 7200 8440 7795 7835700 10405 10670 9965 8680 10415 8870 10995 9645 10995 10670 10930 8805 10285 10995 10995 7070 7265 5720 7070 8275 7585 7635750 9450 9450 8870 8295 10415 8870 10930 9645 10930 10350 10930 8485 9900 10930 10930 6945 7135 5595 7005 8230 7475 7515800 7715 7715 7330 6945 10415 8870 10800 9645 10800 10095 10800 8230 9580 10800 10800 6750 7070 5505 6945 8155 7265 7315850 5015 5015 5015 5015 10160 8615 10160 9255 10160 9645 10160 7780 9065 10160 10160 6620 6990 5385 6880 8115 7110 7135900 3215 3215 3215 3215 8810 8295 9000 8745 8805 9000 8420 7005 6945 9000 9000 6495 6745 6815 8075 6945 6990950 1930 1930 1930 1930 5270 5915 5915 5980 5980 7070 5270 5145 5145 7070 7070 6365 6870 6815 7070 6750 6815

1000 965 965 965 965 3085 3795 3795 4050 4050 4885 3085 3730 3730 4755 6310 6105 6310 6310 6310 6300 63101050 2895 2955 2700 2700 3280 3085 2700 2700 3215 6310 5785 6310 6105 6310 5465 63001100 1800 1800 1800 2055 2055 1865 1865 2120 5655 4820 5720 5305 6045 4180 48851150 1155 1155 1155 1285 1545 1155 1155 1415 4180 3730 4435 4435 5145 3215 35351200 705 705 705 770 835 645 645 965 2700 2895 3470 3470 3215 2445 25701250 2120 2765 2635 2315 1865 19301300 1605 2185 2055 1735 1480 14151350 1155 1800 1605 1285 1095 10951400 900 1415 1220 1030 835 8351450 645 1095 965 770 580 6251500 515 770 705 645 450 480