2.7 Make Your Building Energy Efficient -...
Transcript of 2.7 Make Your Building Energy Efficient -...
![Page 1: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/1.jpg)
2.7 Make Your Building Energy Efficient
Heat, thermal energy and thermal resistance
![Page 2: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/2.jpg)
Kinetic energy of atoms
In solids, liquids and gases, atoms and molecules have “kinetic energy”, which is the energy of motion related to vibration, rotation or movement.
SOLID LIQUID GAS
![Page 3: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/3.jpg)
Kinetic energy of atoms 2
In solids the atoms can only vibrate, but in liquids and gases the atoms also rotate and move.
SOLID LIQUID GAS
![Page 4: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/4.jpg)
Thermal Energy
The thermal energy of a substance is the total amount of kinetic energy due to the motion of its atoms. It also includes the “potential energy” stored in chemical bonds.
![Page 5: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/5.jpg)
Thermal Energy Units
![Page 6: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/6.jpg)
Temperature depends on average kinetic energy
![Page 7: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/7.jpg)
Relation between T and molecular KE
![Page 8: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/8.jpg)
Temperature and Thermal Energy
![Page 9: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/9.jpg)
Mixing Water of Different Temperature
![Page 10: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/10.jpg)
Heat
Heat is the amount of thermal energy that is transferred between two objects because of a temperature difference.
Heat has the same units as thermal energy (Joules in the metric system, British Thermal Units (BTU) in the British system).
An object does not “contain” heat---it contains thermal energy. Heat is the amount of thermal energy transferred.
![Page 11: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/11.jpg)
Thermal Energy Flow
When a hot object is placed in contact with a cool object, thermal energy flows from the hot object to the cool object until their temperatures are the same.
This flow does not depend on the total thermal energy of either object (i.e. which is related to their sizes); it depends only on the difference in their temperatures.
![Page 12: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/12.jpg)
Energy Flow Example
When a hot brick is put contact with a cold brick, the more rapidly vibrating molecules in the hot brick collide and transfer kinetic energy (temperature) to the uppermost molecules in the cold brick, which in turn transfer the KE downward through the cold brick.
![Page 13: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/13.jpg)
Thermal Equilibrium
Energy transfer continues between two objects in contact until they reach the same temperature. When this happens, the amount of energy transferred between the objects is the same in either direction, and the system is in thermal equilibrium. Although the KE of individual particles is still exchanged, the net transfer of KE is zero and the total thermal energy of each object remains the same.
A system is in thermal equilibrium when its temperature is constant and there is no net transfer of thermal energy to it or from it.
![Page 14: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/14.jpg)
Thermal Energy Transfer
In order for an object’s temperature to change, thermal energy must be added or removed.
The three primary ways in which heat is exchanged is by:
• Conduction
• Convection
• Radiation
![Page 15: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/15.jpg)
Conduction
Conduction is the transfer of thermal energy directly through a material by collisions between molecules. Higher energy molecules collide with lower energy molecules, transferring kinetic energy. This is how heat is transferred through solids.
Example: If you hold one end of a metal rod and put the other end into a fire, it will soon start to feel warm. The warmth is conducted along the length of the rod by collisions between particles.
![Page 16: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/16.jpg)
Conduction
If you hold one end of a wooden stick and put the other end into a fire, the far end will likely catch fire before the near end starts to feel warm. Thus conduction depends on the type of material involved. Materials that are good at conducting thermal energy are called thermal conductors, while those that conduct thermal energy poorly are called insulators.
![Page 17: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/17.jpg)
Conductors and Insulators
Metals tend to be good conductors of both thermal energy and electricity because of their freely moving valence electrons which can transfer both.
Non-metals are generally good insulators. Air is a good insulator because gas molecules are far apart.
![Page 18: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/18.jpg)
Example
You get up in the morning and walk barefoot from the bedroom to the bathroom. In the bedroom you walk on carpet, but the bathroom floor is tile. The tile feel colder than the carpet. Why?
Both are at the same temperature. Your feet are warmer than both. Carpet is a better insulator than tile. Less heat flows from your feet to the carpet than to the tile. Thus the tile feels as if it were colder---it makes your feet colder quicker.
![Page 19: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/19.jpg)
Heat Transfer: Conduction
![Page 20: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/20.jpg)
Conduction
![Page 21: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/21.jpg)
R-values
Here, l is the thickness of the material.
![Page 22: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/22.jpg)
R-values
Since R-values already take into account the thickness of the material, they can be added directly. For instance, 4 inches of fiberglass added onto ½” plywood would have R = 12.6.
![Page 23: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/23.jpg)
R-values Note that heat flow through a window or wall will often create a thin “boundary” layer of air on either side of it of similar temperature, which then effectively acts as a further layer of insulation, if the air is still.
However, if there is a strong wind, this extra layer of insulating air is rapidly swept away and replaced by fresh cold air, and heat loss increases. Thus heat exchange across a surface also depends on wind speed, which is related to the process of convection.
![Page 24: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/24.jpg)
Convection
Convection transfers thermal energy by physical movement of molecules from one place to another (translation). This occurs in gases and liquids.
Example: An electric heater’s hot coils warms the air in direct contact by conduction, but then the hot air rises, moves away and warms the whole room by convection. The molecules with high kinetic energy (temperature) move to other locations in the room and mix in.
![Page 25: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/25.jpg)
Convection
Although liquids and gases are generally not good thermal conductors (due to their low number of molecules per volume relative to solids), they can flow and transfer heat rapidly by convection.
Convection may be natural (buoyancy-driven) or forced (advection).
![Page 26: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/26.jpg)
Both figures below are examples of natural convection. The heated fluid undergoes thermal expansion; this increase in volume lowers its density (mass/volume), and it rises due to its buoyancy relative to the surrounding fluid, creating a circulation pattern.
![Page 27: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/27.jpg)
Forced Convection
An example of forced convection is a forced hot-air heating system. These often have a fan that blows the air out of registers (openings), rather than relying completely on natural convection.
Our body temperature is regulated by the blood, which is pumped by the heart, and thus is another example of forced convection.
![Page 28: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/28.jpg)
Radiation
All objects give off energy in the form of radiation. That is, objects emit electromagnetic waves relative to their temperature---infrared waves, and if hot enough, visible and ultraviolet waves. These electromagnetic waves carry energy through space---even through a vacuum---and can be absorbed by and heat a distant object.
Example: The warmth we receive from a fire is mainly radiation. The side of you facing the fire may feel very hot while the side of you facing away remains cold due to the surrounding cold air.
![Page 29: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/29.jpg)
Radiation
The most familiar example of radiation is our own Sun, which has a surface temperature of 6000 K.
As a result of its high temperature, the Sun emits infrared waves,
visible light and ultraviolet light that
travel to and heat the Earth.
![Page 30: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/30.jpg)
Radiation
![Page 31: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/31.jpg)
Angle of the Solar Radiation
![Page 32: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/32.jpg)
Angle of the Solar Radiation
![Page 33: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/33.jpg)
Radiation
On cloudy days, the solar radiation reaching the ground is typically half that of sunny days.
White or shiny (reflective) objects are not good at emitting or absorbing electromagnetic waves, while dark (non-reflective) objects are both good absorbers and good emitters.
![Page 34: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/34.jpg)
Seeing Temperature
![Page 35: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/35.jpg)
Thermal Imagery
Images of infrared radiation flux are
useful in many engineering applications.
![Page 36: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/36.jpg)
Combined Heat Transfers
In most situations, two or all three types of heat transfer occur simultaneously.
Our blood carries heat by convection. Once it reaches the surface of the skin, the heat is released through evaporation, radiation and convection of the surrounding air.
The sun heats a car by radiation. Heat spreads through the solid parts of the car by conduction, and into the air inside and outside of the car by convection.
![Page 37: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/37.jpg)
Thermal Equilibrium
Despite whether heat is transferred by conduction, convection or radiation, once the objects involved reach the same temperature, the net transfer of heat between the objects will be zero.
![Page 38: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/38.jpg)
Heat and Phase Change
An input of thermal energy (heat) is required to change a solid to a liquid, and a liquid to a gas.
SOLID LIQUID GAS
![Page 39: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/39.jpg)
Hexagonal Structure of Ice
In this figure, oxygen atoms are red, and hydrogen atoms are blue.
![Page 40: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/40.jpg)
Changing from one phase to another requires heat
![Page 41: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/41.jpg)
Evaporation cools your skin
Consider a droplet of sweat on the skin. The highest-energy molecules escape from the liquid, such that the mean KE of the remaining liquid drops. As the temperature of the sweat become lower than that of the skin, it conducts heat from the skin, cooling the body.
![Page 42: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/42.jpg)
Evaporation keeps you cool
This heat flow from the skin to the cooled sweat increases the mean KE of the liquid, allowing more evaporation to occur, and continues the flow of thermal energy and cooling of the body.
Thus sweating is an effective means of drawing thermal energy from the body and shooting it off into the surrounding air in the form of high-speed water molecules.
Humid air reduces the rate of evaporation---and hence cooling by sweating is less effective then.
![Page 43: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/43.jpg)
Extreme evaporation
Although the body temperature (average KE) of this athlete is below the boiling point, his warm sweat readily evaporates into the cool, dry air. Note that water vapor is invisible; the “steam” in this photo is water that has cooled and condensed back into the liquid state.
![Page 44: 2.7 Make Your Building Energy Efficient - Weeblydrlaurenceanderson.weebly.com/uploads/3/8/5/4/... · 2.7 Make Your Building Energy Efficient Heat, thermal energy and thermal resistance](https://reader034.fdocuments.in/reader034/viewer/2022042103/5e7fe9ca9e1e14143049f8e6/html5/thumbnails/44.jpg)
Refrigerators and Air Conditioners
Refrigerators and air conditioners use latent heat to transport heat. An alternating air compressor puts a special liquid (formerly CFCs) under low pressure so that it evaporates to a gas. In doing so it absorbs heat inside the refrigerator. The gas is then pumped through coils outside the refrigerator and put under high pressure so that it condenses back to a liquid. When it does so, it releases the heat. It is then pumped back into the refrigerator and the process repeated.