26 Contacts 26-polige Signal Circular Connectors ...
Transcript of 26 Contacts 26-polige Signal Circular Connectors ...
40A 41A
26-poligeSignalsteckverbinder26 ContactsSignal Circular Connectors
43A
43A
A S T A 3 8 4 M R 0 4 5 5 0 0 1 K 0 0 0
Ordering information 26 CONTACTS signal circular connectors
HOUSING DESIGN
ST = PlugKU = ExtensionEG = Receptacle, straight
SERIESA = Signal connectors 26 contacts versions
STANDARDHOUSING SURFACE
A = Nickel plated
INSULATION INSERTS
Component related code,e.g. 384
CONTACT, CONNECTION
M R
CONTACT TYPE
Component related code,e.g. 04
CABLE CLAMPING
Cable diameter related code,e.g. 55
DESIGN VARIATIONS
See table page A49
PACKAGING
Standard packaging code: 000
All standard connectors are published in this catalog. However, this catalog does not provide customer specifi cdesigns or variations.
If you are looking for an application optimized solution, don´t hesitate to contact us.
Any questions? Please call our technical sales staff – phone +49 (0)9962 20020.
26 contacts signal connectors
1st. letterM = Male contactF = Female contact
2nd. letterR = CrimpingS = Soldering
44A 45A
A A x x x x x x x x x x x x x 0 0 0
S T
K U
E G
Housing designs
AVAILABLE HOUSING SURFACES FOR 26 CONTACTS VERSIONS:
A = Nickel plated
Plug housing
If necessary, distance hulls for insula-tion inserts are automatically supplied with the connectors
Extension housing including vibration protection
Receptacle, straight with integrated fl ange
Axial sealing, including vibration protection
26 contacts signal connectors
Note: Please add the corresponding code to the ordering information
44A 45A
8 53
A A x x x x x x x x x x 0 0 0
8 43
E type, 26 contactsP type, 26 contacts
Insulation inserts26 contacts
signal connectors
Coding groove
Suitable for housing design
PLUG EXTENSION RECEPTACLE
Note for RECEPTACLES: Versions – sealed to IP67 in unplugged condition – on request (male contacts only!)
Coding groove
46A 47A
A A x x x x x x 0 0 0
RF 0 1 SF 0 4
RF 1 1 SF 1 3
Female type contacts26 contacts
signal connectors
HC crimping female contact 1,0mmCrimping range: max. 1,0mm2
HC soldering female contact 1,0mmSoldering connection: 1,5mm2
Slit crimping female contact 1,0mmCrimping range: max. 1,0mm2
Slit soldering female contact 1,0mmSoldering connection: 1,5mm2
Please select the corresponding code, e.g. FR 01
Suitable for all housing designs and insulation inserts
46A 47A
A A x x x x x x 0 0 0
RM 0 4
RM 8 3
SM 0 6
Male type contacts26 contacts
signal connectors
Crimping male contact 1,0mmCrimping range: max. 1,0mm2
Soldering male contact 1,0mmSoldering connection: 1,5mm2
Crimping male contact 1,0mmCrimping range: max. 0,2mm2
Suitable for all housing designs and insulation inserts
48A 49A
A A x x x x 0 0 0
0 8
5 5
5 8
5 9
Clamping unit including seal with strain relief
Clamping ring
STANDARD clampingClamping unit including seal with strain relief, shielding element, clamping ring
Please select the corresponding ordering code.For all receptacles housing designs add „00“
Advanced LAMELLA clamping„Jagged“ clamping unit for improved revolving protection (incl. seal and strain relief), shielding element, clamping ring
Shielding element
Clamping ring
Cable clamping26 contacts
signal connectors
Standard cable clamping
Suitable for cable diameter:9,0 – 14,0mm
Lamella type cable clamping
Suitable for cable diameter: 7,5 – 12,0mm
Lamella type cable clamping
Suitable for cable diameter: 9,5 – 14,5mm
Lamella type cable clamping
Suitable for cable diameter: 14,0 – 17,0mm
Suitable for housing design
PLUG EXTENSION
Clamping unit (revolving protection,seal and strain relief)
Shielding element
48A 49A
A A 0 0 0
0 10 K
3 50 K
0 20 K
Design variations26 contacts
signal connectors
ORDERING CODE SPECIFICATIONSPICTURE AND CODING
Code 1 – Housing code 0° Metal construction
Code 1 – Housing code 0°
Metal construction Vibration protection
Code 1 – Housing code 0°
Axial sealing Vibration protection
Customer specifi c options on request
PLUG
EXTENSION
RECEPTACLE
ORDERING CODE SPECIFICATIONSPICTURE AND CODING
ORDERING CODE SPECIFICATIONSPICTURE AND CODING
Note for RECEPTACLES: Versions – sealed to IP67 in unplugged condition – on request (male contacts only!)
50A 51A
TECHNICAL DATA FOR 26 CONTACTS SIGNAL CONNECTORSOperating temperature -20°C to 130°C
Degree of protection IP 66/67 (plugged condition)
ELECTRICAL DATAMax. current(max. wire gauge) max. 9 A
Max. voltage 60 V (AC/DC)
Test voltage (between contacts) 2000 V
Contact resistance < 5 mΩ
Mating cycles > 50
DATA ACCORDING TO VDE 0110/0627, PART 5.19.2.1Pollution degree 3
Overvoltage category III
Max. operating height 2000 m
MATERIALSHousing Zinc die cast / brass
Housing surface Nickel plated
Connecting nut (some designs) Brass, nickel plated
Insulation inserts PA 6.6/ PBT, UL 94/ V0
Contacts Brass, gold plated
Seals FPM/HNBR
Technical data26 contacts
signal connectors
50A 51A
Drawings26 contacts
signal connectors
PLUGDesign variation 001K
EMC shieldingHousing code: Code 1
EXTENSIONDesign variation 035K
EMC shieldingVibration protectionHousing code: Code 1
52A 53A
30
30 3,2
23,2
23,2
23,2 0,2
M3
23.2
23,2
Drawings26 contacts
signal connectors
30
Flange dimensions Mounting holes
RECEPTACLE STRAIGHT, INTEGRATED FLANGEDesign variation 002K
Axial sealingVibration protectionHousing code: Code 1
52A 53A
Accessories26 contacts
signal connectors
Metal fl ange2 components, 4x M4 thread,
for optional clamping onto metal housings, including sealing ring
Ordering No.E0.015.00
78A 79A
A 0 0 0
Packaging A SERIES
Standard packaging code: 000
Standard packaging for connectors or connector components: cardboard box (various sizes depending on units packed).
Customer specifi c packaging designs including mounting instructions, e. g. service packs, on request (see picture).
Intercontec Produkt GmbH
Bernrieder Strasse 15
D-94559 Niederwinkling
Tel. +49 (0)9962 - 2002-0
Fax +49 (0)9962 - 200270
Email: [email protected]
http://www.intercontec.biz
© 2002-2003 INTERCONTEC
Technical data may differ or change without notice
INTERCONTEC is not responsibility for data misprints
PDF fi le generated 01/2003
desi
gn: w
ww
.kat
hede
r.com