25pcCOOLING SYSTEM PRESSURE TEST KITS EOBD DIAGNOSTIC TOOLS Vehicle Service... · Promotion Code:...

1Prices exclude VAT unless stated otherwisePromotion Code: VST12.09

Promotion Valid from 1st September to 31st December 2012

NEW

NEW

EOBD DIAGNOSTICTOOLS

25pc COOLING SYSTEMPRESSURE TEST KITS

• 3 New Models.• Colour

screens.• I/M Readiness

indicator.

•Features 5 new adaptors for increased vehicleapplications.

•Fast and effective wayof finding coolant leaks.

From £49.95+VATSee page 2

£199.95+VATSee page 16

From £99.95+VATSee page 3

FEATURE PACKEDBORESCOPES

NEW

• Big screens.• Rewind and playback.• Integral memory.• Ø5.5mm - Ø8.5mm

probes.

5.5mm

2 Prices exclude VAT unless stated otherwise Promotion Code: VST12.09

EOBD Code Readerwith Live Data

EOBD Code Reader -Memory & Graphics

EOBD Code Readers Patented One-Click I/M ReadinessCheck

EOBD Code Reader

EOBD Code Reader Features VS8800 VS8801 VS8802

Works with all 1996 and later OBDII / EOBD compliant vehicles

� � �

Scans for Diagnostic Trouble Codes (DTC) - The cause of the 'Engine Malfunction Indicator Light' (MIL)

� � �

Scans for pending DTCs � � �

Retrieves generic (P0, P2, P3 & U10) and manufacturer specific (P1, P3 & U1) DTCs

� � �

Turns off MIL light, clears DTCs and resets monitors � � �

Displays DTC definitions on screen � �

View freeze frame data � �

Displays monitor and I/M readiness status (emissions) � � �

Patented One-Click I/M Readiness button (emissions) � �

Retrieves vehicle information (VIN, CID & CVN) � � �

Supports CAN and other current EOBD Protocols � � �

Supports the new extended sensor list (SAE J1979 - 2007) �

Reads live ECU/PCM data stream � �

Displays live O2 sensor data � �

Graphing function for live data (96on) �

Read, store and playback live sensor data �

Performs 'modules present' test � �

Print out data via PC �

Update software via the internet � �

Built-in EOBD library lookup �

Diagnostic trouble tips and repair information guide �

Large, easy-to-read LCD display � � �

Backlit screen � � �

Easy-to-use � � �

A faulty component monitored by EOBD does not always turn on the MIL light on the dash board straight away. The vehicle has to run through a drive cycle to pend, then confirm DT Cs, before then turning on the MIL light. Sealey ’s VS8801 and VS8802 have a new feature which, using only one click of a button , can tell the technician which groups of sensors are ready for diagnosis andhave gone through the drive cycle. F or Pre MOT work this is vital and enables the technician toconfirm that the MIL light will not come back on duringthe MOT, creating a fail.

Save time and money, plus take the guess work out of fault finding anddiagnosis with CAN enabled EOBD diagnostic tools. Interrogate your vehicle’s engine and emission faults with our updated range of toolswhich reads and clears both pending and confirmed Diagnostic TroubleCodes (DTC’s). The VS8800 is a new entry level tool which will display onlythe DTC number – the description can be looked up on the CD supplied.The VS8801 and VS8802 feature full colour screens and patented one-click I/M readiness function. Both the larger units will read live datadirect from the vehicles ECU and the VS8802 will allow you to graph thedata enabling fast interpretation of engine per formance. In the eventthat the software requires updating or the EOBD protocols are updated,the VS8801 and VS8802 may be updated using a USB inter face. The results from the VS8802 may be saved out to PC for sharing.

The VS8802 is also loaded with a Tech-Tips data base allowing you a morerounded description of the DTC fault and some ideas about where to looknext to correct the fault – lik e having a professional technician on call24/7.

See the table below for a full list of features and vehicle coverage.

• Model No.VS8801• List Price £95.95

• Model No.VS8802• List Price £199.95

• Model No. VS8800

• List Price £64.95

inc VAT

exc VAT£69.95£83.94

OFFER PRICE

inc VAT

exc VAT£149.95£179.94

OFFER PRICE

inc VAT

exc VAT£49.95£59.94

OFFER PRICE

Tech Tips

Watch live data on the VS8801 and the VS8802. VS8802 will additionallyallow selected data to be graphed.

Diagnostic guidance and tips in the palm of your hand.

NEWNEWNEW

ColourColour


inc VAT

exc VAT£99.95£119.94

OFFER PRICE

VS8

221

VS8

220

Proscope

Proscope1 Proscope2

Second GenerationBorescopes

NEW

128mb

DigitalProbe SD

Brightness Zoom Colour Video Playback

Video Camera InternalMemory

USBConnection

AV Out

Brightness Colour

Camera AV Out

DigitalCamera

StorageNot Included

• Ideal for the professional tradesman and technician.• High performance pistol grip borescope with 60mm

colour TFT screen.• Ø8.5mm Digital output camera module ensures low-loss

transmission of images to the hand-set and gives greatimage quality with excellent colour balance and contrast.

• Supplied with an AV-out cable and USB cable to allow connection to a PC to capture, store and share imagesand video.

• Kit includes a 45° mirror, hook and magnetic pick-upattachment. Powered by 4 x AA batteries.

• Model No. VS8220• List Price £189.95

• 128Mb Integral memory allows the storage of up to 80 images or 90sec of video on the handset – use a Micro SD card (not included) in the expansion slot to increase your storage capacity if required.

• Record and replay still and video images on the handset or stream live video via

the USB/AV connection.• Features digital zoom control and rotate/flip control of the image – ideal for

use in a tight spot or with a mirror.• Pistol-grip style is perfect for trade use.

• Versatile video borescope with Ø8.5mm x 1000mm semi-rigid probe.• Quickest and most cost effective solution, ideal for the inspection of

engines, machinery, buildings and infrastructure.• Image displayed on a crystal clear, 60mm high resolution colour LCD

display with on-screen horizontal/vertical flip features for use with side-view mirrors.

• CMOS camera with adjustable LED for fine control of light output and clear pictures.

• Suitable for internal inspection of cylinder head bores and vehicle compartments/components.

• Supplied with AV cable for external viewing of image.• Uses 4 x AA batteries supplied.• Model No. VS8196 • List Price £224.95

• High performance pistol grip bore scope with89mm colour TFT screen.

• Ø5.5mm Digital output camera module ensures low-loss transmission of images to the hand-set.

• Camera capsule is waterproof to 3mtr and has scratch resistant, tempered glass lens.

• Powered by lithium-ion battery pack giving up to 4 hours continuous use.

• Supplied with an AV-out cable and USB cable to allow connection to a PC to capture, store andshare images and video.

• Kit includes a 45° mirror, magnetic pick-up attachment and mains charger.


Still the best qualityScope for the money

inc VAT

exc VAT£139.95£167.94

OFFER PRICE

inc VAT

exc VAT£199.95£239.94

OFFER PRICE

VS8

196

Simple to use oscilloscope that allows obser vation ofconstantly varying signals from vehicle components andsensors. With a bandwidth of 20MHz the unit is suitable fordetecting CAN signals on modern vehicles. Functions includedate hold, record, auto -ranging and USB inter face fordownloading data to PC. This versatile unit also has a built inmultimeter with large digit display and bar graph. Suppliedwith 3-pin UK and 2-pin European charger leads.

Display: 320 x 240 pixel with LED BacklightBandwidth: 20MHzSample Rate: Maximum 80MSa/SInput Impedance: 1MΩMaximum Input: 600VMemory Capacity: 6 WaveformsTrigger Mode: Auto, Nor-mal, SingleMultimeter Modes: Voltage DC & AC, Current DC & AC, Resistance,Capacitance, Continuity, DiodeBattery: 3.7V Lithium PolymerOperating Time: 3hr with BacklightSize: 211 x 140 x 55mmWeight: 700gPC Compatibility:Windows 98, ME, 2000, XP, Win7, Vista


inc VAT

exc VAT£899.95£1079.94

OFFER PRICE

FREEEOBD CodeReader withLive Data• Model No.

VS8801• List Price

£95.95

Hand-Held Automotive Single Channel Oscilloscope & Multimeter

Accessories (supplied): Power Supply Lead, Power SupplyPlug Adaptors x 4, Cigar Lighter Power Lead,USB Cable, Attenuators x 4, Calibration Probe, Crocodile Clips; 4 x Red,4 x Black, Standard Probes; 4 x Red, 4 x Black,Back Probesx 5, HT Coil On Plug Extension Leads x 4, HT Couplers x 4,Standard Leads x 4, Earth Cables x 4, Software Disc (Driver & Instructions)Maximum Sample Rate: 200MS/s (Single Channel), 100MS/s(Dual Channels)Bandwidth: 60MHz (-3dB)Gain Range: 10mV - 5V/div @ x1Probe (10mV, 20mV, 50mV,100mV, 200mV, 500mV, 1V, 2V, 5V/div 1,2,5 sequence)100mV - 50V/div @ x10 Probe1V - 500V/div @ x100 Probe10V - 5KV/div @ x1000 ProbeCoupling: AC, DC, GNDImpedance: 1MΩDC Accuracy:+/-3%Input Protection: 35Vpk (DC + Peak AC < 10 kHz, withoutexternal attenuation)Display Mode: Y-T, X-YPredicted Waveforms: 81Timebase Range: 5ns/div - 1000s/div (1-2-5 sequence)Acquisition Mode: Realtime Sampling: 5ns/div - 200ms/divRoll Mode: 500ms/div - 1000s/divBuffer Size: 10K - 16M Points (Single Channel)Type: Edge Trigger, Pulse TriggerMode: Auto, Normal, SingleAutoset: 4Trigger Level: +/-4 DivisionsMeasurements: Vpp, Vmax, Vmin, Vmean, Vrms, Vamp,Vtop, Vbase, Vmid, Positive Overshoot, Negative Overshoot, Cycle Mean, Cycle RMS, Period, Frequency,Positive Pulse Width, Negative Pulse Width, Rise Time (10%-90%), Fall Time (10%-90%), Positive Duty Cycle, Negative Duty CycleMath: Addition, Subtraction, Multiplication, FFT FFT: Rectangular, Hanning, Hamming, Blackman Window Interface: USB2.0 (USB1.1 compatible)Operating System: Window NT, 2000, XP, VISTA, Win7Power: 8.5V DCSize (L x W x D): 224 x 168 x 37mm

One of the most competitively priced, PC -based scopes around and suitable for professional applications. High sample rate, multiple memor y function and 4-channel display make this unit ideal for in-depth analysis of a variety of automotive sensors and components and can be used with any compatible lap-top or PC. The scope also features a comprehensive collectionof standard automotive diagnostic procedures, turning an other wise complexprocess into a click of a button. The system is loaded with specimen waveformsallowing the operator to compare actual results with those expected. The 4-channel function allows multiple components to be compared simultaneously.The TA4000 Can be connected using a LAN cable (supplied) to any PC runningthe appropriate software version. The scope is supplied with a wide selection ofautomotive type test leads, connectors and probes. Supplied in carr y-case.

Automotive Diagnostic Oscilloscope 4 Channel

Visit www.sealey.co.uk for FREE software

Download and Demonstration Video. Try the Software Mode

before you buy.

FREEEOBD CodeReader withLive Data• Model No.


£95.95

inc VAT

exc VAT£549.95£659.94

OFFER PRICE

• Model No. TA4000• List Price £1295.95



Vacuum Tester andBrake Bleeding Kit

• Kit includes reservoir, hoses and adaptors for bleeding brake and clutch systemson cars, commercials and motorcycles.

• Model No: VS4022• List Price £79.95

Vacuum Tester & BrakeBleeding Kit

Lambda Sensor Tester/Simulator

FREEMini Digital

Thermometer• Model No. VS906• List Price £17.95

NEW

Relay Circuit DiagnosticTester

• Fast, accurate and safe relay circuit tester that tests the supply, earth and trigger wires within the automotive circuit.

• Simply remove the relay and install the corresponding dummy relay.

• Includes a universal fly lead for non standard relay pin configurations.

• Earth, supply and trigger terminals are displayed as green or red LEDs.

• The tester can also be used to powercomponents by simulating the relay in the on/off positions using the test button.


• Features a scope function to visuallytest component signals, with the addedbenefit of maximum/minimum volts, frequency and duty cycle displayed.

• Allows components to be activated in situ or prior to installation.

• The fly lead allows continuity andpolarity testing with a high-contrast colour LCD display giving a 7mmhigh read-out.

• Feature audible and positive/negative voltage indicator and two integral work lights.

• 6mtr Lead connects to the battery supply and reaches to all areas of the vehicle. Includes a cigarettelighter adaptor.

• Model No. PP100• List Price £149.95

0-30V Power ScopeAutomotive Probe

FREECurrent Tester 20A -Standard Fuse• Model No.

TA120• List Price

£21.95

NEW

Infrared Laser DigitalThermometer 12:1

FREE• Model No.

MM20• List Price

£29.95

8 Function Digital Multimeter with Thermocouple

• Features laser pointer, Maximum/Minimum/Average/Differencereadings, data storage and data hold function, high/low alarm setup, auto power off.

• Temperature is displayed on a large 29mm LCD panel with back-lit display for use in low light areas and can be shownin either °C or °F.

• Powered by 9V cell (supplied).• Model No. VS907• List Price £99.95

• Tests Zirconia and Titania lambda sensors and ECU.• Suitable for 1, 2, 3 and 4 wire sensors, heated

and unheated.• LED display shows crossover signal from sensor.• Simulates rich or lean mixture signals to check

ECU response.• Insulation-piercing clip for quick and easy

connection plus, display to confirm wire identity.• Features a low battery indicator and powered

by 9V battery (supplied).• Model No. VS925• List Price £99.95

• Multi-function diagnostic tool used to test a variety of essential engine and associated functions including fuel, ignition, transmission and emissions.

• Brass-bodied vacuum pump features large, easy-to-read vacuum gauge calibrated in both inches and millimetres of mercury.


NEW

inc VAT

exc VAT£129.95£155.94

OFFER PRICE

inc VAT

exc VAT£119.95£143.94

OFFER PRICE

inc VAT

exc VAT£64.95£77.94

OFFER PRICE

inc VAT

exc VAT£34.95£41.94

OFFER PRICE

inc VAT

exc VAT£69.95£83.94

OFFER PRICE

inc VAT

exc VAT£44.95£53.94

OFFER PRICE

ARRIVING OCTOBER


12V LED Battery/AlternatorTester with Crocodile Clips• LED Indicators verify condition

of battery and alternator.• Magnetic backing sticks

to metal surfaces forhands-free operation.

• Model No. AK400• List Price £16.95

inc VAT

exc VAT£10.95£13.14

OFFER PRICE

inc VAT

exc VAT£119.95£143.94

OFFER PRICE

12V Battery Drop Tester

• Traditionally styled drop tester for all 12V automotive batteries.

• Applies load across cells and measures output on meter.

• Accurate indication of battery voltage, faulty cell and short circuited cell.

• Model No. BT91/3• List Price £162.95

inc VAT

exc VAT£44.95£53.94

OFFER PRICE

6/12V BatteryDrop Tester

• American style drop tester.• Load applied by internal switchgear - no sparking!• Suitable for 6 and 12V batteries.• Applies load across cells and measures output on meter.• Accurate indication of battery voltage, faulty cell and

short circuited cell.• Model No. BT91/7• List Price £59.95

inc VAT

exc VAT£34.95£41.94

OFFER PRICE

12 Function Digital AutomotiveAnalyser

• Durable bi-composite case and integral standsuitable for the toughest workshop conditions.

• Large, hi-contrast LCD display with 18mm high digital read-out and bar graph.

• Auto-ranging, data-hold, auto-polarity, auto-power-off and low battery display functions.

• Bar graph simplifies lambda sensor testing.

• Supplied with cappedtest probes and K-type thermocouple.


14 Function Digital AutomotiveAnalyser with Inductive Coupler

8 Function Digital AutomotiveAnalyser

inc VAT

exc VAT£39.95£47.94

OFFER PRICE

inc VAT

exc VAT£69.95£83.94

OFFER PRICE

• Durable bi-composite case and integral stand suitable for the toughest workshop conditions.

• Large, hi-contrast LCD display with 21mm high digital read-out.

• Unique Test Lead Connection feature.• Includes data hold feature

and low battery display.• Supplied with test probes

and crocodile clips.• Model No. TA200• List Price £59.95

• Integrated circuit, high visibility, backlit, LCD displayand five position stand.

• Fourteen functions including pulse-width measurement for fuel injectors, idle air control motors and electronic transmission control systems.

• Auto-ranging and auto-power-off.• Suitable for AC and DC circuits.• Supplied with test leads, inductive coupler with

adjustable sensitivity, K type temperature probe and operating instructions.


6pc Noid Light Set

inc VAT

exc VAT£13.45£16.14

OFFER PRICE

inc VAT

exc VAT£3.95£4.74

OFFER PRICE

• Check fuel injector signal faults fast.• Easy-to-use and fits a wide variety

of injector harnesses.• Applications: GM PFI, Ford

TBI, GEO TBI, Bosch PFI, GM TBI, GM SCPI.


Dial Type Battery Fluid Tester

• Tests 6, 12 and 24V batteries.• Composite body and rubber

bulb for workshop durability.• Model No. AK410• List Price £6.45


90pc Test Lead Kit

Diagnostic SocketMemory SafeEOBD 12V

Digital Automotive Analyser12 Function with IC

6 Function Professional Auto-RangingDigital Clamp Meter NCVD

• Conforms to EN 61010-1 CATIII 600V safety requirements for electrical equipment for measurement, control and laboratory use.

• Features non-contact AC voltage detectionfunction while controls are laid out to enableuse with one hand.

• Includes data and max hold functions.• Double moulded housing with soft grip case

and large display for ease of use.• Supplied in zipped pouch with carry strap.• Model No. TM105• List Price £69.95

• Reads standard automotive parameters including duty cycle.

• Features auto-ranging and data hold functions with overload protection on all ranges.


FREECompression TesterPush-On Type with

Straight Stem• Model No. CT954• List Price £20.45

FREEDiagnostic Socket

Memory Safe - EOBD• Model No. VS2072• List Price £29.95

• Used to preserve the memory to on-board electronics whilstvehicle's own battery is disconnected.

• Can be connected via the vehicle's EOBD or cigarette lighter socket.

• Unit features an internal 12V 4Amp sealed battery and LEDsprovide battery condition andcharge indicator.

• Supplied with mains charger.• Model No.VS2071• List Price £129.95

NEW

inc VAT

exc VAT£64.95£77.94

OFFER PRICE

inc VAT

exc VAT£289.95£347.94

OFFER PRICE

inc VAT

exc VAT£86.95£104.34

OFFER PRICE

inc VAT

exc VAT£69.95£83.94

OFFER PRICE

9 Function WorkshopVolt/Amp Meter 6-24V

12V Digital Battery& Alternator Tester

Digital Battery Tester with Printer 6/12V

inc VAT

exc VAT£169.95£203.94

OFFER PRICE

inc VAT

exc VAT£49.95£59.94

OFFER PRICE

inc VAT

exc VAT£64.95£77.94

OFFER PRICE

• Utilises low current draw technology to evaluate condition of SLI, VRLA, AGM and Gel batteries.

• Suitable also for the evaluation of the alternator and chargingcircuitry of the vehicle - the resultsdisplayed simply and clearly onthe LED panel.

• Model No. BT102• List Price £89.95

FREE12 & 42V Hybrid Vehicle

Circuit Tester• Model No. AK4010• List Price £25.95

• Comprehensive set of test leads and components suitable for testing, isolating and evaluating automotive electronic circuits.

• Kit includes standard Ø4mm banana style plugs and sockets suitable for use with most diagnostic multimetersand test equipment.

• Supplied in sectioned carry-case for quick location of components.


FREE6-24V Circuit Tester


• Fast, accurate diagnosis and recording of battery faults.

• LCD Screen shows easy-to-follow test prompts and results.

• Integral printer will produce hard-copyresults for your own or customer’s records.

• Suitable for Regular Liquid, AGM Flat Plate,AGM Spiral and Gel batteries.

• Supplied with carry-case, two printer rolls and instruction manual.

• Model No. BT2013• List Price £399.95

• Reads up to 32V/100Amps.• Tests battery voltage, feed voltage,

earth contact, alternator current, equalization, alternator drop, electric system and rundown current.

• Steel case with carry strap.• 2 Large meter read-out display.• Supplied with two pairs of leads with crocodile clips

and full operating instructions.• Model No. BT91/5• List Price £99.95

ARRIVING OCTOBER


399pc Crimping Tool SetAutomotive Test Probe

Automatic WireStripping Tool

• One-handed, compound action pliers grip and strip electric cables from 0.5mm2 up to 5.5mm2 automatically.

• Jaw action prevents crushing or cutting even the finest wires.

• Supplied with length gauge and fitted with vinyl grips.• Model No. AK2252• List Price £18.95

Ratchet Crimping Tool -Insulated Terminals

• All steel construction with large comfort grip handles and hardened and tempered jaws.

• Ratchet action ensures consistent crimping.• Terminal Suitability: 0.5-1.0mm2, 1.5-2.5mm2,

4.0-6.0mm2.• Model No. AK3864• List Price £42.95

inc VAT

exc VAT£34.95£41.94

OFFER PRICE

inc VAT

exc VAT£11.95£14.34

OFFER PRICE

inc VAT

exc VAT£49.95£59.94

OFFER PRICE

inc VAT

exc VAT£35.95£43.14

OFFER PRICE• Comprehensive crimping tool

and accessory set, including 5-function crimping tool with soft rubber grips for comfort and control.


inc VAT

exc VAT£22.95£27.54

OFFER PRICE

inc VAT

exc VAT£27.95£33.54

OFFER PRICE

FREEAutomotive Test Probe• Model No. VS906• List Price £17.95

• Checks for short circuits and bad earths quickly and easily.

• Tests continuity and polarity using flying lead and also indicates voltage (2V to 24V) of system ontest using an LED array.

• Power-up components prior to installation and check in situ function of components and accessories allowing fastproblem diagnosis.

• Features integral work lightwith touch sensitive control.

• Model No. PPVT• List Price £59.95

13-Pin Towing Socket Tester12V - VOSA Approved

Car Fuse Adaptor Lead Sets

• Ideal for use on car and commercialvehicles.

• Fitted with regular Ø4mm banana adaptors found on most scopes and multimeters.

• Maximum Current/Voltage: 20A/48V.

Model No. Range Fuse Type List Price Exc. VAT Inc. VAT

TA120 0-20A - 0-48V Standard £21.95 £12.95 £15.54

TA121 0-20A - 0-48V Mini £21.95 £12.95 £15.54

20A Current Testers

• Ideal for fault-finding on car and commercial vehicle electrical circuits. • Plugs straight into the vehicle's fuse board.

Model No. TA120

Model No. TA121

Model No. Fuse Type List Price Exc. VAT Inc. VAT

TA123 Standard £12.95 £7.95 £9.54TA124 Mini £12.95 £7.95 £9.54

Model No. TA123

Model No. TA124

Coil On Plug Test Extension

• Allows for inductive couplers to be used on engines that have no HT leads to diagnose engine faults.

• Ideal for coil-pack diagnostics on modern engines.• Enables the technician to correctly diagnose a fault

without unnecessary component changing.• Simply plugs in-between the coil-pack and spark plug.• Model No. VS5263• List Price £34.95

FREEWire Piercing Guide Clip


• Quick and simple test of 12V 13-pin Euro-type sockets fitted to the rear of the vehicle.

• Features self-test facility to ensure the serviceability of the tool.

• Also tests the 12V continuous live feed, 12V ignition live feed and the reversing lights - not part of the current MOT test, but useful when diagnosing electrical faults.

• Includes 13 to 7 pin adaptor for testingolder wiring systems.

• Model No. TST22• List Price £99.95

• Enables the testing of injectors under pressure.

• Fitted with Ø88mm gauge with rubber bumper reading both psi and Bar.

• Ideal for checking of atomisationpattern and opening pressure.

• Transparent reservoir fitted with fine filter and unit supplied with two injector connection pipes.



Diesel Injection SystemPriming Device

inc VAT

exc VAT£1145.95£1375.14

OFFER PRICE

inc VAT

exc VAT£10.95£13.14

OFFER PRICE

Fuel Injection Pressure Test Kit• Comprehensive kit of hoses, adaptors

and fittings for testing the pressure on modern petrol fuel injection systems.

• Fitted with quick couplings and safety valve to prevent inadvertent dischargeof fuel under pressure.

• Supplied with Ø92mm single high pressure gauge with rubber bumper, reading 0-120psi and 0-8bar.

• Gauge features a hanging hook and suction cup.

• Pressure release valve fitted with long drain hose allows safe recovery of fuel.

• Model No. VSE212• List Price £399.95

inc VAT

exc VAT

OFFER PRICE

£347.94£289.95

Diesel Injection Leak Back MasterKit - Bosch/Delphi/Denso

FREE8 Function Digital Multimeter with Thermocouple

• Model No. MM20


inc VAT

exc VAT£199.95£239.94

OFFER PRICE

inc VAT

exc VAT£9.95£11.94

OFFER PRICE

inc VAT

exc VAT£14.75£17.70

OFFER PRICE

inc VAT

exc VAT£99.95£119.94

OFFER PRICE

Injector Nozzle Tester - Diesel

Fuel FeedPipe Pliers

• Suitable for releasingconnections on in-linefuel line filters.

• Fitted with long handlefor restricted access.


Fuel Filter CapRemoval Tool

• Specialist socket required for the removal of diesel fuel filter fitted to 2.0, 2.2 HDi engines found in some Citroen, Ford, Land Rover, Mitsubishi andVolvo vehicles.


90ltr Stainless SteelFuel Tank Drainer

• Stainless steel fuel drainer with venturi type suction.

• 90ltr Capacity tank suitable for petrol or diesel.

• Supplied with suction tubes and adaptors for breaking into vehicle fuel system.

• CE Certified (971231EC).• Model No. TP201• List Price £1649.95

FREE6kg Dry Powder Fire Extinguisher

• Model No. SDPE06


inc VAT

exc VAT£19.95£23.94

OFFER PRICE

• Popular glow plug sized 3/8"Sq drive Chrome Vanadiumsteel sockets with universal joints for simple replacement.

• Features rubber inserts forretention of plug in socket.

• Socket Sizes: 8, 10, 12mm.• Set includes 75mm

extension bar.• Model No. SX0402• List Price £31.95

• Essential for reintroduction of fuel into fuel pumpfollowing maintenance such as fitting of new diesel filter or following drainage of fuel tank.

• Must be used whenever fuel system is disturbed.


4pc 3/8"Sq Drive Diesel Glow Plug Socket Set

• Identifies worn, blocked or inoperative injectors quickly and easily.

• Contains measurement tubes for short term tests and measurement bottles for long term, more accurate evaluation.

• Master kit includes range of adaptors to suit Bosch, Delphi & Denso injectors for comprehensive coverage of common rail diesel vehicles.

• Model No. VS2048 • List Price £179.95

NEW

Diesel & Petrol FuelPump Priming Tool

inc VAT

exc VAT£9.95£11.94

OFFER PRICE

• Required for priming injection pump.• Use after diesel filter change, drainage of fuel

tank or any other disturbance of the fuel system.• Supplied with two fuel

pipe clips.• Suitable for 9mm bore

hose.• Model No. VSE055• List Price £15.95

FREE6pc Petrol Engine

Compression TesterDeluxe Kit

• Model No. VSE300D• List Price

£124.95


HGV Injector NozzleSocket - Diesel

6pc Diesel InjectorSeat Cleaner Set

14pc Diesel InjectorPuller Set

inc VAT

exc VAT£119.95£143.94

OFFER PRICE

inc VAT

exc VAT£49.95£59.94

OFFER PRICE

inc VAT

exc VAT£19.95£23.94

OFFER PRICE

inc VAT

exc VAT£99.95£119.94

OFFER PRICE

inc VAT

exc VAT£26.95£32.34

OFFER PRICE

inc VAT

exc VAT£84.95£101.94

OFFER PRICE

inc VAT

exc VAT£149.95£179.94

OFFER PRICE

• Suitable for the fast and safe removal of Bosch, Delphi, Denso and Siemens diesel injectors.

• Ball joint allows hammer to be used in confined areas.

• Set includes keys and deep open profile sockets, used to dismantle injectors, plus adaptors for attaching the slide hammer securely to the body of the injector.

• Contents: Slide Hammer, 4pcs 1/2" Sockets, 25, 27, 29 and 30mm, Tamper Proof Key, 5pcs Adaptor (Bosch, Delphi, Denso, Siemens), Ball Joint.


FREE6-24V Auto Probe with

4.5mtr Cable• Model No. PP1• List Price £39.95

• Set of four diesel injector seatcleaners, centring pilot and T-handle.

• Used to clean/decarboniseinjector seats when changinginjectors.

• Helps to avoid blow-back dueto poorly seated injectors.

• Suitable for a wide range of vehicles.


8pc Glow PlugReamer/BaseCleaning Set

FREEAngular Torque Gauge

1/2"Sq Drive• Model No.

VS530• List Price

£16.95

• Quickly removes accumulations of carbon residueinside the cylinder head assisting the installationand effective operation of replacement glow plugs.

• Includes four ream guides which aid the centralisationof the Chrome Vanadium reams.

• Suitable for M8, M10 and M12 threaded glow plugs.• Model No. VS312• List Price £169.95

Cylinder HeadComponentOrganiser

• An essential item for a cylinderhead rebuild.

• Keeps all components neat and tidy as they come offthe cylinder head.

• Saves time and frustration.• Model No. VSR01• List Price £39.95

33pc Glow PlugThread Repair Set

FREE4pc 3/8"Sq Drive DieselGlow Plug Socket Set

• Model No. SX0402• List Price £31.95

• Fast and effective remedy for damage to cylinder head glow plug threads.

• Set includes tools for the precise insertion of threaded inserts into the head and features a unique tap guide system to ensure their correct alignment.

• Includes 4 sizes of threaded adaptors suitable for common sizes of glow plug.


Glow Plug Puller Set• A comprehensive set suitable for

removing stubborn glow plugs.• Ideal for removing plugs that

have been unscrewed, but seized, due to residue build upor where the filament has been distorted.

• Quick and effective method, saving time and money.


FREE20pc Cleaning &

Decarbonising Brush Set


NEW

• Suitable for the removal and installation of the diesel injection nozzle on MAN, Mercedes-Benz and Scania commercial vehicles.

• Specially designed with window, toothed end and M14 pulling force screw.


• Designed to remove the fuelfilter on Vauxhall/Opel vehicles fitted with 1.9CDTi engines.

• Also fits some Alfa Romeo, Fiat and Saab 1.9JTD/TD vehicles.

• Filter housing fits into the plasticholder using a vice, so the key can be used to unscrew thehousing cap without causing damage.


Fuel Filter Removal Kit -Vauxhall/Opel

inc VAT

exc VAT£44.95£53.94

OFFER PRICE


Diesel & PetrolCompression,Leakage & TDC Kit

inc VAT

exc VAT£234.95£281.94

OFFER PRICE

FREEBrake Pipe Cutter


• A comprehensive kit for testing the compression and leakage on both diesel and petrol vehicles.

• Features 600psi gauge with large rubber bumper, straight and right angled quick connect fittings and an extensive range of spark/glow plug and injector adaptors.

• Includes TDC finder, ideal for use when theengine has no crankshaft timing marks.


14pc Valve Seat Cutter• Suitable for re-cutting inlet/exhaust

valve seats concentric to the valve guides.

• Features tungsten carbide cutting blades, expandable pilots and double end cutters for increased application.

• Cutter Sizes: Ø28-37mm 45º & 75º, Ø28-37mm 30º & Ø37-44mm 75º, Ø37-46mm 45º & 60º, Ø37-46mm 30º & Ø44-52mm 75º, Ø46mm 45º & Ø60mm 30º, Ø52mm 75º & Ø65mm 60º.


600mm Precision Straight Edge

• Suitable for testing for distortion on cylinder heads and engine blocks during engine overhauls and rebuilds.

• May be used with feeler gaugesfor high precision work.

• Supplied in storage case.• Model No. VS1480• List Price £135.95

Cylinder Head Stands

• Two support stands which locate into cylinder head via stud holes.

• Also provide clearance between head and workbench for reaming valve guides.


Compression TestersPush-On Type

• Fitted with Ø63mm gauge reading up to 300psi and 20kg/cm2.

• Cone type spark plug connection on straight rigid 130mm extensionaids quick installationon most petrol engines, including motorcycleand small portablepower units.

inc VAT

exc VAT£649.95£779.94

OFFER PRICE

inc VAT

exc VAT£64.95£77.94

OFFER PRICE

inc VAT

exc VAT£15.95£19.14

OFFER PRICE

inc VAT

exc VAT£89.95£107.94

OFFER PRICE

FREE2pc Valve Grinder

Set• Model No. VS1653• List Price £9.95

Technician's StraightEdge


FREE15 Blade Feeler Gauge - Metric• Model No.

VS511• List Price

£8.95

Angular Torque Gauge1/2"Sq Drive

• Model No. VS530


Model No. Type List Price Exc. VAT Inc. VAT

CT953 Angled £20.45 £12.95 £15.54CT954 Straight £20.45 £12.95 £15.54

Model No. CT953

Model No. CT954

Model No. Depth Capacity List Price Exc. VAT Inc. VAT

VS155 75mm Ø60-125mm £12.95 £8.45 £10.14VS156 75mm Ø60-175mm £18.95 £12.45 £14.94VS157 100mm Ø60-150mm £19.95 £12.95 £15.54VS158 150mm Ø60-150mm £26.95 £17.95 £21.54

Mo

del

No

. VS

156

Mo

del

No

. VS

157

Mo

del

No

. VS

158

FREE2pc Valve Grinder Set• Model No. VS1653• List Price £9.95

10pc Petrol CompressionTest Kit

• Ø59mm Gauge fitted with 250mm hose and quick connect.

• Scale reads from 0-21bar(0-300psi).• Includes four extension hoses and seven

plug thread adaptors from 10 to 18mm.• Suitable for most petrol engined cars

and light commercials.• Model No. VSE206• List Price £99.95

witheach

Piston Ring Compressors

Mo

del

No

. VS

155

Fuel Tank Sender Spanner3-Leg Ø75-160mm Drive24mm

• For removing and refitting fuel tanksender mounting rings.


inc VAT

exc VAT£17.95£21.54

OFFER PRICE


Thread RepairMaster Kit

inc VAT

exc VAT£69.95£83.94

OFFER PRICE

inc VAT

exc VAT£39.95£47.94

OFFER PRICE

inc VAT

exc VAT£129.95£155.94

OFFER PRICE

inc VAT

exc VAT£29.95£35.94

OFFER PRICE

inc VAT

exc VAT£99.95£119.94

OFFER PRICE

inc VAT

exc VAT£149.95£179.94

OFFER PRICE

inc VAT

exc VAT£79.95£95.94

OFFER PRICE

10pc Bearing Race & SealDriver Set - Aluminium

• Suitable for straight installationof bearing race without damageto the bearing or axle housing.

• Fits most popular bearing racesizes.

• Driver Sizes: 39.5, 44, 50, 59, 63, 64.5, 72, 76, 81mm


23pc AlternatorFreewheel PulleyRemoval Set

• A comprehensive set for easy removal offreewhee alternator pulley, either on or offthe vehicle.

• Allows alternator shaft to be held while pulleyretainer is removed.


Model No. Size Length List Price Exc. VAT Inc. VAT

VS624 12mm 260mm £44.95 £29.95 £35.94

VS625 14mm 260mm £46.95 £30.95 £37.14

Reverse Action SparkPlug Thread Chasers • Specially designed

to repair damaged, deep-seated spark plug threads on modern engines.

FREESpark Plug Boot

Puller Tongs• Model No. AK865• List Price £4.45

Model No. V

S624

Model No. V

S625

4pc Spark Plug Puller Set - VAG

37pc Bearing & SealInstallation Kit

FREE6 Function Professional

Digital Multimeter• Model No.

TM100• List Price

£37.45

FREESpark Plug Lead

Tool - VAG• Model No. VS5293• List Price £22.95

• Suitable for installation/removalof ignition coils on VAG vehicles.

• Long shafts with composite T-stylehandle for added control and stability.

• Prevents damage to ignition coils whilst allowing faster removal.


Spark Plug Thread Repair Kit

FREE4pc 3/8"Sq Drive Spark

Plug Socket Set• Model No. AK6556• List Price £28.95

NEWFSI Injector Remover/Installer& Service Kit - VAG

FREE• Model No.

MM20• List Price

£29.95

8 Function Digital Multimeter with Thermocouple

• New lightweight design for the installation of bearings without damaging the bearing or housing.

• Contains 3 metal bearing driftsleeves and 34 nylon drifts.

• Can also be used to install oil seals.

• Fits most sizes of bearing andseals found on modern vehicles.


• Suitable for five common sizes of thread.

• Creates a stronger internal thread in soft metals.

• Ideal for repairing damaged or stripped internal threads.

• Protects tapped threads against wear and damage.

• Includes drill bits, thread taps, insert installation and lug breaking tools.

• Model No. TRMK• List Price £109.95

• Comprehensive and time saving kit of spark plug thread repair tools.

• Especially suitable for the repair of deep-seated plug configurations.

• Stepped tap ensures correct alignment of cutter in existing spark plug hole.

• Extension tools allow easy access to the bottom of the plug recess.


witheach

FREE6pc Pick & Hook Set Extra-Long

• Model No. AK5215• List Price

£19.95

NEW

• Injector remover/installer and service kit for petrol injectorsfound in VAG vehicles covering 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6 and 4.2L V8 FSI engines.


ARRIVING OCTOBER


15 Blade FeelerGauge - Metric

• Metric graduated, 15 blade, feeler gauge.• Sizes: 0.06 to 0.70mm.• Blade dimensions: 75 x 13mm.• Model No. VS511• List Price £8.95

Universal ClutchAlignment Tool

inc VAT

exc VAT£5.45£6.54

OFFER PRICE

inc VAT

exc VAT£24.95£29.94

OFFER PRICE

inc VAT

exc VAT£9.95£11.94

OFFER PRICE

inc VAT

exc VAT£8.45£10.14

OFFER PRICE

inc VAT

exc VAT£19.95£23.94

OFFER PRICE

inc VAT

exc VAT£14.45£17.34

OFFER PRICE

inc VAT

exc VAT£8.95£10.74

OFFER PRICE

• Nylon components with steel main shaft.• Fits 90% of cars and light vans up to

5tonne gross (not suitable for Minis (A Series)or vehicles with double plate clutches).

• Suitable for front wheeldrive vehicles.

• Supplied with 2 different sized expanding collets.


Valve Spring CompressorOHC/OHV/CVH

• Suitable for most small and medium sized OHC enginesand also for general use on OHV and CVH engines.

• Universal jaw with 60-155mm capacity and 160mm throatdepth.


FREE2pc Valve Grinder Set• Model No. VS1653• List Price £9.95

Stud Remover& Installer

• Suitable for the removaland installation of various sizes of stud.

• Cam rotates to grip onto the stud for quick and easy use.

• Use with 1/2"Sq driveratchet wrench.


Mechanic'sStethoscope

• Quickly locates the source of engine noise such aspiston slap, worn gears and bearings, damagedvalves, water pump failure and blown gaskets and even dash board squeaks.

• Plastic ear pieces and300mm probe with soundamplifying chamber.


FREE3pc Miniature

Brush Set• Model No. AK9791• List Price £3.95

FREE3pc Miniature

Brush Set• Model No. AK9791• List Price £3.95

9pc Gasket Punch Set

• Interchangeable hollow punchset capable of punching holes ingaskets, leather, paper, plastic,wood sheet and other soft materials.


26 Blade Offset FeelerGauge - Dual Marked

• Imperial graduated 26 blade feeler gauge.• Sizes: 0.005" to 0.030"• Dual marked in Imperial and Metric.• Blade dimensions 75 x 13mm(45º-15mm offset).• Model No. VS515• List Price £21.95

Triple Leg Glaze BreakerØ50-175mm 75mmMedium Stones

• For removal of heat glaze and carbon deposits on cylinder walls.

• Fitted with 75mm, medium grade cutting stones and suitable for cylinders up to Ø175mm.

• Range collar adjusts arm travel between Ø50mm and Ø100mm or Ø100mm and Ø175mm.

• Adjustable spring tension gives finish control.• Model No. VS162• List Price £46.95

inc VAT

exc VAT£29.95£35.94

OFFER PRICE

Model No. Grade Pack Quantity List Price Exc. VAT Inc. VAT

VS1621 Medium 3 £9.75 £6.95 £8.34VS1622 Coarse 3 £9.75 £6.95 £8.34VS1623 Fine 3 £9.75 £6.95 £8.34

Pack of 3 75mmStones

• Application: VS162.Model N

o. VS1621

Promotion Code: VST12.09

Swivel Jaw Filter PliersØ57-120mm Capacity

• Jaws swivel up to 90º to give access to awkwardly positioned oil and fuel filters.

• Chemically blackened finish to prevent corrosion and non-slip grip for added comfort and control.

• Capacity: Ø57-120mm.• Model No. AK6417• List Price £44.95

Band Type Oil Filter Wrenches

3/8"Sq Drive Filter Wrench46mm AdBlue-Mercedes

• Designed to remove AdBlue filter housing cap on BlueTec engines, fitted to Mercedes commercial vehicles.


inc VAT

exc VAT£6.95£8.34

OFFER PRICE

inc VAT

exc VAT£28.95£34.74

OFFER PRICE

FREE8ltr Oil/Fluid Drain Pan• Model No. DRP01• List Price

£8.45

NEW

30pc Oil Filter CapWrench Set

15pc 3/8"Sq Drive MagneticOil Drain Plug Socket & Key Set

inc VAT

exc VAT£44.95£53.94

OFFER PRICE

inc VAT

exc VAT£95.95£115.14

OFFER PRICE

inc VAT

exc VAT£7.95£9.54

OFFER PRICE

inc VAT

exc VAT£7.95£9.54

OFFER PRICE

inc VAT

exc VAT£54.95£65.94

OFFER PRICE

• Each features magnetic retention to prevent sump plugs from accidently falling into drain pans.

• Suitable for use on engines, gearboxes and back axles.

• Includes application chart.• Contents: Square; 8, 10mm, Hex; 8,

10, 12, 13, 14, 17mm, TRX-Star*; T45,Sockets; 13, 14, 17, 18, 19, 21mm.


FREE8-in-1 Oil Drain Plug Wrench


• Extensive set designed for a wide range of vehicles.

• Cap type filter wrenches,made from 7 and 16 gauge steel, will withstand up to 115Nm (85lb.ft) of torque.

• Designed to grip like sockets,thereby minimising the possibility of crushed filters.

• Adaptor allows use with 3/8"or 1/2"Sq drive wrenches.

• Adjustable oil filter wrenchØ65-120mm.


Volvo Oil Filter CapWrench• Model No.


£12.45

NEW

NEW

NEW

NEW

Mercedes-Benz Oil FilterCap Wrench• Model No.


£12.45

Toyota Oil Filter Cap Wrench

Low Profile Oil/FluidDrainer

• Low profile design is ideal for the professional mechanic and DIY user.

• Ensures safe and clean collection, transportation and temporary storage of waste fluids.

• Four castors provide easy manoeuvrability.

• Includes grid to aid draining of filters and to prevent debris entering the tank.

• Model No. DRP011• List Price £72.95

Lexus/Toyota Oil Filter Cap Wrench• Model No.


£12.45

inc VAT

exc VAT£7.95£9.54

OFFER PRICE

Model No. Capacity List Price Exc. VAT Inc. VAT

AK644 Ø65-110mm £19.95 £12.95 £15.54

AK645 Ø105-155mm £19.95 £12.95 £15.54

Model No. A

K644

Model No. A

K645

14 Prices exclude VAT unless stated otherwise

inc VAT

exc VAT£59.95£71.94

OFFER PRICE



Refractometer AdBlue

• Refractometer designed to measure aqueous/urea content of AdBlue additive.

• Ensures AdBlue additive is correctly diluted before adding to vehicle’s AdBlue tank.

• Measures refractive index of fluid using only a drop of AdBlue.

• Simple calibration check using distilled water.


inc VAT

exc VAT£7.95£9.54

OFFER PRICE

NEWARRIVING OCTOBER


Oil Drain Plug MasterThread Repair Kit

Oil Filter DrainTube - VAG FSi

3pc Oil Filter Cap Wrench Set - Renault

Sump Separator

• Sump Plugs: M10 x 1.0, M12 x 1.5, M13 x 1.5, M14 x 1.5,M15 x 1.5, M16 x 1.5, M18 x 1.5, M20 x 1.5mm.


46mm Differential FilterSpanner - VAG

• Specially designed for removing and installing differentialfilters.

• Suitable for use onAudi; TT, Seat, Skoda,VW; 4Motion Golf and Passat.


inc VAT

exc VAT£49.95£59.94

OFFER PRICE

inc VAT

exc VAT£8.45£10.14

OFFER PRICE

inc VAT

exc VAT£8.95£10.74

OFFER PRICE

inc VAT

exc VAT£69.95£83.94

OFFER PRICE• Set is suitable for the most popular threads

used on cars and light commercial vehicles.• Sizes: M13 x 1.25, M13 x 1.5, M15 x 1.5,

M17 x 1.5, M20 x 1.5, M22 x 1.5mm.• Model No. VS661• List Price £124.95

FREE120pc Automotive

Fuse Assortment• Model No. BCF120• List Price £13.45

Oil Filter Wrench Claw Type 1/2" & 3/8"Sq Drive 65-110mm Capacity


Oil Filter Strap Wrench3/8" & 1/2"Sq Drive300mm Capacity

• Satin finish cast steel bodywith 3/8" and 1/2"Sq drives.

• May also be used with a 21mm (13/16") spanner.

• Extra wide Nylon webbingstrap suitable for filters up to Ø300mm.


inc VAT

exc VAT£9.95£11.94

OFFER PRICE

inc VAT

exc VAT£17.95£21.54

OFFER PRICE

inc VAT

exc VAT£15.95£19.14

OFFER PRICE

inc VAT

exc VAT£9.95£11.94

OFFER PRICE

inc VAT

exc VAT£22.95£27.54

OFFER PRICE

• Cap type filter wrenches for vehicles fitted with Renault dCi engines 1.5, 1.9, 2.2 and 2.5.

• Also compatible with some Nissan and Vauxhall/Opel vehicles.

• Sizes: 27, 76, 96mm.• Model No. VS7001• List Price £27.95

• Designed to separate the engine or gearboxsump without damaging the sump.

• Thin blade allows for the seal to be broken by lightly tapping the body with a hammer.

• Features two handle locations making it ideal for use in confined engine spaces.


Ø74mm Oil Filter Cap Wrench14 Flutes• Will withstand up to 115Nm (85lb.ft) of torque.• Applications: Purlux grove filters fitted to Audi,

BMW, Citroen, Fiat, Ford, Lancia, Mazda, Mercedes-Benz, Nissan, Peugeot, Porsche, Renault, Suzuki, Toyota, Vauxhall/Opel, VW.

• Model No. SX226 • List Price £15.95

• Designed to attach to the oil filter housing on VAG FSipetrol engines.

• Allows the filter housing tobe drained before removal,preventing spillage.

• Use in conjunction with a suitable oil drainer.


Oil Seal Removal/Installation Kit

• Comprehensive kit for the removal and installation of oil seals withoutdamaging the new seal or housing.

• Kit includes a seal removal puller and seven adaptors to fit most sizes of seal.

• Designed to allow original pulley/flange bolt to be used to press in the new seal, ensuring a squarely seated seal every time.


inc VAT

exc VAT£99.95£119.94

OFFER PRICE

FREE8-in-1 Oil Drain Plug Wrench


• Made from spring steel with plastic measuring tip for accurately checking the fluid level.

Model No. V

S920TD

Model No. V

S1200TD

Model No. Transmission Code List Price Length Exc. VAT Inc. VAT

VS920TD 716.5, 722.7, 722.8 £29.95 920mm £17.95 £21.54

VS1200TD 722.6 £29.95 1200mm £18.95 £22.74

Mercedes Transmission Dipsticks

534pc Sump Plug & Washer Assortment


inc VAT

exc VAT£9.95£11.94

OFFER PRICE

inc VAT

exc VAT£59.95£71.94

OFFER PRICE

inc VAT

exc VAT£59.95£71.94

OFFER PRICE

inc VAT

exc VAT£199.95OFFER PRICE

Cooling SystemVacuum Purge& Refill Kit

25pc Cooling SystemPressure Test Kit

• Traditional style cooling system pressure testing kit. Features five new adaptors increasing the vehicle applications. Suitable for Alfa, Audi, BMW, Chrysler, Citroen, Daewoo, Fiat, Ford, Honda, Hyundai, Kia, Lancia, Mazda, Mercedes, Mitsubishi, Nissan, Peugeot, Renault, Rover, Saab, Seat, Skoda, Suzuki,Toyota, Vauxhall/Opel, Volvo, VW. Also includes non-specific adaptors for other makes.


FREE9pc Hose Clip Removal

Tool Set• Model No. VS1662• List Price £124.95

£239.94

NEW

Brake & Fuel Hose PinchTool - Bar Type

• Suitable for both brake and fuel lines.• Simple, yet effective pinch action with

rounded clamp section to prevent damage to hose lining.

• Metal construction with chromed finish.


Refractometer Antifreeze/BatteryFluid/Screenwash

• Suitable for synthetic antifreeze mixtures including long life OAT (Organic Acid Technology).

• Temperature correctedprism ensures accuracy.

• Eyepiece with adjustable focus.


Model No. Type List Price Exc. VAT Inc. VAT

VS4120 Ethylene £21.95 £14.95 £17.94

VS4121 Propylene £21.95 £14.95 £17.94

Antifreeze Testers Twin-Rotor

• Features a temperaturecompensation rotor that automatically adjusts the reading regardless of the coolant temperature.

• Freeze protection level is indicated on the scale indegrees Celsius.

Model No.

VS4120Model N

o.

VS4121

FREEAntifreeze Tester

Tube Type• Model No. AK413• List Price £9.45

• Dramatically reduces cooling system refill time, without mess and without introducing air-locks.


Model No. Application Size List Price Exc. VAT Inc. VAT

VS030 Brake & Fuel Hoses Small £8.25 £5.45 £6.54VS031 Heater Hoses Medium £9.25 £5.95 £7.14VS032 Radiator Hoses Large £12.45 £7.95 £9.54

Composite Hose Pinch Tools

• Smooth rounded jaw edges prevent damageto internal hose reinforcement.

• Quick and simple - one handed use.• Made from durable glass reinforced nylon.

20pc Cleaning &DecarbonisingBrush Set

• Ideal for cleaning and decarbonising areas with limited access, especially glow plug andinjector apertures before refitting.

• Supplied in sizes from Ø9-19mm in brass, nylon and steel.

• Features quick-release extension bar for increased reach.


inc VAT

exc VAT£22.95£27.54

OFFER PRICE

FREEOxygen Sensor Port

Thread Chaser M18 x 1.5mm


Model No. V

S032

Model No. V

S030

Model No. V

S031

inc VAT

exc VAT£4.45£5.34

OFFER PRICE

• Allows removal of any small debris build up that can gather between the fins.

• Six different comb sizes.• Also suitable for domestic

and industrial air conditioning and heatexchange applications.


Radiator FinStraightener NEW


3pc Exhaust PipeExpander Set

2pc ExhaustPuller Tool Set

• Invaluable when installing exhaust systems.• T-handled tools allow easy fitting of exhaust

mounts.• One straight and one

hooked to suit block and ring mounts respectively.


Ratcheting ExhaustPipe Cutter

Kevlar Hot Sleeves

• Manufactured to CAT 2 BS EN 388 and BS EN 407 from 100% DuPont Kevlar®.

• Designed for use in engine bays to prevent cuts to forearms and burns from exhausts and other hot components.

• Thumb slot design ensures sleeve will stay in position.

inc VAT

exc VAT£8.85£10.62

OFFER PRICE

inc VAT

exc VAT£4.95£5.94

OFFER PRICE

inc VAT

exc VAT£89.95£107.94

OFFER PRICE

inc VAT

exc VAT£25.95£31.14

OFFER PRICE

inc VAT

exc VAT£59.95£71.94

OFFER PRICE

5pc Oxygen Sensor& Thread ChaserSet


• Ideal for fitting aftermarket components to standard exhausts.

• Sizes: Small; 30-44mm, Medium; 38-62mm,Large; 54-87mm.


Exhaust Doughnut Puller

• Steel construction with dipped vinyl handle.• Enables fast removal

and installation of rubberanti-vibration mountings found on modern exhaustsystems.


• Cuts up to 3mm thick andis suitable for the toughest materials includingstainless steel exhaustpipes.


Model No. Length List Price Exc. VAT Inc. VAT

SSP36 355mm £11.95 £6.95 £8.34SSP37 460mm £14.95 £8.45 £10.14

Exhaust Fume Extraction Systems 230V - 370W

• Wall mounting electric fan fitted with heat resistant ducting and exhaust pipe cone with exhaust gas analyser port.

• Ideal for bikes, cars and car derived vans.• Requires installation onto workshop wall and ducting to expel exhaust gases. • Does not include electrical switch gear.• Ideal for smaller garages and workshops where space is limited.

Model No. Type Motor List Price Exc. VAT Inc. VAT

EFS101 Single Hose 370W - 230V 50Hz £1345.95 £899.95 £1079.94

EFS102 Twin Hose 370W - 230V 50Hz £1795.95 £1199.95 £1439.94

Model No. EFS101 Model No. EFS102

Mechanic's Mat Set EVA - 22mm

• Set comprises full length and kneeler mats.• For use on workshop floors when working

on wheels, brakes, tyres and exhausts etc.• Also ideal for roadside repairs.• Sizes: Kneeler; 385 x 280 x 22mm,

Full-length; 890 x 390 x 22mm.• Model No. VS857• List Price £34.95

inc VAT

exc VAT£19.95£23.94

OFFER PRICE

FREE8ltr Oil/Fluid Drain Pan• Model No. DRP01• List Price £8.45

9pc Hose ClipRemoval Tool Set

• All the hose clip tools you are likely to need in one case.• Model No. VS1662• List Price £124.95

FREE17ltr Antifreeze/Fluid

Drain Pan• Model No. DRP04• List Price £25.95

inc VAT

exc VAT£65.95£79.14

OFFER PRICE


Petrol Engine Setting/Locking Kit Alfa Romeo, Fiat 1.4 - MultiAir Belt Drive

Petrol Engine Setting/Locking Kit - Fiat, Ford, Lancia 1.2, 1.4 8v Belt Drive

Petrol Engine Setting/LockingKit - Alfa Romeo Twin Spark1.4, 1.6, 1.8, 2.0 16v TwinCam - Belt Drive

Petrol Engine Setting/LockingKit - Fiat, Lancia 1.6 16v Belt Drive

inc VAT

exc VAT£157.95£189.54

OFFER PRICE

inc VAT

exc VAT£26.95£32.34

OFFER PRICE

inc VAT

exc VAT£79.95£95.94

OFFER PRICE

inc VAT

exc VAT£139.95£167.94

OFFER PRICE

inc VAT

exc VAT£64.95£77.94

OFFER PRICE

inc VAT

exc VAT£89.95£107.94

OFFER PRICE

inc VAT

exc VAT£99.95£119.94

OFFER PRICE

inc VAT

exc VAT£69.95£83.94

OFFER PRICE

• The MultiAir enginereplaces the inlet camshaft with an electro/hydraulic system operating the inlet valves.

• This kit is required to set the engine timing when carrying out belt replacement.

• Features a camshaft setting plate, crankshaftlocking tool and tensioner adjuster.


• This range of Fiat 1.3 16v diesel engines, used by a number of vehicle manufacturers, are alltwin camshaft, common rail diesels.

• The chain drive connects the crankshaftto the exhaust camshaft which in turn is connected by gears to the inlet camshaft.

• The overhaul kit is designed to minimise the level of disassembly so the cylinder head/camshafts can be removed without removing the front-end timing cover, sprockets and timing chain.


Diesel Engine Setting/Locking Kit - Fiat 1.7/1.9D/TD Belt Drive

• Suitable for timing belt replacement on 1.7/1.9 Fiat vehicles.

• Features camshaft locking plates and crankshaft timing tool.


• Kit consists of camshaft setting plate, crankshaft locking tooland belt tensioner adjuster for the 1.2 engine.

• Additional sprocket locking tooland alignment fixture for the camshaft sensor on the 1.4 VVTengine.


• Kit includes camshaft settingplates for locking the camshafts in the timed position.

• The plates are positioned in place of the camshaft bearing caps.

• The kit also includes timing and balance shaft belt tensioner adjusters.

• TDC positioning tools arealso required to time these engines, not supplied in kit.


Petrol Engine Setting/LockingKit - Fiat, Lancia 1.6 16v Belt Drive

• Kit consists of Camshaft Setting Plates and a special timing belt tensioner adjuster.


TDC Position Tool Alfa Romeo, Fiat• Used in conjunction with Model

No. AK9634M dial gauge (notincluded) and enables accurate interpretation of piston position relative to TDC.


NEW

NEWNEW

• Kit contains inlet and exhaust camshaft setting plates and atiming belt tensioner adjuster.

• TDC Position on these twin camengines is established using VSE2515 TDC Positioning Tool and AK9634M Dial Gauge.


Diesel Engine Timing OverhaulKit - Alfa Romeo, Fiat, Ford, Lancia, Suzuki, Vauxhall/Opel 1.3 JTD/TDCi - Chain Drive

ARRIVING OCTOBER


Petrol Engine Setting/Locking Kit -Land Rover, MG, Rover 2.0, 2.5 KV6 - Belt Drive

Flywheel LockingTool

Injection & HP Pump Remover/Sprocket Retainer - BMW M47,M57, Land Rover (Td6),Vauxhall/Opel

inc VAT

exc VAT£39.95£47.94

OFFER PRICE

inc VAT

exc VAT£9.95£11.94

OFFER PRICE

inc VAT

exc VAT£84.95£101.94

OFFER PRICE

inc VAT

exc VAT£84.95£101.94

OFFER PRICE

inc VAT

exc VAT£44.95£53.94

OFFER PRICE

inc VAT

exc VAT£39.95£47.94

OFFER PRICE

inc VAT

exc VAT£25.95£31.14

OFFER PRICE

inc VAT

exc VAT£25.95£31.14

OFFER PRICE

inc VAT

exc VAT£319.95£383.94

OFFER PRICE

• Used to lock the flywheel so the bottom pulley boltcan be loosened or tightened, which is usuallynecessary when replacing the timing belt.

• Removal of the starter motor or gearboxmay be required for fitment of the tool.

• Adjustment on thetool allows it to fit most vehicles.


FREEPetrol Engine CamshaftSetting Plates - MG 2.0,2.5 KV6 (190) - Belt Drive• Model No. VS4617• List Price £36.95

NEW

NEW

NEW

NEW

Injection & HP Pump Remover/Sprocket Retainer M47R LandRover, Rover/MG• For engine timing use

Setting/Locking Kit Model No. VSE5666.

• Model No: VSE5665• List Price £39.95

• Set comprises flywheel locking pin (threaded) and camshaft locking pin to cover engine timing on the Land Rover Td5 engines in Defender and Discovery models.


Diesel Engine Setting/Locking Kit - Jaguar, Land Rover 2.7 V6Belt Drive

• Setting and locking kit for 2.7 diesel belt drive engines, fitted to both Land Rover and Jaguar vehicles.

• Kit contains camshaft alignment/timing pins and flywheel locking tools.


Petrol Engine Twin VanosService Kit - BMW M52TU,M54, M56

• For use with twin vanos variable valve/timing units on six cylinder BMW engines.

• Designed for dismantling/assemblingand timing of the unit after engine overhaul/repair work.

• Used in conjunction with Model No. VS4425 Setting/Locking Tool Kit for engine timing.

• Model No.VSE5906• List Price £124.95

• Kit includes camshaft setting plate and TDC location pin which are required to ‘set’ and ‘lock’ the specified 1.7 and 2.5diesel engines in the timing position.

• The kit also contains timing chain tensioner retaining pins (pair), tensioner compression lever and injection pump remover/sprocket retainer which is used to retain and supportthe sprocket and timing chains in position when the pump has been removed.


Diesel Engine Setting/Locking Kit - BMW, Land Rover, Vauxhall/OpelM41, M51 - Chain Drive

NEW• Suitable for timing the camshaft

and crankshaft, on chain drive1.3 diesel engines.

• Set also includes a tensioner locking pin.

• Model No. VSE5881A• List Price £59.95

Diesel Engine Setting/Locking Kit - Alfa Romeo, Fiat, Ford, Lancia, Suzuki,Vauxhall/Opel 1.3D JTD(M)/TDCi/DDiS/CDTi 16v Chain Drive

Diesel Engine Setting/LockingKit - Land Rover 2.5D Td5Chain Drive

• For engine timing useSetting/Locking Kit Model No. VSE5666.


NEW

• Kit includes all enginetiming belt replacement tools for the 2.0 and 2.5 variants of the KV6 quad cam engine.

• Applications: Rover: 825 (96-99), 45, 75 (99on)Land Rover: Freelander (00on).



Petrol Engine Setting/Locking KitFord, Mazda - Belt - Chain Drive

• Includes revised design camshaft setting plate and tensioner locking pin.

• This kit covers the complete range of Ford Duratec engines 1.25 through to 2.0 16vin both belt and chain drive variants.

• Pins also suitable for some Mazda vehicles.• Model No. VSE5515• List Price £22.45

inc VAT

exc VAT£15.95£19.14

OFFER PRICE

Belt Guide Roller AdjusterVauxhall/Opel V6

inc VAT

exc VAT£54.95£65.94

OFFER PRICE

inc VAT

exc VAT£129.95£155.94

OFFER PRICE

inc VAT

exc VAT£44.95£53.94

OFFER PRICE

inc VAT

exc VAT£115.95£139.14

OFFER PRICE

inc VAT

exc VAT£16.95£20.34

OFFER PRICE

inc VAT

exc VAT£34.95£41.94

OFFER PRICE

Diesel EngineSetting/LockingTool Set - FordTDCi, Mazda D1.4, 1.6, PSAHDi - Belt Drive

• Features timing pins to lock and hold the camshaft and crankshaft in the timed position.

• Flywheel locking tool can also be used for Ford Mondeo/Transit vehicles.

• Model No. VSE5846B• List Price £22.95

NEW

• Essential tools for timing beltreplacement on a wide rangeof Renault, Nissan & Vauxhall/Opel diesel engines.


Diesel/Petrol Engine Setting/Locking Master Kit - Ford Belt - Chain Drive

Petrol Engine Setting/Locking KitRenault 1.4, 1.6, 1.8, 2.0 16v K4J, K4M, F4P, F4R(t) - Belt Drive

• Updated kit suitable for timing beltreplacement on 1.4, 1.6, 1.8 and 2.0 engines fitted in Renault vehicles.

• These engines will require the use of associated tool, Model No. VSE5034 or VSE5734 Camshaft Sprocket HoldingTool, to loosen the camshaft sprocketbolts.

• Kit features updated camshaft settingplate which avoids the camshaft positionsensor on later 1.4 and 1.6 engines.

• Model No. VSE5071A• List Price £79.95

• Master kit of setting & locking tools suitable for a wide range of modern Ford vehicles.

• Also suitable for some Mazda vehicles.


Diesel Engine Locking Kit - Nissan,Renault dCi, Vauxhall/Opel 1.5, 1.9, 2.2, 2.5Di/DTi/CDTi Belt Drive

Auxiliary Stretch BeltRemoval/InstallationTool

inc VAT

exc VAT£15.95£19.14

OFFER PRICE

inc VAT

exc VAT£33.95£40.74

OFFER PRICE

• Designed for the recommended removal and installation of elasticated or stretch drive belts fitted to modern auxiliary drive systems such as the alternator or power steering.


Diesel/Petrol Engine Crankshaft/Camshaft Locking Pin Set Renault 1.5, 1.8, 1.9, 2.0 - Belt Drive

• Set of camshaft and crankshaft locking pins for Renault diesel and petrol engines.

• Suitable for locking engine during cam belt replacement or during associated engine maintenance.


• Suitable for adjusting the position of the upper andlower guide rollers on theVauxhall/Opel V6 EcoTec engine.

• Helps ensure that the timing belt is taut during installation and to assist initial belt tension.


Petrol Engine Camshaft SettingTool - VAG 1.4, 1.6 Belt Drive

• Suitable for VW 1.4 and 1.6twin camshaft/twin belt engines introduced in 1997.



16pc Setting/Locking Tool Kit

• Setting and locking kit for a range of VAG vehicles with Pumpe Duse TDi PD (1.9).

• Contents: Injection pump locking pin, locking tensioner tool and crankshaft locking tool.


Diesel Engine Setting/LockingKit VAG 2.5TDi V6 - Belt Drive

• Essential tool required when removing the cylinder head/camshafts on VAG PumpeDuse and common rail diesels.

• Set comprises camshaftsprocket hub holding tooland hub remover.


inc VAT

exc VAT£84.95£101.94

OFFER PRICE

inc VAT

exc VAT£79.95£95.94

OFFER PRICE

inc VAT

exc VAT£79.95£95.94

OFFER PRICE

FREEMini Digital


FREE8 Function

Digital Multimeter

with Thermocouple

• Model No. MM20• List Price £29.95

inc VAT

exc VAT£11.95£14.34

OFFER PRICE

inc VAT

exc VAT£47.95£57.54

OFFER PRICE

inc VAT

exc VAT£44.95£53.94

OFFER PRICE

inc VAT

exc VAT£39.95£47.94

OFFER PRICE

inc VAT

exc VAT£11.95£14.34

OFFER PRICE

• Updated kit of camshaft, crankshaft and flywheel locking tools with wide general coverage.

• Applications: Audi, Citroen, Fiat, Ford, Peugeot, Renault, Rover, Saab, Seat, Skoda, Vauxhall/Opel, VW.



• Special tools required during removal/installation of the balance shaft on certain VAG 2.0 Pumpe Duse diesel engines.

• Set comprises balance shaft locking tool and chain tensioner locking pin.

• These engines are a belt drive withthe balance shaft driven separately by a chain.


NEW

NEWNEW

• Suitable for belt replacement on Pumpe Duse diesel engines fitted to VAG vehicles and Ford Galaxy from 1999 on.

• Kit contains both crank locking tools for ‘Round’ and ‘Oval’ crankshaft gears, camshaft pins and tensioner tools for hydraulic and mechanical belt tensioners.


Diesel Engine Setting/Locking Kit - VAG Pumpe Duse 1.2, 1.4, 1.9, 2.0TDi PD Belt Drive

9pc Belt Tensioner Wrench Set

• Interchangeable auxiliary and timing pulley belt tensioner wrench set.

• A time saving and effective method for the professional technician.

• Sizes: 12-19mm.• Model No. VS789• List Price £119.95

• Suitable for the VAG 2.5 V6 dieselengines first introduced in 1997.

• Includes front end support guides, crankshaft locking pin, camshaft setting plates, injection pumplocking pin, tensioner socket and tensioner locking pin.


Diesel Engine Balance ShaftLocking Set VAG 2.0 PumpeDuse - Belt Drive

Diesel Engine Camshaft Sprocket Hub Remover/Installer Set - VAG - Belt Drive

Diesel Engine Setting/Locking Kit VAG Pumpe Duse 1.2, 1.4, 1.9 - Belt Drive

Diesel/Petrol Camshaft SprocketRemover VAG 1.9, 2.4, 2.5, 2.7, 2.8 - Belt Drive

• Specially designed to remove camshaft sprockets with 5 and 6 spokes from Audi, Skoda and VW vehicles.

• Features ball end thrust screw toreduce damage to camshaft bolt.


Also 1.6, 2.0common rail

ARRIVING OCTOBER


62mm Front WheelBearing GEN2 Removal/Installation Kit

Front Wheel Bearing GEN2 Removal/Installation Kits


78mm Front WheelBearing GEN2Removal/Installation Kit

inc VAT


£239.94

inc VAT


£239.94

inc VAT


£239.94 inc VAT

exc VAT£239.95£287.94

OFFER PRICE

• Applications: Audi; A1 (2010-on), A2 (00-05), Seat; Cordoba (03-09), Ibiza (02-12), Skoda; Fabia (00-12),Roomster (06-12), VW; Fox (05-10), Polo (02-12).



NEWGEN 1

GEN 2

GEN 3

Double rowcontactbearing.

Hub unit withbearing (Single Flange).

Hub unit withbearing(Double Flange).

• Designed for the second generation of wheel bearings found onmodern vehicles.

• These bearings are lightweight with an integral mounting flange.• They are also pre-loaded with a retaining ring that secures the

bearing into the housing.• Suitable to be used in situ when replacing the front wheel bearings.• Supplied in carry-case.

18pc Brake Piston Wind-Back Tool Kit

With Each Kit


FREE

• Applications: Audi; A2 1.2TDi PD (01-05), VW; Lupo 3L 1.2TDi PD (01-06).


• Applications: Skoda; Fabia (00-12), VW; Fox (05-10), Polo (02-09)


• Applications: Ford; C-Max (07-11), Focus II (04-11), Focus C-Max (03-07), Mazda; 3 (03-05), Volvo; C30 (06-10), C70 (05-10), S40 (04-12), V50 (04-10).



Optical Wheel Alignment Gauge

Professional Coil Spring Compressor Set1000kg Capacity

2pc Heavy-DutyCoil Spring Compressor Set

• Heavy-duty coil spring compressor with hardened steel body and force screw.

• Ensures smooth compression of spring.

• Maximum Capacityper Pair: 1000kg.


Coil Spring Compressing Stations - 1500kg Capacity

Steering Turntables Pair

2pc Coil Spring Compressor• Hardened carbon

steel lead screws and cast jaws.

• Use with 1/2"Sq drive wrench.

• 230mm Maximum jaw opening.


FREE4pc Mini Hook Set


inc VAT

exc VAT£245.95£295.14

OFFER PRICE

inc VAT

exc VAT£22.95£27.54

OFFER PRICE

inc VAT

exc VAT£94.95£113.94

OFFER PRICE

inc VAT

exc VAT£189.95£227.94

OFFER PRICE

inc VAT

exc VAT£219.95£263.94

OFFER PRICE

inc VAT

exc VAT£22.95£27.54

OFFER PRICE

FREESteering Rack Knuckle Tool


FREEMagnetic Camber/

Castor Gauge• Model No. GA45• List Price £54.95

inc VAT

exc VAT£499.95£599.94

OFFER PRICE

• Measures up to 45º rotation in either direction.

• Maximum loading 1360kg per pair.

• Model No. GA44• List Price £329.95

FREE35pc 1/2”Sq Drive

WallDrive® Socket SetMetric

• Model No. S0914• List Price

£107.45

• Suitable for MacPherson strut coil springs.

• Features a yoke extension bracket that also allows use on conical springs.

• Supplied with three pairs of different sized interchangeable yokes, for a wide range of vehicle applications and plastic yoke protectors that protect the spring coating from damage which can invalidate the vehicle manufacturer's warranty.

• Model No. RE229• List Price £499.95

• Quicker and easier than using ratchet driven spring compressor.• Plastic coated yokes reduce the risk of spring slippage/damage.• Suitable for springs from Ø102mm to Ø160mm.




NEW

inc VAT

exc VAT£299.95£359.94

OFFER PRICE

4pc Subframe LocatingPin Set - VAG• Set of four subframe

locating pins allows precise alignment ofthe subframe to the vehicle's chassis.

• Compatible with a wide variety of Audi and VW vehicles.


• Steel and cast aluminium construction.

• Measures toe-in and toe-out by contact with wheel rims and optical sight to alignment markers.

• Works on practically all cars and light commercial vehicles with rim diameters between 200mm and 600mm.

• Model No. GA40• List Price £769.95

Front Disc Removal Tool Kit - Ford Transit

Mercedes Lower Ball Joint Remover/Installer

Hydraulic HGV BallJoint Separator

Wheel Bearing Removal/Installation Kit

Universal CVJ Boot Clamp Kit

Ball Joint Remover

Ball Joint Separator

5pc 1/2"Sq Drive Impact Hub Nut Socket Set

Ball Joint Splitter Hydraulic& Manual - HGV

FREE4pc Prybar Set


£26.95

inc VAT

exc VAT£119.95£143.94

OFFER PRICE

inc VAT

exc VAT£59.95£71.94

OFFER PRICE

inc VAT

exc VAT£39.95£47.94

OFFER PRICE

inc VAT

exc VAT£10.95£13.14

OFFER PRICE

inc VAT

exc VAT£6.45£7.74

OFFER PRICE

* Approximate quantities

• Fast and simple to use.• Kit includes 56mtr* of high

quality stainless steel banding with a tensile strength of 420N/mm2.

• Dispenser case also houses 150* clamp sets and unique pliers with integrated cutters and band tensioner.

• Never be caught without the right sized boot clamp again.

• Model No. BSL102• List Price £56.95

inc VAT

exc VAT£139.95£167.94

OFFER PRICE

• Specially designed to be operated manually or by 12tonne hydraulic ram supplied.

• Features a step down thread adaptor thatallows fitting of the manual thrust screw or hydraulic ram.

• Hydraulic ram interchangeable with Model No. PS990.


inc VAT

exc VAT£39.95£47.94

OFFER PRICE

• Heavy-duty, high quality, Chrome Molybdenum impact sockets suitable for use with any 1/2"Sq drive impact tool.

• Blackened finish for added corrosion resistance.

• Tool suitable for hub nut applications where high torque is required.

• Contents: 30, 32, 34, 35, 36mm.• Model No. SX050• List Price £74.95

inc VAT

exc VAT£169.95£203.94

OFFER PRICE

FREE2pc CoilSpring

Compressor

• Model No. AK3841

• List Price £36.95 inc VAT


FREE4pc 1/2"Sq Drive

Alloy Wheel ImpactSocket Set

• Model No. SX030• List Price

£49.95

• Suitable for the in situ removal and installation of front lower ball joints on W220, W211 & W230 Mercedes.

• Includes all necessary adaptors.

• Use with ratchet wrench. • Model No. VS1272• List Price £274.95

Promotion Code: VST12.0924 Prices exclude VAT unless stated otherwise

£203.94

• Suitable for removal of Ford Transit (2000on) brake discs.

• Simple mechanical action makes removal of bound-on or stubborn discs fast and easy.

• Kit comprises of extra-long forged steel legs, triple yoke and force screw.


• Forged steel body ball joint splitter suitable for light commercial vehicles.

• Specially designed to be operated manually or by 1.5tonne hydraulic ram supplied.


• Forged steel body with satin finish.• Suitable for most small cars and

light vans.• Model No. AK382• List Price £12.45

• Chemically blackened forged steel body with thrust bolt.

• Suitable for most small cars and light vans.

• Jaw Capacity: 19mm.• Model No. AK381• List Price £18.95

• Comprehensive kit for the fast and effective removal and installation of wheel bearings on front-wheel drive vehicles.

• Reduces chances of damage to hub and bearing.


Steering Rack Knuckle Tools

• Suitable for the fast and easy removal/installation of the steering knuckle.• Designed to fit over the steering shaft onto the steering rack.

CVJ Boot BandPliers

BMW Rear Ball Joint Tool

• Remove/install press-fit rear suspension ball joints in situ, on BMW 5 and 7 Series.

• Applications: BMW 5 Series E39, 7 Series E38.


CVJ Boot Installation Tool

• Composite cone.• Enables installation

of CVJ boot without splitting drive train.


Universal Stretch CVJ Boot

• Universal CV boot made from high quality elastomer material suitable for use with air operated boot installation tools.

• Supplied with fitting kit including clips, grease sachet and cutting guide.

• Suitable for most car and car derived van applications.

• Model No. CV96• List Price £5.95ea

2pc Lower Ball Joint Socket Set

• Set of two heat treated alloy steel sockets.• Suitable for removal of OEM and aftermarket

lower ball joints.• Applications:

Citroen; Xantia, C5, C6, Peugeot; 405, 406, 407, 605, 607.

• Supplied in carry-case.


Ear-Type Clip PliersExtra Heavy-Duty

• Steel jaws with PVC coated handles for added comfort.

• Each handle features a 1/2"Sq drive for use with a torque wrench and breaker bar where vehicle maker demands specific band tensions.



Model No. Diameter List Price Exc. VAT Inc. VAT

VS4001 35.5 - 41mm £109.95 £49.95 £59.94

VS4002 29 - 34mm £109.95 £44.95 £53.94

Model No. V

S4001

Model No. V

S4002

inc VAT

exc VAT£49.95£59.94

OFFER PRICE

inc VAT

exc VAT£99.95£119.94

OFFER PRICE

inc VAT

exc VAT£21.95£26.34

BUNDLE PRICE

inc VAT

exc VAT£19.95£23.94

OFFER PRICE

inc VAT

exc VAT£19.95£23.94

OFFER PRICE

inc VAT

exc VAT£39.95£47.94

OFFER PRICE

FREEEar-Type CVJ Boot/

Hose Clip Pliers• Model No. VS1633• List Price

£12.45

CVJ Removal Tool

• Quickly removes the CV joint from the drive shaft without damaging the joint, and keeps hands free for releasing retaining circlip.

• Reduces risk of damage totransmission.

• Saves on labour time and suitable for most vehicles.


Bundle Includes:1 x Model No. VS7052 x Model No. CV96Bundle Model No. VS705BDTotal Bundle List Price £31.85


3pc Ball Joint Removal Set

inc VAT

exc VAT£65.95£79.14

OFFER PRICE

• Low profile set suitable for most modern vehicles.

• Three sizes of jaw allow use on most cars and light commercial vehicles.

• Jaw Capacities: Small 23mm, Medium 28mm, Large 34mm.

• Features heavy-duty forged steel body and hardened screw with thrust ball.


FREECVJ Boot

Installation Tool

• Model No. VS705


• For the assembly of new stainlesssteel bands on drive shafts where a torque setting is required.


Bundle Deal

FREE5pc Prybar/Heelbar Set• Model No. AK20641• List Price £29.95


Disc Brake Piston SpreaderPistol Grip

• Designed to fit front brake callipers.

• Pistol grip design provides a fast, no nonsense approach to pushing the piston back.


11pc Brake Service Kit

Brake & Clutch Bleeding System

• One-man brake and clutch bleeding the professional way.

• Requires no external power source - simply fill and pump.

• Holds 2.5ltr of hydraulic fluid - flush the entire system with one fill without the risk of running the reservoir dry.

• Pressure range makes unit suitable for use with ABS systems.

• Fitted with Ø42mm cap and suitable for most European models.


Automatic Brake & Clutch Bleeder

Pneumatic Pressure Bleeder Kit

• One-man pressure brake and clutch bleeding system suitable for the professional workshop.

• Low pressure tank (20-40psi) can be pre-charged with compressed air - making the unit fully portable.

• Suitable for use on ABS systems.• Features a long delivery hose for operation with a low

level ramp and long reach handle for easy mobility.• Model No. VS0204• List Price £399.95

2pc CalliperSupport Hooks

• Used to hold the brake calliper away from the hub when replacing brake pads.

• Simply hang the calliper hook onto a suitable suspension component to hold the calliper out of the way and also stop the weight of the calliper damaging the brake hose.


FREEGravity Brake Bleeder Kit

• ModelNo. VS0209


FREEGravity Brake Bleeder Kit

inc VAT

exc VAT£24.95£29.94

OFFER PRICE

inc VAT

exc VAT£274.95£329.94

OFFER PRICE

inc VAT

exc VAT£54.95£65.94

OFFER PRICE

inc VAT

exc VAT£69.95£83.94

OFFER PRICE

inc VAT

exc VAT£19.95£23.94

OFFER PRICE

inc VAT

exc VAT£59.95£71.94

OFFER PRICE

inc VAT

exc VAT£99.95£119.94

OFFER PRICE

inc VAT

exc VAT£3.95£4.74

OFFER PRICE

• Set contains the majority of tools required to carry out servicing/repair work on disc and drum brakes.

• This handy set is supplied in a carry-case to keep these commonly used tools together and is ideal for the busy workshop.


HGV Air Dryer Cartridge Remover

• Spring loaded air dryer filter wrench.• Essential tool for removing commercial air brake filters.• Model No. VS935• List Price £139.95

FREEBrake Piston Cube

3/8"Sq Drive

• Model No. VS039


• Fast, easy and effective bleeding of brakes and clutch using air from tyre.

• Innovative design incorporates valve for control of air pressure, extra-long air hose for use with larger vehicles and magnetic reservoirbase to prevent accidental spillage.

• Supplied with rangeof common adaptors.


FREEDisc Brake Piston

Spreader - Pistol Grip


FREEMechanic’s Mat Set

EVA 22mm


FREE18pc Brake PistonWind-Back Tool Kit


18pc Brake PistonWind-Back Tool Kit


NEW

• ModelNo. VS0209


• Suitable for push-back and wind-back brake pistons.

• Includes left and right-handed thrust bolt assemblies.

• Applications: Alfa Romeo, Audi, BMW, Citroen, Fiat, Ford, Honda, Jaguar, Mazda, Mercedes, Mitsubishi, Nissan, Peugeot, Renault, Rover, Saab, Seat, Skoda, Subaru, Toyota, Vauxhall/Opel, VW, Volvo.


Brake Flaring Tool Turret Type

• Cam-action body mounts in bench vice for ease of use.• Supplied with 4.75mm, 3/16", 1/4", 5/16" and 3/8"

dies and 4.75mm, 3/16", 1/4", 5/16" clamp blocks for forming most popular flares.

• Optional 3/8" clamp block available.• Model No. PFT07• List Price £279.95

Brake & Fuel Pipe Inspection Tool

Brake Pipe Bender

12pc Fuel Line Clamp & Stopper Kit

4pc Hose Pinch Tool Set• Light and compact steel

alloy construction allows easy use where space is limited.

• Rounded jaw edges prevents damage to internal hose reinforcements.

• Suitable for use on fuel, vacuum and brake hoses.


Brake Calliper Thread Repair Kit M12 x 1.5mm

Brake Pipe Cutter• Patented design ensures

that the spring mechanism maintains the correct cutting pressure on the pipe at all times.

• Features a smooth screw action and nickel plated blade for increased cutting performance.


Electronic Parking BrakeService Tool• Suitable for safe and professional

replacement of brake pads onvehicles fitted with an electronic parking brake (EPB).

• Deactivates/activates SBC(Sensotronic Brake Control).

• Applications: Audi; A6, A8 (02on), Mercedes; E Class (02-07) (W211), SL (02on)(R230), CLS (01-02) (C219), VW; Passat (05on).


FREE3pc Miniature

Brush Set



inc VAT

exc VAT£179.95£215.94

OFFER PRICE

inc VAT

exc VAT£14.95£17.94

OFFER PRICE

inc VAT

exc VAT£139.95£167.94

OFFER PRICE

inc VAT

exc VAT£89.95£107.94

OFFER PRICE

inc VAT

exc VAT£49.95£59.94

OFFER PRICE

inc VAT

exc VAT£10.95£13.14

OFFER PRICE

inc VAT

exc VAT£12.95£15.54

OFFER PRICE

• Compact design for bending automotive brake pipes without crushing the pipe walls.

• Rigid construction makes it suitable for steel pipes.

• Will bend Ø3mm (1/8"), Ø4.75mm (3/16") and Ø6mm (1/4") pipe up to 90°.


FREE7mm Angled Head

Long Reach Hex Wrench


£4.95

• Specially designed for the removal ofcorrosion from brake and fuel pipes for fast and thorough inspection.

• Applications: 3.5mm (Citroen), 4, 4.75mm; 3/16" Pipes.

• Ideal for use during MOT inspections.• Model No. VS0210• List Price £16.95

FREEDisc Brake Piston

Spreader Tool• Model No. AK711• List Price £32.95

• Quick and effective method of replacing brake calliper threads using M12 x 1.5mm inserts.

• Kit includes M12 x 1.5mm tap, step drill, insert locator, two washers with centre roller bearing and ten replacementinserts in storage case.


FREEBrake Pipe Bender



Brake & Fuel Pipe Inspection Tool



Brake Pipe Cutter




• A comprehensive kit designed to stop theflow of fuel from fuel lines after disconnection.

• Compatible with brake, transmission, fuel lines and other applications.


FREE8pc Brake Piston

Wind-Back Tool Kit• Model No. VS028• List Price £71.95

inc VAT

exc VAT£14.95£17.94

OFFER PRICE


Tyre Changer Pneumatic/Manual Operation• Centre cone clamp makes this

tyre changer ideal for use with most automotive/light commercial open centre wheels.

• Heavy-duty bead breaker (operating force up to 1250kg) - is able to handle latest safety wheels.

• Min./Max. Wheel Clamping Size: 203/460mm (8"/18").

• To prevent damage to the rims of the alloy wheel, it is essential to use a TC963 Tyre Bar.

• Model No. TC962• List Price £729.95

3pc 1/2"Sq Drive Alloy WheelDeep Impact Socket Set

Wheel Nut Cap Remover

Torque Sticks 1/2"Sq Drive

• Chrome Molybdenum steel torque stick designed for use with air and electric impact wrenches.• Prevents over-torque of wheel nuts.• Features a twist distortion marking for checking serviceability of tool.

inc VAT

exc VAT£499.95£599.94

OFFER PRICE

inc VAT

exc VAT£199.95£239.94

OFFER PRICE

inc VAT

exc VAT£44.95£53.94

OFFER PRICE

inc VAT

exc VAT£34.95£41.94

OFFER PRICE

inc VAT

exc VAT£34.95£41.94

OFFER PRICE

inc VAT

exc VAT£17.95£21.54

OFFER PRICE

14pc Wheel Maintenance Kit

• Removes surface dirt and corrosion.

• Ideal for preparing wheels, hubs and brake discs or drums for re-assembly.

• Suitable for use with power drill or air impact wrench.

• Supplied with 1/2"Sq drive adaptor.• Model No. SX036• List Price £52.95

7pc 1/2"Sq Drive Locking Wheel Nut Removal Set

Bead Seating ToolFREE4pc 1/2"Sq Drive

Alloy Wheel Impact Socket Set

• Model No. SX030• List Price

£49.95

• Removes the plastic wheel nut caps fitted to Audi, Seat, Skoda, Vauxhall/Opel and VW vehicles.

• Eliminates the need to lever off caps with a screwdriver, which may damage the alloy wheel.

• Up to six caps may be stored in the handle, ready for refitting.


FREE2pc 1/2"Sq Drive

Locking Wheel Nut Removal Set

• Model No. SX200


• Features nylon sleeve and insert to prevent damage to alloy wheels.

• Colour coded sockets for easy size selection.

• Comprises deep 17, 19 and 21mm 1/2"Sq drive sockets, plusspare nylon sleeves.

• Model No. SX031D• List Price £69.95

Model No. ColourTorque Rating

List Price Exc. VAT Inc. VAT

VS2243 Green 65lb.ft (90Nm) £19.95 £12.95 £15.54

VS2244 Black 75lb.ft (100Nm) £19.95 £12.95 £15.54

VS2245 Gold 80lb.ft (110Nm) £19.95 £12.95 £15.54

VS2246 Red 90lb.ft (120Nm) £19.95 £12.95 £15.54

VS2247 Blue 100lb.ft (135Nm) £19.95 £12.95 £15.54

Model No. V

S2243

Model No. V

S2244

Model No. V

S2245

Model No. V

S2246

Model No. V

S2247


• Dumps air into tyre void forcing bead to seat against rim for inflation.

• Fully certified tank with gauge and safety valve prevents over pressurising.

• Suitable for use on cars, commercials, agricultural and ATV tyres.

• Model No. TC900• List Price £299.95

• May also be used on fixings too damaged or corroded for standard sockets.

• Suitable for use with impact wrenches.• Contents: 17, 18.5, 20, 21.5, 23, 24.5, 26mm.• Model No. SX202• List Price £52.95

12V Heavy-Duty Compressor

TPMS Valve Tool

• Specialist tool designed to remove 11mm and 12mm TPMS sensor nuts and reseating the bevelled and non-bevelled sealing grommets.

• Model No. TSTPMS• List Price £5.45

Dial Type Tyre Pressure GaugeTUV/GS Approved

Jumbo Tyre Inflators

Clip-On Connector

Push-On Connector

• Composite body and dial type jumbo gauge with rubber protector.

• Calibrated in bar and psi.• Fitted with 400mm rubber hose.

Tyre Valve Installer

• Simplifies installation of tyre valves in tubeless wheels.• Pulls tyre valve assembly through rim.• Shank is notched to accommodate

various rim styles.• Strong 270mm long handle

with corrosion resistant plating.• Model No. TST/TVI• List Price £8.45

Single Barrel Foot Pump

Digital Tyre TreadDepth Gauge

FREETyre Pressure Gauge

• Model No. TSTPG1• List Price £3.75

inc VAT

exc VAT£49.95£59.94

OFFER PRICE

inc VAT

exc VAT£3.55£4.26

OFFER PRICE

inc VAT

exc VAT£5.95£7.14

OFFER PRICE

inc VAT

exc VAT£9.45£11.34

OFFER PRICE

inc VAT

exc VAT£4.95£5.94

OFFER PRICE

inc VAT

exc VAT£12.95£15.54

OFFER PRICE

inc VAT

exc VAT£11.95£14.34

OFFER PRICE

• Dial type pressure gauge with metal body and offset valve connector.

• Accurate to ±1.5psi.• Range: 0-3bar/0-40psi.• Model No. TST/PG97• List Price £8.95

• Suitable for inflating tyres on cars, vans and 4x4s.

• Powered by reliable, heavy-duty motor producing 45ft3 of air per hour.

• Integral gauge reads up to 20bar/300psi.

• Maximum Working Pressure: 200psi.

• Accessory kit containing, Presta type adaptor, ball spike and two inflatables adaptors included in storagecompartment on base.

• Model No. MAC2300• List Price £74.95

• 610mm Flexible hose with locking connector.

• 0-100psi.• Supplied with accessory

for inflating items such as small inflatable boats,air beds and balls etc.

• Model No. FP1• List Price £12.95

FREETyre Valve Core Tool

• Model No. TST/VCT


• Tough Composite sliding gauge.

• 10mm High figures in LCD display.

• Range: 0-25mm/0-1".• Zero setting control

allows for comparative measurement.


Model No. RangeAir Inlet

SizeList

PriceExc. VAT Inc. VAT

SA9303 0-6.9bar(0-100psi) 1/4"BSP £31.95 £19.95 £23.94

SA9313 0-11bar(0-160psi) 1/4"BSP £34.95 £21.95 £26.34

Model No. SA9303

Model No. SA9313


Tyre Valve Removal/Installation Tool

• Remove and install leaking tyre valves without having to remove the tyre.

• Works on steel wheels and especially good for valves on motorcycle or agricultural wheels.

• Time saving tool.• Contents: Cone, Push/Pull Driver, Valve Hook Tool.• Not suitable for high pressure valves.• Model No. TSTVRK• List Price £19.95

NEW

Remove tyre valve from wheel. Push valve through the wheel. Pull valve to seat in wheel rim.


Twin Leg PullersBar Type

• Heavy-duty twin leg bar type puller.• Easy removal of pulleys, flywheels,

bearings and gears. • Drop-forged Chrome Vanadium

steel.• Heat treated and chrome plated.• Thrust bearing prevents wear and

damage to shaft.

19pc Hydraulic Puller Set

5tonne Triple Leg Hydraulic Puller

• Heavy-duty triple leg 5tonne hydraulic puller.

• Suitable for pulling hubs, flanges, gears and bearings.

• Supplied with three 2-position puller legs and carry-case.

• Model No. HP5• List Price £114.95

Hydraulic Hub Puller Set

• Chromed, heat treated S45C steel puller yoke withhydraulic ram.

• Suitable for fourand five stud hubs.

• Hydraulic ram provides additional power to extract themost stubborn hubs.

• Model No. PS993• List Price £119.95

4pc Triple Leg Gear Puller Set• Drop-forged, high carbon

steel reversible legs and body.

• Heat treated and zinc plated to resist corrosion.

• Swivel thrust plates on larger sizes preventdamage to shaft ends.

• Sizes: 75, 100, 150, 200mm.• Model No. VS79• List Price £60.95

12pc Mechanical Bearing Separator Set

inc VAT

exc VAT£79.95£95.94

OFFER PRICE

inc VAT

exc VAT£99.95£119.94

OFFER PRICEinc VAT

exc VAT£84.95£101.94

OFFER PRICE

inc VAT

exc VAT£39.95£47.94

OFFER PRICE

inc VAT

exc VAT£69.95£83.94

OFFER PRICE

inc VAT

exc VAT£29.95£35.94

OFFER PRICE

inc VAT

exc VAT£8.45£10.14

OFFER PRICE

FREE6-24V Auto Probe with 4.5mtr Cable

• Model No. PP1


FREE6pc Pick & HookSet Extra-Long


FREE5pc Scraper & Hook Set

• Model No. AK520



• Model No. AK520


1.2mtr Telescopic Bonnet/Tailgate Support

• Three tier telescopic aluminium tailgate/bonnet support with tough rubber pads at each end.

• Lock in any position with a simple twist.• Also used for holding open doors,

depressing clutch, brake or accelerator pedals.


• Multi-purpose puller set for extracting flywheels and pulleys.

• Minimum/MaximumSpread: 40/93mm.


• Mechanical puller set with Ø30-50mm and Ø50-75mm separators and single yoke with 180mm thrust bolt.





FREETwin Leg Puller Bar Type 120 x 100mm



Model No. Size/Spread x Reach List Price Exc. VAT Inc. VAT

AK46080 80 x 100mm £13.45 £7.95 £9.54AK46120 120 x 100mm £18.95 £10.95 £13.14AK46150 150 x 150mm £33.95 £18.95 £22.74AK46200 200 x 150mm £41.95 £23.95 £28.74AK46250 250 x 200mm £62.95 £35.95 £43.14

Mo

del

No

. AK

4625

0


• Forged steel 2-way yoke allows twin or triple leg pulls.

• 10tonne Hydraulic power unit with tommy bar.

• Supplied with 3 x 3 position puller arms and 3 sets of extension plates.

• Maximum reach: 250mm.


49pc HarmonicBalancer Puller Set

Anemometer

• Wind speedmeasuring device featuring live/max/average/wind chill and Beaufort scale.

• Also reads temperature which can be measured in either °C or °F.

• Readings are displayed on a 24mm high back-lit LCD screen.

• Features a battery indicator and auto/manual power off.

• Requires CR2032 3V battery (supplied).


Sound Level Meter 1ltr Chemical Sprayer

• Ideal for use with some brakecleaners, detergents, traffic film remover, penetrating oils and weed killer.

• Adjustable nozzle enables easy and direct application of liquid exactly where it is required.

• Robust composite construction with 1ltr capacity container.

• A compatibility document is available.

• Model No. TP01• List Price £22.95

On-Vehicle Brake Disc Lathe• Time and money saver that allows the brake disc to be refaced

whilst still on the vehicle and mounts directly to the mountingholes of the brake calliper.

• Eliminates disc run-out and compensates for small inaccuraciesin the hubs.

• Features a flexible mounting system with a selection of adaptorsfor various vehicles.

• Automatic setting with cut-out allows the operator to leave theunit unattended.

• See Video tab on our website for full demonstration videowww.sealey.co.uk.


Workshop HeadlampBeam Setter• Suitable for pre-MOT inspection

in garages and bodyshops.• Utilises same optical box and

aiming screen as fitted to our MOT approved headlamp beam setter.

• Fixed aiming screen. Internal analogue LUX meter for accurate light intensity measurement.

• Suitable for all types of cars and light commercial vehicles.

• Fitted with fixed column and rubber wheels.

• Model No. HBS2001• List Price £724.95

inc VAT

exc VAT£49.95£59.94

OFFER PRICE

inc VAT

exc VAT£13.95£16.78

OFFER PRICE

inc VAT

exc VAT£22.95£27.54

OFFER PRICE

inc VAT

exc VAT£99.95£119.94

OFFER PRICE

inc VAT

exc VAT£3995.95£4795.14

OFFER PRICE

inc VAT

exc VAT£499.95£599.94

OFFER PRICE

FREEMini Digital


• High quality meter suitable formeasurement of environmental and mechanical noise.

• Conforms to IEC61672-1 class 2 for sound meters.

• Features min./max. measurements, over and under range, A and Cweighting, fast and slow response, data hold, record, digital read-out and bar graph with backlight.

• Powered by 9V battery (supplied).• Model No. TA060• List Price £139.95

FREEReplacement Cutting

Tips for Brake Disc Lathe Pack of 10

• Model No. VS0299R• List Price

£179.95


NEW

FREEMini Digital


Ultrasonic Leak Detector

• Quick and simple location of air, water, dust leaks.

• Place the transmitter in the vehicle and close the doors and windows.

• Trace the detector around outside of the screen, windows and door seals to locate the leak.

• Includes adjustable headphone for detector.• Transmitter and detector powered by 9V Lithium

batteries.• Supplied in foam lined carry-case.• Model No. PP4• List Price £79.95


Model No.

Applications Picture

ES200-20GM Astra H,Zafira B Petrol(2005 on)

ES200-21

GM Vectra C Deisel, Saab 9-3 Diesel(2005 on)

ES200-22Citroen Jumper,Fiat Ducato,Peugeot Boxer

ES200-23 GM Vectra Petrol

ES200-25 Fiat Stilo 1.6 Petrol

ES200-26 Alfa Romeo 159Diesel (2006 on)

ES200-27 GM Zafira A/Astra1.6 Petrol

ES200-28 Fiat Doblo

ES200-29 VW Transporter

Model No.


ES200-11 Citroen C4

ES200-12 Citroen C5

ES200-13 Peugeot 407

ES200-14Citroen Jumpy,Peugeot Expert/806

ES200-15 Citroen Picasso/Xantia/Xsara/ZX

ES200-16 Citroen C8,Peugeot 807

ES200-17 Peugeot 607

ES200-18Skoda Fabia,Seat Ibiza (2002 on),VW Polo

ES200-19 Ford Fiesta Diesel(2005 on)

Model No.


ES200-01Ford Galaxy, Seat Alhambra,VW Sharan

ES200-02Audi A3, Seat Leon,Skoda Octavia,VW Golf, Beetle

ES200-03 Ford Focus

ES200-04 Peugeot 206, 307

ES200-05Citroen Berlingo,Peugeot 406,Partner

ES200-06 Ford C-Max

ES200-07 Ford Fusion, Fiesta

ES200-08

Audi A3,Seat Altea/Toledo,Skoda Octavia 2004,VW Golf 5

ES200-10 Skoda Roomster,VW Lupo

Under-Vehicle Engine Support - Base Unit

ALL ADAPTORS £54.95 EACH LIST PRICE £143.95 EACH

inc VAT

exc VAT£89.95£107.94

OFFER PRICE

inc VAT

exc VAT£54.95£65.94

OFFER PRICE

• Supports/raises engine from underneath during maintenance operations without use of a trolley jack or conventional over-engine support beam.

• Allows unimpeded access to the engine from above and also permits safe movementof the vehicle whilst the engine is raised.

• Vehicle-specific adaptor sleeve mounts onto the vehicle structure andtakes the support beam.

• Engine is raised by a screw adjusted pad. • Vital for rapid and safe timing belt changes, engine

mount replacement and transmission removal.• No risk of scratching customer's paintwork around

inner wings.• No need for chains or lifting straps.• Sleeve system allows fitting to a wide range of vehicles.• Model No. ES200• List Price £219.95

inc VAT

exc VAT£59.95£71.94

OFFER PRICE

NEW

NEWFREE

Adjustable Double HeadSuction Gripper

• Designed for handling materials such as glass, tiles, plastic, sheet metal and other non-porous materials.

• Two Ø115mm rubber suction grips prevent damage to surface.

• Adjustable handle allows use on curved surfaces.• Holds up to 60kg in the horizontal position.• Model No. AK8929• List Price £37.45

7pc Mini Automotive Trim& Upholstery Tool Set

• Tools specially designed to remove small items of trim.

• Manufactured from nylon to minimise damage.

• Compact design allows use even where space is limited or where trim is most fragile.

• Model No. RT7KIT• List Price £25.95

40kg Vacuum Suction Cup

• Rubber suction device with red line indicator which warns ofany vacuum loss.

• Easy attachment on smooth,non-porous flat surfaces such as glass, sheet metal and tiles.


4pc Micro Welding Clamp Set

10pc Scraper Set• Nylon and glass fibre manufacture

provides strength and durability.• Ideal for removing gasket residue

and other stubborn materials.• Model No. RT10K• List Price £33.95

2pc Mini Trim Clip Removal Pliers

Single Head Suction Gripper

40kg Vacuum Suction Cup - Curved Surfaces

• Profiled rubber suction cup suitable for attachment to curved surfacessuch as windscreens.

• Red line indicator warns of any vacuum loss.

• Easy attachment on smooth, non-porous flat surfaces such as glass, sheet metal and tiles.


inc VAT

exc VAT£20.95£25.14

OFFER PRICE

inc VAT

exc VAT£79.95£95.94

OFFER PRICE

inc VAT

exc VAT£14.95£17.94

OFFER PRICE

inc VAT

exc VAT£3.95£4.74

OFFER PRICE

inc VAT

exc VAT£22.45£26.94

OFFER PRICE

inc VAT

exc VAT£14.95£17.94

OFFER PRICE

inc VAT

exc VAT£5.95£7.14

OFFER PRICE

inc VAT

exc VAT£24.95£29.94

OFFER PRICE

NEW

NEWNEW

NEW

NEW

2pc Mini Trim Clip Removal Pliers

• Model No. RT011• List Price £5.95

FREE2pc Mini Trim Clip

Removal Pliers


FREE2pc Mini Trim Clip

Removal Pliers


5pc Auto Electrical Installation Kit

• Glass reinforced nylon trim clip removal pliers with spring-loadedhandles.

• Length: 100mm.• Model No. RT011• List Price £5.95

• Ø60mm Rubber suction grip prevents damage to surface.

• Designed for handling glass, tiles, plastic and other non-porous material.

• Holds up to 10kg in the horizontal position.• Model No. AK9990• List Price £9.95


• Small and compact with exceptionalclamping force.

• Ideal for automotive applicationswhen positioning body panels prior to welding.

• Micro clamp enables areas to be secured where other tools struggleto fit, such as door columns andwindow edges.


• Slim profile helps to locate and seat wiring loom in awkward places and to separate individual wires ready for inspection/installation, so minimizing damage.

• Model No. RT5KIT• List Price £24.95

ARRIVING OCTOBER


33pc PaintlessDent Repair Kit

Air Suction Dent Puller

Door Hinge & Handle Removal Kit

7pc Airbag Removal Tool Set

• Designed for the safe removal of steering wheel airbags.

• Suitable for use on Audi, BMW, Mercedes, Seat, Skoda and VW vehicles.


6pc Pick & Hook Set Extra-Long

36 Function Radio Release Key Set• Thirty-six tools in one.• Updated set of tools

for safe, fast, authorised removal of fitted radios.

• Composite handle allows firm and comfortable grip.


inc VAT

exc VAT£99.95£119.94

OFFER PRICE

inc VAT

exc VAT£34.95£41.94

OFFER PRICE

inc VAT

exc VAT£11.95£14.34

OFFER PRICE

inc VAT

exc VAT£24.95£29.94

OFFER PRICE

inc VAT

exc VAT£12.95£15.54

OFFER PRICE

inc VAT

exc VAT£25.95£31.14

OFFER PRICE

inc VAT

exc VAT£299.95£359.94

OFFER PRICE

NEW

FREE3pc Windscreen

Handling Kit• Model No. WK1• List Price

£74.95

FREE6-24V Circuit Tester


£7.75

• Six long reach picks with black finished steel shafts.

• Contents: Straight, Right Angle, Half-Round, Swan Neck, 45°/ 90° Tip, 40°/45° Tip.

• Suitable for pin/clip picking and the removal of O-rings and seals.


• TRX-Star* tools for the easy removal of door hinges and handles.

• For Audi, Mercedes, Porsche and VW models.

• Consists of two TRX-Star* long-reach drivers, 8mm hex drive reversible ratchet wrench and four TRX-Star* bits.

• Model No. VS805• List Price £40.95 FREE

• Model No. RTTS• List Price £4.95

Trim Stick

9pc Radio Release Tool Set

• Stainless steel radio removal tools.• For Audi, BMW, Ford, Mercedes

Benz and VW.• Supplied in labelled storage

pouch.• Model No. VS804• List Price £21.95

• Air activated suction pad keepsfirm hold of panel.

• Slide hammer used to ease out dents and depressions without damage to the paint surface.

• Ideal for initial panel reshaping.

• Supplied with large and small suction pads.


FREEØ60mm

Air Suction Pad

• Model No. RE101.60



ProfessionalDent Pullers

• Specialist device for pulling dents from panels and bodywork.

• Contoured aluminiumhandle and suction release trigger give the technician close control.

Model No. DiameterMax. Pull Capacity

List Price Exc. VAT Inc. VAT

AK100 Ø75mm 10kg £27.95 £17.95 £21.54

AK101 Ø100mm 15kg £28.95 £18.95 £22.74

AK102 Ø125mm 20kg £29.95 £19.95 £23.94

Model No. AK100

• Heavyweight, heat treated, high quality steel components are carefully shaped and finished to allow the technician (with practice) to coax outall manner of dents and creases from behind the body panel, removingthe need to respray/refinish the painted surface.

• The results achieved with this kit will depend on the skill of the operator.• Model No. RE102• List Price £399.95

inc VAT

exc VAT£49.95£59.94

OFFER PRICE

inc VAT

exc VAT£29.95£35.94

OFFER PRICE

inc VAT

exc VAT£24.95£29.94

OFFER PRICE

inc VAT

exc VAT£69.95£83.94

OFFER PRICE

inc VAT

exc VAT£84.95£101.94

OFFER PRICE

inc VAT

exc VAT£32.95£39.54

OFFER PRICE

inc VAT

exc VAT£149.95£179.94

OFFER PRICE

FREE20pc Spray Gun Cleaning Set

• Model No. BSGC2


FREE5pc Mini Brush SprayGun Cleaning Set

• Model No. BSGC4


FREE20pc Spray Gun Cleaning Set

• Model No. BSGC2


HVLP Gravity Feed Spray Gun2.0mm Set-Up• Standard large set-up and economy price make

this spray gun ideal for applying base coats.• Round/flat fan control allows spray pattern to be

adjusted for any job.• Anodized spray gun body resists corrosion

and makes for easier cleaning.• Aluminium air cap with stainless steel

needle and nozzle make this HVLP gun suitable for water based paint.

• Supplied with 2.0mm set-up suitable for primer. 1.4 and 1.7mm set-ups available separately.

• Model No. HVLP742• List Price £72.95

Gravity Feed Spray Gun 2.0mm Set-Up

• Superbly balanced spray gun ideal for applying base coats.

• Features adjustable paint flow,fan width and air regulator controls.

• Supplied with composite gravity feed pot.

• Suitable for use with water based paints.

• Alternative set-ups available separately.

• Model No. SSG5• List Price £45.95

Wheel Skate Hydraulic 680kg Capacity

5pc Air Accessory Kit

• Contents: Suction Feed Spray Gun, Blowgun, Tyre Inflator, Paraffin Gun, Coiled Air Hose with couplings.

• Model No. SA33/S• List Price £49.95

10pc Heavy-Duty Slide Hammer Kit• Heavy-duty slide hammer with

4.4kg sliding weight.• For use on body panels

and vehicle chassis.• Supplied with various

attachments.• Model No. DP90• List Price

£119.95

• Professional gravity feed spray gun with 0.8mm set-up, ideal for small panels.

• HVLP Design gives a high transfer efficiency of paint saving on costs.

• Brass air cap with stainless steel needle and nozzle suitable for water based paints.

• Features air and paint flow controls for fine adjustment of spray pattern.

• Fully polished body resists corrosion and makes for easy cleaning.

• Alternative set-up available separately.• 1.0mm Set-up available.• Model No. HVLP736• List Price £69.95

Dust-Free Air Operated Random Orbital Sander

inc VAT

exc VAT£46.95£56.34

OFFER PRICE

General PurposeSuction Feed Spray Gun 1.5mm Set-Up

• Ideal for applying base coats.• Features adjustable paint flow

and fan width controls.• Supplied with aluminium screw

type suction feed pot. • Suitable for use with water

based paints.• Alternative set-ups available

separately.• Model No. SSG2• List Price £34.95 FREE

5pc Mini Brush Spray GunCleaning Set

• Model No. BSGC4


FREE150 x 230mm Hand Pads Fine Pack of 10

• Model No. HP1523F



• Steel tube chassis with four Ø100mm nylon castors.

• Aluminium rollers cradle vehicle’s tyre and are capable of handling up to 240mm profile.

• Suitable for bodyshops, garages, showrooms or anywhere a disabled vehicle needs moving on an even surface.

• Note: Sold as singles, but must be used in pairs.

• Model No. WS680• List Price £209.95

HVLP Gravity Feed Touch-Up Spray Gun 0.8mm Set-Up

• Lightweight, balanced aluminium body with smooth double bearing counter balance assembly for fatigue free operation.

• Fitted with airflow control valve, safety knuckle guard and housing insulation to prevent hand chill.

• Pad not included.• Model No. SA7/SAS• List Price £99.95


inc VAT

exc VAT£34.95£41.94

OFFER PRICE

inc VAT

exc VAT£59.95£71.94

OFFER PRICE

inc VAT

exc VAT£36.95£44.34

OFFER PRICE

inc VAT

exc VAT£119.95£143.94

OFFER PRICE

3pc 3/8"Sq Drive Torque Control Spark Plug Socket Set

4pc T-Handle Spark Plug Socket Set

STOCK CLEARANCETHESE ITEMS WILL SELL OUT

Model No.

WidthList

PriceExc. VAT

Inc. VAT

WK02005 16mm £7.45 £3.45 £4.14WK02006 13mm £7.45 £3.45 £4.14


inc VAT

exc VAT£19.95£23.94

OFFER PRICE

inc VAT

exc VAT£129.95£155.94

OFFER PRICE

inc VAT

exc VAT£89.95£107.94

OFFER PRICE

inc VAT

exc VAT£54.95£65.94

OFFER PRICE

inc VAT

exc VAT£5.95£7.14

OFFER PRICE

inc VAT

exc VAT£114.95£137.94

OFFER PRICE

inc VAT

exc VAT£39.95£47.94

OFFER PRICE

inc VAT

exc VAT£39.95£47.94

OFFER PRICE

• Universal joint, sparkplug sockets with built-in extension bar.

• Socket Sizes: 14, 16, 18, 21mm.


• Chrome Molybdenum steel, WallDrive®, impact sockets.

• Torque Limit: 60lb.ft/80Nm.

• Sizes: 17, 19, 21, 22mm.• Model No. SX035• List Price £134.95

4pc 1/2"Sq Drive TorqueControl Impact Socket Set

• Features spring loaded safety jaws for easy locationof the jaws on assembly.

• Prevents accidental release of spring under load.• Use with 24mm hex socket or spanner.• Model No. AK3844• List Price £104.95

2pc Coil Spring Compressorwith Safety Jaws

• Chrome Vanadium steel, WallDrive®, 12-point sockets, with plug retaining insert.

• Sizes: 14, 16, 21mm.• Torque Limits: 19, 20,

25Nm.• Model No. SX037• List Price £97.45

• Supplied with 3 common torque ratings, 10, 15 and 25Nm.

• Developed in conjunction with leading plug maker.


3pc 3/8"Sq Drive Spark & Glow Plug Torque Limiter Set

• Simple to use digital meter indicates throttle position sensoroutput voltage.

• Connect to battery terminals and sensor signal wire.


Throttle Potentiometer Tester

13pc Fuel Pump Timing KitBosch, Lucas/CAV• Kit includes Bosch adaptor for pumps fitted

with M10 service ports commonly found on VW/Audi, Volvo, Renault and Ford Transit.


Diesel Engine Setting/Locking Kit Ford 1.6, 1.8, 1.9, 2.5 - Belt Drive

• Model No. VSE101


• Suitable for Ford 1.6 and 1.8 diesel engines as fitted to Fiesta, Escort, Orion, P100, Sierra, Mondeo Transit 2.5DI (85on) and Galaxy 1.9TD.

• Used in conjunction withModel No. VS2110 Test Kit.

• Kit consists of three in-line tees, ten male and female thread adaptors and spareO-rings and valve cores.

Petrol Injection Pressure Test Kit Mechanical Systems



• Suitable for setting and locking Renault 3.0 V6 (L7X) engines and Citroen/Peugeot V6 (XFZ) engines (97-01).

• Kit contains locking pins for camshafts and crankshaft, camshaft holding tool and tensioner tools.

Petrol Engine Setting/Locking Kit - Citroen, Peugeot, Renault 3.0 V6 - Belt Drive



• Suitable for removal andinstallation of free-floating crankshaft pulley.


Crankshaft Pulley Remover & Installer - Ford

Petrol Engine Tensioner Locking PinsVAG 1.6, 1.8, 2.0 - Belt Drive• Set of timing belt

tensioner locking pins for a wide variety of VW, Audi and Seat petrol and diesel vehicles.

• Holds back tensioner assembly on cam belt and auxiliary belt during belt change.


• Suitable for Sealey AK420, WK020, WK021 and WK022 urethane cutting tools.

• Blades can be re-sharpened.

Windscreen Removal Tools Flat Blade

33pc 1/4"Sq Drive Socket SetWallDrive® - Metric

41pc 3/8"Sq Drive Socket SetWallDrive® - Metric

5pc Flare NutsSpanner Set - Metric

1/2"Sq Drive Digital Torque Adaptorwith Angle Function 20-200Nm

10pc 1/4", 3/8" & 1/2"Sq DriveHex Socket Bit Set - Stubby

23pc TRX-P* & Security TRX-TS* BitSet 1/4" & 3/8"Sq Drive

6pc Hammer-ThruScrewdriver Set

3pc Quick ReleaseLocking Pliers Set

inc VAT

exc VAT£29.95£35.94

OFFER PRICE

inc VAT

exc VAT£19.95£23.94

OFFER PRICE

inc VAT

exc VAT£17.95£21.54

OFFER PRICE

inc VAT

exc VAT£39.95£47.94

OFFER PRICE

inc VAT

exc VAT£59.95£71.94

OFFER PRICE

inc VAT

exc VAT£20.95£25.14

OFFER PRICE

inc VAT

exc VAT£64.95£77.94

OFFER PRICE

inc VAT

exc VAT£21.95£26.34

OFFER PRICE

• Deluxe professional socket set with standard and deep,heat treated, mirror polished Chrome Vanadium steel sockets.

• Covers sizes from 4 to 14mm.• Features 48-tooth gear-to-gear comfort grip ratchet

handle, extension bars and accessories.• Supplied in tough, durable

storage case with a contents map displayed on the inside of the lid.


• Deluxe professional socket set with standard and deep,heat treated, mirror polished Chrome Vanadium steel sockets.

• Covers sizes from 6 to 24mm.• Features 48-tooth gear-to-gear comfort grip ratchet

handle, spark plug sockets, extension bars and accessories.

• Supplied in tough, durable carry-case with contents map displayed on the inside of the lid.


• Drop-forged Chrome Vanadium steel sockets, heattreated and chrome plated with a fully polished mirror finish for corrosion resistance.

• S2 Steel stubby hex bits with a zinc phosphate finish.• Ideal for limited access applications.• Contents: 4, 5, 6, 7, 8, 10,

12, 14, 17, 19mm.• Knurled ring for extra grip

with greasy fingers.• Model No. AK6229• List Price £33.95

• Heat treated Chrome Molybdenum and Chrome Vanadium steel construction with a smooth satin finish.

• Deeply serrated and hardened teeth grip the workpiece from any angle.

• Curved jaw design applies maximum pressure to all four corners of nut or bolt heads making it ideal for high torque applications.

• Features one hand no-pinch quick release grip toprovide comfort and control, reduce hand fatigue and are much easier to use than traditional stylelocking pliers.

• Contents: 140 & 220mm Curved Jaw, 210mm Long Nose.



• Designed for use with a standard ratchet or breaker bar.

• Ideal for work around the engine bay and the tightening of wheel nuts to factory specifications.

• Large LCD display with LED/audible alarm indicating achieved and target torque levels.

• Selectable readings in Nm, lb.ft, lb.in or kg.m.

• Accurate to ±2% of stated capacity and operates in either direction.

• Features angle mode, eliminating the need for angle gauges and protractors providing the most accurate and fastest way to measure torque plus angle tighteningsequences.

• Will also accumulate angle measurement when multiple turns are required, ideal for use whereaccess is restricted.

• Model No. STW291• List Price £129.95

NEW

• Drop-forged Chrome Vanadium steel with contoured shafts.

• Fully hardened, tempered and chrome plated with polished mirror finish for resistance to corrosion.

• Flare type spanner jaw suitable for most common sizes of compression joint fittings.

• Five spanners covering ten sizes.• Model No. AK2651• List Price £39.95

NEW

• Hardened and tempered Chrome Vanadium steel shafts with a satin polished finish.

• Features hexagonal bolsters for use with a wrench.• Contoured, textured handles with hammer caps.• Shot blasted and blackened tips.• Contents: Slotted; 5 x 100,

6 x 150, 8 x 175mm, Phillips; #1 x 75, #2 x 100, #3 x 150mm.


• Comprises six sided TRX-P* and five sided security TRX-TS* bits manufactured from S2 Chrome Vanadium steel.

• TRX-P* fixings are now common place on new Europeanvehicles such as Renault, Vauxhall, Citroen and Peugeot.

• If a TRX-Star* bit is used on a TRX-P* fixing it can result in damage to the fastener and tool. Using the correct bit gives greater torque and minimises wear.

• TRX-TS* bits are suitable for a range of applications such as fuel injection pumps and air conditioning units.

• Contents: TRX-P* Bits; TP10-TP60, Security TRX-TS* Bits; TS10H-TS60H, Drive Adaptors; 1/4"Sq x 6mm Hex, 3/8"Sq x 10mm Hex, Magnetic Quick Chuck.



inc VAT

exc VAT£299.95£359.94

OFFER PRICE

inc VAT

exc VAT£349.95£419.94

OFFER PRICE

inc VAT


inc VAT


NEWMotorcycle StorageShelters

Side Stand Type Motorcycle Dolly

Motorcycle Lift 365kg Capacity

• Min./Max. Height: 220/760mm.• Working Platform Size (W x L): 480 x 1350mm.• All steel construction with foot operated, integral hydraulic pump and ram assembly.• Fitted with safety lock device to fix platform at three working heights of 760mm, 640mm

and 500mm and to prevent accidental lowering.• Suitable only for motorcycles with a centre stand.• Support platform fitted with full width loading ramp.• Base assembly fitted with transport wheels and

lock-downs to prevent lift from moving during use.• Model No. MC365• List Price £469.95

Motorcycle Lift 450kg Capacity

• Min./Max. Height: 175/810mm.• Platform (W x L): 145 x 2140mm.• All steel construction with foot operated, integral

hydraulic pump and ram assembly.• Fitted with platform safety lock device to prevent

accidental lowering.• Base assembly fitted with transport wheels allowing

lift to be moved in horizontal or vertical position.• Model No. MC450• List Price £499.95


Hydraulic Mini Tractor/Quad/Motorcycle Lift 680kg Capacity

• All steel construction with heavy-duty hydraulic ram.• Supplied with separate, foot operated, hydraulic pump

and reservoir unit.• Features two additional side platforms for extra width. • Ramp and platform made with chequer plate

surface to ease loading and positioning of mini tractor.• Safety lock to prevent accidental lowering. • Model No. MT680• List Price £1499.95

Hydraulic Mini Tractor/Quad/Motorcycle Lift 700kg Capacity

• Min./Max. Height: 180/900mm.• Platform Size (W x L): 950 x 2250mm.• All steel construction with heavy-duty hydraulic ram.• Full width ramp and platform with chequer plate

surface to ease loading and positioning of vehicle.• Fitted with over-run guard at front of platform

and mechanical safety lock.• Model No. MT700• List Price £1599.95

inc VAT

exc VAT£109.95£131.94

OFFER PRICE

Model No.Size

(L x W x H)List Price Exc. VAT Inc. VAT

MS065 2700 x 1050 x 1550mm £219.95 £149.95 £179.94MS066 3450 x 1370 x 1900mm £269.95 £179.95 £215.94MS067 3450 x 1880 x 1900mm £319.95 £199.95 £239.94

NEW

• Made with 600D polyester Oxford waterproof material.

• Easy to assemble and use.• When shut can be locked

with a padlock (not included).• Free standing or can be bolted

to a hard surface (bolts not included).• Supplied with soft ground anchors.• Will fit trikes, ATVs and ride on lawn mowers.

• Motorcycle dolly holds a single motorcycle or sport bike with a side stand, weighingup to 565kgs.

• Easy manoeuvring around the workshop or garage.• Front and rear lever operated wedge gates allow for easy loading and unloading.• Five position side stand platform to fit varied length side stands.• Front/rear steel pins to keep the motorcycle on the dolly

during moving, and smooth rolling dual castor wheels.• Overall Dimensions (L x W x H): 2120 x 770 x 90mm.• Loading Track Dimensions (L x W x H): 2000 x 200 x 50mm.• Model No. MS063• List Price £179.95

£1199.94£1079.94

Model No. MS065

FREEMotorcycle Rear Lift

for MC450• Model No. MC450RL• List Price £34.95

Motorcycle Chain Alignment Tool

Motorcycle Piston RingCompressing Tool

6-8mm Carburettor JetWrench Set

• Double end wrench suitable for use with 6 & 8mm round jets.

• Single end wrenchfor use on 6mm hex jets.

• Model No. MS007• List Price £17.95

Motorcycle ForkSeal Drivers

• Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals.

• Hardened and tempered carbon steel, finished with zinc plating for corrosion resistance.

• Heavy knurled grip gives positive purchase when in use and limits risk of slip if hands are oily.

• Limits potential damage to the forks caused by using other methods.

Front/Rear Combination Stand

Heavy-Duty MotorcycleFront WheelChock

inc VAT

exc VAT£14.95£17.94

OFFER PRICE

NEW

NEW

inc VAT

exc VAT£19.95£23.94

OFFER PRICE

NEW

inc VAT

exc VAT£10.95£13.14

OFFER PRICE

NEW

inc VAT

exc VAT£239.95£287.94

OFFER PRICE

inc VAT

exc VAT£11.95£14.34

OFFER PRICE

NEW

inc VAT

exc VAT£49.95£59.94

OFFER PRICE

inc VAT

exc VAT£22.95£27.54

OFFER PRICE

inc VAT

exc VAT£59.95£71.94

OFFER PRICE

inc VAT

exc VAT£33.95£40.74

OFFER PRICE

NEW

Model No.

Seal Driver

List Price

Exc. VAT

Inc. VAT

MS052 33mm £59.95 £31.95 £38.34MS053 35-36mm £60.95 £31.95 £38.34MS054 39mm £61.95 £31.95 £38.34MS055 41mm £62.95 £31.95 £38.34MS056 43mm £63.95 £31.95 £38.34MS057 45mm £64.95 £31.95 £38.34MS058 46-47mm £65.95 £31.95 £38.34MS059 48mm £65.95 £33.95 £40.74MS060 49-50mm £67.95 £33.95 £40.74MS061 54mm £68.95 £33.95 £40.74

• One man bleeding/servicing of hydraulic brakes and clutches.

• The kit utilises a small non-return valveand two connector hoses that attach to the scooter or motorcycle bleed nipple.

• As the brake/clutch are bled the valve prevents the used fluid and air being drawn back into the system.


Motorcycle Brake Bleeder

9pc Motorcycle Fork Seal Driver Kit

• Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals.

• Hardened and tempered carbon steel, finished with zinc plating for corrosion resistance.

• Heavy knurled grip gives positive purchase when in use and limits risk of slip if hands are oily.


NEW

• Lifts and stabilises the front or rear of any dual sidedswing armed bike quickly and easily.

• Supplied with width and angle adjustable rubber support pads and front under fork supports and interchangeable handles.

• Model No. RPS5• List Price £79.95

Height Adjustable Front/RearCombination Stand

inc VAT



Mo

del

No

. MS

052

• Used to prevent piston ring damage while installing the cylinder head.

• Easily removed when cylinder is in place.• Tool supplied with four

rings ranging from Ø40-85mm.

• Will fit most engine sizes.


• Simple to use yet accurate tool for correct alignment of the chain and sprocket.

• Helps prevent wear to the chain and sprockets.


1ltr Motorcycle Portable Fuel Tank

• Useful must have item, when needing to remove fuel tank to perform maintenance on your motorcycle.

• Eliminates need to balance fuel tank in an awkward position.

• Features 1ltr tank, 1200mm hose, two hose clamps and on/off tap.


9pc Motorcycle WheelBearing Removal Kit

• For easy removal of wheel bearings.• Covers sizes 10-25mm so should cover

most popular motorcycles and ATVs.• Drift Shafts: 250, 400mm.• Assorted Seal Collets

Ø: 10, 12, 15, 17, 19, 20, 25mm.


• Fully adjustable to fit wheels Ø15-18".

• Min./Max.tyre width 110/130mm.

• Features a pivot clamp which locks the front wheel securely by the bike weight.

• Chock can be used free standing or fixed (fixings not included).

• Please note: Motorcycle must also be secured using tie-down straps.

• Model No. FPS7• List Price £99.95£65.94

NEW

NEW

NEW

• Supplied with width and angle adjustable rubber support pads and bobbin supports, front lifting pintype supports and interchangeable handles.

• All supports mountedon heavy-duty boxsection.

• Model No. RPS6• List Price £49.95


Sealey Group

01284 757500

01284 [email protected]

To see Sealey’s impressive full range of products browse online at www.sealey.co.uk

or request a copy.

Get your FREECatalogue

email

Web

*TR

X-S

TAR

, TR

X-T

S a

nd T

RX

-P tools

are

suita

ble

for

drivi

ng T

OR

X®

and T

OR

X P

LU

S®

fast

eners

resp

ect

ively

. TO

RX

®and T

OR

X P

LU

S®

are

regis

tere

d t

rad

em

ark

s o

f Acu

me

nt In

telle

ctu

al P

rop

ert

ies,

LL

C.

• Used to check and adjust the alignment ofthe lasers on Model No. MS070 MotorcycleWheel Laser Aligner.

• This unit will allow workshops to check and adjust in-house.

• Supplied with comprehensive instructions.• Model No. MS070CR• List Price £99.95


MotorcycleTools & Equipment

Motorcycle Wheel AlignmentTool

• Fast, simple and accurate alignment of rear wheel.

• Optimises vehicle performance and set up after installation or modification of the chain, sprockets, brakes or suspension components.

• This fully portable kit is also ideal for track-day set up or for the motorcycle enthusiast.


inc VAT


inc VAT

exc VAT£79.95£95.94

OFFER PRICE

Promotion valid from 1st September to 31st December 2012. Offers will be withdrawnwhen stock is sold. We reserve the right to change products and pricing at any time.Specifications and descriptions on this promotion are given in good faith butmay change without notice and do not form any part of a sale contract E & OE.

MotorcycleTools & Equipment

Visit your online store and download theFREE Sealey App today to view our latest catalogue and promotions on

your iPad or iPhone.

Your Local Dealer

Kempson Way, Suffolk Business Park,Bury St Edmunds, Suffolk IP32 7AR

£299.94

NEW

NEWCalibration Rig for MS070

• RE-CALIBRATION SERVICE: We offer a competitively priced calibration service and recommend the unit is returned to us if the unit becomes damaged or re-calibration is required.

• Contact our technical help line for further information on 01284 757505 and quote Model No. MS070CAL.


ARRIVING OCTOBER

ARRIVING OCTOBER

Calibration Chargefor MS070 MotorcycleWheel Alignment Tool

25pcCOOLING SYSTEM PRESSURE TEST KITS EOBD DIAGNOSTIC TOOLS Vehicle Service... · Promotion Code:...

Documents

Transcript of 25pcCOOLING SYSTEM PRESSURE TEST KITS EOBD DIAGNOSTIC TOOLS Vehicle Service... · Promotion Code:...