7/25/2019 25567

1/3

25567 version 1Page 1 of 3

Set and operate a manual feed edge-trimming machine to trim edgedpanels

Level 3

Credits 3

Purpose People credited with this unit standard are able to prepare to set and operate,set, and operate, a manual feed edge-trimming machine to trim edgedpanels.

Subfield urniture

Domain urniture !a"ing

Status #egistered

Status date 1$ %une 2&&$

Date version published 1$ %une 2&&$

Planned review date 31 'ecember 2&1(

Entry information )pen.

Accreditation *valuation of documentation and visit b+ / andindustr+.

Standard setting body SS!" 0ompeten

Accreditation and #oderation Action Plan A#AP" reference &173

his /!/P can be accessed at http44www.na.govt.n4framewor"4search4inde.do.

Special notes

1 his unit standard must be assessed against on-ob.

2 Personal protective euipment, appropriate to ob reuirements, is to be selected andused in accordance with wor"site policies and procedures and manufacturer8sinstructions.

ew ealand ualifications /uthorit+

7/25/2019 25567

2/3

25567 version 1Page 2 of 3

3 'efinitionsManufacturers instructionsare instructions provided b+ manufacturers ofsubstances, euipment, and machiner+ used in furniture ma"ing. hese instructionsma+ include details on safe and correct handling, use and storage of substancesand4or details on substance properties. *amples are labels on substancecontainers, product data sheets, and operator8s manuals.

Safe operating instructions 9:);s< are documented instructions attached to machineswhich detail reuirements for safe operation of the particular machine.Worksite policies and proceduresrefer to documented policies and to documented orother directions provided to staff. hese ma+ include, but are not limited to, wa+s ofmanaging health and safet+, environmental considerations, ualit+, and production,and must conform to legislation. *amples include standard operating procedures,compan+ health and safet+ plans, on-site briefings, and supervisor8s instructions.

Elements and performance criteria

Element $

Prepare to set and operate a manual feed edge-trimming machine to trim edged panels.

Performance criteria

1.1 %ob specifications are obtained and eplained in accordance with wor"sitepolicies and procedures.

#ange panel edges to be trimmed, timeframe.

1.2 *dged panels are obtained in accordance with ob specifications.

1.3 /dustment of machine is eplained in accordance with manufacturer8sinstructions.

#ange side trimmer, edge rounder.

1.( !aintenance reuirements are eplained in accordance with manufacturer8sinstructions.

#ange side trimmer, tables, round trimmer.

1.5 *nvironmental and safet+ reuirements are met in accordance with wor"sitepolicies and procedures.

#ange electrical power, lighting, ventilation, dust etraction fans.

Element %

:et a manual feed edge-trimming machine to trim edged panels.

Performance criteria

2.1:ide trimmer is set for trimming of edge tape in accordance with ob specifications andwor"site policies and procedures.

ew ealand ualifications /uthorit+

7/25/2019 25567

3/3

25567 version 1Page 3 of 3

2.2 *dge rounder is set to round edge tape in accordance with ob specifications.

2.3 est piece is run and chec"ed against ob specifications. /dustments are madeif reuired.

Element 3

)perate a manual feed edge-trimming machine to trim edged panels.

Performance criteria

3.1 !achine operation is in accordance with :);s.

3.2 )utput of machine is monitored to ensure trimmed edging meets obspecifications. /n+ out of specifications panels are replaced in accordance withwor"site policies and procedures.

3.3 *dged panels are trimmed in accordance with ob specifications.

3.( !achine and wor" area are made clean, clear, and safe in accordance withwor"site policies and procedures.

Please note

Providers must be accredited b+ /, or an inter-institutional bod+ with delegatedauthorit+ for ualit+ assurance, before the+ can report credits from assessment againstunit standards or deliver courses of stud+ leading to that assessment.

;ndustr+ raining )rganisations must be accredited b+ / before the+ can registercredits from assessment against unit standards.

/ccredited providers and ;ndustr+ raining )rganisations assessing against unit standardsmust engage with the moderation s+stem that applies to those standards.

/ccreditation reuirements and an outline of the moderation s+stem that applies to thisstandard are outlined in the /ccreditation and !oderation /ction Plan 9/!/P