Plastic Hinge Rotation Capacity of Reinforced Concrete Beams
254502~A Caravelle Quick Release Plastic Hinge Toilet …€¦ · Quick Release Plastic Hinge...
-
Upload
phungtuong -
Category
Documents
-
view
215 -
download
1
Transcript of 254502~A Caravelle Quick Release Plastic Hinge Toilet …€¦ · Quick Release Plastic Hinge...
Push metal toggle through pan hole. Realign handles and pull upwards while pushinglocking bush down into pan hole.
1
4
7
2 3
5
8
6
Loosely �x the mounting plate to the pan using theplastic washer and bolt so its position can still be adjusted.
Push the seat and hinge plate over the mountingplate.
Carefully remove the seat taking care not to movethe mounting plate. Fully tighten the bolts.
Clip the link plate over the �ush pipe.
Break o� handles �ush with locking bush. Trim excess with a pair of side cutters if required.
9
Adjust seat to desired position on pan.
Quick Release Plastic Hinge
IMPORTANT : Never use abrasive or harsh chemical cleaners. Wipe seat with warm soapy water to maintain surface �nish.
Installation Instructions
Lea�et No. 254502~APage 1
Push the link plate into position for marking. Mark 15mm from back of mounting block.
15mm
Quick Release Plastic Hinge
IMPORTANT : Never use abrasive or harsh chemical cleaners. Wipe seat with warm soapy water to maintain surface �nish.
Installation Instructions
Lea�et No. 254502~A
10 11
Replace link plate.
14 15
Trim and �t the cover plate if the connection plateis narrow.
Fit the cover plate if there is no connection plate.
Cut along marked line with a hack saw.Fitting of the seat will be made easier if a sharp knife is used to put a bevel on the cut edge.
Page 2
13
Slide seat into position over the mounting plate. Insert buttons into each side of hinge block. Ensure buttons are inserted parallel to pan.
16
Completed installation.
12
Two button options are available. Select suitable button for application.
Standard quick releasebutton - allows for removal of seat for cleaning
Optional vandal resistantbutton - prevents seatfrom being removed