25 Litre Process Tank and Rectifier: Features and Lab Demo
-
Upload
anokap-thailand -
Category
Documents
-
view
215 -
download
0
description
Transcript of 25 Litre Process Tank and Rectifier: Features and Lab Demo
25 LITRE (LAB / DEMO) ELECTROPOLISHING TANK & DC POWER SUPPLY
Anokap Solutions Co. Limited www.anokap.com [email protected]
HEATED ELECTROLYTIC PROCESS TANK
Characteristics:-
Dimensions:- External: (L) 400 (W) 500 x (H) 400 mm Internal: (L) 300 (W) 290 x (H) 300 mm Working Level: 270-280 mm Volume:- 25 – 27 Litres Process Envelope:- 250 x 240 x 230 mm (max) Capacity:- Approx 5 - 6 dm² (max) Heating:- 150 – 300 watt Temperature Control:- Digital LED Thermostat NTCH Sensor:- S/S, Silicon Cable NTCH Input:- 220 -230 VAC
Features:- See Below
Anokap’s range of chemical processing tanks & system features include:-
High Quality Plastic Polymers:- • Chemical Resistant & Compatibility • High Temperature Resistant
Modern Jointing Techniques & Dual Sided Welds for:-
• Create high strength & Durability • Minimising Deflection • Increased working life span • Encased supports
Standard Options:-
• Temperature Control (Basic Thermostat, PID PT100) • Level Control (Minimum, Working & High) • Combined Temperature & Level Control in a single unit • Heaters (S/S, Glass Porcelain or Teflon Sheathed) • Cooling (water or refrigerant) • Agitation (Air, Pump Inductor, Mechanical & Ultrasonic) • Extraction (Lip or Hood)
Power Supplies – Transformer Rectifiers & Remote Controls:-
• Solid State • Air Cooled Thyristor • Saturable Reactors • Oil Cooled & Hand or Motorised Regulator • High efficiency units (stepped & step less), • RFI shield & EMC regulated. • Available at all ratings including DC, AC & Pulse.
Engineering Considerations to Application & Overall Finish for:-
• Easy maintenance • Minimised Footprint • Clean ability
Versatile Detachable High Conductivity Contacts
• Mounted on high chemical and temperature resistant polymer • Machined plastic slides • High Power flexible cables & connectors • Rectangular Copper (99.9%) to maximise fixture surface contact • Standard & Self Cleaning “V” Block & Flight Systems available
Flexible & Adaptable Can be Converted / Retrofitted for almost an process Including:-
• Electropolishing • Electroplating • Anodising • Anodic Etching & Pickling • Electrolytic Cleaning
Manual & Automatic Process Systems
• Manual or Automatic System with full PLC integration available. • Installation, Commissioning, Training & Consultation available
Proprietary Products - Fixtures & Jigs
• Range of proprietary products for surface treatment processes. • Bespoke & standard titanium, copper & stainless steel fixtures available.
DC POWER SUPPLY (15V/30A-SOLID STATE)
Characteristics:-
Dimensions:- (L) 280 (W) 175 x (H) 160 mm Output:- Fully Variable 0-15 Volt Digital Meter:– Volt & Amp Input:- 220 -230 VAC
Features:-
High efficiency, low working temp Built in EMI filter, low ripple noise 100% full load burn-in test Short circuit & over load protection Universal AC input/ full range Installed with EMI filter, minimum wave