25 & 35 IS SERIES LASERS...LD.35.ISG available in beam Red Green LD.35.IS SPECIFICATIONS...
Transcript of 25 & 35 IS SERIES LASERS...LD.35.ISG available in beam Red Green LD.35.IS SPECIFICATIONS...
.BROCH 2001
25 & 35 IS SERIES LASERSINTRINSICALLY SAFELD.25.IS available in beamRed
LD.35.IS available in beam
LD.35.ISG available in beam
Red
Green
LD.35.IS
SPECIFICATIONS
Specifications subject to change without notice
The LD.25.IS, LD.35.IS and LD.35.ISG lasers enable
accurate construction and alignment of tunnels
where being driven by tunnel boring machines, drill
and blast, pipe jack or conventional hand
techniques. The units are intrinsically safe and
therefore do not require explosion proof
containment when working in gaseous
environments such as methane/air mixtures. The
units are waterproof, rugged and constructed from
stainless steel and brass. The units are based on
diode technology and powered by two ‘AA’ cells
(LD.25.IS) or two ‘C’ cells (LD..35.IS & LD.35.ISG).
When used with the MCE designed adjustable
gimbal, the lasers are easily installed on tunnel walls
and adjusted to a target.
Horizontal Gimbal I/S A.35.004.IS
Carry case A.35.006
Penta prism A.MCE.029
OPTIONS
APPLICATIONS
·Mining ·Safety
·Tunneling ·Manufacturing
·Industrial ·Power Boring
LD.25.IS LD.35.IS LD.35.ISGLength 221mm 230mm 230mm
Diameter 25mm 38 mm 38 mm
Weight 510g with batteries 890 g with batteries 890 g with batteries
Power supply 2 x 'AA' cell batteries 2 x 'C' cell batteries 2 x 'C' cell batteries
Operating time 50hrs 200hrs 60hrs
Laser Class 2M 2M 2M
Operating range 150m 150 m 200m
Beam diameter (at exit) 5 mm 5 mm 3mm
INTRINSICALLY SAFEExplosion-proof containment not
required. Works in Methane/Air
mixtures.
CERTIFICATE No.
IECEx SIM 13.0004
IEC 60079-0 : 2011Edition: 6.0Electrical apparatus for explosive
gas atmospheres
Part 0: General requirements
IEC 60079-11 : 2011Edition: 6.0Explosive atmospheres
Part 11: Equipment protection by
intrinsic safety “i”
LD.35.ISG
with optional
gimbal bracket
(A.35.004.IS)
FEATURES
Code: Ex ia I/IIC T3 IP55
LD.35.ISG
LD.25.IS
Code: Ex ia I/IIC T4 IP55
GSR Unit Wangara
Ph:[email protected] www.gsrlasrtools.com.au -
4058 9409 08 WA 6027 WA - Drive Prindiville 7 / 7
Tools Laser
For us email or call please information further