24” Marvel Professional High-Efficiency Dual Zone Wine CellarModel # MP24WD****

• Dynamic Cooling Technology™ delivers rapid cooldown and the industry’s best temperature stability

• Soft-close integrated hinge provides seamless zero clearance installation and a smooth, gentle close

• Professional styling: framed stainless steel door, sturdy full-length handle, sleek stainless shelf fronts and 4” adjustable stainless steel toe kick

• MARVEL Intuit™ Integrated Controls provide precise temperature management from 45°F to 62°F, allowing you to specifically set each cabinet temperature to your preference

• Two independently monitored zones to store your wine collection at separate temperatures

• Two-stage, soft blue theatre-style LED lighting and sophisticated midnight black interior

• Heavy-gauge wine racks are shaped to safely cradle each wine bottle

• Full-extension ball bearing smooth-glide shelf system prevents jarring

• Thermal-efficient cabinet ensures optimum preservation and energy efficiency while maximizing capacity

• Tinted, UV-resistant dual pane glass door protects wine from damaging ultra-violet light

• Audible and visual alarms signals when door is left ajar to protect wine integrity and energy use

• Vacation/Sabbath mode conserves energy during times when the unit is not in use and complies with Star-K requirements

• Door lock to protect your collection

• Height adjustment up to 1” with leveling legs

• Up to 2x more efficient than leading competitors

• 3-year warranty

Storage Capacity

Up to 40 bottles total

Storage Configuration

Upper zone: (3) 8-bottle smooth-glide full wine racks Lower zone: (1) 8-bottle smooth-glide full wine rack and (2) 4-bottle smooth-glide half-depth wine racks

Product Dimensions

23 ⅞” W x 33¾” H (minimum) x 25⅝” D(including handle)

Finish/Door Options

Stainless Steel Wood Overlay(Panel Ready)

Ordering DetailsStainless Frame, Glass Door With Lock, Integrated Right Hinge

MP24WDG4RS

Stainless Frame, Glass Door With Lock, Integrated Left Hinge

MP24WDG4LS

Panel Overlay Frame Ready Glass Door, Integrated Right Hinge With lock

MP24WDF4RP

Panel Overlay Frame Ready Glass Door, Integrated Left Hinge With lock

MP24WDF4LP

No panel installation kit required.

Dynamic Cooling Technology™ delivers rapid cool down and the industry’s best temperature stabilityThe distinctive Marvel design features a thermal-efficient cabinet and door combined with Dynamic Cooling Technology™ for superior temperature stability, faster cooling times and speedy temperature recovery even with high frequency.

Front SideFront

ForcedAir Fan

Evaporator Plate

Return Air Intake

Front SideFront

ForcedAir Fan

Evaporator Plate

Return Air Intake

Width 23 ⅞"

Interior Finish Black

CapacityUp to 20 wine bottlesUp to 162 12-oz cans

Shelving SystemSide Mount

Bottle shape wire

Shelf Fronts Stainless Steel

Other Storage

Interior Lighting 2 LED Pods

Toe Grill Finish Stainless Steel

Hinge Soft Close Integrated Hinge

Handle Professional

Control Type Intuit™

Temperature Range 34° - 42° F

Lock Yes

Electrical Requirements 120V / 60Hz / 15A

Length of Power Cord 5'

Product Dimensions 23⅞" W x 33¾" H x 21½" D

Depth to Front of Door 23 23/32"

Depth to Handle 26 7/32"

Depth with door at 90° 46 13/32"

Shipping Weight 160 lbs

Finishes SS, O

Vacation / Sabbath Mode

Yes

Agency Approvals CSA

Energy Star Certified NA

Finishes Key

SS = Stainless SteelO = Overlay

7

"F"

"D"

"E"

"H"

"J"

"G"

PRODUCT DIMENSIONS

211⁄2"(54.6 cm)

1"(2.5 cm)

Figure 6

PRODUCT DATA

MODELELECTRICAL

REQUIREMENTS #PRODUCTWEIGHT

MP15WSG 115V/60Hz/15A 105 lbs(47.6 kg)

MP15WSF 115V/60Hz/15A 105 lbs(47.6 kg)

MP24**G 115V/60Hz/15A 140 lbs(63.6 kg)

MP24**F 115V/60Hz/15A 140 lbs(63.6 kg)

* Depth dimension of rough-in opening may vary depend-ing on each individual installation. To recess entire door "F" dimension plus 1" (2.5 cm) for thickness of power cord plug is required.

** Minimum rough-in opening required is to be larger than the adjusted height of the cabinet.

# A grounded 15 amp dedicated circuit is required. Follow all local building codes when installing electrical and appli-ance.

APPLIES TO THE FOLLOWING MARVEL MODELSMP15WS MP24WS

MP24WD

"A"

"B"

"C"

Cabinet Dimensions

"D" "E" "F"

23 7⁄8”(60.7 cm)

33 3⁄4” to 34 3⁄4”(85.7 to 88.3 cm)

23 23⁄32”(60.2 cm)

“G” “H” “J”

26 7⁄32”(66.6 cm)

46 13⁄32”(117.9 cm)

26 7⁄16”(67.2 cm)

24" Rough-In Dimensions

"A" "B" "C"

24” (61 cm)

**34" to 35"(86.4 to 88.9 cm)

24”(61 cm)

Overlay Panels

For comprehensive installation instructions, please visit www.marvelrefrigeration.com

13

Figure 10a

OVERLAY DOOR PANEL INSTALLATION

Step 2: Remove the door gasketWith the door laying on a flat surface and starting at a corner of the door remove the magnetic door gasket from the interior side of the door, see Figure 10. Set the gasket aside on a flat surface.

There are 10 holes in the gasket retainer extrusions, (3 on each side and 2 at the top and bottom which are used to fasten the panel to the front of the door. The screws are provided in the literature pack.

Figure 10

Overlay panel flush with top

of door.

Holes in gasket

retainer.

Magnetic Gasket remove starting at a corner, grasp and pull away from the door.

Step 3: Cut and drill the overlay panelDepending on your model cut the overlay door panel to the dimensions shown in Figures 11 to 18.

Overlay panel to be centered on width of door.

Figure 9

Press and hold down this tab on the wire connector and pull the connector apart.

16

Counter bore lock holeon back side.

Figure 19a

#10 x 1⁄2"screw

Figure 19

Hin

ge s

ide

of d

oor

1⁄2" (13 mm) diameter drill through door panel, from other side (see detail above) 13⁄16" (20.5 mm) counter bore, 7⁄16" (11 mm) deep.

17⁄32"(13.7 mm)

31⁄2"(89 mm)

OVERLAY DOOR PANEL INSTALLATION

Step 5: Assemble lock partsTwo (2) lock extensions are provided with the lock. Use the longer extension for 3⁄4" thick overlay panels and the shorter one for 5⁄8" thick overlay panels. Assemble the lock exten-sion, cam stop washer, spring washer, and set screw to the lock as shown in Figure 20 and 21.

Install this lock assembly into the lock hole in the overlay panel and secure with the retaining nut on the back side with a 15 mm socket and ratchet. Make sure the key slot in the front of the lock is vertical.

Step 6: Install lock camAttach the lock cam to the back of the lock assembly with the phillips head screw provided. Orient the lock cam verti-cally when installing on the lock.

Step 4: Assemble the panel to the doorThe preferred method of attaching the panel to the door is to clamp the panel to the door so it cannot move while drilling the screw pilot holes. Use bar clamps or "C" clamps with pads on the clamping surfaces that will not mar the panel or the door. The custom overlay panel should be flush with the top of the door and centered along the width of the door. See Figure 10a. Drill holes through the gasket extrusion using the 10 holes as pilot holes. Use the drill size from the chart in Table "C", being careful not to drill through the front surface of the panel, drill no deeper than 1⁄2" (12.7 mm) deep. If the overlay panel is thinner than 5⁄8" (16 mm) thick shorter screws will have to be obtained. Fasten the panel to the door with the 10 screws provided in the literature pack. (See Figure 19a). Remove the clamps and replace the gasket in the gasket extrusion channels of the door. Some force may be required to seat the gasket into the channels. Be sure the gasket corners are seated properly.

Material Type #10 Wood Screw Hardwood 1⁄8" (3.2 mm) Diameter. Pilot HoleSoftwood 7⁄64 (2.8 mm) Diameter. Pilot Hole

Table C

16

Counter bore lock holeon back side.

Figure 19a

#10 x 1⁄2"screw

Figure 19

Hin

ge s

ide

of d

oor

1⁄2" (13 mm) diameter drill through door panel, from other side (see detail above) 13⁄16" (20.5 mm) counter bore, 7⁄16" (11 mm) deep.

17⁄32"(13.7 mm)

31⁄2"(89 mm)

OVERLAY DOOR PANEL INSTALLATION

Step 5: Assemble lock partsTwo (2) lock extensions are provided with the lock. Use the longer extension for 3⁄4" thick overlay panels and the shorter one for 5⁄8" thick overlay panels. Assemble the lock exten-sion, cam stop washer, spring washer, and set screw to the lock as shown in Figure 20 and 21.

Install this lock assembly into the lock hole in the overlay panel and secure with the retaining nut on the back side with a 15 mm socket and ratchet. Make sure the key slot in the front of the lock is vertical.

Step 6: Install lock camAttach the lock cam to the back of the lock assembly with the phillips head screw provided. Orient the lock cam verti-cally when installing on the lock.

Step 4: Assemble the panel to the doorThe preferred method of attaching the panel to the door is to clamp the panel to the door so it cannot move while drilling the screw pilot holes. Use bar clamps or "C" clamps with pads on the clamping surfaces that will not mar the panel or the door. The custom overlay panel should be flush with the top of the door and centered along the width of the door. See Figure 10a. Drill holes through the gasket extrusion using the 10 holes as pilot holes. Use the drill size from the chart in Table "C", being careful not to drill through the front surface of the panel, drill no deeper than 1⁄2" (12.7 mm) deep. If the overlay panel is thinner than 5⁄8" (16 mm) thick shorter screws will have to be obtained. Fasten the panel to the door with the 10 screws provided in the literature pack. (See Figure 19a). Remove the clamps and replace the gasket in the gasket extrusion channels of the door. Some force may be required to seat the gasket into the channels. Be sure the gasket corners are seated properly.

Material Type #10 Wood Screw Hardwood 1⁄8" (3.2 mm) Diameter. Pilot HoleSoftwood 7⁄64 (2.8 mm) Diameter. Pilot Hole

Table C

16

Counter bore lock holeon back side.

Figure 19a

#10 x 1⁄2"screw

Figure 19

Hin

ge s

ide

of d

oor

1⁄2" (13 mm) diameter drill through door panel, from other side (see detail above) 13⁄16" (20.5 mm) counter bore, 7⁄16" (11 mm) deep.

17⁄32"(13.7 mm)

31⁄2"(89 mm)

OVERLAY DOOR PANEL INSTALLATION

Step 5: Assemble lock partsTwo (2) lock extensions are provided with the lock. Use the longer extension for 3⁄4" thick overlay panels and the shorter one for 5⁄8" thick overlay panels. Assemble the lock exten-sion, cam stop washer, spring washer, and set screw to the lock as shown in Figure 20 and 21.

Install this lock assembly into the lock hole in the overlay panel and secure with the retaining nut on the back side with a 15 mm socket and ratchet. Make sure the key slot in the front of the lock is vertical.

Step 6: Install lock camAttach the lock cam to the back of the lock assembly with the phillips head screw provided. Orient the lock cam verti-cally when installing on the lock.

Step 4: Assemble the panel to the doorThe preferred method of attaching the panel to the door is to clamp the panel to the door so it cannot move while drilling the screw pilot holes. Use bar clamps or "C" clamps with pads on the clamping surfaces that will not mar the panel or the door. The custom overlay panel should be flush with the top of the door and centered along the width of the door. See Figure 10a. Drill holes through the gasket extrusion using the 10 holes as pilot holes. Use the drill size from the chart in Table "C", being careful not to drill through the front surface of the panel, drill no deeper than 1⁄2" (12.7 mm) deep. If the overlay panel is thinner than 5⁄8" (16 mm) thick shorter screws will have to be obtained. Fasten the panel to the door with the 10 screws provided in the literature pack. (See Figure 19a). Remove the clamps and replace the gasket in the gasket extrusion channels of the door. Some force may be required to seat the gasket into the channels. Be sure the gasket corners are seated properly.

Material Type #10 Wood Screw Hardwood 1⁄8" (3.2 mm) Diameter. Pilot HoleSoftwood 7⁄64 (2.8 mm) Diameter. Pilot Hole

Table C15

! CAUTION

13⁄16"(3 cm)

15⁄32"(2.9 cm)

Figure 15Left Hand Hinged Door

24" (61 cm) wide appliance

Weight of overlay door panel must not exceed 10 pounds (4.5 kg) for a glass door model.

Figure 17Right Hand Hinged Door

24" (61 cm) wide appliance

Clearance for hinge

at top and bottom

Clearance for screw head,

4 places

Figure 16Left Hand Hinged Door

24" (61 cm) wide appliance

Figure 18Right Hand Hinged Door

24" (61 cm) wide appliance

Clearance for hingeat top and bottom

Clearance for screw head, 4 places

Hin

ge s

ide

of d

oor

Top of door Top of door

Hin

ge s

ide

of d

oor

OVERLAY DOOR PANEL INSTALLATION

This sidefacing interior

This sidefacing interior

233⁄4"(60.3 cm)

1⁄4"(6 mm)Deep

233⁄4"(60.3 cm) 1⁄4"

(6 mm)Deep

1" (2.5 cm) diameter x 1⁄4" (6 mm) deep

4 places

11⁄2"(3.8 cm)typical

111⁄16"(4.3 cm)

1" (2.5 cm) diameter x 1⁄4" (6 mm) deep4 places

47⁄8"(12.4 cm)

31⁄8"(7.9 cm)

2"(5.1 cm)

311⁄16"(9.4 cm)

311⁄16"(9.4 cm)11⁄2"

(3.8 cm)typical

111⁄16"(4.3 cm)

327⁄32"(9.8 cm)

1⁄4" (6 mm)radius ispermissible

14"(35.6 cm)

13⁄16"(3 cm)

31⁄8"(7.9 cm)

3011⁄32"(77.1 cm)3011⁄32"

(77.1 cm)

31⁄8"(7.9 cm)

41⁄8"(10.5 cm)

31⁄8"(7.9 cm)

13⁄4"(4.4 cm)

31⁄8"(7.9 cm)

2"(5.1 cm)

41⁄8"(10.5 cm)

1⁄4" (6 mm)radius ispermissible

14"(35.6 cm)

47⁄8"(12.4 cm)

327⁄32"(9.8 cm)

31⁄8"(7.9 cm)

13⁄4"(4.4 cm)

15⁄32"(2.9 cm)

15

! CAUTION

13⁄16"(3 cm)

15⁄32"(2.9 cm)

Figure 15Left Hand Hinged Door

24" (61 cm) wide appliance

Weight of overlay door panel must not exceed 10 pounds (4.5 kg) for a glass door model.

Figure 17Right Hand Hinged Door

24" (61 cm) wide appliance

Clearance for hinge

at top and bottom

Clearance for screw head,

4 places

Figure 16Left Hand Hinged Door

24" (61 cm) wide appliance

Figure 18Right Hand Hinged Door

24" (61 cm) wide appliance

Clearance for hingeat top and bottom

Clearance for screw head, 4 places

Hin

ge s

ide

of d

oor

Top of door Top of door

Hin

ge s

ide

of d

oor

OVERLAY DOOR PANEL INSTALLATION

This sidefacing interior

This sidefacing interior

233⁄4"(60.3 cm)

1⁄4"(6 mm)Deep

233⁄4"(60.3 cm) 1⁄4"

(6 mm)Deep

1" (2.5 cm) diameter x 1⁄4" (6 mm) deep

4 places

11⁄2"(3.8 cm)typical

111⁄16"(4.3 cm)

1" (2.5 cm) diameter x 1⁄4" (6 mm) deep4 places

47⁄8"(12.4 cm)

31⁄8"(7.9 cm)

2"(5.1 cm)

311⁄16"(9.4 cm)

311⁄16"(9.4 cm)11⁄2"

(3.8 cm)typical

111⁄16"(4.3 cm)

327⁄32"(9.8 cm)

1⁄4" (6 mm)radius ispermissible

14"(35.6 cm)

13⁄16"(3 cm)

31⁄8"(7.9 cm)

3011⁄32"(77.1 cm)3011⁄32"

(77.1 cm)

31⁄8"(7.9 cm)

41⁄8"(10.5 cm)

31⁄8"(7.9 cm)

13⁄4"(4.4 cm)

31⁄8"(7.9 cm)

2"(5.1 cm)

41⁄8"(10.5 cm)

1⁄4" (6 mm)radius ispermissible

14"(35.6 cm)

47⁄8"(12.4 cm)

327⁄32"(9.8 cm)

31⁄8"(7.9 cm)

13⁄4"(4.4 cm)

15⁄32"(2.9 cm)