24/08/2013hb Topology Emulators with GNS3. Agenda About me What is GNS3? Problem of other simulators...
-
Upload
berenice-chase -
Category
Documents
-
view
246 -
download
2
Transcript of 24/08/2013hb Topology Emulators with GNS3. Agenda About me What is GNS3? Problem of other simulators...
24/08/2013hb
Topology Emulatorswith
GNS3
2
Agenda
•About me
•What is GNS3?
•Problem of other simulators
• Installing GNS3 & Configure
•Adding IOS Image
•Adding hosts to your Topologies
3
About me
• Presenter: VAN Somery
• Company: Sotelco(Beeline)
• Position: NOC Helpdesk Specialist
• Education: PNC (2007-2009), UP (2010-2012)
• Tel: 855 90 221 053
• E-mail: [email protected]
4
Problem of other simulators
• It is difference from real device
• It is designed to fit limit device
• It cannot communicate with real network
• It cannot capture the network processing
• It had limited some command
•Not real Image Use
• It helpful for CCNP Level
5
What is GNS3?
GNS3 is an open source software that simulate
complex networks while being as close as possible
from the way real networks perform, all of this
without having dedicated network hardware such as
routers and switches.
6
Installing &Configure GNS3
7
Demo
Demo Installation and Configuration
8
Installing &Configure GNS3
9
Adding IOS Image
10
Adding hosts to your Topologies
In Start Menu=> Type VPCS (If you have install it)
11
Adding hosts to your Topologies
12
Conclusion & Reference
•Conclusion:
•Reference:http://www.gns3.net/http://gns3vault.comwww.google.com
13
Question and Answer
Do you have any questions?
Thank you for paying attention!