22 Evaluation of OBR for strain measurements in blade testing...Autoformas Diapasitiva 1 de ID...
3
Alfredo Güemes 1 Antonio Fernandez-Lopez 1 Alfredo Criado 2 Miguel Riezu 2 Asier Oiz 3 1 )Politechnic University of Madrid, Department of Aeronautics 2 )Gamesa 3 )CENER Evaluation of OBR for strain measurements in blade testing.
Transcript of 22 Evaluation of OBR for strain measurements in blade testing...Autoformas Diapasitiva 1 de ID...
Alfredo Güemes1
Antonio Fernandez-Lopez1
Alfredo Criado2 Miguel Riezu2
Asier Oiz3
1)Politechnic University of Madrid, Department of Aeronautics 2)Gamesa 3)CENER
Evaluation of OBR for strain measurements in blade
testing.
Overview
DIAPOSITIVA 1
• Duration: 2008-2009.
• Project: Private research contract.
• Partners: Gamesa Innovation & Technologies
• UPM responsibilities: The main aim of the project was to validate the
OBR technology for strain measurement, comparing blade strains
obtained during a static test with this technique to those recorded with
Strain Gauges, as well as developing simple retrofit methods for fibre
installation.
DIAPOSITIVA 2
OBR PRINCIPLE
LE groove and Strain Gauge
Blade transversal view fiber deployment