21.5” (54cm) FHD LED LCD TV
Transcript of 21.5” (54cm) FHD LED LCD TV
Instruction Manual
21.5” (54cm) FHD LED LCD TV / GVA22FLEDA
ContentsPreface 3
Safety Precautions 3
In the carton 5
Front Back Connections of LED 6
TV Installation Drawings 7
Power Cord Connection 7
Antennas Connection 7
HDMI Connection 8
VGA Connection 8
COAX Connection 9
USB Connection 9
AV Connection 10
YPbPr Connection 10
Remote Control 11
Remote Control Instructions in TV/Media mode 11
Remote Control Setup 13
Menu Operation 14
Installation Guide 14
CHANNEL Menu 14
PICTURE Menu 17
SOUND Menu 19
TIME Menu 20
OPTION Menu 21
LOCK Menu 22
Hotel Setting 23
Input Source 24
EPG and Channel List Menu 25
Multimedia (Media) Menu 26
PVR Menu 32
Troubleshooting and Advise 28
Specifications 39
3
Preface
Safety Precautions
Thank you for buying this TV ! Please read this manual thoroughly before operating the TV. Make sure the TV was not damaged in transit. Should the TV is damaged, do no install it and contact your dealer. Check that you have all the accessories according to the model.
2
1.PREFACE
Thank you for buying this TV ! Please read this manual thoroughly before operating the TV. Make sure the TV was not damaged in transit. Should the TV is damaged, do no install it and contact your dealer. Check that you have all the accessories according to the model.
2.SAFETY PRECAUTIONS
Power cord and cables must be properly routed and protected to prevent
people from stepping on them and causing the TV to fall.
Put the TV on a stable surface.
Do not place any material on the TV.
Do not block or cover the ventilation openings on the
If you have a wall mount, check that it is steady.
TV.
Minimum distances
10cm
20cm
10cm 5cm
Do not use the TV with fixtures other than those provided or
suggested by the manufacturer.
Keep the TV dry and away from humidity.
Put the TV on stable surface.
Do not place any material on the TV.
Do not use the TV with fixtures other than those provided or suggested by the manufacturer.
Do not block or cover the ventilation openings on theIf you have a wall mount, check that it is steady.TV.
Power cord and cables must be properly routed and protected to prevent people from stepping on them and causing the TV to fall.
Keep the TV dry and away from humidity.
4
3
Keep the TV away from heat sources.
Unplug the before cleaning it. Do not use solvent or liquid
clean the TV.
TV to
Only clean the TV with a soft and dry cloth.
Unplug the TV during lightening storms or when unused for long
periods of time.
In case of troubleshooting, do not use spare parts other than
those suggested by the manufacturer. Using inadequate spare
parts can lead to electric shocks, short-circuits fire or other
incidents.
1.where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operable;
2.A warning that batteries (battery pack or batteries installed) shall not be exposed to excessive
heat such as sunshine, fire or the like.
3.A warning that an apparatus with CLASS I construction shall be connected to a MAINS socket
outlet with a protective earthing connection.
IMPORTANT INFORMATION
If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due
to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
· Using cabinets or stands recommended by the manufacturer of the television.
· Only using furniture that can safely support the television.
· Ensuring the television is not overhanging the edge of the supporting furniture.
· Not placing the television on tall furniture (for example, cupboards or bookcases) without
anchoring both the furniture and the television to a suitable support.
· Not standing the televisions on cloth or other materials placed between the television and
supporting furniture.
· Educating children about the dangers of climbing on furniture to reach the television or its controls.
Keep the TV away from heat sources.
Unplug the before cleaning it. Do not use solvent or liquid to clean the TV. Only clean the TV with a soft and dry cloth.
In case of troubleshooting, do not use spare parts other than those suggested by the manufacturer. Using inadequate spareparts can lead to electric shocks, short-circuits fire or other incidents.
Unplug the TV during lightening storms or when unused for long periods of time.
1. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable;
2. A warning that batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
3. A warning that an apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection.
IMPORTANT INFORMATION
• If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
• Using cabinets or stands recommended by the manufacturer of the television.
• Only using furniture that can safely support the television.
• Ensuring the television is not overhanging the edge of the supporting furniture.
• Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support.
• Not standing the televisions on cloth or other materials placed between the television and supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the television or its controls.
Safety Precautions
5
In the carton
4
3. IN THE CARTON
Remote Control
1.5V
1.5V
AAA Batteries
TV SET
USER'S MANUAL
User's Manual
Adapter & Power Cord
TV SET Remote Control
4
3. IN THE CARTON
Remote Control
1.5V
1.5V
AAA Batteries
TV SET
USER'S MANUAL
User's Manual
Adapter & Power Cord
Adaptor & Power Cord AAA Batteries
4
3. IN THE CARTON
Remote Control
1.5V
1.5V
AAA Batteries
TV SET
USER'S MANUAL
User's Manual
Adapter & Power Cord
User’s Manual
6
Front & Back Connections of LEDFront View(Picture are for reference only.)
(The sample is subject to the real product.)
4. FRONT & BACK CONNECTIONS OF LED
Back View and Control Connections
5
: Connect to a headphone set.
9
10
1.DC IN: DC input socket.
USB: Connect to the External drive.
. COMPONENT IN: Connect the YPbPr output
jack of DVD or VCR.
7
.
. COAX:
AV IN Connect the Video Audio output jack
of DVD or VCR.
2.
3. HDMI1/HDMI2: Connect the HDMI output jack
of DVD.
4. VGA: Connect the PC-RGB output jack of PC.
5. PC AUDIO : Connect the right Audio out put jack
of PC.
6
. RF IN: Connect the antenna.
8
Connect the audio amplifier.
. : /
COAX HDMI2VIDEO L R
AV IN
HDMI1 VGA AUDIO Y Pb Pr
COMPONENT INPC IN
RF IN
1 2 3 4 5 6 7 8 310
USBDC IN
9
1. Press“SOURCE”to select the input source.
2. Press “MENU”to bring up the main menu on the screen.
3. Press“CH+”or “CH-” .
4. Press“VOL+”or “VOL-”to increase or decrease the sound level.
5. Press“POWER” button to turn standby mode on or off.
6. .
7. .
to change channels
ON/OFF LED Indicator: Shows red in standby mode and green while your TV is turned on
IR Sensor: Infrared sensor for the remote control
Front View
1. Press“SOURCE”to select the input source.
2. Press “MENU”to bring up the main menu on the screen.
3. Press“CH+”or “CH-” to change channels .
4. Press“VOL+”or “VOL-”to increase or decrease the sound level.
5. Press“POWER” button to turn standby mode on or off.
6. ON/OFF LED Indicator: Shows red in standby mode and green while your TV is turned on.
7. IR Sensor: Infrared sensor for the remote control.
Back View and Control Connections
4. FRONT & BACK CONNECTIONS OF LED
Back View and Control Connections
5
: Connect to a headphone set.
9
10
1.DC IN: DC input socket.
USB: Connect to the External drive.
. COMPONENT IN: Connect the YPbPr output
jack of DVD or VCR.
7
.
. COAX:
AV IN Connect the Video Audio output jack
of DVD or VCR.
2.
3. HDMI1/HDMI2: Connect the HDMI output jack
of DVD.
4. VGA: Connect the PC-RGB output jack of PC.
5. PC AUDIO : Connect the right Audio out put jack
of PC.
6
. RF IN: Connect the antenna.
8
Connect the audio amplifier.
. : /
COAX HDMI2VIDEO L R
AV IN
HDMI1 VGA AUDIO Y Pb Pr
COMPONENT INPC IN
RF IN
1 2 3 4 5 6 7 8 310
USBDC IN
9
1. Press“SOURCE”to select the input source.
2. Press “MENU”to bring up the main menu on the screen.
3. Press“CH+”or “CH-” .
4. Press“VOL+”or “VOL-”to increase or decrease the sound level.
5. Press“POWER” button to turn standby mode on or off.
6. .
7. .
to change channels
ON/OFF LED Indicator: Shows red in standby mode and green while your TV is turned on
IR Sensor: Infrared sensor for the remote control
Front View
1. DC IN: DC Input socket.
2. USB: Connect to the External drive.
3. HDMI1/HDMI2: Connect the HDMI output jack of DVD.
4. VGA: Connect the PC-RGB output jack of DVD.
5. PC AUDIO: Connect the right Audio output jack of PC.
6. COMPONENT IN: Connect the YPbPr output jack of DV D or VCR.
7. RF IN: Connect the antenna.
8.
4. FRONT & BACK CONNECTIONS OF LED
Back View and Control Connections
5
: Connect to a headphone set.
9
10
1.DC IN: DC input socket.
USB: Connect to the External drive.
. COMPONENT IN: Connect the YPbPr output
jack of DVD or VCR.
7
.
. COAX:
AV IN Connect the Video Audio output jack
of DVD or VCR.
2.
3. HDMI1/HDMI2: Connect the HDMI output jack
of DVD.
4. VGA: Connect the PC-RGB output jack of PC.
5. PC AUDIO : Connect the right Audio out put jack
of PC.
6
. RF IN: Connect the antenna.
8
Connect the audio amplifier.
. : /
COAX HDMI2VIDEO L R
AV IN
HDMI1 VGA AUDIO Y Pb Pr
COMPONENT INPC IN
RF IN
1 2 3 4 5 6 7 8 310
USBDC IN
9
1. Press“SOURCE”to select the input source.
2. Press “MENU”to bring up the main menu on the screen.
3. Press“CH+”or “CH-” .
4. Press“VOL+”or “VOL-”to increase or decrease the sound level.
5. Press“POWER” button to turn standby mode on or off.
6. .
7. .
to change channels
ON/OFF LED Indicator: Shows red in standby mode and green while your TV is turned on
IR Sensor: Infrared sensor for the remote control
Front View
: Connect to a headphone set.
9. COAX: Connect the audio amplifier.
10. AV IN: Connect the Video/Audio output jack of DVD or VCR.
7
TV Installation DrawingsPower Cord Connection
DC12V IN
5. TV INSTALLTION DRAWINGS
75 OHMANTENNAPLUG
POWER PLUG OFANTENNAAMPLIFIER
OUTDOORANTENNAAMPLIFIER
VHF ANTENNA UHF ANTENNA
INDOORANTENNAAMPLIFIER
6
Power Cord Connection
Antennas Connection
- Connect the power cord correctly as shown.
- Press the POWER switch of your LED TV to switch on the LED TV.
The power indicator on the front panel lights up in Green or Blue.
RF IN
To ensure good picture and sound, TV antenna system needs to be installed. The antenna system as
Shown can be soured from TV equipment shops, which will provide service for correct installation
and connection. After installation, insert the 75-ohm antenna plug into the antenna jack as shown.
DC12V IN
5. TV INSTALLTION DRAWINGS
75 OHMANTENNAPLUG
POWER PLUG OFANTENNAAMPLIFIER
OUTDOORANTENNAAMPLIFIER
VHF ANTENNA UHF ANTENNA
INDOORANTENNAAMPLIFIER
6
Power Cord Connection
Antennas Connection
- Connect the power cord correctly as shown.
- Press the POWER switch of your LED TV to switch on the LED TV.
The power indicator on the front panel lights up in Green or Blue.
RF IN
To ensure good picture and sound, TV antenna system needs to be installed. The antenna system as
Shown can be soured from TV equipment shops, which will provide service for correct installation
and connection. After installation, insert the 75-ohm antenna plug into the antenna jack as shown.
- Connect the power cord correctly as shown.- Press the POWER switch of your LED TV to switch on the LED TV. The power indicator on the front panel lights up in Green or Blue.
Antennas Connection
To ensure good picture and sound, TV antenna system needs to be installed. The antenna system as shown can be soured from TV equipment shops, which will provide service for correct installation and connection. After installation, insert the 75-ohm antenna plug into the antenna jack as shown.
8
HDMI Connection
HDMI1 VGA AUDIO Y Pb Pr
COMPONENT INPC IN
RF INUSBDC IN
HDMI1 VGA AUDIO Y Pb Pr
COMPONENT INPC IN
RF INUSBDC IN
7
The HDMI input connection enables the digital transfer of audio/video/control signals through one
cable only.
TV Back
Audio Cable
TV Back
HDMI Connection
VGA Connection
TV Back
VGA Cable
Connect the RGB output of the PC to the VGA jack on the set. Connect the AUDIO output of the
PC to the PC AUDIO jack on the set . Select the VGA input source with using SOURCE button on
the remote control.
COAX HDMI2VIDEO L R
AV IN
HDMI Cable
DVD or VCR
DVD or VCR Back
HDMI Cable
DVD or VCR
DVD or VCR Back
The HDMI input connection enables the digital transfer of audio/video/control signals through one cable only.
VGA Connection
Connect the RGB output of the PC to the VGA jack on the set. Connect the AUDIO output of the PC to the PC AUDIO jack on the set . Select the VGA input source with using SOURCE button on the remote control.
HDMI1 VGA AUDIO Y Pb Pr
COMPONENT INPC IN
RF INUSBDC IN
HDMI1 VGA AUDIO Y Pb Pr
COMPONENT INPC IN
RF INUSBDC IN
7
The HDMI input connection enables the digital transfer of audio/video/control signals through one
cable only.
TV Back
Audio Cable
TV Back
HDMI Connection
VGA Connection
TV Back
VGA Cable
Connect the RGB output of the PC to the VGA jack on the set. Connect the AUDIO output of the
PC to the PC AUDIO jack on the set . Select the VGA input source with using SOURCE button on
the remote control.
COAX HDMI2VIDEO L R
AV IN
HDMI Cable
DVD or VCR
DVD or VCR Back
HDMI Cable
DVD or VCR
DVD or VCR Back
TV Installation Drawings
9
COAX Connection
HDMI1 VGA AUDIO Y Pb Pr
COMPONENT INPC IN
RF INUSBDC IN
COAX HDMI2VIDEO L R
AV IN
8
COAX Cable
COAX
the audio amplifier back
Audio amplifier
Connect to Audio Amplifier device to the COAX output jack on the TV.
USB Port
Insert the USB flash drive to the USB port. Select USB channel source via the SOURCE button
on the remote control.
TV Back
TV Back
COAX Connection
USB Connection
Connect to Audio Amplifier device to the COAX output jack on the TV.
USB Connection
Insert the USB flash drive to the USB port. Select USB channel source via the SOURCE buttonon the remote control.
HDMI1 VGA AUDIO Y Pb Pr
COMPONENT INPC IN
RF INUSBDC IN
COAX HDMI2VIDEO L R
AV IN
8
COAX Cable
COAX
the audio amplifier back
Audio amplifier
Connect to Audio Amplifier device to the COAX output jack on the TV.
USB Port
Insert the USB flash drive to the USB port. Select USB channel source via the SOURCE button
on the remote control.
TV Back
TV Back
COAX Connection
USB Connection
TV Installation Drawings
10
AV Connection
HDMI1 VGA AUDIO Y Pb Pr
COMPONENT INPC IN
RF INUSBDC IN COAX HDMI2VIDEO L R
AV IN
9
Connect the VIDEO and AUDIO output jack of the DVD or VCR to the VIDEO jacks on the TV set
using the RCA cable. Match the jack colors: Video is yellow, Audio left is white, and Audio right is red.
Select the AV input source via the SOURCE button on the remote control.
TV Back
Video cable
DVD or VCR back
DVD or VCR
PrPbY L R
DVD or VCR
DVD or VCR Back
YPbPr Cable
Connect the YPbPr output of the DVD or VCR to the YPbPr input on the TV set. Connect the Audiooutput of the DVD or VCR to the Audio input jacks on the TV set using the RCA cable.
Match the jacks colors : Y is green, Pb is blue, Pr is red, Audio left is white and Audio right is red. Select Component input source via the SOURCE button on the remote control.
Audio Cable
AV Connection
YPbPr Connection
TV BackTV Back
COAX HDMI2VIDEO L R
AV IN
Connect the VIDEO and AUDIO output jack of the DVD or VCR to the VIDEO jacks on the TV set using the RCA cable. Match the jack colors: Video is yellow, Audio left is white, and Audio right is red. Select the AV input source via the SOURCE button on the remote control.
YPbPr Connection
Connect the YPbPr output of the DVD or VCR to the YPbPr input on the TV set. Connect the Audio output of the DVD or VCR to the Audio input jacks on the TV set using the RCA cable.Match the jacks colors : Y is green, Pb is blue,Pr is red, Audio left is white and Audio right is red. Select Component input source via the SOURCE button on the remote control.
HDMI1 VGA AUDIO Y Pb Pr
COMPONENT INPC IN
RF INUSBDC IN COAX HDMI2VIDEO L R
AV IN
9
Connect the VIDEO and AUDIO output jack of the DVD or VCR to the VIDEO jacks on the TV set
using the RCA cable. Match the jack colors: Video is yellow, Audio left is white, and Audio right is red.
Select the AV input source via the SOURCE button on the remote control.
TV Back
Video cable
DVD or VCR back
DVD or VCR
PrPbY L R
DVD or VCR
DVD or VCR Back
YPbPr Cable
Connect the YPbPr output of the DVD or VCR to the YPbPr input on the TV set. Connect the Audiooutput of the DVD or VCR to the Audio input jacks on the TV set using the RCA cable.
Match the jacks colors : Y is green, Pb is blue, Pr is red, Audio left is white and Audio right is red. Select Component input source via the SOURCE button on the remote control.
Audio Cable
AV Connection
YPbPr Connection
TV BackTV Back
COAX HDMI2VIDEO L R
AV IN
TV Installation Drawings
11
Remote Control7. REMOTE CONTROL
Remote Control Instructions in TV/Media mode
10
STANDBY
Turn the LED TV ON or OFF.
SOURCE
,
Press ▲▼ to select an input source, and then press
OK to confirm.
P MODE
Press to select the picture modes
S.MODE
Press this button to change the audio mode.
SLEEP
Lets you select amount of time before your TV turn
itself off automatically.
MUTE
Press to mute the sound. Press again or press VOL+ to
un-mute the TV.
NUMBER BUTTONS
Press 0-9 to select a TV channel directly when you are
watching TV. The channel change after 2 seconds.
-/--
Press this button to enter Channel List.
Return to the previous channel viewed.
MENU
Brings up the main TV menu to the screen.
EXIT
Exit the main TV menu to the screen.
DISPLAY
Press to display the source and channel's information.
THUMBSTICK( ▲/ ▼/◄ / ►/ ENTER)
Allows you to navigate the on-screen menus and adjust
the system settings to your preference.
VOL+/VOL-
Press to increase / decrease the sound level.
CH+/CH-
Press to scan through channels.
TV/RADIO
Select the TV/RADIO mode.
Press SOURCE to display the OSD input source
.
.
Remote Control Instruction in TV/Media mode
STANDBY: Turn the LED TV ON or OFF.
TV/RADIO: Select the TV/RADIO mode.
SOURCE: Press SOURCE to display the OSD input source.
Press / to select an input source, and then
press OK to confirm.
P MODE: Press to select the picture modes.
S.MODE: Press this button to change the audio mode.
SLEEP: Lets you select amount of time before your TV turn
itself off automatically.
MUTE: Press to mute the sound. Press again or press VOL+ to
un-mute the TV.
NUMBER BUTTONS: Press 0-9 to select a TV channel directly
when you are watching TV. The
channel change after 2 seconds.
-/--: Press this button to enter Channel List.
: Return to the previous channel viewed.
MENU: Brings up the main TV menu to the screen.
EXIT: Exit the main TV menu to the screen.
DISPLAY: Press to display the source and channel’s
information.
THUMBSTICK( / / / ENTER):
Allows you to navigate the on-screen menus and adjust the
system settings to your preference.
VOL+/VOL: Press to increase / decrease the sound level.
CH+/CH: Press to scan through channels.
7. REMOTE CONTROL
Remote Control Instructions in TV/Media mode
10
STANDBY
Turn the LED TV ON or OFF.
SOURCE
,
Press ▲▼ to select an input source, and then press
OK to confirm.
P MODE
Press to select the picture modes
S.MODE
Press this button to change the audio mode.
SLEEP
Lets you select amount of time before your TV turn
itself off automatically.
MUTE
Press to mute the sound. Press again or press VOL+ to
un-mute the TV.
NUMBER BUTTONS
Press 0-9 to select a TV channel directly when you are
watching TV. The channel change after 2 seconds.
-/--
Press this button to enter Channel List.
Return to the previous channel viewed.
MENU
Brings up the main TV menu to the screen.
EXIT
Exit the main TV menu to the screen.
DISPLAY
Press to display the source and channel's information.
THUMBSTICK( ▲/ ▼/◄ / ►/ ENTER)
Allows you to navigate the on-screen menus and adjust
the system settings to your preference.
VOL+/VOL-
Press to increase / decrease the sound level.
CH+/CH-
Press to scan through channels.
TV/RADIO
Select the TV/RADIO mode.
Press SOURCE to display the OSD input source
.
.
127. REMOTE CONTROL
Remote Control Instructions in TV/Media mode
10
STANDBY
Turn the LED TV ON or OFF.
SOURCE
,
Press ▲▼ to select an input source, and then press
OK to confirm.
P MODE
Press to select the picture modes
S.MODE
Press this button to change the audio mode.
SLEEP
Lets you select amount of time before your TV turn
itself off automatically.
MUTE
Press to mute the sound. Press again or press VOL+ to
un-mute the TV.
NUMBER BUTTONS
Press 0-9 to select a TV channel directly when you are
watching TV. The channel change after 2 seconds.
-/--
Press this button to enter Channel List.
Return to the previous channel viewed.
MENU
Brings up the main TV menu to the screen.
EXIT
Exit the main TV menu to the screen.
DISPLAY
Press to display the source and channel's information.
THUMBSTICK( ▲/ ▼/◄ / ►/ ENTER)
Allows you to navigate the on-screen menus and adjust
the system settings to your preference.
VOL+/VOL-
Press to increase / decrease the sound level.
CH+/CH-
Press to scan through channels.
TV/RADIO
Select the TV/RADIO mode.
Press SOURCE to display the OSD input source
.
.
Remote Control Instruction in TV/Media mode
HOLD: Hold on or off for current page display.
INDEX: Request the index page(In Teletext mode).
Enter to the recorded list(In DTV mode).
SIZE: Change display size i teletext mode.
AUDIO: Audio select button.
ZOOM: Press while playing and the picture will zoom in once.
SUBTITLE : In DTV mode, press to select alternate subtitle
languages during view/playback of a DTV program.
In teletext mode, press to display P.100.
AUDIO: Audio select button.
Record button:
MEDIA: Press to display the Media menu.
FAV: Press to display the FAV list.
/ : Previous/next chapter in Media mode.
: Stop playing(In Media mode).
: Play or pause(In Media mode).
EPG: Press to enter the EPG menu.
Remote Control
13
Remote Control Setup
1. Open the cover.2. Uses three A size batteries. When inserting the batteries, make sure correct polarities “+”
and “-” marks on the batteries line up correctly with compartment markings .3. Replace the battery cover.
Place the remote control on a even surface and insert the supplied batteries into the remote control as follows.
1. Softly push the back cover to open the battery compartment.
Remote Control Setup
12
1. Open the cover.2. Uses three A size batteries.When inserting the batteries, make sure correct polarities + and - marks
“ ” “ ” on the batteries line up correctly with compartment markings .
3. Replace the battery cover ..
Place the remote control on a even surface and
insert the supplied batteries into the remote control as follows.
1. Softly push the back cover to open the battery compartment.
2. Insert two batteries(1.5V size AAA ),please make sure the polarity matches the marks inside the
compartment.
3. Softly press the back cover to close it.
2. Insert two batteries(1.5V size AAA ),please make sure the polarity matches the marks inside the compartment.
Remote Control Setup
12
1. Open the cover.2. Uses three A size batteries.When inserting the batteries, make sure correct polarities + and - marks
“ ” “ ” on the batteries line up correctly with compartment markings .
3. Replace the battery cover ..
Place the remote control on a even surface and
insert the supplied batteries into the remote control as follows.
1. Softly push the back cover to open the battery compartment.
2. Insert two batteries(1.5V size AAA ),please make sure the polarity matches the marks inside the
compartment.
3. Softly press the back cover to close it.3. Softly press the back cover to close it.
Remote Control Setup
12
1. Open the cover.2. Uses three A size batteries.When inserting the batteries, make sure correct polarities + and - marks
“ ” “ ” on the batteries line up correctly with compartment markings .
3. Replace the battery cover ..
Place the remote control on a even surface and
insert the supplied batteries into the remote control as follows.
1. Softly push the back cover to open the battery compartment.
2. Insert two batteries(1.5V size AAA ),please make sure the polarity matches the marks inside the
compartment.
3. Softly press the back cover to close it.
Remote Control
14
Menu OperationIn ATV/DTV mode press the MENU button to enter the main menu. A window will appear, use
/ to scroll through the following menu headings: CHANNEL, PICTURE, SOUND, TIME, OPTION and LOCK. Press or OK to enter the sub menus under the headings listed above.While in MENU mode, press the MENU button to return to the previous menu window, or press EXIT to exit menu mode completely.
Installation Guide
Press / / / to set the TV backlight mode and press OK to begin auto tuning.
Press / / / to set the OSD language/Country/Tune Type and press OK to begin auto tuning.
CHANNEL Menu
13
Move BackMENU OK Select QuitEXIT
Auto Scan
Move OK OK ExitEXIT
Country
Tune Type
Australia
ATV+DTV
7 . MENU OPERATION
CHANNEL Menu
Note
all other input modes.
CHANNEL can be only selected under ATV/DTV mode. The CHANNEL menu is disabled while in
CHANNEL
Auto Scan
DTV Manual Tuning
ATV Manual Tuning
Program Edit
Signal information
Record Start
Move BackMENU OK Select QuitEXIT
CHANNEL
ATV Manual Tuning
Program Edit
Signal information
Record Start
Recorded List
Recorded Mode
Schedule List
PVR File System
Press to set the OSD language/Country/Tune Type and press OK to begin auto tuning.▲▼◄►
Press MENU button display the main menu, use CHANNEL ,
, .
to ◄► to select menu press OK or
to enter and press menu to return to the main menu
▼
Installation Guide
Move SelectOK QuitEXIT
Please set the following options, then
Press OK button to begin auto tuning.
OSD Lauguage
Country
Tune Type
English
Australia
ATV+DTV
In ATV/DTV mode press the MENU button to enter the main menu. A window will appear, use ◄►to scroll through the following menu headings: CHANNEL, PICTURE, SOUND, TIME, OPTION
and LOCK. Press ▼ or OK to enter the sub menus under the headings listed above.
While in MENU mode, press the MENU button to return to the previous menu window, or press
EXIT to exit menu mode completely.
Auto Scan
INSTALLATION GUIDE
Backlight Mode
Move SelectOK QuitEXIT
Default
Dynamic
Mild
Standard
Press to set the TV backlight mode and press OK to begin auto tuning.▲▼◄►
13
Move BackMENU OK Select QuitEXIT
Auto Scan
Move OK OK ExitEXIT
Country
Tune Type
Australia
ATV+DTV
7 . MENU OPERATION
CHANNEL Menu
Note
all other input modes.
CHANNEL can be only selected under ATV/DTV mode. The CHANNEL menu is disabled while in
CHANNEL
Auto Scan
DTV Manual Tuning
ATV Manual Tuning
Program Edit
Signal information
Record Start
Move BackMENU OK Select QuitEXIT
CHANNEL
ATV Manual Tuning
Program Edit
Signal information
Record Start
Recorded List
Recorded Mode
Schedule List
PVR File System
Press to set the OSD language/Country/Tune Type and press OK to begin auto tuning.▲▼◄►
Press MENU button display the main menu, use CHANNEL ,
, .
to ◄► to select menu press OK or
to enter and press menu to return to the main menu
▼
Installation Guide
Move SelectOK QuitEXIT
Please set the following options, then
Press OK button to begin auto tuning.
OSD Lauguage
Country
Tune Type
English
Australia
ATV+DTV
In ATV/DTV mode press the MENU button to enter the main menu. A window will appear, use ◄►to scroll through the following menu headings: CHANNEL, PICTURE, SOUND, TIME, OPTION
and LOCK. Press ▼ or OK to enter the sub menus under the headings listed above.
While in MENU mode, press the MENU button to return to the previous menu window, or press
EXIT to exit menu mode completely.
Auto Scan
INSTALLATION GUIDE
Backlight Mode
Move SelectOK QuitEXIT
Default
Dynamic
Mild
Standard
Press to set the TV backlight mode and press OK to begin auto tuning.▲▼◄►
Press MENU button to display the main menu, use / to select CHANNEL menu, press OK or to enter, and press menu to return to the main menu.
NOTE: CHANNEL can be only selected under ATV/DTV mode. The CHANNEL menu is disabled while in all other input modes.
Auto Scan
13
Move BackMENU OK Select QuitEXIT
Auto Scan
Move OK OK ExitEXIT
Country
Tune Type
Australia
ATV+DTV
7 . MENU OPERATION
CHANNEL Menu
Note
all other input modes.
CHANNEL can be only selected under ATV/DTV mode. The CHANNEL menu is disabled while in
CHANNEL
Auto Scan
DTV Manual Tuning
ATV Manual Tuning
Program Edit
Signal information
Record Start
Move BackMENU OK Select QuitEXIT
CHANNEL
ATV Manual Tuning
Program Edit
Signal information
Record Start
Recorded List
Recorded Mode
Schedule List
PVR File System
Press to set the OSD language/Country/Tune Type and press OK to begin auto tuning.▲▼◄►
Press MENU button display the main menu, use CHANNEL ,
, .
to ◄► to select menu press OK or
to enter and press menu to return to the main menu
▼
Installation Guide
Move SelectOK QuitEXIT
Please set the following options, then
Press OK button to begin auto tuning.
OSD Lauguage
Country
Tune Type
English
Australia
ATV+DTV
In ATV/DTV mode press the MENU button to enter the main menu. A window will appear, use ◄►to scroll through the following menu headings: CHANNEL, PICTURE, SOUND, TIME, OPTION
and LOCK. Press ▼ or OK to enter the sub menus under the headings listed above.
While in MENU mode, press the MENU button to return to the previous menu window, or press
EXIT to exit menu mode completely.
Auto Scan
INSTALLATION GUIDE
Backlight Mode
Move SelectOK QuitEXIT
Default
Dynamic
Mild
Standard
Press to set the TV backlight mode and press OK to begin auto tuning.▲▼◄►
15
Auto Scan
In the Auto Scan menu there are 2 options for you select from, Country and Tune Type.Press / to select Country and Tune Type, press OK to start scanning. If you select ATV+DTV, the first 50% of the processing is for ATV tuning, while the second 50% represents DTV tuning. When ATV tuning, you can press MENU to skip ATV tuning and start DTV tuning, or press EXIT to exit tuning.
Press / / / to set the TV backlight mode and press OK to begin auto tuning.
Press / / / to set the OSD language/Country/Tune Type and press OK to begin auto tuning.
CHANNEL Menu
14
DTV Manual Tuning
In the Auto Scan menu there are 2 options for you select from, Country and Tune Type.
Press / to select Country and Tune Type, press OK to start scanning. If you select ATV+DTV,
the first 50% of the processing is for ATV tuning, while the second 50% represents DTV tuning.
When ATV tuning, you can press MENU to skip ATV tuning and start DTV tuning, or press EXIT to
exit tuning.
◄ ►
Channel Tuning
QuitEXITMENU
9% 474.00 MHz (TV)
TV
DTV
Radio
:
:
:
0
0
0
Programme(s)
Programme(s)
Programme(s)
DTV Manual Tuning
UHF CH 27
Press OK to search
QuitEXITBackMENU
Bad Normal Good
Auto Scan
You can manually tune DTV channels in the CHANNEL menu.
Press the ◄► buttons to select the channel you wish to tune, then press ENTER button to scan for
the channel.
ATV Manual Tuning
You can manually tune ATV channels in the CHANNEL menu.
ATV Manual Tuning
Storage To 1 ►◄
System DK ►◄
►◄
►◄
►◄
Current CH 1
Search
Fine-Tune
Frequency 511.31 Mhz
QuitEXITMove Save
Back
DTV Manual TuningYou can manually tune DTV channels in the CHANNEL menu.Press / the buttons to select the channel you wish to tune, then press ENTER button to scan for the channel.
14
DTV Manual Tuning
In the Auto Scan menu there are 2 options for you select from, Country and Tune Type.
Press / to select Country and Tune Type, press OK to start scanning. If you select ATV+DTV,
the first 50% of the processing is for ATV tuning, while the second 50% represents DTV tuning.
When ATV tuning, you can press MENU to skip ATV tuning and start DTV tuning, or press EXIT to
exit tuning.
◄ ►
Channel Tuning
QuitEXITMENU
9% 474.00 MHz (TV)
TV
DTV
Radio
:
:
:
0
0
0
Programme(s)
Programme(s)
Programme(s)
DTV Manual Tuning
UHF CH 27
Press OK to search
QuitEXITBackMENU
Bad Normal Good
Auto Scan
You can manually tune DTV channels in the CHANNEL menu.
Press the ◄► buttons to select the channel you wish to tune, then press ENTER button to scan for
the channel.
ATV Manual Tuning
You can manually tune ATV channels in the CHANNEL menu.
ATV Manual Tuning
Storage To 1 ►◄
System DK ►◄
►◄
►◄
►◄
Current CH 1
Search
Fine-Tune
Frequency 511.31 Mhz
QuitEXITMove Save
Back
ATV Manual TuningYou can manually tune ATV channels in the CHANNEL menu.
14
DTV Manual Tuning
In the Auto Scan menu there are 2 options for you select from, Country and Tune Type.
Press / to select Country and Tune Type, press OK to start scanning. If you select ATV+DTV,
the first 50% of the processing is for ATV tuning, while the second 50% represents DTV tuning.
When ATV tuning, you can press MENU to skip ATV tuning and start DTV tuning, or press EXIT to
exit tuning.
◄ ►
Channel Tuning
QuitEXITMENU
9% 474.00 MHz (TV)
TV
DTV
Radio
:
:
:
0
0
0
Programme(s)
Programme(s)
Programme(s)
DTV Manual Tuning
UHF CH 27
Press OK to search
QuitEXITBackMENU
Bad Normal Good
Auto Scan
You can manually tune DTV channels in the CHANNEL menu.
Press the ◄► buttons to select the channel you wish to tune, then press ENTER button to scan for
the channel.
ATV Manual Tuning
You can manually tune ATV channels in the CHANNEL menu.
ATV Manual Tuning
Storage To 1 ►◄
System DK ►◄
►◄
►◄
►◄
Current CH 1
Search
Fine-Tune
Frequency 511.31 Mhz
QuitEXITMove Save
Back
Menu Operation
16
Storage to: Press / the buttons to change the numbered location of the found channel.System: Select the system using the / buttons.Current CH: Displays the current channel number, press the / buttons to choose the channel you wish to modify.Search: Press the / buttons to scan through the frequencies to find new channels.Fine tune: In case of bad reception, you can press the / buttons to make fine adjustments to the tuning. After manual tuning is complete, please press the RED key to save any found channels.
Program Edit
15
Storage to
SystemSelect the system using the ◄► buttons.
Current CHDisplays the current channel number, press the ◄► buttons to choose the channel you wish to modify.
SearchPress the ◄► buttons to scan through the frequencies to find new channels.
Fine tuneIn case of bad reception, you can press the ◄► buttons to make fine adjustments to the tuning.
After manual tuning is complete, please press the RED key to save any found channels.
press the ◄► buttons to change the numbered location of the found channel.
Use to navigate through the Program Edit window.▲▼
DELETEPress the RED button to delete the highlighted channel, a red circle will appear next to the channel
name.
Press the RED key again to confirm delete.
Press MENU to return to the main menu.
Program Edit
CH.NAME SKIP LOCK FAV Type
Program Edit
Radio
ATV
ATV
ATV
702 BBC Radio 2
703 BBC Radio 3
704 BBC Radio 4
714 heat
1 C-26
2 C-44
3 C-56
Radio
Radio
Radio
2 ABC TV Meihour
20 ABC HDTV DTV
DTV
Move BackMENUOK Select Delete Move Skip Rename FAVFAV
MOVEPress ▲▼ to select the channel , press yellow button to enter the move mode, then press ▲/▼
to move the channel location, press yellow button again or press OK to confirm.
Press MENU to return to the main menu.
SKIPPress ▲ ▼ to select the channel you wish to skip.
Press the BLUE button, a logo will appear next to the channel name and the channel will be skipped
when you scroll through the channels.
Press the BLUE button again on the highlighted channel to disable the skip function.
Press MENU to return to the main menu.
Use / to navigate through the Program Edit window.
DELETE: Press the RED button to delete the highlighted channel, a red circle will appear next to the channel name. Press the RED key again to confirm delete. Press MENU to return to the main menu.
MOVE: Press / to select the channel , press yellow button to enter the move mode, then, press / to move the channel location, press yellow button again or press OK to confirm.Press MENU to return to the main menu.
SKIP: Press / to select the channel you wish to skip. Press the BLUE button, a logo will appear next to the channel name and the channel will be skipped when you scroll through the channels. Press the BLUE button again on the highlighted channel to disable the skip function. Press MENU to return to the main menu.
Menu Operation
17
Rename (Only available in ATV):Modify current channel name, only used in ATV mode.Press green button to enter RENAME mode, then use the / / / change name.Press green button again or press menu button to confirm.FAV: Set your favorite channel by pressing the / buttons to highlight the channel, then press the FAV button. A logo will appear next to the channel name. When you are viewing you can press the FAV button to see a list of your favorite channels.Signal Information: Only available in DTV mode, Signal Information includes: channel / network /modulation/quality/strength.PVR MENU: Enter PVR menu. (See page 32 for more details)
PICTURE Menu
Press MENU button display the main menu, use / to select PICTURE , press OK or to enter, and press menu to return to the main menu.
Picture Mode
16
Rename(Only available in ATV)Modify current channel name, only used in ATV mode.
Press green button to enter RENAME mode, then use the ◄►▲▼ change name.
Press green button again or press menu button to confirm.
FAVSet your favoriteFAV button.A logo will appear next to the channel name. When you are viewing you can press the FAV buttonto see a list of your favorite channels.
channel by pressing the ▲ ▼ buttons to highlight the channel, then press the
Signal InformationOnly available in DTV mode, Signal Information includes:channel /network /modulation/quality
/strength.
Enter PVR menu.
PVR MENU(See page 32 for more details)
Move BackMENU OK Select QuitEXITMove BackMENU OK Select QuitEXIT
PICTURE Menu
Picture Mode
Picture Mode Standard
Adjust QuitEXITBackMENU
PICTURE
Picture Mode
Contrast
Brightness
Color
Sharpness
Tint
Color Temperature
Red
Standard
50
50
50
50
50
Red
Green
Blue
Aspect Ratio
Noise Reduction
Screen
50
50
50
16:9
Middle
Press to select the picture mode,press MENU to return to the main menu.
You can select from the following preset modes - Dynamic, Standard, Mild or User.
Only User mode allows the adjustment of Contrast, Brightness, Colour and Sharpness, Tint is only
available to adjust for NTSC.
◄►
Press MENU button display the main menu, use PICTURE ,
, .
to ◄► to select menu press OK or
to enter and press menu to return to the main menu
▼
PICTURE
Contrast
Contrast / Brightness / Color / Sharpness/Tint
Adjust QuitEXITBackMENU
50
In User mode, select from Contrast/Brightness/Color/Sharpness using ▲▼ and press ◄► to
make adjustments.
16
Rename(Only available in ATV)Modify current channel name, only used in ATV mode.
Press green button to enter RENAME mode, then use the ◄►▲▼ change name.
Press green button again or press menu button to confirm.
FAVSet your favoriteFAV button.A logo will appear next to the channel name. When you are viewing you can press the FAV buttonto see a list of your favorite channels.
channel by pressing the ▲ ▼ buttons to highlight the channel, then press the
Signal InformationOnly available in DTV mode, Signal Information includes:channel /network /modulation/quality
/strength.
Enter PVR menu.
PVR MENU(See page 32 for more details)
Move BackMENU OK Select QuitEXITMove BackMENU OK Select QuitEXIT
PICTURE Menu
Picture Mode
Picture Mode Standard
Adjust QuitEXITBackMENU
PICTURE
Picture Mode
Contrast
Brightness
Color
Sharpness
Tint
Color Temperature
Red
Standard
50
50
50
50
50
Red
Green
Blue
Aspect Ratio
Noise Reduction
Screen
50
50
50
16:9
Middle
Press to select the picture mode,press MENU to return to the main menu.
You can select from the following preset modes - Dynamic, Standard, Mild or User.
Only User mode allows the adjustment of Contrast, Brightness, Colour and Sharpness, Tint is only
available to adjust for NTSC.
◄►
Press MENU button display the main menu, use PICTURE ,
, .
to ◄► to select menu press OK or
to enter and press menu to return to the main menu
▼
PICTURE
Contrast
Contrast / Brightness / Color / Sharpness/Tint
Adjust QuitEXITBackMENU
50
In User mode, select from Contrast/Brightness/Color/Sharpness using ▲▼ and press ◄► to
make adjustments.
Press / to select the picture mode,press MENU to return to the main menu.You can select from the following preset modes - Dynamic, Standard, Mild or User.Only User mode allows the adjustment of Contrast, Brightness, Colour and Sharpness, Tint is only available to adjust for NTSC.
Contrast / Brightness / Color / Sharpness / Tint
16
Rename(Only available in ATV)Modify current channel name, only used in ATV mode.
Press green button to enter RENAME mode, then use the ◄►▲▼ change name.
Press green button again or press menu button to confirm.
FAVSet your favoriteFAV button.A logo will appear next to the channel name. When you are viewing you can press the FAV buttonto see a list of your favorite channels.
channel by pressing the ▲ ▼ buttons to highlight the channel, then press the
Signal InformationOnly available in DTV mode, Signal Information includes:channel /network /modulation/quality
/strength.
Enter PVR menu.
PVR MENU(See page 32 for more details)
Move BackMENU OK Select QuitEXITMove BackMENU OK Select QuitEXIT
PICTURE Menu
Picture Mode
Picture Mode Standard
Adjust QuitEXITBackMENU
PICTURE
Picture Mode
Contrast
Brightness
Color
Sharpness
Tint
Color Temperature
Red
Standard
50
50
50
50
50
Red
Green
Blue
Aspect Ratio
Noise Reduction
Screen
50
50
50
16:9
Middle
Press to select the picture mode,press MENU to return to the main menu.
You can select from the following preset modes - Dynamic, Standard, Mild or User.
Only User mode allows the adjustment of Contrast, Brightness, Colour and Sharpness, Tint is only
available to adjust for NTSC.
◄►
Press MENU button display the main menu, use PICTURE ,
, .
to ◄► to select menu press OK or
to enter and press menu to return to the main menu
▼
PICTURE
Contrast
Contrast / Brightness / Color / Sharpness/Tint
Adjust QuitEXITBackMENU
50
In User mode, select from Contrast/Brightness/Color/Sharpness using ▲▼ and press ◄► to
make adjustments.In User mode, select from Contrast/Brightness/Color/Sharpness using / and press / to make adjustments.
Menu Operation
18
Color Temperature
17
Color Temperature Medium
Color Temperature
Red/Green/Blue
In User mode press to select Red/Green or Blue, .
Press MENU to return main menu.
▲▼ then press ◄► to adjust
to the
You can select from the following preset modes Cool, Medium or Warm. Only User mode allows
adjustment of Red, Green and Blue values.
Adjust QuitEXITBackMENU
Aspect Ratio
◄►
Press to highlight Aspect Ratio and OK to enter. A window will appear at the bottom of the screen,
press to scroll through the following options to get the best fit picture on your screen - 16:9,
ZOOM 1, ZOOM 2, Auto,4:3.
▲▼
Noise Reduction
Press to highlight Aspect Ratio and OK to enter.
Use ◄►to select from noise reduction modes as follows: Off, Low, Middle, High.
Note
Noise Reduction is not available in PC mode.
▲▼
Auto AdjustSelect “Auto Adjust”and press , the unit will automatically adjust all items.
Horizontal Pos.Allows you to use buttons to adjust the Horizontal Position.
Vertical Pos.Allows you to use buttons to adjust the Vertical Position.
SizeAllows you to adjust the width of image.
PhaseAllows you to adjust the definition.
►
◄►
◄►
Screen
Auto Adjust
Horizontal Pos.
Vertical Pos.
Size
Phase
50
50
50
30
QuitEXITBackMENUMove
Screen( Only available in PC mode).
You can select from the following preset modes Cool, Medium or Warm. Only User mode allows adjustment of Red, Green and Blue values.Red / Green / Blue:In user mode, press / to select Red/Green/ Blue, then press / to adjust.Press MENU to return to the main menu.Aspect Ratio:Press / to highlight Aspect Ratio and OK to enter. A window will appear at the bottom of the screen, press / to scroll through the following options to get the best fit picture on your screen - 16:9, ZOOM 1, ZOOM 2, Auto,4:3.Noise Reduction:Press / to highlight Aspect Ratio and OK to enter.Use / to select from noise reduction modes as follows: Off, Low, Middle, High.NOTE: Noise Reduction is not available in PC mode.
Screen( Only available in PC mode)
17
Color Temperature Medium
Color Temperature
Red/Green/Blue
In User mode press to select Red/Green or Blue, .
Press MENU to return main menu.
▲▼ then press ◄► to adjust
to the
You can select from the following preset modes Cool, Medium or Warm. Only User mode allows
adjustment of Red, Green and Blue values.
Adjust QuitEXITBackMENU
Aspect Ratio
◄►
Press to highlight Aspect Ratio and OK to enter. A window will appear at the bottom of the screen,
press to scroll through the following options to get the best fit picture on your screen - 16:9,
ZOOM 1, ZOOM 2, Auto,4:3.
▲▼
Noise Reduction
Press to highlight Aspect Ratio and OK to enter.
Use ◄►to select from noise reduction modes as follows: Off, Low, Middle, High.
Note
Noise Reduction is not available in PC mode.
▲▼
Auto AdjustSelect “Auto Adjust”and press , the unit will automatically adjust all items.
Horizontal Pos.Allows you to use buttons to adjust the Horizontal Position.
Vertical Pos.Allows you to use buttons to adjust the Vertical Position.
SizeAllows you to adjust the width of image.
PhaseAllows you to adjust the definition.
►
◄►
◄►
Screen
Auto Adjust
Horizontal Pos.
Vertical Pos.
Size
Phase
50
50
50
30
QuitEXITBackMENUMove
Screen( Only available in PC mode).
Auto Adjust: Select “Auto Adjust”and press , the unit will automatically adjust all items.Horizontal Pos: Allows you to use / buttons to adjust the Horizontal Position.Vertical Pos: Allows you to use / buttons to adjust the Vertical Position.Size: Allows you to adjust the width of image.Phase: Allows you to adjust the definition.
Menu Operation
19
SOUND Menu
Press MENU button display the main menu, use / to select SOUND menu press OK or to enter and press menu to return to the main menu.
Sound Mode
18
Move BackMENU OK Select QuitEXIT
SOUND Menu
Press MENU button display the main menu, use ,
, .
to ◄► to select SOUND menu press OK or
to enter and press menu to return to the main menu
▼
Sound Mode
Press ◄► to select from the following sound modes: User, Standard, Music, Movie and Sports.
Press MENU or OK to confirm.
Treble
Bass
Balance
Auto Volume
Surround Sound
SPDIF MODE
Sound Mode Standard
50
50
0
Off
Off
Auto
SOUND
Sound Mode Music
Adjust QuitEXITBackMENU
Treble/ Bass /Balance
Auto sound adjust, press / .
Auto Volume◄► to set ON OFF
Use to select the Treble /Bass /Balance, and press to adjust.
Treble and Bass are only adjustable in User mode.
▲/▼ ◄►
Surround Soundurround settings, / .S sound press ◄► to set ON OFF
SPDIF MODEPress OK to enter the sub menu use ▲▼ to select Off/PCM/Auto, press MENU or OK to confirm. ,
Press / to select from the following sound modes: User, Standard, Music, Movie and Sports. Press MENU or OK to confirm.
Treble/ Bass /Balance: Use / to select the Treble /Bass /Balance, and press / to adjust. Treble and Bass are only adjustable in User mode.
Auto Volume: Auto sound adjust, press / to set ON OFF
Surround Sound: Surround sound settings, press / to set ON/OFF.
SPDIF MODEPress OK to enter the sub menu, use / to select Off/PCM/Auto, press MENU or OK to confirm.
18
Move BackMENU OK Select QuitEXIT
SOUND Menu
Press MENU button display the main menu, use ,
, .
to ◄► to select SOUND menu press OK or
to enter and press menu to return to the main menu
▼
Sound Mode
Press ◄► to select from the following sound modes: User, Standard, Music, Movie and Sports.
Press MENU or OK to confirm.
Treble
Bass
Balance
Auto Volume
Surround Sound
SPDIF MODE
Sound Mode Standard
50
50
0
Off
Off
Auto
SOUND
Sound Mode Music
Adjust QuitEXITBackMENU
Treble/ Bass /Balance
Auto sound adjust, press / .
Auto Volume◄► to set ON OFF
Use to select the Treble /Bass /Balance, and press to adjust.
Treble and Bass are only adjustable in User mode.
▲/▼ ◄►
Surround Soundurround settings, / .S sound press ◄► to set ON OFF
SPDIF MODEPress OK to enter the sub menu use ▲▼ to select Off/PCM/Auto, press MENU or OK to confirm. ,
Menu Operation
20
TIME Menu
19
Move BackMENU OK Select QuitEXIT
31/May 14:25
Off
Off
Off
On
Western Australia..
TIME
I
I
II
I
III
Clock
Off Time
On Time
Sleep Timer
Auto Sleep
Time Zone
TIME Menu
Press MENU button display the main menu, use ,
, .
to ◄► to select TIME menu press OK or
to enter and press menu to return to the main menu
▼
Clock
Date Month
Year
Hour
Minute
Move BackMENU QuitEXIT
Clock
◄ ►20
◄ ►May
◄ ►2010
◄ ►13
◄ ►25
Press to set the Date/Month/Year/Hour/Minute, press MENU to confirm and return to
Time menu.
◄►▲▼
Off Time
Off Time
Repeat
Hour
Minute
Once
13
28
Move BackMENU QuitEXIT
Press .MENU to confirm and return to TIME menu
You can set a time for the TV to turn off automatically. The Repeat mode allows the unit to be set to
turned off Once, Every day, Mon-Fri, Mon-Sat, Sat-Sun or only Sun, use ◄► to select your preference.
Once the Repeat setting has been made, press ▲▼ to select Hour and Minute settings, use ◄►
to adjust.
Auto clock update: please select DTV to obtains the time.
II
I
I
Auto clock update: please select DTV to obtains the time.Press MENU button to display the main menu, use / to select TIME menu, press OK or to enter, and press menu to return to the main menu.
Clock
Press / / / to set the Date/Month/Year/Hour/Minute, press MENU to confirm and return toTime menu.
Off TimeYou can set a time for the TV to turn off automatically. The Repeat mode allows the unit to be set to turned off Once, Every day, Mon-Fri, Mon-Sat, Sat-Sun or only Sun, use / to select your preference. Once the Repeat setting has been made, press / to select Hour and Minute settings, use / to adjust.
19
Move BackMENU OK Select QuitEXIT
31/May 14:25
Off
Off
Off
On
Western Australia..
TIME
I
I
II
I
III
Clock
Off Time
On Time
Sleep Timer
Auto Sleep
Time Zone
TIME Menu
Press MENU button display the main menu, use ,
, .
to ◄► to select TIME menu press OK or
to enter and press menu to return to the main menu
▼
Clock
Date Month
Year
Hour
Minute
Move BackMENU QuitEXIT
Clock
◄ ►20
◄ ►May
◄ ►2010
◄ ►13
◄ ►25
Press to set the Date/Month/Year/Hour/Minute, press MENU to confirm and return to
Time menu.
◄►▲▼
Off Time
Off Time
Repeat
Hour
Minute
Once
13
28
Move BackMENU QuitEXIT
Press .MENU to confirm and return to TIME menu
You can set a time for the TV to turn off automatically. The Repeat mode allows the unit to be set to
turned off Once, Every day, Mon-Fri, Mon-Sat, Sat-Sun or only Sun, use ◄► to select your preference.
Once the Repeat setting has been made, press ▲▼ to select Hour and Minute settings, use ◄►
to adjust.
Auto clock update: please select DTV to obtains the time.
I
II
I
19
Move BackMENU OK Select QuitEXIT
31/May 14:25
Off
Off
Off
On
Western Australia..
TIME
I
I
II
I
III
Clock
Off Time
On Time
Sleep Timer
Auto Sleep
Time Zone
TIME Menu
Press MENU button display the main menu, use ,
, .
to ◄► to select TIME menu press OK or
to enter and press menu to return to the main menu
▼
Clock
Date Month
Year
Hour
Minute
Move BackMENU QuitEXIT
Clock
◄ ►20
◄ ►May
◄ ►2010
◄ ►13
◄ ►25
Press to set the Date/Month/Year/Hour/Minute, press MENU to confirm and return to
Time menu.
◄►▲▼
Off Time
Off Time
Repeat
Hour
Minute
Once
13
28
Move BackMENU QuitEXIT
Press .MENU to confirm and return to TIME menu
You can set a time for the TV to turn off automatically. The Repeat mode allows the unit to be set to
turned off Once, Every day, Mon-Fri, Mon-Sat, Sat-Sun or only Sun, use ◄► to select your preference.
Once the Repeat setting has been made, press ▲▼ to select Hour and Minute settings, use ◄►
to adjust.
Auto clock update: please select DTV to obtains the time.
I
II
I
Press MENU to confirm and return to TIME menu.
Menu Operation
21
On TimeYou can specify a time, input source, channel and volume for the TV to turn on.Press / to select Repeat mode and use / to select your preference as above.Use / to select the other parameters and / to adjust.
Press MENU to confirm and return to TIME menu.Sleep time: Press OK to enter Sleep Time sub menu, use / to set the sleep time. You can select from the following Sleep times: 10, 20, 30, 60, 90, 120, 180, 240 minutes or Off to disable the Sleep time function. Then press OK or MENU to confirm.Auto Sleep: Press / to select ON/OFF. This function allows you to set your TV to automatically turn off after 10 minutes if the TV detects no signal from the inputs.Time zone: Press OK to enter Time Zone sub menu, use / to set time zone for your local area. Press OK or MENU to confirm.
OPTION Menu
20
On Time
Press .MENU to confirm and return to TIME menu
Sleep time
following Sleep times: 10, 20, 30, 60, 90, 120, 180, 240 minutes or Off to disable the Sleep time
function. Then press OK or MENU to confirm.
Press OK to enter Sleep Time sub menu, use . You can select from the▲▼ to set the sleep time
Time zone
Press OK to enter Time Zone sub menu, use ▲▼ to set time zone for your local area. Press OK or MENU
On Time
Repeat
Hour
Minute
Source
Channel
Volume
◄ ►Once
◄ ►12
◄ ►00
◄ ►DTV
◄ ►1
◄ ►30
Move BackMENU QuitEXIT
You can specify a time, input source, channel and volume for the TV to turn on.
Press to select Repeat mode and use ◄► to select your preference as above.
Use ▲▼ to select the other parameters and ◄► to adjust.
▲▼
Auto Sleep
.
This function allows you to set your TV to automatically turn off after 10 minutes if the TV detects
no signal from the inputs.
Press ◄►to select ON/OFF
Move BackMENU OK Select QuitEXITMove BackMENU OK Select QuitEXIT
English
English
English
English
English
40S
OSD Language
Audio Languages 1st
Audio Languages 2nd
Subtitle Languages 1st
Subtitle Languages 2nd
OSD Duration
OPTION
OPTION Menu
English
English
English
40s
Australia
Audio La guage n s 2nd
S n s 1stubtitle La guage
Subtitle La guage n s 2nd
OSD Duration
Country
Restore Factory Default
Press MENU to display main menu, use ,
enter, press MENU to return to main menu.
◄►to select OPTION menu then press OK or ▼ to
OSD Language
Audio Language 1St/2nd
Press OK to enter OSD Language sub menu, use to set language.▲▼ OSD
Press OK to enter Audio Language sub menu, use to set language.▲▼ Audio
to confirm.
OPTION
Software Update(USB)
OnBlue Screen
Backlight Mode Default
20
On Time
Press .MENU to confirm and return to TIME menu
Sleep time
following Sleep times: 10, 20, 30, 60, 90, 120, 180, 240 minutes or Off to disable the Sleep time
function. Then press OK or MENU to confirm.
Press OK to enter Sleep Time sub menu, use . You can select from the▲▼ to set the sleep time
Time zone
Press OK to enter Time Zone sub menu, use ▲▼ to set time zone for your local area. Press OK or MENU
On Time
Repeat
Hour
Minute
Source
Channel
Volume
◄ ►Once
◄ ►12
◄ ►00
◄ ►DTV
◄ ►1
◄ ►30
Move BackMENU QuitEXIT
You can specify a time, input source, channel and volume for the TV to turn on.
Press to select Repeat mode and use ◄► to select your preference as above.
Use ▲▼ to select the other parameters and ◄► to adjust.
▲▼
Auto Sleep
.
This function allows you to set your TV to automatically turn off after 10 minutes if the TV detects
no signal from the inputs.
Press ◄►to select ON/OFF
Move BackMENU OK Select QuitEXITMove BackMENU OK Select QuitEXIT
English
English
English
English
English
40S
OSD Language
Audio Languages 1st
Audio Languages 2nd
Subtitle Languages 1st
Subtitle Languages 2nd
OSD Duration
OPTION
OPTION Menu
English
English
English
40s
Australia
Audio La guage n s 2nd
S n s 1stubtitle La guage
Subtitle La guage n s 2nd
OSD Duration
Country
Restore Factory Default
Press MENU to display main menu, use ,
enter, press MENU to return to main menu.
◄►to select OPTION menu then press OK or ▼ to
OSD Language
Audio Language 1St/2nd
Press OK to enter OSD Language sub menu, use to set language.▲▼ OSD
Press OK to enter Audio Language sub menu, use to set language.▲▼ Audio
to confirm.
OPTION
Software Update(USB)
OnBlue Screen
Backlight Mode Default
Press MENU to display main menu, use / to select OPTION menu, then press OK or to enter, press MENU to return to main menu.OSD Language: Press OK to enter OSD Language sub menu, use / to set OSD language.Audio Language 1St/2nd: Press OK to enter Audio Language sub menu, use / to set Audio language.
Menu Operation
22
Subtitle Language 1st/2nd: Press OK to enter Subtitle Language sub menu, use / to set subtitle language.OSD Duration: Press OK to enter OSD Duration sub menu, use / to select the amount of time the OSD will remain on screen.Country: Displays your country as set in the Installation Guide, not adjustable.Restore Factory Default: Press OK to enter second menu, use / to select “yes” or “no”, and press OK again to confirm.NOTE: Use Restore Factory Reset function with caution, as it will erase all channels and return your settings to factory default settings.
LOCK Menu
21
Move BackMENU OK Select QuitEXIT
Subtitle Language 1st/2nd
Press OK to enter Subtitle Language sub menu, use to set language.▲▼ Subtitle
Country Displays your country as set in the Installation Guide, not adjustable.
OSD Duration▲▼ to select the
the screen.
Press OK to enter OSD Duration sub menu, use amount of time the OSD will remain on
LOCKNo Block
Lock Channel
Set Password
Block Program
Program Guide
LOCK Menu
Press MENU to display main menu, use LOCK , enter.
A password is required to enter the Lock settings. Enter the default password '0000' to unlock the menu.
Press ◄ to quite password and return to main menu.
Press ► to clear any incorrectly entered numbers. The correct numbers will need to be entered to
enter the LOCK sub menu. The message 'Wrong Password' will be displayed if the numbers are
entered incorrectly.
Press Menu to return to Lock menu.
◄►to select menu then press OK or ▼ to
Off
Restore factory default nter second menu, use to select yes no , .
NoteUse Restore Factory Reset function with caution as it will erase all channels and return
your settings to factory default.
Press OK to e ▲▼ “ ” or “ ” and press OK again to confirm
Please enter password
Cancel Clear
Lock ChannelThis setting enables a password lock for the Program Edit function under the Channel menu.
Press ◄► or OK to turn the lock On or Off.
Hotel Setting
Press MENU to display main menu, use / to select LOCK menu , then press OK or to enter.A password is required to enter the Lock settings. Enter the default password ‘0000’ to unlock the menu.Press to quite password and return to main menu.Press to clear any incorrectly entered numbers. The correct numbers will need to be entered toenter the LOCK sub menu. The message ‘Wrong Password’ will be displayed if the numbers are entered incorrectly.Press Menu to return to Lock menu.
21
Move BackMENU OK Select QuitEXIT
Subtitle Language 1st/2nd
Press OK to enter Subtitle Language sub menu, use to set language.▲▼ Subtitle
Country Displays your country as set in the Installation Guide, not adjustable.
OSD Duration▲▼ to select the
the screen.
Press OK to enter OSD Duration sub menu, use amount of time the OSD will remain on
LOCKNo Block
Lock Channel
Set Password
Block Program
Program Guide
LOCK Menu
Press MENU to display main menu, use LOCK , enter.
A password is required to enter the Lock settings. Enter the default password '0000' to unlock the menu.
Press ◄ to quite password and return to main menu.
Press ► to clear any incorrectly entered numbers. The correct numbers will need to be entered to
enter the LOCK sub menu. The message 'Wrong Password' will be displayed if the numbers are
entered incorrectly.
Press Menu to return to Lock menu.
◄►to select menu then press OK or ▼ to
Off
Restore factory default nter second menu, use to select yes no , .
NoteUse Restore Factory Reset function with caution as it will erase all channels and return
your settings to factory default.
Press OK to e ▲▼ “ ” or “ ” and press OK again to confirm
Please enter password
Cancel Clear
Lock ChannelThis setting enables a password lock for the Program Edit function under the Channel menu.
Press ◄► or OK to turn the lock On or Off.
Hotel Setting
Lock ChannelThis setting enables a password lock for the Program Edit function under the Channel menu.Press / or OK to turn the lock On or Off.
Menu Operation
23
Set Password
Press OK to enter sub menu.Using the numeric keys enter the old password followed by your new password.Enter the new password again to confirm.
Block ProgramUse / to select the channel, and press Green button to lock/unlock the channel.If the channel is locked you will be prompted to enter a password before you can access the channel.
Hotel Setting
22
Set Password
Please enter old password
Cancel Clear
Please enter new password
Confirm new password
Press OK to enter sub menu.
Using the numeric keys enter the old password followed by your new password.
Enter the new password again to confirm.
Block ProgramUse , / .If the channel is locked you will be prompted to enter a password before you can access the channel.
▲▼ to select the channel and press Green buttom to lock unlock the channel
Hotel Setting
Hotel Setting
Lock Channel
Set Source
Channel Number
Picture Lock
Key Lock
Max Volume
Source Lock
Clear Lock
Hotel Lock On
On
Off
0
Off
Off
100
Move Adjust QuitEXIT
Use , ▲▼ to select the use ◄►to select On/Off.Hotel Lock
Hotel Lock
Lock ChannelUse , ▲▼ to select the use ◄►to select On/Off.Lock Channel
On: Select Hotel Lock the following sub-menu.
Off: Unable to select Hotel Lock submenu.
On:
Off: Able to select setup in the menu.
Unable to select setup in the menu.Channel
Channel
Hotel LockUse / to select the Hotel Lock, use / to select On/Off.On: Select Hotel Lock the following sub-menu.Off: Unable to select Hotel Lock submenu.
Loch ChannelUse / to select the Lock Channel, use / to select On/Off.On: Unable to select Channel setup in menu.Off: Able to select Channel setup in menu.22
Set Password
Please enter old password
Cancel Clear
Please enter new password
Confirm new password
Press OK to enter sub menu.
Using the numeric keys enter the old password followed by your new password.
Enter the new password again to confirm.
Block ProgramUse , / .If the channel is locked you will be prompted to enter a password before you can access the channel.
▲▼ to select the channel and press Green buttom to lock unlock the channel
Hotel Setting
Hotel Setting
Lock Channel
Set Source
Channel Number
Picture Lock
Key Lock
Max Volume
Source Lock
Clear Lock
Hotel Lock On
On
Off
0
Off
Off
100
Move Adjust QuitEXIT
Use , ▲▼ to select the use ◄►to select On/Off.Hotel Lock
Hotel Lock
Lock ChannelUse , ▲▼ to select the use ◄►to select On/Off.Lock Channel
On: Select Hotel Lock the following sub-menu.
Off: Unable to select Hotel Lock submenu.
On:
Off: Able to select setup in the menu.
Unable to select setup in the menu.Channel
Channel
Menu Operation
24
Set SourceUse / to select the default source which appears on the screen after power on.Channel Number (available in DTV/ATV source only).Use / to select the default Channel Number which appears on the screen after power on.Picture LockUse / to select the Picture Lock, use / to select On/Off.On: Unable to select Picture setup in the menu.Off: Able to select Picture setup in the menu.Key LockUse / to select the Key Lock, use / to select On/Off.On: To lock and invalidate the unction key.Off: To unlock and enable the unction key.Max VolumeUse / to select the Max Volume, use / to select a volume as maximum.Source LockUse / to select the Source Lock, use OK key to enter, select DTV/ATV/YPBPR/PC/HDMI1/HDMI2/AV/MEDIA source on or off.On: Make the source can not be selected.Off: Make the source available.Clear LockUse / to select the Clear Lock, use OK key to clear.
Input Source
Change InputPress source button to display the source menu. Use / to select the input source, press OK to confirm.
23
Input Source
DTV
ATV
YPBPR
PC
HDMI1
HDMI2
AV
MEDIA
Move SelectOK QuitEXIT
Change inputPress source button to display the source menu . Use ,
confirm.
▲▼ to select the input source press OK to
INPUT SOURCE
Set Source
ource which appears on the screen after power on.
Channel Number(available )
Channel Number which appears on the screen after power on.
Picture Lock
Picture Lock
Picture
Picture
Key Lock
Key Lock
Max Volume
Max Volume
Source Lock
Source Lock
Clear Lock
Clear Lock clear.
Use to select the default s
in DTV/ATV source only
Use ◄► to select the default
Use ▲▼ to select the , use ◄►to select On/Off.
On: Unable to select setup in the menu.
Off: Able to select setup in the menu.
Use ▲▼ to select the , use ◄►to select On/Off.
On: To lock&invalidate the function key.
Off: To unlock&enable the function key.
Use ▲▼ to select the , use ◄►to select a volume as maximum.
Use ▲▼ to select the , use OK key enter , select DTV/ATV/YPBPR/PC/HDMI1/HDMI2/AV
/MEDIA source on/off.
On: Make the source can not be selected.
Off: Make the source available.
Use ▲▼ to select the , use OK key
◄►
Menu Operation
25
EPG and Channel List Menu
Move: Use / to select programmeEXIT: exit EPG.OK: View the highlighted programme.Index: switch to type option.Record: Press REC button to enter a window to book a recording, see page 34 for details.Schedule: Press YELLOW key to show a list of scheduled recordings.Remind: Press GREEN button to enter a sub window to book a reminder. You can select the channel, repeat mode, minute and hour, date and month using the / / / buttons.
When a reminder has been set and the time arrives, a window will appear on the display and the channel will change after 10 seconds. You can also intercept and confirm the change by pressing .
24
TIME --
TIME
Program EPG
Move QuitEXITOK Select ScheduleRemind
31 May 13 36 :
700 BBC Radio 1 Edith Bowman
31 May 2010 13:00-18:00
EPG and Channel List Menu
Use ◄► to select
between TIME and
CHANNEL modes
Detailed informationfor the highlightedprogram.
Use ▲▼ .
Moveto select programme
702 BBC Radio 2 Steve Wright in the Afternoon
703 BBC Radio 3 Afternoon on 3
704 BBC Radio 4 Afternoon Play: JACK's Love
721 heat Uptemp party Pop
The best rock thranks including the 3
form 1S.
1/1
IndexIndex RecordRECORD
EXIT
exit EPG.
switch to type option.
Index
OKView the highlighted programme.
SchedulePress YELLOW key to show a list of scheduled recordings.
RecordPress REC button to enter a window to book a recording, see page 34 for details.
RemindPress GREEN button to enter a sub window to book a reminder.You can select the channel, repeat mode, minute and hour, date and month using the ◄►▲▼
buttons.
When a reminder has been set and the time arrives, a window will appear on the display and the
channel will change after 10 seconds.
You can also intercept and confirm the change by pressing ◄.
Favourite List
Press FAV button to display the Favorite Channel List.
This is a list ofprograms thatare scheduled tobe shown by thebroadcaster.
Reminder Setting
◄ - + ►2 ABC TV Melbourne
◄ ►12
◄ ►00
◄ ►DTV
◄ ►1
◄ ►30
Move SelectOK BackMENU
Mode
Minute
Hour
Date
Month
Use
13
Move BackMENU OK Select QuitEXIT
Auto Scan
Move OK OK ExitEXIT
Country
Tune Type
Australia
ATV+DTV
7 . MENU OPERATION
CHANNEL Menu
Note
all other input modes.
CHANNEL can be only selected under ATV/DTV mode. The CHANNEL menu is disabled while in
CHANNEL
Auto Scan
DTV Manual Tuning
ATV Manual Tuning
Program Edit
Signal information
Record Start
Move BackMENU OK Select QuitEXIT
CHANNEL
ATV Manual Tuning
Program Edit
Signal information
Record Start
Recorded List
Recorded Mode
Schedule List
PVR File System
Press to set the OSD language/Country/Tune Type and press OK to begin auto tuning.▲▼◄►
Press MENU button display the main menu, use CHANNEL ,
, .
to ◄► to select menu press OK or
to enter and press menu to return to the main menu
▼
Installation Guide
Move SelectOK QuitEXIT
Please set the following options, then
Press OK button to begin auto tuning.
OSD Lauguage
Country
Tune Type
English
Australia
ATV+DTV
In ATV/DTV mode press the MENU button to enter the main menu. A window will appear, use ◄►to scroll through the following menu headings: CHANNEL, PICTURE, SOUND, TIME, OPTION
and LOCK. Press ▼ or OK to enter the sub menus under the headings listed above.
While in MENU mode, press the MENU button to return to the previous menu window, or press
EXIT to exit menu mode completely.
Auto Scan
INSTALLATION GUIDE
Backlight Mode
Move SelectOK QuitEXIT
Default
Dynamic
Mild
Standard
Press to set the TV backlight mode and press OK to begin auto tuning.▲▼◄►
to select between TIME and CHANNEL modes.
This is a list of programs that are scheduled to be shown by the broadcaster.
Detailed information for the highlighted program.
24
TIME --
TIME
Program EPG
Move QuitEXITOK Select ScheduleRemind
31 May 13 36 :
700 BBC Radio 1 Edith Bowman
31 May 2010 13:00-18:00
EPG and Channel List Menu
Use ◄► to select
between TIME and
CHANNEL modes
Detailed informationfor the highlightedprogram.
Use ▲▼ .
Moveto select programme
702 BBC Radio 2 Steve Wright in the Afternoon
703 BBC Radio 3 Afternoon on 3
704 BBC Radio 4 Afternoon Play: JACK's Love
721 heat Uptemp party Pop
The best rock thranks including the 3
form 1S.
1/1
IndexIndex RecordRECORD
EXIT
exit EPG.
switch to type option.
Index
OKView the highlighted programme.
SchedulePress YELLOW key to show a list of scheduled recordings.
RecordPress REC button to enter a window to book a recording, see page 34 for details.
RemindPress GREEN button to enter a sub window to book a reminder.You can select the channel, repeat mode, minute and hour, date and month using the ◄►▲▼
buttons.
When a reminder has been set and the time arrives, a window will appear on the display and the
channel will change after 10 seconds.
You can also intercept and confirm the change by pressing ◄.
Favourite List
Press FAV button to display the Favorite Channel List.
This is a list ofprograms thatare scheduled tobe shown by thebroadcaster.
Reminder Setting
◄ - + ►2 ABC TV Melbourne
◄ ►12
◄ ►00
◄ ►DTV
◄ ►1
◄ ►30
Move SelectOK BackMENU
Mode
Minute
Hour
Date
Month
Favourite ListPress FAV button to display the Favourite Channel List.
Menu Operation
26
Channel ListPress OK button to display a list of tuned channels.The status of the channels (Skip/Lock/Favourite) will also be displayed, see below.
Multimedia (USB) MenuMultimedia main menu style:
25
Channel List
Press OK button to display a list of tuned channels.
The status of the channels (Skip/Lock/Favourite) will also be displayed, see below.
Channel ListDTV
ATV
ATV
ATV
ATV
DTV
DTV
DTV
DTV
Select QuitEXITOK
5 Five
6 abc1
7 abc2
8 abc3
9 abc5
1 C-01
2 2C-01
3 3S-02
4 4S-03
Move
PHOTO
Disc:C
Multimedia main menu style:
Multimedia(USB) Menu
Discs
Multimedia
Operation
USB Status
Inserted USB
device info
Move MenuMENU OK SelectUSB 2.0
USB StatusIf a compatible USB is attached the logo will appear blue. If not USB is attached the logo will be grey.
Multimedia styleChoose from the menu across the top of the screen which file type you would like to play: Photo,
Music, Movie or Text.
DISC (HDD)Shows the inserted Each disc is assigned a letter from C onwards.HDD Discs.
25
Channel List
Press OK button to display a list of tuned channels.
The status of the channels (Skip/Lock/Favourite) will also be displayed, see below.
Channel ListDTV
ATV
ATV
ATV
ATV
DTV
DTV
DTV
DTV
Select QuitEXITOK
5 Five
6 abc1
7 abc2
8 abc3
9 abc5
1 C-01
2 2C-01
3 3S-02
4 4S-03
Move
PHOTO
Disc:C
Multimedia main menu style:
Multimedia(USB) Menu
Discs
Multimedia
Operation
USB Status
Inserted USB
device info
Move MenuMENU OK SelectUSB 2.0
USB StatusIf a compatible USB is attached the logo will appear blue. If not USB is attached the logo will be grey.
Multimedia styleChoose from the menu across the top of the screen which file type you would like to play: Photo,
Music, Movie or Text.
DISC (HDD)Shows the inserted Each disc is assigned a letter from C onwards.HDD Discs.
USB StatusIf a compatible USB is attached the logo will appear blue. If not USB is attached the logo will be grey.Multimedia styleChoose from the menu across the top of the screen which file type you would like to play: Photo,Music, Movie or Text.DISC (HDD)Shows the inserted HDD Discs. Each disc is assigned a letter from C onwards.
Menu Operation
27
Inserted USB device infoDisplays USB version of the device that is attached, for example if a USB 2.0 device is attached, 2.0 will be displayed. When no device is attached it will display ‘No Device’.
Disc: Show the current disc.
Operation guide: Operational buttons o n the remote / / / , Menu and OK.
Multimedia main board keypress instruction:The follows only list MM page and other relevant function, Menu, sleep and other systemfunction is not included. / : Move Focus to left/right, it can circle move.
/ : Turn up/down.
OK/Enter: Enter submenu.
PHOTOMultimedia PHOTO’s submenu layout:
26
Inserted USB device info
2.0 will be displayed. When no device is attached it will display 'No Device'.
Displays USB version of the device that is attached, for example if a USB 2.0 device is attached,
Operation guideOperational buttons on the remote ◄► , Menu and OK.▲▼
◄ ►/
▲ ▼/
OK/Enter
Multimedia main board keypress instruction:
The follows only list MM page and other relavant function, Menu, sleep and other systerm
function is not included.
Enter submenu.
Turn up/down.
Move Focus to left/right, it can circle move.
Return 200*200 1
UP.png 2.bmp
2
C:\
Resolution 1024x768Size 200KBytes
Date 2010/08/08Time 08/23/22
1/2
Delete Current Filt
1.bmp
Disc
File folders in disc,
press ok to enter
Picture overview
Page
Preview
Picture
information
PHOTO
Multimedia PHOTO’s submenu layout:
Page
DiscShow the current disc.
Indicates the total number of pages containing files. example as per picture - '1/2' represents page
1 of 2.
Picture list
Preview window
Displays a preview of the highlighted picture in the Picture list.
Use ◄►▲▼ to scroll through the picture list. Press OK to select the picture, a tick will appear on the file.
Press PLAY to view picture in full screen.
QuitEXITMove MenuMENUFull Screen
Add/Remove all
Add/Remove to playlistOK
Page: Indicates the total number of pages containing files. example as per picture - ‘1/2’ represents page 1 of 2.
Picture list: Use / / / to scroll through the picture list. Press OK to select the picture, a tick will appear on the file. Press PLAY to view picture in full screen.
Preview window: Displays a preview of the highlighted picture in the Picture list.
Menu Operation
28
Slide ShowWhen in Picture List mode you can select multiple pictures to be viewed as part of a Slide Show. Use / / / to scroll through the list, press OK when the desired pictures are highlighted.If you wish to highlight all pictures, press the GREEN button. Press the RED button to de-select all pictures. Press the PLAY button to enter Slide Show mode, the pictures will scroll after approximately 5 seconds.
27
Exit
Repeat
Rotate
Repeat ALL Play List Info. Zoom OutMusic
90
RotateRotate
90
Zoom In
A
Exit playing,enter previous menu.
Full screen playing of photos.
Clockwise/ counter clockwise turn pictures.
Press once to repeat once, press again to repeat all photos, press three times to disable the repeat function.
Play next file.
Play previous file.
Stop playing,enter list menu.
Slide ShowWhen in Picture List mode you can select multiple pictures to be viewed as part of a Slide Show.
Use ◄► to scroll through the list, press OK when the desired pictures are highlighted.
If you wish to highlight all pictures, press the GREEN button. Press the RED button to de-select all
pictures. Press the PLAY button to enter Slide Show mode, the pictures will scroll after
approximately 5 seconds.
▲▼
Return 2... 200-200
EQ 2564
Put.mp3
Asdkj.mp3 Dkj.mp3
2asd-200
C:\
Album:Title:Bit rate:Artist:Sampling:Year:Size:
BounceAsdkj 48KSarah20K2008600KBytes
Multimed a MUSIC submenu layout.
When selected songs in the list, press OK to show the songs preview, as follows:
i
Disc
File window
Page
Preview
Files
information
1/2
MUSIC
QuitEXITMove MenuMENUFull Screen
Add/Remove to playlistOK
Delete Current Filt
Add/Remove all
EXIT: Exit playing, enter previous menu. : Full screen playing of photos. : Stop playing, enter list menu. : Play previous file.
: Play next file.Repeat: Press once to repeat once, press again to repeat all photos, press three times to disable the repeat function.Rotate: Clockwise / counter clockwise turn picture.
MUSICMultimedia MUSIC submenu layout.When select songs in the list, press OK to show the songs preview, as follows:
27
Exit
Repeat
Rotate
Repeat ALL Play List Info. Zoom OutMusic
90
RotateRotate
90
Zoom In
A
Exit playing,enter previous menu.
Full screen playing of photos.
Clockwise/ counter clockwise turn pictures.
Press once to repeat once, press again to repeat all photos, press three times to disable the repeat function.
Play next file.
Play previous file.
Stop playing,enter list menu.
Slide ShowWhen in Picture List mode you can select multiple pictures to be viewed as part of a Slide Show.
Use ◄► to scroll through the list, press OK when the desired pictures are highlighted.
If you wish to highlight all pictures, press the GREEN button. Press the RED button to de-select all
pictures. Press the PLAY button to enter Slide Show mode, the pictures will scroll after
approximately 5 seconds.
▲▼
Return 2... 200-200
EQ 2564
Put.mp3
Asdkj.mp3 Dkj.mp3
2asd-200
C:\
Album:Title:Bit rate:Artist:Sampling:Year:Size:
BounceAsdkj 48KSarah20K2008600KBytes
Multimed a MUSIC submenu layout.
When selected songs in the list, press OK to show the songs preview, as follows:
i
Disc
File window
Page
Preview
Files
information
1/2
MUSIC
QuitEXITMove MenuMENUFull Screen
Add/Remove to playlistOK
Delete Current Filt
Add/Remove all
Menu Operation
29
MUSIC submenu equip description:
Page: Show pages.Preview window: Music picture.Files information: Show songs name and size etc.
MUSIC playing condition and keys function:MUSIC playing is the menu just like playing software in PC, mainly have playlist, basicinformation, processing sign, operation guide part,as follows:
28
AUD.MP3Album: Govergirl
Title: Far Amay From Home
Artist: Groove Goverage
Bit Rate: 96k Sampling: 48k
Year: 2002 Size: 529KBytes
AUD.MP3
Sanple.MP3
AUD_2.MP3
Repeat ALL Goto Time
00:01:00/01:00:45
1/1
MUSIC submenu equip description:
Files informationShow songs name and size etc.
Preview windowMusic picture.
PageShow pages.
MUSIC playing conditon and keys function
MUSIC playing is the menu just like playing software in PC, mainly have Playlist、basic
information, processing sign, operation guide part,as follows:
Songs name
Songs infor
MUSIC image
Operation guide
Songs list
Songs nameCurrent songs name.
MUSIC imageOne image used to sign MUSIC.
Songs listSongs marked in Browser,from the top files on, orders by letters.
Playing timeShow playing time and in total,such as 00:01:23/00:04:56 format.
Operation guideShow current operation guide.
Processing signShow current procession time and rate.
Screen Mute
Remove all form playlist
Remove
Play Time
▲▼◄►Scroll through songs on file list.
Stop playing.
OK/EnterPlay selected files.
Play Previous/next files.
/
Exit MUSIC playing menu.
Exit
Songs name: Current songs name.
MUSIC image: One image used to sign MUSIC.
Songs list: Songs marked in Browser,from the top files on, orders by letters.
Playing time: Show playing time and in total,such as 00:01:23/00:04:56 format.
Operation guide: Show current operation guide.
Processing sign: Show current procession time and rate.
OK/ENTER: Play selected files.
EXIT: Exit MUSIC playing menu.
/ / / : Scroll through songs on file list.
: Stop playing.
/ : Play previous / next file.
Menu Operation
30
/ : Fast forward and fast reverse.Repeat: Repeat playing,can choose repeat 1, repeat all, and disable repeat mode.
MOVIEVideo format: AVI etc.Enter the MOVIE menu and scroll through the files using / / / the keys.
Press OK to select the file and to view a preview as above.Press PLAY to view the file in full screen.
29
Repeat ALL Goto Time
00:00:00/00:50:00
SetA
A/B
Play List Info. Slow Step Zoom In
Return 200*200 2 3
C:\
Resolution: 800x336Audio Track: 1/1Subtitle:Artist:Prpgram:Size: 122311 KBytes
1/2
Enter the movie menu and scroll through the files using the ◄► keys. ▲▼
Press OK to select the file and to view a preview as above.
Press PLAY to view the file in full screen.
MOVIE
Fast forward and fast reverse.
RepeatRepeat playing,can choose repeat 1, repeat all, and disable repeat mode.
Preview window
File information
File list
, , .
Set A/BSet A/B circle playing.
File listYou can scroll through the file list using ◄► . Press OK to select a file and view a preview,
you can also select multiple files to be played in sequence.
Press PLAY to view selected file in full screen.
NoteLarger files may take longer to load, please wait for the file to load.
Some files may not play even though they are the correct format.
RepeatCan choose repeat1 repeat all repeat none
▲▼
QuitEXITMove MenuMENUFull Screen
Add/Remove to playlistOK
Video format: AVI e c.t
Delete Current Filt
Add/Remove all
29
Repeat ALL Goto Time
00:00:00/00:50:00
SetA
A/B
Play List Info. Slow Step Zoom In
Return 200*200 2 3
C:\
Resolution: 800x336Audio Track: 1/1Subtitle:Artist:Prpgram:Size: 122311 KBytes
1/2
Enter the movie menu and scroll through the files using the ◄► keys. ▲▼
Press OK to select the file and to view a preview as above.
Press PLAY to view the file in full screen.
MOVIE
Fast forward and fast reverse.
RepeatRepeat playing,can choose repeat 1, repeat all, and disable repeat mode.
Preview window
File information
File list
, , .
Set A/BSet A/B circle playing.
File listYou can scroll through the file list using ◄► . Press OK to select a file and view a preview,
you can also select multiple files to be played in sequence.
Press PLAY to view selected file in full screen.
NoteLarger files may take longer to load, please wait for the file to load.
Some files may not play even though they are the correct format.
RepeatCan choose repeat1 repeat all repeat none
▲▼
QuitEXITMove MenuMENUFull Screen
Add/Remove to playlistOK
Video format: AVI e c.t
Delete Current Filt
Add/Remove all
Repeat: You can choose repeat 1, repeat all, repeat none.Set A/B: Set A/B circle playing.File list: You can scroll through the file list using / / / . Press OK to select a file and view a preview, you can also select multiple files to be played in sequence. Press PLAY to view selected file in full screen.NOTE: Larger files may take longer to load, please wait for the file to load. Some files may not play even though they are the correct format.
Menu Operation
31
Info: Displays the highlighted file’s information including resolution, audio track, subtitle, artist and size.Goto: This function allows you to jump to a preset time during playback. Press GOTO, a window will appear displaying time in hour minutes and seconds as follows 00:00:00.Enter the time you would like to jump to using the numeric keys.Press OK to confirm.
TEXT
Chose TEXT files, press OK and it shows the above frame.Press play to start full screen playing as follows:
30
#Czech 0#Danish 1#German 2#Engelsh 3#Spanish 4#Greek 5en_str_Picture_Text.0=OBRAZen_str_Picture_Text.1=BILLEDEen_str_Picture_Text.2=BILDen_str_Picture_Text.3=PICTURE
Prev Page Next Page NextPrev. Stop Music Play List Info.
Return 2... 200-200
EQ 2564
put.text
jack.text
2asd-200
C:
Size: 60KBytes
1/2
jack1.text
Pet
Puppy Linux
Make
jack.txt
Choose TEXT files, press OK and it shows the above frame.
Press play to start full screen playing as follows:
Info
Displays the highlighted file's information including resolution, audio track, subtitle, artist and size.
GotoThis function allows you to jump to a preset time during playback. Press GOTO, a window will
appear displaying time in hour minutes and seconds as follows 00:00:00.
Enter the time you would like to jump to using the numeric keys.
Press OK to confirm.
TEXT
previous page.
Next pagePlay next page.
Prev.Play previous files.
NextPlay next files.
Prev pagePlay
Remove all form playlist
QuitEXITMove MenuMENUFull Screen
Add all to playlist
Add/Remove to playlistOK
30
#Czech 0#Danish 1#German 2#Engelsh 3#Spanish 4#Greek 5en_str_Picture_Text.0=OBRAZen_str_Picture_Text.1=BILLEDEen_str_Picture_Text.2=BILDen_str_Picture_Text.3=PICTURE
Prev Page Next Page NextPrev. Stop Music Play List Info.
Return 2... 200-200
EQ 2564
put.text
jack.text
2asd-200
C:
Size: 60KBytes
1/2
jack1.text
Pet
Puppy Linux
Make
jack.txt
Choose TEXT files, press OK and it shows the above frame.
Press play to start full screen playing as follows:
Info
Displays the highlighted file's information including resolution, audio track, subtitle, artist and size.
GotoThis function allows you to jump to a preset time during playback. Press GOTO, a window will
appear displaying time in hour minutes and seconds as follows 00:00:00.
Enter the time you would like to jump to using the numeric keys.
Press OK to confirm.
TEXT
previous page.
Next pagePlay next page.
Prev.Play previous files.
NextPlay next files.
Prev pagePlay
Remove all form playlist
QuitEXITMove MenuMENUFull Screen
Add all to playlist
Add/Remove to playlistOK
Prev Page: Play previous page.Next Page: Play next page.Prev. : Play previous files.Next: Play next files.
Menu Operation
32
STOP: Stop playing and Exit to browser menu.Playlist: Show play list.Info: Displays the current file’s information including file name and size. PVR Menu
PVR function is only available for DTV,includes Record,Time shift and Playback function.
NOTE: • WhenPVRfunctionisinprogress,pleasedon’tunplugthepowerandtheexternal
USBdeviceatwill.• WhenPVRfunctionisstandby,thepowerindicatorwillblinkwithredandgreen
consecutively.• WhenPVRfunctionisactive,thepowerindicatorwillblinkwithgreen.• Beforestartrecordingaprogram,pleasemakesuretheexternalUSBdeviceis
connected.• Whilerecording,iftheavailablestoragespacebecomeslow,therecordingwillbe
automaticallystopped.
PVR File SystemEnter PVR from CHANNEL menu, as follows:
USB Disk: If a compatible USB device is attached, this will indicate “PASS”. If no device is attached, it will appear grey.Format: You USB device will need to be formatted before it can be used for PVR functions.NOTE: FormattingaUSBdevicewilleraseanyexistingdataonthedevice,backupallexistingdata.Largerdeviceswilltakelongertoformat.Time Shift Size: Can’t be chosen. After check PVR File System, it means the USB passed Master Format and can be used at Time Shift Space, the size is chosen by clients when doing format.Speed: Displays the speed of the attached USB device.
31
PVR File Syetem
Select Disk C:
Move SelectOK BackMENU
Check PVR File Syetem Start
USB Disk
Format
Time Shift Size
Speed
PVR menu
PVR function is only available for DTV,includes Record,Timeshift and Playback function.
If a compatible USB device is attached, this will indicate 'PASS'. If no device is attached it will appear grey.
USB Disk
Speed
Can’t be chosen. After Check PVR File System,it means the USB passed Mstar Format and can be used
At Timeshift space,the size is choosen by clients when doing format.
Time Shift Size
StopS playing and Exit to Browser menu
PlaylistShow play list.
InfoDisplays the current file's information including file name and size.
top .
FormatYour USB device will need to be formatted before it can be used for PVR functions.
Displays the speed of the attached USB device.
NoteFormatting a USB device will erase any existing data on the device, back up all existing data.
Larger devices will take longer to format.
PVR File SystemEnter VR from CHANNEL menu, as follows: P
NoteWhen PVR function is in progress, please don’t unplug the power and the external USB device at will.
When PVR function is standby, the power indicator will blink with red and green consecutively.
When PVR function is active, the power indicator will blink with green.
Before start recording a program, please make sure the external USB device is connected.
While recording, if the available storage space becomes low, the recording will be automatically
stopped.
Menu Operation
33
Select DiskChoose the drive for PVR, C: is the default drive.
Channel - Recorded ListTo view a list of recorded programs.
Title: Recorded List.Ordering: Show in title right, means the current ordering way, Index key can switch option: Programme -> Channel ->Time, which make orders by programme name, channel order and record time.
Mark: Show current condition, recorded programme shows no mark, if shows
32
Channel - Recorded ListTo view a list of recorded programs.
Recorded List Programme
8 Simples Rules
Before Winter Comes
Before Winter Comes
Love Comes Softly
INFO
Index
Delete
OK Select
INFO
Index
File System Size
PVR File System Type
PVR File System Size
SD104 Mins
HD 29 Mins
Hi Speed FS
ALL
Move SelectOK
Select DiskChoose the drive for PVR, C: is the default drive.
Check PVR File SystemPress 'OK' button to check if your USB device is ready for PVR functions. If the disc is formatted
and compatible it will display 'SUCCESS', if the disc is not ready it will display 'FAIL'.
Select Disk
USB
Disk
0
C:
Move SelectOK
Show current condition,recoreded programme shows no mark, if shows means recording,and
if it shows ,it means on the playing,if Focused,it shows color image,otherwise it is gray.
Mark
Recorded List.Title
Programme -> Channel -> Time,which make orders by programme name, channel order and record
time.
Show in title right,means the current ordering way,Index key can switch option:
Ordering
BackMENU
means recording, and if it shows , it means on the playing, if Focused, it shows color image, otherwise it is gray.
32
Channel - Recorded ListTo view a list of recorded programs.
Recorded List Programme
8 Simples Rules
Before Winter Comes
Before Winter Comes
Love Comes Softly
INFO
Index
Delete
OK Select
INFO
Index
File System Size
PVR File System Type
PVR File System Size
SD104 Mins
HD 29 Mins
Hi Speed FS
ALL
Move SelectOK
Select DiskChoose the drive for PVR, C: is the default drive.
Check PVR File SystemPress 'OK' button to check if your USB device is ready for PVR functions. If the disc is formatted
and compatible it will display 'SUCCESS', if the disc is not ready it will display 'FAIL'.
Select Disk
USB
Disk
0
C:
Move SelectOK
Show current condition,recoreded programme shows no mark, if shows means recording,and
if it shows ,it means on the playing,if Focused,it shows color image,otherwise it is gray.
Mark
Recorded List.Title
Programme -> Channel -> Time,which make orders by programme name, channel order and record
time.
Show in title right,means the current ordering way,Index key can switch option:
Ordering
BackMENU
Check PVR File SystemPress ‘OK’ button to check if you USB device is ready for PVR functions, If the disc is formatted and compatible it will displays ‘SUCCESS’, if the disc is not ready, it will display ‘FAIL’.
32
Channel - Recorded ListTo view a list of recorded programs.
Recorded List Programme
8 Simples Rules
Before Winter Comes
Before Winter Comes
Love Comes Softly
INFO
Index
Delete
OK Select
INFO
Index
File System Size
PVR File System Type
PVR File System Size
SD104 Mins
HD 29 Mins
Hi Speed FS
ALL
Move SelectOK
Select DiskChoose the drive for PVR, C: is the default drive.
Check PVR File SystemPress 'OK' button to check if your USB device is ready for PVR functions. If the disc is formatted
and compatible it will display 'SUCCESS', if the disc is not ready it will display 'FAIL'.
Select Disk
USB
Disk
0
C:
Move SelectOK
Show current condition,recoreded programme shows no mark, if shows means recording,and
if it shows ,it means on the playing,if Focused,it shows color image,otherwise it is gray.
Mark
Recorded List.Title
Programme -> Channel -> Time,which make orders by programme name, channel order and record
time.
Show in title right,means the current ordering way,Index key can switch option:
Ordering
BackMENU
32
Channel - Recorded ListTo view a list of recorded programs.
Recorded List Programme
8 Simples Rules
Before Winter Comes
Before Winter Comes
Love Comes Softly
INFO
Index
Delete
OK Select
INFO
Index
File System Size
PVR File System Type
PVR File System Size
SD104 Mins
HD 29 Mins
Hi Speed FS
ALL
Move SelectOK
Select DiskChoose the drive for PVR, C: is the default drive.
Check PVR File SystemPress 'OK' button to check if your USB device is ready for PVR functions. If the disc is formatted
and compatible it will display 'SUCCESS', if the disc is not ready it will display 'FAIL'.
Select Disk
USB
Disk
0
C:
Move SelectOK
Show current condition,recoreded programme shows no mark, if shows means recording,and
if it shows ,it means on the playing,if Focused,it shows color image,otherwise it is gray.
Mark
Recorded List.Title
Programme -> Channel -> Time,which make orders by programme name, channel order and record
time.
Show in title right,means the current ordering way,Index key can switch option:
Ordering
BackMENU
Menu Operation
34
Programme name: The programme name is construct by channel number and record channel number.Operation guide: Show the current available operation.
/ : Up and down to move Focus to select programme. / OK/Enter : Close/pop out the programme instruction.
Info/Display: Pop out or close the programme instruction.DELETE: Delete Focused programme.
PVR - Record Mode
Press MENU to display main menu, use / to select CHANNEL menu, then press choose the recorded mode.
Title: Shows current channel name then press / to choose the channel you would like.Mode: Press / to show order: Once -> Everyday -> Weekly -> Auto.Start Time: Press / to select the start recording time.End Time: Press / to select the end recording time.After the above settings, the machine will display a list.
33
PVR –Record Mode
Press ◄►to switch order:Once -> Everyday -> Weekly -> Auto.
Press ◄► to select the start recording time.
Press ◄►to select the end recording time.
TitleShows current channel name then press choose the channel you would like.◄► to
Recorded Mode
09 Jun 18:14
Once
Start Time
Mode
Month
Date
Jan
2010/05/04
End Time
Minute
Hour
00
00
Month
Date
Jan
2010/05/04
Minute
Hour
00
00
20 ABC HDTV
Move SelectOK BackMENU
Prgramme nameThe programme name is construct by channel number and record channel number.
Operation guide
Show the current available operation.
Pop out or close the programme instruction.
DELETEDelete Focused programme.
▲▼Up and down to move Focus to select programme.
Close pop out the programme instruction./◄►/OK/Enter
Info/Display
Mode
Start Time
End Time
Press MENU to display main menu, use ◄►to select CHANNEL menu, then press recorded mode.
▼ choose the
After the above settings, the machine will appear a list will burn.
Menu Operation
35
PVR - Recorder ScheduleMenu and function
NOTE:1. List timer recording will start according to date and time priority.2. New items will be added to the end of the list.3. It enters the menu when recording, Focus on current recording plans.
Menu: Exit Recorder Schedule List menu, enter PVR menu, Focus on Recorder Schedule List.Move: Move Focus up and down.Delete: Delete Focus items.Exit: Exit menu.
PVR Shortcut function
32
Channel - Recorded ListTo view a list of recorded programs.
Recorded List Programme
8 Simples Rules
Before Winter Comes
Before Winter Comes
Love Comes Softly
INFO
Index
Delete
OK Select
INFO
Index
File System Size
PVR File System Type
PVR File System Size
SD104 Mins
HD 29 Mins
Hi Speed FS
ALL
Move SelectOK
Select DiskChoose the drive for PVR, C: is the default drive.
Check PVR File SystemPress 'OK' button to check if your USB device is ready for PVR functions. If the disc is formatted
and compatible it will display 'SUCCESS', if the disc is not ready it will display 'FAIL'.
Select Disk
USB
Disk
0
C:
Move SelectOK
Show current condition,recoreded programme shows no mark, if shows means recording,and
if it shows ,it means on the playing,if Focused,it shows color image,otherwise it is gray.
Mark
Recorded List.Title
Programme -> Channel -> Time,which make orders by programme name, channel order and record
time.
Show in title right,means the current ordering way,Index key can switch option:
Ordering
BackMENU
: Enter Record mode. : Enter time shift mode.
NOTE:Record and Recorded List can be enter from PVR menu.Record: Record menu includes two kind, one is Full Mode, the other is Simple Mode. At simple mode, there is only power indicator blinking but no operation menu display.They can switch by
32
Channel - Recorded ListTo view a list of recorded programs.
Recorded List Programme
8 Simples Rules
Before Winter Comes
Before Winter Comes
Love Comes Softly
INFO
Index
Delete
OK Select
INFO
Index
File System Size
PVR File System Type
PVR File System Size
SD104 Mins
HD 29 Mins
Hi Speed FS
ALL
Move SelectOK
Select DiskChoose the drive for PVR, C: is the default drive.
Check PVR File SystemPress 'OK' button to check if your USB device is ready for PVR functions. If the disc is formatted
and compatible it will display 'SUCCESS', if the disc is not ready it will display 'FAIL'.
Select Disk
USB
Disk
0
C:
Move SelectOK
Show current condition,recoreded programme shows no mark, if shows means recording,and
if it shows ,it means on the playing,if Focused,it shows color image,otherwise it is gray.
Mark
Recorded List.Title
Programme -> Channel -> Time,which make orders by programme name, channel order and record
time.
Show in title right,means the current ordering way,Index key can switch option:
Ordering
BackMENU
/ EXIT key.At Record mode, Record menu shows still.
34
PVR shortcut function
RecordRecord menu includes two kind, one is Full Mode,the other is Simple Mode. At Simple mode, there
is only power indicator blinking but no operation menu display.
They can switch by /EXIT key.
At Record mode, Record menu shows still.
Enter Timeshift mode;
PVR – Recorder ScheduleMenu and function
Schedule List
Mode Time Date Programme Title ResultChannel Name
Delete QuitEXITMove BackMENU
18:14 09th Jun
Note1.List timer recording will start according to date and time priority.
2.Newly added items will be last on the listed.
3.It enter the menu when recording,Focus on current recording plans.
A TOU 19:28-20:20 Satos Jun New Tanks 2 ABC TV
Exit menu;ExitDelete Focus items;Delete
Move Focus up and down;MoveExit Recorder Schedule List menu,enter PVR menu,Focus on Recorder Schedule List;Menu
Enter Record mode;
NoteRecord and Recorded List can be enter from PVR menu.
Menu Operation
36
The details is as follows:
Full Mode:
Stop: Exit Record, shows processing.
32
Channel - Recorded ListTo view a list of recorded programs.
Recorded List Programme
8 Simples Rules
Before Winter Comes
Before Winter Comes
Love Comes Softly
INFO
Index
Delete
OK Select
INFO
Index
File System Size
PVR File System Type
PVR File System Size
SD104 Mins
HD 29 Mins
Hi Speed FS
ALL
Move SelectOK
Select DiskChoose the drive for PVR, C: is the default drive.
Check PVR File SystemPress 'OK' button to check if your USB device is ready for PVR functions. If the disc is formatted
and compatible it will display 'SUCCESS', if the disc is not ready it will display 'FAIL'.
Select Disk
USB
Disk
0
C:
Move SelectOK
Show current condition,recoreded programme shows no mark, if shows means recording,and
if it shows ,it means on the playing,if Focused,it shows color image,otherwise it is gray.
Mark
Recorded List.Title
Programme -> Channel -> Time,which make orders by programme name, channel order and record
time.
Show in title right,means the current ordering way,Index key can switch option:
Ordering
BackMENU
/ Exit: Switch Record menu mode.Play: Enter playback mode, play it from the star recorded programme. Check playback instruction in details.
Time ShiftTime Shift menuTime shift is similar with Record menu, includes two kind: one is Full Mode and the other isSimple Mode. They can switch by Exit key. At Time shift mode, Time shift keeps still.
Full Mode: Simple Mode:
35
Channel name and Programme name
Full Mode:
Play FB FF NextPrev StopPause
5 Five Before Winter Comes
[00:00:20]
14:30
[0000:10:20]
/Exit
Enter Playback mode, play it from the start recorded programme Check Playback instruction in details;
Max Recording TimeRecording Time
The details is as follows:
StopExit Record,shows Processing;
Switch Record menu mode;
Play
Timeshift menuTimeshift is similar with Record menu, includes two kind: one is Full Mode and the other is
Simple Mode. They can switch by Exit key. At Timeshift mode, Timeshift keeps still.
NoteAt Simple Mode,it shows current Timeshift playing conditon, such as Play,Pause;
Simple Mode shows on the right down side;
Play FB FF NextPrev StopPause
[00:00:00/00:50:00]
Simple Mode:
SS
Full Mode:
Timeshift
SHIFT TIME/MAX SHIFT TIME
Current Time
Enter Timeshift to press ,and the image paused and it start record from the paused position.
Timeshift Start conditon
Stop Timeshift.
Swich Timeshift menu mode.
Timeshift conditon
Exit
Stop
Enter Timeshift Play condition;
Play
35
Channel name and Programme name
Full Mode:
Play FB FF NextPrev StopPause
5 Five Before Winter Comes
[00:00:20]
14:30
[0000:10:20]
/Exit
Enter Playback mode, play it from the start recorded programme Check Playback instruction in details;
Max Recording TimeRecording Time
The details is as follows:
StopExit Record,shows Processing;
Switch Record menu mode;
Play
Timeshift menuTimeshift is similar with Record menu, includes two kind: one is Full Mode and the other is
Simple Mode. They can switch by Exit key. At Timeshift mode, Timeshift keeps still.
NoteAt Simple Mode,it shows current Timeshift playing conditon, such as Play,Pause;
Simple Mode shows on the right down side;
Play FB FF NextPrev StopPause
[00:00:00/00:50:00]
Simple Mode:
SS
Full Mode:
Timeshift
SHIFT TIME/MAX SHIFT TIME
Current Time
Enter Timeshift to press ,and the image paused and it start record from the paused position.
Timeshift Start conditon
Stop Timeshift.
Swich Timeshift menu mode.
Timeshift conditon
Exit
Stop
Enter Timeshift Play condition;
Play
35
Channel name and Programme name
Full Mode:
Play FB FF NextPrev StopPause
5 Five Before Winter Comes
[00:00:20]
14:30
[0000:10:20]
/Exit
Enter Playback mode, play it from the start recorded programme Check Playback instruction in details;
Max Recording TimeRecording Time
The details is as follows:
StopExit Record,shows Processing;
Switch Record menu mode;
Play
Timeshift menuTimeshift is similar with Record menu, includes two kind: one is Full Mode and the other is
Simple Mode. They can switch by Exit key. At Timeshift mode, Timeshift keeps still.
NoteAt Simple Mode,it shows current Timeshift playing conditon, such as Play,Pause;
Simple Mode shows on the right down side;
Play FB FF NextPrev StopPause
[00:00:00/00:50:00]
Simple Mode:
SS
Full Mode:
Timeshift
SHIFT TIME/MAX SHIFT TIME
Current Time
Enter Timeshift to press ,and the image paused and it start record from the paused position.
Timeshift Start conditon
Stop Timeshift.
Swich Timeshift menu mode.
Timeshift conditon
Exit
Stop
Enter Timeshift Play condition;
Play
NOTE:At Simple Mode,it shows current Time shift playing condition, such as Play or Pause.Simple Mode shows on the right down side.
Time shift condition
Time shift start conditionEnter Time shift to press ,and the image paused and it start record from the paused position.Stop: Stop Time shift.Exit: Switch Time shift menu mode.Play: Enter Time shift Play condition.
Menu Operation
37
Time shift PlayAt Time shift Play condition, the system record DTV and play it at the same time.Time shift Play is start by press ,at Time shift Play condition, it can work Pause,Fast Forward, Fast Rewind and it would enter A->B circle playing condition.
Time shift RecordTime shift Record condition, similar to Record mode.
PlaybackPlayback is similar with Time shift,one is Full Mode,and the other is Simple Mode, they can be switch by Exit key.At Playback mode, Playback shows still.
Full Mode:
NOTE: At Simple mode, there is only power indictor blinking but no operation menu display.
36
Timeshift Play
At Timeshift Play condition, the system record DTV a d play it at the same time.
Timeshift Play is start by press ,at Timeshift Play condition, it can work Pause,Fast Forward,
Fast Rewind,and it would enter A->B circle playing condition.
n
PlaybackPlayback is similar with Timeshift,one is Full Mode,and the other is Simple Mode, they can be
switch by Exit key.
At Playback mode,Playback shows still.
At Simple mode, there is only power indicator blinking but no operation menu display.
Note
Play FB FF NextPrev StopPause
00:00:00/00:50:00
Full Mode:
18:13
Timeshift Record
Timeshift Record condition,similar to Record mode.
Menu Operation
38Troubleshooting and Advise
Troubleshooting
Control
No Signal Please check that all cables are correctly plugged in.
No Colour Shades Adjust the contrast, the colour and the brightness.
Stain show on the screenMaybe result from a lighting signal from car, motor, neon light and other electrical devices or appliances.
Double or multiple display image Maybe the result of an electrical wave disturb from other TV, Computer and Game machine or Radio.
Snow on the screen The cables of the antenna are not correctly plugged in.
The remote control does not workPlease check the batteries order and alignment, check that the IR of the remote control is not hid-den by something.
“Zip” made noise on TV cover Even if the display image is correct, the noise may come from an unsteady fixation of the panel.
No Sound Make sure that you have not press the MUTE but-ton of the panel or of the remote control.
Please check if you can solve the troubleshooting by yourself.
39
Model GVA22FLEDA
Display Type TFT LED
Resolution (Pixel) 1920 x 1080
Aspect Ratio 16: 9
Power Supply DC 12V IN
Power Consumption 36W
TV System PAL
Video Input Format PAL/NTSC
Audio Output Power L/R 2 x 3W
SUPPORT
ANTENNA YES
AV-IN YES
YPbPr-IN YES
HDMI-IN YES
VGA (PC)-IN YES
VGA (PC) AUDIO-IN YES
SCART - -
EARPHONE - OUT YES
S-VIDEO - IN - -
COAXIAL - OUT YES
COMMON INTERFACE - -
USB YES
DVDDisc Physical Format - -
DVD Video Output Format - -
Specifications
This manual is only for you reference, any change to the design and specification will not be advised.
40Notes
41Notes