210 Watt - lineatrovata.com · | E-mail: [email protected] EN-STD-Ud-NO1.01-Rev 2010...
Transcript of 210 Watt - lineatrovata.com · | E-mail: [email protected] EN-STD-Ud-NO1.01-Rev 2010...
STP210 - 18/UdSTP205 - 18/Ud
www.suntech-power.com©Copyright 2010 Suntech Power EN-STD-Ud-NO1.01-Rev 2010
High module conversion efficiency (up to 14.3%), through superior manufacturing technology
Guaranteed 0-5W positive power output tolerance ensures high reliability
Anti-reflective, hydrophobic coating improves light absorption and reduces surface dust
Three bus-bar design enhances cell reliability and reduces series resistance for large fill factor
Excellent performance under low light environments (mornings, evenings and cloudy days)
Entire module certified to withstand high wind loads (2400 Pascal) and snow loads (5400 Pascal) *
POLYCRYSTALLINE SOLAR MODULE210 Watt
0-5W
Self-clean
2400Pa 5400Pa
Features
3 bus bar
Weak light
14.3%
Specially designed on drainage holes and rigid construction prevent frame from deforming or breaking due to freezing weather and other forces
Latest IP67 rated junction box improves module performance stability with enhanced thermal isolation.
World’s leading manufacturer of crystalline silicon photovoltaic modulesUnrivaled manufacturing capacity and world-class technologyRigorous quality control meeting the highest international standards : ISO 9001: 2008 and ISO 14001: 2004Certi!cation and standards: IEC 61215, IEC 61730, UL 1703, conformity to CE
* Please refer to Suntech Standard Module Installation Manual for details.** Please refer to Suntech Product Warranty for details.
Industry-leading warranty
Trust Suntech to Deliver Reliable Performance Over Time
25 year transferrable power output warranty: 5 year/95%, 12 year/90%, 18 year/85%, 25 year/80% **Based on nominal powerWarrants 6.7% more power than the market standard over 25 years5 year material and workmanship warranty
STP210 - 18/UdSTP205 - 18/Ud
EN-STD-Ud-NO1.01-Rev 2010www.suntech-power.com | E-mail: [email protected]
Current-Voltage & Power-Voltage Curve (210-18)
Specifications are subject to change without further notification
Electrical CharacteristicsSTC STP210-18/Ud STP205-18/Ud
Optimum Operating Voltage (Vmp) 26.4 V 26.3 V
Optimum Operating Current (Imp) 7.95 A 7.80 A
Open - Circuit Voltage (Voc) 33.6 V 33.5 V
Short - Circuit Current (Isc) 8.33 A 8.23 A
Maximum Power at STC (Pmax) 210 Wp 205 Wp
Module E"ciency 14.3% 13.9%
Operating Temperature -40 °C to +85 °C -40°C to +85°C
Maximum System Voltage 1000 V DC 1000 V DC
Maximum Series Fuse Rating 20 A 20 A
Power Tolerance 0/+5 W 0/+5 W
STC: lrradiance 1000 W/m2, module temperature 25 °C, AM=1.5
NOCT STP210-18/Ud STP205-18/Ud
Maximum Power (W) 153 Wp 150 Wp
Maximum Power Voltage (V) 24.0 V 23.9 V
Maximum Power Current (A) 6.39 A 6.27 A
Open Circuit Voltage (Voc) 31.2 V 31.1 V
Short Circuit Current (Isc) 6.75 A 6.64 A
E"ciency Reduction(from 1000 W/m2 to 200 W/m2) <4.5% <4.5%
NOCT: Irradiance 800 W/m2, ambient temperature 20 °C, wind speed 1 m/s
Mechanical CharacteristicsSolar Cell Polycrystalline 156 # 156 mm (6 inches)
No. of Cells 54 (6 # 9)
Dimensions 1482 # 992 # 35 mm (58.3 # 39.1 # 1.4 inches)
Weight 16.8 kgs (37.0 lbs.)
Front Glass 3.2 mm (0.13 inches) tempered glass
Frame Anodized aluminium alloy
Junction Box IP67 rated
Output Cables
H+S RADOX® SMART cable 4.0 mm2 (0.006 inches2),symmetrical lengths (-) 1000 mm (39.4 inches) and (+) 1000 mm (39.4 inches), RADOX® SOLAR integrated twist locking connectors
Packing Con!gurationContainer 20’ GP 40’ GP 40’ HC
Pieces per pallet 26 26 26
Pallets per container 6 14 28
Pieces per container 156 364 728
Dealer information box
Temperature CharacteristicsNominal Operating Cell Temperature (NOCT) 45±2°C
Temperature Coe"cient of Pmax -0.47 %/°C
Temperature Coe"cient of Voc -0.34 %/°C
Temperature Coe"cient of Isc 0.045 %/°C
Note: mm [inch]
9
8
7
6
5
4
3
2
1
0
240
210
180
150
120
90
60
30
0
Curr
ent (
A)
Pow
er (W
)
Voltage (V)
0 10 20 30 40
1482[58.3]
1202[47.3]
702[27.6]
2-Ø5.1[Ø0.2]
14×9[0.55×0.35]
942[37.1]Junction box
(Back View)
1.5
35
35
11Section A-A
Ground holes2 places
Mounting slots 8 places
Drainage holes
A A
992[39.1]
(Front View)
Hazardous electricity can
shock, burn or cause death.
Do not touch terminals.
Model NumberRated Maximum PowerOutput ToleranceCurrent at PmaxVoltage at Pmax
Maximum Series Fuse RatingCell TechnologyApplication Class A
(Pmax
)
(Imp )(Vmp )(Isc )
All technical data at standard test conditionAM=1.5 E=1000W/m2
Tc=25§
Customer Service Hot Line: +86 400 8888 009 Fax: +86
510 8534 3321Add:
17-6 ChangJiang South Road, New District Wuxi, China 214028
Manufactured in China
jklm
abcdef
1000 W/m2 800 W/m2 600 W/m2 400 W/m2 200 W/m2
STP230 - 20/WdSTP225 - 20/Wd
EN-EU-STD-Wd-NO2.01-Rev 2011www.suntech-power.com©Copyright 2011 Suntech Power
High module conversion efficiency Up to 13.9%, through superior cell technology and leading manufacturing capability
Positive tolerance Guaranteed positive tolerance 0/+5% ensures power output reliability
Extended wind and snow load tests Entire module certified to withstand extreme wind (3800 Pascal) and snow loads (5400 Pascal) *
Self clean effect Anti-reflective, hydrophobic layer improves light absorption and reduces surface dust
Excellent weak light performance Excellent performance under low light environments (mornings, evenings, and cloudy days)
Suntech current sorting processAll Suntech modules sorted and packaged by amperage, maximizing system output by reducing mismatch losses by up to 2%
POLYCRYSTALLINE SOLAR MODULE230 WattFeatures
* Please refer to Suntech Standard Module Installation Manual for details.** Please refer to Suntech Product Warranty for details.
Industry-leading Warranty based on Pnom
Trust Suntech to Deliver Reliable Performance Over Time
13.9%
2%
Weak light
Certi!cations and standards: IEC 61215, IEC 61730, conformity to CE
World’s No.1 manufacturer of crystalline silicon photovoltaic modulesUnrivaled manufacturing capacity and world-class technologyRigorous quality control meeting the highest international standards : ISO 9001: 2008, ISO 14001: 2004 and ISO17025: 2005Tested for harsh environment (salt mist and ammonia corrosion testing: IEC 61701, DIN 50916: 1985 T2)
10
25
512
18
0
70%
80%
90%
100%
Year
Based on nominal power (Pnom)25-year transferrable power output warranty: 5 years/95%, 12 years/90%, 18 years/85%, 25 years/80% **Warrants 6.7% more power than the market standard over 25 years10-year material and workmanship warranty
0/+5%
3800Pa5400Pa
Self-clean
Most Modern IP67 Rated Junction BoxSupports any orientation installation. High performance low resistance connectors ensure maximum module power output for highest energy production.
Superior Frame DesignSpecially designed drainage holes and rigid construction prevent frames from deforming. Screwless frame design for a long term durability.
STP230 - 20/WdSTP225 - 20/Wd
EN-EU-STD-Wd-NO2.01-Rev 2011www.suntech-power.com | E-mail: [email protected]
Current-Voltage & Power-Voltage Curve (225-20)
Specifications are subject to change without further notification
Electrical CharacteristicsSTC STP230-20/Wd STP225-20/Wd
Optimum Operating Voltage (Vmp) 29.8 V 29.6 V
Optimum Operating Current (Imp) 7.72 A 7.61 A
Open Circuit Voltage (Voc) 36.8 V 36.7 V
Short Circuit Current (Isc) 8.25 A 8.15 A
Maximum Power at STC (Pmax) 230 W 225 W
Module E!ciency 13.9% 13.6%
Operating Module Temperature -40 °C to +85 °C
Maximum System Voltage 1000 V DC (IEC) / 600 V DC (UL)
Maximum Series Fuse Rating 20 A
Power Tolerance 0 /+5 %
STC: lrradiance 1000 W/m2, module temperature 25 °C, AM=1.5Best in Class AAA solar simulator (IEC 60904-9) used, power measurement uncertainty is within +/- 3%
Temperature CharacteristicsNominal Operating Cell Temperature (NOCT) 45±2°C
Temperature Coe!cient of Pmax -0.44 %/°C
Temperature Coe!cient of Voc -0.33 %/°C
Temperature Coe!cient of Isc 0.055 %/°C
1000 W/m2 800 W/m2 600 W/m2 400 W/m2 200 W/m2
Note: mm [inch]
!"#$%&'()
#%*+$+"'+)
**+$%"'*)
#,,+$,+',)
#"-!$('++-('%+)
./012034567849
:/7;2<567849=5>80?49
@7;2A1235987A9*5 >80?49
!!#$%!'()
BC/72A5D14EF
BG0?H5D14EF
I;2?A1725J7K
#((($%!'")
L/7<;?A580J48
M4?A17255NON##5$('")
+(5$='()
%+5$#'")
=5$('#)
AA
NOCT STP230-20/Wd STP225-20/Wd
Maximum Power at NOCT (Pmax) 168 W 165 W
Optimum Operating Voltage (Vmp) 27.1 V 26.9 V
Optimum Operating Current (Imp) 6.20 A 6.12 A
Open Circuit Voltage (Voc) 33.9 V 33.8 V
Short Circuit Current (Isc) 6.68 A 6.65 A
NOCT: Irradiance 800 W/m2, ambient temperature 20 °C, AM=1.5, wind speed 1 m/sBest in Class AAA solar simulator (IEC 60904-9) used, power measurement uncertainty is within +/- 3%
Mechanical CharacteristicsSolar Cell Polycrystalline 156 " 156 mm (6 inches)
No. of Cells 60 (6 " 10)
Dimensions 1665 " 991 " 50mm (65.6 " 39.0 " 2.0 inches)
Weight 19.8 kgs (43.7 lbs.)
Front Glass 3.2 mm (0.13 inches) tempered glass
Frame Anodized aluminium alloy
Junction Box IP67 rated
Output Cables
TUV (2Pfg1169:2007), UL 4703, UL 44
4.0 mm2 (0.006 inches2), symmetrical lengths (-) 1000 mm (39.4 inches) and (+) 1000 mm (39.4 inches)
Connectors RADOX® SOLAR integrated twist locking connectors
Packing Con!gurationContainer 20’ GP 40’ HC
Pieces per pallet 21 21
Pallets per container 6 28
Pieces per container 126 588
Dealer information
Exellent performance under weak light conditions: at an irradiation intensity of 200 W/m2 (AM 1.5, 25 °C), 95.5% or higher of the STC e!ciency (1000 W/m2 ) is achieved
Pow
er (W
)
9
8
7
6
5
4
3
2
1
0
250
200
150
100
50
0
Curr
ent (
A)
Voltage (V)
0 5 10 15 20 25 30 35 40
STP280 - 24/VdSTP275 - 24/Vd
www.suntech-power.com©Copyright 2010 Suntech Power EN-STD-Vd-NO1.01-Rev 2010
High module conversion efficiency (up to 14.4%), through superior manufacturing technology
Guaranteed 0-5W positive power output tolerance ensures high reliability
Anti-reflective, hydrophobic coating improves light absorption and reduces surface dust
Excellent performance under low light environments (mornings, evenings and cloudy days)
Entire module certified to withstand high wind loads (2400 Pascal) and snow loads (5400 Pascal) *
4.0mm thick tempered glass improves module durability
POLYCRYSTALLINE SOLAR MODULE280 Watt
0-5W
Self-clean
2400Pa 5400Pa
Features
Weak light
14.4%
4.0 mm
* Please refer to Suntech Standard Module Installation Manual for details.** Please refer to Suntech Product Warranty for details.
World’s leading manufacturer of crystalline silicon photovoltaic modulesUnrivaled manufacturing capacity and world-class technologyRigorous quality control meeting the highest international standards : ISO 9001: 2008 and ISO 14001: 2004Certi!cation and standards: IEC 61215, IEC 61730, UL 1703, conformity to CE
Suntech’s reputation is founded on more than 1.5 gigawatts of high-performing solar modules installed around the world
Industry-leading warranty
Trust Suntech to Deliver Reliable Performance Over Time
25 year transferrable power output warranty: 5 year/95%, 12 year/90%, 18 year/85%, 25 year/80% **Based on nominal powerWarrants 6.7% more power than the market standard over 25 years5 year material and workmanship warranty
Latest IP67 rated junction box improves module performance stability with enhanced thermal isolation.
STP280 - 24/VdSTP275 - 24/Vd
EN-STD-Vd-NO1.01-Rev 2010www.suntech-power.com | E-mail: [email protected]
Current-Voltage & Power-Voltage Curve (280-24)
Specifications are subject to change without further notification
Electrical CharacteristicsSTC STP280-24/Vd STP275-24/Vd
Optimum Operating Voltage (Vmp) 35.2 V 35.1 V
Optimum Operating Current (Imp) 7.95 A 7.84 A
Open - Circuit Voltage (Voc) 44.8 V 44.7 V
Short - Circuit Current (Isc) 8.33 A 8.26 A
Maximum Power at STC (Pmax) 280 Wp 275 Wp
Module E!ciency 14.4% 14.2%
Operating Temperature -40 °C to +85 °C -40°C to +85°C
Maximum System Voltage 1000 V DC 1000 V DC
Maximum Series Fuse Rating 20 A 20 A
Power Tolerance 0/+5 W 0/+5 W
STC: lrradiance 1000 W/m2, module temperature 25 °C, AM=1.5
NOCT STP280-24/Vd STP275-24/Vd
Maximum Power (W) 204 W 201 W
Maximum Power Voltage (V) 32.0 V 31.9 V
Maximum Power Current (A) 6.39 A 6.29 A
Open Circuit Voltage (Voc) 40.8 V 40.7 V
Short Circuit Current (Isc) 6.74 A 6.68 A
E!ciency Reduction(from 1000 W/m2 to 200 W/m2) <4.5% <4.5%
NOCT: Irradiance 800 W/m2, ambient temperature 20 °C, wind speed 1 m/s
Mechanical CharacteristicsSolar Cell Polycrystalline 156 " 156 mm (6 inches)
No. of Cells 72 (6 " 12)
Dimensions 1956 " 992 " 50 mm (77.0 " 39.1 " 2.0 inches)
Weight 27 kgs (59.5 lbs.)
Front Glass 4.0 mm (0.16 inches) tempered glass
Frame Anodized aluminium alloy
Junction Box IP67 rated
Output Cables
H+S RADOX® SMART cable 4.0 mm2 (0.006 inches2),symmetrical lengths (-) 1100 mm (43.3 inches) and (+) 1100 mm (43.3 inches), RADOX® SOLAR integrated twist locking connectors
Packing Con!gurationContainer 20’ GP 40’ GP 40’ HC
Pieces per pallet 21 21 21
Pallets per container 6 12 24
Pieces per container 126 252 504
Dealer information box
Temperature CharacteristicsNominal Operating Cell Temperature (NOCT) 45±2°C
Temperature Coe!cient of Pmax -0.47 %/°C
Temperature Coe!cient of Voc -0.34 %/°C
Temperature Coe!cient of Isc 0.045 %/°C
Note: mm [inch]
9
8
7
6
5
4
3
2
1
0
300
250
200
150
100
50
0
Curr
ent (
A)
Pow
er (W
)
Voltage (V)0 10 20 30 40
Junction box
(Back View)
942[37.1]
1676[66]
1176[46.3]
1956[77]
2-Ø5.1[Ø0.2]
14×9[0.55×0.35]
Drainage holes
Section A-A
A A
Ground holes2 places
Mounting slots 8 places
11
50
35
2
992[39.1]
(Front View)
Hazardous electricity can
shock, burn or cause death.
Do not touch terminals.
Model NumberRated Maximum PowerOutput ToleranceCurrent at PmaxVoltage at Pmax
Maximum Series Fuse RatingCell TechnologyApplication Class A
(Pmax
)
(Imp
)(Vmp
)(Isc )
All technical data at standard test conditionAM=1.5 E=1000W/m2
Tc=25§
Customer Service Hot Line: +86 400 8888 009 Fax: +86
510 8534 3321Add:
17-6 ChangJiang South Road, New District Wuxi, China 214028
Manufactured in China
jklm
abcdef
1000 W/m2 800 W/m2 600 W/m2 400 W/m2 200 W/m2