2021 Tool Holders and Accessories for Star CNC Machines · 2021. 2. 13. · 5 5 Collets & Guide...

The Swiss Tooling Experts

2021

Tool Holders and Accessories for Star CNC Machines

33Collets and guide bushings

A

B

C

D

E

F

G

H

I

Collets & Guide Bushings 4

ER Collets 8

Collet Holders 17

Boring Bar Holders 31

Backworking System - Height Adjustable 38

Backworking Insert Holders 55

90° Static Holders 69

Driven Fixtures 74

Accessories 95

Page

55Collets & Guide Bushings

A

Guide Bushings

Part # E-Number Ø d Ø D Thread L K Diamter up / to

TD10 I 353 16 20.5 M 14 x 1 59 16° 1.0 - 12.0SNC15 T 221 21 24 M 18 x 1 57.5 12° 3.0 - 15.0TD20R I 354 22 29 M 19 x 1 68 16° 2.0 - 16.0

TSG 20 R TSG 20 R 23 28 M 22 x 1 72 16° 3.0 - 16.0TD25S T 223 28 34 M 25 x 1 82 16° 3.0 - 21.0TD32S T 229 42 49 M 40 x 1 82 16° 3.0 - 32.0STM38 T 248 48 54 M 46 x 1 82 16° 2.0 - 38.0

Guide Bushings - Raco-Morph Coated

Advantages:

- Reduced sliding friction- Better protection agains abrasion- Very high corrosion-resistance


A

Guide Bushings with Extended Carbide Inserts

Advantages• The escape of material from the carbide guide is

prevented.• Shorter processing times are possible of the

material is possible during the turning operation.• Ideal for cutting long threads.

Guide Bushing Standard Landing Option 1 Option 2 Longer or Special Size

SNC15 14-20mm 24-28mm up to 40mm on requestTD20R 14-20mm 24-28mm up to 40mm on requestTD25S 14-20mm 24-28mm up to 40mm on requestTD32S 14-20mm 24-28mm up to 40mm on request

TD7 14-16mm on request on request on requestTD10 14-16mm on request on request on request

STM38 14-20mm 24-28mm up to 40mm on request

Longer Extended Landing on Request, Please Specify when Ordering

Part # E-Number Ø d Ø D Thread L K Diamter up / to

TD10 I 353 16 20.5 M 14 x 1 59 16º 12.0SNC15 T 221 21 24 M 18 x 1 57.5 12º 15.0TD20R F 391 22 29 M 22 x 1 68 16º 18.0TD25S T 223 28 34 M 25 x 1 82 16º 21.0TD25 I 357 28 38 M 25 x 1 81 30º 21.0

STM38 T 248 48 54 M 40 x 1 82 16º 38.0

Gold Wave Bushing with Advanced Alloy Material

Advantages:

• Wave slots prevent chips getting into the guide bore• Extended landings to 40mm standard• Ultra precision standard• Scratch free properties• Not sensative to heat and non-abrasive• Very low friction coefficient• Concentricity accuracy is the same as carbide

Standard

Extended


A

A

B

Straight (V)

Dead length Collets

Part # E-Number F-Type d D L K Max Ø Max Hex Max Square

TF15 120 E F15 76-580 15 21 64 32° 13.0 11.0 9.0

TF20 138 E F20 76-87 20 28 67 32° 16.0 14.0 11.0

TF25 145 E F25 76-64 25 35 77 32° 20.0 17.0 14.0

TF27 147 E F27 76-22 27 38 72.7 30° 23.0 20.0 16.0

TF37 EF37 76-740 1536 E 37 47 92 32° 32.0 27.0 22.0

TF48NFT 173 E F48 76-81 48 60 94 30° 42.0 38.0 30.0

Extended Nose Collets

Part # A (+/- 1mm) B

TF15 10 Depends on IDTF20 13 Depends on IDTF25 10 Depends on IDTF37 10 Depends on ID

Tapered Version Shown

Tapered (VS)

99ER Collets

B

ER-Collet Sets ISO 15488

Runout Accuracy 12 µm On wooden board

Type Set Range Step Part #

ER08 9 pcs. 1.0 - 5.0 0.5 ZWTER08ER11 13 pcs. 1.0 - 7.0 0.5 ZWTER11ER16 10 pcs. 1.0 - 10.0 1 ZWTER16ER20 12 pcs. 2.0 - 13.0 1 ZWTER20ER25 15 pcs. 2.0 - 16.0 1 ZWTER25ER32 18 pcs. 3.0 - 20.0 1 ZWTER32ER40 23 pcs. 4.0 - 26.0 1 ZWTER40

Available in a box by special order.

ER-Collets ISO 15488

Runout Accuracy 12 µm Collet ER / Part # Step Collet ER / Part # Step

ER08 1.0 - 5.0 0.5 ER20 1.0 - 13.0 0.5

ER11 1.0 - 7.0 0.5 ER25 1.0 - 16.0 0.5

*ESX12 1.0 - 7.0 0.5 ER32 2.0 - 20.0 0.5

ER16 1.0 - 10.0 0.5 ER40 3.0 - 26.0 1.0

* For SchaublinOversized collets are on the next page. Inch sizes are also available

For all collets: 1. Do not clamp collets over nominal size 2. If possible use total clamping length

Collet-set on wooden board

Collet-set in box

1010ER Collets

B

ER-Collets ISO 15488 Oversized

Runout Accuracy 12 µm Collet Metric Step Inch Step

ER08 1-5 0.5 N/A N/AER11 1-8 0.5 N/A N/AER16 1-12 0.5 N/A N/AER20 1-15 0.5 N/A N/AER25 1-20 0.5 N/A N/AER32 2-20, 21, 22 0.5 / 1 N/A N/AER40 3-30 1 N/A N/A

ER-Collets ISO 15488 HPHigh Precision - 5 µm Runout Accuracy


ER08HP 1-5 0.5 N/A N/AER11HP 1-7 0.5 1/16 - 1/4 1/32ER16HP 1-10 0.5 1/16 - 7/16 1/32ER20HP 1-13 0.5 1/8 - 1/2 1/32ER25HP 1-17 0.5 N/A N/AER32HP 2-20 0.5 N/A N/AER40HP 3-26 1 N/A N/A

For all collets:Do not clamp collets over nominal sizeIf possible use total clamping length

ER-Collets ISO 15488 UPUltra Precision - 2 µm Runout Accuracy


ER08UP 1-5 0.5 N/A N/AER11UP 1-7 0.5 1/16 - 1/4 1/32ER16UP 1-10 0.5 1/16 - 3/8 1/32ER20UP 1-13 0.5 1/8 - 1/2 1/16ER25UP 1-17 0.5 N/A N/AER32UP 2-20 0.5 N/A N/AER40UP 3-26 1 N/A N/A

1111ER Collets

B

Sealed ER-Collets ISO 15488

Runout Accuracy 12 µmCollet ER / Part # Step Collet ER / Part # Step

ERS11 3.0 - 7.0 0.5 ERS25 3.0 - 16.0 0.5ERS25 18.0 / 20.0

ERS16 3.0 - 9.5 0.5ERS16 10.0 - 12.0 1 ERS32 3.0 - 20.0 1

ERS20 3.0 - 15.0 0.5 ERS40 5.0 - 26.0 1

Up to 870 psiInch sizes also available

Sealed ER-Collets ISO 15488. HPHigh Precision - 5 µm Runout Accuracy

Part # Type Ø d Step

ERS16UP ER16 3.0 - 10.0 11/8'', 3/16'', 1/4'', 5/16'' and 3/8"

ERS20UP ER20 3.0 - 12 11/8'', 3/16'', 1/4'', 5/16'', 3/8", 7/16'' and 1/2''

ERS25UP ER25 3.0 - 16.0 0.51/8'', 3/16'', 1/4'', 5/16'', 3/8", 7/16''

1/2'', 9/16'' and 5/8''ERS32UP ER32 3.0 - 20.0 1

3/16'', 1/4'', 5/16'', 3/8", 7/16'' 1/2'', 9/16'', 5/8'' and 3/4''

ERS40UP ER40 6.0 - 22.0 and 25.0 2

Up to 870 psiPart # Example: ERS16UP 6.0 od. ERS16UP 1/4''


1212ER Collets

B

ER-Collets ISO 15488For Coolant Through Spread Holes

Runout Accuracy 12 µm

Inner Coolant -----------

• The coolant flow is directly next to the shank

• Only clamp the nominal diameter

for Coll

Part # Collet Ø d Step

ERS11JET ER11 3.0 - 7.0 0.5

ERS16JET ER16 3.0 - 10.0 0.5

ERS20JET ER20 3.0 - 12.0 0.5

ERS25JET ER25 3.0 - 16.0 0.5

ERS32JET ER32 3.0 - 20.0 1

ERS40JET ER40 6.0 - 25.0 1

Inch sizes also availableAlso available in type HP (runout accuracy < 5 µm)

The coolant flow stays along the tool (e.g. drill) and goes with it into the bore

The coolant splashes to the wall of the working piece and not into the bore


Advantage of our system Collets of other suppliers

1313ER Collets

B

ER-Collets ISO 15488Metallic Sealed

Runout Accuracy 8 µmUp to 1740 psi

Part # Collet Ø d Step

ERS16MD ER16 3.0 - 10.0 1.0

ERS20MD ER20 3.0 - 13.0 1.0

ERS25MD ER25 5.0 - 16.0 1.0

ERS32MD ER32 6.0 - 20.0 1.0

The tool must be inserted flush to the back of the collet!


1414ER Collets

B

Tapping Collets ISO 15488With Internal Driver Square

Part # Ø / □ERG08 2.2/1.8, 2.5/2.1, 2.8/2.1, 3.5/2.7, 4.0/3.0

ERG11 2.5/2.1, 2.8/2.1, 3.5/2.7, 4.0/3.2, 4.5/3.4, 5.0/4.0, 5.5/4.5, 6.0/5.0, 6.3/5.0

ERG16 2.5/2.1, 2.8/2.1, 3.5/2.7, 4.0/3.2, 4.5/3.55, 5.0/4.0, 5.5/4.3, 6.0/5.0, 6.3/5.0, 7.0/5.5, 7.1/5.6, 8.0/6.3, 9.0/7.1, 10.0/8.0

ERG202.8/2.25, 3.5/2.7, 4.0/3.2, 4.5/3.55, 5.0/4.0, 5.5/4.5, 6.0/4.9, 6.3/5.0,

7.0/5.5, 7.1/5.6, 8.0/6.3, 9.0/7.1, 10.0/8.0, 11.0/9.0, 11.2/9.0, 12.0/9.0

ERG252.5/2.1, 2.8/2.1, 3.5/2.7, 4.0/3.2, 4.5/3.55, 5.0/4.0, 5.5/4.3, 6.0/5.0,

6.3/5.0, 7.0/5.5, 8.0/6.3, 9.0/7.1, 10.0/8.0, 11.0/9.0, 11.2/9.0, 12.0/9.0, 12.5/10.0, 14.0/11.2, 16.0/12.5

ERG323.5/2.7, 4.0/3.2, 4.5/3.55, 5.0/4.0, 5.5/4.3, 6.0/4.9 6.3/5.0, 7.0/5.5,

7.1/5.6, 8.0/6.3, 9.0/7.1, 10.0/8.0, 11.0/9.0, 11.2/9.0, 1 2.0/9.0,12.5/10.0, 14.0/11.2 15.0/12.0, 16.0/12.5, 18.0/14.5, 20.0/16.0

ERG404.5/3.55, 6.0/4.9, 6.3/5.0, 7.0/5.5, 7.1/5.6, 8.0/6.3, 9.0/7.1, 10.0/8.0, 11.0/9.0, 11.2/9.0, 12.0/9.0, 12.5/10.0 14.0/11.2,

16.0/12.5, 18.0/14.5, 20.0/16.0 22.0/18.0,

Sealed Tapping Collets ISO 15488 With Internal Driver Square

Part # Ø / □ERGS16 (4031E) 4.0/3.2, 4.5/3.4, 5.0/4.0, 5.5/4.3, 6.0/4.9, 7.0/5.5

ERGS20 (4276E) 4.0/3.0, 4.5/3.4, 5.0/4.0, 5.5/4.3, 6.0/4.9, 7.0/5.5, 8.0/6.2, 9.0/7.0, 10.0/8.0

ERGS25 (4282E) 4.0/3.0, 4.5/3.4, 5.0/4.0, 5.5/4.3, 6.0/4.9, 7.0/5.5, 8.0/6.2, 9.0/7.0, 10.0/8.0, 11.0/8.0, 12.0/9.0

ERGS32 (4537E) 4.0/3.0, 4.5/3.4, 5.0/4.0, 5.5/4.3, 6.0/4.9, 7.0/5.5, 8.0/6.2, 9.0/7.0, 10.0/8.0, 11.0/8.0, 12.0/9.0, 14.0/11.0, 16.0/12.0

ERGS40 (4716E) 6.0/4.9, 7.0/5.5, 8.0/6.2, 9.0/7.0, 10.0/8.0, 11.0/8.0, 12.0/9.0, 14.0/11.0, 16.0/12.0, 18.0/14.5, 20.0/16.0


1515ER Collets

B

Floating Reamer Collets ISO 15488

• Floating collets replace floating holders

• Particularly used with driven tools

Part # Collet D L Floating R Size d

ERP16 ER16 17 29 1 2 / 3 / 4 / 5 / 6 / 7ERP16 ER16 17 29 1 1.5 / 2.5 / 3.2 / 3.5 / 3.55 / 4.5 / 5.5 / 5.6 / 6.2 / 6.3ERP20 ER20 21 32 1 2 / 3 / 4 / 5 / 6 / 7 / 8ERP20 ER20 21 32 1 1.5 / 2.5 / 2.8 / 3.2 / 3.5 / 3.55 / 4.5 / 5.5 / 5.6 / 6.3 / 7.1ERP25 ER25 26 35 1.2 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10ERP25 ER25 26 35 1.2 1.5 / 2.5 / 2.8 / 3.2 / 3.5 / 3.55 / 4.5 / 5.5 / 5.6 / 6.3 / 7.1ERP32 ER32 33 44 0.7 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14ERP32 ER32 33 44 0.7 2.5 / 3.2 / 3.5 / 3.55 / 4.5 / 5.5 / 5.6 / 6.3 /12.5ERP40 ER40 41 56 0.7 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16ERP40 ER40 41 56 0.7 2.5 / 3.2 / 3.5 / 3.55 / 4.5 / 5.5 / 5.6 / 6.3

1616ER Collets

B

Tapping Collets ISO15488With Length Adjustment

With Spline Drive for higher torque and exact guiding

Part # Collet D L E Size d

ETR11 * ER11 11.5 23 5.5 0.9 / 1.4 / 1.5 / 1.6 / 1.8 / 2 / 2.2 / 2.3 / 2.5 / 2.8 / 3 / 3.15 / 3.5 / 3.55 / 4 / 4.5ETR12 ESX12 11.5 21.5 5.5 0.9 / 1.4 / 1.5 / 1.6 / 1.8 / 2 / 2.2 / 2.3 / 2.5 / 2.8 / 3 / 3.15 / 3.5 / 3.55 / 4ETR16 ER16 17 27 7 1.4 / 1.6 / 1.8 / 2 / 2.2 / 2.5 / 2.8 / 3 / 3.15 / 3.5 / 3.55 / 4 / 4.5 / 5 / 5.5 / 5.6 / 6 / 6.1 / 6.3ETR20 ER20 21 31 7 2.2 / 2.5 / 2.8 / 3 / 3.15 / 3.5 / 3.55 / 4 / 4.5 / 5 / 5.5 / 5.6 / 6 / 6.2 / 6.3 / 7 / 8ETR25 ER25 26 34 8 2.5 / 2.8 / 3 / 3.15 / 3.5 / 3.55 / 4 / 4.5 / 5 / 5.5 / 5.6 / 6 / 6.2 / 6.3 / 7 / 7.1/ 8 / 8.5 / 9 / 10ETR32 ER32 33 43 10 4.5 / 5 / 5.5 / 5.6 / 6 / 6.2 / 6.3 / 7 / 7.1 / 8 / 8.5 / 9 / 10 / 10.5 / 11 / 11.2 / 12 / 12.5 / 14ETR40 ER40 41 54 13 4.5 / 5.5 / 5.6 / 6 / 6.2 / 6.3 / 7 / 8 / 8.5 / 9 / 10 / 10.5 / 11 / 11.2 / 12 / 12.5 / 14 / 15 / 16 / 17

Runout Accuracy 15µm Repeatability 10 µm*Type with hexagon guidance

1818Collet Holders

C

Technical Information

� All holders will be supplied with clamping nut (standard)

� Holders with "AK" will be supplied with sealed nut type Rego-fix

� Runout accuracyER-collet holders < 5µ

� List of abbreviations:

IK Axial inner coolant inlet

AK Radial inner coolant inlet

WD Through the flat

FL Not through the flat

T Special for Tornos Machines

OS Without inner top screw

AK0 Thread inner coolant lead in:

M12 x 1.5

AK1 G 1/8''

AK2 M8 x 1

AK3 M10 x 1

� B = Smallest Diameter

� For the largest assortment of collets see our catalog: Workpiece and Tool Clamping"

1919Collet Holders

C


� Collet holders: Overlap of nuts

� All holders AK0 can be reduced to AK1 - AK3

� IK Reductions:

Example:

Nut G LAER08M M10x0.75 4.3 - 6.1ER11M M13x0.75 5.7 - 7.5ER16M M19x1 8 - 11.5ER20M M24x1 8 - 11.5ER25M M30x1 8.5 - 12

UM/ER11 M14x0.75 4.9 - 6.6UM/ER16 M22x1.5 7 - 10.5UM/ER20 M25x1.5 8 - 11.5

UX/ER16 M22x1.5 7 - 10.5UX/ER20 M25x1.5 8 - 11.5UM/ER25 M32x1.5 8.5 - 12UM/ER32 M40x1.5 9.5 - 13UM/ER40 M50x1.5 11.5 - 15UM/ER50 M64x2.0 14 - 21

Part # GA GIRED1/4 - 1/8 G1/4'' G1/8''

RED1/4 - M10x1 G1/4'' M10 x 1RED1/4 - M8x1 G1/4'' M8 x 1RED1/8 - M8x1 G1/8'' M8 x 1

REDM12x1.5 - G1/8 M12 x 1.5 G1/8''REDM12x1.5 - M10x1 M12 x 1.5 M10 x 1REDM12x1.5 - M8x1 M12 x 1.5 M8 x 1

2020Collet Holders

C

ER-Collet Holders ER08M

Part # Collet D L1 L2 IK / B SW Nut Wrench

EM081645 ER08 16 45 9 5 - ER08M E08MEM081645WD ER08 16 45 9 5 14 ER08M E08MEM0816101IK ER08 16 101 17 M7 - ER08M E08M

IK: Inner Coolant B: With Through Bore SW: Wrench Flat

Versions:

WD: Clamping Flat

ER08M = M10 x 0.75

2121Collet Holders

C


Part # Collet D L1 L2 IK / B SW Picture Nut Wrench

EM110555 ER11 5 54 23 - 11 1* ER11M E11MEM111620 ER11 16 20 12 7 14 3* ER11M E11M

EM111620WD ER11 16 20 12 7 14 3 ER11M E11MEM111630 ER11 16 30 12 7 14 3* ER11M E11M

EM111630WD ER11 16 30 12 7 14 3 ER11M E11MEM111636IKWD ER11 16 36 12 G1/8" 14 1 / 4 ER11M E11M

EM111645 ER11 16 47 12 7 14 3* ER11M E11MEM111655 ER11 16 54 12 7 14 3* ER11M E11M

EM111655IKWD ER11 16 54 12 G1/8" 14 3 ER11M E11MEM111675IKTWD ER11 16 75 16 G1/8” 14 4 ER11M E11M

EM111680 ER11 16 80 12 7 14 3* ER11M E11MEM111680IKFL ER11 16 80 12 G1/8” 14 2 / 4 ER11M E11MEM111698IKWD ER11 16 98 13 G1/8” 14 4 ER11M E11M

EM1116100 ER11 16 100 13 - 14 1* ER11M E11MEM1116125 ER11 16 125 12 6 14 3* ER11M E11M

EM1116125FL ER11 16 125 12 6 14 2 / 3 ER11M E11MEM1116150IKTWD ER11 16 148 16 G1/8” 14 4 ER11M E11M

EM1116150 ER11 16 150 12 - 14 1* ER11M E11MEM1116150FL ER11 16 150 12 - 14 1 / 2 ER11M E11M

EM1116150FLB6 ER11 16 150 12 6 14 2 / 3 ER11M E11MEM1116160 ER11 16 160 16 7 14 3* ER11M E11MEM1116180 ER11 16 180 12 - 14 1* ER11M E11M

EM112270IKWD ER11 22 69 12 G1/8” 19 4 ER11M E11MEM112290IKOSW-D** ER11 22 90 12 G1/8” - 4 ER11M E11M

EM112290IKOS** ER11 22 90 12 G1/8” - 4* ER11M E11MEM1122120IKOSW-D ER11 22 120 12 G1/8” - 4 ER11M E11M

EM1122120WD ER11 22 120 12 7 19 3 ER11M E11M

** Without Wrench Flat

Pic. 1 (WD) Pic. 2 (FL)

Versions:

Also See Page 4 & 5

Pic. 3 (B) Pic. 4 (IK)ER11M = M13 x 0.75

2222Collet Holders

C



EM161620FL ER16 16 20 25 9 17 2 / 3 ER16M E16MEM161630 ER16 16 30 25 10 17 3* ER16M E16M


EM161635FL ER16 16 35 25 10 17 2 / 3 ER16M E16MEM161670IK ER16 16 70 25 G1/8" 17 3* ER16M E16MEM161670FL ER16 16 70 25 10 17 2 / 3 ER16M E16MEM161680IK ER16 16 80 27 G1/8" 17 4* ER16M E16MEM1616100 ER16 16 100 25 9 17 3* ER16M E16M


EM1616150FL ER16 16 150 25 - 17 1 / 3 ER16M E16MEM1616160 ER16 16 160 27 9 17 3* ER16M E16M

EM1616160FL ER16 16 160 27 9 17 2 / 3 ER16M E16MEM162238WD ER16 22 38 16 10 19 3 ER16M E16M

EM162238IKWD ER16 22 38 16 G1/4" 19 4 ER16M E16MEM162246WD # ER16 22 46 15 10.5 - 1 ER16M E16MEM162250WD ER16 22 50 16 10 19 3 ER16M E16M

EM162250IKWD ER16 22 50 16 G1/4” 19 4 ER16M E16MEM162270IK ER16 22 70 16 G1/4” 19 4* ER16M E16M

EM162270IKFL ER16 22 70 16 G1/4” 19 2 / 4 ER16M E16MEM162270IKWD ER16 22 70 16 G1/4” 19 4 ER16M E16M

EM162290IK ER16 22 90 16 G1/4" 19 2 / 4 ER16M E16MEM162290IKWD ER16 22 90 16 G1/4” 19 4 ER16M E16M

EM1622100 ER16 22 100 ER16M E16MEM1622105IKWD ER16 22 105 16 G1/8” 19 4 ER16M E16MEM1622114IKWD ER16 22 114 16 G1/8” 19 4 ER16M E16M

EM1622120FL ER16 22 120 16 10 19 2 / 3 ER16M E16MEM1622120IKFL ER16 22 120 16 G1/8” 19 2 / 4 ER16M E16M

EM1622120IK ER16 22 120 16 G1/8” 19 4* ER16M E16MEM1622140IKWD ER16 22 140 16 G1/8” 19 4 ER16M E16M

EM1622260 ER16 22 260 20 - 19 1* ER16M E16M

* Without Flat# For STAR SR-20RIV (with flange and groove for sealing, clamping flat)


Versions:

Also See Page 4 & 5

Pic. 3 (B) Pic. 4 (IK)

ER16M = M19 x 1

2323Collet Holders

C



EM201650 ER20 16 50 32 11 22 3* ER20M E20MEM201650FL ER20 16 50 32 11 22 2 / 3 ER20M E20MEM2016100 ER20 16 100 32 - 22 1* ER20M E20M

EM2016100FL ER20 16 100 32 - 22 1 / 2 ER20M E20MEM201865 ER20 18 65 27 13 22 3* ER20M E20MEM201870 ER20 18 70 28 11 22 3* ER20M E20M

EM202270IKFL ER20 22 70 25 G1/4” 22 2 / 4 ER20M E20MEM202270IKWD ER20 22 70 25 G1/4” 22 4 ER20M E20M

EM202290 ER20 22 90 25 12 22 3* ER20M E20MEM202290IKWD ER20 22 90 22 G1/4” 22 4 ER20M E20MEM203250IKWD ER20 32 50 34 G1/4” 22 4 ER20M E20MEM203255IKWD ER20 32 55 17 G1/4” 27 4 ER20M E20MEM203280IKWD ER20 32 80 17 G1/8” 27 4 ER20M E20MEM203280WD ER20 32 80 17 13 27 3 ER20M E20MEM203280IK ER20 32 80 15 G1/4” 27 4* ER20M E20M

EM2032101IKWD ER20 32 101 18 G1/4” 27 4 ER20M E20M


Part # Collet D L1 L2IK / B SW Picture Nut Wrench

EM252275FL ER25 22 75 33 14 27 2 / 3 ER25M E25MEM253250WD ER25 32 50 24 17 - 1 ER25M E25MEM253260WD ER25 32 62 16 17 27 3 ER25M E25M

EM253280IKWD ER25 32 80 16 G1/4” 27 4 ER25M E25MEM2532179 ER25 32 179 16 17 27 3* ER25M E25M

EM2532180WD ER25 32 180 16 17 27 3 ER25M E25M


Versions:

Also See Page: 4 & 5

Pic. 3 (B) Pic. 4 (IK)

ER20M = M24 x 1

ER20M = M24 x 1

2424Collet Holders

C

ER-Collet HoldersWith Inner Coolant, Side and Rear

Part # Collet D L1 L2 A AK IK Nut Wrench

EM161650AK1WD ER16 16 50 30 22 G1/8” M8x1 ERC16M E16MEM162250AK0WD ER16 22 50 30 22 M12x1.5 G1/8” ERC16M E16MEM162250AK1WD ER16 22 50 27 22 G1/8” G1/8” ERC16M E16MEM162250AK2WD ER16 22 50 30 22 M8x1 G1/8” ERC16M E16MEM162250AK3WD ER16 22 50 30 22 M10x1 G1/8” ERC16M E16MEM162270AK0WD ER16 22 70 30 22 M12x1.5 M12x1.5 ERC16M E16MEM162270AK1WD ER16 22 70 27 22 G1/8” G1/4” ERC16M E16MEM162270AK2WD ER16 22 70 30 22 M8x1 ERC16M E16MEM162270AK3WD ER16 22 70 30 22 M10x1 M12x1.5 ERC16M E16MEM162550AK0WD ER16 25 50 30 22 M12x1.5 G1/4'' ERC16M E16MEM162550AK1WD ER16 25 50 27 22 G1/8” G1/4” ERC16M E16MEM162550AK2WD ER16 25 50 27 22 M8x1 G1/4'' ERC16M E16MEM162550AK3WD ER16 25 50 30 22 M10x1 G1/4” ERC16M E16MEM202250AK0WD ER20 22 50 34 28 M12x1.5 G1/8” ERC20M E20MEM202250AK1WD ER20 22 50 34 28 G1/8” G1/8” ERC20M E20MEM202250AK2WD ER20 22 50 34 28 M8x1 G1/8” ERC20M E20MEM202250AK3WD ER20 22 50 34 28 M10x1 G1/8” ERC20M E20MEM203255AK2WD ER20 32 55 34 M8x1 ERC20M E20M

ER-Collet HoldersWith Side Coolant Inlet

Part # Collet D L1 L2 A SW AKic Nut Wrench

EM162260WDAKS1 ER 16 22 60 14 22 19 G1/8" ERC16M E16M EM162270WDAKS1 ER 16 22 70 14 22 19 G1/8" ERC16M E16M EM162280WDAKS1 ER 16 22 80 14 22 19 G1/8" ERC16M E16M

ERC16M = M19 x 1 ERC20M = M24 x 1

2525Collet Holders

C

ER-Double Holders

Part # Collet D L1 L2 A N SW Nut Wrench

ED111632WD ER11 16 32 12 16 7.5 14 ER11M E11MED111650WD ER11 16 50 12 16 7.5 14 ER11M E11MED111672WD ER11 16 72 12 16 7.5 14 ER11M E11M

ED1116100WD ER11 16 100 12 16 7.5 14 ER11M E11MED112232WD ER11 22 32 12 16 7.5 19 ER11M E11M

EDU112295WD ER11 22 95 12 16 7.5 19 UM/ER11 GS17EDU1122100WD ER11 22 100 12 16 7.5 19 UM/ER11 GS17

ED162240WD ER16 22 40 15 22 11 19 ER16M E16MED162248WD ER16 22 48 15 22 11 19 ER16M E16MED162255WD ER16 22 55 15 22 11 19 ER16M E16MED162262WD ER16 22 62 15 22 11 19 ER16M E16MED162267WD ER16 22 67 12 22 11 19 ER16M E16MED162275WD ER16 22 75 13 22 11 19 ER16M E16MED162284WD ER16 22 84 16 22 11 19 ER16M E16MED162290WD ER16 22 90 16 22 11 19 ER16M E16MED162295WD ER16 22 95 16 22 11 19 ER16M E16M

ED1622100WD ER16 22 100 16 22 11 19 ER16M E16MED1622120WD ER16 22 120 15 22 11 19 ER16M E16MED203220WD ER20 32 20 18 28 14 - ER20M E20MED203235WD ER20 32 35 18 28 14 - ER20M E20MED203243WD ER20 32 43 18 28 14 27 ER20M E20MED203243FL ER20 32 43 18 28 14 27 ER20M E20MED203248WD ER20 32 48 18 28 14 27 ER20M E20MED203255WD ER20 32 55 18 28 14 27 ER20M E20MED203285WD ER20 32 85 18 28 14 27 ER20M E20MEDU253252FL ER25 32 52 16 40 17 - UM/ER25 E25

ER-double holders can be changed to AK1-inner -coolant (G1/8'') for an extra charge

Versions

FL: Partial Clamping Flat

WD: Clamping Flat Throughout

UM/ER11 = M14 x 0.75 ER16M = M19 x 1 ER20M = M24 x 1ER11M = M13 x 0.75 UM/ER25 = M32 x 1.5

2626Collet Holders

C

ER-Double HoldersWith Inner Coolant

Part # Collet D L1 L2 L3 A N AK SW Nut Wrench

ED11/162280AK1WD ER11/16 22 80 13 16 19/22 7.5 G1/8” - ER11M/ERC16M E11M/E16MED11/162295AK0WD ER11/16 22 95 13 16 19/22 7.5 M12x1 - ER11M/ERC16M E11M/E16MED11/162295AK1WD ER11/16 22 95 13 16 19/22 7.5 G1/8” - ER11M/ERC16M E11M/E16MED11/162295AK2WD ER11/16 22 95 13 16 19/22 7.5 M8x1 - ER11M/ERC16M E11M/E16MED11/162295AK3WD ER11/16 22 95 13 16 19/22 7.5 M10x1 - ER11M/ERC16M E11M/E16M

ED162065AK1WD ER16 20 65 16 16 22 11 G1/8” ERC16M E16MED162254AK1WD ER16 22 54 16 16 22 11 G1/8” ERC16M E16MED162257AK1WD ER16 22 57 16 16 22 11 G1/8” ERC16M E16MED162267AK1WD ER16 22 67 16 16 22 11 G1/8” - ERC16M E16MED162270AK1WD ER16 22 70 16 16 22 11 G1/8” 19 ERC16M E16MED162270AK2WD ER16 22 70 16 16 22 11 M8x1 19 ERC16M E16MED162289AK1WD ER16 22 89 15 15 22 11 G1/8” ERC16M E16MED162294AK1WD ER16 22 94 15 15 22 11 G1/8” ERC16M E16M

ED1622100AK1WD ER16 22 100 16 16 22 11 G1/8” - ERC16M E16MED16/202250AK1WD ER16/20 22 50 16 18 22/28 11 G1/8” ERC16M/ERC20M E16M/E20MED16/202260AK1WD ER16/20 22 60 16 18 22/28 11 G1/8” ERC16M/ERC20M E16M/E20MED16/202265AK1WD ER16/20 22 65 16 18 22/28 11 G1/8” ERC16M/ERC20M E16M/E20MED16/202270AK1WD ER16/20 22 70 15 15 22/28 11 G1/8” 19 ERC16M/ERC20M E16M/E20M

ED203244AK2WD ER20 32 44 18 18 28 14 M8x1 ERC20M E20MED203255AK1WD ER20 32 55 18 18 28 14 G1/8” 27 ERC20M E20MED203255AK2WD ER20 32 55 18 18 28 14 M8x1 27 ERC20M E20MED203265AK1WD ER20 32 65 18 18 28 14 G1/8” - ERC20M E20MED203270AK1WD ER20 32 70 18 18 28 14 G1/8” ERC20M E20MED203285AK1WD ER20 32 85 18 18 28 14 G1/8” 27 ERC20M E20MED253255AK1WD ER25 32 55 19 19 35 18 G1/8” ERC25M E25M

All holders AK0 can be reduced to AK1 - AK3

ER11M = M13 x 0.75 ERC16M = M19 x 1 ERC20M = M24 x 1 ERC25M = M30 x 1

2727Collet Holders

C

ER-Double HoldersWith Different Collet Sizes

Part # Collets D L1 L2 L3 A1 A2 N SW Nut Wrench

ED11/161680FL ER11/16 16 80 12 21 16 22 7.5 17 ER11M/ER16M E11M/E16MEDU11/162290WD ER11/16 22 90 12 16 19 22 7.5 19 UM/ER11/ER16M GS17/E16MEDU11/162292FL ER11/16 22 92 12 16 19 22 7.5 19 UM/ER11/ER16M GS17/E16M

ED16/202265 ER16/20 22 65 23 25 22 28 11 19 ER16M/ER20M E16M/E20MED20/253250WD ER20/25 32 50 25 34 28 35 14 27 ER20M/ER25M E20M/E25MED20/253255WD ER20/25 32 55 18 18 28 35 14 27 ER20M/ER25M E20M/E25M

FL: Partial Clamping Flat

WD: Clamping Flat Throughout

Versions:

ER11M = M13 x 0.75 UM/ER11 = M14 x 0.75 ER16M = M19 x 1 ER20M = M24 x 1 ER25M = M30 x 1

2828Boring Bar Holders

D

ER-Collet HoldersFor Backworking

Picture 1 Picture 2

Picture 3 Picture 4

Picture 5 Picture 6

Picture 7 Picture 8

Picture 9


D

ER-Collet HoldersFor Backworking

Part # Collet D L1 L2 A B C AK Picture Nut Machine type

EM1116SRJK ER11 16 10 17 16 17 41 -- 1 ER11MSR-10J (Pos T21 + T23)

EM1116SRJ ER11 16 10 41 16 17 41 -- 1 ER11M

EM1116SR ER11 16 20 17 19 24 40 -- 2 ER11MSR-16 ; SR-20EM1616SRMS ER16 16 20 17 22 24 40 -- 2 ER16M

EM1616SROS* ER16 16 20 17 22 24 40 -- 2 ER16M

EM1116SRR ER11 16 10 16 16 17 41 -- 2 ER11M SR-16R

EM1122SRR ER11 22 25 47 16 28 49 -- 2 ER11M

SR-10J (Pos T22+ T24) ;SB-12 / 20R ; SB-16 / 20 ;SR-20J / JN ; SR-32J / JN ;SR-20 R / II / III ; SV-20R ;SW-12RII ; ECAS-12/20SR-20RIV (Pos T21 - T24overlaps T25 - T28)

EM1622SRR ER16 22 25 30 22 28 49 -- 2 ER16MEM1622SRR-L ER16 22 25 45 22 28 49 -- 2 ER16MEM1622SRR-AK1 ER16 22 25 31 22 28 49 G1/8” 3 ERC16MEM1622SRR-AK2 ER16 22 25 31 22 28 49 M8x1 3 ERC16MEM1622SRR-c ER16 22 25 21 22 28 49 -- 2 ER16MEM2022SRR ER20 22 25 30 28 28 49 -- 2 ER20MEM2022SRR-AK1 ER20 22 25 30 28 28 49 G1/8” 3 ERC20MEM2022SRR-AK2 ER20 22 25 30 28 28 49 M8x1 3 ERC20M

EM1622SW ER16 22 25 38 22 32,5 37,5 -- 5 ER16M

SW-20 ; SW-12RII ; SV-20R ; SR-20RIV ;SB-12 / 20R ; SR-38

EM1622SW-OS* ER16 22 25 40 22 32,5 37,5 -- 5* ER16MEM1622SW-AK1 ER16 22 25 38 22 32,5 37,5 G1/8” 6 ERC16MEM1622SW-AK2 ER16 22 25 38 22 32,5 37,5 M8x1 6 ERC16MEM1622SW2-OS* ER16 22 25 40 22 32,5 37,5 -- 7* ER16MEM2022SW ER20 22 25 32 28 32,5 37,5 -- 5 ER20MEM2022SW-AK1 ER20 22 25 32 28 32,5 37,5 G1/8” 6 ERC20MEM2022SW2-OS* ER20 22 25 27 28 32,5 37,5 -- 7* ER20MEM2022SW-AK1 ER20 22 25 32 28 32,5 37,5 G1/8” 6 ERC20M

EM1622SWS ER16 22 25 31 22 24 37,5 -- 4 ER16M SW-20 (Pos T24 + T28)

EM2022SR ER20 22 25 28 28 38 48 -- 2 ER20M SR-32 ; SR-32J

EM1622SWIK ER16 22 25 35 22 37,5 44 -- 8 ERC16MSR-38 ; SR-32JIIEM2022SWIK ER20 22 25 33 28 37,5 44 -- 8 ERC20M

EU2522SWIK ER25 22 25 33 42 49 47 -- 9 ERC25

* Without thread for backstop screw

ER11M = M13 x 0,75

ER20M = M24 x 1

ER16M = M19 x 1

ERC20M = M24 x 1

ERC16M = M19 x 1

ERC25 = M32 x 1,5

3030Collet Holders

C

Clamping Flanges for Backworking

• Ground on both sides• Exact fit to the machine

Picture 1 Picture 2 Picture 3 Picture 4

Part # Picture Machine

STAR-KB1-22SRR 1 SR-10J (Position T22 + T24); SB-16 / 20 Type C / Type E; SB-20R Type E / Type G / Type N; SR-20J / JN ; SW-12RII; SR-20 R / II / III ; SV-20R; SR-32J / JN; SR-20R IV (Pos. T21 - T24,

Overlaps T25 - T28)STAR-KB2-22SRR 2

STAR-KB1-22SW 3 SW-12R II ; SW-20; SV-20R ; SR-20RIVSB-12/20R ; S-R38STAR-KB2-22SW 4

Ma

ch

ine

Clamping Flange

ER-Collet Holder

Carbide Boring Bar

Samples of application:


D


D

Boring Bar Sleeves For Backworking

Pic. 1 Pic. 2

Part # d D C B L1 L Machines Pic.

WD0616SR 6 16 40 24 20 46

SR16 / 20

1WD0816SR 8 16 40 24 20 46 1WD1016SR 10 16 40 24 20 46 1WD1216SR 12 16 40 24 20 46 1

WD0622SRR 6 22 49 28 25 59

SR10J (Position T22 + T24)SB16 / 20 Type C / Type E

SB20R Type E / Type G / Type N SR20J / JN ; SW12RII

SR20 R / II / III ; SV20RSR32J / JN

SR20R IV (Pos. T21 - T24,overlaps T25 - T28)

2WD0722SRR 7 22 49 28 25 59 2WD0822SRR 8 22 49 28 25 59 2WD0922SRR 9 22 49 28 25 59 2WD1022SRR 10 22 49 28 25 59 2WD1222SRR 12 22 49 28 25 59 2WD1422SRR 14 22 49 28 25 59 2WD1622SRR 16 22 49 28 25 59 2WD1922SRR 3/4" 22 49 28 25 59 2WD2022SRR 20 22 49 28 25 59 2

WD0622SR 6 22 48 38 25 63

SR32

1WD0822SR 8 22 48 38 25 63 1WD1022SR 10 22 48 38 25 63 1WD1222SR 12 22 48 38 25 63 1WD1422SR 14 22 48 38 25 63 1WD1622SR 16 22 48 38 25 63 1WD2022SR 20 22 48 38 25 63 1


D

Boring Bar SleevesFor Backworking with Inner Coolant Inlet

Part # d D L1 L2 C B AK Machines Pic.

WD2522SR-AK1 25 22 25 44 48 38 G1/8" SR32 --

WD0322SRR-AK1 3 22 25 42 49 28 G1/8"

SR10J (Position T22 + T24)SB16 / 20 Type C / Type E

SB20R Type E / Type G / Type N SR20J / JN ; SW12RII

SR20 R / II / III ; SV20RSR32J / JN ; ECAS12/20

SR20R IV (Pos. T21 - T24,verbaut - overlaps T25 - T28)

3WD0422SRR-AK1 4 22 25 42 49 28 G1/8" 3WD0522SRR-AK1 5 22 25 42 49 28 G1/8" 3WD0622SRR-AK1 6 22 25 42 49 28 G1/8" 3WD0722SRR-AK1 7 22 25 42 49 28 G1/8" 3WD0822SRR-AK1 8 22 25 42 49 28 G1/8" 3WD1022SRR-AK1 10 22 25 42 49 28 G1/8" 3WD1222SRR-AK1 12 22 25 42 49 28 G1/8" 3WD1422SRR-AK1 14 22 25 42 49 28 G1/8" 3WD1622SRR-AK1 16 22 25 42 49 28 G1/8" 3WD2022SRR-AK1 20 22 25 42 49 42 28 G1/8" 3

WD3122SRR-AK1 1/8'' 22 25 42 49 28 G1/8" 3WD4722SRR-AK1 3/16'' 22 25 42 49 28 G1/8" 3WD6322SRR-AK1 1/4'' 22 25 42 49 28 G1/8" 3WD7922SRR-AK1 5/16'' 22 25 42 49 28 G1/8" 3WD9522SRR-AK1 3/8'' 22 25 42 49 28 G1/8" 3WD1322SRR-AK1 1/2'' 22 25 42 49 28 G1/8" 3WD5822SRR-AK1 5/8'' 22 25 42 49 28 G1/8" 3WD1922SRR-AK1 3/4'' 22 25 42 49 28 G1/8" 3

Pic. 3

With Coolant Port


D

Part # d D L1 L2 C B AK Machines Pic.

WD0322SW-AK1 3 22 25 42 37.5 32.5 G1/8"

SW12R II ; SW20SV20R ; SR20R IVSB12/20R ; SR38

4WD0422SW-AK1 4 22 25 42 37.5 32.5 G1/8" 4WD0522SW-AK1 5 22 25 42 37.5 32.5 G1/8" 4WD0622SW-AK1 6 22 25 42 37.5 32.5 G1/8" 4WD0822SW-AK1 8 22 25 42 37.5 32.5 G1/8" 4bWD1022SW-AK1 10 22 25 42 37.5 32.5 G1/8" 4WD1222SW-AK1 12 22 25 42 37.5 32.5 G1/8" 4bWD1422SW-AK1 14 22 25 42 37.5 32.5 G1/8" 4WD1622SW-AK1 16 22 25 42 37.5 32.5 G1/8" 4WD2022SW-AK1 20 22 25 42 37.5 32.5 G1/8" 4

WD3122SW-AK1 1/8'' 22 25 40 37.5 32.5 G1/8" 4WD4722SW-AK1 3/16'' 22 25 40 37.5 32.5 G1/8" 4WD6322SW-AK1 1/4'' 22 25 40 37.5 32.5 G1/8" 4WD7922SW-AK1 5/16'' 22 25 40 37.5 32.5 G1/8" 4WD9522SW-AK1 3/8'' 22 25 40 37.5 32.5 G1/8" 4WD1322SW-AK1 1/2'' 22 25 40 37.5 32.5 G1/8" 4WD5822SW-AK1 5/8'' 22 25 40 37.5 32.5 G1/8" 4WD1922SW-AK1 3/4'' 22 25 40 37.5 32.5 G1/8" 4

WD0422SWIK 4 22 25 40 44.2 37 Ø 6

SR38SR32J-II

5WD0622SWIK 6 22 25 40 44.2 37 Ø 6 5WD0822SWIK 8 22 25 40 44.2 37 Ø 6 5WD1022SWIK 10 22 25 40 44.2 37 Ø 6 5WD1222SWIK 12 22 25 40 44.2 37 Ø 6 5WD1622SWIK 16 22 25 40 44.2 37 Ø 6 5WD2022SWIK 20 22 25 40 44.2 37 Ø 6 5

Pic. 5Pic. 4 Pic. 4b

Boring Bar SleevesFor Backworking with Inner Coolant Inlet


D

Boring Bar Sleeves

Boring bar will be accurately horizontally adjusted

Number of clamping flats and thread holes may vary from the shown drawings

Part # d D C B L1 L IK Machines Picture

WD061650 6 16 18 -- 50 70 6STAR

SR-10JSW--7

2WD081650 8 16 18 -- 50 70 8 2WD101650 10 16 20 -- 50 70 9 2WD121650 12 16 22 -- 50 70 9 2ABS691-03 3 16 15.8 -- 80 90 G1/8"

STAR SR-10J

SW-12R II

1ABS691-41 4 16 15.8 -- 80 90 4 1ABS691-05 5 16 15.8 -- 80 90 G1/8" 1ABS691-42 6 16 15.8 -- 80 90 6 1ABS691-08 8 16 15.8 -- 80 90 G1/8" 1

Pic. 1

Pic. 3

Pic. 2

3636Reduction Sleeves Reduction Sleeves

Boring Bar Sleeves

Reduction Sleeves with Inner Coolant Inlet Axial and Radial

Reduction Sleeve inserted from back

Coolant inlet Axial (IK)

Coolant inlet Radial (AK)

* With clamping flat and 2 or 3 clamping screws

Part # D d L LBAK / IK B

RBIK1906 * 3/4” 6 65 14 2x G1/8" 24 *RBIK1908 3/4” 8 65 14 2x G1/8" 24RBIK1910 3/4” 10 65 14 2x G1/8" 24RBIK1912 3/4” 12 65 14 2x G1/8" 24RBIK1914 3/4” 14 65 14 2x G1/8" 24RBIK1916 3/4” 16 65 14 2x G1/8" 24RBIK2008 20 8 65 14 2x G1/8" 26RBIK2010 20 10 65 14 2x G1/8" 26RBIK2012 20 12 65 14 2x G1/8" 26RBIK2016 20 16 65 14 2x G1/8" 26RBIK2206 * 22 6 65 14 2x G1/8” 26 *RBIK2208 22 8 65 14 2x G1/8" 26RBIK2210 22 10 65 14 2x G1/8" 26RBIK2212 22 12 65 14 2x G1/8" 26RBIK2213 22 1/2'' 65 14 2x G1/8'' 26RBIK2214 22 14 65 14 2x G1/8" 26RBIK2216 22 16 65 14 2x G1/8" 26RBIK2218 22 18 65 14 2x G1/8" 26RBIK2508 25 8 70 19 2x G1/4" 29.5RBIK2510 25 10 70 19 2x G1/4" 29.5RBIK2512 25 12 70 19 2x G1/4" 29.5RBIK2514 25 14 70 19 2x G1/4" 29.5RBIK2516 25 16 70 19 2x G1/4" 29.5RBIK2608 1'' 8 70 19 2x G1/4" 29.5RBIK2610 1'' 10 70 19 2x G1/4" 29.5RBIK2612 1'' 12 70 19 2x G1/4" 29.5RBIK2614 1'' 14 70 19 2x G1/4" 29.5RBIK2616 1'' 16 70 19 2x G1/4" 29.5

RBIK3206K 32 6 55 3 G1/8” 40RBIK3208K 32 8 55 3 G1/8” 40RBIK3210K 32 10 55 3 G1/8” 40RBIK3212K 32 12 55 3 G1/8” 40RBIK3214K 32 14 55 3 G1/8” 40RBIK3216K 32 16 55 3 G1/8” 40RBIK3218K 32 18 55 3 G1/8” 40RBIK3220K 32 20 55 3 G1/8” 40

→


D

Boring Bar Sleeves

Part # d D C B L1 L IK Machines Picture

ABS736-44IK 6 22 24 -- 70 105 G1/4"

STARRNC-16B SR-16/20/32

KNC SNCSV-12/20/32

SA-12/16 SE-12/16ECAS--12 / 20 , SB--12 / 20R

SB--16C / D / ESR-20J / JN , SR-20 R / II / III / IV

SR-32J / JN , SR-38A / BST-20 , ECAS--20TSV-20R , SW--20

ST-38 , SV-32J , SV-38R

2ABS736-40IK 8 22 24 -- 70 105 G1/4" 2ABS736-41IK 10 22 24 -- 80 105 G1/4" 2ABS736-42IK 12 22 24 -- 80 105 G1/4" 2

WD032280IK 3 22 21.7 -- 80 112 G1/4" 1WD042280IK 4 22 21.7 -- 80 112 G1/4" 1WD052280IK 5 22 21.7 -- 80 112 G1/4" 1WD062280IK 6 22 21.7 -- 80 112 G1/4" 1WD072280IK 7 22 21.7 -- 80 112 G1/4" 1WD082280IK 8 22 21.7 -- 80 112 G1/4" 1WD102280IK 10 22 21.7 -- 80 112 G1/4" 1WD122280IK 12 22 24 -- 80 112 G1/4" 2WD142280IK 14 22 29 24 80 112 G1/4" 3WD162280IK 16 22 29 24 80 112 G1/4" 3WD192280IK 19 22 32 24 80 112 G1/4" 3WD202280IK 20 22 32 24 80 112 G1/4" 3WD312280IK 1/8'' 22 21.7 -- 80 112 G1/4" 1WD472280IK 3/16'' 22 21.7 -- 80 112 G1/4" 1WD632280IK 1/4" 22 21.7 -- 80 112 G1/4" 1WD792280IK 5/16" 22 21.7 -- 80 112 G1/4" 1WD952280IK 3/8" 22 21.7 -- 80 112 G1/4" 1WD132280IK 1/2" 22 24 -- 80 112 G1/4" 2WD582280IK 5/8" 22 29 24 80 112 G1/4" 3ABS301-41 6 22 21.7 -- 80 128.5 12.4 1ABS301-42 8 22 21.7 -- 80 128.5 12.4 1

ABS301-43IK 10 22 21.7 -- 80 120 G1/4" 1ABS301-44IK 12 22 21.7 -- 80 120 G1/4" 1

WD203275IK 20 32 31.8 -- 75 106 G1/4"STAR SR-32JN

1WD253280IK 25 32 40 34 80 106 G1/4" 3WD0632105 6 32 31.6 -- 95 105 G1/4"

STAR SR-32J

1WD0832105 8 32 31.6 -- 95 105 G1/4" 1WD1032105 10 32 31.6 -- 95 105 G1/4" 1WD1232105 12 32 31.6 -- 95 105 G1/4" 1WD1432105 14 32 31.6 -- 95 105 G1/4" 1WD1632105 16 32 31.6 -- 95 105 G1/4" 1WD2032105 20 32 31.6 -- 94 105 G1/4" 1

WD3132105IK 1/8'' 32 31.6 -- 75 105 G1/4" 1WD6332105IK 1/4'' 32 31.6 -- 95 105 G1/4" 1WD7932105IK 5/16'' 32 31.6 -- 95 105 G1/4" 1WD9532105IK 3/8'' 32 31.6 -- 95 105 G1/4" 1WD5832105IK 5/8'' 32 31.6 -- 91 105 G1/4" 1WD1932105IK 3/4'' 32 31.6 -- 95 105 G1/4" 1

3939Backworking System Height Adjustable

E


Smallest turning diameters are possible as a result of the height adjustment option.

Exact Height Adjustment

+/- 0.4 mm with scale. step = 0.1 mm

System Design

Holders on shanks with deeper slots for the screws can be disassembled without unscrewing the shank.


E

Assembling

Shank + standard holder

Shank Standard Holder

Shank + Specer Plate + Standard Holder

HV-ZYL..-IK

Shank

HV-EXC-IK

Standard Holder

Length of bolt is dictated by size of the spacer plate HV-ZYL..-IK (HVD20S <===> HV-ZYL20-IK)

Shank + Specer Plate + Holder without eccentric bolt

HV-ZYL..-IK

Shank

HV-IK-PIN

E.g. HV-ER16

There is no difference assembling a shank or spacer plate with or without coolant

HV-EXC-IK

Specer Plate HVD..S..

Specer Plate HVD..S..


E

Shanks

Pic. 1 Pic. 2 Pic. 3 Pic. 4 Pic. 5 Pic. 6 * / **

Pic. 7 Pic. 8

Part # D L1 L2Pic. AK Machine

HVD1620SR-WD 16 20 1 -- STAR SR-16, SST16HVD2225SR-WD 22 25 2 -- STAR SR-32HVD2225SR-R 22 25 3 --

*HVD2225SR-RWD 22 25 3 --HVD2225SR-R-AK2 22 25 4 M8x1HVD2225SW-1-AK1 22 25 5 G1/8'' STAR SB-12 / 20R, SR-20R IV,

SV-20R, SR-38 Type A / B, SW-12R II, SW-20

HVD2225SW-2-AK2 22 25 6 M8x1

HVD3045 30 45 7 --

STAR SV-38R, ECAS-32MAIER

HVD3419 34 19.5 10 7 --HVD3419-AK1 34 19.5 19 7 G1/8"

HVD3444 34 44 10 7 --HVD3444-AK1 34 44 19 7 G1/8"HVD3439SV-38 34 39 8

STAR SV-38-RHVD3439SV-38-AK1 34 39 8 G1/8"

WD = With Flat

* For STAR-Machine: SR-10J (Position T22 / T24), SB-12 / 16 / 20 Type C / Type E, SB-20 R Type E / Type G / Type N,SR-20J / JN, SR-20 R / II / III, SR-32J / JN, ECAS-12 / 20SR-20R IV (T21 - T24. overlaps - T25 - T28)

# Holder can be screwed or unscrewed without removing the head, see technical information at the beginning of the chapter.

** Not height adjustable - 4mm out of centerHeight adjustable holder overlaps position below on the SR-20RIV, SW-20 and SB-20R. This holder is out of center in upper direction to prevent this problem. Height adjustment only by Y-axis.


E

Spacer Plates

Pic. 1 Pic. 2

Part # D Picture

HVD10S 10 1HVD15S 15 1HVD20S 20 1HVD25S 25 1HVD30S 30 1

With Inner Coolant

HVD15S-AK1 15 2HVD20S-AK1 20 2HVD25S-AK1 25 2HVD30S-AK1 30 2

Supplied with screws and cylindrical bolt

Bolts / Eccentric Bolts

Pic. 1 Pic. 2 Pic. 3

Part # L Picture

HV-EXC-IK 16.5 1HV-IK-PIN 20 2

HV-ZYL10-IK 9.4 3HV-ZYL15-IK 14.4 3HV-ZYL20-IK 19.4 3HV-ZYL25-IK 24.4 3HV-ZYL30-IK 29.4 3


E

Specer Plates

Pic. 1 Pic. 2

Part # Picture

HVD-XS2 1HVD-X2 2

Samples of Applications

Overview of Holders for Insert Types

PageBIMU-040 / BIMU-400 X 42Threading Inserts - ER16-0 / 15 / 3 43TC . . 21.5 / 22 43CC . . 21.5 / 32.5) 44DC . . 1.81.5 / 21.5 44, 45VB / VC / VP . . 21.5 / 22 45 - 47MICRO TURN Cutting Inserts 49PICCO Cutting Inserts 49HORN Cutting Inserts 50APPLITEC TOP 73 / 74 X , TOP 75 / 76 X 51APPLITEC ECO 25 / 26 X 51APPLITEC 33 / 34 X 51

Application possible for right and left

HVD-X2HVD-XS2


E

For BIMU-040 Inserts

Left Version Right VersionPart # Type Inserts L

HV-BI040R Right BIMU-040 23HV-BI040L Left BIMU-040 23

For BIMU-400 X Inserts

Left Version

Part # Type Inserts L

HV-BIX-R Right BIMU-400 X 25.6HV-BIX-L Left BIMU-400 X 25.6

HVL-BIX-R Right BIMU-400 X 42.6HVL-BIX-L Left BIMU-400 X 42.6

BIMU-400 X Inserts


E

For Threading Inserts ER16

Pic. 1 Pic. 2 (Right Version) (Right Version Outside)

Inserts ER16 ISO

Part # Type Angle L Picture

HV-ER16-0 Right 0° 31 1HV-ER16-15 Right 1.5° 31 1HV-ER16-3 Right 3° 31 1

HVL-ER16-0 Right 0° 40 1HVL-ER16-15 Right 1.5° 40 1HVL-ER16-3 Right 3° 40 1HVA-ER16-0 Right 0° 31 2HVA-ER16-15 Right 1.5° 31 2HVA-ER16-3 Right 3° 31 2

HVLA-ER16-15 Right 1.5° 40 2HVL-EL16-15

for left hand thread Left 1.5° 40 --

Type STJC


HVL-STJCR1102 Right TC..1102 40HVL-STJCL1102 Left TC..1102 40HVL-STJCR1103 Right TC..1103 40HVL-STJCL1103 Left TC..1103 40

Right Version

Pitch angle evaluation:

pitch angle = 20 x pitch of thread diameter of thread

Most common is 1.5°


E

Type SCLC

SCLCL06 SCLCL09 (Left Version) (Left Version)

Part # Type Inserts LHV-SCLCR06 Right CC..21.5.. 23HV-SCLCL06 Left CC..21.5.. 23HV-SCLCR09 Right CC..32.5.. 23HV-SCLCL09 Left CC..32.5.. 23

Type SDNC

SDNCN11 SDNCR11 (Right Version)

Part # Type Inserts LHV-SDNCN11 centered DC..32.5.. 23HV-SDNCR11 Right DC..32.5.. 23

HVL-SDNCR11 Right DC..32.5.. 40HVL-SDNCL11 Left DC..32.5.. 40


E

Type SDJC

SDJCL07 SDJCL11 (Left Version) (Left Version)

Part # Type Inserts LHV-SDJCR06 Right DC..1.81.5.. 23HV-SDJCR07 Right DC..21.5.. 23HV-SDJCL07 Left DC..21.5.. 23

HVL-SDJCR07 Right DC..21.5.. 40HVL-SDJCL07 Left DC..21.5.. 40HV-SDJCR11 Right DC..32.5.. 23HV-SDJCL11 Left DC..32.5.. 23

HVL-SDJCR11 Right DC..32.5.. 40HVL-SDJCL11 Left DC..32.5.. 40HVA-SDJCR11 Right DC..32.5.. 23HVA-SDJCL11 Left DC..32.5.. 23

Type SVNC

SVNCR11 HVA-SVNCR11 (Right Version) (Right Version Outside)

Part # Type Inserts LHVL-SVNCR11 Right VC..22.. 40HVL-SVNCL11 Left VC..22.. 40HVA-SVNCR11 Right VC..22.. 23HVA-SVNCL11 Left VC..22.. 23

HVA-SDJCR11 (Right Version)


E

Type SVVC, SVUC

SVVCN11 SVUCR11 (Right Version)

Part # Type Inserts LHV-SVVCN11 Centered VC..22.. 31HV-SVUCR11 Right VC..22.. 23HV-SVUCL11 Left VC..22.. 23

Type SVQC

Left Version


HV-SVQCR11 Right VC..22.. 23HV-SVQCL11 Left VC..22.. 23HVL-SVQCR11 Right VC..22.. 40HVL-SVQCL11 Left VC..22.. 40


E

Type SVJB, SVJC, SVJP and SVZC

SVJCL11 SVZCR11(Left Version) (Right Version)

Part # Picture Type Inserts L

HV-SVJBR11 1 Right VB..22.. 23HV-SVJBL11 1 Left VB..22.. 23

HVM-SVJBR1102 1 Right VB..21.5 31HV-SVJCR11 1 Right VC..22.. 23HV-SVJCL11 1 Left VC..22.. 23

HVM-SVJBR11 1 Right VC..22.. 31HVM-SVJBL11 1 Left VC..22.. 31HVL-SVJBR11 1 Right VC..22.. 40HVL-SVJBL11 1 Left VC..22.. 40HVL-SVJCR11 1 Right VC..22.. 40HVL-SVJCL11 1 Left VC..22.. 40HVL-SVJPR10 1 Right VP..10 40HVL-SVZCR11 2 Right VC..22.. 40

Spare Parts

Insert Type Wrench / Part # Screw / Part #

CC..21.5.. T8 A02-25060CC..32.5.. T15 A02-40105DC..21.5.. T8 A02-25060DC..32.5.. T15 A02-40105VC..22.. T8 A02-25060TC..22.. T8 A02-25060

BIMU-040 T8 A02-25060BIMU-400 X T9 A02-W3082

Inserts ER16 T9 A02-30100

Pic. 1 Pic. 2


E

Mounting for Insert Tool Holders, 10 x 10 and 12 x 12

Pic. 1 R + L + and Overhead Pic. 2: R + L + and Overhead

Part # For Shank Picture

HV-1010 10 x 10 1HV-1212 12 x 12 2

Collet Holders ER 11 & ER16

Pic. 1 Pic. 2Part # Type / Range Picture

HV-ER11 ER11 / 0.5-7mm 1HV-ER16 ER16 / 1-10mm 2


E

MICRO TURN- Holder System Ifanger

Part # For Shank

HV-IF4 Ifanger 4mmHV-IF6 Ifanger 6mm

For ISCAR PICCO CUT Inserts

Holder - Picture 1

Part #

HV-PIC

Sleeves - Picture 2

Part # dRB-PIC12-4 4RB-PIC12-5 5RB-PIC12-6 6RB-PIC12-7 7

PICCO sleeves are also used for boring bar sleeves - see catalog "reduction sleeves"

Sample of application

Pic. 2:

Sleeves with bore-Ø d = 3 - 10 mm

Pic. 1:Holder


E

Holders for HORN Inserts

Type 105 & 105 with Extended Clamping Shank

Pic. 1 Pic. 2

Part # For insert type

HV-H105 105HV-H105L 105 Extended

Type 110

Part # For insert type

HV-H110 110

Sample of Application

Sample of applications


E

For APPLITEC - Inserts

TOP - Line

HV-APL- TOP740-R HV-APL- TOP760-R

Part # L For insert series

HV-APL- TOP740-R 26 TOP 74XHV-APL- TOP730-L 26 TOP 73X

HVL-APL- TOP740-R 43 TOP 74XHVL-APL- TOP730-L 43 TOP 73X

HV-APL- TOP760-R 27 TOP 76XHV-APL- TOP750-L 27 TOP 75X

HVL-APL- TOP760-R 44 TOP 76XHVL-APL- TOP750-R 44 TOP 75X

ECO - Line

HV-APL-ECO260-R


HV-APL-ECO260-R 26 ECO 26XHV-APL-ECO250-L 26 ECO 25X

HVL-APL-ECO260-R 43 ECO 26XHVL-APL-ECO250-L 43 ECO 25X

300 - Line

HV-APL-340


HV-APL-340-R 26 34XHV-APL-330-L 26 33X

HVL-APL-340-R 43 34XHVL-APL-330-L 43 33X


E

Double and Triple Holders for Collet Holders ER 11 & ER16

Pic. 1 Pic. 2 Pic. 3

Part # For collet holders Picture

HV-ER2 EM111620. EM161620 1HV-ER3 EM111620. EM161620 2

HV-ER3-17 EM111620 3

Sample of Application

HV - ER2Use with 2 Collet holders EM111620

HV - ER3Use with 3 Collet holders EM161620

HV - ER3-17Use with 3 Collet holders EM111620

also for EM161620, RB16 ... also for EM111620, RB16 ... also for RB16 ...

5656Backworking Insert Holders

F

Parts Inserts Screws Spanner For Holder

CC..32.5 A12-W6040082 T15

STAR-SCLCR09-SW/SWIKSTAR-SCLCR09-SDUCL11-OXOSW/SWIKSTAR-SCLCR09-SDUCL11-ECOSW/SWIKSTAR-SCLCR09-SVUCL11-OXOSW/SWIKSTAR-SCLCR09-SVUCL11-ECOSW/SWIKSTAR-ER16-SCLCL09-OXOSW/SWIK STAR-ER16-SCLCL09-ECOSW/SWIK

DC..32.5 A12-W6040082 T15

STAR-SDUCR11-SW/SWIKSTAR-SCLCR09-SDUCL11-OXOSW/SWIKSTAR-SCLCR09-SDUCL11-ECOSW/SWIKSTAR-SVQCR11-SDUCL11-OXOSW/SWIKSTAR-SVQCR11-SDUCL11-ECOSW/SWIK

VB..33 A12-W6040082 T15 STAR-SVUBR16-SW/SWIK

VC..22 A12-W6025060 T8

STAR-SVUCR11-SW/SWIKSTAR-SCLCR09-SVUCL11-OXOSW/SWIKSTAR-SCLCR09-SVUCL11-ECOSW/SWIKSTAR-SVQCR11-SDUCL11-OXOSW/SWIKSTAR-SVQCR11-SDUCL11-ECOSW/SWIK

BIMU 1040 R A12-W6035090 T15

STAR-SCLCR09-SDUCL11-OXOSW/SWIKSTAR-SCLCR09-SVUCL11-OXOSW/SWIKSTAR-SVQCR11-SDUCL11-OXOSW/SWIKSTAR-ER16-SCLCL09-OXOSW/SWIK

BIMU 1040 L A12-W6035090 T15

STAR-SCLCR09-SDUCL11-OXOSW/SWIKSTAR-SCLCR09-SVUCL11-OXOSW/SWIKSTAR-SVQCR11-SDUCL11-OXOSW/SWIKSTAR-ER16-SCLCL09-OXOSW/SWIK

ER16 A12-W6035120 T10 STAR-ER16-SCLCL09-OXOSW/SWIKSTAR-ER16-SCLCL09-ECOSW/SWIK

APPLITEC ECO 25X A12-W4540089 T15

STAR-SCLCR09-SDUCL11-ECOSW/SWIKSTAR-SCLCR09-SVUCL11-ECOSW/SWIKSTAR-SVQCR11-SDUCL11-ECOSW/SWIKSTAR-ER16-SCLCL09-ECOSW/SWIK

APPLITEC ECO 26X A12-W4540089 T15

STAR-SCLCR09-SDUCL11-ECOSW/SWIKSTAR-SCLCR09-SVUCL11-ECOSW/SWIKSTAR-SVQCR11-SDUCL11-ECOSW/SWIKSTAR-ER16-SCLCL09-ECOSW/SWIK

Spacer UR16-01M

STAR-ER16-SCLCL09-OXOSW/SWIKSTAR-ER16-SCLCL09-ECOSW/SWIK

Clamping Screw KS-M3-T10 STAR-ER16-SCLCL09-OXOSW/SWIKSTAR-ER16-SCLCL09-ECOSW/SWIK

Nozzle HV-KD055 all Holders

Screw f. Nozzle A98-7991-30008 (DIN 7991 - M3x8 4,8N) all Holders

AC-Pin A98-G1/8" (DIN 906 - G1/8'') for all SWAK-Holders

STAR-IC-Pin -BOLT-IK-STAR for all SWIK-Holders

O-Ring DIN 3771 - 5x1,5 or all SWIK-Holders

Screw f. Holder A98-7379-40016 (ISO 7379 - M4x16) all Holders

Insert Holder for Backworking Spare Parts


F

Part-no.: STAR-SCLCR09-SWSTAR-SCLCL09-SW

right version

left

for:SW12RII; SB12/20R; SR20JII SV20R; SR20RIV; SW20; SR38

Insert: CC..32.5 Screw: A12-W6040082 Wrench: T15

Part-no.: STAR-SCLCR09-SWIKSTAR-SCLCL09-SWIK

right versionleft

For: SR38; SR32JII

Insert: CC..32.5 Screw: A12-W6040082 Wrench: T15

Insert Holder SCLCR/L09 for Backworking with AK (coolant)

Insert Holder SCLCR/L09 for Backworking with IK (coolant)


F

Part-no.: STAR-SDUCR11-SWSTAR-SDUCL11-SW

right version

leftfor:

SW12RII; SB12/20R; SR20JII SV20R; SR20RIV; SW20; SR38

Insert: DC..32.5 Screw: A12-W6040082 Wrench: T15

Part-no.: STAR-SDUCR11-SWIKSTAR-SDUCL11 -SWIK

right versionleft

For: SR38; SR32JII

Insert: DC..32.5 Screw: A12-W6040082 Wrench: T15

Insert Holder SDUCR/L11 for Backworking with AK (coolant)

Insert Holder SDUCR/L11 for Backworking with IK (coolant)


F

Part-no.: STAR-SVUBR16-SW (right version) for:SW12RII; SB12/20R; SR20JII SV20R; SR20RIV; SW20; SR38

Insert: VB..33 Screw: A12-W6040082 Wrench: T15

Part-no.: STAR-SVUBR16-SWIK (right version) for: SR38; SR32JII

Insert: VB..33 Screw: A12-W6040082 Wrench: T15

Insert Holder SVUBR16 for Backworking with AK (coolant)

Insert Holder SVUBR16 for Backworking with IK (coolant)


F

Part-no.: STAR-SVUCR11-SW (right version) for:SW12RII; SB12/20R; SR20JII SV20R; SR20RIV; SW20; SR38

Insert: VC..22 Screw: A12-W6025060 Wrench: T8

also available in left version

Part-no.: STAR-SVUCR11-SWIK (right version) For: SR38; SR32JII

Insert: VC..22 Screw: A12-W6025060 Wrench: T8

Insert Holder SVUCR11 for Backworking with AK (coolant)

Insert Holder SVUCR11 for Backworking with IK (coolant)


F

Part-no.: STAR-SCLCR09-SDUCL11-OXOSW (BIMU-Platte - insert) for:SW12RII; SB12/20R; SR20JII SV20R; SR20RIV; SW20; SR38

Insert right: CC..32.5 Insert left: DC..32.5

Cut-in insert frontal : BIMU 1040 R / L

Part-no.: STAR-SCLCR09-SDUCL11-OXOSWIK (insert) For: SR38; SR32JII



Cutting positions of all inserts are marked on the holder


Insert Holder SCLCR09 / SDUCL11 for Backworking with AK (coolant)

Insert Holder SCLCR09 / SDUCL11 for Backworking with IK (coolant)


F

Part-no.: STAR-SCLCR09-SVUCL11-OXOSW (insert) for: SW12RII; SB12/20R; SR20JII SV20R; SR20RIV; SW20; SR38

Insert right: CC..32.5 Insert left: VC..22


Part-no.: STAR-SCLCR09-SVUCL11-OXOSWIK (insert) for: SR38; SR32JII;

Insert right: CC..32.5 insert left: VC..22

cut-in insert frontal : BIMU 1040 R / L



Insert Holder SCLCR09 / SVUCL11 for Backworking with AK (coolant)

Insert Holder SCLCR09 / SVUCL11 for Backworking with IK (coolant)


F

Part-no.: STAR-SVQCR11-SDUCL11-OXOSW (BIMU- insert) for:SW12RII; SB12/20R; SR20JII SV20R; SR20RIV; SW20; SR38

Insert right: VC..22 Insert left: DC..32.5


Part-no.: STAR-SVQCR11-SDUCL11-OXOSWIK (BIMU-insert) for: SR38; SR32JII





Insert Holder SVQCR11 / SDUCL11 for Backworking with AK (coolant)

Insert Holder SVQCR11 / SDUCL11 for Backworking with IK (coolant)


F

Part-no.: STAR-ER16-SCLCL09-OXOSW (insert) for:SW12RII; SB12/20R; SR20JII SV20R; SR20RIV; SW20; SR38

Insert right: threading insert ER16 Insert left: CC..32.5


Part-no.: STAR-ER16-SCLCL09-OXOSWIK (insert) for: SR38; SR32JII

Insert right: Threading insert ER16 Insert left: CC..32.5




Insert Holder ER16 / SCLCL09 for Backworking with AK (coolant)

Insert Holder ER16 / SCLCL09 for Backworking with IK (coolant)


F

Part-no.: STAR-SCLCR09-SDUCL11-ECOSW (APPLITEC- insert) for:SW12RII; SB12/20R; SR20JII SV20R; SR20RIV; SW20; SR38


Cut-in insert frontal : APPLITEC ECO 25X / 26X

Part-no.: STAR-SCLCR09-SDUCL11-ECOSWIK (APPLITEC - insert) for: SR38; SR32JII





Insert Holder SCLCR09 / SDUCL11 for Backworking with AK (coolant)

Insert Holder SCLCR09 / SDUCL11 for Backworking with IK (coolant)


F

Part-no.: STAR-SCLCR09-SVUCL11-ECOSW (APPLITEC- insert) for:SW12RII; SB12/20R; SR20JII SV20R; SR20RIV; SW20; SR38

Insert right: CC..32.5 Insert left: VC..32.5


Part-no.: STAR-SCLCR09-SVUCL11-ECOSWIK (APPLITEC- insert) for: SR38; SR32JII

Insert right: CC..32.5 Insert left: VC..22




Insert Holder SCLCR09 / SVUCL11 for Backworking with AK (coolant)

Insert Holder SCLCR09 / SVUCL11 for Backworking with IK (coolant)


F

Part-no.: STAR-SVQCR11-SDUCL11-ECOSW (APPLITEC- insert) for: SW12RII; SB12/20R; SR20JII SV20R; SR20RIV; SW20; SR38



Part-no.: STAR-SVQCR11-SDUCL11-ECOSWIK (APPLITEC-insert) for: SR38; SR32JII





Insert Holder SVQCR11 / SDUCL11 for Backworking with AK (coolant)

Insert Holder SVQCR11 / SDUCL11 for Backworking with IK (coolant)


F

Part-no.: STAR-ER16-SCLCL09-ECOSW (APPLITEC- insert) For: SW12RII; SB12/20R; SR20JII SV20R; SR20RIV; SW20; SR38

Insert right: threading insert ER16 Insert left: CC..32.5


Part-no.: STAR-ER16-SCLCL09-ECOSWIK (APPLITEC- insert) for: SR38; SR32JII

Insert right: Threading insert ER16 Insert left: CC..32.5




Insert Holder ER16 / SCLCL09 for Backworking with AK (coolant)

Insert Holder ER16 / SCLCL09 for Backworking with IK (coolant)

707090° Static Holders

G

Sleeve Holder 2 x Ø 22

Part # STAR-DP-SR20 For: SB-16D/E; SR-20RII-IV; SB-12/20R; SR-20J/JN

Sleeve holder 2 x 22 x 5 inch offset

Highest Precision (Jig Ground)High-Tensile Tool Steel - Very Solid

Part # STAR-DP-SR20R For: SB-16D/E; SR-20RII-IV; SB-12/20R; SR-20J/JN


G



Part # STAR-TP-SR32-22 For: SR-32J / JN


Part # STAR-TP-SR20R-22 For: SB-16D/E; SR-20RII / IV; SB-12/20R; SR-20J/JN


G


Sleeve Holder 3 x Ø 25.4





G


Part # STAR-BWES-SW-84 for SW-20, SR-20RIV

Electric Spindle Holder

Part # STAR-BWES-SW-44 for SW-20, SR-20RIV

Electric Spindle Holder

7575Driven Fixtures

H

for

SV-12, ECAS-12/20, SV-20SB-12/20R, SB-16D/ESR-20J/JN/RII-IV, SW-20SV-32, SV-32J, SV-32JII SR-32, SR-32J/JNSV-38R

Technical data

Collet ER16

Ratio 1 : 1

Rpm at input max. 8000 1/min

Rpm at output max. 8000 1/min

Torque at output max. 13 Nm

Direction of Rotation Input = Output: yes

LieferumfangIncluded

inkl. Mutterwith nut

ohne Spannschlüssel und Spannzangenwithout wrench and collets

IncludedWith nut

Without wrench and collets

Part # STAR331-50-ER16

Cross Drilling / Milling Unit ER16

7676Driven Fixtures

H


for

SV-12, ECAS-12/20; SV-20SB-12/20R, SB-16D/E SR-20J/JN/RII-IV, SW-20SV-32, SV-32J, SV-32JII SR-32, SR-32J/JN SV-38R

Technical data

Collet ER20

Ratio 1 : 1








IncludedWith nut



7777Driven Fixtures

H

Part # STAR331-50-WD08STAR331-50-WD12

for

SV-12, ECAS-12/20; SV-20SB-12/20R, SB-16D/E SR-20J/JN/RII-IV, SW-20SV-32, SV-32J, SV-32JII SR-32, SR-32J/JN SV-38R

Technical data

Tool fitting Ø 8 / Ø 12

Ratio 1 : 1








IncludedWith nut


Cross Drilling / Milling Unit Ø 8 / 12

7878Driven Fixtures

H


for

ECAS-12/20 SB-12/20R SR-20J/JN/RII-IV SW-20ECAS-32T SV-38R

Technical data

Collet ER16

Ratio 1 : 1








IncludedWith nut



7979Driven Fixtures

H


for

ECAS-12/20,SB-12/20R SR-20J/JN/RII-IVSW-20ECAS-32T SV-38R

Technical data

Collet ER20

Ratio 1 : 1








IncludedWith nut



8080Driven Fixtures

H

Part # STAR101-75

for

SV12, ECAS12/20, SV20SB12/20R, SB16D/ESR20J/JN/RII-IV, SW20SV32, SV32J, SV32JII SR32, SR32J/JNSV38R

Technical data

Collet ER11

Ratio 1 : 4

Rpm at input max. 5,000 1/min

Rpm at output max. 20,000 1/min






IncludedWith nut


Cross Drilling / Milling Unit ER11101-75

8181Driven Fixtures

H

Drilling / Milling Unit ER16For Backworking

Part # STAR0R1-61-ER16

forSB-12/20RSW-12RII SR-20RIVSW-20

Technical data

Collet ER16

Ratio 1 : 1








IncludedWith nut


8282Driven Fixtures

H


for

ECAS-12/20SB-12/20RSW-12RIISR-20J/JN/RII-IV,SR-32J/JN

Technical data

Collet ER16

Ratio 1 : 1








IncludedWith nut



8383Driven Fixtures

H

Part # STAR101-76

for

ECAS-12/20SB-12/20RSW-12RIISR-20J/JN/RII-IV,SR-32J/JN

Technical data

Collet ER11

Ratio 1 : 4

Rpm at input max. 5,000 1/min

Rpm at output max. 20,000 1/min






Drilling / Milling Unit ER11for Backworking

8484Driven Fixtures

H

Part # STAR101-68

Technical data

Collet ER20

Ratio 1 : 1

Rpm at input 6000

Rpm at output 6000

Torque at output 13 Nm

Shaft 44

Tool 1-13

for SR38


8585Driven Fixtures

H

Part # STAR201-50

Technical data

Collet ER16

Ratio 1 : 1

Rpm at input 6000

Rpm at output 6000

Torque 16

Shaft 44

Tool 0.5-10

for SV38R; SV32; ECAS32


8686Driven Fixtures

H


forSR-10J, ECAS-12/20 SB-12/20R, SW-12RII SR-20J/JN/RII-IVSR-32J/JN

Technical data

Collet ER11

Ratio 1 : 1








IncludedWith nut



8787Driven Fixtures

H

8888Driven Fixtures

H


for SR-32J/JN

Technical data

Collet ER11 / ER16

Ratio 1 : 1







IncludedWith nut


3-Spindle Counter Face Drilling / Milling Unit ER11/ER16

8989Driven Fixtures

H

3-Spindle Front Drilling / Milling Unit


for SB-16D/E; SB-12/20RSR-20J/JN/RII-IV

Technical data

Collet ER16

Ratio 1 : 1







IncludedWith nut


9090Driven Fixtures

H


Part # STAR7.074.006-ER16

for SR-20RIISR-20RIV

Technical data

Collet ER11 / ER16

Ratio 1 : 1







IncludedWith nut


9191Driven Fixtures

H


Part # STAR7.074.006-ER11

for SR-20RIISR-20RIV

Technical data

Collet ER11

Ratio 1 : 1







IncludedWith nut


9292Driven Fixtures

H

2-Spindle Front Drilling / Milling Unit


for SB-16D/E; SB-12/20RSR-20J/JN/RII-IV

Technical data

Collet ER16

Ratio 1 : 1







IncludedWith nut


9393Driven Fixtures

H



for SR-20J/JN/RII-IV

Technical data

Collet ER16 / ER11

Ratio 1 : 1






ohne Spannschlüssel und Spannzangen

IncludedWith nut


9494Driven Fixtures

H



for SR-20J/JN/RII-IV

Technical data

Collet ER11

Ratio 1 : 1




inkl. Mutter

IncludedWith nut


95Accessories

9696Accessories

I

Full System Example:

SP-BS-01-03 + SP-BS-03-02 Mounted on a STAROR-161 rotary tool holder

Back tool post of a Star SW-12RII

SP-BS-01-04 + SP-BS-03-04 Mounted on a STAR571-61-00 rotary tool holder

Back tool post of a Star SB-20RG

Example for 0R-161:

Example for 571-61:

9797Accessories

I

Blocking System Guide

SP-BS-01-00 Use with STAR 331-50 (ER16)

Does not include key ref. SP-BS-03-00

SP-BS-01-01 Use with STAR 7.072.950 (ER20)


SP-BS-01-03 Use with STAR 0R-161 (ER16)


SP-BS-03-01 Blocking key for use with ER20 collets


SP-BS-01-02 Use with STAR 571-55 & 7.073.0789 (ER16)


SP-BS-01-04 Use with STAR 571-61 (ER16)




9898Accessories

I

Blocking System for Tool Change

By inserting a locking key into the slot of the tool changing device the driven tool holder becomes blocked.Only one hand is needed to unscrew the collet nut.

Part # Description Machine

SP-BS-01-00Blocking system for mounting in radial rotary tool holder ref. 331-50-00 with ER16 collet in STAR lathes. *Does not include blocking key ER16 ref. SP-BS-03-00.

ECAS-12/20, SB-12/20R, SR-20J/JN, SR-20RII/III/IV, SR-32J/JN, SR-32JII, SV-12, SV-20, SV-32, SV-32JII, SV-38R, SW-20

SP-BS-01-01Blocking system for mounting in radial rotary tool holder ref. 7.072.950 with ER20 collet in STAR lathes. *Does not include blocking key ER20 ref. SP-BS-03-01.

SR-20J/JN, SR-20RII/III/IV, SR-32J/JN, SR-32JII, SV-12, SV-20, SV-32, SV-32JII, SW-20

SP-BS-01-02Blocking system for mounting in radial rotary tool holder ref. 571-55 or ref. 7.073.789 with ER16 collet in STAR lathes. *Does not include blocking key ER16 ref. SP-BS-03-00.

ECAS-12/20, ECAS-32T, SB-12/20R, SR-20J/JN, SR-20R/II/III/IV, SV-38R, SW-20

SP-BS-01-03Blocking system for mounting in back side tool holders ref. 0R1-61 with ER16 collet in STAR lathes. *Does not include blocking key ER16 ref. SP-BS-03-02.

SB-12/20R/RG, SR-32JII, SR-38, SV-20R, SW-12RII, SW-20.

SP-BS-01-04Blocking system for mounting in back side tool holders ref. 571-61 with ER16 collet in STAR lathes. *Does not include blocking key ER16 ref. SP-BS-03-03.

ECAS12/20, SB-12/20R/RG, SR-20J/JN, SR-20R/II/III/IV, SR-32J/JN, SR-32JII, SW-12RII.

SP-BS-03-00 Blocking key for ER16 collet for SP-BS-01-00/02. n/a

SP-BS-03-01 Blocking key for ER20 collet for SP-BS-01-01. n/a



Advantages:

9999Accessories

I

Coolant Distribution Guide

SP-BS-04-00 Use with Blocking system ref. SP-BS-01-02






SP-BS-05-00 Key for locking/unlocking the ball-type adjustable cooling outlet of the coolant distribution ring SP-BS-04-00/01/02/03.

SP-BS-05-01 Pin for orienting the ball-type adjust-able cooling outlet of the coolant distri-bution ring SP-BS-04-00/01/02/03.

Many different cooling fittings and hose items available. Choose thread, fitting angle, connetcion and hose type. Call to inquire about options.

100100Accessories

I

Coolant Distribution Ring

The Coolant Distribution Ring can be easily and efficiently oriented towards the cutting edge of the tools mounted in the driven tool holders. Mounts on top of the Blocking System for tool change (ref. SP-BS-01-XX).

Part # Description

SP-BS-04-00

Coolant Distribution Ring with inlet M8x1(F) and 3 adjustable ball-type nozzle outlets with ID:1 mm. To be mounted in STAR lathes:1. Radial driven tool holder ref. 331-50, 571-55, or 7.073.789 ER16 collet. Requires Blocking system ref. SP-BS-01-02 as a base for assembly.2. Radial driven tool holder ref. 7.072.950 with ER20 collet. For use with Blocking System ref. SP-BS-01-01.

SP-BS-04-02Coolant Distribution Ring with inlet M8x1(F) and 3 adjustable ball-type nozzle outlets with ID:1 mm. To be mounted in STAR lathes:Backworking driven tool holder ref. 0R1-61 with ER16 collet. For use with Blocking System ref. SP-BS-01-03.

SP-BS-04-03Coolant distribution ring with inlet M8x1(F) and 1 orientable ball-type nozzle outlets with ID:2 mm. To be mounted in STAR lathes:Backworking driven tool holder ref. 571-61-00 with ER16 collet. For use with Blocking System ref. SP-BS-01-04.

SP-BS-05-00 Wrench for locking/unlocking the ball-type adjustable cooling outlet of the coolant distribution ring SP-BS-04-00/01/02/03.

SP-BS-05-01 Pin for orienting the ball-type adjustable cooling outlet of the coolant distribution ring SP-BS-04-00/01/02/03.

Advantages:

Call 860-327-4200or visit us at

www.iSwissTools.com

iSwiss Corporation161 Sanrico Drive

Manchester, CT 06042Tel: 860-327-4200Fax: 860-327-4141

[email protected]

2021 Tool Holders and Accessories for Star CNC Machines · 2021. 2. 13. · 5 5 Collets & Guide...

Documents

Transcript of 2021 Tool Holders and Accessories for Star CNC Machines · 2021. 2. 13. · 5 5 Collets & Guide...