2020 Second International Conference on Recent Advances in...
8
2020 Second International Conference on Recent Advances in Materials and Manufacturing (ICRAMM 2020) Proceedings of the ICRAMM 2020 - Volume 1 Erode | Tamil Nadu | India 20 - 21, November 2020 | www.icramm.com Conference Series Velalar College of Engineering and Technology
Transcript of 2020 Second International Conference on Recent Advances in...
2020 Second International Conference on
Recent Advances inMaterials and Manufacturing
(ICRAMM 2020)
Proceedings of the ICRAMM 2020 - Volume 1
Erode | Tamil Nadu | India
20 - 21, November 2020 | www.icramm.com
Conference Series
Velalar College of Engineering and Technology
2020 Second International Conference on
Recent Advances in Materials and Manufacturing (ICRAMM 2020)
Partners
ICRAMM 2020
Dr. R. Kumaravelan,
Prof. & Head, Mechanical Engineering
VCET, Erode, India
Technical Program Committee – Chairs
Dr. C V Adake,
KLE Dr. MSSCET, Belagavi, India
Prof. P. Jayachandar,
Prof. & Dean (Student affairs), VCET, Erode, India
Dr. Thangaprakash Sengodan
Diligentec Solutions, Coimbatore, India
Organizing ChairChief Patron
Mr. S. S. Kandasamy
President, VCET, Erode, India
Patrons
Mr. S. D. Chandrasekar
Secretary / Correspondent, VCET, Erode, India
Mr. P. K. P. Arun
Treasurer, Velalar Educational Trust
Conference Chair
Dr. M. Jayaraman
Principal, VCET, Erode, India
Dr. Dinesh Agarwal, Pennstate University, USA
Dr. Subhashish Basu Majumdar, Indian Institute of Technology (IIT), Kharagpur
Dr. Arun Umarji, Indian Institute of Science (IISc), Bangaluru
Dr. Parag Bhargava, Indian Institute of Technology (IIT), Bombay
Dr. Somshekhar Hiremath, Indian Institute of Technology (IIT), Madras, Chennai
Dr. Balram Sahoo, Indian Institute of Science (IISc), Bangaluru
Dr. Marappagoundar Ramasamy, Universiti Teknologi PETRONAS (UTP), Malaysia
Dr. V N Mani, C-MET, Govt. of India, Hyderabad
Dr. Sundararajan Natarajan, Indian Institute of Technology Madras
Dr. Piyush Shakya, Indian Institute of Technology (IIT), Madras
Dr. Sriram Hedge, Indian Institute of Technology (IIT),Delhi
Dr. Karuna Kar Nandha, Indian Institute of Science (IISc), Bangaluru
Dr. Ramani Kannan, Universiti Teknologi PETRONAS (UTP), Malaysia
Dr. Anand Nayyar, Duy Tan University, Vietnam
Dr. K Hariharan, Indian Institute of Technology (IIT), Madras
Dr. Somashekara, Indian Institute of Technology (IIT), Dharwad
Dr. Saswata Bhattacharya, Indian Institute of Technology (IIT), Delhi
Dr. R N Patel, National Institute of Technology (NITR), Raipur
Dr. Sanjeevkumar, Aalborg University, Denmark
Dr. Dobbidi Pamu, Indian Institute of Technology (IIT), Guwahati
Dr. M Balasubramanian, Indian Institute of Technology (IIT), Madras
Dr. Baharudin Bin Ismail, Universiti Malaysia Perlis (UniMAP), Malaysia
Dr. S M Kulkarni, National Institute of Technology Karnataka (NITK), Surathkal
Dr. Tejas P Gotkhindi, Indian Institute of Technology (IIT), Dharwad
Dr. M R Doddamani, National Institute of Technology Karnataka (NITK), Surathkal
Dr. Archana M Nair, Indian Institute of Technology (IIT), Guwahati
Dr. M R Ramesh, National Institute of Technology Karnataka (NITK), Surathkal
Dr. Dhananjay Jolhe, Visvesvaraya National Institute of Technology (VNIT), Nagpur
Dr. Singaperumal, Indian Institute of Technology (IIT), Madras
Dr. B Chittibabu, IIITDM, Chennai
Dr. K Venkateshwaralu, NAL, Bangalore
Dr. Chetan Jarali, NAL, Bengaluru
Dr. V N Gaitonde, KLE Technological University, Hubballi
Dr. S B Patil, PDA College of Engineering, Kalaburagi
Dr. M A Kamoji, KLE Dr MSSCET, Belagavi
Dr. U B Deshannavar, KLE Dr MSSCET, Belagavi
Dr. P Srinivasan, BITS, Pilani
Dr. Qasim Murtaza, Delhi Technological University, New Delhi
Dr. Rajesh P Mishra, BITS, Pilani
Dr. S N Sapali, College of Engineering, Pune
Dr. K P Venkatesh, BITS, Pilani
Dr. Chandrashekhar M Sewatkar, College of Engineering, Pune
Dr. Srikanta Routroy, BITS, Pilani
Dr. Lucky Krishnia, Delhi Technological University, New Delhi
Dr. Gagan Kumar, Indian Institute of Technology (IIT), Guwahati
Dr. Bharti Singh, Delhi Technological University, New Delhi
Dr. P P Deshpande, College of Engineering, Pune
Dr. Vinod Singh, Delhi Technological University, New Delhi
Dr. Sujit S Pardeshi, College of Engineering, Pune
Dr. V Manjuladevi, BITS, Pilani
Dr. Shweta N Chaure, College of Engineering, Pune
Dr. Sujit Manna, Indian Institute of Technology (IIT), Delhi
Dr. L V Bhandarkar, College of Engineering, Pune
Dr. C Sujatha, Indian Institute of Technology (IIT), Madras
Dr. S R Patil, Institute of Science, Nagpur
Dr. S B Patil, College of Engineering, Pune
Dr. Sindhu Nair, Birla Institute of Technology (BITS), Pilani
Technical Program Committee
Keynote Speakers
Dr. Mrityunjay Doddamani
NIT Karnataka
India
Dr. Dr. Sahrim Hj Ahmad
Universiti Kebangsaan Malaysia
Malaysia
Dr. Balasubramanian V
Annamalai University
India
Dr.V N Mani
C-MET, DEITY
Government of India
Organized by Publishing Partner Media Partner
Velalar College of Engineering and Technology
CMS Partner
DILIGENTEC SOLUTIONS
CONTENT
i | ICRAMM 2020 – VOLUME 1
RECENT ADVANCES IN MATERIALS & MANUFACTURING
EMTP 5082 Characterization and Antibacterial Properties of Biogenic Spherical Silver
Nanoparticles K S Harisha, N Parushuram, R Ranjana, Lavita J Martis, B Narayana and Y Sangappa 001
EMTP 5089 Highly Stable Colloidal Gold Nanoparticles Using Biopolymer Silk Sericin:
Characterization and Antibacterial Activity N Parushuram, R Ranjana, K S Harisha, Lavita J Martis and Y Sangappa 007
EMTP 6005 Fabrication and Conductivity Study of Silver Nanoparticles Loaded Polyvinyl
Alcohol (PVA-AgNPs) Nanofibers K. Krishna, K. S.Harisha, R. Neelakandan, and Y. Sangappa 015
EMTP 6038 Ellipsometric and third-order nonlinear optical studies of pulsed laser deposited
aluminium doped zinc oxide thin films Prasad Kumar, S.M. Dharmaprakash, P.S. Patil and Neelamma B.G 022
EMTP 6065 Effect of post irradiation of IR light on the structural, morphological and optical
properties of ZnO thin film grown by CBD method N. Navya, K .K .Ribin and K. Naseema 032
EMTP 6067 Transport properties of n-type Cux-TiyCz thin film semiconductor at different
Cu/TiC ratios Avishek Roy, Arun Kumar Mukhopadhyaya, Sadhan Chandra Das, Abhijit Majumdar 038
EMTP 6069 Band Gap Energy Calculation of Cobalt Doped Bismuth Ferrite Nanoparticles Atul Kumar Sinha 046
EMTP 7002 Energy Transfer from Fluorescein dye dispersed with CdS Nanoparticles as
evidenced by emission spectrum measurements Mathew M. Mecheril and J. Philip 049
EMTP 7006 Beneficial modification of the electrical properties of ecofriendly ferroelectric
ceramic Na0.5Bi0.5TiO3 by substitution of low concentration of Ho+3 Abhinav Kumara and Saket Asthana 054
EMTP 7010 Formation and photoluminescence of ZnS:Tb nanoparticles stabilized by
polyethylene glycol K R Bindu and E I Anila 061
EMTP 7015 Structural and Electronic Property of AlPO4 Modified LiMn2O4 Material for Li-
ion Battery Application ShwetambarPatel, Rajan Kumar Singh and Ranveer Kumar 066
EMTP 7056 Growth, Mechanical, Thermal and Nonlinear optical Properties of Magnesium
doped Ninhydrin crystals A. Ponchitra and K. Balasubramanian 071
EMTP 7065 An approach to the growth of calcium manganese hydrogen phosphate
(CaMnHPO4) single crystals (in-vitro study-I) in water glass medium at room
temperature and its characterization studies P.Krishnamoorthi and P. Sundaramoorthi 076
CONTENT
ii | ICRAMM 2020 – VOLUME 1
RECENT ADVANCES IN MATERIALS & MANUFACTURING
EMTP 7081 Potato peel waste as reductant for the biogenesis of gold and silver
ultrafineparticles S.Pirathiba and B.S.Dayananda 080
EMTP 7084 Flexible Bandpass Filter with Silver Conductive Layer for GPS, ISM, PCS,
LTE and WLAN applications K.V.Vineetha, M.Siva Kumar, B.T.P.Madhav and M.C.Rao 088
EMTP 7086 Selection of Materials for Improvement in Performance Parameters of DSSC Shivani Arora Abrol, Cherry Bhargava and Pardeep Kumar Sharma 099
EMTP 7087 Synthesis and Optical Properties of TernaryTeO2-Bi2O3-Na2O Glass System Sunil Jat, Ratnesh K. Sharma, S. K. Mahajan, Mohammad Ashiq and Ghizal F.Ansari 110
EMTP 7091 Composition tailored isotropic and anisotropic Wet Etching of Glass Aibhattra M Manasa, Bagur R Deepu and PurakkatSavitha 115
EMTP 8003 Design and simulation of stacked PVDF layers with ZnO for piezoelectric
nanodevices Kashish Malhotra, M Uttara Kumari, Shireesha G and Sudha R Karbari 120
EMTP 8008 Efficient Stable-Width Adder-Sapling Strategy using Brent Kung Adder B. Pushpalatha, T. Pavani and A. Ushasree 125
EMTP 8035 A Surface Micromachining: HNA Etchant for Stiction-free Release of Micro
and Nanomechanical Structures Bagur R Deepu, P Venkatachalam, Fakirappa N Mirji, Varghese Littin, Hebbal Naveen,
Purakkat Savitha and Yeriyur B Basavaraju 133
EMTP 5068 Non enzymatic electrochemical detection of Paraoxon Methyl using Zinc
oxideGraphene nanocomposite in water and food samples Ankita E. Parab, K. Mohanapriya, and Neetu Jha 139
EMTP 6033 Synthesis and non-isothermal decomposition of copper(II) complex under
dynamic nitrogen atmosphere E. Dhineshkumar, G. Rajarajan, V. Thanikachalam, M. Seenivasan and Jean Rebeiro 151
EMTP 6035 Thermo analytical Study of Nitrones in Static Air G. Rajarajan, E. Dhineshkumar, Thanikachalam, M. Seenivasan and C. Praveena 161
EMTP 6042 In VitroAntimicrobial Screening of Methanolic extract of Mikaniamicranthaand
Drymariacordataagainst S. Aureusand itstextile application Rupjyoti Neog and Namrita Kola 171
EMTP 6076 Convective heat and mass transfer of chemically reacting fluids with activation
energy along with Soret and Dufour effects Poosappan Yesodha, M. Bhuvaneswari, S. Sivasankaran∙and K. Saravanan 177
EMTP 6079 Review on poly(ethylene oxide)-based electrolyte and anode nanomaterials for
the internet of things node-level lithium-ion batteries Wasim Ghder Soliman, Ch.Swathi, T.Yasasvi, B. Keerthi Priya and D. Akhila Reddy 186
CONTENT
iii | ICRAMM 2020 – VOLUME 1
RECENT ADVANCES IN MATERIALS & MANUFACTURING
EMTP 7016 Functionalization of Cotton Fabric with Titania Silica Aerogel Using Rice Husk
as Precursor for Enhanced UV Shielding P. Thennarasu, M. Senthilkumar and P. Prabunathan 196
EMTP 7019 Evaluation of Anti-Cancer Activity of Phytosomes Formulated from Aloe vera
Extract Murugesan M P, Ysacor Mengitsu, Venkata Ratnam M, and Kannan Kandasamy 208
EMTP 7026 Investigation of Structural and Chemical Properties of Nanocrystalline Titanium
Oxide Material Priyanka Gupta and Vandana Rathore 215
EMTP 7031 Stimulation of Pithecellobium dulce (jungle jalebi) seed with electromagnetic
exposure and its impact on biochemical parameter and growth PriyankaSingh, ManishaAgrawal, NishaGupta and ArundhatiKhandelwal 226
EMTP 7040 Structural, Photoluminescence, and Photocatalytic Properties of Mn and Eu co-
doped ZnO Nanoparticles Jagriti Gupta, P.A. Hassan and K. C. Barick 233
EMTP 7064 Polyvinyl alcohol/Methyl Orange Flexible Film as Reusable pH Indicator Kumari Nisha S, Sarika Sivakumar and Achutha S 239
EMTP 7071 Synthesis, Characterization and Ion-exchange Properties of 4,4 Oxy-dianiline,
2,6 diamino-pyridine with Formaldehyde Terpolymer N. Sidharaj, G. Rajarajan and M. Senthil 245
EMTP 7076 Mikania mikrantha leaf extract mediated biogenic synthesis of magnetic iron
oxide nanoparticles: Characterization and its antimicrobial activity study Aayushi Biswas, C. Vanlalveni, R. Lalfakzuala, Soumitra Nath and Lalthazuala Rokhum 254
EMTP 7080 Fly ash to solid base catalyst: Synthesis, characterization and catalytic
application Stuti Katara, Sakshi Kabra, Deepti Goyal, Renu Hada, Anita Sharma and Ashu Rani 264
EMTP 7085 Preparation and Characterization of Boron Doped CN’S/MnO2 and Its
Photocatalytic Application of Dye Degradation M. Gayathri, M. Shanthi, E.Satheeshkumar, N. Jayaprakash and E. Sundaravadivel 273
EMTP 7093 Studies on Ionic Mass Transfer in an Electrolytic Cell in the Presence of
Triangle Teethed Baffles N. Chitti Babu, P. Ramyakrishna and M. Tukrambai 281
EMTP 7094 Enhancement of Mass Transfer Coefficient by Using of Single Pentagonal Plate
as Turbulence Promoter in Circular Conduit L. Neelima chandralekha, M. Tukarambai, N. Chitti babu, and V. Nageswara Rao 292
EMTP 7096 Decolourization of Eosin Yellow (EY) dye using a variety of Brown Algae M. Tukaram Bai, Y V Anudeep, Ch. A. I. Raju, P Venkata Rao and N Chittibabu 303
EMTP 8012 Anticorrosion activities of polymethacrylic acid and grafted/modified
polymethacrylic acid on pure aluminium in acid medium J. Devakumar, V. Ramesh, P. Amaladass, and R. Jaya Santhi 315
CONTENT
iv | ICRAMM 2020 – VOLUME 1
RECENT ADVANCES IN MATERIALS & MANUFACTURING
EMTP 8013 Ultraviolet light induced dye degradation of methylene blue in the presence of
photocatalytic CdSe and ZnSe Nanoparticles D.V. Sridevi, V. Ramesh and E. Sundaravadivel 330
EMTP 8045 Removal of Hexavalent Chromium-Industry treated water and Wastewater: A
Review S. S. Kerura, Sneha Bandekar, Ratnamala G.M, Santosh S. Nandi, Prasad G. Hegde
and Manjunath. S. Hanagadakar 338
EMTP 8047 Design, Synthesis, characterization and biological evaluation of some 2-(E)-(N-
(azobenzyl)-4-iminoethan-1-yl)-10H-phenothiazines S. Shanmugam, K. Neelakandan, M. Gopalakrishnan and S. Pazhamalai 350
EMTP 8058 Novel Schiff base Synthesis of E-N-(1-(1H-phenothiazin-2yl)-ethylidene)-3-
((E)-(2-phenylhydrazono) methyl) aniline “Turn-on” fluorescent chemosensor
for sensitivity and selectivity of detection of Cr3+ and Pb2+ P. Vijayakumar, E. Dhineshkumar, M. Arockia doss, Nargis Nagar sardar and
R. Renganathan 365
EMTP 8064 Novel Synthesis, spectral characterisation and DFT calculation of (3,4-bis((E)-
(substituted-dichlorobenzylidene) amino)phenyl)(phenyl) methanone derivatives E. Enbaraj, E. Dhineshkumar, K.R. Jeyashri, G. Logeshwari, V. Mohana, V. Rajathi,
H. Manikandan, J. Chakkaravarthy and R. Govindaraju 377
EMTP 8065 Removal of manganese from synthetic waste waters with Parthenium
Hysteroporous bud and leaf powder and optimization using Artificial Neural
Networks and Response Surface Methodology CH. A. I. Raju, N. M. Yugandhar, S. Sirisha Naidu, CH. Beena and M. Tukaram Bai 387
EMTP 8018 Green Synthesis of Iron Nanoparticles by Green Tea and Black Tea Leaves
Extract Tejaswi Mareedu, VenkataRao Poiba and Meena Vangalapati 404
EMTP 7010 Impedance Spectroscopic Studies of Lead ZirconateTitanate Ferroelectrics Balgovind Tiwari, T. Babu, and R.N.P. Choudhary 408
Each submitted manuscript will receive a unique paper ID. The manuscripts will be initially screened to check for the conference scope and
originality. All the submitted manuscripts will be sent for technical peer review process and the corresponding author will be notified the
outcome of the review process. ICRAMM adopts double blind review process. If reviewers had recommended for further improvements in the
manuscript, the manuscript will be sent back to the corresponding author and the revised version of the manuscript shall be submitted within
fifteen days on the date of notification. The final decision on the manuscript will be announced after the third round of evaluation by the
technical program committee.
The registered and presented papers of the ICRAMM will be published in into the book of conference proceedings and the hard copy of
the book of proceedings will be given to the participants during the conference. All the accepted and registered papers of ICRAMM will
be published in the Elsevier's Materials Today Proceedings (a conference proceedings journal ) which is indexed in CPCI - Web of Science
(Thomson Reuters), SCOPUS, etc.
Publications
The 2020 Second International Conference on Recent Advances in Materials and Manufacturing (ICRAMM 2020) aims for a great gathering of
both industrial and academic professionals across the world in the fields of materials science and manufacturing technology. It provides a
major forum for the exchange of information among practicing professionals in the areas of Materials and Manufacturing. ICRAMM 2020 is
organized by the Department of Mechanical Engineering, Velalar College of Engineering & Technology, Erode, Tamil Nadu, India during 20 - 21,
November 2021. Erode is well connected by the road and rail with the Indian cities and by air with the international destinations. ICRAMM 2020
is dedicated to bringing up substantial discussions on major sectors of advanced materials processing, characterization techniques, modeling
& simulation, material properties, performance and device fabrication. ICRAMM 2020 provides a platform to the research scholars, faculty,
scientists and industry professionals to share their research findings, solutions to the domain problems and their valuable experience. The
conference will feature keynote and plenary lectures from eminent personalities of IITs, NITs, R&D organizations and other reputed institutes
in India and across the world.
ICRAMM
Call for Papers
Topics
Research manuscripts and proposals are invited in the following topics (but not limited to)
Advanced Materials
Ceramics, Shape Memory Alloys and
Nanomaterials
Materials for Aerospace Applications
Polymers and Polymer Composites
Glasses and Amorphous Systems
Characterization and Testing
MEMS/NEMS
Bio Materials
Building Materials
Chemical Materials
Optical/Electronic Materials
Magnetic Materials
3D materials
Cryogenic materials
Manufacturing
Micro/Nano Machining
Metal Forming
Green Manufacturing
Non-Conventional Machining Processes
Additive Manufacturing
Metal Joining
Subtractive Manufacturing
Sustainable Manufacturing Technologies
Embedded system
Sensors for automation
Vibration engineering
Mechanical dynamics and vibration
Mechanical strength
Mechanical design
Casting technology and equipment
Welding technology and equipment
Plastic processing technology
Cellular manufacturing
Advanced manufacturing processes
ICRAMM 2020 invites full length original research contributions from science, engineering professionals from industries, R&D organisations,
academic institutions, government departments and research scholars from across the world. Full length original research contributions and
review articles not exceeding twelve pages as per the Elsevier single column format shall be submitted. Extra page charge is applicable for the
manuscripts with more than twelve pages. The manuscript should contribute original research ideas, developmental ideas, analysis, findings,
results, etc. The manuscript should not have been published in any journals/magazines or conference proceedings and not under review in any
of them. Further the manuscript should contain the name of the corresponding author with e-mail id and affiliation of all authors. Soft copy of
the full length manuscripts (in .doc and .pdf) shall be submitted to ICRAMM office as per the submission guidelines.
Peer review policy
OrganizersDepartment of Mechanical Engineering, Velalar College of Engineering and Technology, Belagavi, Karnataka, India
Research & Development Wing, Diligentec Solutions, Coimbatore, Tamil Nadu, India
DILIGENTEC SOLUTIONSCoimbatore I Tamil Nadu I India
(+91) 78680 [email protected]
ISSN: 2214-7853
ICRAMM 2020
Velalar College of Engineering and Technology
DILIGENTEC SOLUTIONS
