2019 PRODUCT CATALOGUE - PQ Plus · CATALOGUE. 2 2019 product catalogue PQ PLUS General information...

PQ PLUS – Plus-sized servicesOur products offer our customers a complete range for mastering all EMAS tasks and therefore instruments to use electrical energy sustainably. As a complete provider, we implement the entire project from A-Z, from project consultation to commissioning, training and maintenance measures.

General information

Transformers

Software solutions

Services

Hardware components - measuring equipment

Reactive power compensations

Accessories

Energy management

2019 PRODUCT CATALOGUE

2 PQ PLUS2019 product catalogue

General information

Our solutions for your networked world.

Eth

erne

t lev

el (T

CP

/IP)

Fiel

d bu

s le

vel (

e.g.

Mod

bus

RTU

)A

nalo

gue/

stat

us/im

puls

e le

vel

ENVIS WebNetwork analysis software

Mobile Web serversClientsSQL databaseServers

E-Mess-S7-11

UMD 97CBM UMD 704 CMD 68

Water meters Gas meters Compressed air Alarm light

UMD 705E UMD 710A UMD 807E UMD 701

UMD 701

UMD 701 RCM

UMD 701RCM

UMD 97E

UMD 96S

PQ M centre

http://www.ausschreiben.de/katalog/pq_plus/position/4

3PQ PLUS 2019 product catalogue

General information

Table of contents

General information ..................................................................................................................... 2

Our solutions for your networked world..................................................................................... 2Table of contents ....................................................................................................................... 3

Hardware components - measuring equipment........................................................................... 7

UMD 95 – Measuring equipment for installation in a control board .......................................... 8UMD 96 – Measuring equipment for installation in a control board ........................................ 11UMD 97 – Measuring equipment for installation in a control board ........................................ 15UMD 97EVU – Measuring equipment for CAT IV environments ............................................. 19UMD 98 – Measuring equipment for installation in a control board ........................................ 22UMD 807 – Measuring equipment for installation in a control board ...................................... 26UMD 913 – Measuring equipment for installation in a control board ...................................... 29UMD 701 – Measuring equipment for the top hat rail ............................................................. 34UMD 704 – Measuring equipment for the top hat rail ............................................................. 38UMD 705 – Measuring equipment for the top hat rail ............................................................. 41UMD 707RCM – Measuring equipment for the top hat rail ..................................................... 44UMD 707DC – Measuring equipment for the top hat rail ........................................................ 46UMD 709 / 710A – Measuring equipment for the top hat rail .................................................. 49UMD 710EVU – Measuring equipment for CAT IV environments ........................................... 51IO-M 500 – I/O extension modules for UMD measurement devices ....................................... 54Firmware modules................................................................................................................... 55Measuring AC-DC networks .................................................................................................... 56Residual current measurement ............................................................................................... 57MMD 97 – Mobiles PQ measurement device.......................................................................... 58MMD 710 – Class A................................................................................................................. 62CMD 68-MID – Energy meter.................................................................................................. 66CMD 68-5MID – Transformer meter........................................................................................ 67CMD 68-45MID – Alternating current meter ............................................................................ 68CMD 68-100MID – Three-phase current meter ...................................................................... 69CMD 68-MID – Network meter ................................................................................................ 70PQ M centre ............................................................................................................................ 72

Additional online information is available at AUSSCHREIBEN.deThe descriptive texts for our products are now available in a suitable format on the www.ausschreiben.de platform. The existing products are highlighted with the following note in the catalogue. ausschreiben.de



General information

PQ PLUS types UMD 95UMD 96 UMD 97 UMD 98 UMD 807 UMD 913 UMD 701 UMD 704 UMD 705

UMD 707RCMM S EL CBM E EL EVU RCM RCM-T E EL G RCM M EL CBM E

Measuring range 8-620 VLL 8-865 VLL 8-865 VLL 8-865 VLL 20-1090 VLL 5-1470 VLL 8-360 VLN 11-520 VLL 7-720 VLL 5-1470 VLL

Supply voltage 85-275 VAC20-75 VDC

85-275 VAC20-75 VDC

100-275 VAC20-75 VDC

24 VDC100-275 VAC 90-350 VDC

75-500 VAC 90-600 VDC

75-500 VAC 90-600 VDC

85-275 VAC20-75 VDC

75-510 VAC20-75 VDC

85-510 VAC20-75 VDC

65-275 VAC

Overvoltage category 300 V / CAT III 300 V / CAT III 300 V / CAT III CAT IV 300 V / CAT III 300 V / CAT III 300 V / CAT III 300 V / CAT III 300 V / CAT III 300 V / CAT III 300 V / CAT III

Phase measurement 3U, 3I 3U, 3I 3U, 3I 3U, 4I, 2Ircm 3U, 4I, 1Ircm 3U, 3I 4U, 4I, 2Ircm 1U, 8I 4U, 4I 3U, 3I 3U, 5Ircm

Input signal 5 A;1 A 5 A;1 A;333 mV 5 A;1 A;333 mV 5 A;1 A 5 A;1 A 5 A;1 A 100 mA Ircm 100 mA 5 A;1 A Ircm

Frequency 40-70 Hz 40-70 Hz 40-70 Hz 40-70 Hz 40-70 Hz 40-70 Hz 40-70 Hz 40-70 Hz 40-70 Hz 40-70 Hz

Measurement in quadrants 4 4 4 4 4 4 - 4 4 4

Sampling rate 3.2 kHz 6.4 kHz 6.4 kHz 25.6 kHz 25.6 kHz 6.4 kHz 28.8 kHz 25.6 kHz 25.6 kHz 25.6 kHz 28.8 kHz

Averaging 80 ms 200 ms 200 ms 200 ms 200 ms 200 ms 200 ms 200 ms 200 ms 200 ms

Continuous measurement ● ● ● ● ● ● ● ● ● ●

Harmonic arrangement - 1 - 50 1 - 50 1 - 50 1 - 50 1 - 128 1 - 50 1 - 50 1 - 50 1 - 128

Interharmonic - - ○ PQ S ○ PQ S ○ PQ S ● - - ○ PQ S ○ PQ S

THD-U % ● ● ● ● ● ● ● ● ● ●

THD-I % ● ● ● ● ● ● ● ● ● -

Asymmetry - ● ● ● ● ● - ● ● ●

Flicker (Pst / Plt) - - ○ PQ S ○ PQ S ○ PQ S ● - - ○ PQ S ○ PQ S ○ PQ S

Events - voltage dips - - ○ PQ S ○ PQ S ○ PQ S ● - - ○ PQ S ○ PQ S ○ PQ S

Oscilloscopes - - ○ GO ○ GO ○ GO ● ○ GO - ○ GO ○ GO ○ GO

Class precision in % U/I 0.2 0.2 0.2 0.2 0.2 0.1 0.2 / 0.5 0.2 / 0.5 0.2 0.05

Active energy cl. 0.5s 0.5s 0.5s 0.5s 0.5s 0.2s 1 1 0.5s 0.2s

Digital I/O - 1 / 2 1 / 2 4 1 / 2 2 1 4+1** / 4 4 4+1** 2 / 1 2 / 1 - / 1 2 / 1 2 4

Relay output - ○ ○ 2 - 4 - 4 ○ ○ ○ -

Analogue I/O - - - 2/- *** 1/- *** 2 / 2 - / - - 2 / 2 - - - -

Temperature input PT100 - - - - 1 - 1 - 1 - - - 1

Internal temperature measurement - ● ● ● ● ● ● ● ● ●

Min/Max memory - ● ● ● ● ● ● ● ● ●

Memory size - - 512 MB 512 MB 512 MB 512 MB 512 MB - 512 MB 512 MB

Clock - - ● ● ● ● ● - ● ●

EN 50160 - - ○ PQ S ○ PQ S ○ PQ S ● PQ A - - ○ PQ S ○ PQ S ○ PQ S

Residual current - - - ● - ● - ● - - ●

Communication

RS485 - - - ● - ● ● - ● ● ● - ● ● ● - - ● ●

Ethernet - - - - ● - ● ● ● ● ● ● ● - - ● - ● ●

USB - - - - - ● ● ● ● ● ● ● - - - - ● - ●

Web servers - - - - ● - ● ● ● ● ● ● ● - - ● - ● ●

M bus - - ● - - - - - - - - - ○ - ● - - - -

Logs

Modbus RTU - - - ● - ● ● - ● ● ● ● ● ● - - ● ●

Modbus TCP - - - - ● - ● ● ● ● ● ● ● - - ● - ● ●

Gateway modbus master - - - - - - ● - ● ● ● - ● - - - - - ● ●

Mechanical attributes

Display LED LCD Colour LCD Colour LCD LCD Colour LCD - - Colour LCD -

Dimensions (mm) 96×96×80 96×96×80 96×96×80 96×96×80 144×144×80 144×144×80 106×90×58 106×90×58 106×90×58 106×90×58

Assembly Front Front Front Front Front Front DIN35 DIN35 DIN35 DIN35

● Standard | ○ Optional | *Available soon | ** 1 x relay output | *** Analogue input (RCM / 0-20 mA)


General information

PQ PLUS types UMD 95UMD 96 UMD 97 UMD 98 UMD 807 UMD 913 UMD 701 UMD 704 UMD 705

UMD 707RCMM S EL CBM E EL EVU RCM RCM-T E EL G RCM M EL CBM E

Measuring range 8-620 VLL 8-865 VLL 8-865 VLL 8-865 VLL 20-1090 VLL 5-1470 VLL 8-360 VLN 11-520 VLL 7-720 VLL 5-1470 VLL

Supply voltage 85-275 VAC20-75 VDC

85-275 VAC20-75 VDC

100-275 VAC20-75 VDC

24 VDC100-275 VAC 90-350 VDC

75-500 VAC 90-600 VDC

75-500 VAC 90-600 VDC

85-275 VAC20-75 VDC

75-510 VAC20-75 VDC

85-510 VAC20-75 VDC

65-275 VAC

Overvoltage category 300 V / CAT III 300 V / CAT III 300 V / CAT III CAT IV 300 V / CAT III 300 V / CAT III 300 V / CAT III 300 V / CAT III 300 V / CAT III 300 V / CAT III 300 V / CAT III

Phase measurement 3U, 3I 3U, 3I 3U, 3I 3U, 4I, 2Ircm 3U, 4I, 1Ircm 3U, 3I 4U, 4I, 2Ircm 1U, 8I 4U, 4I 3U, 3I 3U, 5Ircm

Input signal 5 A;1 A 5 A;1 A;333 mV 5 A;1 A;333 mV 5 A;1 A 5 A;1 A 5 A;1 A 100 mA Ircm 100 mA 5 A;1 A Ircm

Frequency 40-70 Hz 40-70 Hz 40-70 Hz 40-70 Hz 40-70 Hz 40-70 Hz 40-70 Hz 40-70 Hz 40-70 Hz 40-70 Hz

Measurement in quadrants 4 4 4 4 4 4 - 4 4 4

Sampling rate 3.2 kHz 6.4 kHz 6.4 kHz 25.6 kHz 25.6 kHz 6.4 kHz 28.8 kHz 25.6 kHz 25.6 kHz 25.6 kHz 28.8 kHz

Averaging 80 ms 200 ms 200 ms 200 ms 200 ms 200 ms 200 ms 200 ms 200 ms 200 ms

Continuous measurement ● ● ● ● ● ● ● ● ● ●

Harmonic arrangement - 1 - 50 1 - 50 1 - 50 1 - 50 1 - 128 1 - 50 1 - 50 1 - 50 1 - 128

Interharmonic - - ○ PQ S ○ PQ S ○ PQ S ● - - ○ PQ S ○ PQ S

THD-U % ● ● ● ● ● ● ● ● ● ●

THD-I % ● ● ● ● ● ● ● ● ● -

Asymmetry - ● ● ● ● ● - ● ● ●

Flicker (Pst / Plt) - - ○ PQ S ○ PQ S ○ PQ S ● - - ○ PQ S ○ PQ S ○ PQ S

Events - voltage dips - - ○ PQ S ○ PQ S ○ PQ S ● - - ○ PQ S ○ PQ S ○ PQ S

Oscilloscopes - - ○ GO ○ GO ○ GO ● ○ GO - ○ GO ○ GO ○ GO

Class precision in % U/I 0.2 0.2 0.2 0.2 0.2 0.1 0.2 / 0.5 0.2 / 0.5 0.2 0.05

Active energy cl. 0.5s 0.5s 0.5s 0.5s 0.5s 0.2s 1 1 0.5s 0.2s

Digital I/O - 1 / 2 1 / 2 4 1 / 2 2 1 4+1** / 4 4 4+1** 2 / 1 2 / 1 - / 1 2 / 1 2 4

Relay output - ○ ○ 2 - 4 - 4 ○ ○ ○ -

Analogue I/O - - - 2/- *** 1/- *** 2 / 2 - / - - 2 / 2 - - - -

Temperature input PT100 - - - - 1 - 1 - 1 - - - 1

Internal temperature measurement - ● ● ● ● ● ● ● ● ●

Min/Max memory - ● ● ● ● ● ● ● ● ●

Memory size - - 512 MB 512 MB 512 MB 512 MB 512 MB - 512 MB 512 MB

Clock - - ● ● ● ● ● - ● ●

EN 50160 - - ○ PQ S ○ PQ S ○ PQ S ● PQ A - - ○ PQ S ○ PQ S ○ PQ S

Residual current - - - ● - ● - ● - - ●

Communication

RS485 - - - ● - ● ● - ● ● ● - ● ● ● - - ● ●

Ethernet - - - - ● - ● ● ● ● ● ● ● - - ● - ● ●

USB - - - - - ● ● ● ● ● ● ● - - - - ● - ●

Web servers - - - - ● - ● ● ● ● ● ● ● - - ● - ● ●

M bus - - ● - - - - - - - - - ○ - ● - - - -

Logs

Modbus RTU - - - ● - ● ● - ● ● ● ● ● ● - - ● ●

Modbus TCP - - - - ● - ● ● ● ● ● ● ● - - ● - ● ●

Gateway modbus master - - - - - - ● - ● ● ● - ● - - - - - ● ●

Mechanical attributes

Display LED LCD Colour LCD Colour LCD LCD Colour LCD - - Colour LCD -

Dimensions (mm) 96×96×80 96×96×80 96×96×80 96×96×80 144×144×80 144×144×80 106×90×58 106×90×58 106×90×58 106×90×58

Assembly Front Front Front Front Front Front DIN35 DIN35 DIN35 DIN35


General information

UMD 709UMD 710 CMD 68MID

MMD 97 MMD 710 UMC 26 BLK controllerA EVU Transformer Direct

5-1470 VLL 5-1470 VLL 230 V / 400 V 8-865 VLL 5-1470 VLL 20-1090 VLL

65-275 VAC 75-350 VDC

65-275 VAC 75-350 VDC

24 VDC 230 V / 400 V 100-500 VAC 65-275 VAC75-500 VAC 90-600 VDC

300 V / CAT III CAT III CAT IV 300 V / CAT III 300 V / CAT III 300 V / CAT III 300 V / CAT III

3U, 4I, 1Ircm 3U, 4I, 1Ircm 3U, 3I 3U, 3I 3U, 3I 3U, 4I, 1Ircm 3U, 3I

5 A;1 A 5 A;1 A 5 A;1 A 100 A 333 mV (Rogowski) 100 mV (Rogowski) 5 A;1 A

40-70 Hz 40-70 Hz 45-60 Hz 40-70 Hz 40-70 Hz 40-70 Hz

4 4 4 4 4 4

28.8 kHz 28.8 kHz 25,6 kHz 28.8 kHz 6.4 kHz

200 ms 200 ms 200 ms 200 ms 200 ms

● ● ● ● ● ●

1 - 128 1 - 128 - 1 - 50 1 - 128 1 - 50

○ PQ S ● - ● ● ○ PQ S

● ● - ● ● ●

● ● - ● ● ●

● ● - ● ● ●

○ PQ S ● - ● ● ○ PQ S

○ PQ S ● - ● ● ○ PQ S

○ GO ● - ● ● ○ GO

0.05 0.05 0.5 0.2 0.05 0.2

0.2s 0.2s 1 0.5s 0.2s 0.5s

4 4 - / 2 - 4 -

- - - - - 7, 9, 16, 18

- - - - - -

1 1 - - 1 1

● ● - ● - ●

● ● - ● - ○

512 MB 512 MB - 512 MB 512 MB ○ 512 MB

● ● - ● ● ●

○ PQ S ● PQ A - ● PQ S ● PQ A ○ PQ S

● ● - - ● -

● ● ○ - ● ○

● ● - ● ● ○

● ● - ● ● ○

● ● - ● ● ○

- - ○ - - -

● ● ○ ● ● ○

● ● - ● ● ○

● ● - - - ○

Colour LCD Colour LCD LCD Colour LCD Colour LCD LCD

106×90×58 106×90×58 70×92×63 166×209×90 295×345×150 144×144×80

DIN35 DIN35 DIN35 Mobile Mobile Front

7PQ PLUS Produktkatalog 2019

Notizen

Hard

ware

com

pone

nts

- m

easu

ring

equi

pmen

t



UMD 95 – Measuring equipment for installation in a control board

UMD 95 The UMD 95 is a low-cost measurement device for installation on the front board and replaces all analogue measurement devices. It measures 3-phase current and voltage in class 0.2 and all common network sizes, e.g. active power and reactive power, cos phi, harmonics and frequency. It is connected via transformers with N/5 A and N/1 A. It has a large, easy to read LED display. It is easy to operate via 2 function keys and an LED strip.

ApplicationThe device replaces all analogue measurement devices and is used in low-voltage main distribution and sub-distribution systems.

Standard

Supply voltageMeasu- rement voltage

Functions Communication

Type

Item

num

ber

85 -

275

V A

C

80 -

350

V D

C

20 -

50 V

AC

20

- 75

V D

C

8 - 6

20 V

LL

Dig

ital

inpu

ts

Dig

ital

outp

uts

Mem

ory

size

in M

B

Clo

ck

RS

485

Eth

erne

t

Mod

bus

mas

ter

M b

us

US

B

● - ● - - - - - - - - - UMD 95 10.12.1000

- ● ● - - - - - - - - - UMD 95 10.12.3000

ausschreiben.de




Technical specifications – UMD 95

Measurement

Voltage (ULL; ULN) U1; U2; U3, UN, U12; U23; U31 Cl. 0.2

Current IL1; IL2; IL3 Cl. 0.2

Power Active/reactive power import per phase L1; L2; L3;

Active power P1; P2; P3; 3P import; total Cl. 0.5

Reactive power Q1, Q2, Q3; 3Q Cl. 1

Apparent power S1; S2 ; S3; 3S Cl. 1

Power factor; cos phi PF1, PF2, PF3; PFN, PF, cos phi1, cos phi2, cos phi3 Cl. 0.5

Symmetry yes

Harmonic voltage THDU1; THDU2; THDU3; THDU12; THDU23; THDU31 Cl. 2

Harmonic current THDI1; THDI2; THDI3; Cl. 2

Frequency 40-70 Hz Cl. 0.1

Active energy no

Reactive energy no

Flickers no

Data logger

Memory (flash) no

Energy no

Voltage dips no

Oscillogram function no

Additional functions

Alarms no

I/O no

Memory no

Recording interval no

Electrical connection

Supply voltage U:85-275 V AC / 80-350 V DC

U:20-50 V AC / 20-75 V DC

Power input 3 VA/3 W

Overvoltage category CAT III/300 V

Measurement ranges

Rated voltage 8-620 V AC (400 V)

Overload 1.2 kV LN/1s

Impedance 2.7 MOhm

Input signal X/1//5 A

Overcurrent 1.2x In (max. 70 A/1s)

Sampling rate 3.2 kHz

PQ evaluation no

Ambient conditions

Operating temperature range T:-25°C-60°C

Bearing temperature range T:-40°C-85°C

Electromagnetic compatibility

Radiation EN 61000-4-2...-3...-4...-5...-6...-11

Irradiation EN 55011 Cl. A, EN 55022 Cl. A

Protection class

Front IP40; opt. IP54

Rear IP20

Dimensions WxHxD (mm) 96x96x80



96

96 92

59

L1

L2

L3

N

PE

k l

k l

k l

Typical connection variant – UMD 95

Dimensional drawings – UMD 95




UMD 96 The UMD 96 is a powerful measurement device for installation on the front board* and replaces all analogue measurement devices. It measures 3-phase current and voltage in 4-quadrant mode in class 0.2 and therefore the energy in class 0.5s, as well as all common network sizes such as harmonics up to the 50th harmonic. It can be measured via transformers with N/5 A and N/1 A, as well as via Rogowski coils (333 mV). It has an illuminated, large and easy to read digital display. It is easy to operate via 4 function keys. A PT100 is integrated internally. It is used in both 400 V networks and 690 V networks. The UMD 96 can also be equipped with an optional Ethernet interface and a web server. PLC systems and building management systems can therefore be connected easily. Digital inputs/outputs and a serial RS485 interface with Modbus are available. The ENVIS software is used to set parameters for the device and to visualise it.

* also suitable for top hat rail installation with adapter

ApplicationThe device is used to measure consumption in low-voltage main distribution and sub-distribution systems.

Standard Optional

ausschreiben.de





Measurement



Power Active/reactive power import/export per phase L1; L2; L3; per tariff T1; T2; T3

Active power P1; P2; P3; 3P import; export, total Cl. 0.5


Apparent power S1; S2; S3; 3S Cl. 1

Harmonic distortion power D1; D2; D3;


Symmetry yes



Harmonic per arrangement 1st to 50th for U/I

Distortion factor U1fh; U2fh; U3fh; I1fh; I2fh; I3fh;


Active energy 4-quadrant measurement import/ export per phase; per tariff; total Cl. 0.5s

Reactive energy 4-quadrant measurement import/ export per phase; per tariff; total Cl. 2

Flickers no

Data logger

Memory (flash) no

Energy no

Voltage dips no



Alarms Logic; limit values for exceeding/falling short

I/O 1 digital input / 2 outputs; 60 V AC / 100 V DC, 100 mA

Memory no

Recording interval no

Communication RS485 Modbus; Ethernet 100 MBit/s



U:20-50 V AC / 20-75 V DC

Power input 3V A/3 W


Measurement ranges

Rated voltage 8-620 V AC (400 V); opt. 20-865 V (690 V)


Impedance 2.7 MOhm

Input signal X/1//5 A; opt.: 100 mA; 333 mV



PQ evaluation no

Ambient conditions




Radiation EN 61000-4-2...-3...-4...-5...-6...-11


Protection class


Rear IP20




* preferred types (short delivery times)

Supply voltage Measurement voltage Functions Communication

Type

Item

num

ber

85 -

275

V A

C

80 -

350

V D

C

20 -

50 V

AC

20

- 75

V D

C

8 - 6

20 V

LL

20 -

865

V L

L

Dig

ital

inpu

ts

Dig

ital

outp

uts

Mem

ory

size

in M

B

Clo

ck

RS

485

Eth

erne

t

Mod

bus

mas

ter

M b

us

US

B

● - ● - 1 2 - - - - - - - UMD 96* 10.05.1000

● - - ● 1 2 - - - - - - - UMD 96 10.05.2000

- ● ● - 1 2 - - - - - - - UMD 96 10.05.3000

- ● - ● 1 2 - - - - - - - UMD 96 10.05.4000

● - ● - 1 2 - - ● - - - - UMD 96S* 10.05.1001

● - - ● 1 2 - - ● - - - - UMD 96S 10.05.2001

- ● ● - 1 2 - - ● - - - - UMD 96S 10.05.3001

- ● - ● 1 2 - - ● - - - - UMD 96S 10.05.4001

● - ● - 1 2 - - - ● - - - UMD 96EL* 10.05.1002

● - - ● 1 2 - - - ● - - - UMD 96EL 10.05.2002

- ● ● - 1 2 - - - ● - - - UMD 96EL 10.05.3002

- ● - ● 1 2 - - - ● - - - UMD 96EL 10.05.4002

● - ● - 1 2 - - - - - ● - UMD 96M 10.05.1013

● - - ● 1 2 - - - - - ● - UMD 96M 10.05.2013

- ● ● - 1 2 - - - - - ● - UMD 96M 10.05.3013

- ● - ● 1 2 - - - - - ● - UMD 96M 10.05.4013

Variant with 333 mV direct connection

● - ● - 1 2 - - ● - - - - UMD 96S 10.05.9001

Accessories Order no.

AH9697 top hat rail adapter 81.00.9697

IP65 protective hood 37.00.9600



96

96 92

80

L1

L2

L3

N

PE

k l

k l

k l

L1

L2

L3

k l

k l

k l

MV/LVTransformer

L1

L2

L3

N

PE






UMD 97 The UMD 97 is a powerful measurement device for installation on the front board* and replaces all analogue measurement devices. It measures 3-phase current and voltage in 4-quadrant mode in class 0.2 and therefore the energy in class 0.5s, as well as all common network sizes such as harmonics up to the 50th harmonic. It can be connected via transformers with N/5 A and N/1 A, as well as via Rogowski coils (333 mV). It maps the network quality according to EN 50160, EN 61000-2-2, EN 61000-2-4, EN 61000-2-12. It has a brilliant, large colour graphical display. The UMD 97 is easy to operate via 5 function keys. A PT100 is integrated internally. It can be used in both 400 V and 690 V networks, as well as in IT networks. It has a large 512 MB memory. The device can be accessed via the Ethernet interface and the mini USB connection on the front. This enables internet protocols to also be read in and PLC systems and building management systems to be connected easily. Digital inputs/outputs and a serial RS485 interface are also integrated. The PQ S and GO firmware modules can be added to extend the measurement device for network analysis. The ENVIS software is used to set parameters for the device and to visualise it.

* also suitable for top hat rail installation with adapter.

ApplicationThe device is used to measure network quality and consumption in low-voltage main distribution and sub-distribution systems.

Standard Optional

ausschreiben.de





Measurement









Symmetry yes





Frequency 40-70 Hz, 400 Hz as of ser. no. 2199 Cl. 0.05



Flickers Option: PQ S

Data logger

Memory (flash) ULN; ULL; I; P; Q; S; D; THDU; THDI; f; Ufh; I/O status

Energy Active/reactive power import/export per phase L1; L2; L3; per tariff T1; T2; T3

Voltage dips Option: PQ S

Oscillogram function Option: GO



I/O 1 digital input / 2 outputs; 60 V AC / 100 V DC, 100 mA; USB 2.0

Memory 512 MB flash

Recording interval sec; min; h; days; month; year

Communication RS485 Modbus max. 921600 baud; Ethernet 100 MBit/s



U:20-50 V AC / 20-75 V DC



Measurement ranges

Rated voltage 8-620 V AC (400 V); opt. 20-865 V (690 V)


Impedance 2.7 MOhm

Input signal X/1//5 A; opt.: 100 mA; 333 mV



PQ evaluation Option: EN 50160, EN 61000-2-2, EN 61000-2-4, EN 61000-2-12

Ambient conditions




Radiation EN 61000-4-2...-3...-4...-5...-6...-11


Protection class


Rear IP20




Supply voltage Measurement voltage Functions Communication

Type

Item

num

ber

100

- 275

V A

C

80 -

350

V D

C

20 -

50 V

AC

20

- 75

V D

C

8 - 6

20 V

LL

20 -

865

V L

L

Dig

ital i

nput

s

Dig

ital o

utpu

ts

Mem

ory

size

in M

B

Clo

ck

RS

485

Eth

erne

t

Mod

bus

mas

ter

M b

us

US

B

● - ● - 1 2 512 ● ● - - - ● UMD 97CBM* 11.06.1105

● - - ● 1 2 512 ● ● - - - ● UMD 97CBM 11.06.2105

- ● ● - 1 2 512 ● ● - - - ● UMD 97CBM 11.06.3105

- ● - ● 1 2 512 ● ● - - - ● UMD 97CBM 11.06.4105

● - ● - 1 2 512 ● - ● - - ● UMD 97EL* 11.06.1107

● - - ● 1 2 512 ● - ● - - ● UMD 97EL 11.06.2107

- ● ● - 1 2 512 ● - ● - - ● UMD 97EL 11.06.3107

- ● - ● 1 2 512 ● - ● - - ● UMD 97EL 11.06.4107

● - ● - 2 2 512 ● ● ● ● - ● UMD 97E* 11.06.1110

● - - ● 2 2 512 ● ● ● ● - ● UMD 97E 11.06.2110

- ● ● - 2 2 512 ● ● ● ● - ● UMD 97E 11.06.3110

- ● - ● 2 2 512 ● ● ● ● - ● UMD 97E 11.06.4110

Variant with 333 mV direct connection

● - ● - 1 2 512 ● - ● - - ● UMD 97EL 11.06.9107




USB 2.0 connection cable,Type A - mini B; 3.0m 18.21.2020




96

96 92

80

L1

L2

L3

k l

k l

k l

MV/LVTransformer

L1

L2

L3

N

PE

20...50 VAC20...75 VDC

L1

L2

L3

N

PE

k l

k l

k l

L1

L2

L3

N

PE

333 mV CURRENT SIGNAL INPUTS

GSPS 1IS GSPS 2IS GSPS 3IS





UMD 97EVU – Measuring equipment for CAT IV environments

UMD 97EVUThe UMD 97EVU is a powerful measurement device for installation on the front board* for CAT IV environments. It measures 3-phase current and voltage in 4-quadrant mode in class 0.2 and therefore the energy in class 0.5s, as well as all common network sizes such as harmonics up to the 50th harmonic. It can be connected via transformers with N/5 A and N/1 A. It maps the network quality according to EN 50160, EN 61000-2-2, EN 61000-2-4, EN 61000-2-12. It has a brilliant, large colour graphical display. The UMD 97 is easy to operate via 5 function keys. A PT100 is integrated internally. It has a large 512 MB memory. The device can be accessed via the Ethernet interface and the mini USB connection on the front. This enables internet protocols to also be used and PLC systems and building management systems to be connected easily. Digital inputs/outputs and a serial RS485 interface are also integrated. The PQ S and GO firmware modules can be added to extend the measurement device for network analysis. The ENVIS software is used to set parameters for the device and to visualise it.


ApplicationThe device is used in all CAT IV environments.A suitable CAT IV mains adapter is available in our accessories.

Standard Optional

ausschreiben.de

Supply voltage

Measurement voltage Functions Communication

Type

Item

num

ber

10 -

26 V

AC

10 -

30 V

DC

8 - 6

20 V

LL

Dig

ital

inpu

ts/o

utpu

ts

Rel

ay o

utpu

ts

Mem

ory

size

in M

B

Clo

ck

RS

485

Eth

erne

t

Mod

bus

mas

ter

M b

us

US

B

● ● 2 2 512 ● ● ● ● - ● UMD 97EVU 11.31.3110




Technical specifications – UMD 97EVU

Measurement









Symmetry yes





Frequency 40-70 Hz, 400 Hz as of ser. no. 2199 Cl. 0.05




Data logger







I/O 2 digital inputs/outputs; 2 relay outputs

Memory 512 MB flash






Overvoltage category CAT IV/300 V

Measurementranges

Rated voltage 11-520 V AC


Impedance 2.7 MOhm





Ambient conditions




Radiation EN 61000-4-2...-3...-4...-5...-6...-11


Protection class


Rear IP20




Typical connection variant – UMD 97EVU

CAT IVPOWER COMPACT




UMD 98 The UMD 98 is an extremely powerful measurement device for installation on the front board* and replaces all analogue measurement devices. It measures 3/4-phase current and voltage in 4-quadrant mode in class 0.2 and therefore the energy in class 0.5s, as well as all common network sizes such as harmonics up to the 50th harmonic. The device is connected via transformers with N/5 A and N/1 A. It maps the network quality according to EN 50160, EN 61000-2-2, EN 61000-2-4, EN 61000-2-12. It has a brilliant, large colour graphical display. The UMD 98 is easy to operate via 5 function keys. It has two analogue inputs for RCM. It can be used in 230/400 V TN-S networks. It has a large 512 MB memory and an integrated web server. The device can be accessed via the Ethernet interface (with 5 ports) and the mini USB connection on the front. This enables internet protocols to also be read in and PLC systems and building management systems to be connected easily. Digital inputs/outputs and a serial RS485 interface are also integrated. The PQ S and GO firmware modules can be added to extend the measurement device for network analysis. The ENVIS software is used to set parameters for the device and to visualise it. The CPU works at 25.6 kHz.


ApplicationThe device is used to measure network quality and consumption in low-voltage main distribution and sub-distribution systems. The RCM inputs can be used for residual current measurements. Particularly suitable for building automation, computing centres and hospitals.

Standard Optional

ausschreiben.de





Measurement


Current IL1; IL2; IL3; IN; 2xRCM Cl. 0.2







Symmetry yes









Data logger







I/O 1 digital input/output

Memory 512 MB flash


Communication RS485 Modbus max. 921600 baud; Ethernet 100 MBit/s; USB


Supply voltage U: 110-250 V AC

Power input 8 VA / 4 W


Measurement ranges

Rated voltage 8-660 V AC (400 V); optional 20-865 V (690)


Impedance 3.6 MOhm

Input signal x/1//5A




Ambient conditions




Radiation EN 61000-4-2...-3...-4...-5...-6...-11


Protection class


Rear IP20




Supply voltage Measurement voltage

Residual current

measure-ment


Type

Item

num

ber

100

- 275

V A

C

80 -

350

V D

C

20 -

50 V

AC

20

- 75

V D

C

20-6

60 V

LL

8 - 8

65 V

LL

Num

ber

Dig

ital

inpu

ts/o

utpu

ts

Mem

ory

size

in M

B

Clo

ck

PT

100

inpu

t

RS

485

Eth

erne

t

Mod

bus

mas

ter

US

B

● - ● - 2 1 512 ● - ● ● ● ● UMD 98RCM 11.29.1110

● - - ● 2 1 512 ● - ● ● ● ● UMD 98RCM 11.29.2110

● - ● - 1 1 512 ● ● ● ● ● ● UMD 98RCM-T 11.29.1125



USB 2.0 connection cable,Type A - mini B; 3.0m 18.21.2020




96

96 92

80

ETHCOM1

A+ B- G13 23 33

L1

L2

L3

N

PE

I11 I12 I21 I22 I31 I32 I41 I427 8

DI/O RCM (IΔ)D1

34 44 54 6414 24C1 I51 I52 I53 I54

S1

S2

S1 S2

S1 S2

S1 S2

1A






UMD 807The UMD 807 is an integrated network quality measurement device for installation on the front board 144x144. It measures 3-phase current and voltage with up to 3 tariffs in 4-quadrant mode in class 0.2 and therefore the energy in class 0.5, as well as all common network sizes such as harmonics up to the 50th harmonic. It can be used in both 400 V and 690 V networks, as well as in IT networks. It can be connected via transformers with N/5 A and N/1 A, as well as via Rogowski coils (333 mV). It maps the network quality according to EN 50160, EN 61000-2-2, EN 61000-2-4, EN 61000-2-12. It has a large 512 MB memory. The device can be accessed via the Ethernet interface and the USB connection on the front. This enables internet protocols to also be read in and PLC systems and building management systems to be connected easily. Analogue and digital inputs/outputs, an RS485 interface and an operating hours counter are all integrated.

The sampling frequency is 6.4 kHz. The ENVIS software is used to set parameters for the device and to visualise it.

The PQ S module is available as an optional firmware module to evaluate the voltage quality in accordance with EN 50160. The GO firmware module is used to activate oscilloscope functions for current and voltage, and to set trigger signals for limit value events. The optional RCS module supports ripple control signal detection. Application

The device is used to monitor the voltage quality in main distribution systems and transformer stations continuously.

Standard Optional

Supply voltage


Type

Item

num

ber

75 -

500

V A

C

90 -

600

V D

C

20 -

1090

V L

L

Dig

ital i

nput

s

Dig

ital o

utpu

ts

Rel

ay o

utpu

t

Ana

logu

e in

puts

Ana

logu

e ou

tput

s

Mem

ory

size

in M

B

Clo

ck

PT1

00 in

put

RS

485

Eth

erne

t

Mod

bus

mas

ter

M b

us

US

B

● ● 5 4 4 2 2 512 ● - ● ● ● - ● UMD 807E* 11.07.1110

● ● 5 4 4 - - 512 ● ● - ● - - ● UMD 807EL* 11.07.1107


ausschreiben.de





Measurement




Active power P1; P2; P3; 3P import; export Cl. 0.5


Apparent power S1; S2 ; S3; 3S Cl. 0.5

Harmonic distortion power D1; D2; D3

Power factor; cos phi PF1, PF2, PF3; PF, cos phi1, cos phi2, cos phi3 Cl. 0.5

Symmetry yes


Harmonic current THDI1; THDI2; THDI3 Cl. 2


Distortion factor U1fh; U2fh; U3fh; I1fh; I2fh; I3fh




Data loggerMemory (flash) ULN; ULL; I; P; Q; S; D; THDU; THDI; f; Ufh; I/O status


Firmware options


EN 50160 network quality Option: PQ S

Ripple control signal detection Option: RCS

Gateway ModbusMaster option



Digital I/O 4 inputs / 4 outputs; 4 relay outputs 60 V AC / 100 V DC, 100 mA;

Analogue I/O 2 inputs / 2 outputs; 1x PT100

Memory 512 MB flash


Communication RS485 Modbus; Ethernet 100 MBit/s; USB 2.0





Measurement ranges

Rated voltage 20-1090 V (690 V)


Impedance 3.9 MOhm

Input signal X/1//5 A; opt.: 100 mA



Ambient conditions

Operating temperature range T:-25°C - 60°C

Bearing temperature range T:-40°C - 80°C


Radiation EN 61000-4-2…-3…-4…-5…-6…-11


Protection class


Rear IP20

Dimensions WxHxD (mm) 144 x 144 x 80





L1

L2

L3

N

PE

k l

k l

k l

MV/LVTransformer

L1

L2

L3

k l

k l

k l

59

136

144

144




UMD 913 energy quality measurement systems with integrated disturbance recorder for professional network analysisThe UMD 913 is a high-performance, multi-functional, high-precision measuring instrument for installation on the front board. It is certified as class A. It measures 4-phase current and voltage in 4-quadrant mode, in class 0.05 and therefore the energy in class 0.2s.

Regardless of the processes the run in the energy systems, the UMD 913 network analysers register even the smallest disturbances or changes. All electrical energy supply parameters are recorded consistently and precisely. Detailed quality evaluations make even the smallest deviations visible and provide information on the causes of the disturbances. The exact time synchronisation of the measurement systems via GPS or NTP enables measured data to be consolidated for comprehensive monitoring of the entire supply network. UMD systems capture all network parameters permanently to analyse and document the network quality according to self-defined or international standards such as EN 50160, EN 61000-2-2, EN 61000-2-4 or EN 61000-2-12. High memory capacities and effective compression methods enable long-term recordings of up to several years.

In addition to continuously recording all sizes relevant for network quality, the integrated disturbance recording module enables event-triggered recording of transient processes with sampling rates of up to 28.8 kHz. It is used individually or comprehensively in a group at the key points on all voltage levels. The measured values are monitored comprehensively, consistently and fully automatically.

Even reliable under extreme conditionsAll analogue and binary inputs and outputs, as well as all interfaces are galvanically separated and guarantee high safety with regard to working and operator safety. The outstanding immunity to electromagnetic interference is a guarantee of fault-free operation even under extreme circumstances.

Analogue inputsUMD 913 is equipped with 2 optional analogue input channels for PT100. Additional monitoring functions can be performed via 2 RCM residual current inputs.

Analogue outputsIt has 2 analogue outputs as standard (4-20 mA/0-10 V)

Standard Optional

ausschreiben.de





Measurement


Current IL1; IL2; IL3; ILN; 2 IRCM Cl. 0.05

Power Active/reactive power import/export per phase L1; L2; L3

Active power P1; P2; P3; PN; 3P import; export Cl. 0.1

Reactive power Q1, Q2, Q3; QN; 3Q Cl. 1

Apparent power S1; S2 ; S3; SN; 3S Cl. 0.2

Harmonic distortion power D1; D2; D3; DN


Symmetry yes

Harmonic voltage THDU1; THDU2; THDU3; THDUN; THDU12; THDU23; THDU31 Cl. 1

Harmonic current THDI1; THDI2; THDI3; THDIN Cl. 1


Distortion factor U1fh; U2fh; U3fh; Unfh; I1fh; I2fh; I3fh; Infh

Frequency DC...15 kHz; AC: 10 Hz-15 kHz Cl. 0.02

Active energy 4-quadrant measurement import/ export per phase; total Cl. 0.2s

Reactive energy 4-quadrant measurement import/ export per phase; total Cl. 2

Flickers yes

Data logger


Energy Active/reactive power import/export per phase L1; L2; L3




Alarms Logic; limit values for over/under- U; -I; P; Q; S; unequally allocated ;THD; cos phi; f

I/O 4 digital inputs / 8 digital outputs; 2 analogue inputs/ 2 analogue outputs; 4 relays 2 A AC

Memory 512 MB


Communication RS485 Modbus; Ethernet 100 MBit/s; USB -A


Supply voltage U: 85 ÷ 265 V AC/ 90 ÷ 350 V DC

Power input 5 VA


Measurement ranges

Rated voltage 690 V AC

Overload 760 V AC

Impedance 6.6 MOhm

Rated current 5 A

Overcurrent 100 A AC for max 1 s


PQ evaluation EN 50160, EN 61000-2-2, EN 61000-2-4, EN 61000-2-12

Ambient conditions

Operating temperature range T:-5°C-50°C at 5-95% relative air humidity



Radiation EN 61000-6-4

Irradiation EN 61000-6-2

Protection class Front IP52

Dimensions/weight WxHxD (mm) 144x144x140



Time synchronisation

Internal real-time clock yes

NTP/SNTP yes

GPS receiver External GPS receiver

Pulse input for second or minute pulses

TTL pulse input (5 V), min. pulse width 5 ms 5 ÷ 24 V pulse input, min. pulse width 5 ms

Supply voltage

Measu- rement voltage

Residual current measurement


Type

Item

num

ber

85 -

265

V A

C

90 -

350

V D

C

5 - 1

470

V L

L

Num

ber

Dig

ital I

/O

Rel

ay o

utpu

t

Ana

logu

e I/O

Tem

pera

ture

inpu

t

Mem

ory

size

in M

B

Clo

ck

RS

485

Eth

erne

t

US

B

● ● 2 4 - - - 512 ● ● ● ● UMD 913* 12.08.1109

● ● 2 4+1 4 2/2 1 512 ● ● ● ● UMD 913G 12.52.1109



Communication

Communication interfacesThe UMD 913 measurement system provides the following interfaces for integration into communication networks:• Ethernet• USB• RS485• Integrated web server

Data communication via UMTS routerDue to the increase in use of regenerative energies, network analysers are used more and more in systems without cabled communication connections. As an alternative to downloading the data using a USB stick, an automatic data download via the mobile phone network, e.g. via a UMTS/GPS router, is recommended. This makes communication and data transfer completely independent of any cabled infrastructure. Furthermore, there is the possibility of achieving a high data transfer rate (up to 100 Mbit/s) when downloading the measurement data even in rural regions and small towns. The UMTS router that is installed close to the network analysers establishes an internet connection and the data can be transferred securely and without problems to a central server (database) via a VPN tunnel.

MemoryMeasured data can be transferred quickly and easily to a PC. The flash memory guaranteed completely secure recordings. No measured data is lost even if the supply is interrupted.

Time synchronisationThe prerequisite for comprehensive energy quality and fault analysis is precise time synchronisation. Measured sizes from different systems can only be compared and analysed if they are recorded at the exact same time. UMD 913 covers all common time synchronisation methods.

Energy meterThe integrated energy meter with a precision class of 0.2S can be used to monitor the energy consumption in systems and trend analyses over extended periods can be used to optimise them. The active, reactive and apparent power can be recorded and analysed highly accurately.

External UPSThere is the option of using an external mini UPS in order to provide a comprehensive safeguard of an uninterruptible power supply. The complete top hat rail module is easy to install and supports the system even in the event of extended downtimes.

Energy quality recordingContinuous recording of all network parameters enables comprehensive energy quality analyses in accordance with DIN EN 50160 or individually definable quality criteria. Parameters are recorded and calculated in accordance with IEC 61000-4-30 class A, IEC 61000-4-7 and IEC 61000-4-15. Quality certificates are easy to generate at any time without special knowledge thanks to automatic evaluation and creation of quality reports as PDF files.

Continuous data recordingThe data logger function records measured data continuously. The recorded data can be transferred to a central computer without having to interrupt the measurement. Continuous measurements over many years are therefore possible. The measurement intervals can be adjusted individually. The average value over the specified time, the largest and the smallest actual value are recorded with an exact time stamp for each measurement interval.

Event recordingEvent recording provides information about the time, height and duration of limit value violations, and a classification of the events, e.g. according to EN 50160. If required, the event signatures can also be recorded with a time resolutions of half of the period duration. All analogue and binary signals are recorded if limit values are violated. Recording comprises time windows for the pre-event, error event and post-event, which can be adjusted separately. The error recording duration can therefore be fixed or controlled by the actual event duration.

Recording digital events and statusesBinary inputs are mainly used to read in messages, e.g. from the protective relay, switch positions or machine statuses, which have a significant meaning for analysing disturbance recordings. Furthermore, the binary inputs can be used to trigger disturbance records in order to obtain a high resolution recording of the network status at the moment of switching.

Evaluation

Network quality analysis using ENVIS evaluation softwareNetwork and energy quality analyses can be performed automatically in accordance with standards (e.g. EN 50160); there are numerous analysis tools available to the user for this.



Event recording with signature display

• Flicker analysis• Harmonic analysis• Analysis of interharmonics• Event classification and evaluation• Graphical display of the extreme values• Tabular overview of limit value violations• User-defined limit value and analysis settings• Automatic generation of weekly, monthly, quarterly

and annual reports• Calculation and signal display of residual current

measurements• Convenient zoom function and variable scaling• Superimposition of various signal sequences

Evaluating disturbance recordingsThe software also contains a comprehensive collection of powerful analysis tools to evaluate the disturbance recordings:• Vector displays• Harmonic analysis • User-defined absolute and delta measurement cursor• Convenient zoom function and variable scaling• Simultaneous display, superimposition and synchronisation

of several disturbance recordings• Individual reporting via clipboard• Automatic report creation

Import / exportData formats for import and export functions enable data exchange between different systems vis standardised PQDIF, COMTRADE, CSV and XML (Nequal) file formats.

ApplicationThe device is used in power plants, substations, transformer stations and low-voltage main distribution systems to monitor electrical sizes.



UMD 701 – Measuring equipment for the top hat rail

UMD 701 / UMD 701RCMThe UMD 701 is a compact network quality measurement device with data logger for installation on the DIN top hat rail. It measures 8-channel AC/DC current and voltage, the energy in class 0.2s and the harmonics up to the 50th harmonic. It optionally maps the network quality according to EN 50160, EN 61000-2-2, EN 61000-2-4, EN 61000-2-12. The UMD 701 has a large 512 MB memory. The device can be accessed via the Ethernet interface and live measured values can be observed using the web browser via the corresponding web server. This enables internet protocols to also be read in and PLC systems and building management systems to be connected easily. Digital inputs/outputs and a serial RS485 interface are integrated. Measurement is performed via JS or CTB transformers (100 mA). In the UMD 701RCM, the device is used as an 8-channel residual current measurement device. Measurement is performed via residual current transformers.

ApplicationThe device is used to monitor DC motors, PV systems and to measure residual current in computing centres and building automation.

Standard Optional


Supply voltage


Rated current



Type

Item

num

ber

85 -

275

V A

C80

- 35

0 V

DC

20 -

50 V

AC

20

- 75

V D

C

8 - 3

60 V

LN

100

mA

5 A

RC

M in

puts

Dig

ital i

nput

s

Dig

ital o

utpu

ts

Mem

ory

size

in M

B

Clo

ck

RS

485

Eth

erne

t

Mod

bus

mas

ter

M b

us

US

B

● - ● - - 8 2 1 512 ● ● ● - - - UMD 701RCM* 13.01.6004

● - - - ● - 2 1 512 ● ● ● - - - UMD 701 10.01.2104

● - - ● - 2 1 512 ● ● ● - - - UMD 701 10.01.2404

● - ● ● - - 2 1 512 ● ● ● - - - UMD 701* 10.01.6004

- ● ● ● - - 2 1 512 ● ● ● - - - UMD 701 10.01.8004

ausschreiben.de





Measurement

Voltage (ULL; ULN) U Cl. 0.2

Current IL1; IL2; IL3; IL4; IL5; IL6; IL7; IL8 Cl. 0.5


Active power P1; P2; P3; P4; P5; P6; P7; P8 Cl. 1

Reactive power Q1; Q2; Q3; Q4; Q5; Q6; Q7; Q8 Cl. 1

Apparent power S1; S2; S3; S4; S5; S6; S7; S8 Cl. 1

Harmonic distortion power D1; D2; D3; D4; D5; D6; D7; D8

Power factor; cos phi PF1-PF8; cos phi1-cos phi8 Cl. 0.5

Symmetry yes

Harmonic voltage THDU Cl. 2

Harmonic current THDI1-THDI8 Cl. 2


Distortion factor Ufh: I1fh-I8fh


Active energy Import/export per phase (E1-E8) per tariff; total Cl. 0.5

Reactive energy Ind./cap. per phase (E1-E8) per tariff; total ind./cap. Cl. 2

Flickers no

Data logger

Memory (flash) ULN; I; P; Q; S; D; THDU; THDI; f; Ufh; I/O status


Voltage dips no




I/O 2 digital inputs / 1 output; 60 V AC / 100 V DC, 300 mA;

Memory 512 MB flash





U:20-50 V AC / 20-75 V DC



Measurement ranges



Impedance 2.7 MOhm

Rated current x/100 mA , RCM

Overcurrent 1.2x In


PQ evaluation no

Ambient conditions




Radiation EN 61000-4-2...-3...-4...-5...-6...-11


Protection class IP20




L

N

L8

JSxxSH-xxx

T 0,5A

L7

L6

L5

L4

L3

L2

L1

JSxxH

S-xxx

JSxxH

S-xxx

JSxxH

S-xxx

JSxxH

S-xxx

JSxxH

S-xxx

JSxxH

S-xxx

JSxxH

S-xxx

JSxxH

S-xxx

N L +15 -15 I1 I2 I3 I4 I5 I6 I7 I8

X1 X2 O- O+ R A1 A2 G B A G B/1 A/2COM1 COM2 / DI

C

N

ETH

Electricity billing meter

JP3WJP3W JP3W

100/5A

100/5A

100/5A LOA

D

L1

L2

L3

N

PE

L

N

L

N

N L1 L2 L3 L4 l1 k1 l2 k2 l3 k3 l4 k4


ETH


Typical connection variant – UMD 701RCM

Kom

plet

tmes

sung

best

eht a

us:

ZEPN-BedN-Ist.DIFFPE

UMD 701RCM

UMD 709

ETH

N

PE

Zent

rale

r Erd

ungs

punk

t (ZE

P)

L1

L2

L3

L1 L2 L3

PE

ZEP

DIF

F

N-Is

t

Cen

tral e

arth

ing

poin

t (C

EP)

Com

plet

e m

easu

rem

ent

com

pris

ing:

DIF

F

N ac

tual

CEPN req.N actualDIFFPE



Accessories Item no.

5-pin connection terminal + fastening adapter

18.88.7015

60.6

90

21.5 10

45 62

58106

99.8

30.3

D500





UMD 704 The UMD 704 is a compact network quality measurement device for online measurements and for installation on the DIN top hat rail. It measures 4-phase current and voltage with up to 3 tariffs in 4-quadrant mode and the energy in class 0.2s, as well as all common network sizes such as harmonics up to the 50th harmonic. Digital inputs/outputs and a serial RS485 interface are integrated. The UMD 704 can also be equipped with an M bus interface. We recommend the 100 mA variant of JS or CTB transformers here.

ApplicationThe device is used to continuously monitor the network quality in computing centres and in building automation, as well as consumption recording for ISO 50001.

Standard Optional



Rated current Functions Communication

Type

Item

num

ber

75 -

510

V A

C80

- 35

0 V

DC

20 -

50 V

AC

20

- 75

V D

C

11 -

520

V L

L

100

mA

Dig

ital i

nput

s

Dig

ital o

utpu

ts

Mem

ory

size

in M

B

Clo

ck

RS

485

Eth

erne

t

Mod

bus

mas

ter

M b

us

US

B

● - ● ● 2 1 - - ● - - - - UMD 704* 10.02.5001

- ● ● ● 2 1 - - ● - - - - UMD 704 10.02.7001

● - ● ● - 1 - - - - - ● - UMD 704M* 10.02.5006

- ● ● ● - 1 - - - - - ● - UMD 704M 10.02.7006

● - ● ● 2 1 - - - ● - - - UMD 704EL* 10.02.5004

- ● ● ● 2 1 - - - ● - - - UMD 704EL 10.02.7004

ausschreiben.de





Measurement


Current IL1; IL2; IL3; ILN Cl. 0.5


Active power P1; P2; P3; PN; 3P import; export Cl. 1


Apparent power S1; S2 ; S3; SN; 3S Cl. 1



Symmetry yes






Active energy 4-quadrant measurement import/ export per phase; per tariff; total Cl. 0.5


Flickers no

Data logger

Memory (flash) no

Energy no

Voltage dips no




I/O 2 digital inputs / 1 output, 60 V AC / 100 V DC, 300 mA

Memory no


Communication RS485 Modbus; Ethernet 100 MBit/s; M bus



U:20-50 V AC / 20-75 V DC



Measurement ranges



Impedance 2.7 MOhm

Input signal x/100 mA



PQ evaluation no

Ambient conditions




Radiation EN 61000-4-2...-3...-4...-5...-6...-11



Dimensions WxHxD (mm) 105X90X58





Modbus gateway – UMD 704 (slave)

L1

L2

L3

N

PE

L

N

N L1 L2 L3 L4 l1 k1 l2 k2 l3 k3 l4 k4


Electricity billing meter

JP3WJP3W JP3W

100/5A

100/5A

100/5A LOA

D

L1

L2

L3

N

PE

L

N

N L1 L2 L3 L4 l1 k1 l2 k2 l3 k3 l4 k4


ETH

ETH

60.6

90

21.5 10

45 62

58106

99.8

30.3

D500

ETH

N L1 L2 L3 L4 l1 k1 l2 k2 l3 k3 l4 k4


MODBUS RTU

ETHERNET

3rd partyModbusDevice


N L1 L2 L3 L4 l1 k1 l2 k2 l3 k3 l4 k4


ETH




UMD 705 The UMD 705 is a compact network quality measurement device with data logger for installation on the DIN top hat rail. It measures 3-phase current and voltage with up to 3 tariffs in 4-quadrant mode and the energy in class 0.2s, as well as all common network sizes such as harmonics up to the 50th harmonic. It optionally maps the network quality according to EN 50160, EN 61000-2-2, EN 61000-2-4, EN 61000-2-12 using the PQ S firmware module. It has a large 512 MB memory. The device can be accessed via the Ethernet interface and live measured values can be observed using the web browser via the corresponding web server. This enables internet protocols to also be read in and PLC systems and building management systems to be connected easily. Digital inputs/outputs and a serial RS485 interface are integrated. The UMD 705 can also be used as a modbus master to connect up to 31 modbus slaves in network structures. The optional GO firmware module is used to activate oscilloscope functions for current and voltage, and to set trigger signals for limit value events.


Standard Optional

ApplicationThe device is used in building automation to monitor the infrastructure.



Type

Item

num

ber

85 -

510

V A

C85

- 35

0 V

DC

20 -

50 V

AC

20

- 75

V D

C

7 - 7

20 V

LL

Dig

ital

inpu

ts/o

utpu

ts

Mem

ory

size

in M

B

Clo

ck

RS

485

Eth

erne

t

Mod

bus

mas

ter

US

B

● - ● 2 512 ● ● - - ● UMD 705CBM* 11.17.1105

- ● ● - 512 ● ● - - ● UMD 705CBM 11.17.3105

● - ● 2 512 ● ● ● ● - UMD 705E* 11.17.1104

- ● ● - 512 ● ● ● ● - UMD 705E 11.17.3104

ausschreiben.de





Measurement

Voltage (ULL; ULN) U1; U2; U3, U12; U23; U31 Cl. 0.2



Active power P1; P2; P3; 3P import; export Cl. 1




Power factor; cos phi PF1,PF2,PF3, PF, cos phi1,cos phi2, cos phi3 Cl. 0.5

Symmetry yes









Data logger







I/O 2 DIOs; 60 V AC / 100 V DC, 300 mA;

Memory 512 MB flash


Communication RS485 Modbus; Ethernet 100 MBit/s; opt. USB, M bus



U:20-50 V AC / 20-75 V DC



Measurement ranges



Impedance 2.7 MOhm





Ambient conditions




Radiation EN 61000-4-2...-4...-5...-6...-11


Protection class Rear IP20






Modbus master firmware – UMD 705

20V ÷ 75 V DC24V ÷ 48 V AC

MV/LVTransformer

L1

L2

L3

N L1 L2 L3

X1 X2 RA

I12 I11 I22 I21 I32 I31

C1 D1 C2 D2 G B- A+U

N L1 L2 L3

X1 X2 RA

I12 I11 I22 I21 I32 I31


ETH ETH

60.6

90

21.5 10

45 62

58106

99.8

30.3

D500

5

ETH

N L1 L2 L3

X1 X2 RA

I12 I11 I22 I21 I32 I31


ETH

MODBUS RTU

ETHERNET



N L1 L2 L3 L4 l1 k1 l2 k2 l3 k3 l4 k4




Standard

UMD 707RCMThe UMD 707RCM is a compact, high-end residual current measurement device for installation on the DIN top hat rail. It measures 5-channel residual currents (type A) and the voltage quality (harmonics up to the 128th harmonic; voltage dips 40 µsec).

Measurement is performed via the RCM-CT residual current transformer.The device has a large 512 MB memory. The device can be accessed via the Ethernet interface and live measured values can be observed using the web browser via the corresponding web server. Therefore, internet protocols such as NTP can also be read in.

PLC systems and building management systems can be connected easily via modbus TCP. Digital inputs/outputs and a serial RS485 interface are integrated. The GO firmware module is used to activate oscilloscope functions for voltage, and to set trigger signals for limit value events. A PT100 input is also provided.

UMD 707RCM – Measuring equipment for the top hat rail

ApplicationThe device is used to measure residual currents in outgoing lines/sub-distribution systems. Therefore continuous monitoring in accordance with VDE 0105-100/A1 can be established, resulting in measuring the insulation resistance according to DGUV V3 being redundant.

ausschreiben.de

Supply voltage




Type

Item

num

ber

65 -

275

V A

C

75 -

350

V D

C

5 - 1

470

V L

L

Num

ber

Dig

ital

inpu

ts/o

utpu

ts

Mem

ory

size

in M

B

Clo

ck

PT1

00 in

put

RS

485

Eth

erne

t

Mod

bus

mas

ter

US

B

● ● 5 4 512 ● ● ● ● ● ● UMD 707RCM 13.25.1104




Technical specifications – UMD 707RCM

Measurement


Current Idiff Cl. 0.05







Symmetry yes








Flickers P st; P it Cl. 2

Data logger







Digital I/O 4 digital inputs/outputs; 100 V AC/DC, 100 mA;

Analogue I/O 1x PT100

Memory 512 MB flash


Communication RS485 Modbus; Ethernet 100 MBit/s; USB


Supply voltage U:85-275 V AC

U:20-50 V AC / 20-75 V DC



Measurement ranges

Measurement voltage 5-1470 V AC

Overload 2.21 kV LN/1s 1300 V AC U//N continuous

Impedance 3.9 MOhm

Input signal X/1//5 A; RCM

Overcurrent 3x In (max. 70 A/1s)


Ambient conditions




Radiation EN 61000-4-2...-3...-4...-5...-6...-11






Standard

UMD 707DCThe UMD 707DC is a compact, high-end direct current measurement device for installation on the DIN top hat rail. It measures 5-channel direct currents and the voltage quality (harmonics up to the 128th harmonic; voltage dips 40 µsec).

Measurement is performed via the JS transformer (hall effect). The device has a large 512 MB memory. The device can be accessed via the Ethernet interface and live measured values can be observed using the web browser via the corresponding web server. Therefore, internet protocols such as NTP can also be read in.

PLC systems and building management systems can be connected easily via modbus TCP. Digital inputs/outputs and a serial RS485 interface are integrated. The GO firmware module is used to activate oscilloscope functions for voltage, and to set trigger signals for limit value events. A PT100 input is also provided.

A special mains adapter (15V) is required to supply the JS transformer (hall effect). The DC Power Compact6 mains adapter is supplied as standard with the UMD 707DC.

ApplicationThe device is used to measure direct currents.

UMD 707DC – Measuring equipment for the top hat rail

ausschreiben.de

Supply voltage


Trans-former inputs


Type

Item

num

ber

65 -

275

V A

C

75 -

350

V D

C

5 - 1

470

V L

L

Num

ber

Dig

ital

inpu

ts/o

utpu

ts

Mem

ory

size

in M

B

Clo

ck

PT1

00 in

put

RS

485

Eth

erne

t

Mod

bus

mas

ter

US

B

● ● 5 4 512 ● ● ● ● ● ● UMD 707DC 11.45.2110




Typical connection variant – UMD 707DC



Technical specifications – UMD 707DC

Measurement


Current IDC Cl. 0.05







Symmetry yes









Data logger









Memory 512 MB flash





U:20-50 V AC / 20-75 V DC



Measurement ranges



Impedance 3.9 MOhm

Input signal X/4V



Ambient conditions



Electro- magnetic compatibility

Radiation EN 61000-4-2...-3...-4...-5...-6...-11






Standard Optional

UMD 709 / 710AThe UMD 709/710A is a compact, high-end network quality measurement device for installation on the DIN top hat rail. It measures 4-phase current and voltage with up to 3 tariffs in 4-quadrant mode in class 0.05 and therefore the energy in class 0.2s, as well as all common network sizes such as harmonics up to the 128th harmonic. Residual currents can be measured continuously using the 5th connection.The device maps the network quality according to EN 50160, EN 61000-2-2, EN 61000-2-4, EN 61000-2-12 and is certified according to class A*. It has a large 512 MB memory. The device can be accessed via the Ethernet interface and live measured values can be observed using the web browser via the corresponding web server. This enables internet protocols such as NTP to also be read in and PLC systems and building management systems to be connected easily. Digital inputs/outputs and a serial RS485 interface are integrated. The GO firmware module is used to activate oscilloscope functions for current and voltage, and to set trigger signals for limit value events. The PQ S or PQ A* software module can be used to record and evaluate the voltage quality continuously.

* only for the UMD 710A

Supply voltage




Type

Item

num

ber

65 -

275

V A

C

75 -

350

V D

C

5 - 1

470

V L

L

Num

ber

Dig

ital

inpu

ts/o

utpu

ts

Mem

ory

size

in M

B

Clo

ck

PT1

00 in

put

RS

485

Eth

erne

t

Mod

bus

mas

ter

Cla

ss A

US

B

● ● 1 4 512 ● ● ● ● ● - ● UMD 709 11.15.2110

● ● 1 4 512 ● ● ● ● ● ● ● UMD 710A 12.16.2110

UMD 709 / 710A – Measuring equipment for the top hat rail

ApplicationThe device is used to monitor the voltage quality in computing centres, buildings or at energy suppliers continuously. Furthermore, the UMD 709/710A is used with a corresponding residual current transformer to record residual currents/direct currents.

ausschreiben.de




Technical specifications – 709 / 710A

Measurement


Current IL1; IL2; IL3; ILN; Idiff Cl. 0.05




Apparent power S1; S2; S3; SN; 3S Cl. 0.2



Symmetry yes









Data logger








Temperature 1x PT100

Memory 512 MB flash




Supply voltage U:65-275 V AC / 75-350 VDC

U: 80-350 V DC



Measurement ranges



Impedance 3.9 MOhm




Ambient conditions




Radiation EN 61000-4-2...-3...-4...-5...-6...-11






Standard

UMD 710EVUThe UMD 710EVU is a compact, high-end network quality measurement device for CAT IV environments for installation on the DIN top hat rail. It measures 3-phase current and voltage with up to 3 tariffs in 4-quadrant mode in class 0.05 and therefore the energy in class 0.2s, as well as all common network sizes such as harmonics up to the 128th harmonic. The device maps the network quality according to EN 50160, EN 61000-2-2, EN 610002-4, EN 61000-2-12 and is certified according to class A. It has a large 512 MB memory. The device can be accessed via the Ethernet interface and live measured values can be observed using the web browser via the corresponding web server. This enables internet protocols such as NTP to also be read in and PLC systems and building management systems to be connected easily. 4 digital inputs/outputs and a serial RS485 interface are integrated. The GO firmware module is used to activate oscilloscope functions for current and voltage, and to set trigger signals for limit value events. The PQ A firmware module can be used to record and evaluate the voltage quality continuously.

ApplicationThe device is used in all CAT IV environments.A suitable CAT IV mains adapter is available in our accessories.

Supply voltage


Type

Item

num

ber

10 -

30 V

DC

5 - 1

470

V L

L

Dig

ital

inpu

ts/o

utpu

ts

Mem

ory

size

in M

B

Clo

ck

PT1

00 in

put

RS

485

Eth

erne

t

Mod

bus

mas

ter

Cla

ss A

US

B

● ● 4 512 ● ● ● ● ● ● ● UMD 710EVU 12.32.4110

UMD 710EVU – Measuring equipment for CAT IV environments

ausschreiben.de




Technical specifications – 710EVU

Measurement






Apparent power S1; S2; S3; SN; 3S Cl. 0.2



Symmetry yes








Flickers yes Cl. 2

Data logger



Voltage dips yes

Oscillogram function yes




Temperature 1x PT100

Memory 512 MB flash




Supply voltage U: 10-30 V DC


Overvoltage category CAT IV/300 V

Measurement ranges



Impedance 3.9 MOhm




Ambient conditions




Radiation EN 61000-4-2...-3...-4...-5...-6...-11






Typical connection variant – UMD 710EVU

CAT IVPOWER COMPACT



Supply voltage Functions

Communication Type Order no.Digital inputs Relay

outputs PT100

12-24 V DC 4 4 1 RS485 IO-M 544 80.33.3801

12-24 V DC 4* - - RS485 IO-M 540 80.33.3802

IO-M 500 – I/O extension modules for UMD measurement devices

IO-M 500You can use the IO-M 500 modules to add digital inputs, relay outputs or temperature inputs to the UMD measurement devices. Therefore, in addition to the inputs/outputs present on the UMD, further signals can be captured or output.

Application:

• Connection via RS485• Pulse recording• Status messages• Alarm signals• Temperature recording

Dimensional drawings

62.2

11.0

45.0

67.5

89.7

96.5

98.0

53.6



Firmware modules

Designation Description Availability Order no.

PQ S DIN EN 50160See technical specifications /

upon request

52.21.1340

GO Oscilloscope function 53.21.1340

RCS Ripple control signals 54.21.1340

Designation Mapping Display Saving Availability Order no.

MM

● - - UMD 705E, UMD 807E

55.21.1340● ● - UMD 97E

● - ● UMD 707, UMD 709, UMD 710

● ● ● UMD 98, UMD 913

PQ S / PQ AThese modules enable the measured values to be evaluated according to EN 50160 or EN 61000-2-2, EN 61000-2-4, EN 61000-2-12. Flickers, voltage dips and interharmonics can be displayed. Evaluation is performed weekly and is saved in an archive. Limit value violations and voltage dips can be saved in a separate archive.

PQ A is included with the UMD 710.

GO - general oscillogramGO records transient events (e.g. voltage dips). GO is included with the UMD 710.

RCS - ripple control signalsThe RCS module (for mains or signal voltage) activates the option to detect, evaluate, decode and save different ripple control signals on the monitored current network. The signal frequency can be adjusted manually. The signals are decoded and archived in the internal memory. The signal level can also be displayed live on devices with displays.

ausschreiben.de

MM - ModbusMasterThis firmware extension collects Modbus data from connected slaves and places it in new register addresses on the master. The slave data for some door built-in units can be shown on the master’s display and also saved for some devices. The MM is required when using our IO-M extension modules or the MMU / MMI measurement modules for example.




ww

w.p

q-pl

us.d

e

PLUS-SIZED SERVICES.

DC-500 - Option for measuring in networks with an extended frequency range

Our measurement devices are suitable for a range of applications such as power generation (photovoltaics), computing centres, transport (charging stations), telecommunications, aviation and space flight, marine, military (normally 400 Hz), rail in the form of trains and trams (DC, 16.7 Hz) and many more. The aforementioned systems are critical infrastructure and must therefore monitor the power and their voltage quality. As a result, many of our devices are not just for use in the common 50 / 60 Hz networks, but are also suitable for DC networks or AC networks with 16.7 Hz, 75 Hz, 400 Hz - 500 Hz.

Measuring AC-DC networksMeasurements in AC networks from f= 16.7Hz to 500 Hz

Aviation

Military

Rail

Photovoltaics

Telecommunication

Computing centres

DC transferCharging columnsMarine

400 Hz

16.7 Hz

75 Hz

DC

We can therefore activate the “DC-500” setting on the UMD 701DC / UMD 707DC devices. These devices can be used in networks of up to 500 Hz. For projects in which direct currents must also be measured, we recommend connecting special hall current sensors with x/4 V



ww

w.p

q-pl

us.d

e

PLUS-SIZED SERVICES.

Residual current measurement

Computing centresOfficesBanks

Radio centres Industry

No residual currentResidual current

Hospitals

The residual current monitor calculates and monitors the residual currents in earthed low voltage networks. Calculation is performed as a vectorial sum of all active conductors.Residual currents typically occur due to leakage currents or insulation faults, which are normally due to mechanical faults, faulty components, etc.

By monitoring residual currents, it is possible to issue an error message at a user-defined limit value and to prevent an unwanted complete system shutdown before the residual current circuit breaker (RCCB, RCD) trips. This method can be used by the maintenance staff to perform maintenance and repair work in good time and to prevent unplanned interruptions to operation, which could be very costly.

Shut-down by RCD

Warning message from the measurement system

Normal operation

Res

idua

l cur

rent

Time

Shut-down

Shut-down

Warning

Information advantage



MMD 97 – Mobiles PQ measurement device

MMD 97 The MMD 97 mobile measuring case records all voltage quality parameters and logs this data as a single-phase or a three-phase measurements in the low voltage network (230/400 VAC), in distribution networks, in transformer stations, switching systems and as a direct consumption measurement on machines and in buildings. An integrated UMD 97EL in an IP65 plastic housing is the heart.

The device used the PQ S and GO firmware modules to map all voltage quality functions according to EN 50160.

ApplicationThe case is used for mobile network quality measurements or for comparison measurements of existing measuring equipment.

Standard

Designation Functions Communication Item number

MMD 97 Network analysis up to the 50th harmonic order Ethernet, USB 71.42.9110

Optional

ausschreiben.de




Transformers

The measuring case is equipped with 333 mV voltage inputs. This enables flexible Rogowski spools and KBR cable type current transformers to be connected directly.

Model A B C D

MMD Flex 80 80 96 285 80 mm

MMD Flex 115 115 141 385 115 mm

MMD Flex 200 200 240 628 200 mm

[3 x KBU FLEX] I rated [A] d [mm] Connection Auxiliary voltage Overvoltagecategory Item number

MMD FLEX SET 80 300 80 2 m Cable 5 VDC15 mA max 600 V CAT IV 03.38.3336


MMD FLEX SET 115 2500 115 2m Cable 5 VDC15 mA max 600 V CAT IV 03.38.3338


Other sizes upon request.

ausschreiben.de

ZubehörMagnet Messadapter. 4-teiliges Set für Spannungsabgriff. Bestehend aus 1x Prüfspitze Blau und 3x Prüfspitze Rot.

Bezeichnung Buchsen-Ø Länge Spitzen-Ø Überspannungs-kategorie Artikelnummer

Magnet Messadapter 4 mm 75 mm 7 mm CAT IV 1000 V 03.38.4407




Technical specifications – MMD 97

Measurement









Symmetry yes








Flickers yes

Data logger



Voltage dips yes




Memory 512 MB flash


Communication Ethernet 100 MBit/s, USB





Measurement ranges

Rated voltage 8-620 V AC(400 V AC)


Impedance 2.7 MOhm

Input signal 0-333 mV


Sampling rate 25,6 kHz

PQ evaluation EN 50160, EN 61000-2-2, EN 61000-2-4, EN 61000-2-12

Ambient conditions




Radiation EN 61000-4-2...-3...-4...-5...-6...-11


Protection class

Front IP 65 (closed state)

Rear IP 65 (closed state)




166

90

209

230/400 V AC50 / 60 Hz

L1

L2

L3

N

PE

Typical connection variant – MMD 97



MMD 710 – Class A

MMD 710 The MMD 710 mobile measuring case is a compact, high-end network quality measuring case. It measures 4-phase current and voltage with up to 3 tariffs in 4-quadrant mode in class 0.05 and therefore the energy in class 0.2s, as well as all common network sizes such as harmonics up to the 128th harmonic. The 5th connection can be used to measure residual currents continuously. The device maps the network quality according to EN 50160, EN 61000-2-2, EN 61000-2-4, EN 61000-2-12 in class A. It has a large 512 MB memory. The device can be accessed via the Ethernet interface and live measured values can be observed using the web browser via the corresponding web server. This enables internet protocols such as NTP to also be read in and PLC systems and building management systems

to be connected easily. Digital inputs/outputs and a Pt100 connection are integrated. The integrated GO firmware module is used to activate oscilloscope functions for current and voltage, and to set trigger signals for limit value events. The integrated PQ A software module can be used to record and evaluate the voltage quality continuously.

ApplicationThe case is used for mobile network quality measurements or for comparison measurements of existing measuring equipment.


MMD 710 4-phase measurement + 1 x residual current, network quality in class A, harmonic analysis up to the 128th harmonic Ethernet, USB 71.16.2110

Standard Optional



Technical specifications – MMD 710

Measurement









Symmetry yes









Data logger



Voltage dips yes






Memory 512 MB flash





U: 80-350 V DC



Measurement ranges



Impedance 3.9 MOhm




Ambient conditions




Radiation EN 61000-4-2...-3...-4...-5...-6...-11



Dimensions WxHxD (mm) 295 x 345 x 150



MMD 710 FLEX SET

The MMD 710 FLEX SET comprises 4x Rogowski spools of 3 different sizes.

4x Rogowski spools I rated [A] d [mm] Connection Position fault Overvoltagecategory Item number

MMD 710 FLEX SET 95 Adjustable on the MMD 710 [100,250, 400,630,1000,1500,2000,4000 A] 95 Cable < 1% 600 V CAT IV 03.38.4300





295

150

345

230/400 V AC40 / 70 Hz

L1

L2

L3

N

PE

Typical connection variant – MMD 710



CMD 68-MID – Energy meter

The CMD 68-MID is a modern energy meter for the DIN top hat rail and determines the active and reactive energy, as well as other electrical measured values (U/I/P).

Features• measures 3-phase current and voltage in 4-quadrant mode

and therefore the energy in class B• in the variants as direct measurement or primary side

connection with N/1 and 5 A• MID – Conformity• Calibration validity period: 8 years• Communication: S0, M bus or Modbus• Use in 230 / 400 V networks• illuminated, large and easy to read digital display• convenient operation via function keys• Secondary counter• Ethernet interface available

SummaryX/1//5 A, 45 A or 100 A, MID, 4 TE electronic three-phase current transformer-connected meter: - Installation on the top hat rail according to DIN EN 50022 - Active and reactive energy recording - Measurement of delivery and supply (2 energy directions) - Energy recording in two tariffs, controllable from outside - Resettable energy register - Display energy quality features (current, voltage and power per phase) – Transformer ratio can be adjusted once (MID) - LCD; 6.2-digit with background lighting - Declaration of conformity according to MID, suitable for accounting purposes - S0 - Pulse outputs for both energy directions, pulse rate adjustable via software - Stable plastic housing, only 4 TE, can be installed regardless of wide position - Approved for two-wire and four-wire networks - M bus or modbus interface optionally available

ApplicationThe device is used to measure consumption in low-voltage main distribution and sub-distribution systems for ISO 50001. It can also be used for sub-accounting according to MID. Interfaces can be used to use it in control systems for cost centre billing and to include it in energy management systems.


CMD 68-51MID Transformer measurement N/1 and 5 A 2 S0 pulse outputs 26.68.0051

CMD 68-52MID Transformer measurement N/1 and 5 A Modbus + 2xS0 26.68.0052

CMD 68-53MID Transformer measurement N/1 and 5 A M bus + 2xS0 26.68.0053

CMD 68-54MID Transformer measurement N/1 and 5 A Modbus TCP + 4xS0 26.68.0054

CMD 68-101MID 100 A direct measurement 2 S0 pulse outputs 26.68.0101

CMD 68-102MID 100 A direct measurement Modbus + 2xS0 26.68.0102

CMD 68-103MID 100 A direct measurement M bus + 2xS0 26.68.0103

CMD 68-104MID 75 A direct measurement Modbus TCP + 4xS0 26.68.0104

Programming software with IR probe and TK bracket 26.68.0001

ausschreiben.de




CMD 68-5MID – Transformer meter

Transformer measurement N/1 and 5 A

Type

Technical data CMD 68-51MID CMD 68-52MID CMD 68-53MID

Item number 26.68.0051 26.68.0052 26.68.0053

Communication 2 S0 pulse outputs Modbus +2x S0 MBus +2x S0

Baud rate (Bits/sec) - 300-9600 300-9600

Voltage (U) 3x230/400 V 3x230/400 V 3x230/400 V

Current (I) 1.5/6 A 1.5/6 A 1.5/6 A

Frequency (Hz) 50 Hz 50 Hz 50 Hz

Measurement size Active and reactive energy in delivery and supply direction

Active and reactive energy in delivery and supply direction


Meter type illuminated LC display illuminated LC display illuminated LC display

Digits 5.3 5.3 5.3

Precision B B B

Own consumption per phase <2 W <2 W <2 W

Temperature range -25°C to +55°C -25°C to +55°C -25°C to +55°C

Protection class IP 51 IP 51 IP 51

Maximum wire cross section 10 mm² 10 mm² 10 mm²

Maximum wire cross section for additional terminals 2.5 mm² 2.5 mm² 2.5 mm²

Dimensions (WxHxD) 70 x 140 x 63 mm 70 x 140 x 63 mm 70 x 140 x 63 mm

Weight 0.28 kg 0.28 kg 0.28 kg

Non-return device yes yes yes

Number of tariffs 2 2 2

Pulse outputs 10,000 pulses/ kWh 10,000 pulses/ kWh 10,000 pulses/ kWh

70



CMD 68-45MID – Alternating current meter

Direct measurement, 1-phase

Type


Item number 26.68.0451 26.68.0452 26.68.0453



Voltage (U) 230 V 230 V 230 V

Current (I) 45 A 45 A 45 A






Digits 5.2 5.2 5.2

Precision B B B






Dimensions (WxHxD) 17.5 x 117.5 x 63 mm 17.5 x 117.5 x 63 mm 17.5 x 117.5 x 63 mm




Pulse outputs 0.01 to 10.000 pulses/ KWh 0.01 to 10.000 pulses/ KWh 0.01 to 10.000 pulses/ KWh17

.5



CMD 68-100MID – Three-phase current meter


Type


Item number 26.68.0101 26.68.0102 26.68.0103



Voltage (U) 3x230/400 V 3x230/400 V 3x230/400 V

Current (I) 5(100) A 5(100) A 5(100) A






Digits 6.2 6.2 6.2

Precision B B B






Dimensions (WxHxD) 70 x 140 x 63 mm 70 x 140 x 63 mm 70 x 140 x 63 mm




Pulse outputs 1,000 pulses/ kWh 1,000 pulses/ kWh 1,000 pulses/ kWh

70



CMD 68-MID – Network meter

Transformer measurement N/1 and 5 A


Features

• Ethernet interface• Modbus TCP• measures 3-phase current and voltage in 4-quadrant mode• in the variants as direct measurement (75 A) or transformer

measurement (1 / 5 A)• MID approval• illuminated, large and easy to read display• 4 S0 pulse outputs• Load profile• Web servers

ausschreiben.de

Type

Technical data CMD 68-54MID CMD 68-104MID

Item number 26.68.0054 26.68.0104

Communication Modbus TCP + 4x S0 Modbus TCP + 4x S0

Voltage (U) 3x230/400 V 3x230/400 V

Current (I) 1 / 5 A 75 A

Frequency (Hz) 50 Hz 50 Hz

Measurement size Active and reactive energy in delivery and supply direction Active and reactive energy in delivery and supply direction

Meter type illuminated LC display illuminated LC display

Digits 7.1 7.1

Precision B B

Own consumption per phase 0.8 W 0.8 W

Temperature range -25°C to +55°C -25°C to +55°C

Protection class IP 20 IP 20

Maximum wire cross section 35 mm² 35 mm²

Maximum wire cross section for additional terminals 2.5 mm² 2.5 mm²

Dimensions (WxHxD) 90 x 90 x 67 mm 90 x 90 x 67 mm

Weight 0.33 kg 0.33 kg

Non-return device yes yes

Number of tariffs 2 2

Pulse outputs 10 pulses/kWh 1,000 pulses/kWh




Typical connection variant


CMD 68-104CMD 68-54



PQ M centre

PQ M centre Automated meter reading guarantees fault-free and continuous data recording for later analysis and billing according to ISO 50001. All energy meters (e.g. electricity, water, heat, gas) with an M bus interface according to EN 13757-2,-3 are read out via a 2-wire line. A corresponding, simple user interface is used for configuration and data evaluation via an IP address with any common web browser.In addition to the MID energy meters, the UMD 96M and UMD 704M can be connected to the PQ M centre. The micro SD card (16 GB) has sufficient space for your energy data.

Features

• Web server for graphical evaluation and professional data processing

• CSV, JSON, FTP upload• IoT & Industry 4.0 ready• M bus to BACnet IP gateway• Firmware update & backup

ConnectionsGraphical LCDGraphical 60x30 mm graphical LCD with background lighting for user-friendly configuration of the network settings.

Designation Number of devices Item number

PQ M centre 20 up to 20 M bus devices 26.68.1020

PQ M centre 60 up to 60 M bus devices 26.68.1060

Interfaces1 x USB type A1 x USB type B1 x Ethernet 10/100 base RJ45

Inputs3 x M bus4 x S0 pulse input2 x temperature PT1000

Outputs 2 x relay

Operating voltage 24 VDC

Current consumption Max. 1 A

ausschreiben.de




Technical specifications

Number of M bus slaves Max. 20 / 60 / 120 / 250 (250 x 1.5 mA), see order information

Evaluation Web server / diagram suitable for ISO 50001

Interfaces1 x USB type A1 x USB type B1 x Ethernet 10/100 base RJ45

Inputs3 x M bus4 x S0 pulse input2 x temperature PT1000

Outputs 2 x relay

M bus level converter High-performance level converter integrated

Data export .csv and JSON file, other formats upon request

Memory Micro SD card, SQL

Firmware update yes, possible via user interface

Backup yes, possible via user interface

Configuration Local and remote configuration with web server

Operating voltage 24 VDC

Current consumption Max. 1 A

Temperature range 0-55°C

M bus baud rate 300, 600, 1200, 2400, 4800, 9600

M bus standby current Max. 375 mA (250 x 1.5 mA), see order information

Compatibility Heat, water, gas and electricity meters with M bus according to EN 13757-2, -3 (formerly EN 1434-3)

Galvanic isolation, short circuit and overload protection yes

Safety CE mark

EMC measurement EN 61000-6-2

Immunity EN 61000-6-3

M bus standard EN 13757-2, -3

Energy management Suitable for ISO 50001

BACnet IP B-ASC certified

Display LCD display with background lighting

Weight Approx. 400 g

Assembly 35 mm DIN rail

Housing Polycarbonate, recyclable, not flammable

PQ M centre



Typical connection variant


PQ M centre

PQ Plus GmbHHagenauer Straße 691094 Langensendelbach

Tel: (+49) 9133-60640-0 Fax: (+49) 9133-60640-100E-Mail: [email protected]: http://www.pq-plus.de

Geschäftsführer:Daniel Fierus-Beyer

Umsatzsteuer Identifikationsnummer:DE 301 767 284

Further information and the current catalogueare available on our website:http://www.pq-plus.de Stand: 2019.02

Technische Änderungen vorbehalten.

The data contained in the product catalogue has been compiled to the best of our knowledge and ability. Changes and errors are expressly reserved. Illustrations similar to these do not represent contractual conditions within the meaning of Section 305 I of the BGB (German Civil Code). They are references without independent regulatory content which merely express that the information contained in the catalogue is provisional and non-binding to the extent that it can still be corrected before or upon conclusion of a contract. No contractual regulatory con-tent, in particular any limitation of the rights of the contractual partner with respect to liability or warranty law, can be inferred from these references. PQ PLUS GmbH delivers according to the green delivery terms and conditions of the German Electrical & Electronic Industry (ZVEI).

2019 PRODUCT CATALOGUE - PQ Plus · CATALOGUE. 2 2019 product catalogue PQ PLUS General information...

Documents

Transcript of 2019 PRODUCT CATALOGUE - PQ Plus · CATALOGUE. 2 2019 product catalogue PQ PLUS General information...