www.pkcco.com

“Where the Lamination Lives !! Introduction of PKC Co., Ltd.

We - PKC Co.,Ltd. - are actual manufacturer for Thermal Lamination Films and also several kindsof specialty films for Optical, Medical, Electronic,,,etc of industrial application purpose and wehave been doing business as one of a biggest manufacturing capacity of supplier in the worldmarket places until this moment, and currently we are supplying our Thermal Bopp LaminationFilms to almost all of the world major market places(58 countries) through our major distributorsby our own production identity of brand name as a exclusive supplier since Oct, 1991.

Actually, we - PKC Co.,Ltd. - started from small chemical laboratory with small production linesand therefore most of peoples working for our company are real engineers. It is truly twodecades year to look back and reflect on whether we came from and where we are going rightnow.

Expanding on our production lines with modern machineries as well as robot systems, largeproduction depth, quality testing devices and quality assurance systems has enable PKC tobring the first practical and automated mass-production lines system for full range of ThermalBopp Lamination Films, PET based lamination films, industrial specialty films,,etc and also wecreated several newly self-developed products with our own patented chemical raw materialsby new technology related print finishing continuously.

We - PKC Co.,Ltd. - have self-developed many of thermal lamination films by ourselves from theraw materials to specific technical points includes our manufacturing know-how relatedcurrent fully automated mass-production lines system which shows why we are different fromthe others clearly.

Basically, our thermal lamination films are engineered to last and designed to provide a saferenvironment for over the years, our series of quality products have endured virtually every testyou could encounter in ordinary use, and the proof of success is all over the world marketplaces.

Anyhow, we see that it shall be essential for you to double-check the prices considering itsproduction quality comparing other supplies by yourself, and therefore we are willing to provideyou samples at free of charge per your request at any specification of products freely.

We also always welcome your visit to our company for double-checking allthe details by yourself, and we can show you very clearly from ”Whatis the best raw materials for thermal lamination films productsand our automated mass-production lines system, and specialtechnical points which shows why we are totally differentfrom others” definitely.

If you have any question or anything you need ourproduction information, we will be happy to answerimmediately. We always do believe that ourcustomer’s success must be same as our success inthe market places and therefore we will do our best tosupport your business up for grab a whole your marketexclusively at any cases.

www.pkcco.com

PKC - Thermal OPP FilmPKC Thermal Bopp Lamination Films are produced by fully automated mass-productionlines system and it has been mainly through our unique extrusion production lines, and wealways apply 100% safety raw materials to the human-being and eco-friendly materials tomake environmental-friendly Thermal Bopp Lamination films products.

So, especially, we do not apply A/C(Anchor Coating) chemical harmful materials to all ofour production of Thermal Bopp Lamination films due to the same as above reasons.

We've also developed our own unique raw materials for base films and adhesive(EVA,EEA,,etc) materials which is used to be applied for strong adhesiveand low meltingtemperature during the lamination process on prints.

PKC's products are engineered to last and designed to provide a safer environment forover the many years, and our current series of quality products have endured virtuallyevery test you could encounter in ordinary use, and the proof of success is all over theworld market places.

Characteristic of PKC Thermal Bopp Lamination Films (Gloss & Matt)

Environmental Friendly - 100% free from A/C(Anchor Coating) chemical materials.

No use A/C materials - eliminating the risk of fire and ordor

Applicable to any size width (150mm - 2,600mm)

Superior tensile streng & Chemical resistance

Low melting temperature & Low level pressure

Strong bond(adhesive) strength

Excellent Transparencey(gloss) & clarity(haze)

High durability and softness

Lay flat and no curl effect

www.pkcco.com

PKC - Thermal BOPP Lamination Films PKC's Thermal BOPP Lamination Films (Thermal OPP Films) are produced through our automatedmass-production lines system mainly through extrusion coating where the raw materials of speciallyself-developed adhesive(EVA) is applied, and this adhesive is heat reactivated during the laminationprocess and applied with a combined laminating condition of temperature, pressure and speed.

PKC's Thermal Bopp Lamination Films(Thermal OPP Films) have a wide variety of application as aproducts including all types of print lamination and also UV Spot Varnishing, Stamping folis,,,etc withmajor market in Book covers(Book jacket), Carton Pacaging, Magazines, Catalog, Shopping bags,Calendar, Post, Dust jacket,,etc and all forms of commercial prints.

PKC's Thermal Bopp Lamination Films(Thermal OPP Films) - Professional service, vast inventory,specialized extrusion and coating includes converting capabilities, and our current key businesspartners at all seven continents have provided our products by clear advantages in quality, speed ofdelivery within same business day, immediate service and cost effectiveness.

PACKING of Thermal Bopp Lamination

We, PKC Co.,Ltd. - are currently supplying 58 countries with many sizes(width) and our mostpopular widths are : 9", 12", 15", 17", 18", 19", 20",23", 25", 27",,,etc up to 100" and also 310mm, 320,340, 400, 410, 420, 430, 440, 450, 460, 470, 480, 490, 495, 500, 510, 520, 560, 590, 595, 600, 620, 630,640, 680, 690, 695, 710, 730, 740, 750, 760, 770, 790, 890, 900, 910, 950, 990,,, up to 2,600mm.

Actually, consolidation quantity shall be depends on the size(width) of the roll with its quantity and itusually can be loaded 9 rolls per story(layer), less than 2,200mm of maximum pallet heightincluding all other packing materials like - (pallet 135mm, box packing 50mm per layer,,etc).

For example, 450mm X 3,000M X 9 rolls(per story) X 4 story = 36 rolls, it can be loaded at one palletas a maximum considering its height(2,150mm).

Roll Length : 3,000M (or 2,000M) - USA(10,000 FT - 3,048M)1 X 20ft : 10 pallets (9 rolls/per story) and 2 pallets (3 rolls/per story)

Approx. 450,000 square meter more or less (10-13 MT)1 X 40ft : 20 pallet (9 rolls/per story) and 2 pallets (6 rolls/per story) or 22 pallets (9 rolls/per story)

Approx. 900,000-1,100,000 square meter (19-22 MT).

(Thermal OPP Films)

(Thermal OPP Film)

Thermal BOPP Lamination Film 2-1. Characteristic & Specification1. GLOSS Type - Thermal Bopp Lamination Films(Model No.: EM21-1)

2. APPLICATION : BOOK COVER & PRINTS,PHOTO and PAPERS

3. MELTING TEMPERATURE : 70 - 120 or less on the Laminator

(Depend on the machine and its lamination speed)

4. SPECIFICATION

The above data is based on BOPP Laminating Film.All properties are tested under standard laboratory conditions ; 23 2 : 50 5% RH, unless otherwise stated.MD : Machine Direction, TD : Transverse DirectionThe above data is for reference only.

PROPERTIES UNIT TYPICAL VALUES TEST METHOD

TREATMENT DYNE/CM I.S 46 , O.S 38 I.S 46 , O.S 38

TENSILE MD/

10 ASTM

STRENGTH TD 14.2 D-882

ELONGATION MD%

162 ASTM

AT BREAK TD 42 D-882

HEAT MD%

1.5 ASTM

SHRINKAGE TD 0.3 D-1204

COEFFICIENT OUT/INSIDE US 1.02/0.34 ASTM

OF FRICTION OPP/OPP UK 0.9/0.23 D-1894

HAZE BASE FILM%

1.9 ASTM D-1003

GLOSS 45 142 ASTM D-2457

(Thermal OPP Film)

www.pkcco.com

Thermal BOPP Lamination Film2-2. Characteristic & Specification1. MATT Type - Thermal Bopp Lamination Films(Model No.: EM21-1)

2. APPLICATION : BOOK COVER & PRINTS,PHOTO and PAPERS

3. MELTING TEMPERATURE : 70 - 120 or less on the Laminator

(Depend on the machine and its lamination speed)

4. SPECIFICATION

The above data is based on BOPP Laminating Film.All properties are tested under standard laboratory conditions ; 23 2 : 50 5% RH, unless otherwise stated.MD : Machine Direction, TD : Transverse DirectionThe above data is for reference only.

PROPERTIES UNIT TYPICAL VALUES TEST METHOD

TREATMENT DYNE/CM I.S 46 , O.S 38 I.S 46 , O.S 38

TENSILE MD/

8.9 ASTM

STRENGTH TD 13 D-882

ELONGATION MD%

158 ASTM

AT BREAK TD 45 D-882

Heat MD%

1.2 ASTM

SHRINKAGE TD 0.1 D-1204

COEFFICIENT OUT/INSIDE US 1.54/0.19 ASTM

OF FRICTION OPP/OPP UK 1.63/0.20 D-1894

Haze BASE FILM%

84 ASTM D-1003

GLOSS 45 4.3 ASTM D-2457

(Thermal OPP Film)

PKC - Digi-Melt OPP FilmPKC‘s Digi-melt Thermal OPP Laminating Films are developed for more easy &perfect lamination with Digital Output (Digital printing materials).

Most of digital output makes it impossible for most laminating films to adhere to thesurface of the digital print(digital output) but PKC's "Digi-melt" film is one of premiumthemral lamination film with more aggressive adhesion which is specially developedfor the lamination with latest digital prints materials.

This "Digi-melt" film is designed with a strong adhesive that has been applied ourunique chemical composition by self-developed our own manufacturing process withformunation specially for easy & perfect lamination with prints from like - HP, Xerox,Canon,,etc of toner based digital printing outputs as well as some of inkjet output.

Characteristic of PKC Thermal Bopp Lamination FilmsEnvironmental Friendly - 100% free from A/C(Anchor Coating) chemical materials. No use A/C materials - eliminating the risk of fire and ordorSuperior tensile streng & Chemical resistanceLow melting temperature & Low level pressure Strong bond(adhesive) strength Excellent Transparencey(gloss) & clarity(haze)High durability and softness Lay flat and no curl effect.

www.pkcco.com

PKC – Metalized Film PKC’s Thermal Metalized Films are developed for more valuable printing finish.

We are currently supplying various colors like - Gold, Silver, Blue, Red, Green, Pink,,etc and we can apply for more specific colors by customer’s request.

PKC’s all of Metalized Films make it possible to print over the surface of films after thelamination. So, now we are supplying our Meatalized films to all over the worldmarket places for luxury production packaging or printing fihish in general.

Characteristic of PKC Thermal OPP Laminating Films Applicable to over-coating or printing after the lamination. Superior tensile strength & chemical resistanceLow melting temperature & Low level pressure Strong adhesiveness after laminationMetalizing or printed colors will not easily come off. No wrinkle and curl during the lamination progress

PKC – Anti-scuff Matt FilmPKC Thermal Anti-scuff Matt Film has a scratch-resistant material on the film and it hasbeen developed to stand any scratch on the surface of laminated sheet and also makeit easy processing on thermal lamination job.

It has been specially treated to the surface of the film and it protects your valuableprinting materials from outside abrasion or scratch for a long time.

Characteristic of PKC Thermal Anti-scuff Matt Films Strong Anti-scuff / Anti-scratch (applicable various width up to 2,000mm)Environmental Friendly – 100% free from A/C(Anchor Coating) chemical materials No use A/C materials – eliminating the risk of fire and odor Superior tensile strength & chemical resistance Low melting temperature & Low level pressure Strong bond(adhesion) strengthExcellent Transparency & clarity(haze) High durability and softness Lay flat and no curl effectCompetitive and reasonable price

PREMIUM THERMALOPP LAMINATING FILMSPRODUCTION LINE & PACKING 1

www.pkcco.com

PKC – Nylon Lamination FilmPKC’s Themral Nylon Lamination Films are developed for mainly book-cover and book-jacket as a curl-free lay flat effect after the lamination.

Generally, we call this products breathable film with no curl effect and naturally,Nylon films are a bit hygroscopic, so it easily absorbs moisture from ambient air.

Characteristic of PKC Thermal Nylon Lamination Films Curl-free(Lay-flat) and No Curl effect after the lamination processEnvironmental Friendly – 100% free from A/C(Anchor Coating) chemical materials No use A/C materials – eliminating the risk of fire and odor Superior tensile strength & chemical resistance Low melting temperature & Low level pressure Strong bond(adhesion) strengthHigh durability and softness

PREMIUM THERMALOPP LAMINATING FILMSPRODUCTION LINE & PACKING 2

“Touch the real spirit of Thermal Bopp Lamination Films”Phone : +82-31-938-8821/31 FAX : +82-31-938-8843 Address : 810 Dongmun Tower 1st - 1323 Baekseok-Dong,

Ilsandong-Gu, Goyang-City, Gyeonggi-Do, KoreaE-mail : pkcco@pkcco.com

EuropeU.K, Spain, Italy, France, Germany, Portugal, Poland, Croatia, Hungary, Austria,Belgium, Greece, Czech Republic, Bulgaria, Switzerland, Sweden, Russia, Belarus,Turkey, Norway

America (North & South) USA (United States of America), Canada, Mexico, Brazil, Argentina, Chile, Peru,Colombia, Venezuela, Equador, Panama

Middle East UAE(Dubai), Saudi Arabia, Kuwait, Egypt, Jordan, Israel, Palestine, Iran

AfricaSouth Africa, Nigeria, Kenya

OceaniaAustralia, New Zealand

AsiaJapan, Singapore, Taiwan, Philippines, Malaysia,Indonesia, Hong Kong, Vietnam, Thailand, China

GLOBAL N

ETWORK