2017 NavPod Product Selection Guide - Price Book · This Product Selection Guide and Price Book is...
Transcript of 2017 NavPod Product Selection Guide - Price Book · This Product Selection Guide and Price Book is...
for Offshore Power
for Sailing
for Inland Fishing
2017 Price Book and Product Selection Guide
New Product Release
PedestalPods for Bass BoatsPedestalPods are better than bracket mounting. Very sturdy and secure, yet clean and attractive, this mount provides protection of your fi shfi nder/chart-plotter from the harshest of wet boating conditions. PedestalPods provide the convenience of easily reaching and controlling the fi shfi nder/chartplotter while providing added security with protection from theft.
PedestalPods position your fi shfi nder/chartplotter at 20” off the deck and locat-ed near the bow and at a 45-degree angle for ease of viewing while fi shing. This allows the user to easily reach and access the fi shfi nder/chartplotter for chang-es to range, zoom or even control the trolling motor.
PedestalPods are manufactured with a double gasket system that provides an excellent watertight seal keeping spray off the electrical connections on the back of your fi shfi nder/chartplotter assuring reliability and longevity of your marine electronics.
Your fi shfi nder/chartplotter is easily fl ush mounted into the pre-cut face of the NavPod. The heavy duty, powder coated aluminum pedestal tube is 3” in diameter with a 5” round base and has a large 1.75” opening providing plenty of room for running wires and connectors internally for a very clean look and provides protection for wires and electrical connectors from water intrusion, UV exposure or damage from just getting kicked or snagged and ripped out of their sockets.
NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft.
There are pre-cut models available for 7”, 9” and 12” LCD displays from all major marine electronic manufacturers.
New Product Release
PowerPods Carbon SeriesPowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fi shfi nder or chartplotter at a 20-degree viewing angle. Power-Pods provide the clean look of fl ush mounting with the advan-tages of a swivel base.
PowerPods are now available in two color options. Black car-bon and high gloss white. Constructed out of durable ABS like all Gen3 PowerPods, these new black carbon models will also have the same high gloss fi nish and UV stability.
NavPods are made to protect your Marine Electronics from the harshest of wet boating conditions. Your fi shfi nder or chart-plotter is easily fl ush mounted into the pre-cut front of the NavPod. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your Marine Electronics assuring years of reliability.
NavPods come with a security wrench and nickel chrome-plat-ed stainless steel tamperproof screws for protection from theft. There are pre-cut models available for all 7”, 9” and 12” LCD displays from all major marine electronic manufac-turers.
Convenience. Protection. Security.
Table of Contents
Furuno Page PowerPods 1 PedestalPods 1 SailPods 1Garmin PowerPods 2 PedestalPods 3 SystemPods 4 SailPods 5 RailMounts 5Humminbird PowerPods 6 PedestalPods 6Lowrance PowerPods 7 PedestalPods 7Raymarine PowerPods 8 PedestalPods 8 SystemPods 9 SailPods 10 RailMounts 11Simrad PowerPods 11 PedestalPods 12 SystemPods 12 SailPods 15 RailMounts 15B&G PowerPods 16 PedestalPods 17 SystemPods 17 SailPods 19 RailMounts 19
InstrumentPods 20SpeakerPods 20StationKits 21Tamperproof Wrench 21AngleGuards/Top Plates 22UnCut NavPods 24SuperSailPod/MastPod 26
and more
for
541-318-1272
Call us
Email us
This Product Selection Guide and Price Book is a list of the most popular Nav-Pods at the time printing. If you can’t fi nd a Pre-Cut model listed within, please give us a call or shoot us an email and we will gladly help you. We know boats, we know electronics, we are here to help
Gen3
20655 Carmen LoopBend, OR 97702
www.oceanequipment.com
PowerPods Pre-Cut for FurunoPP4405 Pre-Cut for Furuno GP-1670/GP-1670F $299.99
PP4405-C Pre-Cut for Furuno GP-1670/GP-1670F(Carbon Series) $299.99
PP4818 Pre-Cut for Furuno GP-1870/GP-1870F $429.99
PP4818-C Pre-Cut for Furuno GP-1870/GP-1870F (Carbon Series) $429.99
PP5033 Pre-Cut for Furuno MFD12 NavNet 3D $529.99
PP5036 Pre-Cut for Furuno NavNet TZtouch 14.1” TZT14* $529.99
PP5037 Pre-Cut for Furuno GP1920C/NT/1833C/1933C/1943C / GP1900C $529.99
PP5038 Pre-Cut for Furuno 10” NavNet vx2 $529.99
PP5053 Pre-Cut for Furuno MFD8 NavNet 3D $459.99
PP5053-C Pre-Cut for Furuno MFD8 NavNet 3D (Carbon Series) $459.99
PP5066 Pre-Cut for Furuno NavNet TZtouch2 12” TZTL12F $529.99
SailPods Pre-Cut for FurunoGP1036 Pre-Cut for Furuno NavNet TZtouch 14.1” Multi Touch for 9.5” wide guard * $329.99
GP1066 Pre-Cut for Furuno NavNet TZtouch2 12” (TZTL12F) Multi Touch MFD for 9.5” wide guard $329.99
GP2033 Pre-Cut for Furuno MFD12 NavNet 3D for 12” wide guard $329.99
GP2036 Pre-Cut for Furuno NavNet TZtouch 14.1” Multi Touch for 12” wide guard $429.99
GP2053 Pre-Cut for Furuno MFD8 NavNet 3D for 12” wide guard $429.99
GP2066 Pre-Cut for Furuno NavNet TZtouch2 12” (TZTL12F) Multi Touch MFD for 12” wide guard $459.99
PedestalPods Pre-Cut for FurunoPED4405-C Pre-Cut for Furuno GP-1670/GP-1670F(Carbon Series) $299.99
* (requires flush mount bracket, FURUNO part No. CP19-01501)
Part number MSRP US$
Page 1
Page 2
PowerPods Pre-Cut for GarminPP4401 Pre-Cut for Garmin 7407/7407xsv/7607/7607xsv/720/721/740s/721xs/741xs/70s/70dv $299.99
PP4401-C Pre-Cut for Garmin 7407/7407xsv/7607/7607xsv/720/721/740s/721xs/741xs/70s/70dv (Carbon Series)
$299.99
PP4409 Pre-Cut for Garmin STRIKER 7sv/7dv 7-inch CHIRP fishfinder* $299.99
PP4409-C Pre-Cut for Garmin STRIKER 7sv/7dv 7-inch CHIRP fishfinder (Carbon Series)* $299.99
PP4410 Pre-Cut for Garmin STRIKER 5dv 5-inch CHIRP fishfinder** $299.99
PP4410-C Pre-Cut for Garmin STRIKER 5dv 5-inch CHIRP fishfinder(Carbon Series)** $299.99
PP4500-01 Pre-Cut for Garmin echoMAP 72sv/73sv/74sv/75sv/72dv/73dv/74dv/75dv $319.99
PP4500-01-C Pre-Cut for Garmin echoMAP 72sv/73sv/74sv/75sv/72dv/73dv/74dv/75dv(Carbon Black) $319.99
PP4600-01 Pre-Cut for Garmin EchoMap 92sv/93sv/94sv/95sv $399.99
PP4600-01-C Pre-Cut for Garmin EchoMap 92sv/93sv/94sv/95sv (Carbon Series) $399.99
PP4800-12 Pre-Cut for Garmin 820/820xs/840/840xs $429.99
PP4800-12-C Pre-Cut for Garmin 820/820xs/840/840xs (Carbon Series) $429.99
PP4800-20 Pre-Cut for Garmin 7408/7408xsv/7608/7608xsv $429.99
PP4800-20-C Pre-Cut for Garmin 7408/7408xsv/7608/7608xsv (Carbon Series) $429.99
PP4811 Pre-Cut for Garmin 8008/8208 $429.99
PP4811-C Pre-Cut for Garmin 8008/8208 (Carbon Series) $429.99
PP4900-04 Pre-Cut for Garmin echoMAP 92sv/93sv/94sv/95sv $439.99
PP4900-04-C Pre-Cut for Garmin echoMAP 92sv/93sv/94sv/95sv (Carbon Series) $439.99
PP5050-19 Pre-Cut for Garmin 7410/7410xsv/7610/7610xsv $459.99
PP5050-19-C Pre-Cut for Garmin 7410/7410xsv/7610/7610xsv(Carbon Series) $459.99
PP5200-12 Pre-Cut for Garmin 7412/7412xsv/7612/7612xsv $529.99
PP5200-12-C Pre-Cut for Garmin 7412/7412xsv/7612/7612xsv (Carbon Series) $529.99
PP5201 Pre-Cut for Garmin 1020/1020xs/1040xs $529.99
PP5201-C Pre-Cut for Garmin 1020/1020xs/1040xs (Carbon Series) $529.99
PP4400-09 Pre-Cut for Garmin GPSMAP 742xs/742/722xs/722 $299.99
PP4400-09-C Pre-Cut for Garmin GPSMAP 742xs/742/722xs/722(Carbon Series) $299.99
PP4500-08 Pre-Cut for Garmin GPSMAP 942xs/942/922xs/922 $319.99
PP4500-08-C Pre-Cut for Garmin GPSMAP 942xs/942/922xs/922 (Carbon Series) $319.99
PP4900-11 Pre-Cut for Garmin GPSMAP 1042xsv/1022xsv/1022 $439.99
PP4900-11-C Pre-Cut for Garmin GPSMAP 1042xsv/1022xsv/1022 (Carbon Series) $439.99
PP5200-13 Pre-Cut for Garmin GPSMAP 1242xsv/1222xsv/1222 $529.99
PP5200-13-C Pre-Cut for Garmin GPSMAP 1242xsv/1222xsv/1222 (Carbon Series) $529.99
Part number MSRP US$
Page 3
PedestalPod Pre-Cut for Garmin PED4401-C Pre-Cut for Garmin 7407/7407xsv/7607/7607xsv/720/721/740s/721xs/741xs/70s/70dv
(Carbon Series)$299.99
PED4409-C Pre-Cut for Garmin STRIKER 7sv/7dv 7-inch CHIRP fishfinder(Carbon Series)* $299.99
PED4410-C Pre-Cut for Garmin STRIKER 5dv 5-inch CHIRP fishfinder(Carbon Series)** $299.99
PED4500-01-C Pre-Cut for Garmin echoMAP 72sv/73sv/74sv/75sv/72dv/73dv/74dv/75dv(Carbon Series) $319.99
PED4600-01-C Pre-Cut for Garmin EchoMap 92sv/93sv/94sv/95sv (Carbon Series) $399.99
PED4800-12-C Pre-Cut for Garmin 820/820xs/840/840xs (Carbon Series) $429.99
PED4800-20-C Pre-Cut for Garmin 7408/7408xsv/7608/7608xsv(Carbon Series) $429.99
PED4900-04-C Pre-Cut for Garmin echoMAP 92sv/93sv/94sv/95sv (Carbon Series) $439.99
PED5050-19-C Pre-Cut for Garmin 7410/7410xsv/7610/7610xsv (Carbon Series) $459.99
PED5200-12-C Pre-Cut for Garmin 7412/7412xsv/7612/7612xsv (Carbon Series) $529.99
PED4400-09-C Pre-Cut for Garmin GPSMAP 742xs/742/722xs/722(Carbon Series) $299.99
PED4500-08-C Pre-Cut for Garmin GPSMAP 942xs/942/922xs/922(Carbon Series) $319.99
PED4900-11-C Pre-Cut for Garmin GPSMAP 1042xsv/1022xsv/1022 (Carbon Series) $439.99
PED5200-13-C Pre-Cut for Garmin GPSMAP 1242xsv/1222xsv/1222(Carbon Series) $529.99
continuedPart number MSRP US$
*Requires Flush Mount Kit Garmin, Part Number: 010-12440-02**Requires Flush Mount Kit Garmin, Part Number: 010-12440-01† Instruments that require a 3.6” round hole cut out. The majority of most 110mm (4.3” x 4.3”) instruments.
SystemPods Pre-Cut for GarminGP1040-20 Pre-Cut for Garmin 7408/7408xsv/7608/7608xsv and 1 inst.† for 9.5” wide guard $459.99
GP1040-23 Pre-Cut for Garmin 7408/7408xsv/7608/7608xsv and space for 9.5” wide guard $459.99
GP1080-07 Pre-Cut for Garmin 7408/7408xsv/7608/7608xsv and 2 inst. † for 9.5” wide guard $529.99
GP1080-19 Pre-Cut for Garmin 7410/7410xsv/7610/7610xsv and 2 inst. † for 9.5” wide guard $529.99
GP1088 Pre-Cut for Garmin 820/820xs/840/840xs/6008/6208 and 2 inst.† for 9.5” wide guard $529.99
GP1170-06 Pre-Cut for Garmin 1020/1020xs/1040xs and 2 inst. † for 9.5” wide guard $529.99
GP1170-12 Pre-Cut for Garmin 7412/7412xsv/7612/7612xsv and 2 inst. † for 9.5” wide guard $529.99
GP1501 Pre-Cut for Garmin 7407/7407xsv/7607/7607xsv/720/721/740/740s/741/721xs and space for 9.5” wide guard
$329.99
GP1511 Pre-Cut for Garmin 7407/7407xsv/7607/7607xsv/720/721/740/740s/741/721xs/741x-s/70s/70dv and 1 inst. † for 9.5” wide guard
$329.99
GP1603 Pre-Cut for Garmin 7407/7407xsv/7607/7607xsv/720/721/740/740s/741/721xs and 2 Inst.† for 9.5” wide guard
$429.99
GP2040-11 Pre-Cut for Garmin 8008/8208 and 1 inst.† for 12” wide guard $459.99
GP2040-20 Pre-Cut for Garmin 7408/7408xsv/7608/7608xsv and 1 inst. † for 12” wide guard $459.99
GP2040-23 Pre-Cut for Garmin 7408/7408xsv/7608/7608xsv and space on left for 12” wide guard $459.99
GP2040-29 Pre-Cut for Garmin 820/820xs/840/840xs/6008/6208 and space for 12” wide guard $459.99
GP2048 Pre-Cut for Garmin 820/820xs/840/840xs/6008/6208 and 1 inst. † for 12” wide guard $459.99
GP2080-07 Pre-Cut for Garmin 7408/7408xsv/7608/7608xsv and 2 inst.† for 12” wide guard $529.99
GP2080-19 Pre-Cut for Garmin 7410/7410xsv/7610/7610xsv and 2 inst. † for 12” wide guard $529.99
GP2088 Pre-Cut for Garmin 820/820xs/840/840xs/6008/6208 and 2 inst. † for 12” wide guard $529.99
continued
SystemPod Pre-Cut for GarminGP2170-06 Pre-Cut for Garmin 1020/1020xs/1040xs and 2 inst.* for 12” wide guard $529.99
GP2170-12 Pre-Cut for Garmin 7412/7412xsv/7612/7612xsv and 2 inst.* for 12” wide guard $529.99
GP2501 Pre-Cut for Garmin Garmin 7407/7407xsv/7607/7607xsv/720/721/740/740s/741/721x-s/741xs/70s/70dv and space for 12” wide guard
$329.99
GP2511 Pre-Cut for Garmin 7407/7407xsv/7607/7607xsv/720/721/740/740s/741/721xs/741x-s/70s/70dv and 1 inst.* for 12” wide guard
$329.99
GP2603 Pre-Cut for Garmin 7407/7407xsv/7607/7607xsv/720/721/740/740s/741/721xs and 2 inst. * for 12” wide guard
$429.99
GP1040-32 Pre-Cut for Garmin GPSMAP 1042xsv/1022xsv/1022 and space for 9.5” wide guard $459.99
GP1040-33 Pre-Cut for Garmin GPSMAP 1042xsv/1022xsv/1022 and 1 inst.* for 9.5” wide guard $459.99
GP1040-40 Pre-Cut for Garmin GPSMAP 942xs/942/922xs/922 and space for 9.5” wide guard $459.99
GP1040-41 Pre-Cut for Garmin GPSMAP 942xs/942/922xs/922 and 1 inst.* for 9.5” wide guard $459.99
GP1170-07 Pre-Cut for Garmin GPSMAP 1242xsv/1222xsv/1222 and 2 inst.* for 9.5” wide guard $529.99
GP1500-09 Pre-Cut for Garmin GPSMAP 742xs/742/722xs/722 and space for 9.5” wide guard $329.99
GP1500-29 Pre-Cut for Garmin GPSMAP 742xs/742/722xs/722 and 1 inst.* for 9.5” wide guard $329.99
GP1600-16 Pre-Cut for Garmin GPSMAP 742xs/742/722xs/722 and 2 inst.* for 9.5” wide guard $429.99
GP2040-32 Pre-Cut for Garmin GPSMAP 1042xsv/1022xsv/1022 and space for 12” wide guard $459.99
GP2040-33 Pre-Cut for Garmin GPSMAP 1042xsv/1022xsv/1022 and 1 inst. * for 12” wide guard $459.99
GP2040-40 Pre-Cut for Garmin GPSMAP 942xs/942/922xs/922 and space for 12” wide guard $459.99
GP2040-41 Pre-Cut for Garmin GPSMAP 942xs/942/922xs/922 and 1 inst.* for 12” wide guard $459.99
GP2170-07 Pre-Cut for Garmin GPSMAP 1242xsv/1222xsv/1222 and 2 inst.* for 12” wide guard $529.99
GP2500-09 Pre-Cut for Garmin GPSMAP 742xs/742/722xs/722 and space for 12” wide guard $329.99
GP2500-29 Pre-Cut for Garmin GPSMAP 742xs/742/722xs/722 and 1 inst.* for 12” wide guard $329.99
GP2600-16 Pre-Cut for Garmin GPSMAP 742xs/742/722xs/722 and 2 inst.* for 12” wide guard $429.99
Part number MSRP US$
* Instruments that require a 3.6” round hole cut out. The majority of most 110mm (4.3” x 4.3”) instruments.
Page 4
Railmount NavPods Pre-Cut for GarminRMX4401 Pre-Cut for Garmin 7407/7407xsv/7607/7607xsv/720/721/740s/741/721xs/741xs/70s/70dv $459.99
RMX4800-12 Pre-Cut for Garmin 820/820xs/840/840xs $569.99
RMX4800-20 Pre-Cut for Garmin 7408/7408xsv/7608/7608xsv $569.99
RMX4811 Pre-Cut for Garmin 8008/8208 $569.99
RMX4400-09 Pre-Cut for Garmin GPSMAP 742xs/742/722xs/722 $459.99
RMX4500-08 Pre-Cut for Garmin GPSMAP 942xs/942/922xs/922 $469.99
RMX4900-11 NavPod for Garmin GPSMAP 1042xsv/1022xsv/1022* $569.99
SailPods Pre-Cut for GarminGP1050-19 Pre-Cut for Garmin 7410/7410xsv/7610/7610xsv for 9.5” wide guard $429.99
GP1200-12 Pre-Cut for Garmin 7412/7412xsv/7612/7612xsv 9.5" wide guard $429.99
GP1201 Pre-Cut for Garmin 1020/1020xs/1040xs for 9.5" wide guard $429.99
GP1800-12 Pre-Cut for Garmin 820/820xs/840/840xs for 9.5" wide guard $429.99
GP1800-20 Pre-Cut for Garmin 7408/7408xsv/7608/7608xsv for 9.5” wide guard $429.99
GP1811 Pre-Cut for Garmin 8008/8208 for 9.5" wide guard $429.99
GP2050-11 Pre-Cut for Garmin 8008/8208 for 12" wide guard $499.99
GP2050-12 Pre-Cut for Garmin 820/820xs/840/840xs for 12" wide guard $499.99
GP2050-19 Pre-Cut for Garmin 7410/7410xsv/7610/7610xsv for 12" wide guard $429.99
GP2050-20 Pre-Cut for Garmin 7408/7408xsv/7608/7608xsv for 12" wide guard $429.99
GP2200-12 Pre-Cut for Garmin 7412/7412xsv/7612/7612xsv 12" wide guard $429.99
GP2201 Pre-Cut for Garmin 1020/1020xs/1040xs for 12" wide guard $429.99
GP1200-13 Pre-Cut for Garmin GPSMAP 1242xsv/1222xsv/1222, for 9.5" wide guard $499.99
GP1900-11 Pre-Cut for Garmin GPSMAP 1042xsv/1022xsv/1022 for 9.5" wide guard $439.99
GP2050-22 Pre-Cut for Garmin GPSMAP 1042xsv/1022xsv/1022 for 12" wide guard $429.99
GP2200-13 Pre-Cut for Garmin GPSMAP 1242xsv/1222xsv/1222, for 12" wide guard $499.99
continuedPart number
MSRP US $
MSRP US$
Page 5
Page 6
PowerPods Pre-Cut for HumminbirdPP4500-05 Pre-Cut for Humminbird HELIX 7 Series 7 $319.99
PP4500-05-C Pre-Cut for Humminbird HELIX 7 Series 7 (Carbon Series) $319.99
PP4500-06 Pre-Cut for Humminbird 859ci/899ci/959ci/999ci $319.99
PP4500-06-C Pre-Cut for Humminbird 859ci/899ci/959ci/999ci (Carbon Series) $319.99
PP4900-02 Pre-Cut for Humminbird ONIX Series 8.4" ONIX8ci $439.99
PP4900-02-C Pre-Cut for Humminbird ONIX Series 8.4" ONIX8ci (Carbon Series) $439.99
PP5030-01 Pre-Cut for Humminbird ION Series ION 12 (12.1”) $529.99
PP5050-01 Pre-Cut for Humminbird 1100 Series 10.4"/1199ci/1159ci $459.99
PP5050-01-C Pre-Cut for Humminbird 1100 Series 10.4"/1199ci/1159ci (Carbon Series) $459.99
PP5050-02 Pre-Cut for Humminbird ONIX Series 10.4"/10ci/10ciSI/10ci NT SI $459.99
PP5050-02-C Pre-Cut for Humminbird ONIX Series 10.4"/10ci/10ci SI/10ci NT SI (Carbon Series) $459.99
PP5060-01 Pre-Cut for Humminbird ION Series ION 10 (10.4") $529.99
PP5100-01 Pre-Cut for Humminbird HELIX 10 & HELIX 9 Series $399.99
PP5100-01-C Pre-Cut for Humminbird HELIX 10 & HELIX 9 Series (Carbon Series) $399.99
PP5200-01 Pre-Cut for Humminbird HELIX 12 $529.99
PP5200-01-C Pre-Cut for Humminbird HELIX 12 (Carbon Series) $529.99
PedestalPods Pre-Cut for HumminbirdPED4500-05-C Pre-Cut for Humminbird HELIX 7 Series 7 (Carbon Series) $319.99
PED4500-06-C Pre-Cut for Humminbird 859ci/899ci/959ci/999ci (Carbon Series) $319.99
PED4900-02-C Pre-Cut for Humminbird ONIX Series 8.4" ONIX8ci (Carbon Series) $439.99
PED5050-01-C Pre-Cut for Humminbird 1100 Series 10.4"/1199ci/1159ci (Carbon Series) $459.99
PED5200-01-C Pre-Cut for Humminbird HELIX 12 (Carbon Series) $529.99
PED5100-01-C Pre-Cut for Humminbird HELIX 10 & HELIX 9 Series (Carbon Series) $399.99
Part number MSRP US$
PowerPods Pre-Cut for LowrancePP4403 Pre-Cut for Lowrance HDS-7 MFD Gen2 Touch & HDS-7 Gen3 $299.99
PP4403-C Pre-Cut for Lowrance HDS-7 MFD Gen2 Touch & HDS-7 Gen3(Carbon Series) $299.99
PP4500-03 Pre-Cut for Lowrance Elite-7 CHIRP 7" Fishfi nder/Chartplotter $319.99
PP4500-03-C Pre-Cut for Lowrance Elite-7 CHIRP 7" Fishfi nder/Chartplotter(Carbon Series) $319.99
PP4500-07 Pre-Cut for Lowrance HDS-9 MFD Gen2 Touch & HDS-9 Gen3 $399.99
PP4500-07-C Pre-Cut for Lowrance HDS-9 MFD Gen2 Touch & HDS-9 Gen3(Carbon Series) $399.99
PP4600-03 Pre-Cut for Lowrance Elite-9 CHIRP 9" Fishfi nder/Chartplotter $399.99
PP4600-03-C Pre-Cut for Lowrance Elite-9 CHIRP 9" Fishfi nder/Chartplotter (Carbon Series) $399.99
PP4600-05 Pre-Cut for Lowrance HOOK-9 Fishfi nder/Chartplotter $399.99
PP4600-05-C Pre-Cut for Lowrance HOOK-9 Fishfi nder/Chartplotter (Carbon Series) $399.99
PP4900-03 Pre-Cut for Lowrance Elite-9 CHIRP 9” Fishfi nder/Chartplotter $439.99
PP4900-03-C Pre-Cut for Lowrance Elite-9 CHIRP 9" Fishfi nder/Chartplotter (Carbon Series) $439.99
PP5058 Pre-Cut for Lowrance HDS-12 MFD Gen2 Touch & HDS-12 Gen3 $459.99
PP5058-C Pre-Cut for Lowrance HDS-12 MFD Gen2 Touch & HDS-12 Gen3 (Carbon Series) $459.99
PP4400-10 Pre-Cut for Lowrance HOOK-7 / 7x Fishfi nder/Chartplotter $299.99
PP4400-10-C Pre-Cut for Lowrance HOOK-7 / 7x Fishfi nder/Chartplotter (Carbon Series) $299.99
PedestalPods Pre-Cut for LowrancePED4403-C Pre-Cut for Lowrance HDS-7 MFD Gen2 Touch & HDS-7 Gen3 (Carbon Series) $299.99
PED4500-03-C Pre-Cut for Lowrance Elite-7 CHIRP 7" Fishfi nder/Chartplotter(Carbon Series) $319.99
PED4500-07-C Pre-Cut for Lowrance HDS-9 MFD Gen2 Touch & HDS-9 Gen3(Carbon Series) $399.99
PED4600-03-C Pre-Cut for Lowrance Elite-9 CHIRP 9" Fishfi nder/Chartplotter (Carbon Series) $399.99
PED4600-05-C Pre-Cut for Lowrance HOOK-9 Fishfi nder/Chartplotter (Carbon Series) $399.99
PED4900-03-C Pre-Cut for Lowrance Elite-9 CHIRP 9" Fishfi nder/Chartplotter (Carbon Series) $439.99
PED5058-C Pre-Cut for Lowrance HDS-12 MFD Gen2 Touch & HDS-12 Gen3 (Carbon Series) $459.99
PED4400-10-C Pre-Cut for Lowrance HOOK-7 / 7x Fishfi nder/Chartplotter (Carbon Series) $299.99
Page 7
Part number MSRP US$
Page 8
PowerPods Pre-Cut for RaymarinePP4402 Pre-Cut for Raymarine e7/e7D $299.99
PP4402-C Pre-Cut for Raymarine e7/e7D(Carbon Series) $299.99
PP4404 Pre-Cut for Raymarine a75/a77/a78 $299.99
PP4404-C Pre-Cut for Raymarine a75/a77/a78(Carbon Series) $299.99
PP4500-02 Pre-Cut for Raymarine eS75/eS77/eS78 $319.99
PP4500-02-C Pre-Cut for Raymarine eS75/eS77/eS78(Carbon Series) $319.99
PP4814 Pre-Cut for Raymarine a95/a97/a98 $429.99
PP4814-C Pre-Cut for Raymarine a95/a97/a98 (Carbon Series) $429.99
PP4900-01 Pre-Cut for Raymarine eS95/eS97/eS98 $439.99
PP4900-01-C Pre-Cut for Raymarine eS95/eS97/eS98 (Carbon Series) $439.99
PP4900-09 Pre-Cut for Raymarine c95/c97/e95/e97 $439.99
PP4900-09-C Pre-Cut for Raymarine c95/c97/e95/e97 (Carbon Series) $439.99
PP5031 Pre-Cut for Raymarine C120W/E120W $529.99
PP5052 Pre-Cut for Raymarine C90W/E90W $459.99
PP5052-C Pre-Cut for Raymarine C90W/E90W (Carbon Series) $459.99
PP5061 Pre-Cut for Raymarine C120/E120 $529.99
PP5203 Pre-Cut for Raymarine c125/c127/e125/e127 $529.99
PP5203-C Pre-Cut for Raymarine c125/c127/e125/e127 (Carbon Series) $529.99
PP5204 Pre-Cut for Raymarine a125/a127/a128 $529.99
PP5204-C Pre-Cut for Raymarine a125/a127/a128 (Carbon Series) $529.99
PP5205 Pre-Cut for Raymarine eS127/eS128 $529.99
PP5205-C Pre-Cut for Raymarine eS127/eS128 (Carbon Series) $529.99
PP5213 Pre-Cut for Raymarine gS125 $529.99
PP5213-C Pre-Cut for Raymarine gS125 (Carbon Series) $529.99
Part number MSRP US$
for 3 or 4 instrumentsPedestalPods Pre-Cut for RaymarinePED4402-C Pre-Cut for Raymarine e7/e7D(Carbon Series) $299.99
PED4404-C Pre-Cut for Raymarine a75/a77/a78 (Carbon Series) $299.99
PED4500-02-C Pre-Cut for Raymarine eS75/eS77/eS78(Carbon Series) $319.99
PED4814-C Pre-Cut for Raymarine a95/a97/a98(Carbon Series) $429.99
PED4900-01-C Pre-Cut for Raymarine eS95 / eS97 / eS98 (Carbon Series) $439.99
PED4900-09-C Pre-Cut for Raymarine c95/c97, e95/e97 for 9.5" wide guard(Carbon Series) $439.99
PED5205-C Pre-Cut for Raymarine eS127/eS128 (Carbon Series) $529.99
PowerPods Pre-Cut for RaymarinePP4402 Pre-Cut for Raymarine e7/e7D $299.99
PP4402-C Pre-Cut for Raymarine e7/e7D(Carbon Series) $299.99
PP4404 Pre-Cut for Raymarine a75/a77/a78 $299.99
PP4404-C Pre-Cut for Raymarine a75/a77/a78(Carbon Series) $299.99
PP4500-02 Pre-Cut for Raymarine eS75/eS77/eS78 $319.99
PP4500-02-C Pre-Cut for Raymarine eS75/eS77/eS78(Carbon Series) $319.99
PP4814 Pre-Cut for Raymarine a95/a97/a98 $429.99
PP4814-C Pre-Cut for Raymarine a95/a97/a98 (Carbon Series) $429.99
PP4900-01 Pre-Cut for Raymarine eS95/eS97/eS98 $439.99
PP4900-01-C Pre-Cut for Raymarine eS95/eS97/eS98 (Carbon Series) $439.99
PP4900-09 Pre-Cut for Raymarine c95/c97/e95/e97 $439.99
PP4900-09-C Pre-Cut for Raymarine c95/c97/e95/e97 (Carbon Series) $439.99
PP5031 Pre-Cut for Raymarine C120W/E120W $529.99
PP5052 Pre-Cut for Raymarine C90W/E90W $459.99
PP5052-C Pre-Cut for Raymarine C90W/E90W (Carbon Series) $459.99
PP5061 Pre-Cut for Raymarine C120/E120 $529.99
PP5203 Pre-Cut for Raymarine c125/c127/e125/e127 $529.99
PP5203-C Pre-Cut for Raymarine c125/c127/e125/e127 (Carbon Series) $529.99
PP5204 Pre-Cut for Raymarine a125/a127/a128 $529.99
PP5204-C Pre-Cut for Raymarine a125/a127/a128 (Carbon Series) $529.99
PP5205 Pre-Cut for Raymarine eS127/eS128 $529.99
PP5205-C Pre-Cut for Raymarine eS127/eS128 (Carbon Series) $529.99
PP5213 Pre-Cut for Raymarine gS125 $529.99
PP5213-C Pre-Cut for Raymarine gS125 (Carbon Series) $529.99
Page 9
SystemPods Pre-Cut for RaymarineGP1040-14 Pre-Cut for Raymarine a95/a97/a98 and 1 inst.* for 9.5” wide guard $459.99
GP1040-15 Pre-Cut for Raymarine c95/c97/e95/e97 and 1 inst.* for 9.5” wide guard $459.99
GP1040-19 Pre-Cut for Raymarine eS95 / eS97 / eS98 and 1 inst.* for 9.5” wide guard $459.99
GP1040-22 Pre-Cut for Raymarine eS95 / eS97 / eS98 and space for 9.5” wide guard $459.99
GP1049 Pre-Cut for Raymarine c95/c97/e95/e97 and space for 9.5” wide guard $459.99
GP1080-06 Pre-Cut for Raymarine eS95 / eS97 / eS98 and 2 inst.* for 9.5” wide guard $529.99
GP1080-14 Pre-Cut for Raymarine a95/a97/a98 and 2 inst.* for 9.5” wide guard $529.99
GP1082 Pre-Cut for Raymarine c95/c97/e95/e97 and 2 inst.* for 9.5” wide guard $529.99
GP1170-04 Pre-Cut for Raymarine a125/a127/a128 and 2 inst.* for 9.5” wide guard $529.99
GP1170-05 Pre-Cut for Raymarine eS127/eS128 and 2 inst* for 9.5” wide guard $529.99
GP1170-09 Pre-Cut for Raymarine a95/a97/a98 and four instruments for 9.5” wide guard $529.99
GP1170-14 Pre-Cut for Raymarine eS95 / eS97 / eS98 and 4 inst. holes* for 9.5” wide guard $529.99
GP1174 Pre-Cut for Raymarine c125/c127/e125/e127 and 2 inst.* for 9.5” wide guard $529.99
GP1502 Pre-Cut for Raymarine e7/e7D and space for 9.5” wide guard $329.99
GP1503 Pre-Cut for Raymarine a75/a77/a78 and space for 9.5” wide guard $329.99
GP1504 Pre-Cut for Raymarine eS75/eS77/eS78 and space for 9.5” wide guard $329.99
GP1507 Pre-Cut for Raymarine a65/a67/a68 and space for 9.5” wide guard $329.99
GP1512 Pre-Cut for Raymarine e7/e7D and 1 inst.* for 9.5” wide guard $329.99
GP1513 Pre-Cut for Raymarine a75/a77/a78 and 1 inst.* for 9.5” wide guard $329.99
GP1514 Pre-Cut for Raymarine eS75/eS77/eS78 and 1 inst.* for 9.5” wide guard $329.99
GP1517 Pre-Cut for Raymarine a65/a67/a68 and 1 inst.* for 9.5” wide guard $329.99
GP1600-04 Pre-Cut for Raymarine eS75/eS77/eS78 and 2 inst.* for 9.5” wide guard $429.99
GP1604 Pre-Cut for Raymarine e7/e7D and 2 inst.* for 9.5” wide guard $429.99
GP1605 Pre-Cut for Raymarine a75/a77/a78 and 2 inst.* for 9.5” wide guard $429.99
GP2040-14 Pre-Cut for Raymarine a95/a97/a98 and 1 inst.* for 12” wide guard $459.99
GP2040-15 Pre-Cut for Raymarine c95/c97/e95/e97 and 1 inst.* for 12” wide guard $459.99
GP2040-19 Pre-Cut for Raymarine eS95/eS97/eS98 and 1 inst.* for 12” wide guard $459.99
GP2040-22 Pre-Cut for Raymarine eS95 / eS97 / eS98 and space on left for 12” wide guard $459.99
GP2040-95 Pre-Cut for Raymarine gS95 Glass Bridge and space for 12” wide guard $459.99
GP2049 Pre-Cut for Raymarine c95/c97/e95/e97 and space for 12” wide guard $459.99
GP2080-06 Pre-Cut for Raymarine eS95 / eS97 / eS98 and 2 inst.* for 12” wide guard $529.99
GP2080-14 Pre-Cut for Raymarine a95/a97/a98 and 2 inst.* for 12” wide guard $529.99
GP2081 Pre-Cut for Raymarine C90W/E90W and 2 inst.* for 12” wide guard $529.99
GP2082 Pre-Cut for Raymarine c95/c97/e95/e97 and 2 inst.* for 12” wide guard $529.99
GP2170-04 Pre-Cut for Raymarine a125/a127/a128 and 2 inst.* for 12” wide guard $529.99
GP2170-05 Pre-Cut for Raymarine eS127/eS128 and 2 inst.* for 12” wide guard $529.99
GP2170-09 Pre-Cut for Raymarine a95/a97/a98 and four instruments for 12” wide guard $529.99
GP2170-14 Pre-Cut for Raymarine eS95 / eS97 / eS98 and 4 inst. holes* for 12” wide guard $529.99
GP2173 Pre-Cut for Raymarine C120W/E120W and 2 inst.* for 12” wide guard $529.99* Instruments that require a 3.6” round hole cut out. The majority of most 110mm (4.3” x 4.3”) instruments.
continuedPart number MSRP US$
SystemPods Pre-Cut for RaymarineGP2174 Pre-Cut for Raymarine c125/c127/e125/e127 and 2 inst.* for 12” wide guard $529.99
GP2502 Pre-Cut for Raymarine e7/e7D and space for 12” wide guard $329.99
GP2503 Pre-Cut for Raymarine a75/a77/a78 and space for 12” wide guard $329.99
GP2504 Pre-Cut for Raymarine eS75/eS77/eS78 and space for 12” wide guard $329.99
GP2507 Pre-Cut for Raymarine a65/a67/a68 and space for 12” wide guard $329.99
GP2512 Pre-Cut for Raymarine e7/e7D and 1 inst.* for 12” wide guard $329.99
GP2513 Pre-Cut for Raymarine a75/a77/a78 and 1 inst.* for 12” wide guard $329.99
GP2514 Pre-Cut for Raymarine eS75/eS77/eS78 and 1 inst.* for 12” wide guard $329.99
GP2517 Pre-Cut for Raymarine a65/a67/a68 and 1 inst.* for 12” wide guard $329.99
GP2600-04 Pre-Cut for Raymarine eS75/eS77/eS78 and 2 inst.* for 12” wide guard $429.99
GP2600-09 Pre-Cut for Raymarine a65/a67/a68 and 2 inst.* for 12” wide guard $429.99
GP2604 Pre-Cut for Raymarine e7/e7D and 2 inst.* for 12” wide guard $429.99
GP2605 Pre-Cut for Raymarine a75/a77/a78 and 2 inst.* for 12” wide guard $429.99
SailPods Pre-Cut for RaymarineGP1061 Pre-Cut for Raymarine C120/E120 for 9.5” wide guard $499.99
GP1203 Pre-Cut for Raymarine c125/c127/e125/e127 for 9.5” wide guard $499.99
GP1204 Pre-Cut for Raymarine a125/a127/a128 for 9.5” wide guard $499.99
GP1205 Pre-Cut for Raymarine eS127/eS128 for 9.5” wide guard $499.99
GP1213 Pre-Cut for Raymarine gS125 Glass Bridge for 9.5” wide guard $499.99
GP1809 Pre-Cut for Raymarine c95/c97/e95/e97 for 9.5” wide guard $429.99
GP1814 Pre-Cut for Raymarine a95/a97/a98 for 9.5” wide guard $429.99
GP1900-01 Pre-Cut for Raymarine eS95 / eS97 / eS98 for 9.5” wide guard $439.99
GP1900-09 Pre-Cut for Raymarine c95/c97, e95/e97 for 9.5” wide guard $439.99
GP2031 Pre-Cut for Raymarine C120W/E120W for 12” wide guard $499.99
GP2050-14 Pre-Cut for Raymarine a95/a97/a98 for 12” wide guard $429.99
GP2050-95 Pre-Cut for Raymarine gS95 Glass Bridge for 12” wide guard $429.99
GP2050-98 Pre-Cut for Raymarine eS95 / eS97 / eS98 for 12” wide guard $429.99
GP2051 Pre-Cut for Raymarine C80/E80 (Classic) for 12” wide guard $429.99
GP2052 Pre-Cut for Raymarine C90W/E90W for 12” wide guard $429.99
GP2059 Pre-Cut for Raymarine c95/c97/e95/e97 for 12” wide guard $429.99
GP2061 Pre-Cut for Raymarine C120/E120 for 12” wide guard $499.99
GP2203 Pre-Cut for Raymarine c125/c127/e125/e127 for 12” wide guard $499.99
GP2204 Pre-Cut for Raymarine a125/a127/a128 for 12” wide guard $499.99
GP2205 Pre-Cut for Raymarine eS127/eS128 for 12” wide guard $499.99
Part number MSRP US$
continued
Page 10
* Instruments that require a 3.6” round hole cut out. The majority of most 110mm (4.3” x 4.3”) instruments.
Railmounts Pre-Cut for RaymarineRMX4402 Pre-Cut for Raymarine e7/e7D $459.99
RMX4404 Pre-Cut for Raymarine a75/a77/a78 $459.99
RMX4500-02 Pre-Cut for Raymarine eS75/eS77/eS78 $469.99
RMX4809 Pre-Cut for Raymarine c95/c97/e95/e97 $569.99
RMX4814 Pre-Cut for Raymarine a95/a97/a98 $569.99
RMX4900-01 Pre-Cut for Raymarine eS95 / eS97 / eS98 $569.99
RMX4900-09 Pre-Cut for Raymarine c95/c97, e95/e97 $569.99
PowerPods Pre-Cut for SimradPP4102 Pre-Cut for one Simrad IS42 / B&G Triton²/AP44 square hole instrument $289.99
PP4406 Pre-Cut for Simrad NSS7 evo² $299.99
PP4406-C Pre-Cut for Simrad NSS7 evo² (Carbon Series) $299.99
PP4407 Pre-Cut for Simrad NSS7 $299.99
PP4407-C Pre-Cut for Simrad NSS7(Carbon Series) $299.99
PP4408 Pre-Cut for Simrad † GO7 $299.99
PP4408-C Pre-Cut for Simrad † GO7(Carbon Series) $299.99
PP4600-04 Pre-Cut for Simrad NSS9 evo² $399.99
PP4600-04-C Pre-Cut for Simrad NSS9 evo²(Carbon Series) $399.99
PP4800-13 Pre-Cut Simrad GO9 $429.99
PP4800-13-C Pre-Cut Simrad GO9(Carbon Series) $429.99
PP4808 Pre-Cut for Simrad NSS8 $429.99
PP4808-C Pre-Cut for Simrad NSS8 (Carbon Series) $429.99
PP4900-13 Pre-Cut for Simrad NSS9 evo² $439.99
PP4900-13-C Pre-Cut for Simrad NSS9 evo² (Carbon Series) $439.99
PP5059 Pre-Cut for Simrad NSE8 $459.99
PP5063 Pre-Cut for Simrad NSS12 $529.99
PP5064 Pre-Cut for Simrad NSE12 $529.99
PP5202 Pre-Cut for Simrad NSS12 evo² $529.99
PP5202-C Pre-Cut for Simrad NSS12 evo²(Carbon Series) $529.99
Part number MSRP US$
continued
Page 11
† Panel Mount
Page 12
continued
PED4406-C Pre-Cut for Simrad NSS7 evo²(Carbon Series) $299.99
PED4407-C Pre-Cut for Simrad NSS7(Carbon Series) $299.99
PED4408-C Pre-Cut for Simrad † GO7(Carbon Series) $299.99
PED4600-04-C Pre-Cut for Simrad NSS9 evo²(Carbon Series) $399.99
PED4800-13-C Pre-Cut for Simrad GO9(Carbon Series) $429.99
PED4808-C Pre-Cut for Simrad NSS8(Carbon Series) $429.99
PED4900-13-C Pre-Cut for Simrad NSS9 evo²(Carbon Series) $439.99
PED5059-C Pre-Cut for Simrad NSE8(Carbon Series) $459.99
PED4500-09-C Pre-Cut for Simrad NSS7 evo3 (Carbon Series) $319.99
PED4600-06-C Pre-Cut for Simrad NSS9 evo3 (Carbon Series) $399.99
PED5202-14-C Pre-Cut for Simrad NSS12 evo3 (Carbon Series) $529.99
PedestalPods Pre-Cut for Simrad
SystemPods Pre-Cut for SimradGP1040-07 Pre-Cut for Simrad NSS7 and space for 9.5” wide guard $459.99
GP1040-08 Pre-Cut for Simrad NSS8 and space for 9.5” wide guard $459.99
GP1040-13 Pre-Cut for Simrad NSS9 evo² and 1 inst.* for 9.5” wide guard $459.99
GP1040-21 Pre-Cut for Simrad NSS9 evo²and space for 9.5” wide guard $459.99
GP1040-30 Pre-Cut for Simrad NSS9 evo² and 1 inst.** for 9.5” wide guard $459.99
GP1040-31 Pre-Cut Simrad GO9 and 1 inst.** for 9.5” wide guard $459.99
GP1080-08 Pre-Cut for Simrad NSS8 and 2 inst.* for 9.5” wide guard $529.99
GP1080-09 Pre-Cut for Simrad NSS8 and 2 inst.** for 9.5” wide guard $529.99
GP1080-13 Pre-Cut for Simrad NSS9 evo² and 2 inst.* for 9.5” wide guard $529.99
GP1080-20 Pre-Cut for Simrad NSS9 evo² and 2 inst.** for 9.5” wide guard $529.99
GP1170-15 Pre-Cut for Simrad NSS12 evo² and 2 inst.** for 9.5” wide guard $529.99
GP1170-63 Pre-Cut for Simrad NSS12 and 2 inst.* for 9.5” wide guard $529.99$529.99
* Instruments that require a 3.6” round hole cut out. The majority of most 110mm (4.3” x 4.3”) instruments. ** Square cut out provided for Simrad IS42/AP44 Instruments.† Panel Mount
PowerPods Pre-Cut for Simrad PP4500-09 Pre-Cut for Simrad NSS7 evo3 $319.99
PP4500-09-C Pre-Cut for Simrad NSS7 evo3 (Carbon Series) $319.99
PP4600-06 Pre-Cut for Simrad NSS9 evo3 $399.99
PP4600-06-C Pre-Cut for Simrad NSS9 evo3 (Carbon Series) $399.99
PP5200-14 Pre-Cut for Simrad NSS12 evo3 $529.99
PP5200-14-C Pre-Cut for Simrad NSS12 evo3 (Carbon Series) $529.99
Part number MSRP US$
SystemPods Pre-Cut for SimradGP1170-64 Pre-Cut for Simrad NSS12 and 2 inst.** for 9.5” wide guard $529.99
GP1176 Pre-Cut for Simrad NSS12 evo² and 2 inst.* for 9.5” wide guard $529.99
GP1500-16 Pre-Cut for Simrad NSS7 evo² and 1 inst.** for 9.5” wide guard $329.99
GP1500-17 Pre-Cut for Simrad † GO7 and 1 inst.** for 9.5” wide guard $329.99
GP1506 Pre-Cut for Simrad NSS7 evo² and space for 9.5” wide guard $329.99
GP1508 Pre-Cut for Simrad † GO7 and space for 9.5” wide guard $329.99
GP1516 Pre-Cut for Simrad NSS7 evo² and 1 inst.* for 9.5” wide guard $329.99
GP1518 Pre-Cut for Simrad † GO7 and 1 inst.* for 9.5” wide guard $329.99
GP1600-10 Pre-Cut for Simrad NSS7 and 2 inst.* for 9.5” wide guard $429.99
GP1600-11 Pre-Cut for Simrad NSS7 and 2 inst.** for 9.5” wide guard $429.99
GP1600-12 Pre-Cut for Simrad NSS7 evo² and 2 inst.** for 9.5” wide guard $429.99
GP1600-13 Pre-Cut for Simrad † GO7 and 2 inst.** for 9.5” wide guard $429.99
GP1606 Pre-Cut for Simrad NSS7 evo² and 2 inst.* for 9.5” wide guard $429.99
GP1608 Pre-Cut for Simrad † GO7 and 2 inst.* for 9.5” wide guard $429.99
GP2040-07 Pre-Cut for Simrad NSS7 and space for 12” wide guard $459.99
GP2040-08 Pre-Cut for Simrad NSS8 and space for 12” wide guard $459.99
GP2040-13 Pre-Cut for Simrad NSS9 evo² and 1 inst.* for 12” wide guard $459.99
GP2040-21 Pre-Cut for Simrad NSS9 evo² and space for 12” wide guard $459.99
GP2040-30 Pre-Cut for Simrad NSS9 evo² and 1 inst.** for 12” wide guard $459.99
GP2040-31 Pre-Cut Simrad GO9 and 1 inst.** for 12” wide guard $459.99
GP2080-08 Pre-Cut for Simrad NSS8 and 2 inst.* for 12” wide guard $529.99
GP2080-09 Pre-Cut for Simrad NSS8 and 2 inst.** for 12” wide guard $529.99
GP2080-13 Pre-Cut for Simrad NSS9 evo² and 2 inst.* for 12” wide guard $529.99
GP2080-20 Pre-Cut for Simrad NSS9 evo² and 2 inst.** for 12” wide guard $529.99
GP2170-15 Pre-Cut for Simrad NSS12 evo² and 2 inst.** for 12” wide guard $529.99
Part number MSRP US$
continued
* Instruments that require a 3.6” round hole cut out. The majority of most 110mm (4.3” x 4.3”) instruments. ** Square cut out provided for Simrad IS42/AP44 Instruments.† Panel Mount
Page 13
Page 14
GP2170-63 Pre-Cut for Simrad NSS12 and 2 inst.* for 12” wide guard $529.99
GP2170-64 Pre-Cut for Simrad NSS12 and 2 inst.** for 12” wide guard $529.99
GP2176 Pre-Cut for Simrad NSS12 evo² and 2 inst.* for 12” wide guard $529.99
GP2500-16 Pre-Cut for Simrad NSS7 evo² and 1 inst.** for 12” wide guard $329.99
GP2500-17 Pre-Cut for Simrad † GO7 and 1 inst.** for 12” wide guard $329.99
GP2506 Pre-Cut for Simrad NSS7 evo² and space for 12” wide guard $329.99
GP2508 Pre-Cut for Simrad † GO7 and space for 12” wide guard $329.99
GP2516 Pre-Cut for Simrad NSS7 evo² and 1 inst.* for 12” wide guard $329.99
GP2518 Pre-Cut for Simrad † GO7 and 1 inst.* for 12” wide guard $329.99
GP2600-10 Pre-Cut for Simrad NSS7 and 2 inst.* for 12” wide guard $429.99
GP2600-11 Pre-Cut for Simrad NSS7 and 2 inst.** for 12” wide guard $429.99
GP2600-12 Pre-Cut for Simrad NSS7 evo² and 2 inst.** for 12” wide guard $429.99
GP2600-13 Pre-Cut for Simrad † GO7 and 2 inst.** for 12” wide guard $429.99
GP2608 Pre-Cut for Simrad † GO7 and 2 inst.* for 12” wide guard $429.99
GP1040-05 Pre-Cut for Simrad NSS9 evo3 1 inst.* for 9.5” wide guard $459.99
GP1040-06 Pre-Cut for Simrad NSS9 evo3 and 1 inst.** for 9.5” wide guard $459.99
GP1040-34 Pre-Cut for Simrad NSS9 evo3 / B&G Zeus3 9 and space for 9.5” wide guard $459.99
GP1170-16 Pre-Cut for Simrad NSS12 evo3 / B&G Zeus3 12 and 2 inst.* for 9.5” wide guard $529.99
GP1170-17 Pre-Cut for Simrad NSS12 evo3 and 2 inst.** for 9.5” wide guard $529.99
GP1500-30 Pre-Cut for Simrad NSS7 evo3 and 1 inst.* for 9.5” wide guard $329.99
GP1500-31 Pre-Cut for Simrad NSS7 evo3 and 1 inst.** for 9.5” wide guard $329.99
GP1500-32 Pre-Cut for Simrad NSS7 evo3 and space for 9.5” wide guard $329.99
GP1600-14 Pre-Cut for Simrad NSS7 evo3 and 2 inst.* for 9.5” wide guard $429.99
GP1600-15 Pre-Cut for Simrad NSS7 evo3 and 2 inst.** for 9.5” wide guard $429.99
GP2040-05 Pre-Cut for Simrad NSS9 evo3 and 1 inst.* for 12” wide guard $459.99
GP2040-06 Pre-Cut for Simrad NSS9 evo3 and 1 inst.** for 12” wide guard $459.99
GP2040-34 Pre-Cut for Simrad NSS9 evo3 and space for 12” wide guard $459.99
GP2100-16 Pre-Cut for Simrad NSS12 evo3 and 2 inst.* for 12” wide guard $529.99
GP2170-17 Pre-Cut for Simrad NSS12 evo3 and 2 inst.** for 12” wide guard $529.99
SystemPods Pre-Cut for Simrad Part number
continued
MSRP US$
* Instruments that require a 3.6” round hole cut out. The majority of most 110mm (4.3” x 4.3”) instruments. ** Square cut out provided for Simrad IS42/AP44 Instruments.† Panel Mount
Page 15
RailMounts Pre-Cut for SimradRMX4102 Pre-Cut for one Simrad IS42 / B&G Triton²/AP44 square hole instrument $399.99
RMX4406 Pre-Cut for Simrad NSS7 evo²/B&G Zeus² 7 $459.99
RMX4407 Pre-Cut for Simrad NSS7/B&G Zeus Touch 7 $459.99
RMX4408 Pre-Cut for Simrad † GO7/B&G Vulcan7 $459.99
RMX4600-04 Pre-Cut for Simrad NSS9 evo²/B&G Zeus² 9 $499.99
RMX4800-13 Pre-Cut Simrad GO9 / B&G Vulcan9 $569.99
RMX4808 Pre-Cut for Simrad NSS8/B&G Zeus Touch 8 $569.99
RMX4900-13 Pre-Cut for Simrad NSS9 evo² / B&G Zeus² 9 (fits 1" or 1.25" tubing) $569.99
RMX4500-09 Pre-Cut for Simrad NSS7 evo3 / B&G Zeus3 7 $469.99
RMX4600-06 Pre-Cut for Simrad NSS9 evo3 / B&G Zeus3 9 $499.99
SystemPods Pre-Cut for Simrad GP2500-30 Pre-Cut for Simrad NSS7 evo3 and 1 inst.* for 12” wide guard $329.99
GP2500-31 Pre-Cut for Simrad NSS7 evo3 and 1 inst.** for 12” wide guard $329.99
GP2500-32 Pre-Cut for Simrad NSS7 evo3 and space for 12” wide guard $329.99
GP2600-14 Pre-Cut for Simrad NSS7 evo3 and 2 inst.* for 12” wide guard $429.99
GP2600-15 Pre-Cut for Simrad NSS7 evo3 and 2 inst.** for 12” wide guard $429.99
GP1059 Pre-Cut for Simrad NSE8 for 9.5” wide guard $429.99
GP1063 Pre-Cut for Simrad NSS12 for 9.5” wide guard $499.99
GP1202 Pre-Cut for Simrad NSS12 evo² for 9.5” wide guard $499.99
GP1800-13 Pre-Cut for Simrad GO9 for 9.5” wide guard $429.99
GP1807 Pre-Cut for Simrad NSS7 for 9.5” wide guard $429.99
GP1808 Pre-Cut for Simrad NSS8 for 9.5” wide guard $429.99
GP1813 Pre-Cut for Simrad NSS9 evo² for 9.5” wide guard $429.99
GP1900-13 Pre-Cut for Simrad NSS9 evo² for 9.5” wide guard $439.99
GP2050-10 Pre-Cut for Simrad NSE8 for 12” wide guard $429.99
GP2050-13 Pre-Cut for Simrad NSS9 evo² for 12” wide guard $429.99
GP2050-21 Pre-Cut for Simrad GO9 for 12” wide guard $429.99
GP2058 Pre-Cut for Simrad NSS8 for 12” wide guard $429.99
GP2063 Pre-Cut for Simrad NSS12 for 12” wide guard $499.99
GP2202 Pre-Cut for Simrad NSS12 evo² for 12” wide guard $499.99
GP1200-14 Pre-Cut for Simrad NSS12 evo3 / B&G Zeus3 12 for 9.5” wide guard $499.99
GP1900-06 Pre-Cut for Simrad NSS9 evo3 / B&G Zeus3 9 for 9.5” wide guard $439.99
GP2050-06 Pre-Cut for Simrad NSS9 evo3 / B&G Zeus² 9 for 12” wide guard $429.99
GP2200-14 Pre-Cut for Simrad NSS12 evo3 / B&G Zeus3 12 for 12” wide guard $499.99
SailPods Pre-Cut for Simrad
Part number MSRP US$
continued
* Instruments that require a 3.6” round hole cut out. The majority of most 110mm (4.3” x 4.3”) instruments. ** Square cut out provided for Simrad IS42/AP44 Instruments.† Panel Mount
PowerPods Pre-Cut for B&GPP4102 Pre-Cut for one B&G Triton²/AP44 square hole instrument $289.99
PP4406 Pre-Cut for B&G Zeus² 7 $299.99
PP4406-C Pre-Cut for B&G Zeus² 7(Carbon Series) $299.99
PP4407 Pre-Cut for B&G Zeus Touch 7 $299.99
PP4407-C Pre-Cut for B&G Zeus Touch 7(Carbon Series) $299.99
PP4408 Pre-Cut for B&G Vulcan7 $299.99
PP4408-C Pre-Cut for B&G Vulcan7(Carbon Series) $299.99
PP4600-04 Pre-Cut for B&G Zeus² 9 $399.99
PP4600-04-C Pre-Cut for B&G Zeus² 9 (Carbon Series) $399.99
PP4800-13 Pre-Cut for B&G Vulcan9 $429.99
PP4800-13-C Pre-Cut for B&G Vulcan9 (Carbon Series) $429.99
PP4808 Pre-Cut for B&G Zeus Touch 8 $429.99
PP4808-C Pre-Cut for B&G Zeus Touch 8 (Carbon Series) $429.99
PP4900-13 Pre-Cut for B&G Zeus² 9 $439.99
PP4900-13-C Pre-Cut for B&G Zeus² 9 (Carbon Series) $439.99
PP5059 Pre-Cut for B&G Zeus Z8 $459.99
PP5063 Pre-Cut for B&G Zeus Touch 12 $529.99
PP5064 Pre-Cut for B&G Zeus Z12 $529.99
PP4500-09 Pre-Cut for Simrad NSS7 evo3 $319.99
PP4500-09-C Pre-Cut for Simrad NSS7 evo3 (Carbon Series) $319.99
PP4600-06 Pre-Cut for Simrad NSS9 evo3 $399.99
PP4600-06-C Pre-Cut for Simrad NSS9 evo3 (Carbon Series) $399.99
PP5200-14 Pre-Cut for Simrad NSS12 evo3 $529.99
PP5200-14-C Pre-Cut for Simrad NSS12 evo3 (Carbon Series) $529.99
Part number
Page 16
MSRP US$
Page 17
continued
SystemPods Pre-Cut for B&GGP1040-07 Pre-Cut for B&G Zeus Touch 7 and space for 9.5” wide guard $459.99
GP1040-08 Pre-Cut for B&G Zeus Touch 8 and space for 9.5” wide guard $459.99
GP1040-13 Pre-Cut for B&G Zeus² 9 and 1 inst.* for 9.5” wide guard $459.99
GP1040-21 Pre-Cut for B&G Zeus² 9 and space for 9.5” wide guard $459.99
GP1040-30 Pre-Cut for B&G Zeus² 9 and 1 inst.** for 9.5” wide guard $459.99
GP1040-31 Pre-Cut for B&G Vulcan9, and 1 inst.** for 9.5” wide guard $459.99
GP1080-08 Pre-Cut for B&G Zeus Touch 8 and 2 inst.* for 9.5” wide guard $529.99
GP1080-09 Pre-Cut for B&G Zeus Touch 8 and 2 inst.** for 9.5” wide guard $529.99
GP1080-13 Pre-Cut for B&G Zeus² 9 and 2 inst.* for 9.5” wide guard $529.99
GP1080-20 Pre-Cut for B&G Zeus² 9 and 2 inst.** for 9.5” wide guard $529.99
GP1170-15 Pre-Cut for B&G Zeus² 12 and 2 inst.** for 9.5” wide guard $529.99
GP1170-63 Pre-Cut for B&G Zeus Touch 12 and 2 inst.* for 9.5” wide guard $529.99
GP1170-64 Pre-Cut for B&G Zeus Touch 12 and 2 inst.** for 9.5” wide guard $529.99
GP1176 Pre-Cut for B&G Zeus² 12 and 2 inst.* for 9.5” wide guard $529.99
GP1500-16 Pre-Cut for B&G Zeus² 7 and 1 inst.** for 9.5” wide guard $329.99
GP1500-17 Pre-Cut for B&G Vulcan7 and 1 inst.** for 9.5” wide guard $329.99
GP1506 Pre-Cut for B&G Zeus² 7 and space for 9.5” wide guard $329.99
GP1508 Pre-Cut for B&G Vulcan7 and space for 9.5” wide guard $329.99
GP1516 Pre-Cut for B&G Zeus² 7 and 1 inst.* for 9.5” wide guard $329.99
GP1518 Pre-Cut for B&G Vulcan7 and 1 inst.* for 9.5” wide guard $329.99
GP1600-10 Pre-Cut for B&G Zeus Touch 7 and 2 inst.* for 9.5” wide guard $429.99
GP1600-11 Pre-Cut for B&G Zeus Touch 7 and 2 inst.** for 9.5” wide guard $429.99
GP1600-12 Pre-Cut for B&G Zeus² 7 and 2 inst.** for 9.5” wide guard $429.99
GP1600-13 Pre-Cut for B&G Vulcan7 and 2 inst.** for 9.5” wide guard $429.99
GP1606 Pre-Cut for B&G Zeus² 7 and 2 inst.* for 9.5” wide guard $429.99
GP1608 Pre-Cut for B&G Vulcan7 and 2 inst.* for 9.5” wide guard $429.99
GP2040-07 Pre-Cut for B&G Zeus Touch 7 and space for 12” wide guard $459.99
GP2040-08 Pre-Cut for B&G Zeus Touch 8 and space for 12” wide guard $459.99
GP2040-13 Pre-Cut for B&G Zeus² 9 and 1 inst.* for 12” wide guard $459.99
GP2040-21 Pre-Cut for B&G Zeus² 9 and space for 12” wide guard $459.99
Part number MSRP US$
* Instruments that require a 3.6” round hole cut out. The majority of most 110mm (4.3” x 4.3”) instruments.** Square cut-out provided for B&G Triton2/ AP44 Instruments
Page 18
SystemPods Pre-Cut for B&GGP2040-30 Pre-Cut for B&G Zeus² 9 and 1 inst.** for 12” wide guard $459.99
GP2040-31 Pre-Cut for B&G Vulcan9, and 1 inst.** for 12” wide guard $459.99
GP2080-08 Pre-Cut for B&G Zeus Touch 8 and 2 inst.* for 12” wide guard $529.99
GP2080-09 Pre-Cut for B&G Zeus Touch 8 and 2 inst.** for 12” wide guard $529.99
GP2080-13 Pre-Cut for B&G Zeus² 9 and 2 inst.* for 12” wide guard $529.99
GP2080-20 Pre-Cut for B&G Zeus² 9 and 2 inst.** for 12” wide guard $529.99
GP2170-15 Pre-Cut for B&G Zeus² 12 and 2 inst.** for 12” wide guard $529.99
GP2170-63 Pre-Cut for B&G Zeus Touch 12 and 2 inst.* for 12” wide guard $529.99
GP2170-64 Pre-Cut for B&G Zeus Touch 12 and 2 inst.** for 12” wide guard $529.99
GP2176 Pre-Cut for B&G Zeus² 12 and 2 inst.* for 12” wide guard $529.99
GP2500-16 Pre-Cut for B&G Zeus² 7 and 1 inst.** for 12” wide guard $329.99
GP2500-17 Pre-Cut for B&G Vulcan7 and 1 inst.** for 12” wide guard $329.99
GP2506 Pre-Cut for B&G Zeus² 7 and space for 12” wide guard $329.99
GP2508 Pre-Cut for B&G Vulcan7 and space for 12” wide guard $329.99
GP2516 Pre-Cut for B&G Zeus² 7 and 1 inst.* for 12” wide guard $329.99
GP2518 Pre-Cut for B&G Vulcan7 and 1 inst.* for 12” wide guard $329.99
GP2600-10 Pre-Cut for B&G Zeus Touch 7 and 2 inst.* for 12” wide guard $429.99
GP2600-11 Pre-Cut for B&G Zeus Touch 7 and 2 inst.** for 12” wide guard $429.99
GP2600-12 Pre-Cut for B&G Zeus² 7 and 2 inst.** for 12” wide guard $429.99
GP2600-13 Pre-Cut for B&G Vulcan7 and 2 inst.** for 12” wide guard $429.99
GP2606 Pre-Cut for B&G Zeus² 7 and 2 inst.* for 12” wide guard $429.99
GP2608 Pre-Cut for B&G Vulcan7 and 2 inst.* for 12” wide guard $429.99
GP1040-05 Pre-Cut for B&G Zeus3 9 and 1 inst.* for 9.5” wide guard $459.99
GP1040-06 Pre-Cut for B&G Zeus3 9 and 1 inst.** for 9.5” wide guard $459.99
GP1040-34 Pre-Cut for B&G Zeus3 9 and space for 9.5” wide guard $459.99
GP1170-16 Pre-Cut for B&G Zeus3 12 and 2 inst.* for 9.5” wide guard $529.99
GP1170-17 Pre-Cut for B&G Zeus3 12 and 2 inst.** for 9.5” wide guard $529.99
GP1500-30 Pre-Cut for B&G Zeus3 7 and 1 inst.* for 9.5” wide guard $329.99
GP1500-31 Pre-Cut for B&G Zeus3 7 and 1 inst.** for 9.5” wide guard $329.99
GP1500-32 Pre-Cut for B&G Zeus3 7 and space for 9.5” wide guard $329.99
GP1600-14 Pre-Cut for B&G Zeus3 7 and 2 inst.* for 9.5” wide guard $429.99
GP1600-15 Pre-Cut for B&G Zeus3 7 and 2 inst.** for 9.5” wide guard $429.99
GP2040-05 Pre-Cut for B&G Zeus3 9 and 1 inst.* for 12” wide guard $459.99
GP2040-06 Pre-Cut for B&G Zeus3 9 and 1 inst.** for 12” wide guard $459.99
GP2040-34 Pre-Cut for B&G Zeus3 9 and space for 12” wide guard $459.99
GP2100-16 Pre-Cut for B&G Zeus3 12 and 2 inst.* for 12” wide guard $529.99
GP2170-17 Pre-Cut for B&G Zeus3 12 and 2 inst.** for 12” wide guard $529.99
Part number MSRP US$
continued
* Instruments that require a 3.6” round hole cut out. The majority of most 110mm (4.3” x 4.3”) instruments.** Square cut-out provided for B&G Triton2/ AP44 Instruments
GP1059 Pre-Cut for B&G Zeus Z8 for 9.5" wide guard $429.99
GP1063 Pre-Cut for B&G Zeus Touch 12 for 9.5" wide guard $499.99
GP1202 Pre-Cut for B&G Zeus² 12 for 9.5" wide guard $499.99
GP1800-13 Pre-Cut for B&G Vulcan9, for 9.5" wide guard $429.99
GP1807 Pre-Cut for B&G Zeus Touch 7 for 9.5" wide guard $429.99
GP1808 Pre-Cut for B&G Zeus Touch 8 for 9.5" wide guard $429.99
GP1813 Pre-Cut for B&G Zeus² 9 for 9.5" wide guard $429.99
GP1900-13 Pre-Cut for B&G Zeus² 9 for 9.5" wide guard $439.99
GP2050-10 Pre-Cut for B&G Zeus Z8 for 12" wide guard $429.99
GP2050-13 Pre-Cut for B&G Zeus² 9 for 12" wide guard $429.99
GP2050-21 Pre-Cut for B&G Vulcan9, for 12" wide guard $429.99
GP2058 Pre-Cut for B&G Zeus Touch 8 for 12" wide guard $429.99
GP2063 Pre-Cut for B&G Zeus Touch 12 for 12" wide guard $499.99
GP2202 Pre-Cut for B&G Zeus² 12 for 12" wide guard $499.99
GP1200-14 Pre-Cut for B&G Zeus3 12 for 9.5" wide guard $499.99
GP1900-06 Pre-Cut for B&G Zeus3 9 for 9.5" wide guard $439.99
GP2050-06 Pre-Cut for B&G Zeus² 9 for 12" wide guard $429.99
GP2200-14 Pre-Cut for B&G Zeus3 12 for 12" wide guard $499.99
SailPods Pre-Cut for B&G
Page 19
RMX4102 Pre-Cut for one B&G Triton²/AP44 square hole instrument $399.99
RMX4406 Pre-Cut for B&G Zeus² 7 $459.99
RMX4407 Pre-Cut for B&G Zeus Touch 7 $459.99
RMX4408 Pre-Cut for B&G Vulcan7 $459.99
RMX4600-04 Pre-Cut for B&G Zeus² 9 $499.99
RMX4800-13 Pre-Cut for B&G Vulcan9 $569.99
RMX4808 Pre-Cut for B&G Zeus Touch 8 $569.99
RMX4900-13 Pre-Cut for B&G Zeus² 9 $569.99
RMX4500-09 Pre-Cut for B&G Zeus3 7 $469.99
RMX4600-06 Pre-Cut for B&G Zeus3 9 $499.99
RailMounts Pre-Cut for B&G
SystemPods Pre-Cut for B&GGP2500-30 Pre-Cut for B&G Zeus3 7 and 1 inst.* for 12” wide guard $329.99
GP2500-31 Pre-Cut for B&G Zeus3 7 and 1 inst.** for 12" wide guard $329.99
GP2500-32 Pre-Cut for B&G Zeus3 7 and space for 12" wide guard $329.99
GP2600-14 Pre-Cut for B&G Zeus3 7 and 2 inst.* for 12" wide guard $429.99
GP2600-15 Pre-Cut for B&G Zeus3 7 and 2 inst.** for 12" wide guard $429.99
Part number MSRP US$
continued
* Instruments that require a 3.6” round hole cut out. The majority of most 110mm (4.3” x 4.3”) instruments.** Square cut-out provided for B&G Triton2/ AP44 Instruments
SpeakerPodSP200NS SpeakerPod Housing fits Bose Environmental SE151 (speakers not included)(Pair) $199.99
SpeakerPods
InstrumentPods
InstrumentPods Pre-Cut/Un-CutGP1300 Un-Cut (usable face = 15.3”w x 5”h) (46cm W x 11.4cm H) for 9.5" wide guard $299.99
GP1301 Pre-Cut for three instruments* for 9.5” wide guard $329.99
GP1302 Pre-Cut for three instruments** for 9.5” wide guard $329.99
GP1400 Un-Cut (usable face = 20.375”w x 5”h) (58.7cm W x 11.4cm H) for 9.5" wide guard $329.99
GP1401 Pre-Cut for four instruments* for 9.5” wide guard $349.99
GP1402 Pre-Cut for three instruments** for 9.5” wide guard $329.99
GP2300 Un-Cut (usable face = 15.3"w x 5"h) (46cm W x 11.4cm H) for 12” wide guard $299.99
GP2301 Pre-Cut for three instruments for 12” wide guard $329.99
GP2302 Pre-Cut for three instruments** for 12” wide guard $329.99
GP2400 Un-Cut (usable face = 20.375"w x 5"h) (58.7cm W x 11.4cm H) for 12" wide guard $329.99
GP2401 Pre-Cut for four instruments for 12” wide guard $349.99
GP2402 Pre-Cut for four instruments** for 12” wide guard $329.99
Part number MSRP US$
* Instruments that require a 3.6” round hole cut out. The majority of most 110mm (4.3” x 4.3”) instruments.** Square cut-out provided for Simrad IS42 / B&G Triton²/AP44 Instruments
Page 20
Stanchion KitsSK100 One 1" dia tube for use with GP1300/GP1400/GP1500/GP1600 Series $99.99
SK11 Two 11" long straight tubes, 1.25" diameter, for mounting GP1300, GP1400, GP1500, GP1600
$199.99
SK125 Two 1.25" S.S. tubes for overhead mounting of GP1300, GP1400, GP1500 or GP1600 Series $249.99SK129 Two 1.25" S.S. tubes for overhead mounting of GP1800, GP1040, GP1050 or GP1200 Series $249.99SK130 Two 1.25" S.S. tubes for overhead mounting of GP1030, GP1060, GP1080, GP1900 or
GP1170 Series$249.99
SK135 Two 1.25" S.S. tubes for dash mounting of GP1800/GP1900/GP1040/GP1050/GP1200/GP1030/GP1060/GP1080/GP1170 Series
$249.99
Stanchion Kitsfor Overhead Mountingfor On-Dash Mounting
Tamperproof Wrench
Tamperproof WrenchTPK300 TamperProof Wrench Set $19.99
fits all NavPod Generations
Page 21
Part number MSRP US$
AngleGuards9.5” widemeasured center to center
Shown: GP1400 InstrumentPod and
GP1200 SailPod mounted on AG127
9.5” wide Double Bend AngleGuard.
TP125 Top Plate.
Shown: GP1500 SystemPod mounted on AG118 9.5” wide Single
Bend AngleGuard. TP125 Top Plate.
AngleGuards 9.5” wideAG118 9.5" Wide 1.25" Single Bend for all SailPods and SystemPods $299.99
AG126 9.5" Wide 1.25" Double Bend for one InstrumentPod and a GP1020/GP1030/GP1060 or GP1090 SailPod below
$329.99
AG127 9.5" Wide 1.25" Double Bend for one InstrumentPod and a GP1050/GP1800/GP1200/GP1900 SailPod below
$329.99
AG18 9.5" Wide 1" Single Bend for all SailPods and SystemPods $249.99
AG27 9.5" Wide 1" Double Bend for one InstrumentPod and a GP1050/GP1800/GP1200/GP1900 Series SailPod below
$279.99
StraightGuards 9.5” wideSG10 9.5" Wide 1" Straight for InstrumentPods $179.99
SG125 9.5" Wide 1.25" Straight for InstrumentPods $249.99
Top Plates for 9.5” wideTP125 Top Plate is for 9.5" wide 1.25" diameter AngleGuards used on Edson steering systems $169.99
Page 22
Part number MSRP US$
AngleGuards12” wide
Shown: GP2400 InstrumentPod and
GP2200 SailPod mounted on AG227
12” wide Double Bend AngleGuard.
TP225 Top Plate.
Shown: GP2500 SystemPod mounted on AG218 12” wide Single
Bend AngleGuard. TP225 Top Plate.
measured center to center
AngleGuards 12” wideAG218 12" Wide 1.25" Single Bend for all SailPods and SystemPods $299.99
AG226 12" Wide 1.25" Double Bend for one InstrumentPod and a GP2020/GP2030/GP2060/or GP2090 SailPod below
$329.99
AG227 12" Wide 1.25" Double Bend one InstrumentPod and a for GP2050 or GP2200 SailPod below $329.99
StraightGuards 12” wideSG225 12" Wide 1.25" Straight for InstrumentPods $199.99
Top Plates for 12” wideTP225 Top Plate is for 12" wide 1.25" diameter AngleGuards used on Lewmar or Whitlock Steering
Systems$199.99
TP325 Top Plate is for converting the Merriman or Yacht Specialties Steering Systems to 12" wide 1.25" Diameter AngleGuard
$199.99
Page 23
Part number MSRP US$
PowerPods Un-CutPP4100 Un-Cut (usable face = 4.5"w x 4.5"h) (11.4cm w x 11.4cm h) $379.99
PP4400 Un-Cut (usable face = 8.75"w x 6"h) (22.2cm w x 15.2cm h) $269.99
PP4400-C Un-Cut (usable face = 8.75"w x 6"h) (22.2cm w x 15.2cm h)(Carbon Black) $279.99
PP4500 Un-Cut (usable face = 10.75"w x 6.5"h) (27.3cm w x 16.5cm h) $279.99
PP4500-C Un-Cut (usable face = 10.75"w x 6.5"h) (27.3cm w x 16.5cm h)(Carbon Black) $299.99
PP4600-00 Un-Cut (usable face = 11.375"w x 6.75"h) (28.9cm w x 17.1cm h) $299.99
PP4600-00-C Un-Cut (usable face = 11.375"w x 6.75"h) (28.9cm w x 17.1cm h)(Carbon Black) $379.99
PP4800 Un-Cut (usable face = 11.125"w x 8"h) (28.3cm w x 20.3cm h) $399.99
PP4800-C Un-Cut (usable face = 11.125"w x 8"h) (28.3cm w x 20.3cm h)(Carbon Black) $399.99
PP4900 Un-Cut (usable face = 12.5"w x 7.8"h) (31.75cm w x 19.8cm h) $399.99
PP4900-C Un-Cut (usable face = 12.5"w x 7.8"h) (31.75cm w x 19.8cm h) (Carbon Black) $409.99
PP5030 Un-Cut (usable face = 15.25"w x 10.5"h) (38..7cm w x 26.7cm h) $409.99
PP5050 Un-Cut (usable face = 12.75"w x 8.55"h) (32.4cm w x 21.7cm h) $499.99
PP5050-C Un-Cut (usable face = 12.75"w x 8.55"h) (32.4cm w x 21.7cm h) (Carbon Black) $429.99
PP5060 Un-Cut (usable face = 13.875"w x 10.375"h) (35.2cm w x 26.4cm h) $429.99
PP5100 Un-Cut (usable face = 14"w x x7.625"h) (35.5 cm w x 19.4 cm h) (White) $499.99
PP5100-C Un-Cut (usable face = 14"w x x7.625"h) (35.5 cm w x 19.4 cm h)) (Carbon Black) $379.99
PP5200 Un-Cut (usable face = 15.18"w x 9.85"h) (38.6cm w x 24.9cm h) $399.99
PP5200-C Un-Cut (usable face = 15.18"w x 9.85"h) (38.6cm w x 24.9cm h) (Carbon Black) $499.99
NavPod Un-Cuts
Usable FaceIf you plan to select an un-cut NavPod we provide “usable face” as a guideline. “Usable Face” is the available flat surface on the front of a NavPod. The overall height and width of the electronics needs to be less than the height and width of the usable face.
Page 24
Part number MSRP US$
NavPod Un-Cutscontinued
SystemPods Un-CutGP1040 Un-Cut (usable face = 17.5"w x 7.375"h) (44.5cm w x 18.7cm h) for 9.5" wide guard $429.99
GP1080 Un-Cut (usable face = 17.125"w x 9.125"h) (43.5cm w x 23.2cm h) for 9.5" wide guard $499.99
GP1170 Un-Cut (usable face = 20.77"w x 9.64"h) (52.7cm w x 24.5cm h) for 9.5" wide guard $499.99
GP1500 Un-Cut (usable face = 15.0"w x 6.0"h) (38.1cm w x 15.2cm h) for 9.5" wide guard $299.99
GP1600 Un-Cut (usable face = 19.75"w x 6.0"h) (50.2cm w x 15.2cm h) for 9.5" wide guard $399.99
GP2040 Un-Cut (usable face = 17.5"w x 7.375"h) (44.5cm w x 18.7cm h) for 12" wide guard $429.99
GP2080 Un-Cut (usable face = 17.125"w x 9.125"h) (43.5cm w x 23.2cm h) for 12" wide guard $499.99
GP2170 Un-Cut (usable face = 20.77"w x 9.64"h) (52.7cm w x 24.5cm h) for 12" wide guard $499.99
GP2500 Un-Cut (usable face = 15.0"w x 6.0"h) (38.1cm w x 15.2cm h) for 12" wide guard $299.99
GP2600 Un-Cut (usable face = 19.75"w x 6.0"h) (50.2cm w x 15.2cm h) for 12" wide guard $399.99
PedestalPods Un-CutPED4400-C Un-Cut (usable face = 8.75"w x 6"h) (22.2cm w x 15.2cm h)(Carbon Black) $279.99
PED4500-C Un-Cut (usable face = 10.75"w x 6.5"h) (27.3cm w x 16.5cm h)(Carbon Black) $299.99
PED4600-C Un-Cut (usable face = 11.375"w x 6.75"h) (28.9cm w x 17.1cm h) (Carbon Black) $379.99
PED4800-C Un-Cut (usable face = 11.125"w x 8"h) (28.3cm w x 20.3cm h)(Carbon Black) $399.99
PED4900-C Un-Cut (usable face = 12.5"w x 7.8"h) (31.75cm w x 19.8cm h) (Carbon Black) $409.99
PED5050-C Un-Cut (usable face = 12.75"w x 8.55"h) (32.4cm w x 21.7cm h) (Carbon Black) $429.99
PED5200-C Un-Cut (usable face = 15.18"w x 9.85"h) (38.6cm w x 24.9cm h) (Carbon Black) $499.99
PED5100-C Un-Cut (usable face = 14"w x x7.625"h) (35.5 cm w x 19.4 cm h) (Carbon Black) $379.99
SailPods Un-CutGP1030 Un-Cut (usable face = 15.25"w x 10.5"h) (38.7cm w x 26.7cm h) for 9.5" wide guard $429.99
GP1050 Un-Cut (usable face = 12.75"w x 8.75"h) (32.4cm w x 22.2cm h) for 9.5" wide guard $499.99
GP1060 Un-Cut (usable face = 13.75"w x 10.75"h) (34.9cm w x 27.3cm h) for 9.5" wide guard $499.99
GP1200 Un-Cut (usable face = 15.18"w x 9.85"h) (38.6cm w x 25cm h) for 9.5" wide guard $299.99
GP1800 Un-Cut (usable face = 11.125"w x 8"h) (28.3cm w x 20.3cm h) for 9.5" wide guard $399.99
GP1900 Un-Cut (usable face = 12.5"w x 7.8"h) (31.8cm w x 19.8cm h) for 9.5" wide guard $429.99
GP2030 Un-Cut (usable face = 15.25"w x 9.5"h) (38.7cm w x 26.7cm h) for 12" wide guard $499.99
GP2050 Un-Cut (usable face = 12.75"w x 8.75"h) (32.4cm w x 22.2cm h) for 12" wide guard $499.99
GP2060 Un-Cut (usable face = 13.75"w x 10.75"h) (34.9cm w x 27.3cm h) for 12" wide guard $299.99
GP2200 Un-Cut (usable face = 15.18"w x 9.85"h) (38.6cm w x 25cm h) for 12" wide guard $399.99
Page 25
Part number MSRP US$
RailMount Un-CutRMX4100 Un-Cut (usable face = 4.5"w x 4.5"h) (11.4cm w x 11.4cm h) $379.99
RMX4400 Un-Cut (usable face = 8.75"w x 6"h) (22.2cm w x 15.2cm h) $429.99
RMX4500 Un-Cut (usable face = 10.75"w x 6.5"h) (27.3cm w x 16.5cm h) $449.99
RMX4600-00 Un-Cut (usable face = 11.375"w x 6.75"h) (28.9cm w x 17.1cm h) $479.00
RMX4800 Un-Cut (usable face = 11.125"w x 8"h) (28.3cm w x 20.3cm h) $549.99
RMX4900 Un-Cut (usable face = 12.5"w x 7.8"h) (38.6cm w x 24.9cm h) $549.99
NavPod Un-Cutscontinued
MastPod Un-CutMP420 Un-Cut (usable face = 7.5"w x 17.5"h) (incl. two brackets & hardware) $499.99
SuperSailPod Un-CutNPT2000 Un-Cut fits space for 4 inst. (3.6” hole) and up to 9” MFD for 12” wide guard $399.99
Page 26
Part number MSRP US$
This Product Selection Guide and Price Book is designed to compliment the
NavPod Brochure.
Revised Janurary 9th, 2017