2017 02 03a main Internet catalogue - Direct Hit Sewer Nozzles
Transcript of 2017 02 03a main Internet catalogue - Direct Hit Sewer Nozzles
PCT/AU2012/000326
PCT/AU2012/000326
Extreme
root
penetrator
24º
PCT/AU2012/000326
PCT/AU2012/000326
Copyright Jim Paris 2011-2017
2017
DIRECT HIT®
PCT/AU2012/000326
#
1www.DirectHitSewerNozzles.com
All parts used are made from stainless steel. We use the highest quality reverse turbo nozzles that we can find around the world. These nozzles produce high quality laminar water (ceramic and steel jets produceturbulent water) and with our testing we found that they cut roots fast. They vibrate for better impact, theywork with water temperatures up to 180º F or 82º C, last five times longer than any other rotating nozzle,they have tungsten carbide seats and stainless steel bodies.
These turbo nozzles cut roots fast.
Our assemblies are designed to travel parallel to the bottom of the line (it is easier to penetrate roots on the bottom of the line), at a specific angle from 0º to whatever degree you specify to travel down or up a 50, 100, 150 or 225 mm line.
The less length the laminar jet cone of water has, the better it cuts.
Direct Hit® carriages are designed to direct the water jet cone to the best possible angle of attackwithout the operator twisting and turning. The carriages are assembled with different nozzles and various accessories to create different points of attack.
The accessories are designed to interchange with all our assemblies.
We have used and tested our assemblies at 5000psi for over three years without any breakdowns ormaintenance required.
By understanding your nozzle assemblies and how they work, it will cut down your operating time on the job by half. It enables you to become more efficient, knowledgeable, relaxed, energetic and be more profitable.
Profitable you say? If you halve your operating time, how much money will you save?
If you halve your expenses on fuel, repairs on equipment (jetter, hoses and camera), injuries on you and your staff (less medical bills and days off), how much money will you save?
If you do not need to upgrade your jetter, but upgrade only to a new nozzle assembly, how much money will you save?
If you add all the above savings, how much money will you save and how will it change your life style?
Do you want to change your lifestyle so as to have more money in your pocket or work less hours andhave more time to be with family and friends?
Now what if you add one or two extra jobs to the day, that previously you may have lost because jobstook more time to finish, how much more money can you add to your savings?
The choice is yours.
Do the math, purchase one of our products and you will end up with a smile on your face.
Direct Hit® is about knowledge we have acquired, from unblocking over 35,000 blocked drains,
expressed through design and quality of product.
We make carriages that fit accessories, so you can create your own assemblyto make unblocking of drains faster, easier and more profitable.
Cat: 2/03/2017Copyright Jim Paris 2011-2017#
2
How to choose a Direct Hit assembly
Benefits and how the assemblies work
Content pages
Jetters over 34 litres per minute
Jetters under 34 litres per minute
Jetters under 21 litres per minute
Specifications
Build your own custom assembly
Photos
Working in 100 and 150 mm pipes
Working in 100 mm pipes
Working in 100 mm pipes
Working in 150 mm pipes
Working in 150 mm pipes
6-7
08-15
18-19
22-27
29-39
42-47
68-71
61-67
72-73
49-59
3-5
17
21
41
Copyright Jim Paris 2011-2017 www.DirectHitSewerNozzles.com#
3
Contents
Understanding the three categories of assemblies
How to choose a Direct Hit Assembly
How do the C38rs and DC38 work in pipes and how to cut roots
How do the C43rs and DC43 work in pipes and how to cut roots
Actual size of a 38 ring
Actual size of a 43 ring
How 38 mm rings work in the pipe
How rings work in the pipe
100 and 150mm lines What assemblies to use in when your jetter is rated under 21 litres per minute
Actual size of DC38 cap-to-back (capped front and back reverse turbo nozzle)
What can a DC38 cap-to-back go through or not in 100 - 150 mm pipes under 21 l/min
What assemblies to use in 100 mm lines when your jetter is rated under 34 litres per minute
Actual size of C38RS 24º A C43rs 30º with front turbo nozzle & back 3 ceramic jets
and back 3 ceramic jets
What can a C38rs and C43rs go through or not, in 100 mm pipes under 34 l/min
Actual size of DC38 back-to-back (front and back reverse turbo nozzles)
What can a DC38 back-to-back go through or not, in 100 mm pipes under 34 l/min
Actual size of DC38 cap-to-back (front and back reverse turbo nozzles)
What can a DC38 cap-to-back go through or not, in 100 mm pipes under 34 l/min
6
7
8-9
10-11
12
13
14
15
17
18
19
21
22
23
24
25
26
27
www.DirectHitSewerNozzles.comCopyright Jim Paris 2011-2017#
4
Contents What assemblies to use in 150mm lines when your jetter is rated under 34 litres per minute
Actual size of C38RS 24º & C43rs 30º with front turbo nozzle & back 3 ceramic jets
What can a C38rs & C43rs go through or not, in 150 mm pipes under 34 l/min
Actual size of C38R assembly with front 24º turbo nozzle & back 3 ceramic jets
What can a C38r go through or not, in 150 mm pipes under 34 l/min
Actual size of C43r 30° assemblies with front reverse turbo nozzle and
back 3 ceramic jets
What can the C43r assemblies go through or not, in 150 mm pipes under 34 l/min
Actual size of DC43 back-to-back (front and back reverse turbo nozzles)
What can a DC43 back-to-back go through or not, in 150 mm pipes under 34 l/min
Actual size of DC43 cap-to-back (capped front and back reverse turbo nozzle)
What can a DC43 cap-to-back go through or not, in 50 mm pipes under 34 l/min
What assemblies to use in 100mm lines when your jetter is rated over 34 litres per minute
Actual size of C38RS 24º & C43rs 30º with front turbo nozzle & back 3 ceramic jets
and back 3, 4 and 6 ceramic jets
What can a C38RS and C43rs go through or not, in 100 mm pipes over 34 l/min
Actual size of DC38T back-to-back (front and back reverse turbo nozzles)
What can a DC38T back-to-back go through or not, in 100 mm pipes over 34 l/min
Actual size of DC38T cap-to-back (capped front and back reverse turbo nozzle)
What can a DC38T cap-to-back go through or not, in 100 mm pipes over 34 l/min
29
30
31
32
33
34
35
36
37
38
39
41
42
43
44
45
46
47
www.DirectHitSewerNozzles.comCopyright Jim Paris 2011-2017#
5
Contents What assemblies to use in 150mm lines when your jetter is rated under 34 litres per minute
Actual size of C38RS 24º & C43RS 30° with front turbo nozzle & back 3 ceramic jets
What can a C38rs & C43RS go through or not, in 150 mm pipes over 34 l/min
Actual size of C38r assembly with front 24º turbo nozzle & back 3 ceramic jets
What can a C38r go through or not, in 150 mm pipes over 34 l/min
Actual size of C43r 30° assemblies with front reverse turbo nozzle and
back 3 ceramic jets
What can the C43r assemblies go through or not, in 150 mm pipes under 34 l/min
Actual size of DC43T back-to-back (front and back reverse turbo nozzles)
What can a DC43T back-to-back go through or not, in 150 mm pipes over 34 l/min
Actual size of DC43T cap-to-back (capped front and back reverse turbo nozzle)
What can a DC43T cap-to-back go through or not, in 150 mm pipes over 34 l/min
Specifications for C38RS, C43RS, C38R & C43R assemblies
Specifications for Dc38, DC43 and C38rsT assemblies
Starter Kit prices for C38RS, C43RS, C38R, C43R 30º and C43R 24º
What’s included in the C38RS, C43RS, C38R, C43R 30º & C43R 24º starter kit
Starter cap kit prices for DC38, DC43 and C38rsT
What’s included in the DC38, DC43, starter kit
Build your own Direct Hit assembly kit (prices of carriages and accessories)
Photos of C38r, C38rs, C34r, C43rs, DC38, DC43, DC43t , rings
49
50
51
52
53
54
55
56
57
58
59
61
62
64
65
66
67
68
69
www.DirectHitSewerNozzles.comCopyright Jim Paris 2011-2017#
6
Why our assemblies work better & last longer
To unblock swer or rain water drains with a water jetter, in your tool box you need a penetrator and acutter.
Direct Hit has designed Carriages that you can install various accessories to create assemblies for deferent points of attack.
To be able to maximise you're the cutting power, of the high pressure water your pump is producing, we convert it to Laminar water. This water has minimum turbulence making the water stronger, allowing you for instance to cut tree roots with ease.
All assemblies have been designed to travel at the bottom of the line, parallel to it, where the tree root blockage is the easiest to cut through. You can also unblock a wipe blockagewith ease.
The assemblies are designed to be able to adjust the angel of the front or front and back turbo nozzles so you can increase the cutting power of the Laminar water. This is done by adding a 100 mm or 150 mm Ring to the assembly, adjusting it the front or back in 100 mm and 150 mm pipes. The accessories inter connect with other carriages.
The turbo nozzles that we use are made from stainless steel and have tungsten carbideseats and rotors. They can last 5 times longer than a ceramic seated turbo nozzle. You will only need to service them every two to three years approximately.
Understanding the two categories of assemblies
1. Penetrators with front angle adjustment
The R Range Penetrators: these assemblies look like a Rocket. They were designed to penetrate, cut and flush out the debris with the front turbo nozzle (if travelling down streama 150 mm line and dropping into a 150 mm shaft). The rear jets are used to thrust you there and to flush out the debris in any line if you are travelling up stream.
The RS Range Penetrators: these assemblies look like a Rocket but are Shorter. They were designed to penetrate, cut and flush out the debris with the front turbo nozzle (if travelling down stream a 100 mm line and dropping into a 100 mm shaft). The rear jets are used to thrust you there and to flush out the debris in any line if you are travelling up stream.
2. Penetrators and Cutters with front and back angle adjustment
The DC Range Penetrators and Cutters: these Carriages have a Dual hose water supply. This enables them to be adjusted in the front and back. These assemblies are designed to penetrate and cut with front and back turbo nozzles. The front turbo nozzle will cut and flush out the debris (if travelling down stream a 100 mm line and dropping into a 100 mm shaft). The rear turbo nozzle are used to thrust you there, cut and flush out the debris any line if you are travelling up stream. They inter connect with other assemblies.
www.DirectHitSewerNozzles.comCopyright Jim Paris 2011-2017#
7
How to Choose your Assembly:
1. What group does your jetter come under?
2. What assembly will work with your jetter?
To choose and order the appropriate assembly you will need the following information.
1. Your pump’s pressure in Psi or Bar
2. Your pump’s output in Litres or Gallons per minute
3. Your hose thread connection size (02, 04, 06 etc) that you connect to your nozzle
4. Do you want cutting power or to go further (thrust)?
Once you have your PUMP specifications, for example, 5000psi @ 21 liters
per minute, you can choose from a large range of assembly that will suit
your specific application.
Note: If you do not find what you need, do not hesitate to contact us at Direct Hit and we
can build you a custom carriage or accessories for your specific requirements.
There are three jetter groups:
1. UNDER 21 LITRES PER MINUTE OR UNDER 5.5 G/M
a. What assemblies work in 100 and 150 mm lines go to page 18-19
2. OR UNDER 34 LITRES PER MINUTE UNDER 10 G/M
a. What assemblies work in 100 mm lines go to page 22-27
b. What assemblies work in 150 mm lines go to page 29-39
3. OR OVER 34 LITRES PER MINUTE OVER 10 G/M
a. What assemblies work in 100 mm lines go to page 42-47
b. What assemblies work in 150 mm lines go to page 49-59
Note: Before you go to the page, check out page 11 to 16. The diagrams will
give you an understanding on how the assemblies work.
www.DirectHitSewerNozzles.comCopyright Jim Paris 2011-2017#
# 8www.DirectHitSewerNozzles.comCopyright Jim Paris 2011-2017
Pull back and forward 90 mm the C38rs from the hit position & cut through
24º
PC
T/A
U2
01
2/0
00
32
6P
CT
/AU
20
12
/00
03
26
4" (100mm) line
4" (100mm) line
6" (150mm) line
15" (380mm)
C38rs traveling this way hits the blockage
tree root blockage
tree root blockage
The C38rs hits the blockage with its 24º front turbo nozzle.
24º
PC
T/A
U2
01
2/0
00
32
6P
CT
/AU
20
12
/00
03
26
1
2
4" (100mm) or 6" (150 mm) line
C38rs is through the blockage
tree root
The C38rs cuts through the blockage.
24º
PC
T/A
U2
01
2/0
00
32
6P
CT
/AU
20
12
/00
03
26
3
turn the water on and move forward and back 90 mm
cut forward with a front turbo nozzle using 10 - 40 % power
cut forward with a front turbo nozzle using 10 - 40 % power
3"(90mm)
Forward or back cutting with a C38rs and DC38
# 9
Forward or back cutting with a C38rs and DC38
www.DirectHitSewerNozzles.comCopyright Jim Paris 2011-2017
cut
turn the water on and move forward and back 90 mm
turn the water on and move forward and back 90 mm
24º
PC
T/A
U2
01
2/0
00
32
6P
CT
/AU
20
12
/00
03
26
tree root
4
cap
cap
D.H
D.H
tree root
tree root
You CCTV the line and find big roots still not cut. Use the DC38 to cut the
Using a DC38rs
remaining roots. Move your DC38 forward from the hit position 380 mm.
5
6
Move your C38rs 380 mm from the hit position, move forward and back90 mm to cut the remaining roots.
The DC38 cuts through the blockage.
move forward slowly cutting tree roots
cut with the back turbo nozzle using 100 % power
cut with the back turbo nozzle using 100 % power
cut forward with a front turbo nozzle using 10 - 40 % power
15" (380mm)
15" (380mm)
4" (100mm) line
4" (100mm) line
4" (100mm) line
3"(90mm)
3"(90mm)
3"(90mm)
3"(90mm)
3"(90mm)
3"(90mm)
# 10
Penetrate and cut forward with a C43rs
www.DirectHitSewerNozzles.comCopyright Jim Paris 2011-2017
tree root blockage
tree roots
tree roots
1
2
The C43rs cuts through the blockage.
3
9" (230mm)
16" (420mm)
30º
PC
T/A
U2
01
2/0
00
32
6
30º
PC
T/A
U2
01
2/0
00
32
6
30º
PC
T/A
U2
01
2/0
00
32
6
Pull the C43rs back and forward 90 mm from the position until it cuts through the blockage
C43rs hits the blockage with its 30°turbo nozzle.
C43rs traveling this way hits the blockage
C43rs is through the blockage
turn the water on and move forward and back 90 mm
cut forward with a front turbo nozzle using 10 - 40 % power
cut forward with a front turbo nozzle using 10 - 40 % power
6" (150mm) line
4" (100mm) line
4" (100mm) line
4" (100mm) line
3"(90mm)
# 11
Forward or back cutting with a C43rs and DC43
www.DirectHitSewerNozzles.comCopyright Jim Paris 2011-2017
4
cap
cap D
.H
cap
cap D
.H
5
6
30º
PC
T/A
U2
01
2/0
00
32
6
tree roots
tree roots
The DC43 cuts through the blockage.
Move your C43rs 230 mm from the hit position, move forward and back90 mm to cut the remaining roots.
turn the water on and move forward and back 90 mm
You CCTV the line and find big roots still not cut. Use the DC43 to cut theremaining roots. Move your DC43 forward from the hit position 230 mm.
turn the water on and move forward and back 90 mm
move forward to the next tree root cutting
cut forward with a front turbo nozzle using 10 - 40 % power
cut with the back turbo nozzle using 100 % power
cut with the back turbo nozzle using 100 % power
4" (100mm) line
4" (100mm) line
4" (100mm) line
9" (230mm)
9" (230mm)
9" (230mm)
3"(90mm)
3"(90mm)
3"(90mm)
3"(90mm)
3"(90mm)
3"(90mm)
12
Actual Size of 38 rings
C38 ring to adjust carriage to 150mm pipe
C38 ring to adjust carriage to 100mm pipe
100mm 150mm
C38r with ring in 150mm pipe front: 24 degree reverse turbo nozzle back: 3 or 6 ceramic jets at 30º
C38 or C38r assembly without ring will hit top of a 150 mm pipe at 630mm and with a ring will hit the top of the pipe at 355 mm
over 30mm
Benefits:1. Finishing tool for cutting difficult roots, cleaning fat or mineral deposits on the wall of the pipe
2. It can cut roots around a bend or drop into the bottom bend of a shaft and cut through
3. Can unblock a partially collapsed: a. pipes or pipe at the shaft b. main bend on main junction
Note: Due to the angle of the turbo jet as shown on the drawing above, using the 150mm ring, the assembly will be 30 mm higher from the bottom and the top angel of the water jet
www.DirectHitSewerNozzles.comCopyright Jim Paris 2011-2017#
13
C43 ring to adjust carriage to 150mm pipe
C43 ring to adjust carriage to 100mm pipe
100mm 150mm
C43r with ring in 150mm pipe front: 30 degree reverse turbo nozzle back: 3 or 6 ceramic jets at 30º
Actual Size of 43 rings
over 35 mm
C43 or C43r assembly without ring will hit top of a 150 mm pipe at 420mm and with a ring will hit the top of the pipe at 290 mm
Benefits:1. Finishing tool for cutting difficult roots, cleaning fat or mineral deposits on the wall of the pipe
2. It can cut roots around a bend or drop into the bottom bend of a shaft and cut through
3. Can unblock a partially collapsed: a. pipes or pipe at the shaft b. main bend on main junction
Note: Due to the angle of the turbo jet as shown on the drawing above, using the 150mm ring, the assembly will be 35 mm higher from the bottom and the top angel of the water jet
www.DirectHitSewerNozzles.comCopyright Jim Paris 2011-2017#
# 14
Forward or back cutting with the DC38
Copyright Jim Paris 2011-2017 www.DirectHitSewerNozzles.com
ring
cap
ring
cap
D.H
D.H
14" (350mm)
How does a the DC38 work with a 100 mm ring
position your DC38, 240 mm past the tree root
How does a the DC38 work with a 150 mm ring
position your DC38, 350 mm past the tree root
Forward or back cutting with rings on the DC38
turn the water on and move forward and back 90 mm
cap D
.H
tree root
tree root
tree root
You CCTV the line and find big roots still not cut. Use the DC38 to cut theremaining roots. Move your DC38 forward from the hit position 380 mm.
cut with the back turbo nozzle using 100 % power
cut with the back turbo nozzle using 100 % power
cut with the back turbo nozzle using 100 % power
3"(90mm)
3"(90mm)
3"(90mm)
3"(90mm)
3"(90mm)
3"(90mm)
1
2
3
6" (150mm) line
4" (100mm) line
4" (100mm) line
6" (150mm) line
25" (630mm)
15" (380mm)
9" (230mm)
# 15
Forward or back cutting with the DC43
Copyright Jim Paris 2011-2017 www.DirectHitSewerNozzles.com
ring
cap
D.H
position your DC43, 190 mm past the tree root
How does a the DC43 work with a 100 mm ring
D.H
ring
cap
position your DC43, 240 mm past the tree root
How does a the DC43 work with a 150 mm ring
turn the water on and move forward and back 90 mm
You CCTV the line and find big roots still not cut. Use the DC38 to cut theremaining roots. Move your DC43 forward from the hit position 380 mm.
cap
cap D
.H
tree root
Forward or back cutting with rings on the DC43
tree root
tree root
cut with the back turbo nozzle using 100 % power
cut with the back turbo nozzle using 100 % power
cut with the back turbo nozzle using 100 % power
16" (420mm)
9" (230mm)4" (100mm) line
4" (100mm) line
6" (150mm) line
6" (150mm) line
190 mm(7")
190 mm(7")
240 mm(9")
3"(90mm)
3"(90mm)
3"(90mm)
3"(90mm)
3"(90mm)
3"(90mm)
4
5
6
16
This catalogue is designed to be viewed twopages at a time.
To view it in Adobe Reader: 1. right click on view top left corner
2. go down to page display
right click on two page view3.
4. right click on arrow
Copyright Jim Paris 2011-2017#
17
What assemblies to use in 100 and 150 mm lines when your jetter is rated
under 21 litres per minute
Due to the low volume of water, our DC38 assembly can be used as a finish tool to flush out the line
or to cut roots out of the line.
Step 1 Use your current nozzles to penetrate and create
a passage for our assemblies to go through.You can use the C38rs but you will have low thrust.
Step 2 Use the DC38 cap to back or
the DC43 cap to back with ring adjustment to flush out or to cut roots from lines.
www.DirectHitSewerNozzles.com
Under21 l/min
or 10 gpm
Copyright Jim Paris 2011-2017#
18
Actual Size of DC38 AssemblyCutter(Cutter with Back Angle Adjustment)
Under21 l/min
or 5.5 gpm
used in100 mm
and 150mm
lines
www.DirectHitSewerNozzles.com
DC38front cap and back 24º SS
reverse turbo nozzlewith
tungsten carbide seat
24º
24
º
cap
cap with back turbo nozzle
You can add a Ring cap with 100-150 mm ring.
24º
BACK TURBO NOZZLE
CAP
PCT/AU2012/000326
scaleddown
Copyright Jim Paris 2011-2017#
19
DIRECT HIT®
YESYES
YESYES
cut, clean & adjust from back turbo nozzle
DC38 cap-to-back (front ring cap with back reverse turbo nozzle)
NO
NONO NO
The DC38 cap-to-back works in any of the 100mm pipe combinations shown below.
DC38 cap-to-back in 100 mm lines (what can it go through, around, up or down)
www.DirectHitSewerNozzles.com
Cleandrain walls
Unblockgrease,soapetc.
Removesandfrom
lines &grates
Ice in
drains
Clean manholes, shafts,pits& hydro excavate
Adjustassembly
to suit100 &
150 lines
Cut tree roots
FAST
Penetrate tree roots
FAST
YES YESYES YESYES YES
YES YES YESYES YES YES
Put a
SMILEon your
face
YES
DC38cap-to-backin 100mm
lines
80 mmP.V.CBend
90 mmP.V.CBend
100 mm P.V.C 88º Junction
100 mm P.V.C 88º Junction
100 mm P.V.C 90º I.O
100 mmP.V.CBend
100 mmTerracotta
Boundary Trap
50 mmMin Access No 50 mm Bend
Under 21 l/min in 100 & 150 mm lines
Because we are continuously improving our products and services, Direct Hit reserves the right to change the specifications and prices without prior notice.
150 mm PVC& Terracotta
Boundary Trap
Copyright Jim Paris 2011-2017#
20
This catalogue is designed to be viewed twopages at a time.
To view it in Adobe Reader: 1. right click on view top left corner
2. go down to page display
right click on two page view3.
4. right click on arrow
Copyright Jim Paris 2011-2017#
21
What assemblies to usein 100 mm lines
when your jetter is rated at:
under 34 litres per minute
Step 1 Use the C38rs or C43rs to
penetrate, unblock, cut and flush out the debris up stream or down stream.
With the C38rs and C43rs, you only need a 50 mm entry point.
Note : If the jetter is 4300 Psi @ 31 l/min plus,you can use the DC38 back to back
turbo nozzle assembly first go.
Step 2 If you find with the CCTV that the tree roots
have not been all cut, use the DC38 cap to back turbo nozzle
on its own or with ring adjustment.
This assembly cuts dead roots.
Under34 l/min
or 10 gpm
www.DirectHitSewerNozzles.comCopyright Jim Paris 2011-2017#
# 22
front and back view
C38rs C43rsThe safest way entering an
unknown blockage
Actual Size of C38rs and C43rs AssembliesPenetrator The C38rs and C43rs assemblies are used to penetrate & cut forward with a turbo nozzle
soft or hard materials, they flushe out all debris from the line without changing nozzles up stream or down stream through a 50 mm access point. Penetrator with front angle adjustment.
™ ™
Under or Over34 l/min
or 10 gpm
30º
PCT/AU2012/000326
24º
PCT/AU2012/000326
24° 30°
www.DirectHitSewerNozzles.com
YES
100 mm P.V.C 88º Junction
YESYES
Unblockblockages
causedby
WIPES
Copyright Jim Paris 2011-2017
PCT/AU2012/000326PCT/AU2012/000326
EXTREME PENETRATORfront 24º SS
reverse turbo nozzlewith
tungsten carbide seatsand back 3, 4 or 6
ceramic jets
ALL ROUNDERPENETRATORfront 30º SS
reverse turbo nozzlewith
tungsten carbide seatsand back 3, 4 or 6
ceramic jets
30º24º
# 23
DIRECT HIT®
C38rs and C43rs in (what it can go through) 100 mm lines
The C38rs & C43rs works in any of the 100mm pipe combinations shown below.
C38rs and C43rs in 100mm lines (cut with front turbo nozzle)
Penetrate, cut, clean and adjust assembly front turbo nozzle only
NO
Under 34 l/min in 100mm lines
Penetrate& cut
tree rootsFAST
Unblockblockages
causedby
WIPES
Cleandrain walls
Unblockgrease,soapetc.
Removesandfrom
lines &grates
Ice in
drains
Clean manholes, shafts,pits& hydro excavate
Adjustassembly
to suit100 &
150 lines
YESYESYESYES YESYES YESYES
YESYESYES YESYES YESYES YES YES
www.DirectHitSewerNozzles.com
YESYES
Put a
SMILEon your
face
YES
C38rs &C43rs
in 100mmlines
80 mmP.V.CBend
90 mmP.V.CBend
100 mm P.V.C 88º Junction
100 mm P.V.C 88º Junction
100 mm P.V.C 90º I.O
100 mmP.V.CBend
100 mmTerracotta
Boundary Trap
50 mmMin Access No 50 mm Bend
Because we are continuously improving our products and services, Direct Hit reserves the right to change the specifications and prices without prior notice.
150 mm PVC& Terracotta
Boundary Trap
Copyright Jim Paris 2011-2017
24
24º
24º
24º2
4º
Under34 l/min
or 10 gpm
used in100 mm
linesDC38
with ring kit
back-to-back24º ss
reverse turbo nozzlewith
tungsten carbide seatunder 31 litres
™
Actual Size of DC38 and AssemblyPenetrator Cutter(Penetrator and Cutter with Front and Back Angle Adjustment)
www.DirectHitSewerNozzles.com
The Ring can be fitted on the front or back
scaleddown
BACK TURBO NOZZLE
24º
24º
BACK TURBO NOZZLE
PCT/AU2012/000326
Copyright Jim Paris 2011-2017#
25
DIRECT HIT®
NONO NO
DC38 back-to-back in (what it can go through) 100 mm lines
The DC38 back-to-back works in any of the 100mm pipe combinations shown below.
Under 34 l/min in 100mm lines
DC38 back-to-back (front and back reverse turbo nozzles)
www.DirectHitSewerNozzles.com
Cleandrain walls
Unblockgrease,soapetc.
Removesandfrom
lines &grates
Ice in
drains
Clean manholes, shafts,pits& hydro excavate
Adjustassembly
to suit100 &
150 lines
Cut tree roots
FAST
Penetrate tree roots
FAST
YESYESYES YESYES YESYES YES YES
YES YES YESYES YES YES
Put a
SMILEon your
face
DC38back-to-back
in 100mmlines
80 mmP.V.CBend
90 mmP.V.CBend
100 mm P.V.C 88º Junction
100 mm P.V.C 88º Junction
100 mm P.V.C 90º I.O
100 mmP.V.CBend
100 mmTerracotta
Boundary Trap
50 mmMin Access No 50 mm Bend
Because we are continuously improving our products and services, Direct Hit reserves the right to change the specifications and prices without prior notice.
Copyright Jim Paris 2011-2016
150 mm PVC& Terracotta
Boundary Trap
Copyright Jim Paris 2011-2017#
26
Actual Size of DC38 AssemblyCutter(Cutter with Back Angle Adjustment)
Under34 l/min
or 10 gpm
used in100 mm
linesDC38front cap & back
24º SS reverse turbo nozzle
with tungsten carbide seat
™
www.DirectHitSewerNozzles.com
scaleddown
24º
24
º
cap
cap with back turbo nozzle
You can add a Ring cap with 100-150 mm ring.
24º
BACK TURBO NOZZLE
CAP
PCT/AU2012/000326
Copyright Jim Paris 2011-2017#
27
DIRECT HIT®
DC38 cap-to-back (capped front and back reverse turbo nozzle)
NONO NO
The DC38 cap-to-back works in any of the 100mm pipe combinations shown below.
DC38 cap-to-back in (what it can go through) 100 mm lines
Under 34 l/min in 100mm lines
www.DirectHitSewerNozzles.com
cut, clean & adjust from back turbo nozzle
Cleandrain walls
Unblockgrease,soapetc.
Removesandfrom
lines &grates
Ice in
drains
Clean manholes, shafts,pits& hydro excavate
Adjustassembly
to suit100 &
150 lines
Cut tree roots
FAST
Penetrate tree roots
FAST
YESYES
YESYESNO YESYES YESYES YESYES YES
YES YES YESYES YES YES
Put a
SMILEon your
face
DC38cap-to-backin 100mm
lines
80 mmP.V.CBend
90 mmP.V.CBend
100 mm P.V.C 88º Junction
100 mm P.V.C 88º Junction
100 mm P.V.C 90º I.O
100 mmP.V.CBend
100 mmTerracotta
Boundary Trap
50 mmMin Access No 50 mm Bend
Because we are continuously improving our products and services, Direct Hit reserves the right to change the specifications and prices without prior notice.
150 mm PVC& Terracotta
Boundary Trap
Copyright Jim Paris 2011-2017#
28
This catalogue is designed to be viewed twopages at a time.
To view it in Adobe Reader: 1. right click on view top left corner
2. go down to page display
right click on two page view3.
4. right click on arrow
Copyright Jim Paris 2011-2017#
29
Under34 l/min
or 10 gpm
www.DirectHitSewerNozzles.com
What assemblies to usein 150 mm lines
when your jetter is rated at:
under 34 litres per minute
Step 1 Use the C38rs, C43rs, C38r or C43r to
penetrate, unblock, cut and flush out the debris up stream or down stream.
With the C38rs, C43rs, C43r or C43rs you only need a 50 mm entry point.
Note : If the jetter is 4300 Psi @ 31 l/min plus,you can use the DC43 back to back
turbo nozzle assembly first go.
Step 2 If you find with the CCTV that the tree roots
have not been all cut, use the DC43 cap to back turbo nozzle
on its own or with ring adjustment.
This assembly cuts dead roots.
Copyright Jim Paris 2011-2017#
30www.DirectHitSewerNozzles.comCopyright Jim Paris 2011-2017
front and back view
C38rs C43rsThe safest way entering an
unknown blockage
Actual Size of C38rs and C43rs AssembliesPenetrator The C38rs and C43rs assemblies are used to penetrate & cut forward with a turbo nozzle
soft or hard materials, they flushe out all debris from the line without changing nozzles up stream or down stream through a 50 mm access point. Penetrator with front angle adjustment.
™ ™
Under or Over34 l/min
or 10 gpm
30º
PCT/AU2012/000326
24º
PCT/AU2012/000326
24° 30°
YES
100 mm P.V.C 88º Junction
YESYES
Unblockblockages
causedby
WIPES
PCT/AU2012/000326PCT/AU2012/000326
EXTREME PENETRATORfront 24º SS
reverse turbo nozzlewith
tungsten carbide seatsand back 3, 4 or 6
ceramic jets
ALL ROUNDERPENETRATORfront 30º SS
reverse turbo nozzlewith
tungsten carbide seatsand back 3, 4 or 6
ceramic jets
30º24º
#
31
DIRECT HIT®
C38rs & C43rs in (what it can go through) 100 mm lines
The C43rs works in any of the 150mm pipe combinations shown below.
C43rs & C43rs in 100mm lines (cut with front turbo nozzle)
Penetrate, cut, clean and adjust assembly front turbo nozzle only
NO
Penetrate& cut
tree rootsFAST
Unblockblockages
causedby
WIPES
Cleandrain walls
Unblockgrease,soapetc.
Removesandfrom
lines &grates
Ice in
drains
Clean manholes, shafts,pits& hydro excavate
Adjustassembly
to suit100 &
150 lines
YESYESYESYESYES YESYES YESYES
YESYESYES YESYES YESYES YES YES
www.DirectHitSewerNozzles.com
Under 34 l/min in 150mm lines
YESYES
Put a
SMILEon your
face
C38rs&C43rs
in 150mmlines
80 mmP.V.CBend
90 mmP.V.CBend
100 mm P.V.C 88º Junction
100 mm P.V.C 88º Junction
100 mm P.V.C 90º I.O
100 mmP.V.CBend
100 mmTerracotta
Boundary Trap
150 mm PVC& Terracotta
Boundary Trap
50 mmMin Access No 50 mm Bend
Because we are continuously improving our products and services, Direct Hit reserves the right to change the specifications and prices without prior notice.
Copyright Jim Paris 2011-2017#
32
front view turbo nozzle
back view 3, 4 or 6
ceramic jets
Actual Size of a C38R AssemblyPenetrator
24º
Extremeroot
penetrator
PCT/AU2012/000326
The C38r and C38rs assemblies are used to penetrate & cut forward with a turbo nozzle soft or hard materials, it flushes out all debris from the line without changing nozzles up stream
or down stream through a 50 mm access point. Penetrator with front angle adjustment.
C38r
100 mm using03 or 04 Hose
NO
™
Under or Over34 l/min
or 10 gpm
used in150 mm
lines
www.DirectHitSewerNozzles.com
YESYES
Unblockblockages
causedby
WIPES
Copyright Jim Paris 2011-2017
EXTREME PENETRATORfront 24º SS
reverse turbo nozzlewith
tungsten carbide seatsand back 3, 4 or 6
ceramic jets
PCT/AU2012/000326
30º
#
# 33
DIRECT HIT®
C38rin 150mm
lines
C38r in 150mm lines (cut with front turbo nozzle)
C38r in 100 mm lines (what it can go through)
The C38r works in any of the 150mm pipe combinations shown below
NO
NO
NONO
www.DirectHitSewerNozzles.com
Penetrate, cut, clean and adjust assembly front turbo nozzle only
Penetrate& cut
tree rootsFAST
Unblockblockages
causedby
WIPES
Cleandrain walls
Unblockgrease,soapetc.
Removesandfrom
lines &grates
Ice in
drains
Clean manholes, shafts,pits& hydro excavate
Adjustassembly
to suit100 &
150 lines
YESYESYESYES
YESYESYESYESYES YESYES YESYES
YES YESYES YES YES YES
Under 34 l/min in 150mm lines
Put a
SMILEon your
face
80 mmP.V.CBend
90 mmP.V.CBend
100 mm P.V.C 88º Junction
100 mm P.V.C 88º Junction
100 mm P.V.C 90º I.O
100 mmP.V.CBend
100 mmTerracotta
Boundary Trap
50 mmMin Access No 50 mm Bend
Because we are continuously improving our products and services, Direct Hit reserves the right to change the specifications and prices without prior notice.
150 mm PVC& Terracotta
Boundary Trap
Copyright Jim Paris 2011-2017
34www.DirectHitSewerNozzles.comCopyright Jim Paris 2011-2017
Actual Size of C43r AssembliesPenetrator
C43r
The C43r assembly is used to penetrate & cut forward with a turbo nozzle soft or hard materials,thet flushe out all debris from the line without changing nozzles up stream or down stream
through a 50 mm access point. Penetrator with front angle adjustment.
™
3,4 or or 6 ceramic jets
30º front turbo nozzle
30º
PCT/AU2012/000326
cut betterin 150mm
lines
back view 3, 4 or 6
ceramic jets
100 mm using03 or 04 Hose
NO
Under or Over34 l/min
or 10 gpm
used in150 mm
lines
ALL ROUNDERPENETRATORfront 30º SS
reverse turbo nozzlewith
tungsten carbide seatsand back 3, 4 or 6
ceramic jets
PCT/AU2012/000326
30º
#
35www.DirectHitSewerNozzles.com
Because we are continuously improving our products and services, Direct Hit reserves the right to change the specifications and prices without prior notice.
Copyright Jim Paris 2011-2017
DIRECT HIT®
C43r in (what it can go through) 100 mm lines
The C43r front turbo nozzle works in any of the 150mm pipe combinations shown below.
NO
NO
NO
Over 34 l/min in 150mm lines
Penetrate, cut, clean and adjust assembly front turbo nozzle only
Penetrate& cut
tree rootsFAST
Unblockblockages
causedby
WIPES
Cleandrain walls
Unblockgrease,soapetc.
Removesandfrom
lines &grates
Ice in
drains
Clean manholes, shafts,pits& hydro excavate
Adjustassembly
to suit100 &
150 lines
YESYES
YESYESYESYESYES YESYES YESYES
YESYES YES YESYES NO YES
Put a
SMILEon your
face
C43rin 150mm
lines
80 mmP.V.CBend
90 mmP.V.CBend
100 mm P.V.C 88º Junction
100 mm P.V.C 88º Junction
100 mm P.V.C 90º I.O
100 mmP.V.CBend
100 mmTerracotta
Boundary Trap
50 mmMin Access No 50 mm Bend
150 mm PVC& Terracotta
Boundary Trap
#
36
D.H
Actual Size of DC43 and AssemblyPenetrator Cutter(Penetrator and Cutter with Front and Back Angle Adjustment)
D.H
D.H
Under34 l/min
or 10 gpm
used in150 mm
linesDC43
With ring kit
front & back 30º SS
reverse turbo nozzlewith
tungsten carbide seat
www.DirectHitSewerNozzles.com
The Ring can be fitted on the front or back
™
scaleddown
30º
30º
BACK TURBO NOZZLE
FRONT TURBO NOZZLE
PCT/AU2012/000326
Copyright Jim Paris 2011-2017#
37
DIRECT HIT®
DC38 back-to-back (front and back reverse turbo nozzles)
NONO NO
The DC43 back-to-back works in any of the 150mm pipe combinations shown below.
DC43 back-to-back in (what it can go through) 100 mm lines
Under 34 l/min in 150mm lines
www.DirectHitSewerNozzles.com
Cleandrain walls
Unblockgrease,soapetc.
Removesandfrom
lines &grates
Ice in
drains
Clean manholes, shafts,pits& hydro excavate
Adjustassembly
to suit100 &
150 lines
Cut tree roots
FAST
Penetrate tree roots
FAST
YESYESYESYESYES YESYES YESYES YES
YES YES YESYES YES YES
Put a
SMILEon your
face
DC43back-to-back
in 150mmlines
80 mmP.V.CBend
90 mmP.V.CBend
100 mm P.V.C 88º Junction
100 mm P.V.C 88º Junction
100 mm P.V.C 90º I.O
100 mmP.V.CBend
100 mmTerracotta
Boundary Trap
50 mmMin Access No 50 mm Bend
Because we are continuously improving our products and services, Direct Hit reserves the right to change the specifications and prices without prior notice.
150 mm PVC& Terracotta
Boundary Trap
Copyright Jim Paris 2011-2017#
38
30º
BACK TURBO NOZZLE
PCT/AU2012/000326
CAP
Actual Size of DC43 AssemblyCutter (Cutter with Back Angle Adjustment)
Under34 l/min
or 10 gpm
used in150 mm
lines
www.DirectHitSewerNozzles.com
cap
cap
D.H
D.H
You can add a Ring cap with 100-150 mm ring.
™DC43front cap & back
30º SS reverse turbo nozzle
with tungsten carbide seat
scaleddown
Copyright Jim Paris 2011-2017#
39
DIRECT HIT®
DC43 cap-to-back (capped front and back reverse turbo nozzle)
NONO NO
The DC43 cap-to-back works in any of the 150mm pipe combinations shown below.
DC43 cap-to-back in (what it can go through) 100 mm lines
Under 34 l/min in 150mm lines
www.DirectHitSewerNozzles.com
cut, clean & adjust from back turbo nozzle
Cleandrain walls
Unblockgrease,soapetc.
Removesandfrom
lines &grates
Ice in
drains
Clean manholes, shafts,pits& hydro excavate
Adjustassembly
to suit100 &
150 lines
Cut tree roots
FAST
Penetrate tree roots
FAST
YESYES
YESYESNO YESYES YESYES YESYES YES
YES YES YESYES YES YES
Put a
SMILEon your
face
DC43cap-to-backin 150mm
lines
80 mmP.V.CBend
90 mmP.V.CBend
100 mm P.V.C 88º Junction
100 mm P.V.C 88º Junction
100 mm P.V.C 90º I.O
100 mmP.V.CBend
100 mmTerracotta
Boundary Trap
50 mmMin Access No 50 mm Bend
Because we are continuously improving our products and services, Direct Hit reserves the right to change the specifications and prices without prior notice.
150 mm PVC& Terracotta
Boundary Trap
Copyright Jim Paris 2011-2017#
40
This catalogue is designed to be viewed twopages at a time.
To view it in Adobe Reader: 1. right click on view top left corner
2. go down to page display
right click on two page view3.
4. right click on arrow
Copyright Jim Paris 2011-2017#
41
Over34 l/min
or 10 gpm
www.DirectHitSewerNozzles.com
What assemblies to usein 100 mm lines
when your jetter is rated at:
over 34 litres per minute
Step 1 Use the C38rs or the C43rs to
penetrate, unblock, cut and flush out the debris up stream or down stream.
With the C38rs and C43rs, you only need a 50 mm entry point.
Note : You can use the DC43T back to back turbo nozzle assembly
first go.
Step 2
If you find with the CCTV that the tree rootshave not been all cut,
use the DC43T cap to back turbo nozzle on its own or with ring adjustment.
This assembly cuts dead roots.
Copyright Jim Paris 2011-2017#
# 42
front and back view
C38rs C43rsThe safest way entering an
unknown blockage
Actual Size of C38rs and C43rs AssembliesPenetrator
EXTREME PENETRATORfront 24º SS
reverse turbo nozzlewith
tungsten carbide seatsand back 3, 4 or 6
ceramic jets
ALL ROUNDERPENETRATORfront 30º SS
reverse turbo nozzlewith
tungsten carbide seatsand back 3, 4 or 6
ceramic jets
™ ™
30º
PCT/AU2012/000326
24º
PCT/AU2012/000326
24° 30°
The C38rs and C43rs assemblies are used to penetrate & cut forward with a turbo nozzle soft or hard materials, they flushe out all debris from the line without changing nozzles up stream
or down stream through a 50 mm access point. Penetrator with front angle adjustment.
www.DirectHitSewerNozzles.com
YES
100 mm P.V.C 88º Junction
YESYES
Unblockblockages
causedby
WIPES
Copyright Jim Paris 2011-2017
Under or Over34 l/min
or 10 gpm
PCT/AU2012/000326PCT/AU2012/000326
30º24º
# 43
C38rs and C43rs in 150mm lines (cut with front turbo nozzle)
C38rs and C43rs in (what it can go through) 100 mm lines
The C38rs & C43rs works in any of the 100mm pipe combinations shown below.
NO
Over 34 l/min in 100mm lines
DIRECT HIT®
Penetrate, cut, clean and adjust assembly front turbo nozzle only
Penetrate& cut
tree rootsFAST
Unblockblockages
causedby
WIPES
Cleandrain walls
Unblockgrease,soapetc.
Removesandfrom
lines &grates
Ice in
drains
Clean manholes, shafts,pits& hydro excavate
Adjustassembly
to suit100 &
150 lines
YESYES
YESYESYESYESYES YESYES YESYES
YESYESYES YESYES YESYES YES YES
www.DirectHitSewerNozzles.com
Put a
SMILEon your
face
C38rs &C43rs
in 100mmlines
80 mmP.V.CBend
90 mmP.V.CBend
100 mm P.V.C 88º Junction
100 mm P.V.C 88º Junction
100 mm P.V.C 90º I.O
100 mmP.V.CBend
100 mmTerracotta
Boundary Trap
50 mmMin Access No 50 mm Bend
Because we are continuously improving our products and services, Direct Hit reserves the right to change the specifications and prices without prior notice.
150 mm PVC& Terracotta
Boundary Trap
Copyright Jim Paris 2011-2017
44
Actual Size of a DC38T AssemblyPenetrator-Cutter(Penetrator and Cutter with Front and Back Angle Adjustment)
DC38TWith Ring Kit
front & back 24º SS reverse turbo nozzles
with tungsten carbide seats
and thruster with M5
ceramic jets
Over34 l/min
or 10 gpm
used in100 mm
lines™
www.DirectHitSewerNozzles.com
C38rsThruster
15º
Copyright Jim Paris 2011-2017
BACK TURBO NOZZLE
24º
BACK TURBO NOZZLE
PCT/AU2012/000326
scaleddown
#
45www.DirectHitSewerNozzles.com
Because we are continuously improving our products and services, Direct Hit reserves the right to change the specifications and prices without prior notice.
Copyright Jim Paris 2011-2017
DIRECT HIT®
cannot go down the red arrows.
cannot go down the red arrows.
NO NO NONO NONO NO NO
cut, clean & adjust from back turbo nozzle
Cleandrain walls
Unblockgrease,soapetc.
Removesandfrom
lines &grates
Ice in
drains
Clean manholes, shafts,pits& hydro excavate
Adjustassembly
to suit100 &
150 lines
Cut tree roots
FAST
Penetrate tree roots
FAST
YESYES
YESYESNO YESYES YESYES YESYES YES
YES
Put a
SMILEon your
face
DC43Tcap-to-backin 100mm
lines
80 mmP.V.CBend
90 mmP.V.CBend
100 mm P.V.C 88º Junction
100 mm P.V.C 88º Junction
100 mm P.V.C 90º I.O
100 mmP.V.CBend
100 mmTerracotta
Boundary Trap
50 mmMin Access No 50 mm Bend
Because we are continuously improving our products and services, Direct Hit reserves the right to change the specifications and prices without prior notice.
150 mm PVC& Terracotta
Boundary Trap
DIRECT HIT®
YESYES
YESYES
cut, clean & adjust from back turbo nozzle
DC38T back-to-back (front ring cap with back reverse turbo nozzle)
NO
NO NO NONO NONO NO NO
The DC38T back-to-back works in any of the 100mm pipe combinations shown below.
DC38T back-to-back in 100 mm lines (what can it go through, around, up or down)
Cleandrain walls
Unblockgrease,soapetc.
Removesandfrom
lines &grates
Ice in
drains
Clean manholes, shafts,pits& hydro excavate
Adjustassembly
to suit100 &
150 lines
Cut tree roots
FAST
Penetrate tree roots
FAST
YES YESYES YESYES YES
YES
Put a
SMILEon your
face
YES
DC38back-to-back
in 100mmlines
80 mmP.V.CBend
90 mmP.V.CBend
100 mm P.V.C 88º Junction
100 mm P.V.C 88º Junction
100 mm P.V.C 90º I.O
100 mmP.V.CBend
100 mmTerracotta
Boundary Trap
50 mmMin Access No 50 mm Bend
150 mm PVC& Terracotta
Boundary Trap
Over 34 l/min in 100mm lines
#
46
™
used in100 mm
lines
Over34 l/min
or 10 gpm
Actual Size of DC38T AssemblyCutter(Cutter with Back Angle Adjustment)
™
www.DirectHitSewerNozzles.com
DC38Tfront cap and back
24º SS reverse turbo nozzle
with tungsten carbide seatand thruster with 3 M5
ceramic jets
NO
100 mm using03 or 04 Hose
used in100 mm
lines
Over34 l/min
or 10 gpm
C38rsThruster
15º
Copyright Jim Paris 2011-2017
24º
BACK TURBO NOZZLE
CAP
PCT/AU2012/000326
scaleddown
#
47
DIRECT HIT®
cannot go down the red arrows.
cannot go down the red arrows.
NO NO NONO NONO NO NO
www.DirectHitSewerNozzles.com
cut, clean & adjust from back turbo nozzle
Cleandrain walls
Unblockgrease,soapetc.
Removesandfrom
lines &grates
Ice in
drains
Clean manholes, shafts,pits& hydro excavate
Adjustassembly
to suit100 &
150 lines
Cut tree roots
FAST
Penetrate tree roots
FAST
YESYES
YESYESNO YESYES YESYES YESYES YES
YES
Put a
SMILEon your
face
DC43Tcap-to-backin 100mm
lines
80 mmP.V.CBend
90 mmP.V.CBend
100 mm P.V.C 88º Junction
100 mm P.V.C 88º Junction
100 mm P.V.C 90º I.O
100 mmP.V.CBend
100 mmTerracotta
Boundary Trap
50 mmMin Access No 50 mm Bend
Because we are continuously improving our products and services, Direct Hit reserves the right to change the specifications and prices without prior notice.
150 mm PVC& Terracotta
Boundary Trap
Copyright Jim Paris 2011-2017
DIRECT HIT®
YESYES
YESYES
cut, clean & adjust from back turbo nozzle
DC38T cap-to-back (front ring cap with back reverse turbo nozzle)
NO
NO NO NONO NONO NO NO
The DC38T cap-to-back works in any of the 100mm pipe combinations shown below.
DC38T cap-to-back in 100 mm lines (what can it go through, around, up or down)
Cleandrain walls
Unblockgrease,soapetc.
Removesandfrom
lines &grates
Ice in
drains
Clean manholes, shafts,pits& hydro excavate
Adjustassembly
to suit100 &
150 lines
Cut tree roots
FAST
Penetrate tree roots
FAST
YES YESYES YESYES YES
YES
Put a
SMILEon your
face
YES
DC38cap-to-backin 100mm
lines
80 mmP.V.CBend
90 mmP.V.CBend
100 mm P.V.C 88º Junction
100 mm P.V.C 88º Junction
100 mm P.V.C 90º I.O
100 mmP.V.CBend
100 mmTerracotta
Boundary Trap
50 mmMin Access No 50 mm Bend
150 mm PVC& Terracotta
Boundary Trap
Over 34 l/min in 100mm lines
#
48
This catalogue is designed to be viewed twopages at a time.
To view it in Adobe Reader: 1. right click on view top left corner
2. go down to page display
right click on two page view3.
4. right click on arrow
Copyright Jim Paris 2011-2017#
49
Over34 l/min
or 10 gpm
www.DirectHitSewerNozzles.com
What assemblies to usein 150 mm lines
when your jetter is rated at:
over 34 litres per minute
Step 1 Use the C38rs, C43rs, C38r or C43r to
penetrate, unblock, cut and flush out the debris up stream or down stream.
With the C38rs, C43rs, C38r or C43r, you only need a 50 mm entry point.
Note : You can use the DC43T back to back turbo nozzle assembly
first go.
Step 2
If you find with the CCTV that the tree rootshave not been all cut,
use the DC43T cap to back turbo nozzle on its own or with ring adjustment.
This assembly cuts dead roots.
Copyright Jim Paris 2011-2017#
50www.DirectHitSewerNozzles.comCopyright Jim Paris 2011-2017
front and back view
C38rs C43rsThe safest way entering an
unknown blockage
Actual Size of C38rs and C43rs AssembliesPenetrator
™ ™
30º
PCT/AU2012/000326
24º
PCT/AU2012/000326
24° 30°
The C38rs and C43rs assemblies are used to penetrate & cut forward with a turbo nozzle soft or hard materials, they flushe out all debris from the line without changing nozzles up stream
or down stream through a 50 mm access point. Penetrator with front angle adjustment.
YES
100 mm P.V.C 88º Junction
YESYES
Unblockblockages
causedby
WIPES
Under or Over34 l/min
or 10 gpm
PCT/AU2012/000326PCT/AU2012/000326
EXTREME PENETRATORfront 24º SS
reverse turbo nozzlewith
tungsten carbide seatsand back 3, 4 or 6
ceramic jets
ALL ROUNDERPENETRATORfront 30º SS
reverse turbo nozzlewith
tungsten carbide seatsand back 3, 4 or 6
ceramic jets
30º24º
#
51
C38rs and C43rs in 150mm lines (cut with front turbo nozzle)
C38rs & C43rs in (what it can go through) 100 mm lines
The C38rs & C43rs works in any of the 150mm pipe combinations shown below.
NO
Over 34 l/min in 150mm lines
DIRECT HIT®
Penetrate, cut, clean and adjust assembly front turbo nozzle only
Penetrate& cut
tree rootsFAST
Unblockblockages
causedby
WIPES
Cleandrain walls
Unblockgrease,soapetc.
Removesandfrom
lines &grates
Ice in
drains
Clean manholes, shafts,pits& hydro excavate
Adjustassembly
to suit100 &
150 lines
YESYES
YESYESYESYESYES YESYES YESYES
YESYESYES YESYES YESYES YES YES
www.DirectHitSewerNozzles.com
Put a
SMILEon your
face
C38rs& C43rs
in 150mmlines
80 mmP.V.CBend
90 mmP.V.CBend
100 mm P.V.C 88º Junction
100 mm P.V.C 88º Junction
100 mm P.V.C 90º I.O
100 mmP.V.CBend
100 mmTerracotta
Boundary Trap
150 mmTerracotta
Boundary Trap
50 mmMin Access No 50 mm Bend
Because we are continuously improving our products and services, Direct Hit reserves the right to change the specifications and prices without prior notice.
Copyright Jim Paris 2011-2017#
52
front view turbo nozzle
back view 3, 4 or 6
ceramic jets
Actual Size of a C38R AssemblyPenetrator
24º
Extremeroot
penetrator
PCT/AU2012/000326
The C38r and C38rs assemblies are used to penetrate & cut forward with a turbo nozzle soft or hard materials, it flushes out all debris from the line without changing nozzles up stream
or down stream through a 50 mm access point. Penetrator with front angle adjustment.
C38r
100 mm using03 or 04 Hose
NO
™
Under or Over34 l/min
or 10 gpm
used in150 mm
lines
www.DirectHitSewerNozzles.com
YESYES
Unblockblockages
causedby
WIPES
Copyright Jim Paris 2011-2017
EXTREME PENETRATORfront 24º SS
reverse turbo nozzlewith
tungsten carbide seatsand back 3, 4 or 6
ceramic jets
30º front turbo nozzle
PCT/AU2012/000326
24º
#
53
DIRECT HIT®
C38r in 150mm lines (cut with front turbo nozzle)
C38r in (what it can go through) 100 mm lines
The C38r works in any of the 150mm pipe combinations shown below
NO
NO
NONO
Over 34 l/min in 150mm lines
www.DirectHitSewerNozzles.com
Penetrate, cut, clean and adjust assembly front turbo nozzle only
Penetrate& cut
tree rootsFAST
Unblockblockages
causedby
WIPES
Cleandrain walls
Unblockgrease,soapetc.
Removesandfrom
lines &grates
Ice in
drains
Clean manholes, shafts,pits& hydro excavate
Adjustassembly
to suit100 &
150 lines
YESYESYESYES
YESYESYESYESYES YESYES YESYES
YES YESYES YES YES YES
Put a
SMILEon your
face
C38rin 150mm
lines
80 mmP.V.CBend
90 mmP.V.CBend
100 mm P.V.C 88º Junction
100 mm P.V.C 88º Junction
100 mm P.V.C 90º I.O
100 mmP.V.CBend
100 mmTerracotta
Boundary Trap
50 mmMin Access No 50 mm Bend
Because we are continuously improving our products and services, Direct Hit reserves the right to change the specifications and prices without prior notice.
150 mm PVC& Terracotta
Boundary Trap
Copyright Jim Paris 2011-2017#
# 54www.DirectHitSewerNozzles.com
Actual Size of C43r AssemblyPenetrator
C43r
The C43r assembly is used to penetrate & cut forward with a turbo nozzle soft or hard materials,thet flushe out all debris from the line without changing nozzles up stream or down stream
through a 50 mm access point. Penetrator with front angle adjustment.
™
3,4 or or 6 ceramic jets
30º front turbo nozzle
30º
PCT/AU2012/000326
cut betterin 150mm
lines
Copyright Jim Paris 2011-2017
back view 3, 4 or 6
ceramic jets
100 mm using03 or 04 Hose
NO
Under or Over34 l/min
or 10 gpm
used in150 mm
lines
ALL ROUNDERPENETRATORfront 30º SS
reverse turbo nozzlewith
tungsten carbide seatsand back 3, 4 or 6
ceramic jets
30º
PCT/AU2012/000326
# 55
DIRECT HIT®
C43r in (what it can go through) 100 mm lines
The C43r front turbo nozzle works in any of the 150mm pipe combinations shown below.
NO
NO
NO
Over 34 l/min in 150mm lines
www.DirectHitSewerNozzles.com
Penetrate, cut, clean and adjust assembly front turbo nozzle only
Penetrate& cut
tree rootsFAST
Unblockblockages
causedby
WIPES
Cleandrain walls
Unblockgrease,soapetc.
Removesandfrom
lines &grates
Ice in
drains
Clean manholes, shafts,pits& hydro excavate
Adjustassembly
to suit100 &
150 lines
YESYES
YESYESYESYESYES YESYES YESYES
YESYES YES YESYES NO YES
Put a
SMILEon your
face
C43rin 150mm
lines
80 mmP.V.CBend
90 mmP.V.CBend
100 mm P.V.C 88º Junction
100 mm P.V.C 88º Junction
100 mm P.V.C 90º I.O
100 mmP.V.CBend
100 mmTerracotta
Boundary Trap
50 mmMin Access No 50 mm Bend
Because we are continuously improving our products and services, Direct Hit reserves the right to change the specifications and prices without prior notice.
150 mm PVC& Terracotta
Boundary Trap
Copyright Jim Paris 2011-2017
56
Actual Size of DC43T and AssemblyPenetrator Cutter(Penetrator and Cutter with Front and Back Angle Adjustment)
DC43TWith Ring Kit
front & back 30º SS reverse turbo nozzle
with tungsten carbide seats
and thruster with M6
ceramic jets
www.DirectHitSewerNozzles.com
Over34 l/min
or 10 gpm
used in150 mm
lines
C38rsThruster
15º
™
30º
30º
BACK TURBO NOZZLE
FRONT TURBO NOZZLE
PCT/AU2012/000326
scaleddown
Copyright Jim Paris 2011-2017#
57
NO
DIRECT HIT®
DC43T back-to-back (front and back revere turbo nozzle6)
NONO NO
DC43T back-to-back in (what it can go through) 100 mm lines
Over 34 l/min in 150 mm lines
The DC43T back-to-back works in any of the 150mm pipe combinations shown below
www.DirectHitSewerNozzles.com
Cleandrain walls
Unblockgrease,soapetc.
Removesandfrom
lines &grates
Ice in
drains
Clean manholes, shafts,pits& hydro excavate
Adjustassembly
to suit100 &
150 lines
Cut tree roots
FAST
Penetrate tree roots
FAST
YESYESYES YESYES YESYES YES YES
YES YESYES YES YES
Put a
SMILEon your
face
DC43Tback-to-back
in 150mmlines
80 mmP.V.CBend
90 mmP.V.CBend
100 mm P.V.C 88º Junction
100 mm P.V.C 88º Junction
100 mm P.V.C 90º I.O
100 mmP.V.CBend
100 mmTerracotta
Boundary Trap
50 mmMin Access No 50 mm Bend
Because we are continuously improving our products and services, Direct Hit reserves the right to change the specifications and prices without prior notice.
150 mm PVC& Terracotta
Boundary Trap
Copyright Jim Paris 2011-2017#
58
Actual Size of DC43T AssemblyCutter (Cutter with Back Angle Adjustment)
Over34 l/min
or 10 gpm
used in150 mm
lines
www.DirectHitSewerNozzles.com
DC43Tfront cap and back
30º SS reverse turbo nozzle
with tungsten carbide seatand thruster with 3 M5
ceramic jets
™
NO
100 mm using03 or 04 Hose
C38rsThruster
15º
30º
BACK TURBO NOZZLE
PCT/AU2012/000326
CAP
Copyright Jim Paris 2011-2017
scaleddown
#
59
DIRECT HIT®
DC43T cap-to-back (capped front and back reverse turbo nozzle)
NO
NONO NO
The DC43T cap-to-back works in any of the 150mm pipe combinations shown below.
DC43T cap-to-back in (what it can go through) 100 mm lines
Over 34 l/min in 150mm lines
www.DirectHitSewerNozzles.com
cut, clean & adjust from back turbo nozzle
Cleandrain walls
Unblockgrease,soapetc.
Removesandfrom
lines &grates
Ice in
drains
Clean manholes, shafts,pits& hydro excavate
Adjustassembly
to suit100 &
150 lines
Cut tree roots
FAST
Penetrate tree roots
FAST
YESYES
YESYESYESYES YESYES YESYES YES
YES YESYES YES YESNO
Put a
SMILEon your
face
DC43Tcap-to-backin 150mm
lines
80 mmP.V.CBend
90 mmP.V.CBend
100 mm P.V.C 88º Junction
100 mm P.V.C 88º Junction
100 mm P.V.C 90º I.O
100 mmP.V.CBend
100 mmTerracotta
Boundary Trap
50 mmMin Access No 50 mm Bend
Because we are continuously improving our products and services, Direct Hit reserves the right to change the specifications and prices without prior notice.
150 mm PVC& Terracotta
Boundary Trap
Copyright Jim Paris 2011-2017#
60
This catalogue is designed to be viewed twopages at a time.
To view it in Adobe Reader: 1. right click on view top left corner
2. go down to page display
right click on two page view3.
4. right click on arrow
Copyright Jim Paris 2011-2017#
61
Back-to-Back Back-to-BackCap-to-Back
C43r C43r
Cap-to-Back
C43r
Back-to-Back Back-to-Back
C38rC38rC38rs C43rs
Back-to-Back
yes yesyes yesyes
yesyes
yes
80mm 100mm100mm 100mm
yesyes yesyesyesyes
24º24º
0.785 kg0.506 kg 0.670 kg 0.662 kg 1.00 kg1.00 kg 0.963 kg
5000psi 5000psi5000psi 5000psi5000psi 5000psi5000psi
30º30º
30º 30º30º 30º 30º30º 30º
24º24º
yesyesyes
yes
yes
caped
caped
yes
50 - 300* mm 50 - 300* mm 50 - 300* mm 50 - 300* mm 50 - 300* mm50 - 300* mm 50 - 300* mm
38 x 103 mm 38 x 132 mm38 x 96 mm 43 x 96 mm 43 x 128 mm43 x 128 mm 43 x 125 mm
20 - 190+ Lt20 - 190+ Lt 20 - 190+ Lt 25 - 190+ Lt 34 - 190+ Lt34 - 190+ Lt 34 - 190+ Lt
80mm
50mm50mm50mm50mm50mm50mm50mm
150mm150mm
150mm100mm
100mm
100mm
150mm
150mm
100mm100mm
100mm
100mm
100mm
100mm
150mm
150mm
Cap
PCT/AU2012/000326
24º
Extremeroot
penetrator
PCT/AU2012/000326
PCT/AU2012/000326
Extremeroot
penetrator
24º
Cap
PCT/AU2012/000326
C43FN24
24º
PCT/AU2012/000326
Extremeroot
penetrator
30º
PCT/AU2012/000326
02-08 bsp 02-08 bsp 02-08 bsp 06-08 bsp 06-08 bsp 06-08 bsp 06-08 bsp
www.DirectHitSewerNozzles.com
Connecting thread tocarriage in inches
Front reverse turbo
What inspection shaft can it go down?
Output litres
Weight (kg)
Recycling
max
Maximum pressure (psi)
xLMeasures (mm)
Back 3 or 6 ceramic jets
What 90º bend can itgo around?
What riser can it go up or down stream?
Minimum accessinto a pipe IDF
Front angel turbo jet
xL
max
F
Back jet angel FB
FB
Application range
Extremeroot
penetrator
30º
Extremeroot
penetrator
PCT/AU2012/000326
DIRECT HIT®
SEWER NOZZLES
Because we are continuously improving our products and services, Direct Hit reserves the right to change the specifications and prices without prior notice.
Copyright Jim Paris 2011-2017#
62
Back-to-Back Cap-to-Back
DC43
Back-to-Back
DC38
Cap-to-Back
DIRECT HIT®
SEWER NOZZLES
Back-to-Back
02-04 bsp 02-04 bsp 02-04 bsp 02-04 bsp 02-04 bsp 04-06 bsp
yes
yes
20-34 Lt 15-34 Lt 20-34 Lt 20-34 Lt 15-34 Lt 15-150 Lt
yes
yes
yes
yes
yes no
yes yes
100mm
100mm
100mm
yes yesyes
100mm
100mm
100mm
yes
100mm
100mm
100mm
100mm
100mm100mm
24º
24º 24º
1.520
5000 5000 5000 5000 5000 5000
1.340 1.495 1.535 1670.00 424.00
30º
30º 30º
30º 15º24º
yes
yes
yes
no no
capped capped capped
yes
100mm 100mm
100mm 100mm
100mm 100mm
yes
yes
yes
yes
100 - 150 100 - 300* 100 - 150 100 - 150 100 - 300* 100 - 300*
43 x 15643 x 15838 x 13338 x 162 43 x 132 38 x 71
30º
100mm 150mm100mm 100mm100mm 100mm
30º30º 30º30º24º 24º
24º24º
30º
www.DirectHitSewerNozzles.com
Connecting thread tocarriage in inches
Front reverse turboB
Back jet angel
What inspection shaft can it go down?
Output litres
Weight (kg)
max
Maximum pressure (psi)
xLMeasures (mm)
What 90º bend can itgo around?
What riser can it go up or down stream?
FFront angel turbo jet
xL
max
F
B
Back angel turbo jet B
Minimum accessinto a pipe ID
Application range
Back reverse turbo
PCT/AU2012/000326PCT/AU2012/000326
cap cap
PCT/AU2012/000326
Add a 3, 4 or 6 CeramicM6 jet ThrusterPCT/AU2012/000326
C38RST
Back jets
15ºPCT/AU2012/000326
Copyright Jim Paris 2011-2017
Because we are continuously improving our products and services, Direct Hit reserves the right to change the specifications and prices without prior notice.
#
63
This catalogue is designed to be viewed twopages at a time.
To view it in Adobe Reader: 1. right click on view top left corner
2. go down to page display
right click on two page view3.
4. right click on arrow
Copyright Jim Paris 2011-2017#
64
Direct Hit C38RS & C43RS Starter Kit
Direct Hit C43R Starter Kit
Description
C38RS Assembly
C38R Assembly
Pipe SizeItem #
RSC38SKIT
RC38SKIT
Description
C43R Assembly
Pipe Size
RC43SKIT
Item #
C43RS AssemblyRSC43SKIT
The Penetrator Starter Kit Range with Front Angle Adjustment
www.DirectHitSewerNozzles.com
Because we are continuously improving our products and services, Direct Hit reserves the right to change the specifications and prices without prior notice.
Copyright Jim Paris 2011-2017
100 - 450 mm (4" -18")
100 - 450 mm (4" -18")
100 - 450 mm (4" -18")
100 - 450 mm (4" -18")
#
65
What is included in the Penetrator Starter Kit Range with Front Angle Adjustment
C38RS EXTREME Penetrator
C43R ALL PURPOSE Penetrator
C43RS ALL PURPOSE Penetrator
C38R EXTREME Penetrator
C43RC38R
C38RS C43RS
DHSPANR DHSPANR
DHSPANR DHSPANR
DHSPANO X 2
DHSPANR
DHSPANO X 2
DHSPANR
C38RS
PCT/AU2012/000326
24º
C38R
24º
PCT/AU2012/000326
C43R
30º
PCT/AU2012/000326
Over34 l/min
or 10 gpm
Under orover
34 l/minor 10 gpm
Under orover
34 l/minor 10 gpm
Under orover
34 l/minor 10 gpm
front 24º and back 30° front 30º and back 30°
front 24º and back 30° front 30º and back 30°
30º
PCT/AU2012/000326
Front Angle Adjustable (from 100 mm (4") line)
Front Angle Adjustable (from 150 mm (6") line)
Front Angle Adjustable (from 100 mm (4") line)
Front Angle Adjustable (from 150 mm (6") line)
C43RS
Copyright Jim Paris 2011-2017 www.DirectHitSewerNozzles.com
Because we are continuously improving our products and services, Direct Hit reserves the right to change the specifications and prices without prior notice.
#
66www.DirectHitSewerNozzles.com
Direct Hit DC38 & DC43 Starter Kits
Direct Hit C38rsT Starter Kits
Description
DC38 Cap Assembly
Pipe SizeItem #
DC38CSKIT
Description
DC43 Cap Assembly
Pipe Size
DC43CSKIT
Item #
The Penetrator and Cutter Starter Kit Range with Front and Back Angle Adjustment
Because we are continuously improving our products and services, Direct Hit reserves the right to change the specifications and prices without prior notice.
Copyright Jim Paris 2011-2016
C38RST Assembly 100 - 450 mm (4" -18")
100 - 300 mm (4" -12")
100 - 300 mm (4" -12")
C38RSTKIT
Copyright Jim Paris 2011-2017#
67
DC38Cap xBack
DC43Cap xBack
DHSPANO
DHSPANR
DHSPANO
DHSPANR
Under34 l/min
or 10 gpm
Under34 l/min
or 10 gpm
DC38 cap-to-back
front 0º and back 30°
DC43 cap-to-back
front 0º and back 30°
www.DirectHitSewerNozzles.com
DC38 Cutter DC43 Cutter
Back Angle Adjustable Cutter Back Angle Adjustable Cutter
What is included in the Penetrator and Cutter Starter Kit Range with Front and Back Angle Adjustment
ring cap to backturbo nozzle
24º
cap
30º
cap cap
C38RST
DHSPANO
DHSPANO
Over37 l/min
or 10 gpm
C38RST
back 15° ceramic jets
C38RST Thruster
Front 1/4" bspp x back 3/8 bspp female threads
PCT/AU2012/000326
What is included in the Thruster Starter Kit Range
Copyright Jim Paris 2011-2017
Because we are continuously improving our products and services, Direct Hit reserves the right to change the specifications and prices without prior notice.
#
68
38 mm Surface Cleaning & Hydro Excavation 24º Turbo Nozzle includes nipple
43 mm Surface Cleaning & Hydro Excavation 30º Turbo Nozzle includes nipple
HE38DH
Description
Description
Description
C38 Carriage
38 mm Short Cap includes connector
38 mm Back 24º Turbo Nozzle
38 mm Ring Cap includes connector
C38r Carriage includes 3 x M6 Ceramic Jets
C43rs Carriage includes 3 x M6 Ceramic Jets
C38rs Carriage includes 3 x M6 Ceramic Jets
C43r Carriage includes 3 x M6 Ceramic Jets
38 mm Front 24º Nozzle and connector
43 mm Front 30º Nozzle connector
43 mm Short Cap includes connector
43 mm Front 30º Turbo Nozzle
43 mm Front 24º Nozzle connector
43 mm Ring Cap includes connector
38 mm C38RST Thruster Includes 3 x M6 15º Ceramic Jets
M6 Ceramic Jet
C38CARR
C38CAP
BN38DH
C38RCAP
T38RS
M6JET
HE38HD
R38CARR-3J
RS43CARR-3J
RS38CARR-3J
R43CARR-3J
C43 CarriageC43CARR
Item #
Item #
Item #
FN38DH
FN43DH
C43CAP
BN43DH
FN43DH24
C43RCAP
Build your own Direct Hit Assembly Kit!
www.DirectHitSewerNozzles.com
HE43DH
Because we are continuously improving our products and services, Direct Hit reserves the right to change the specifications and prices without prior notice.
38 mm Heavy Duty Hydro Excavation 24º Turbo Nozzle includes nipple
Copyright Jim Paris 2011-2017
Description
Direct Hit Ring SS Spanner
Direct Hit Open SS Spanner
.
DHSRAN-R
DHSRAN-0
Item #
Circlip Plier 19-60mmCIPCLIP-P
SS Hose Kit 02 - 1/8 02-02 or 04-02 Swivel Connector Includes Dowty Washer
SS Hose Kit 04 - 1/4 02-04 or 04-02 Swivel Connector Includes Dowty Washer
SS Hose Kit 06 - 3/8 04-06 Swivel Connector Includes Dowty Washer
SS Hose Kit 05 - 1/2 04-08 Swivel Connector Includes Dowty Washer
.
HOSECON-02
HOSECON-04
HOSECON-06
HOSECON-08
#
69
24ºExtreme
rootpenetrator
24ºExtreme
rootpenetrator
38 SHORT CAP 43 SHORT CAP 43 RING CAP
reverse turbonozzle
30º
DH FRONT 24°NOZZLE
DH FRONT 30°NOZZLE
DH FRONT 24°NOZZLE FOR 43 CARRIAGE
43 43 43
C38RC43RS C43RC43
43
C38
38 38 38
cap
38 RING CAP
cap cap cap
PCT/AU2012/000326PCT/AU2012/000326
C38R CARRIAGEINCLUDES 3 x M6 CERAMIC JETS
C43RS EXTRA CARRIAGE
INCLUDES 3 x M6 CERAMIC JETS
C43R CARRIAGEINCLUDES 3 x M6 CERAMIC JETS
C38CARRIAGE
C43CARRIAGE
DH BACK 24°NOZZLE
DH BACK 30°NOZZLE
38 43
reverse turbonozzle
30º24º
reverse turbonozzle
38 MM THRUSTERINCLUDES 3
CERAMIC JETS
M6C38RST
M6CERAMIC JET
www.DirectHitSewerNozzles.com
C38RS
C38RS EXTRA CARRIAGE
INCLUDES 3 x M6 CERAMIC JETS
PCT/AU2012/000326
PCT/AU2012/000326
DH SURFACECLEANING24°NOZZLE
DH SURFACECLEANING30°NOZZLE
HEAVY DUTYDH HYDRO
EXCAVATION24°NOZZLE
3838HD 43
reverse turbonozzle
30º24º
reverse turbonozzle
PCT/AU2012/000326
Copyright Jim Paris 2011-2017
COMMING
SOON
Because we are continuously improving our products and services, Direct Hit reserves the right to change the specifications and prices without prior notice.
CIRCLIP PLIERDHSPANO CIRCLIP PLIERSDHSPANR
38 - 43 38 - 43 38 - 43 02 04 06 08
O2 SS CONNECTOR
O4 SS CONNECTOR
O6 SS CONNECTOR
O8 SS CONNECTOR
#
70
Description
Description
Description
Description
SS Safety pipe to suit Assembly (Note: will be quoted as per specifications)
.
.
SPIPE
Item #
Item #
Item #
Item #
38 mm x 100 mm Ring
38 mm x 100 mm Ring
38 mm x 100 mm Ring
38 mm x 100 mm Ring
38 mm x 100 mm Ring
38 mm 90° SS Bend turbo nozzle connector
38 mm 90° SS Straight turbo nozzle connector
43 mm x 100 mm Ring
38 mm x 150 mm Ring
38 mm x 150 mm Ring
38 mm x 150 mm Ring
38 mm x 150 mm Ring
38 mm SS Circlip
42 mm SS Circlip
38 mm x 150 mm Ring
43 mm x 150 mm Ring
04 SS Dowty Washer
06 SS Dowty Washer
04 SS M X F Pipe Extension for the Gun with Dowty washer
5000 Psi Gun Kit
DH38RING-100
DH38RING-100-SS
DH43RING-100-SS
DH38RING-225-SS
DH43RING-225-SS
DH38BC
DH43RING-100
DH38RING-150
DH38RING-150-SS
DH43RING-150-SS
DH38RING-300-SS
DH38CIRCLIP-SS
DH43CIRCLIP-SS
DH43RING-300-SS
DH38SC
DH43RING-150
04SSDOWTY
06SSDOWTY
www.DirectHitSewerNozzles.com
Centraliser to be used on the C38 and C43 carriage assembliesCENT
Because we are continuously improving our products and services, Direct Hit reserves the right to change the specifications and prices without prior notice.
DHSSP900
5KPSIGUN
Copyright Jim Paris 2011-2017#
71
38 - 43 38 - 43 04 06 04 GUN
www.DirectHitSewerNozzles.com
S.PIPE
SAFETY PIPE TO SUIT
ASSEMBLY CENTRALISER
C38+43
Copyright Jim Paris 2011-2016
04SSDOWTY 04SSDOWTYDH38BC DH38SC DHSSP900
1 x Gun 5000 PSI1 x 3/8 M x 1/4 F Reducer1 x 1/4 M quick connect plug1 x 1/4 coupler F1 x 1/4 m to 1/4 swivel 1 X 1/4 x 1/4 swivel for skid
Copyright Jim Paris 2011-2017
100 MM 150 MM
DH43RIN DH43RINGS DH43RINGS
DH43RINGS
DH43RINGS
DH43RINGS
DH43RINGS
DH43RINGS
DH43RINGS
DH43RINGS
DH43RINGS
DH43RINGS
38 mm Circlip
42 mm Circlip
100mm 150mm
38 ALU 38 ALU 38 ALU
43 SS 43 SS
38 SS 38 SS
43 SS
38 SS
43 SS
38 SS
43 SS43 ALU 43 ALU
100 MM (4")ALUM RING
100 MM (4")ALUM RING
100 MM (4")SS RING
100 MM (4")SS RING
150 MM (6")SS RING
150 MM (6")SS RING
225 MM (9")SS RING
225 MM (9")SS RING
300 MM (12")SS RING
300 MM (12")SS RING
150 MM (6")ALUM RING
150 MM (6")ALUM RING
#
72www.DirectHitSewerNozzles.com
C43rs demonstration cut a 100 mm hole through a 14mm pine timber with
25 litres @ 5000 psi pump
C43rs demonstration cut a 100 mm hole through a 14mm pine timber with a Harben
55 litres @ 4000 psi pump
DC43 ring cap and back nozzle demonstration cut a 100 mm hole through a 18 mm pine timber
with a A R 21 litres @ 5000 psi pump
DC38 ring cap and back nozzle demonstration cut a 100 mm hole through a 14 mm timber
with a 20 litres @ 4000 psi pump
C38rs
Copyright Jim Paris 2011-2017#
73
Direct Hit assemblies C38r and C43r
Direct Hit assemblies C38r and C43r
Direct Hit Assembly Photos
Direct Hit assemblies C38r and C43r
Direct Hit assemblies C38rs, DC38, DC43 and DC43t
Direct Hit assemblies C38rs, C38r, C43r and C43rs
www.DirectHitSewerNozzles.com
C38r
C38r
C38r
C38r
C38r
C38r
C38r
C43r
C43r
C43r
225mm
150mm
100mm
150mm
100mm225mm
C43r
circlips
C38rs DC43tDC43DC38
Copyright Jim Paris 2011-2017#
# 74Cat Rev: 22/04/2017