2016 Kline Catalog

1Product Catalog

2

Our Company

loganinternationalinc.com [email protected]

+1 918.445.0588

Logan Kline Tools has been a leading manufacturer of downhole tools for the well servicing industry for more than 30 years. We manufacture a wide variety of specialized oilfield equipment to meet your well servicing needs.

If you’re ready to maximize the performance of your customer’s well, we’re ready to provide solutions.

With more than 30 years of experience manufacturing quality downhole tools, Logan Kline Tools has become a recognized leader in well servicing equipment. We take pride in delivering outstanding craftsmanship and innovation with every order.

That’s one of the reasons our customer base continues to grow throughout the United States and around the world. Whether you are a long-time customer, or you’re considering Logan Kline Tools for the very first time, we look forward to helping make your projects a success. No matter what your well servicing needs may be, Logan Kline Tools is ready to deliver exceptional tools and solutions to meet your exacting specifications.

Thank you for your interest in Logan Kline Tools.

Our Products

• Packers• Bridge Plugs• Tubing Swivels• Scab Liner Assemblies• Retrieving Tools• Tubing Anchors• Unloading Valves• Collar Locators• K-Frac Liner System

Headquarters 8531 East 44th St. Tulsa, Oklahoma 74145-4826 +1 918.445.0588

Field Offices

Texas 651 McDonald Street Odessa, TX 79761-6106 +1 855.278.7888

Dubai Jebel Ali Free Zone South Dubai, United Arab Emirates+71.4. 8138000

3

Table of Contents


+1 918.445.0588

Introduction ..............................................................1

Table of Contents ....................................................2

Service Tools

Crest III Packer ...........................................................3CPW Retrievable Squeeze Packer ......................4Transpack Cementer...............................................5K-10 Packer ................................................................6WLTC Retrievable Bridge Plug ............................7

Service Accessories

Spring-Loaded Overshot ......................................8Locking Compression Unloader.........................9Tension Unloader ................................................. 10Tubing Swivel ......................................................... 11Mechanical Collar Locator ................................. 12Pressure Balanced Equalizing Valve ............... 13Downhole Shutoff Valve .................................... 14CPW Perf Wash Assembly .................................. 15

Production Tools

KS1-XW Packer ....................................................... 16KS-3 Packer ............................................................. 17Anchor Catcher (Lockdown) ............................. 18Anchor Catcher (Lockdown) HD ..................... 19Hydraulic Tandem Packer .................................. 20Big Bore Tubing Packer ....................................... 21Scab Liner Assembly ........................................... 22Tubing Anchor/Catcher ...................................... 23Dual String Anchor .............................................. 24Downhole Swivel Join ........................................ 25Hydraulic Tubing Drain ....................................... 26

K-Frac Fracturing Liner System

Hydraulically Actuated Starter Valve ...........27Fracturing Stimulation Valve ..........................28Running Tool ........................................................29Flow Lock Collar ..................................................30Open Hole Packer ...............................................31Open Hole Anchor .............................................32Open Hole Reamer .............................................33Bi-Directional Hydraulic Shifting Tool .........34Liner Hanger Packer ..........................................35

4

Crest III Packer


+1 918.445.0588

OVERVIEW

Logan’s Crest III Packer is a weight set service packer for high-pressure remedial work such as acidizing, fracturing, and squeeze cementing. It sets with minimal tubing manipulation and will withstand differential pressure from above or below.

When set, a balance piston is actuated as pressure increases, downward force is exerted on the inner mandrel, thus ensuring the equalizing valve is not pumped open.

A large integral fluid bypass allows the packer to be run quickly with minimal chance of swabbing off packing elements or dulling hold-down slips. Rotation is not required to retrieve the tool, and its equalizing valve opens with the first upward movement.

Standard equipment includes carbide tipped hold-down slips, lower slips, and drag blocks.

Size * (in) Weight (lbs)Gauge Ring OD

(in)Packer Bore (in) Connection

3.50 7.7 – 9.3 2.844 1.25 1.900 EU10Rd

4.00 9.5 – 11.6 3.281 1.50

13.5 – 16.6 3.562

9.5 – 13.5 3.771 1.875 2.375 EU8Rd

15 – 18 4.125

11.5 – 15 4.250

20 – 23 4.500

14 – 17 4.641

13 – 15.5 4.781

6.625 20 – 24

32 – 38

26 – 35 5.844

23 – 29 5.969

17 – 26 6.078

33 – 39 6.453

24 – 29.7 6.672

40 – 49 7.344

32 – 40 7.562

24 – 32 7.735

43.5 – 53.5 8.250

9.625 36 – 47 8.475

32.3-43.5 8.562

2.00

2.875 EU8Rd

5.750

2.507

3.50 EU8Rd3.00

7.625

8.625

4.50

5

5.50

* Larger sizes are available. Special sizes are available upon request.

5

CPW Retrievable Squeeze Packer


+1 918.445.0588

OVERVIEW

Logan’s CPW Retrievable Squeeze Packer is designed to perform all the tasks required of a retrievable stimulation and work over packer and withstand high pressures from above or below. It can be used in all types of squeeze cementing, fracturing, and acidizing with subsequent testing.

The hydraulically actuated hold down slips and mechanical lower slips are carbide tipped for long and dependable service. The CPW’s packing element system is the proven three-section type, but it is heavier and more reliable than packer systems with an integral bypass.

This packer runs with a separate unloader, such as the Locking Compression Unloader, eliminating the possibility of pumping open that can occur with many equalizing valves.


Size * (in) Weight (lbs) Gauge Ring OD (in)

Packer Bore (in)

Connection

4.00 9.5 – 11.6 3.281 1.50 1.900 EU10Rd13.5 – 16.6 3.6409.5 – 13.5 3.77115 – 18 4.125

11.5 – 15 4.25020 – 23 4.50014 – 20 4.641

13 – 15.5 4.78114 – 20 4.641

13 – 15.5 4.7816.625 20 – 24

32 – 3820 – 29 5.96917 – 23 6.21929 – 38 5.69023 – 29 6.00017 – 23 6.18033 – 39 6.453

24 – 29.7 6.67243.5 – 53.5 8.25032.3 – 43.5 8.500

36 - 47 8.438

4.50

1.94 2.375 EU8Rd5.00

5.50

2.38 2.875 EU8Rd

5.7502.50 2.875 EU8Rd

7.00

2.75 3.50 EU8Rd

7.625 2.50 2.875 EU8Rd

9.625 4.00 4.50 EU8Rd

6

Transpack Packer


+1 918.445.0588

OVERVIEW

Logan’s Transpack Cementer is designed to provide a tension set full opening packer for remedial operations such as acidizing, fracturing, squeeze cementing, and casing testing. It can also be run above our WLTC Retrievable Bridge Plug (with a special J-slot).

This packer will remain tightly set and packed off with a high-pressure differential from either the tubing or annulus. It has fully enclosed bi-directional slips and large surface area drag blocks, both of which are fitted with durable tungsten carbide inserts.

The Transpack Cementer is often run above a retrievable bridge plug for remedial work and leak testing. An unloader that closes in tension, such as the Logan Tension Unloader, is run above the packer to provide a means of equalizing tubing and annulus pressure when required. Only a half turn of tubing rotation is necessary to set or release this packer, and if stuck, two emergency release procedures are available.


Packer Bore (in)

Connection

8.6 – 8.7 2.1256.4 – 6.5 2.300

3.50 7.7 – 9.3 2.812 1.25 1.900 EU10Rd13.5 – 16.6 3.6409.5 – 13.5 3.75015 – 18 4.125

11.5 – 15 4.25013 – 15.5 4.78120 – 23 4.50014 – 20 4.641

13 – 15.5 4.500 2.38 2.875 EU8Rd6.625 20 – 24

29 – 3820 – 29 5.96917 – 23 6.19040 – 49 7.34428 – 40 7.56224 – 28 7.735

43.5 – 53.5 8.25032.3 – 43.5 8.500

2.00

1.94

2.375 EU8Rd

5.50

2.875 0.75 1.315 NU10Rd

4.50

5

8.6253.00 3.50 EU8Rd

9.625

5.7502.50 2.875 EU8Rd

7


7

K-10 Packer


+1 918.445.0588

OVERVIEW

The K-10 Packer is a retrievable packer that functions like a permanent drillable packer. It is ideal for many injection, production, and zone isolation functions. Once it is set, it mechanically locks for no movement and will hold pressure from above or below with no requirement for set down weight, tension, or hydraulic hold down to maintain its pack-off. When run with an on/off tool, the tubing string can be disconnected and removed while the packer is left in its set position.

This Logan packer is ideal for isolating bad sections of casing in pump-ing wells, and allows the tubing to be set in neutral so seasonal fluid temperature changes in waterflood wells do not cause problems. Tubing elongation will not affect the pack-off. The tubing also can be in tension, which allows the packer to be used as a tubing anchor/catcher when required.

Since it is a short packer, the K-10 is extremely useful in highly deviated wells and is designed to withstand up to 10,000 psi differential pressure. Its slips and drag blocks are carbide-tipped. The slips are contained inside a slip window to minimize the possibility of hanging up on casing ID abnormalities. The combination of the K-10 Packer’s short length and enclosed slips make this tool an excellent choice for horizontal applications.

Using a standard pressure setting device, the K-10 Packer is also designed to be run and set on wireline.


Packer Bore (in)

Connection

8.6 – 8.7 2.1256.4 – 6.5 2.3009.2 – 10.3 2.7807.7 – 9.3 2.844

4.50 9.5 – 13.5 3.771 1.75 2.375 EU8Rd Box x2.375 NU10Rd Pin

17 – 23 4.50014 – 20 4.641

13 – 15.5 4.78117 – 23 4.50014 – 20 4.641

13 – 15.5 4.78132 – 38 5.62526 – 35 5.84423 – 29 5.96917 – 26 6.078

5.50

2.00 2.375 EU8Rd

2.38

2.875 EU8Rd

7 2.44

2.875 0.69 1.660 EU10Rd

3.50 1.25 1.900 EU10Rd


8

WLTC Retrievable Bridge Plug


+1 918.445.0588

OVERVIEW

Logan’s WLTC Retrievable Bridge Plug is designed to perform all tasks normally required of a tubing run packer-type bridge plug and can be quickly converted to run and set on wireline. The WLTC Plug can be run and set on wireline in a way that allows the tool to be re-set with tubing in a different location before removing it from the well. It is designed to be rugged and compact (the 4-1/2” size is only 63 inches long).

When run on tubing, the WLTC can be set deep or shallow because the packing element system can be energized with compression or tension. This bridge plug will withstand high differential pressures from above or below, while its internal bypass valve is easily opened to equalize fully prior to release.

Activated slips are always on the low-pressure side with the WLTC design to ensure that a tight pack-off is maintained. When run on tubing, a circulation passage through the tool reduces the need for swabbing by allowing fluid to bypass internally. When set, another passage allows effective washing of sand and debris above the elements and ensures easy release and retrieval.

Standard equipment on the WLTC Retrievable Bridge Plug includes tungsten carbide-tipped slips and drag blocks, which are long-lasting and allow for easy setting in the hardest casings. Logan’s Spring-Loaded Overshot is used to run (tubing set) and retrieve (tubing or wireline set) the WLTC Bridge Plug. Sealer ball catcher assemblies are also available for mechanical and wireline settings.

Size (in) Weight (lbs) Gauge Ring OD (in)

8.6 – 8.7 2.1256.4 – 6.5 2.3009.2 – 10.3 2.7817.7 – 9.3 2.844

4.00 9.5 – 11.6 3.28113.5 – 16.6 3.6409.5 – 13.5 3.77115 – 18 4.125

11.5 – 15 4.25017 – 23 4.50014 – 20 4.641

13 – 15.5 4.7816.625 20 – 28 5.615

2.875

3.50

4.50

5.00

5.50


32 – 38 5.75026 – 35 5.84423 – 29 5.96917 – 26 6.07833 – 39 6.453

24 – 29.7 6.67240 – 49 7.34432 – 40 7.56224 – 32 7.735

43.5 – 53.5 8.25036 – 47 8.438

32.3 – 43.5 8.50045.5 – 60.7 9.45032.75 – 45.5 9.688

7.00

7.625

8.625

9.625

10.75

9

Spring-Loaded Overshot


+1 918.445.0588

OVERVIEW

Logan’s Spring-Loaded Overshot is designed to run and retrieve the Logan WLTC Retrievable Bridge Plug.

A force of several hundred pounds (varies with size) is required to install the over-shot onto the bridge plug. After the plug is run to the desired location and set, the tubing string can be released from the plug by holding left-hand torque in the down position and picking up. Cutting teeth are provided on the washover shoe of the overshot to help cut through sand and debris.

Retrieval of the WLTC Retrievable Bridge Plug is accomplished by lowering the tubing string until the overshot contacts the plug. A spring inside the overshot helps prevent inadvertent separation by holding the retrieving lugs on the bridge plug down in the J-slots.

Tubing (in) Casing (in) Max OD (in) Min ID (in) Connection1.25 2.875 2.125 1.25 1.660 EU10Rd1.50 3.50 2.812 1.50 1.900 EU10Rd

4.00 3.250 1.884.50 DP 3.625

4.50 3.7505.50 4.500

6.625 & 7.00 5.5007.625 6.2508.625 7.2509.625 8.25010.75 9.375

3.50 3.00 3.500 EU8Rd

2.375 2.375 EU8Rd2.00

2.875 2.50 2.875 EU8Rd

10

Locking Compression Unloader


+1 918.445.0588

OVERVIEW

Logan’s Locking Compression Unloader provides a means of equalizing differential pressure after completing squeeze cementing or other remedial work below a compression set packer, such as the Logan CPW Retrievable Squeeze Packer.

When the packer is set during squeezing or treating operations, the unloader is automatically locked closed (manual locking available) and cannot be pumped open. The valve may be opened (and manually locked open) at any time to allow circulation above the packer.

Several J-slot configurations, including left-hand or right-hand operation, are available with this unloader. The lock-closed position can be automatic or manual.

Tubing (in) Casing (in) Max OD (in) Min ID (in) Connection

4.00 & larger 3.250 1.50 2.375 EU8Rd Box x2.375 NU10Rd Pin

4.50 & larger 3.750 2.00 2.375 EU8Rd2.875 5.50 & larger 4.500 2.44 2.875 EU8Rd3.500 7.00 & larger 5.250 3.00 3.50 EU8Rd4.500 8.625 & larger 6.750 4.00 4.50 EU8Rd

2.375

11

Tension Unloader


+1 918.445.0588

OVERVIEW

Logan’s Tension Unloader provides a means of equalizing differential pressure after completing squeeze cementing or other remedial work below a packer.

When run above a tension-set squeeze packer, the Tension Unloader will remain open going in or out of the well due to an internal friction device. The tension used to set the packer will also close the unloader and permit pressure work below the packer.

The Tension Unloader can be opened by setting sufficient weight on the packer to overcome the internal friction device. Resistance to closing or opening can easily be adjusted in the field, from a minimum of zero to a maximum of approximately 12,000 lbs.

Tubing (in) Casing (in) Max OD (in) Min ID (in) Connection

1.25 2.875 & larger 2.125 0.75 1.660 NU10Rd x 1.315 NU10Rd

3.50 (12.95 #) & larger 2.594 1.00 1.900 EU10Rd x1.660 EU10Rd

3.50 (9.2 #) & larger 2.812 1.25 1.900 EU10Rd

4.50 (16.6 #) & larger 3.625 2.00 2.375 EU8Rd x2.375 NU10Rd

4.50 (13.5 #) & larger 3.750 2.00 2.375 EU8Rd2.875 5.50 & larger 4.500 2.50 2.875 EU8Rd3.50 6.625 & larger 5.438 3.00 3.50 EU8Rd

1.50

2.375

12

Tubing Swivel


+1 918.445.0588

OVERVIEW

Logan’s circulating Tubing Swivel minimizes friction to ease rotation and reduce the possibility of backing off the top collar.

Logan’s Tubing Swivel allows surface connections to remain in place while the tubing string rotates or moves vertically. In addition to providing a lifting point for the elevators located above a high-capacity thrust bearing, these swivels also permit one or two connections for discharge or flow lines. A single flow connection that runs transverse to the tubing axis is normally provided. Two such transverse connections, or a single in-line connection that allows wireline tools to run through the swivel, are options.

Wireline tools may be run through the Tubing Swivel by substituting the standard handling sub with a hollow handling sub.

Logan’s Tubing Swivels are available in three sizes: standard, heavy duty, and extra heavy duty. The larger sizes are equipped with a box/pin saver sub.

• Allows circulation while the tubing string is rotated or moved vertically• Offers a 1 (2”) LPT Standard Side Port• Available in 6” or 9” longer bottom mandrel for power tongs

Logan’s Tubing Swivels are designed for relatively slow rotational speeds and cannot be used for drilling operations

TypeStatic

Thrust (lbs)

Pressure (psi)

Input Connection

Tubing Size (in)

Elevator Size (in)

Tubing Connection

Standard 90,000 10,000 2 LP2.3752.875

2.3752.875

(3.50 Opt)2.875 EU8Rd

Heavy Duty 230,000 10,000 2 LP 2.8753.50

2.8753.50

3.50 EU8Rd

Extra Heavy Duty 308,000 10,000 2 LP 2.8753.50

2.8753.50

3.50 EU8Rd

13

Mechanical Collar Locator


+1 918.445.0588

OVERVIEW

Logan’s Mechanical Collar Locator provides a means of precisely locating casing collars while running tubing. It can be made up in the tubing string at any point and oriented to indicate collar locations while running in or out of the well.

The body of the Mechanical Collar Locator is constructed of high-strength alloy steel and is of sufficient length to re-cut both box and pin threads several times. The locator blocks are carburized for long wear.

The Logan Mechanical Collar Locator is available in a special sand control version. This option is intended for use in heavy sand environments where there is a possibility of sand getting under the blocks and limiting their compression range, which has been known to damage the Mechanical Collar Locator blocks and hinder the effectiveness of the tool.

Tubing (in) Casing (in)OD(in)

Max Block Expansion

(in)Min ID (in) Connection

3.50 7.7 – 12.95 2.625 3.19 1.50 1.900EU10Rd

13.5 – 16.6 3.648 4.219.5 – 13.5 3.812 4.38

5.00 11.5 – 18 4.125 4.695.50 13 – 23 4.500 5.386.625 20 – 32 5.300 6.427.00 17 – 38 5.710 6.847.625 24 – 47.1 6.210 7.348.625 24 – 49 7.312 8.44

4.501.94 2.375 EU8Rd

2.44 2.875 EU8Rd

14

Pressure BalancedEqualizing Valve


+1 918.445.0588

OVERVIEW

Logan’s Pressure Balanced Equalizing Valve is designed to permit certain packers to run as solid element bridge plugs.

With this equalizing valve attached, a mechanically set locking packer can be left in the well to serve as a bridge plug during remedial operations. The Pressure Balanced Equalizing Valve is then opened prior to retrieval to allow differential pressure to be equalized before the packer is released.

An overshot that is used to run and retrieve the Pressure Balanced Equalizing Valve is available.

*Ask for PPOF or LSOF when ordering

Size (in) Connection (Box x Pin Std)

Overshot OD * (in) Overshot ID (in)

2.375 2.375 EU8Rd 3.75 2.002.875 2.875 EU8Rd 4.50 2.50

15

Downhole Shut-Off Valve


+1 918.445.0588

OVERVIEW

The Logan Downhole Shut-Off Valve offers the capability of holding pressure from above or below. It is opened or closed by rotation of the tubing. With its large bore, the DHSOV allows running P-T boms, perforating guns, etc. Its valve is compatible with Lok-Set‘, “TSN” and Permanent Packers so that tubing can be left in tension, compression, or neutral.

• Provides smooth bore to avoid pressure drops and turbulance• Insensitive to pressure variations in tubing or annulus • Offers resiliant seal for low-pressure, and metal-to-metal seal for high pressure

Tubing (in)Max OD

(in)Min ID

(in) Connection

4.50 and up 3.844 1.80 2.375EU8Rd

5.50 and up 4.500 2.36 2.875EU8Rd

16

CPW Perf Wash Assembly


+1 918.445.0588

OVERVIEW

The Logan Kline Tools PPI-CPW Perf Wash packer system is a compression set tool designed to isolate perforations or zones for washing or acidizing. The size of the zone can be adjusted to the desired length. The PPI-CPW Perf Wash tool sets and releases with ¼ turn. Hydraulic hold down slips, allow for a straight pull to release. The automatic J-Slot allows for the packer to latch back in the run-in position.

FEATURES

• Adjustable Spacing

• Integrated Unloader

• Rugged Carbide Slips

Casing Weight Max.O.D. Seat Diameter Connections

4.50 9.5-13.5 3.776

11.5-15 4.250

15-18 4.125

20-23 4.50

14-20 4.64

13-15.5 4.78

6.63 20-2417-26 6.21923-29 5.97029-38 5.750

24-29.7 6.67229.7-39 6.453

7.63

upper seat I.D.: 1.750 lower seat I.D.: 1.375

2.875 EU8Rd7.00

upper seat I.D.: 1.750 lower seat I.D.: 1.375

2.375 EU8Rd5.00

5.50upper seat I.D.: 1.750 lower seat I.D.: 1.375

2.375 EU8Rd

17

KS1-XW Packer


+1 918.445.0588

OVERVIEW

The Logan Kline Tools KS1-XW Packer is a production packer that is useful for several applications including zone isolation, injection, pumping and production. The packer is designed to hold significant pressure from above or below whether left in compression, tension or neutral. Large internal bypass included to reduce swabbing when running or retrieving. The bypass opens first when releasing to allow the pressure to equalize before releasing the upper slips. The KS1-XW Packer has a rotational shear release feature as well as an optional straight pull adjustable shear release. The standard KS1-XW Packer will withstand differential pressures up to 7,000 psi, and is available in a 10,000 psi version.

Accessories

• KT-2 on-off tool• Stinger with or without profile• Adjustable straight pull shear release kit

Nickle Coating Available

Tubing (in) Casing (in) Max OD (in) Min ID (in) Connection9.5 - 13.5 3.75013.5 - 15.1 3.656

14 - 20 4.62520 - 23 4.50013 - 14 4.81314 - 20 4.62520 - 23 4.50017 - 26 6.09426 - 32 5.87529 - 35 5.81226 - 35 5.84417 - 26 6.00026 - 32 5.87529 - 35 5.812

7.00 3.00 3.500 EU8Rd

4.50 1.942.375 EU8Rd

5.50

2.00

2.38

2.50

2.875 EU8Rd

7.00

18

KS-3 Packer


+1 918.445.0588

OVERVIEW

The Logan Kline Tools KS-3 Packer is a single-grip packer without an upper hold-down device for use in wells that contain negligible differential pressure from below. The tool is set by a quarter-turn to the right at the packer then compression-set with set down weight. The packer is released by straight pick-up and features a large bypass area in order to prevent swabbing of elements during run-in and retrieval.

FEATURES

• Large internal bypass

• Straight pick-up release

• Full bore opening for fluid flow and wireline tool access

Size Weight (lbs) OD (in) ID (in) Connections Part Number4.50 9.5-13.5 3.750 2.000 2.375 EU8Rd 114-4520-XXXX5.50 14-20 4.625 2.000 2.375 EU8Rd 114-5520-XXXX7.00 17-26 6.094 2.411 2.875 EU8Rd 114-7025-XXXX

Casing Tool

19

Anchor Catcher (Lockdown)


+1 918.445.0588

OVERVIEW

The Logan Anchor Catcher (Lockdown) is set and released with only right hand rotation. Quarter turn rotation at the tool is used to set or release. Once set, the tubing string can be landed in tension and vertical movement of the tubing string is eliminated. When normal releasing is not possible, an emergency release requires only a straight pull. This emergency shear release is adjustable.

With the optional no-torque slip installed, right hand rotation of the tubing string is prevented, with the rotation required to release the LDAC unaffected. This allows the anchor to be used with progressive cavity pumps.

FEATURES

• Prevents rotation via optional no-torque slip

• Adjustable emergency shear release

• Stainless steel drag springs

• Carbide or Wickered slips available

* Overall length

5.50” casing is 37.062”7.00 casing is 43.125”

Torque Rating: 3,500 ft lbsShear Release: 5540 lb/screw

New design features for second generation LDAC:

• Severe service springs

• Spring guides

Casing* (in) Weight (lbs) Max OD (in) Min ID (in) Connection4.50 9.5-13.5 3.750 1.94 2.375 EU8Rd

5.50 13-20 4.625 2.38 2.875 EU8Rd

5.50 20-23 4.500 2.32 2.875 EU8Rd

7.00 20-29 5.969 2.382.375, 2.875 and

3.500 EU8Rd

20

Anchor Catcher (Lockdown) HD


+1 918.445.0588

OVERVIEW

The Logan Anchor Catcher (Lockdown) HD showcases the same quality and performance of our LDAC, but with a higher tensile rating on the inner mandrel. This higher tensile rating allows for extended tailpipe options for deepwell applications.

FEATURES

• Offers higher tensile rating on inner mandrel for deepwell applications

• Retains same functionality and bypass area

Casing* (in) Weight (lbs) Max OD (in) Min ID (in) Connection14-20 4.630

20-23 4.5005.50 2.38 2.875 EU8Rd

21

Hydraulic Tandem Packer


+1 918.445.0588

OVERVIEW

The Logan Hydraulic Tandem Packer is designed for isolation of several zones for waterflood and remedial work. One or more may be run above or below a tension or compression set packer.This packer consists of a packing element system, a setting piston that is activated by tubing pressure, and a locking device that maintains pack-off after pressure differential is removed. Adjustable shear screw prevent premature setting.


Packer Bore (in) Connections

3.50 7.7 – 9.3 2.844 1.50 1.900 EU10Rd4.00 9.5 – 11.6 3.281 1.62

13.5 – 16.6 3.6259.5 – 13.5 3.75015 – 18 4.125

11.5 – 15 4.25017 – 23 4.50014 – 20 4.62517 – 23 4.50014 – 20 4.641

6.625 20 – 2432 – 3823 – 29 5.96917 – 26 6.078

5.50

2.50 2.875 EU8Rd5.750

7.00

2.375 EU8Rd

4.50

1.945.00

5.50


22

Big Bore Tubing Packer


+1 918.445.0588

OVERVIEW

The Logan Big Bore Tubing Packer is designed to provide a leak-free seal inside a tubing string with a bore larger than other tubing packers. It can run as a tension packer or a “hook wall” compression packer. It has left-hand safety threads at each end in case it becomes stuck.

Options include a double element packing system along with box or pin connections at either end. Various tubing connections are available. This Logan Kline Tools Big Bore Tubing Packer can also be used as a tension anchor by replacing the packing element with a steel sleeve.

Size (in) Weight (lbs) Gauge Ring OD (in) Packer Bore (in) Connections2.875 6.4 – 6.5 2.281 1.50 1.900 NU10Rd3.500 7.7 – 9.3 2.812 1.75 1.900 EU10Rd

23

Scab Liner Assembly


+1 918.445.0588

OVERVIEW

Logan’s Scab Liner Assembly is an economical method of isolating casing leaks or existing perforations in producing and injection wells. It can eliminate repetitive squeezing and the need to install a full liner. This assembly is fully retrievable and incorporates a unique design with large bore sizes that enable standard tubing to run through the liner.

Producing Wells For casing leaks in producing wells, a tubing anchor/catcher can be installed below and gas can be produced through the annulus past the isolated zone to the surface, thus preventing locking of the rod pump. The Scab Liner Assembly is available from 3-1/2” to 9-5/8”.

Injection Wells Casing leaks can be isolated in injection wells by using a seal bore packer or a retrievable injection packer with an on/off tool, then installing the Scab Liner Assembly above to isolate the leak. The tubing string can run through the assembly and is stung into the seal bore packer or latched onto the injection packer.


Size (in) Weight (lbs) Max OD (in) Min ID (in) Run-In Sub ID (in) Max Liner Weight (lbs)

3.50 7.7 – 9.2 2.81 1.91 1.62 36,0004.50 9.5 – 13.5 3.75 2.50 1.75 96,0005.50 13 – 17 4.64 3.38 2.00 88,0007.00 17 – 29 5.97 4.50 2.38/2.50 105,0007.625 24 – 39 6.47 5.00 3.00 98,0008.625 28 – 40 7.62 6.00 3.00 141,000

28 – 40 8.44 6.50 3.00 154,00043 – 53 8.31 6.50 3.00 154,000

9.625

24

Tubing Anchor/Catcher


+1 918.445.0588

OVERVIEW

The Logan Tubing Anchor/Catcher is a time tested design that has proven to be rugged and reliable. It can anchor tubing in either tension or compression. The Tubing Anchor/Catcher is fully retrievable or resettable and includes a safety shear release feature that can be adjusted quickly in the field. The Tubing Anchor/Catcher employs drag blocks rather than drag springs for maximum drag reliability. The Tubing Anchor/Catcher requires left hand rotation to set the tool. It is released with right hand rotation.

Size (in) Weight (lbs) Gauge Ring OD (in) Anchor Bore (in) Connection2.875 6.4 – 6.5 2.250 1.00 1.900 NU10Rd3.50 7.7 – 9.3 2.812 1.62 1.900 EU10Rd

4 9.5 – 11.6 3.28115.1 – 16.6 3.5009.5 – 11.6 3.844

5 11.5 – 18 4.125

1.94 2.375 EU8Rd4.50

2.38 2.875 EU8Rd

25

Dual-String Anchor


+1 918.445.0588

OVERVIEW

Logan’s Dual-String Anchor provides a means of anchoring the second or short tubing string in a dual completion. It consists of two parts:

An anchor body with long-string connection threads on one side, top and bottom and a short-string receptacle with J-lugs on the opposite side, and a short-string latch with J-slots on the bottom and short-string connection threads on the top.

The anchor is run above a production packer. After the packer is set, the second string is run with the short string latch at the bottom. When the anchor is contacted, the latch will automatically locate and latch in the hole with J-lugs. The short string can then be landed in tension, compression, or neutral, as appropriate.

To release the short string, set weight, then raise it while rotating to the right.

Size (in) Weight (lbs) Anchor OD (in) Short String Latch Thread

Long String Connection

4.50 9.5 – 11.6 3.812 1.900 NU10Rd 1.315 NU10Rd5.50 13 – 23 4.500 1.900 EU10Rd 1.900 EU10Rd

7 17 – 29 5.970 2.375 EU8Rd 2.375 EU8Rd

26

Downhole Swivel Joint


+1 918.445.0588

OVERVIEW

The Logan Downhole Swivel Joint allows rotation of the tubing string even when the section below is stuck. Thrust bearings are incorporated in the joint to reduce friction when the tubing is in tension or compression during rotation.

The Downhole Swivel Joint is often used below a Logan’s Tubing Anchor/Catcher when the tailpipe will be in mud to facilitate rotation required to set the anchor. It is available for 1.900”, 2-3/8”, and 2-7/8” tubing.

Size (in) Max OD (in) Min OD (in) Connection1.900 3.250 1.50 1.900 EU10Rd2.375 3.750 2.00 2.375 EU8Rd2.875 4.500 2.50 2.875 EU8Rd

27

Hydraulic Tubing Drain


+1 918.445.0588

OVERVIEW

Logan’s Hydraulic Tubing Drain is designed to provide a means of equalizing pressures between the tubing and annulus by simply over-pressurizing the tubing string to a pre-set point. When the pre-set point is reached, a set of shear pins will break and the external sleeve will move down to uncover the ports in the inside nipple. The pressure differential that causes the shear pins to break is adjustable by adding or subtracting shear screws from the sleeve. The drain is available in most common tubing sizes. Opening pressure is generally adjustable between 1,500 and 3,500 psi.

Size (in) Max OD (in) Min ID (in) Connection2.375 3.500 2.00 2.375 EU8Rd2.875 3.750 2.45 2.875 EU8Rd3.500 4.500 3.00 3.500 EU8Rd

28

K-Frac Hydraulically-Actucated Starter Valve


+1 918.445.0588

OVERVIEW

The Logan Hydraulically Actuated Starter Valve (HASV) is strategically placed at the toe or first frac zone port when used in the ball actuated frac valve system. The HASV is also utilized in plug and perf operations to open the toe of the liner to pump plugs and guns to depth.

Full Bore Inside Diameter External shifting components eliminate any ID reduction and any drill out requirements to gain lower access of the liner.

Adjustable Actuation Pressure The hydraulic opening pressure can be adjusted prior to installation.

Locked Open Once actuated, the valve is permanently locked open.

Design and Manufacturing Standards The HASV is designed with performance specifications equal to that of the liner casing.

Size (in)

Connection Max OD (in)

Tensile (lbs)

Burst (psi)

Collapse (psi)

Activation Pressure (psi)

4.50 4.500 8RL 5.50 269,000 5,000 5,000 2,850 – 3,150

29

K-FracFracturingStimulation Valve


+1 918.445.0588

OVERVIEW

The Logan K-Frac Fracturing Stimulation Valve is strategically placed in the fracturing liner and is opened by pumping a predetermined size ball on a seat for zonal stimulation and isolation.

Full Bore Inside Diameter Once the balls and ball seats have been removed, a full bore ID remains that enables full gauge access into the liner to enable remedial or re-stimulation applications with conventional tools.

Seat Design The seat design has been designed to allow more stages per size. The seat is made from a reengineered drillable material that has improved erosion and drillable characteristics.

Selective Re-fracturing With the balls and ball seats removed and the full ID regained, the Logan Kline Tools’ Straddle Packer Frac Tool can be run on either coiled tubing or threaded pipe to perform selective fracture treatments.

Design and Manufacturing Standards The K-Frac Fracturing Stimulation Valve is designed with performance specifica-tions exceeding that of the liner casing.

Size (in) Weight (lbs) No. of Stages

Tensile (lbs) Burst (psi) Collapse (psi)

4.50 11.60 30 278,000 10,690 7,5804.50 13.50 30 337,000 12,410 10,690

30

K-Frac Running Tool


+1 918.445.0588

OVERVIEW

The K-Frac Running Tool (KFRT) is the uppermost component of the K-Frac Fracturing Liner System. The KFRT functions as an installation and disconnect device during the liner run-in and functions as a re-entry device throughout the well life.

Simple Design The KFRT is composed of two robust components: the KFRT seal assembly and the KFRT receptacle. The retrievable-reusable KFRT seal assembly features external high load rated lugs and high performance V-seal assembly for elevated bottom hole temperatures and multiple fluids compatibility.The KFRT receptacle is a one-piece design to facilitate high torque, tensile, and pressure ratings. The KFRT receptacle incorporates a stab-in guide, internal J-slot, and polished seal bore.

Simple Operation The KFRT is designed for ease of downhole operation. Once the liner has been installed, open hole packers and liner hanger packer have been set and tested, simply apply compression to the run-in string, apply 1/4 right-hand turn and pick up to disconnect.

A tie-back fracturing string can be reconnected with straight stab-in KFRT receptacle with the KFRT seal assembly.

Full Bore Inside Diameter The minimum ID through the KFRT is equal to the minimum liner ID.

Design and Manufacturing Standards The K-Frac Running Tool is designed with performance specifications equal to that of the liner casing.

Size (in) Connection Max OD Tensile (lbs) Pressure (psi)4.50 4.500 8RL 6.00 125,000 10,000

31

K-Frac Flow Lock Collar


+1 918.445.0588

OVERVIEW

Logan’s K-Frac Flow Lock Collar is the lowermost component above the liner shoe track. The K-Frac Flow Lock Collar allows well fluid to fill up during liner installation; circulation for well fluid displacement once the liner is at depth and closed, provides liner pressure integrity for setting of the K-Pak Open Hole Packers, the liner hanger packer, and opening of the K-Frac Hydraulic Actuated Starter Valve.

Ball Actuated The K-Frac Flow Lock Collar remains open for circulation until the corresponding ball is circulated to the collar.

Adjustable Actuation Pressure The hydraulic closing pressure can be adjusted prior to installation.

Locking Shut-off Once the K-Frac Flow Lock Collar has been shifted closed it remains permanently locked.

Design and Manufacturing Standards The K-Frac Flow Lock Collar is designed with performance specifications equal to that of the liner casing.

Size (in)

Connection Max OD (in)

Tensile (lbs)

Burst (psi)

Collapse (psi)

Activation Pressure (psi)

4.50 4.500 8RL 5.00 123,100 10,690 7,580 900 – 1,000

32

K-Frac Open Hole Packer


+1 918.445.0588

OVERVIEW

The K-Frac Open Hole Packer is used to straddle the K-Frac Fracture Stimulation Valve for fracture zonal isolation, additionally any number of packers may be installed for any open hole isolation application.

Performance Dual Element Design The K-Frac Open Hole Packer increases open isolation performance with a recessed dual packing element design. The recessed packing element run in diameter reduces potential damage during installation. The dual element system creates a dual barrier in the open hole to ensure zonal isolation.

Hydraulic Setting Hydraulic setting enables well fluid circulation and well displacement without risk of premature packer setting.

Selective Setting The complete liner isolation string of packers can all be set with a single pressure cycle or can be set at staged pressure cycles if desired.

Design and Manufacturing Standards The K-Frac Open Hole Packer is designed with performance specifications equal to that of the liner casing

Size (in) Connection Max OD (in) Tensile (lbs) Burst (psi)Collapse

(psi)4.50 4.500 8RL 5.80 250,000 9,000 5,7504.50 4.500 8RL 5.90 250,000 10,700 5,750

33

K-Frac Open Hole Anchor


+1 918.445.0588

OVERVIEW

The Logan K-Frac Open Hole Anchor is hydraulically set. Tubing pressure is used to set the anchor and the setting force is locked into the Anchor by a ratcheting system. The element is recessed to reduce open hole friction and wearing of the element in preset conditions. The slips create an anchor into the open hole rock face to help ensure the integrity of the liner. The K-Frac Open Hole Anchor is designed for selective setting pressures. Multiple K-Frac Open Hole Anchors can be run in tandem for zone isolation.

Special Features

• Increased zone isolation• Reduces hole friction with recessed elements• Offers selective setting procedures• Run without packing element when zonal isolation is not required

Hydraulic SettingHydraulic setting enables well fluid circulation and well displacement without risk of premature setting.

Design and Manufacturing StandardsThe K-Frac Open Hole Anchor is designed with performance specifications equal to that of the liner casing.

Size (in) Connection Max OD (in) Tensile (lbs) Burst (psi) Collapse (psi)

4.50 4.500 8RL 5.80 250,000 9,000 5,7504.50 4.500 8RL 5.90 250,000 10,700 5,750

34

K-Frac 6.080”Open Hole Reamer


+1 918.445.0588

OVERVIEW

The K-Frac 6.080” Open Hole Reamer is an essential component to the successful installation of the K-Frac Isolation System. The 6.080” Open Hole Reamer is run immediately prior to the liner installation to ensure clean installation of the liner. The 6.080” Open Hole Reamer effectively builds a smooth transition in the wellbore by evening out dog legs and tight spots.

Helix DesignThe 6.080” Open Hole Reamer features two sets of three-bladed left-hand helixes. The first helix has a 120° offset and the second has a 180° degree offset.

Extended-Life Cutting SurfaceThe two-inch-wide helix blades are dressed with tungsten carbide shard matrix. This matrix continually exposes new carbide shards as the blades wear to maintain an effective cutting surface.

35

K-Frac Bi-DirectionalHydraulic Shifting Tool


+1 918.445.0588

OVERVIEW

The K-Frac Bi-Directional Hydraulic Shifting Tool is able to open or close any number of valves in a single trip. It works with threaded or coiled tubing and is compatible with or without jars or bumper subs. The tool is easy to locate with Logan Kline Tools’ Mechanical Collar Locator.

Shifts Valves Open or ClosedThe K-Frac Bi-Directional Shifting Tool is used to shift the internal piston sleeve of the K-Frac Retriev-a-Seat (RAS) Valve to either the open or close position. Individual or multiple valves can be repeatedly opened or closed in a single trip. The K-Frac Bi-Directional Shifting Tool works with threaded or coiled tubing. When used in conjunction with the Logan Kline Tools’ Mechanical Collar Locator, the need for complicated spaceout calculations is eliminated.

Flow Actuated The K-Frac Bi-Directional Shifting Tool is a flow-actuated tool that can be cycled repeatedly downhole without affecting the reservoir characteristics and with activation pressures less than the frac gradient.

Self DrainingThe K-Frac Bi-Directional Shifting Tool is designed to fail safe with the slips in the retracted position. However, should there be the need, there is a secondary release mechanism To activate the secondary release mechanism, a ball is pumped down to an internal seat, pressure is applied to the string bursting a rupture disk. This will release any internal pressure that could be trapped in the tool and retract the slip mechanism.

Design and Manufacturing Standards The K-Frac Bi-Directional Hydraulic Shifting Tool and K-Frac Fracturing Isolation System components are designed and manufactured to API Q1 standards at our certified manufacturing facility.

36

K-Frac Liner Hanger Packer


+1 918.445.0588

OVERVIEW

The K-Frac Liner Hanger Packer is a hydraulically set tool, with no need for external setting tools.

Pressure enters the setting chamber via holes in the internal mandrel of the packer. When the frac liner is spaced out in the proper location of the well, a ball is dropped to start the setting activation process. The ball lands in the Flow Lock Sub and seals off communication from tubing to annulus. Pressure is increased until the initial setting process starts (1,376 psi). The packer is completely set with 3,500 psi.

Packer Size

(in/mm)

Weight (lbs/ft - kg/m)

Recommended Hole Size (in/

mm)

Tool OD (in/mm)

Seal Bore (in/mm)

Setting Area (in²/cm²)

Setting Initiation (psi/mpa)

Min Setting

Pressure (psi/mpa)

Max Setting Pressure (psi/mpa)

4.0 X 7.0 23 - 32 6.094 - 6.366 5.875 4.00 5.809 1.375 3,500 4,500

37

+1 918.445.0588 loganinternationalinc.com

2016 Kline Catalog

Documents

Transcript of 2016 Kline Catalog