THE QUILT SHOWN IS A DIGITAL REPRESENTATION. ACTUAL FABRIC REPEATS WILL VARY FROM DESIGN SHOWN.

© 2

016

Hei

di P

ride

mor

e fo

r B

enar

tex,

LLC

You’ll have to see this quilt to believe it - each fabric beautifully glows with pearlized accents. The effect is magical! A sophisticated addition

to any room.

Uses Kanvas’s Nature’s Pearl collection Finished Size: 74” x 92”

BENARTEX, LLC • 132 WEST 36TH STREET, 4TH FLOOR • NEW YORK, NY 10018 • T:212-840-3250 • WWW.BENARTEX.COM

SAMPLE KEY/SKU QTY CUT CUT PIECES VIA WOF

A

C

E

G

B

D

F

H

Beaded Circles8464P-11Gray

Floating Dandelion8462P-70Puddy Taupe

Shadow Leaf8463P-11Taupe/Gray

Sand Dunes 8458P-13 Silver

Dandelion Dots 8460P-12Black/Pearl

Dandelion Shadow8461P-07Ecru

Dandelion Fields8459P-12 Black

Beaded Circle8464P-12 Charcoal

BLOCK ASSEMBLY PROJECT USES PRECISE 1/4” SEAMS. TEST YOUR SEAM ALLOWANCE BY CUTTING (2) 2-1/2” X 5” RECTANGLES. STITCH THEM TOGETHER ALONG THE 5” LENGTH. AT THE MIDPOINT, MEASURE ACROSS THE UNIT. IT SHOULD BE EXACTLY 4-1/2” WIDE. IF NOT, ADJUST YOUR SEAM ALLOWANCE AND REPEAT.

SASHING ASSEMBLY MEASURE WIDTH AND LENGTH OF THE QUILT TOP TO ENSURE SASHING SIZES, BELOW ARE OUR CUTTING SIZES.

(7) 8-1/2 x WOF strips, sub-cut (20) 8-1/2” x 12-1/2” strips.

(5) 4-1/2” x WOF strips, sub-cut (20) 4-1/2” x 8-1/2” strips.

(3) 4-1/2” x WOF strips, sub-cut (20) 4-1/2” squares.

(12) 2-1/2” x WOF strips.*(13) 2-1/2” x WOF strips, sub-cut (25) 2-1/2” x 16-1/2” strips.

(5) 8-1/2” x WOF strips, sub-cut (20) 8-1/2” squares.

(5) 4-1/2” x WOF strips, sub-cut (20) 4-1/2” x 8-1/2” strips.

(3) 4-1/2” x WOF strips, sub-cut (20) 4-1/2” squares.

(9) 2-1/2” x WOF strips, BINDING.

* SEW STRIPS VIA SHORT ENDS THEN GO TO BORDER ASSEMBLY WOF/LOF=WIDTH/LENGTH OF FABRIC

Quilt Diagram

Note: If this Benartex pattern is included in a kit, any questions about the kit should be addressed to the vendor from whom you bought it.

1-1/3 yds

3/4 yd

1/2 yd

3/4 yd

1-3/4 yds

3/4 yd

1/2 yd

2 yds

FINISHED SIZE: 74” X 92”

FINISHING Cut batting and backing 3” larger than top on all sides. Layer backing, batting and top together and baste or pin. When quilting is completed, trim excess batting and backing. Bind as usual.

G

G G G G G

G G G G G

G G G G G

G G G G G

G G G G G

G

G

G

G

G

FC

E

make 20

A FC

E

BD

make 20

Blocks1. Sew (1) C 4-1/2” x 8-1/2” strip, (1) E 4-1/2” square and (1) F 4-1/2” square together to make (1) CEF unit.

2. Sew (1) B 8-1/2” square to the bottom of (1) CEF unit to make (1) CEF/B unit.

3. Sew (1) D 4-1/2” x 8-1/2” strip to the bottom of (1) A 8-1/2” x 12-1/2” strip. Sew this strip to the left side of the CEF/B unit to make (1) Block.

4. Repeat Steps 1-3 to make (20) Blocks total.

Quilt Assembly5. Sew (5) G 2-1/2” x 16-1/2” strips and (4) Blocks together, alternating them, to make (1) row. Pay attention to the orientation of the Blocks. Repeat to make (4) rows total.

6. Sew (6) G 2-1/2” x (74-1/2”) strips and the (5) rows together, alternating them, to make the quilt top.