2016 CATALOG - The Mako Group

2 0 1 6 C A T A L O G

Dear Shooting Enthusiast,

2015 was a very good year for The Mako Group and 2016 is shaping up to be even better. In this catalog you will find the finest tactical

weapon accessories and equipment in the world; tried and proven in battle by the Israeli Defense Forces as well as used by the U.S. Armed

Forces and federal agencies from Meprolight, FAB Defense, Front Line Holsters, E-Lander Magazines and RTS Target Systems. Military,

law enforcement and serious shooters will find these products the solution to their shooting needs. Innovative designs coupled with quality

manufacturing equals superior performance.

E-LANDER MAGAZINES E-LANDER MAGS

TABLE OF CONTENTSMeprolight Optics and Magnifiers ................. page 4

Meprolight Night Sights .............................. page 9

FAB Buttstocks ....................................... page 13

FAB Buttstocks Accessories ...................... page 25

FAB Rail Systems and Handguards ............. page 26

FAB Pistol Grips for Rifles & Carbines ......... page 32

FAB Foregrips ......................................... page 34

FAB Bipods & Mounts .............................. page 38

FAB Lights & Light Mounts ........................ page 40

FAB Optic Mounts .................................... page 41

FAB Bayonet Lug Mounts .......................... page 42

FAB Pistol PDW Conversions & Accessories ... page 44

FAB Ultimag Magazines and Accessories .... page 46

FAB Slings & Mounts ............................... page 50

FAB Safety Training & Self-Defense .............. page 52

FAB Handgun Accessories ........................ page 55

FAB Scorpus Holsters .............................. page 58

RTS Targets and Accessories ..................... page 60

E-Lander Magazines and Accessories ......... page 65

Front Line Holsters and Pouches ................ page 69

A I M F O R G R E A T N E S S

A I M F O R G R E A T N E S S

THEMAKOGROUP.COM | 631-843-0490 | MEPROLIGHT4

OPTICS & NIGHT SIGHTSMEPROLIGHT COMBAT OPTICSMeprolight was the first to build a reflex sight for CQB combat. Meprolight’s current sights reflect years of refinement and the integration of the latest technology. The optics are continually improved as new technology and techniques become available. A world leader in reflex sight technology, Meprolight’s sights are used by combat units in countries around the world.

CHOOSING OPTICSNext to the weapon itself, the sighting system is the most important part of the weapon system. The effectiveness of the shooter centers around his ability to quickly and effectively place bullets in the target. A quality optic is required. Here are some considerations:

DURABILITYA broken sight means an ineffective weapon. Choose a MIL-SPEC sight with a proven combat record.

SIMPLICITYComplicated equipment is a detriment in a fight. Optics should not be complicated and the controls should be simple.

BATTERY LIFEBattery life should be substantial and the optic should use readily available batteries. Most Meprolight optics are illuminated at all times, requiring no batteries.

CO-WITNESSWe recommend a lower third co-witness, in which the iron sights are visible through the lower part of the optic.

With its MIL-STD design, the battle proven MEPRO RDS PRO is an outstanding all-purpose reflex sight that performs under the harshest conditions!

The MEPRO RDS PRO is an energy-efficient, compact sight that provides thousands of operating hours while utilizing a single “AA” battery. With battle-proven LED technology and a rugged MIL-STD design, performs under the harshest conditions. A large display window and clearly defined red-dot ensures rapid target acquisition with both eyes open and four easily switchable reticle brightness intensities and fits every tactical scenario. For night operations and long-range target engagement the RDS PRO is compatible with GEN II and GEN III NVGs as well as magnifying scopes.

The TRU-DOT RDS developed in Israel as the ultimate all-purpose reflex sight; the TRU-DOT RDS is now available in the U.S. at an unbeatable price!

Compact, energy efficient design, the TRU-DOT RDS provides thousands of operating hours with a single AA battery. With its large display window and clearly defined red dot the TRU-DOT RDS ensures rapid target acquisition with both eyes open. The sight features battle proven LED technology and four easily switchable brightness intensities for every tactical scenario.

The TRU-DOT RDS is compatible with Gen II and Gen III NVGs as well as with magnifying scopes to facilitate night vision operations and long-range target engagement.

TRU-DOT® RDS

Features:• NVG compatible• Durable and lightweight• LED technology for low power consumption• Auto shut-off mechanism for additional energy

savings• Four distinct reticle brightness levels for

different tactical scenarios• Compatible with magnifying scopes• Large display window• Integral Picatinny rail adapter• Low-battery indicator• Minimal maintenance

FEATURES• Durable and lightweight• LED Technology for low power consumption• Auto shut-off mechanism for additional energy savings• Four distinct reticle brightness levels for different tactical scenarios• Compatible with NVGs and magnifying scopes• Large display window• Integral Picatinny rail adapter• Low-battery indicator• Minimal maintenance• MIL-STD qualified

MEPRO TRU-DOT® RDS Red Dot Sight with 1.8 MOA Red Dot

NEW!Optic Sights

NEW!

RDS PRO

THEMAKOGROUP.COM | 631-843-0490 | MEPROLIGHT 5

The M21 Reflex sight provides constant, all-light aiming capability, without batteries. Designed through close collaboration with Israeli Special Forces, the M21 was the first reflex sight in the world designed for close quarter combat. It is battle proven, reflexive to use, deadly accurate and totally reliable. The M21’s large 30mm diameter lens allows rapid target acquisition with both eyes open. Reticle illumination is achieved by a protected fiber optic light collector system during the day and by a self-powered tritium light source at night. Transition between the two systems is instantaneous and automatic to assure good contrast between the aiming dot and the target area. The M21 is night vision compatible. This sight gives shooters the ability to acquire targets accurately at any range, in any situation. It is compatible with magnifiers.

The M21 has long been the standard issue optic for the IDF.

Mepro M21 Mepro 4xSelf-Powered Day/Night Reflex Sight with Dust Cover

Day Scope with 4x Magnifier

• Always ready for action – no batteries or switches• Reflexive aiming with both eyes open and focused on the target• Self-illumination adjusts to ambient light• Reticle designed to be visible under all conditions• Operates under all weather and temperature conditions• Large 30mm diameter lens with state-of-the-art coatings assures large FOV• Armored design for hard combat use• Sight is black and grey, no white or bright colored fiber optic tubes exposed• Increases accuracy and speed when firing under pressure• Quick-release Picatinny mount retains zero when remounted• Tritium Illumination is warranted for 10 years

M21 B Self-Powered Day/Night Reflex Sight with Dust Cover – Bullseye

M21 T Self-Powered Day/Night Reflex Sight with Dust Cover – Triangle

M21 D4 Self-Powered Day/Night Reflex Sight with Dust Cover – 4.3 MOA Dot

M21 D5 Self-Powered Day/Night Reflex Sight with Dust Cover – 5.5 MOA Dot

M21 X Self-Powered Day/Night Reflex Sight with Dust Cover – X-Reticle

The M21 is the optic of choice for the Israeli Defense Force.

No batteries, no electronics, no delicate internal moving parts!

TriangleBullseye Dot(4.3 or

5.5 MOA)

X-Reticle

ACCESSORY

21PR M21 Picatinny Rail AdaptorPurpose: Converts the carry handle mount to a rail mount

The new MEPRO 4X is a fixed 4x magnification, compact and lightweight telescopic day sight. Utilizing a quick release Picatinny adaptor, this MIL-STD sight provides different brightness settings for efficient target acquisition in any tactical situation. Energy efficient, the sight operates on a single battery and features auto-shutdown after one hour. The MEPRO 4X is an extremely robust and easy-to-use tool, ideal for modern combat operation.

Advantages

• Operates on a single battery

• Auto shut-off after one hour

• Compact and lightweight

• Numerous optional reticle

• Numerous brightness levels for different tactical scenarios

• Utilizing a quick release Picatinny adaptor

• Fully adapted for MEPRO XT4 clip-on


MEP

ROLI

GHT

OPTI

CS &

NIG

HT S

IGHT

S

The only all-in-one electro-optical sight available today! Two integrated lasers (5mW visible laser and an IR laser). Combining two laser sights into a single lightweight and rugged integrated sight eliminates the need to purchase separate laser and IR designators and frees rail space.

Three integrated reticle illumination systems (fiber optic collector system during the day, self-powered tritium light source at night and a 3-position LED enhancer for difficult ambient light conditions). This ensures you NEVER lose your reticle! Unlike other sights that lose their reticles when the batteries are low or dead, the Mepro MOR continues to operate!

A unique single boresight mechanism allows you to zero all aiming devices simultaneously (the sight reticle and the laser pointers), saving time and ammunition. The M21 has long been the standard issue optic for the IDF.

Mepro MORTri-Powered Reflex Sight with Visible and IR Laser Designators

Mepro MOR Multi-Purpose Tri-Powered Reflex Sight with Visible Laser Designators (dot reticle)

Mepro MOR M&P Multi-Purpose Tri-Powered Reflex Sight with Visible and IR Laser Designators (dot reticle)

Mepro MOR B MOR with Bullseye Reticle

Mepro MOR M&P B MOR M&P with Bullseye Reticle

The Mepro MOR was designed and built for the Israeli Special Forces. It was named American Riflemen’s 2015 Optic of the year.

Other features include: Totally integrated day/night sight provides instant all light aiming. Transition between the daytime fiber optic system and the nighttime tritium light source is automatic. The light collection system is supplemented by a unique adjustable-brightness LED enhancer to boost the reticle if needed.

30mm diameter lens, designed to meet the highest standards of Israel’s Special Forces, assures rapid target acquisition with one or both eyes open. Perfect sight for both close quarter and long range engagements.

The MEPRO MOR is available in the United States in two configurations, each with either a dot or bullseye reticle:

Mepro MOR M&P (Military and Police version): This sight includes two integrated laser sights (Visible and IR).

Mepro MOR (Commercial version): Includes an integrated visible laser sight.

The MEPRO MOR, a battle-proven sight used by Armed Forces around the world, is manufactured to the highest military standards. When quality and reliability are required, make sure it is Meprolight from The Mako Group!

• Passive reflex – always illuminated and ready for action• Active reflex – extra bright battery-powered dot for special conditions• Red laser designator for daylight urban or close quarters operations• IR laser designator – for low light and covert operations• All-in-one-design lowers costs and bulk• Flawless operation in extreme temperature and weather conditions• 30mm lens provides a large FOV for rapid target acquisition• Weighs only 15.8 oz

10 year warranty on illumination. See website or product packaging for complete warranty information.

Bullseye

Dot(4.3 MOA)


Mepro MX3/MX3 TAVORReflex Sight Magnifier

Mepro MX3 Reflex Sight Magnifier

Mepro MX3 TAVOR Magnifier for IDF Tavor

GLS

The Need: Grenade launchers have been in service with armies around the world for decades. However, experience has shown that even after extensive training, achieving reasonable accuracy with the leaf sight supplied with the weapon is a far shot. Soldiers need a reliable sight in order to determine the elevation to the target and to maximize first round hit probability.

The Solution: Meprolight solved the aiming limitation by developing the first optical reflex sight for 40mm grenade launchers. The MEPRO GLS sight functions under all lighting and weather conditions, and offers soldiers the ability to accurately aim and hit targets with both eyes open.

The dual self-illuminated optical sight is a technological breakthrough. The compact unit mounts onto the Picatinny top rail – on its own or behind the MEPRO M21 Reflex Sight – and can also be mounted onto a side adapter (9 o’clock). It is adjustable for both windage and elevation. During the day, a light collector tube concentrates available ambient light into a dot and projects it onto the sight lens. At night, a small tritium light source supplies the light for the dot.

Mepro GLS/GLS MSelf-Illuminated Optical Sight for 40mm Grenade Launcher

Dual Wavelength Laser Pointer

Mepro GLS Self-Illuminated Optical Sight for 40mm Grenade Launcher (Inline Mount)

Mepro GLS M Self-Illuminated Optical Sight for 40mm grenade launcher (offset side mount)

Israeli Special

Forces

The Mepro MX3 provides a decisive operational solution for any soldier in the field, as well as for designated marksmen. Its 3x magnification enhances the precision and effectiveness of reflex sights such as the Mepro 21 and the Mepro MOR.

Manufactured to the highest military standards to assure years of reliable operation under all field conditions, the MX3 extends effective ranges with no need to re-zero sights.

The MX3 attaches to a standard MIL-STD-1913 Picatinny rail or to a dedicated Tavor mount behind a reflex sight with a quick release mount. Compact, lightweight and rugged. Does not require zeroing. Wide field of view. MIL-STD-810 qualified.

STING

The MEPRO STING is a state-of-the-art dual wavelength laser pointer designed to support various tactical scenarios including close quarters battle (CQB) and covert night operations. The pointer emits a visible or IR laser beam, projecting an aiming dot on the target.

The MEPRO STING provides shooting capabilities without the need to look through the rifle’s sight: enabling rapid and instinctive target engagement. Switching between visible and IR modes is easily controlled by the shooter. The MEPRO STING is uniquely equipped with Picatinny adaptor, which can be easily used on right or left side of the weapon, per user’s need. Designed and fabricated to the highest military standards to assure years of reliable operation under all field conditions.

Features:

• Dual wavelength laser pointer

• Single zeroing process for both lasers

• High and low power options for each of the lasers

• Momentary and constant lasing modes

• Safety catch for visible laser - prevents accidental exposure to hostile forces

• LED indicator with individual color coding for visible and IR laser types

• Can be operated with or without remote control cable

Laser Designator

NEW!


MEP

ROLI

GHT

OPTI

CS &

NIG

HT S

IGHT

SMEPROLIGHT HANDGUN NIGHT SIGHTSNEW FROM MEPROLIGHT

MEPROLIGHT SELF-ILLUMINATED NIGHT SIGHTSSelf-illuminated pistol night sights were a Meprolight innovation. Since developing the first tritium-illuminated pistol night sights, Meprolight has remained the leader in night sight technology.

BRIGHTEST NIGHT SIGHTSMeprolight Night Sights are the brightest in the world. Their proprietary process of handling and installing tritium light sources results in the purest and brightest tritium-powered night sights. Meprolight’s precision night sight lenses are installed perfectly aligned and the ideal distance from the tritium tubes. Their self-illuminating sights are 20% brighter than the nearest competitor’s sights.

DURABILITYMeprolight’s methods of handling the tritium light sources result in the lowest failure rate. Meprolight uses a unique combination of adhesives that resists damage from heat and solvents. Exposure to gun oil will not cause Meprolight tritium tubes to fall out of the sights.

FITTINGDifferent manufacturers use different dovetails and sometimes change dovetails. Please see our website for the latest fitting information. If you have a pistol that is not listed, a good place to start is by contacting the manufacturer and asking what dovetail they use. Many manufacturers use dovetails that match those used by larger manufacturers in order to source sights more easily.

Please be sure that you are familiar with install methods, or have the installation performed by a competent gunsmith.

ML40275 O Rear sight, Orange

ML40275 G Rear sight, Green

ML4035O O Rear sight, Orange

ML40350 G Rear sight, Green

Glock

Springfield

FRBS 4D - Front and Rear Set of Flip-up Sights with Tritium - 4 Rear Dots

FRBS 2D - Front and Rear Set of Flip-up Sights with Tritium - 2 Rear Dots

FRBS - Self Illuminated Backup Sights

R4E Optimized Duty Sight FT - Fiber Tritium Sights

The FRBS are tritium-enhanced front and rear back-up sights designed to provide the shooter secondary sights in case the primary optics go down.

FRBS sights are advanced, low-profile, durable, tritium-enhanced auxiliary front and rear back-up sights. The sights quickly fold up or down depending on the shooters needs. Sight pin elevation is easily and quickly adjusted without tools. FRBS sights are readily mounted on any 1913 Picatinny rail. Day or night, the tritium makes the FRBS a viable option.

Rapid target acquisition is a critical component of defensive shooting. Designed by two highly experienced U.S. Special Forces veterans, the R4E Optimized Duty Sights have five elements for sight alignment-three vertical features and two horizontal lines which produces a reticle type sight picture that improves target acquisition time. Tritium enhanced lines on the rear sight help improve target acquisition in low light conditions. This design provides the ability to swiftly line your sights up on the target, which is vital to any shooter, especially to law enforcement and defensive shooters.

The FT Family sights are fiber optic and tritium-enhanced rear sights to improve target acquisition in both day and night shooting situations. The new MEPROLIGHT FT Family includes tritium on top of fiber optics for extremely bright aiming point day and night; The sights are designed for Glock and Springfield pistols and are available in either orange or green.

-FRBS 4D

-FRBS 2D

ML12224 Green front and rear

ML12224 Orange front and rear

ML12224 O Green front and Orange rear

ML12224 G Orange front and Green rear

Glock


MEPROLIGHT HANDGUN NIGHT SIGHTS

Browning Hi-Power MkIIIBrowning/FN HP MkIIIML10885 Green front and rear Dovetail front and rear sights.

BerettaM9 and 92 Series ML10662 Green front and rear Front sight requires drilling of roll pin holes.

PX4 Storm F & G models ML10666 Green front and rear

PX4 Storm C & D models ML10667 Green front and rear

Glock® 17.19. 22, 23, 31, 32, 33, 34, 35, 37, 38, 39

ML10224 Green front and rearML10224-OGreen front and Orange rearML10224-Y Green front and Yellow rear

Glock® 26, 27, 28ML10226 Snag-Free Green front and rearML10226-OGreen front and Orange rearML10226-Y Green front and Yellow rear

Glock®

Thunder 9mm/40 S&W ML10240 Green front and rear

Bersa

The Mako Group is the exclusive U.S. importer and distributor of Meprolight self-illuminating night sights.

P7M8, M10 (not PSP)ML11515 Green front and rear USP full-sizeML11516 Green front and rearML11516-0 Green front and Orange rear ML11516-Y Green front and Yellow rearUSP compactML11517 Green front and rear ML11517-0 Green front and Orange rear

ML11517-Y Green front and Yellow rearP2000 Compact, Sub-compactML11519 Green front and rear

HK45, 45C, P30ML11545 Green front and rear

USP Full-size, Tactical, ExpertML21516 Adjustable Green front and adjustable rear

CZCZ P-01ML17775 Green front and #4 rear CZ-75, 83, 85ML17777 with current push-in front sight w/roll pin. Green front and #5 rear

IWI Jericho 941 post 2009ML19593 Green front and rear

Baby Eagle/Jericho 941 Pre-2009 Magnum Research ML19595 Green front and rear

Jericho/Baby Eagle

Glock cont.Fits Tac 1911 FS .45 ACP pistols; not for 2011 Tactical Series. ML19810 Green front and rear

NEW!Armscor/Rock Island

Colt 19115’’ and Commander 1911 ML10776 Green front and rear Stake on front sight For 80 and 90 Series Colt 1911s.

FNXFNX 9mm 40/45ML10888 Green front and rear

Glock® 42ML10222 Green front and rear

Glock® 20, 21, 29, 30, 36ML10220- Green front and rear ML10222-0 Green front and Orange rearML10220-Y Green front and Yellow rear

HK

Glock® 17.19, 20, 21, 22, 23, 34, 35 ML20224 Adjustable Green front and adjustable rear

Glock® 26, 27, 28ML20225 Ad-Com Green front and adjustable rear

Kahr

Magnum

Kahr Fixed Sights pre-Nov, 2004 ML15109 Green front and rear

Kahr K, P, MK, PM 9mm, .40S&W post-Nov, 2004 ML15120 Green front and rearKahr P380 (not CA compliant models) ML15139 Green front and rear

K, P, MP, PM 9mm, .40, .45 post-Nov, 2004

ML25123 Ad-Com Green front and rear

Jericho 941, Baby Eagle (Post- 2007) ML19593 Green front and rear

Baby Eagle (Pre 2007) ML19595 Green front and rear

Para Ordnance12.45, 14.40, 14.45 LDA Prior to 2007, dovetail sights & vertical slide serrations ML11801 Green front and rear

14.40, 14.45 LDA After 2007, with slanted slide serrations ML11802 Green front and rear



The Mako Group is the exclusive U.S. importer and distributor of Meprolight self-illuminating night sights.

Springfield ArmoryXD9, XD40 4’’ & 5’’ML11410 Green front and rearML11410-0 Green front and Orange rear ML11410-Y Green front and Yellow rear

XD45 4’’ & 5’ML11411 Green front and rear (If rear sight height is .250, use ML1140)ML11411-0 Green front and Orange rear ML11411-Y Green front and Yellow rearXDm pistolsML11420 Green front and rear

XD Sub-compactML21420 Ad-Com Green front and adjustable rear

WaltherAll P99, PPQ, PPQMML18801 Green front and rear

Walther PPSML18802 Green front and rear

Smith & Wesson3900, 4000 full-size, 5900, 6900 with Novak sights ML11735 Green front and rear1 7/8’’ J-Frame ML11760 Green front sight Pin-on front sightSW 1911 5’’ML11765 Green front and rearM&PML11766 Green front and rear

M&P Shield ML11770 Green Front and Rear

K, L, N-frame Revolvers with red-ramp front sight and fully adjustable rearML22770 Adjustable Green front and rear

K, L, N-frame Revolvers with pin-on front sight and fully adjustable rear. Not for use on mountain gunsML22771 Adjustable. Green pin-on front and rear

Sigma VE ML12740 Green front and rear

9mm/357SIG P-SeriesML10110Green #8 front and rear ML10110-0Green #8 front and Orange #8 rear ML10110-YGreen #8 front and Yellow #8 rear

40S&W/.45ACP SIG P-Series ML10129 Green #6 front and #8 rearML10129-OGreen #6 front and Orange #8 rearML10129-Y Green #6 front and Yellow #8 rear

Israeli Special

Forces

Ruger SIG

SIG P238 ML10138 Green #6 front and rear

SIG P220, P225, P226ML20110 Adjustable Green #8 front and adjustable #8 rear

MEPROLIGHT RIFLE & SHOTGUN NIGHT SIGHTS

P89 Series ML10990 Green front and rear

P90. P91, P93, P95ML10991 Green front and rear

SP101 .38 & .357ML10992 Green front sight

Ruger SR9, SR9C, SR40, SR40C ML10993 Green front and rear

P94, P97 ML10994 Green front and rear

P345ML10995 Green front and rear

LCR ML10997 Green front sight

GP100, Super RedhawkML20996 Adjustable Green front and rear



HK91, 93, 94, MP5ML31506 Green front and rear

Remington Shotgun cont.

M16, AR-15ML31618 Green A1 front and 2-dot rear Fits all sight systems that accept standard M16/AR-15 sights.

M16, AR-15ML31619 Green blade front and 4-dot rear Fits all sight systems that accept standard M16/AR-15 sights.Meprolight AR front sights are a two-piece system that allows the sight to be zeroed precisely. Once zeroed, the tritium dot can be rotated to face the shooter without affecting zero.Other brands require a full turn to keep the dot facing toward the shooter, resulting in an imprecise zero, or a half-turn, resulting in an imprecise zero and a glowing dot facing forward as well as toward the shooter.

M16, AR-15M16, AR-15 (A1 Style)ML31615 Green front sight Round A-1 style is thin for greater precision. Fits all front sight bases that accept standard M16/AR-15 sights.

Remington Shotgun6-48 thread bead 870, 1100, 11-87ML34045 Green front beadPre-2010 870, 1100, 11-87 with factory sights 7400, 7600 rifles ML34660 Green front and rear sight

Benelli ShotgunM1S90 (pre-2002)ML34301 Green front and rear

M1S90 (post-2002), Nova, SuperNova, M4 ML34302 Green front and rear

M2, Nova, SuperNova ML34303 Green front and rear

5-40 thread bead 500, 590, 835ML34044 Green front bead

500, 590 with factory rear ghost ring sight ML38501 Green front sight

AK RifleChinese Pattern AK 7.62x39 ML33110 Green front and rear Graduated to 800m

AKM Pattern AK (Soviet, Polish, Hungarian, Romanian, Egyptian, Etc.) 7.62x39 ML33115 Green front and rear Graduated to 1000m

Replacement ScrewsWalther Front Sight ScrewML40444Replacement screw for Walther front sights.

Replacement Front Sight ScrewML40450Replacement screw for Glock®, Sigma, and Walther front sights.

USIT Slide Support BlockML40451

USIT Pusher ScrewML40452

Kimber adapter for USITML40439

Universal Sight Installation ToolUSIT ML40440 Enables clean, damage-free installation of sights on all major manufacturers’ pistols.

Front and rear sights may be ordered in sets or individually. Please see website for details.

The Mako Group is the exclusive U.S. importer and distributor of Meprolight Self-Illuminated Night Sights.

Dealers and distributors may contact The Mako Group for pricing information for all models of Meprolight night sights and optics.

MEPROLIGHT RIFLE & SHOTGUN NIGHT SIGHTS

Galil Night SightsGalil Rifles (pre-2008) Century Golani ML39520 Green front and rear

Mini-14R S/N prefix 173 or lowerML30921 Green front Sight

Mini-14 S/N prefix 580 or higherML30923 Green front Sight

Israeli Special

Forces

Mossberg Shotgun

Ruger Mini 14

Sight Installation Tools

Slide Clamp for USITML40442

Post-2009 870, 1100, 11-87ML34662 Green front and rear sight

HK

12 THEMAKOGROUP.COM | 631-843-0490 | FAB DEFENSE

13THEMAKOGROUP.COM | 631-843-0490 | FAB DEFENSE

CHOOSING THE RIGHT STOCKBase stock choice on the weapon’s purpose.

COLLAPSIBLE STOCKSIdeal for compact fighting carbines, collapsible stocks are an advantage on any weapon’s system when body armor or thick clothing is worn. For CQB fighting, a collapsible stock makes a carbine compact and well balanced.

PRECISION STOCKSPrecision stocks for M16/AR-15 pattern rifles should have a longer length of pull for proper eye relief. They should be simple with just a few important features, like an adjustable cheekpiece or a monopod.

CHEEKPIECESCheekpieces are often necessary when using optics on weapons such as AK rifles or shotguns that were designed for a proper cheekweld with iron sights. Cheekpieces give the needed height for a precise cheekweld. Generally, they are not needed for flat-top M4/AR-15 rifles.

RECOIL COMPENSATIONRecoil compensation helps tame the recoil on heavier caliber rifles and on shotguns, while also reducing movement of the weapon and muzzle rise with any caliber.

BALANCEThe weight of the stock is an important factor in adjusting the overall balance of the weapon. Rifles with longer or heavier barrels can benefit from a heavier stock. Weight can be added to a stock to improve balance.

Collapsible combat stock with advanced features and better strength and ergonomics than standard M4 stocks

Six sling attachment points. Rubber buttpad. Storage compartment for two CR123 or AA batteries. Fits both MIL-SPEC and commercial receiver extensions. Anti-rattle device.

Available Accessories:

GCP Adjustable Cheek Riser for GLR-16

GPCP Cheek Riser with Picatinny Rails

SLS Quick Detach, Sling Swivel

Platform: M4/AR-15

Combines the excellent GLR-16 collapsible stock with an adjustable cheekpiece for use with carry handle-mounted optics or on weapons like AKs or shotguns that need extra cheek height.

Adjustable cheek piece. Six sling attachment points. Rubber buttpad. Storage compartment for two CR123 or AA batteries. Fits both MIL-SPEC and commercial receiver extensions. Anti-rattle device.



Platform: M4/AR-15

Combined with a removable cheek riser, it is intended to mount shell holders to shotgun buttstocks, but may be used for other purposes.

Adjustable cheek piece. Side Picitinny rail on each side of the stock. Multiple sling attachment points. Rubber buttpad. Storage compartment for two CR123 or AA batteries. Fits both MIL-SPEC and commercial receiver extensions. Anti-rattle device.



Platform: M4/AR-15

“I got everything in and it’s working great. The rubber pad actually stopped my weapon

from sliding off of a tin roof when I set it down to mount NVGs. RANGERS LEAD THE WAY!”

GLR-16CPGLR-16 GLR-16PCPIDF Issue M4/AR-15 Stock GLR-16 Stock with Cheek Riser GLR-16 with Side Rail Cheek Riser

AR15 - M16


Collapsible combat stock with recoil reduction system reduces felt recoil and muzzle rise for faster, more accurate fire. Ideal for 5.56 and large caliber M4/AR-15s, .308 AR-10s and our shotgun kits.

Five sling attachment points. Rubber buttpad. Storage compartment for two CR123 or AA batteries. Fits both MIL-SPEC and commercial receiver extensions. Anti-rattle device.


GSPC Adjustable Cheek Riser GSPCP Cheek Riser with Picatinny rails

MBA Precision Mono-pod stock extension

SRP Sniper Rubberized Buttpad

ARP Assault Rubberized Buttpad

SLS Quick detach, sling swivel

Platform: M4/AR-15

Combat stock with magazine well allows a spare magazine to be carried on the weapon. Ideal for sniper/marksman rifles as it allows two types of ammo to be carried ready on the rifle. Great for hunting for the same reason and for self-defense as it stores extra ammunition on the firearm. Accepts most M16/AR-15 magazines.

Includes 10-round 5.56/.223 Rem. magazine. Two sling attachment points. Rubber buttpad. Fits both MIL-SPEC and commercial receiver extensions. Anti-rattle device.






Platform: M4/AR-15

GL-MAGGL-SHOCKRecoil-Reducing M4/AR-15 Stock Survival Stock with 10 rd. Magazine

Combines the recoil-compensating capabilities of the GL-SHOCK with an adjustable cheekpiece for use with carry handle-mounted optics or on weapons like AKs or shotguns that need extra cheek height.

Adjustable cheekpiece. Five sling attachment points. Rubber buttpad. Storage compartment for two CR123 or AA batteries. Fits both MIL-SPEC and commercial receiver extensions. Anti-rattle device.





SLS Quick detach, sling swivelPlatform: M4/AR-15

GL-ShockCP

Allows rail-mounted accessories to be mounted on either side of a GL-Shock buttstock. Combined with a removable cheek riser, it is intended to mount shell holders to shotgun buttstocks, but may be used for other purposes.

Adjustable cheekpiece. Side Picatinny rail on each side of stock. Multiple sling attachment points. Rubber buttpad. Storage compartment for two CR123 or AA batteries. Fits both MIL-SPEC and commercial receiver extensions. Anti-rattle device.





SLS Quick detach, sling swivelPlatform: Shotguns, M4/AR-15

GL-ShockPCPGL-SHOCK Stock with Cheek Riser GL-SHOCK Stock with Side-Rail Cheek

Risers


Tough folding, adjustable cheekpiece stocks for Remington 870 or Mossberg 500/590 shotguns featuring a streamlined hinge. Combat tough and simple to operate.

Adjustable cheekpiece places the head at correct height for optic. Adjusts instantly for use with iron sights or bead. Stock locks in open position with robust claw. A button unlocks and allows the stock to be folded. Ambidextrous system can be switched to fold left or right. Rubber buttpad grips body armor and reduces felt recoil. Slim profile allows trigger manipulation when folded.

UAS870 Folding Shotgun Stock

Platform: Remington 870

UAS500 Folding Shotgun Stock

Platform: Mossberg 500/590/Maverick 88



Modular, collapsible military grade buttstock and pistol grip system for Remington 870 or Mossberg 500/590 shotguns.

Storage compartments in grip. Combat-proven GLR-16 stock with battery storage and rubber recoil pad, adjustable to six positions.

AGR870-FKSB & AGM500-FKSB feature a patented recoil-compensating system for unparalleled recoil reduction!

AGR870-FKSB Recoil-Reducing Collapsible Shotgun Stock


AGM500-FKSB Recoil-Reducing Collapsible Shotgun Stock


UAS870

UAS500

UAS870 / UAS500 Recoil-Reducing Collapsible Shotgun Stocks

AGR870-FKSB /AGM500-FKSB

Modular collapsible military grade buttstock and pistol grip system for Remington 870 or Mossberg 500/590 shotguns.

Storage compartment in grip. Combat-proven GLR-16 stock with battery storage and rubber recoil pad, adjustable to six positions.

AGR870-FK Collapsible Shotgun Stock


AGM500-FK Collapsible Shotgun Stock






AGR870-FK AGR870-FKSB

Collapsible Shotgun Stocks

AGR870-FK / AGM500-FK Polymer Folding Stocks with Cheek Riser

Shotguns: REMINGTON 870 / MOSSBERG 500/590

Clean, intuitive, sniper stock for use on the Israeli military’s SR25 sniper rifles. Also for M110 sniper rifles, MK12, M16/AR-15, many .50 BMG rifles and any other rifle that uses an M16 style stock. Ultimatesniper, varmint, or benchrest stock for the AR-15 or AR-10 platform.

Adjustable cheekpiece. Quick release monopad deploys instantly to desired height with touch of a button. Fine and extra-fine elevation adjustments, up to 6.5” of monopad height.

SSR25 Precision sniper stock

SSR25BTK SSR-25 with A2 receiver extension, buffer and spring

Platform: M16/SR25/M110/AR-15/AR-10

Precision Sniper StockSSR-25 / SSR25-BTK

AGM500-FKAGM500-FKSB

Recoil-Compensating Version



Modular, collapsible military grade buttstock and pistol grip system for Remington 870 or Mossberg 500/590 shotguns.

Stock locks in open position with robust claw. A button unlocks and allows the stock to be folded. Ambidextrous system can be switched to fold left or right. Storage compartments in grip. Combat-proven GLR-16 stock with battery storage and rubber recoil pad, adjustable to six positions.

AGRF870-FKSB & AGMF500-FKSB feature a patented recoil-compensating system for unparalleled recoil reduction!

AGRF870-FKSB Recoil-Reducing Collapsible Shotgun Stock


AGMF500-FKSB Recoil-Reducing Collapsible Shotgun Stock


Modular folding, collapsible buttstock and pistol grip system for Remington 870 or Mossberg 500/590 shotguns.

Stock locks in open position with robust claw. A button unlocks and allows the stock to be folded. Ambidextrous system can be switched to fold left or right. Storage compartments in grip. Combat-proven GLR-16 stock with battery storage and rubber recoil pad, adjustable to six positions.

AGRF870-FK Folding Collapsible Shotgun Stock

Platform: Remington 870AGMF500-FK Folding Collapsible Shotgun Stock






Recoil-Reducing Collapsible Folding Shotgun Stocks

QR Picatinny Shell Holder for 12ga Shotguns

Folding Collapsible Shotgun Stocks

AGR870-FKSB /

AGRF870-FK AGRF870-FKSB

AGRF870-FK / AGMF500-FK AGRF870-FKSB / AGMF500-FKSB SH-5

AGMF500-FK AGMF500-FKSB

Mounts five shotshells to any Picatinny rail. Ideal for mounting to side rail on a stock or forend. Holds shells securely upright or upside down for fast reloads.

SH-5 QR Picatinny Shell Holder for Shotguns Platform: 12 Gauge Shotguns

Provides an extra six rounds of 20-gauge for shotguns. Optimizes tactical shotgun readiness.

Easily attaches to a Picatinny rail with quick release. Extremely durable reinforced polymer composite construction. No gunsmithing required.

SH-6 QR Picatinny Shell Holder for Shotguns Platform: 20 Gauge Shotguns

SH-6QR Picatinny Shell Holder for 20ga Shotguns

AK-47

Combat stock with magazine well allows a spare magazine to be carried on the weapon. Ideal for marksman rifles as it allows two types of ammo to be carried ready on the rifle. Great for hunting for the same reason and for self-defense as it stores extra ammunition on the firearm. Accepts most AK-47/AKS/AKM magazines. Does not accept AK-74 magazines without alteration to stock.

Includes 10-round 7.62x39mm magazine. Two sling attachment points. Rubber buttpad. Fits both MIL-SPEC and commercial AK buttstock conversion tubes. Anti-rattle device.






Platform: AK-47, AKS, AKM

AK Stock with 10 rd. MagazineGK-MAG




Collapsible stock system reduces muzzle rise and felt recoil.

Patented built-in recoil-compensating mechanism. Unique receiver block that expands to perfectly fit stamped AK receivers when screws are tightened. Requires no fitting for most stamped AK-47/74 rifles. MIL-SPEC reinforced polymer composite.

SBT-K47FK Recoil-Compensating Stock & Tube Kit

SBT-K47 Recoil-Compensating Adapter Tube Only





Platform: AKS/AKM/AK-74 and clones

Recoil-Compensating Collapsible Stock Systems for AK Rifles

SBT-K47FK / SBT-K47

SBT-K47FK

SBT-K47

Cutaway View

Polymer Folding Collapsible Stocks for AK RiflesRugged military-grade AK folding collapsible stock systems.

Combat-proven GLR-16 stock with battery storage and rubber recoil pad, adjustable to six positions. Stock locks in open position with robust claw. A button unlocks and allows the stock to be folded. Ambidextrous system can be switched to fold left or right. AK version fits stamped receivers.

M4AKP SB model feature a built-in recoil-compensating mechanism.

M4AKP Folding Collapsible Stock - Polymer Hinge

M4AKP SB Recoil-Compensating version






M4AKP-SB

M4AKP

M4AKP / M4AKP SB

Rugged military-grade AK folding stock systems. Adjustable cheekweld for optics. Can be switched to fold left or right.

Adjustable cheekpiece places the head at correct height for optic. Adjusts instantly for use with iron sights. Stock locks in open position with robust claw. A button unlocks and allows the stock to be folded. Ambidextrous system can be switched to fold left or right. Rubber buttpad. Slim profile allows trigger manipulation when folded.




Polymer Folding Stocks with Cheek Riser for AK Rifles

UAS-AKP

Strongest military AK folding collapsible stock systems.

Combat-proven GLR-16 stock with battery storage and rubber recoil pad, adjustable to six positions. Steel adaptor utilizes the famous Galil folding mechanism. AK version fits stamped receivers.

M4AK SB models feature a built-in recoil-compensating mechanism.

M4AK Folding Collapsible Stock - Steel Hinge

M4AK SB Recoil-Compensating version






Steel Galil-Style Folding Collapsible Stocks for AK Rifles

M4AK

M4AK-SB

M4AK / M4AK SB

Strongest military AK folding stock system. Adjustable cheek weld for optics.

Adjustable cheek piece. Slim stock profile. Steel adaptor utilizes the famous Galil folding mechanism. Rubber buttpad.




Steel Galil-Style Folding Stock with Cheek Riser for AK Rifles

UAS-AK

AK-47/74: Stamped





Rugged military-grade folding collapsible stock systems. Combat-proven GLR-16 stock with battery storage and rubber recoil pad, adjustable to six positions. Stock locks in open position with robust claw. A button unlocks and allows the stock to be folded. Ambidextrous system can be switched to fold left or right. Fits milled receiver AK rifles.

M4-AKMILP SB model features a built-in recoil-compensating mechanism.





Platform: Milled Receiver AK Rifles

M4-AKMILP / M4-AKMILP SBFolding Collapsible Stocks for Milled AK Rifles

Rugged military-grade AK underfolder to side-folding stock system. Adjustable cheekweld for optics. Can be switched to fold left or right.

Adjustable cheekpiece. Slim stock profile. Stock locks in open position with robust claw. A button unlocks and allows the stock to be folded. Ambidextrous system can be switched to fold left or right. Rubber buttpad. Fits underfolding AK rifles.



Platform: Underfolder AK rifles

Underfolder to Side-Folding Conversion Stocks with Cheek Riser for Underfolder AKs

UAS-AKMSP

Milled Underfolder

Folding Stocks with Cheek Riser for Milled AK RiflesRugged military-grade side-folding stock system. Adjustable cheekweld for optics. Can be switched to fold left or right.

Adjustable cheekpiece places the head at correct height for optic. Adjusts instantly for use with iron sights. Stock locks in open position with robust claw. A button unlocks and allows the stock to be folded. Ambidextrous system can be switched to fold left or right. Rubber buttpad grips body armor and reduces felt recoil. Slim profile allows trigger manipulation when folded.


SLS Quick Detach, Sling Swivel Platform: Milled Receiver AK Rifles

UAS-AKMILP

“ABSOLUTELY worth the money! Great piece of gear. It folds to the side, and

the cheek piece is adjustable for a good cheek weld when using rails and optics. And the rubber piece at the butt of the

stock helps reduce felt recoil.” — Amazon 5-star review (UAS-MILP)

Collapsible Stock System for AK Rifles

RBT-K47FK / RBT-K47

Military-grade AK collapsible stock systems. Unique receiver block that expands to perfectly fit stamped AK receivers when screws are tightened. Requires no fitting for most stamped AK-47/74 rifles. MIL-SPEC reinforced polymer composite. Commercial profile tube.

RBT-K47FK Collapsible Stock & Tube Kit

RBT-K47 Collapsible Stock Adapter Tube Only






RBT-K47

RBT-K47FK M4-AKMILP

M4-AKMILP SBRecoil-Compensating

Version


VEPR

Folding Buttstock with Cheekpiece for VEPR 12 ‘Molot’Rugged military-grade folding stock system. Adjustable cheekweld for optics. Can be switched to fold left or right. Offers a supreme tactical upgrade for the VEPR 12 ‘Molot’

Imbedded adjustable cheekpiece design. Provides optimal eye-to-target alignment. Permits appropriate clearance for trigger access when in folded position. Integrated quick detach sling swivel connectors on both sides. Rubber buttpad for recoil and slipping reduction.

Available Accessories:SLS Quick Detach, Sling Swivel Platform: VEPR 12 ‘Molot’

UAS-VEPR

NEW!

Rugged military-grade Krinkov folding collapsible stock systems. Combat-proven GLR-16 stock with battery storage and rubber recoil pad, adjustable to six positions. Stock locks in open position with robust claw. A button unlocks and allows the stock to be folded. Ambidextrous system can be switched to fold left or right. Fits Krinkov AK rifles.

M4-AKSP SB model features a built-in recoil-compensating mechanism.

M4-AKSP Folding Collapsible Stock for Krinkov

M4-AKSP SB Recoil-Compensating Folding Collapsible Stock for Krinkov





Platform: AKS-74U Krinkov

Folding Collapsible Stock for Krinkov

M4-AKMSP

M4-AKSP SB

M4-AKSP

AKS-74U

Rugged military-grade AK folding collapsible stock systems. Combat-proven GLR-16 stock with battery storage and rubber recoil pad, adjustable to six positions. Stock locks in open position with robust claw. A button unlocks and allows the stock to be folded. Ambidextrous system can be switched to fold left or right.

M4-AKMSP SB model features a built-in recoil-compensating mechanism.

M4-AKMSP Underfolder to Side-Folder Conversion

M4-AKMSP SB Recoil Compensating Underfolder to Side-Folder ConversionAvailable Accessories:




Platform: Underfolder AK Rifles

M4-AKMSP / M4-AKMSP SBUnderfolder to Folding Collapsible Conversion for AK Underfolder Rifles

Folding Stocks with Cheek Riser for KrinkovTough folding, adjustable cheekpiece stocks for Krinkov shotguns featuring a streamlined hinge. Combat tough and simple to operate.

Adjustable cheekpiece places the head at correct height for optic. Adjusts instantly for use with iron sights or bead. Stock locks in open position with robust claw. A button unlocks and allows the stock to be folded. Ambidextrous system can be switched to fold left or right. Rubber buttpad grips body armor and reduces felt recoil. Slim profile allows trigger manipulation when folded. Fits Krinkov AK rifles.



Platform: AKS-74U Krinkov

UAS-AKSP

M4-AKMSP SB

Israeli Special

Forces

M4-AKSP / M4-AKSP SB




M4-SAIGA

M4-SAIGA SB

M4-SAIGA SB

Folding and/or Collapsible Stocks with Cheek Riser for AK-100 Series Rifles Rugged military-grade AK-100 series stock systems. Adjustable cheekweld for optics.

Imbedded adjustable cheekpiece design. Provides optimal eye-to-target alignment Slim stock profile. Modular system. Rubber buttpad. Integrated quick detach sling swivel connectors on both sides. Rubber buttpad for recoil and slipping reduction.

UAS-SAIGAP features a Polymer folding joint that can be switched from left to right side fold.

UAS-SAIGA AK 100 Stock with built in cheek riser

UAS-SAIGAP Folding Stock for AK-100 with built in cheek riser



Platform: AK-100 Series Rifles

UAS-SAIGA

SAIGA

Folding and/or Collapsible Stocks for AK-100 Series Rifles

Recoil Reducing, Folding and/or Collapsible Stocks for AK-100 Series Rifles

Rugged military-grade AK-100 series folding collapsible stock systems. Combat-proven GLR-16 stock with battery storage and rubber recoil pad, adjustable to six positions. Super-strong streamlined hinge.

M4-SAIGAP features a Polymer folding joint that can be switched from left to right side fold.

M4-SAIGAP Folding Collapsible Stock for AK-100 Series

M4-SAIGAP SB Folding Collapsible Folding Stock for AK-100






M4-SAIGAP SB

Rugged military-grade AK-100 series collapsible stock systems. Combat-proven GLR-16 stock with battery storage and rubber recoil pad, adjustable to six positions. Fits 100 series AK rifles.

M4-SAIGA Collapsible Stock for AK-100 Series

M4-SAIGA SB Collapsible Folding Stock for AK-100






M4-SAIGA / M4-SAIGA SBM4 Collapsible Buttstock for VEPR 12 ‘Molot’

M4VEPR-FK / M4VEPR-FKSB

NEW!

M4VEPR-FK

M4VEPR-FKSB

Rugged military-grade AK folding collapsible stock systems for the VEPR 12 ‘Molot’. Combat-proven GLR-16 stock with battery storage and rubber recoil pad, adjustable to six positions. Collapsible buttstock enhances performance and weapon versatility for a quality tactical upgrade.

M4VEPR-FKSB model features a built-in recoil-compensating mechanism.

M4VEPR-FK Collapsible Buttstock

M4VEPR-FKSB Collapsible Buttstock with Shock Absorber





Platform: VEPR 12 ‘Molot’





Israeli Special

Forces

M4VZSB

M4VZ

M4VZPSB

Rugged military-grade vz.58 folding collapsible stock systems. Combat-proven GLR-16 stock with battery storage and rubber recoil pad, adjustable to six positions. Stock locks in open position with robust claw. A button unlocks and allows the stock to be folded. Ambidextrous system can be switched to fold left or right.

M4VZPSB models feature a built-in recoil-compensating mechanism.

M4VZP Folding Collapsible Stock - Polymer Hinge

M4VZPSB Recoil-Compensating - Polymer Hinge





Platform: Sa vz.58/Century VZ-2008

May require slight fitting for some Century VZ-2008s.

Recoil Compensating Folding Collapsible Stocks for Sa vz.58

Folding Collapsible Stocks for Sa vz.58Strongest military vz.58 folding collapsible stock systems. Combat-proven GLR-16 stock with battery storage and rubber recoil pad, adjustable to six positions. Steel adaptor utilizes the famous Galil folding mechanism.

M4VZSB models feature a built-in recoil-compensating mechanism.

M4VZ Folding Collapsible Stock - Steel Hinge

M4VZSB Recoil-Compensating - Steel Hinge Available Accessories:






SBT-V58

SBT-V58FK

M4VZ / M4VZSB M4VZP / M4VZPSB SBT-V58FK / SBT-V58

M4VZ

UAS-VZP

VZ58

UAS-VZ / UAS-VZPSteel or Polymer Folding Stock with Built-in Cheek Riser

UAS-VZ

Strongest military vz.58 folding stock system. Adjustable cheek weld for optics. Adjustable cheek piece. Slim stock profile. Steel or Polymer hinge. Rubber buttpad.

UAS-VZ Galil-Style Folding Stock - Steel Hinge

UAS-VZP Folding Combat Stock - Polymer Hinge



Platform: SA vz .58/Century VZ-2008

May require slight fitting for some Century VZ-2008.

Recoil Compensating Collapsible Stock System for Sa vz.58

Collapsible stock system reduces muzzle rise and felt recoil. Patented built-in recoil-compensating mechanism. Unique receiver block that expands to perfectly fit sa vz.58 receivers when screws are tightened. MIL-SPEC reinforced polymer composite.

SBT-V58FK models includes combat-proven GLR-16 buttstock with battery storage and rubber buttpad.

SBT-V58 Recoil-Compensating Tube

SBT-V58FK Recoil-Compensating Buttstock Kit










Galil

The UAS-ZASP replaces the original Zastava stock with a slim folding stock with built-in adjustable cheek rest for increased accuracy when using optics.

Non-slip buttpad design helps keep the weapon secure in the fighting position. Built-in adjustable cheek rest with five settings allows shooter to select optimal placement when using optics-great for long distance. Left folding stock be design which folds quickly with the simple push of a button. Inte-grated quick detach sling connectors on both sides. Available in black, olive drab or desert tan.

The M4-ZASP replaces the original Zastava stock with an M4 style collapsible side folding stock.

Platform: Zastava

The UAS-ZASP replaces the original Zastava stock with a slim folding stock with built-in adjustable Cheek Rest for increased accuracy when using optics.

Non-slip buttpad design helps keep the weapon secure in the fighting position. Built-in adjustable cheek rest with five settings allows shooter to select optimal placement when using optics-great for long distance. Left folding stock be design which folds quickly with the simple push of a button. Integrated quick detach sling connectors on both sides. Available in black, olive drab or desert tan.

The M4-ZASP replaces the original Zastava stock with an M4 style collapsible side folding stock.

Platform: Zastava

UAS-ZASP M4-ZASPSB

M4-ZASP

M4-ZAS PSB

Folding adjustable butt stock with adjustable cheekpiece to optimize shooting accuracy when using optics. Replaces the original stock and fits Galil and Short Galil models. (Does not fit Micro Galil)

Non-slip buttpad design helps keep the weapon secure in the fighting position. Built-in adjust-able cheek rest with five settings allows shooter to select optimal placement when using op-tics-great for long distance. Left folding stock be design which folds quickly with the simple push of a button. Integrated quick detach sling connectors on both sides. Available in black, olive drab or desert tan.

Platform: Galil

UAS GALIL PM4FAL-FK

FN-FAL

Modular collapsible military grade buttstock for the FN FAL rifle. Collapsible, combat-proven GLR-16 stock with battery storage and rubber recoil pad, adjustable to six positions.





Platform: FN FAL

M4 Collapsible Buttstock System for FN FAL



HK

Folding adjustable butt stock with adjustable cheekpiece to optimize shooting accuracy when using optics. Replaces the original stock and fits Galil and Short Galil models. (Does not fit Micro Galil)

Non-slip buttpad design helps keep the weapon secure in the fighting position. Built-in adjust-able cheek rest with five settings allows shooter to select optimal placement when using op-tics-great for long distance. Left folding stock be design which folds quickly with the simple push of a button. Integrated quick detach sling connectors on both sides. Available in black, olive drab or desert tan.

Platform: Galil

M4 GALIL P / M4 GALIL P SB

Rugged military grade aluminum and steel side folding stock with adjustable stock angle for proper sight picture.

Friction lock and unlock enable rapid deployment. Adjustable stock angle for proper sight picture. Rubber buttpad grips body armor and reduces felt recoil. Slim profile allows trigger manipulation when folded.

Accessories:




Platform: HK MP5 and clones

Aluminum Tactical Folding Buttstock for MP5

MP5-FS

Rugged military-grade AK folding collapsible stock systems for HK MP5. Combat-proven GLR-16 stock with battery storage and rubber recoil pad, adjustable to six positions. Stock locks in open position with robust claw. A button unlocks and allows the stock to be folded. Ambidextrous system can be switched to fold left or right. HK MP5 version fits stamped receivers.

Accessories:





Collapsible Folding Stock for MP5

M4-MP5-FK

Tough folding, adjustable cheekpiece stocks for HK MP5 and clones featuring a streamlined hinge. Combat tough and simple to operate.

Adjustable cheekpiece places the head at correct height for optic. Adjusts instantly for use with iron sights or bead. Stock locks in open position with robust claw. A button unlocks and allows the stock to be folded. Ambidextrous system can be switched to fold left or right. Rubber buttpad grips body armor and reduces felt recoil. Slim profile allows trigger manipulation when folded.

Accessories:



Polymer Folding Stock with Cheek Riser for HK MP5 and Clones

UAS-MP5

M4 GALIL P

M4 GALIL PSBRecoil-Compensating

Version


Ruger

Allows proper use of sights by personnel wearing helmets and visors for riot control. Adjustable length of pull. Rubber buttpad. Folds for concealment. Aluminum Construction.

MP5-ARS Anti-Riot Stock for Riot Helmets/Visors


MP7-ARS Anti-Riot Stock for Riot Helmets/Visors

Platform: HK MP7

Folding Collapsible Stock Systems for use with Riot Control Visor/Helmets

MP5-ARS / MP5K-ARS / MP7-ARS

M4 R10/22

M4 RPRO10/22 UAS RPRO10/22

UAS R10/22

M4 R10/22 / M4 RPRO10/22M4 R10/22 M4 Collapsible Stock Conversion Kit upgrades the Ruger 10/22 into the tactical M4 design. This unique stock offers the perfect combi-nation of a classic bench-rest design with modern tactical versatility.

Fast and easy drop-in installation. Side and lower rails are 1913 MIL-SPEC Picatinny. Collapsible five length point buttstock system with left hand folding for compact storage. Ergonomic pistol grip design prevents wrist fatigue and ensures a proper grip. Finger grooves and shaped backstrap improves trigger control. Fits all standard and bull barreled Ruger 10/22 rifles.

UAS R10/22 / UAS RPRO 10/22Upgrade your Ruger 10/22 into the tactical UAS design. This unique stock offers the perfect combi-nation of a classic bench-rest design with modern tactical versatility.

Fast and easy drop-in installation. Side and lower rails are 1913 MIL-SPEC Picatinny. Collapsible five length point buttstock system with left hand folding for compact storage. Ergonomic pistol grip design prevents wrist fatigue and ensures a proper grip. Finger grooves and shaped backstrap improves trigger control. Fits all standard and bull barreled Ruger 10/22 rifles.

Modular collapsible military grade buttstock for the H&K G3 rifle. Combat-proven GLR-16 stock with battery storage and rubber recoil pad, adjustable to six positions.

Accessories:




Platform: H&K G3

Collapsible Buttstock System for H&K G3

M4G3-FK

Opened Opened

OpenedOpened

Closed Closed

ClosedClosed

NEW!


M203

FD-203

Converts M203 or other launchers to a compact standalone weapon system. Allows mounting of sights or optics. Also ideal for less lethal systems.

Side folding stock for compact and quick deployment. Ergonomic pistol grip for added stability and control to ensure first round hit.

Platform: M203 and similar launchers

We recommend the use of the Meprolight GLS grenade launcher sight with this system. The GLS is proven in testing by several militaries to increase first-round hit probability more than any other grenade launcher sight and can be mounted centered on the weapon, it’s ideal for a standalone launcher.

Mepro GLS see page 7.

Folding Grenade Launcher Stock

UAS RPRO10/22

GPCP / GSPCP


GPCP Cheek Piece for GLR-16 GSPCP Cheek Piece for GL-SHOCK

Stock not included

Side Rail Cheek Riser for GLR-16 and GL-SHOCK Stocks

GSPCPGSPC

GPCP

CheekpiecesCheekpieces

should be added to collapsible

stocks on AKs, vz58s, or

shotguns for a correct

cheekweld when using optics.

GCP / GSPC


GCP Cheek Piece for GLR-16 GSPC Cheek Piece for GL-SHOCK

Adjustable Cheek Riser for GLR-16 and GL-SHOCK Stocks

GCP

Butt Stock Accessories

MBA

Extends length of pull for collapsible stocks and provides a precision monopod. It is difficult on M16/AR-15 platform rifles to mount optics far enough forward for correct eye relief. The MBA extends the length of pull for proper eye relief. The monopod allows for very precise shooting when combined with a bipod.

Precision monopod and rubber buttpad. Monopod instantly deploys to desired height with the touch of a button. Course and fine elevation adjustment. Fully retracts with the touch of a button. Very large adjustment range.


MBA Precision Monopod for GL-MAG & GL-SHOCK

Platform: GL-Shock, GL-Shock CP, GL-Shock PCP, GL-Mag, GK-Mag

Precision Monopod Stock Extension


M16 / AR-15

RAIL SYSTEMS, RAILS & HANDGUARDSCreating a modern, modular weapon system.

ALUMINUM RAIL SYSTEMSAluminum rail systems offer the best modularity and strength. With plenty of rail space, they provide flexibility in mounting accessories. Our rails are designed for absolute reliability, durability, simplicity and compactness. Mounting methods are innovative and require no alteration of host weapons. If you need absolute reassurance that your weapon system can stand up to the worst abuse, our aluminum rail systems are a necessity. Most are issued equipment for IDF Special Ops units and other militaries.

FREE-FLOAT RAIL SYSTEMSM16, M4 and AR-15 accuracy can often be affected by pressure on the handguards. Free-floating the barrel solves this problem. If you will be taking intermediate to long-range shots in which precision is vital, consider a free-float rail system, such as the VFR. For most CQB and general combat purposes, a non-free float rail system works fine.

POLYMER RAILED HANDGUARDSMany soldiers and law enforcement officers find that the weight and expense of aluminum rail systems are unnecessary. Advanced modern polymer technology, coupled with designs that build on the strengths of the polymer material, result in military-strength handguards with the right balance of durability and light weight, with only necessary rails. Polymer handguards provide heat protection for the shooter’s hands and are less abrasive against slings and gear than aluminum rail systems. Our polymer handguards are the ideal choice for many situations and are used by militaries and law enforcement organizations.

Provides two 45º rails or a top or bottom rail for accessories on upper or lower issue handguards. Excellent positioning for tactical lights and lasers. Rails are parallel to bore. MIL-SPEC reinforced polymer composite. Designed for M16/M4/AR-15, can be modified to fit other weapons.

DPR16/4 Dual Picatinny rails for Handguards

UPR16/4 Improved Picatinny Rail for Handguards

Platform: M4, M16 or AR15 Rifles or Carbines

UPR16/4

Picatinny Rails for Handguards

HG-S

Superb quality M4-style handguards. Thick reflective aluminum double heat shield. Extra tough MIL-SPEC reinforced polymer composite and aluminum exceeds military requirements. DPR16/4 and UPR16/4 can be installed to add rails to these handguards. Strong, light and simple. Thin carbine profile, not the wider profile. Drop-in fit. Replaces original handguards.

Platform: M4, M16 or AR15 Carbines

Tough Polymer Handguards

MGCP

Optimizes original Galil stocks for use with optics. Can also be used on Tapco AK stocks by drilling one hole.

Platform: Galil, Micro Galil and clones

Adjustable Cheek Riser for Galil/Micro Galil Stocks

This maneuverability enhancing upgrade for GL-SHOCK, GL-MAG or GK-MAG Buttstocks provides rapid shoulder positioning and faster, more comfortable target change.

Reinforced polymer composite construction with textured rubber overmold. Non-slip textured rubber allows fast and stable shoulder positioning.

Platform: GL-Shock, GL-Shock CP, GL-Shock PCP, GL-Mag, GK-Mag

ARP

Assault Rubberized Buttpad & Sniper Rubberized Buttpad

SRP

ARP / SRP

DPR16/4 / UPR16/4


Israeli Special

Forces

Designed for simplicity. Clean, rugged, l ightweight and economical solution for installing MIL-STD-1913 rails on carbines.

Fits much tighter than normal polymer handguards and indexes to barrel nut for zero movement. No top rail for low profile; clearance for extended risers, or scopes. Rails are in ideal forward position. Double aluminum heat shields. MIL-SPEC reinforced polymer composite and aluminum.


DPR16/4 Dual Picatinny rails for Handguards

UPR16/4 Improved Picatinny Rail for Handguards

Platform: M4, M16 or AR15 Carbines

IDF Polymer Railed Handguards

FGR-3

Free-floating rail system with extended top rail. Designed to be solid but light. Rails may be removed for less weight or installed in any of eight locations. The VFR was the first system of this style

Locks to top rail and to barrel nut for total stability. Installs without requiring any disassembly or reconfiguration of the carbine. Uses standard barrel nut. Does not require removal of delta ring or front sight tower. Hard coat anodized 6061 T6 aluminum. VFR-C fits carbines with non-removable carry handles.

VFR Modular Free-Float Rail System – Flat Top

VFR-C Modular Free-Float Rail System – Carry Handle

Platform: M4 or AR15 Carbines

These rail systems are built by FAB Defense in Israel to MIL-SPEC standards.

VFR-C

Carry Handle Version

VFR

Modular Free-float Rail SystemsIDF Extended Aluminum Rail System

VFR

Extended rail system for carbines offers more rail space to mount accessories further forward.

Lightweight construction. Extended length rails. Clearance for standard front sight tower or railed gas block. Incorporates 7 QD sling swivel sockets. MIL-STD 1913 rails. Manufactured with solid aviation grade 6061 T6 aluminum.

Platform: M4, AR-15 with Carbine Gas Systems

NFR-EX VFR

Built for IDF Special Ops units, The NFR provides an ultra-reliable rail platform while keeping the bulk and weight of the weapon down.

Locks to barrel nut for solid mount. Installs without requiring any disassembly or reconfiguration of the carbine. Uses standard barrel nut. Does not require removal of delta ring or front sight tower. Extended top rail is the same height as flat-top upper. Hard coat anodized 6061 T6 aluminum.

NFR Slim Combat Rail System – Carbine

NFR-M5 Slim Combat Rail System – Mid-length

NFR-RL Slim Combat Rail System – Rifle


NFR-M5

NFR-RLRifle Length

NFR

Slim IDF G-mount Rail System

NFR


AKS-74UAK-47/74

Israeli Special

Forces

Handguards for AK, 47/74

AK-L/U

Provide modern, lightweight handguards for AK rifles. Strong and secure enough to mount optics. Used by militaries worldwide.

Made from super-strong reinforced polymer that exceeds MIL-SPEC requirements. Protects hands from heat.

AK-L/U Handguard Rail System – AK-47

AKL-47 Lower Handguard Rail System – AK-47

AKU-47 Upper Handguard Rail System – AK-47


AK-L/U

Provides optimal utilization of four Picatinny rails for tactical lights, optics, foregrips, bipods or any other Picatinny compatible attachment. Precise and secure attachment for all AKS 74U “Krinkov” Picatinny mounting options.

Four versatile Picatinny rails. State-of-the-art ergonomic design and durable, lightweight construction. Quick and easy installation; no gunsmithing or modification required. Constructed from reinforced polymer composite.

Platform: AKS 74U

AKS74U “Krinkov” Polymer Quad Rail Handguards

KPR VFR-AK

Allows optics to be mounted in a traditional location above the receiver. It is the most rigid platform available today for AK. Unique mounting system adapts to variations in rifles. Adds rigidity to the weapon, increasing accuracy in many AKs. Modernizes the AKS, AKM, AK-74 and similar weapons.

Designed for military special operations use. Precision machined from solid blocks of 6061 T6 aluminum and hard coat anodized. MIL-STD-1913 rails. Drop-in installation. Fits some non-standard weapons, like Polish Tantal rifles. Top rail does not touch gas tube, and can be removed and replaced with return to zero. Weapon can be disassembled with top rail in place. Works well for mounting night vision systems. The strongest available AK rail system.


Optic-Ready AK Combat Rail SystemBarrel Rail Mounts

BSR-1 / BDR-2

Install rails above, below, or on both sides of the barrel. Precision machined from aviation-grade aluminum for stability and accuracy.

BSR-1 Single Barrel Rail Mount

BDR-2 Double Barrel Rail Mount

BDR-2

BSR-1


RPK

Combat Rail System for RPK

VFR-RPK

Brings modern modularity to the RPK weapons system. Built for military use. Machined from solid blocks of 6061 T6 aluminum. Hard coat anodized. Drop-in installation.

Platform: RPK

VZ-58Dragunov

Polymer Handguards for vz.58

Provide modern, lightweight handguards for vz.58 rifles. Strong and secure enough to mount optics. Used by militaries worldwide. SA-58 is issued to Czech military.




SA-58VFR-VZ VFR-SVD

The first military-quality aluminum rail system available for the vz.58. Mounts securely to retain zero of optics. Top rail replaces gas tube and redirects expended gas to keep rail system cool. The only top rail that does not mount like the stock gas tube, allowing much better zero retention for mounted optics.

Designed to modernize the vz.58 for hard military use. Precision machined from 6061 T6 aluminum. Hard coat anodized. MIL-STD-1913 rails. Drop-in installation.



Combat Rail System for SA vz.58Combat Rail Syster for Dragunov Sniper Rifle

The VFR-SVD rail system upgrades tactical performance and improves ventilation for the Dragunov Sniper Rifle.

The Aluminum, Quad 1913 MIL-STD picatinny rail allows for versatile mounting options. It’s been field tested under extreme conditions and installation is quick and easy.

Platform: Dragunov Sniper Rifle 7.62 x 54 mm


Compact Combat Rail Systems for HK

MP5-RS / MP5-KRS / G3-RS

Combat rail systems for HK weapons. Unlike rail systems that mount like the issue handguards, these rail systems lock solidly to the receiver, basically becoming an extension of the receiver itself. Totally movement-free once mounted.

Slim and lightweight. Drop-in installation Hard coat anodized 6061 T6 aluminum.

MP5-RS Compact Combat Rail System - HK MP5

Platform: MP5, HK53 and clones

MP5-KRS Compact Combat Rail System - HK-MP5K

Platform: MP5K and clones

G3-RS Compact Combat Rail System - G3/HK-91

Platform: G3/HK91 and clones

G3-RS

MP5-K

MP5-RS

HKMicro Galil

Gives the Micro Galil a lightweight and functional handguard with a tactical light mount.

Mount 1-1/8'' diameter tactical lights (i.e. Stinger) on the Micro Galil. MIL-SPEC reinforced polymer composite.

Platform: Micro Galil

Combat Rail System for Micro Galil

GX6

Gives the Micro Galil a sleek rock solid mounting solution for optics and accessories that is impervious to hard field use.

GX6 mounts to the front site of the Miicro Galil to provide a floating six rail system that does not restrict the barrel.

Platform: Micro Galil

Galil

Combat Rail Systems for Galil

VFR-GA

The VFR-SVD Aluminum Quad Rail System upgrades tactical performance, ventilation and versatility for the Dragunov Sniper Rifle.

Precision machined out of 6061 T6 aluminum, the VFR-SVD has four 1913 MIL-SPEC Picatinny rails which will accommodate all Picatinny based accessories. Perfect alignment with the receiver is secured with anti-rotation locking tabs. Easy to install, no Gunsmith needed.

Platform: Galil and clones

Polymer Handguards for Galil Rifles

Provide modern, lightweight handguards for Galil rifles. Strong and secure enough to mount optics. Used by militaries worldwide.


Platform: Galil and clones

PRG

KAPI-2Micro Galil Handguard with Stinger Tactical Light Mount


Rail Systems for Uzi and Mini Uzi Tavor Handguard Rail

Modernizes Uzi’s with the ability to mount combat equipment, like lights or foregrips. Lightweight compact military rail systems. Drop-in installation. Hard coat anodized 6061 T6 aluminum. Group Industries (i.e. Vector Arms) receivers are slightly larger than spec and will require slight fitting of rail systems.

UTR Combat Rail System - Uzi

Platform: Uzi and clones

UTR-M Combat Rail System - Mini Uzi

Platform: Mini Uzi and clones

UTR / UTR-M

UTR-M

UTR

Uzi BenelliTavor

M-240

Combat Rail System for M-240 (FN MAG)

VFR-MAG

Replaces the original handguard and provides mounting options for lasers, optics, bipods or any other Picatinny rail based accessories.

Will not move or vibrate on the weapon under any conditions. Lightweight and strong. Made from 6061 T6 aircraft aluminum. All Rails 1913 Mil Spec. Hard Coat Anodized. Easy to mount, no gunsmithing required. Weapon handling remains unchanged.

Platform: M240 Machine Gun/FN MAG

Ultra-light stable rail platform to mount accessories on Benelli M4s with removable side rails. Lower rail and two removable side rails. Top rail for optics and lasers. MIL-SPEC reinforced polymer composite.

Platform: Benelli M4

Benelli M4 Quad-Rail Handguard

BM-4

Allows the mounting of accessories on Tavor handguards. Easy attachment. Requires a mounting hole to be added to the handguard. MIL-STD 1913 rail. Manufactured with solid aviation grade 6061 T6 aluminum.

Platform: Tavor

UPT

Remington 870 / Mossberg 500/590

Tactical Forends for Remington 870 and Mossberg 500/590

PR-870 / PR-MO

Rugged tactical forearm rail system for shotguns. Streamlined and lightweight with removable side rails. Provides strong platform on which to mount required accessories. MIL-SPEC reinforced polymer composite.

PR-870 Remington 870 Handguard with 3 Rails


PR-MO Mossberg 500/590 Handguard with 3 Rails

Platform: Mossberg 500/590

PR-870

PR-MO


AK-47/74

AG-47S

Designed for better control of weapon, particularly when holding the weapon with one hand during reloading or when clearing malfunctions. Provides a better shooting angle, better grip, and reduces wrist fatigue.

High-quality pistol grips for AK-47 rifles improve trigger operation. Advanced ergonomic design prevents wrist fatigue and ensures secure grip in wet conditions. Built-in storage with removable cushioned battery holder. Includes mounting hardware. MIL-SPEC reinforced polymer composite. Used by IDF and Czech Special Forces.

Platform: AKS/AKM/AK-74, Galil and clones

Military Pistol Grips for AK-47/74 Rifles

Israeli Special

Forces

PISTOL GRIPSCutting through the hype.

WHAT DO I REALLY NEED IN A GRIP?So many grips on the market are now loaded with features, but are they all necessary? What should you look for in a grip?

SIMPLE DESIGNGrips should be simple and functional, designed to work well for most shooters. Sometimes the simplest looking grips reflect the most careful engineering. FAB grips, designed in cooperation with the Israeli military, are well suited for almost all shooters, regardless of hand size and other factors.

GRIP ANGLEThe grip angle must allow a precise trigger pull and reduce wrist fatigue.

CONTROL AND RETENTIONMost grips work fine when firing, but there are many times when the weapon must be held with only one hand. Reloading, malfunctions, dealing with bystanders or controlling a threat – all of these situations involve holding a weapon only by the grip, often while moving quickly or manipulating the action. FAB grips are designed with this in mind. Students in our carbine courses often replace their various grips with FAB’s once they experience realistic manipulation of their weapons. Our grips may look simple compared to others, but the difference felt in the hand is striking.

AG-43 / AGF-43S

Designed for better control of weapon, particularly when holding the weapon with one hand during reloading or when clearing malfunctions. Provides a better shooting angle, better grip and reduces wrist fatigue.

Finger swelts and a backstrap shape designed to enhance grip. Extended beavertail for better control by allowing higher firmer hold. Storage area with hinged door. MIL-SPEC reinforced polymer composite. Also fits .308 receivers better than most beavertail-style grips. Issued to the IDF.

AG-43 Israeli Defense Forces Pistol Grip


AGF-43S Ergonomic Folding Pistol Grip


These military-issue grips are built by FAB Defense in Israel to MIL-SPEC standards.

M16 / AR-15

AGF-43S

AG-43

IDF Pistol Grips for M16/M4/AR-15

Designed for better control of weapon, particularly when holding the weapon with one hand during reloading or when clearing malfunctions. Provides a better shooting angle, better grip and reduces wrist fatigue. Rubber overmold allows comfort with aggressive texture.

Finger swelt and a backstrap shape designed to enhance grip. Allows higher, firmer hold. Rubber overmold is a type of rubber that is much more resistant to chemicals and dirt than other rubbers commonly used in grips. Storage area with hinged door. MIL-SPEC reinforced polymer composite.

AGR-43 Rubberized Pistol Grip for M16/AR-15


AGR-47 Rubberized Pistol Grip for AK Rifles


New Rubberized Grips!

AGR-43 Rubber Overmolded

Pistol Grips


VZ.58 FN FAL

High-quality ergonomic pistol grip enhances grip control, reduces slipping and wrist fatigue, and improves trigger operation and overall control during firing sequences.

Finger groove and backstrap shape for an enhanced, more comfortable grip. Extended beavertail enables higher, firmer hold for superior weapon handling. Includes storage compartment with removable battery compartment.

Platform: FN FAL

To provide a stable shooting platform for use in conjunction with a bipod.

Adjustable height provides greater comfort and control .Advanced ergonomic design with adjustable palm rest. Adapts easily to different size hands. Puts pressure in the palm of the hand to allow deliberate and calculated trigger pull. MIL-SPEC reinforced polymer composite.

Platform: FN FALAGM500

Ergonomic Pistol Grip for FN FAL

AG-FALAGR47 AG-58

SG-1

Designed for better control of weapon, particularly when holding the weapon with one hand during reloading or when clearing malfunctions. Provides a better shooting angle, better grip and reduces wrist fatigue. Rubber overmold allows comfort with aggressive texture.

Finger swelt and a backstrap shape designed to enhance grip. Allows higher, firmer hold. Rubber overmold is a type of rubber that is much more resistant to chemicals and dirt than other rubbers commonly used in grips. Storage area with hinged door. MIL-SPEC reinforced polymer composite.


Rubber Overmolded Pistol Grips

Precision Sniper Grip for AK rifles

Designed for better control of weapon, particularly when holding the weapon with one hand during reloading or when clearing malfunctions. Provides a better shooting angle, better grip and reduces wrist fatigue.

High-quality pistol grips for SA vz.58 rifles improve trigger operation. Advanced ergonomic design prevents wrist fatigue and ensures secure grip in wet conditions. Built-in storage with removable cushioned battery holder. Includes mounting hardware. MIL-SPEC reinforced polymer composite. Used by IDF and Czech Special Forces.


Military Pistol Grips for SA vz.58 Rifles

REMINGTON 870 / MOSSBERG 500

Ergonomic modular pistol grip for Remington 870 or Mossberg 500/590 shotguns. Allows attachment of any M4-compatible buffer tube for mounting M4 stocks.

Rugged one piece design. Correct angle for best recoil control and quick sight picture recovery. Textured for secure grip when wet. Allows attachment of any M4-compatible buffer tube for mounting M4 stocks. Storage compartment in grip. Interfaces with the UAS or AGR tactical buttstock systems (page 7). MIL-SPEC reinforced polymer composite.

AGR870 Remington 870 Pistol Grip


AGM500 Mossberg 500/590 Pistol Grip

Platform: Mossberg 500/590

AGM500

Pistol Grips for Remington 870 and Mossberg 500/590

AGR870

AGR870 / AGM500


VTS Handstop / Grip Position SupportDesigned to be used on either the side rail as a thumb support or on the bottom rail as a handstop, the VTS will provide better control for greater accuracy. The ergonomic shape and compact size enhance a natural relaxed grip. Built from MIL-SPEC reinforced polymer

Based on IDF Special Forces instinctive shooting method. The natural grip and optimal wrist angle provides a natural pointing grip on the weapon. Can be used with the VTS (below) Storage compartment in the grip. Mounting far forward on the rail will allow a forward grip beyond the end of the handguards on short carbines. Built from MIL-SPEC reinforced polymer.

Instinctive Pointing Foregrip

PTK Rubber Overmolded Combat Foregrip

FOREGRIPSShould I use one?

FOREGRIP ADVANTAGESForegrips offer a more natural hold on a weapon, resulting in less fatigue and the ability to fight longer. They place the hand in the same position every time, locking the shooter into a consistent stance. They give some shooters better control and faster, more positive movement of the weapon.

FOREGRIP DISADVANTAGESForegrips also add some weight to the weapon system. They can prevent the handguard from being placed close to an object on which the weapon is being rested. On certain firearms, such as AK rifles, the wrong foregrip may interfere with magazine changes.

WHAT IS RIGHT FOR ME?This is a question shooters must answer for themselves. We have seen two highly-trained soldiers from the same special ops unit with different preferences on running a foregrip. Don’t let someone else tell you that you are right or wrong in your choice to use a foregrip or not.

WHAT TYPE OF FOREGRIP IS BEST?This depends on personal preference, the type of weapon and the purpose of the weapon. Choose a foregrip that is suited for the weapon and that fits your preferences in size, angle and shape.

CAN I GET STABILITY WITH A FOREGRIP?Of course, but the key is in how it is used. We recom-mend a foregrip that is forward on the rail with the hand high on the foregrip and the thumb on the side of the handguard, not wrapped around the foregrip. Grips such as our FGG-S really lock the hand in place and several grips are angled or can be angled for the most comfortable, stable position for a particular shooter.

REG Comfortable textured overmolded rubber foregrip designed for the proper grip angle. No-slip design for use with or without gloves. Waterproof storage compartment. Built from MIL-SPEC reinforced polymer overmolded with durable rubber.

REG Rubber Overmolded Combat Foregrip

Modular textured overmolded rubber foregrip kit with side rail and pressure switch mount. No-slip design for use with or without gloves. Waterproof storage compartment. Adjustable height. Optional ambidextrous side-rail and adjustable pressure switch housing included. Built from MIL-SPEC reinforced polymer overmolded with durable rubber.

RSG Rubberized Stout Grip Kit

Rubberized Stout Grip

RSG

You can purchase a VTS & PTK combo package

#VTSPTKC


Tactical Vertical Grip

Quick Release I DF Vertical Foregrip

Israeli Special

Forces

TAL-4

Designed for US DEA. Compact foregrip gives secure grip with gloves, but is comfortable when used without gloves. Compact, light and strong.

Comfortable design with dual pressure switch housings. O-ring-sealed rattle-free storage compartment. MIL-SPEC reinforced polymer composite. Used by Israeli Special Forces.

Side-Folding Foregrip

T-FS

Stubby foregrip folds to either side to clear magazines on weapons such as AK rifles. Can also be used to keep support hand from being exposed when shooting from cover.

Thumb button allows grip to fold to any of seven angles from four o’clock to eight o’clock. Quick-release mount and waterproof storage. MIL-SPEC reinforced polymer composite. With Storage

Compact foregrip folds to seven different angles for use as an angled foregrip or to clear magazine.

Comfortable design. O-ring-sealed rattle-free storage compartment. MIL-SPEC reinforced polymer composite. QR version has quick-release mount.

TFL 7-Position Tactical Folding Grip

TFL-QR Quick Release TFL

Amazing compact foregrip locks your support hand in place on the weapon. Must be used to be appreciated. Perfect for pistols and short carbines.

Transforms from horizontal grip to vertical grip. From the horizontal position just push grip down to lock in vertical position. Press button to fold back. Safety extension prevents hand from slipping in front of muzzle when mounted on a handgun and locks hand in position on rifles. MIL-SPEC reinforced polymer composite. Issued to Israeli Special Forces.

AG44-S

Provides a natural fighting stance hold on your rifle. Grip is slightly angled to counter recoil. Improved performance in reaction time and muzzle control during close combat. MIL-SPEC reinforced polymer composite. Used by the IDF.

TFL-QR

TFL

FGG-K FGG-S

Pistols without external manual safeties may be carried safely using a foregrip designed to cover the trigger. Critical for carbine conversions. Extendable spring-retracting safety shield. Mounts to pistol rails for use with buttstocks such as the GLR-17/440. MIL-SPEC reinforced polymer composite.

If installed on a pistol, your pistol will become an Any Other Weapon. You must first register your pistol with the ATFE using ATFE Form 1.

Platform: Most Pistols with Rail

Foregrip Safety Systems for Pistol-Based Carbines

Folding Foregrip for Carbine or Pistol

TFL / TFL-QR Folding Vertical Grip

WITH QUICK RELEASE


Rounded Angled Foregrip with 1’’ or 1-1/8’’ Weapon Light Adapter

Israeli Special

Forces

MIK 1 / MIKI 1-1/8

The world’s most ergonomically designed foregrips allow the most comfortable fighting stance. This unique grip permits a higher, natural grip on the forearm. Most importantly, it fits perfectly in your hand. Holds any 1-1/8” or most 1” diameter lights. Tactical light is secured by quick release locking system that allows quick mounting or removal of the light, an advantage for rechargeable lights. MIL-SPEC reinforced polymer composite.

MIKI 1'' Rounded Foregrip with 1'' Light Adapter

MIKI 11/8'' Rounded Foregrip with 1-1/8'' Light Adapter

MIK 1

MIK 1-1/8

Tactical Folding Grips with 1'' or 1 1/8'' Tactical Light Adapter

FLASHLIGHT AVAILABLE SEPERATLY

FLASHLIGHT AVAILABLE SEPARATELY

FLASHLIGHT AVAILABLE SEPERATLY


FFA-T4 / FFGS-1

FFA-T4 is made for the Streamlight Stinger, Inova T4 or any 1 1/8'' diameter light. FFGS-1 is a more compact version designed for 1'' lights. Quick release light removal. Transforms from horizontal to vertical grip for different applications. When horizontal, push the grip open and it locks in the vertical position. Press button to fold back. Design locks the hand in for extremely secure grip. Excellent for very short carbines or submachine guns.

FFA-T4 Tactical Folding Grip with 1 1/8'' Light Adapter

FFGS-1 Tactical Folding Grip with 1'' Light Adapter

FFA-T4

FFGS-1

Enables carry of a spare magazine on the weapon, while serving as an ergonomic foregrip. Quick release with backup locking screw. Mag release button similar to the AR-15/M16 magazine release quickly releases spare magazine. Works as foregrip with or without magazine inserted.

Platform: M16 or AR15 Style Magazines

MG20 Forward Grip Magazine HolderMagazine Well Grip and

Magwell Funnel

MWG

The original Magwell grip. Converts the magazine well into a comfortable vertical grip for better control of the weapon. Allows a tight stance for speed and maneuverability. Prevents accuracy-decreasing pressure on non-free-float handguards. Keeps hand off the magazine. Includes flared and extended magwell to speed reloads. Serial number window shows weapon’s serial number. Fits MIL-SPEC M16, M4 and AR-15 lowers. Perfect for very short carbines or AR pistols. MIL-SPEC reinforced polymer.

Platform: M4, M16 or AR15

MG20

MWG


Tactical Foregrip with 1'' Weapon Light Adapter and Integrated On/Off Trigger

T-Grip / T-GripR

This unique tactical grip allows the shooter to mount a 1'' tactical light or laser with an on/off switch located in the grip itself, (no need for fragile, expensive pressure switches or wires). Safety switch prevents accidental activation of light.

Ergonomically designed vertical foregrip has storage compartment for batteries, cleaning kits, etc. T-GRIP has a front trigger activation switch. T-GripR features a rear activation switch. Fits Picatinny rails. Mounts with a quick release for instant safe use of the weapon. Additional locking screw for more permanent installation. MIL-SPEC reinforced polymer composite. Used by the IDF.

T-Grip Tactical Foregrip with 1'' Weapon Light

Adapter and Integrated On/Off Trigger Switch

T-GripR Tactical Foregrip with 1” Weapon Light Adapter and Integrated Rear Activation Switch

T-GripR

T-Grip

Shown with optional SpeedLight (not included) on page 41.


WEPERFORM

UNDER FIRE.JUST LIKE

YOU.

A SINGLE SOURCE FOR ALL YOUR LAW ENFORCEMENT NEEDS

WHEN SPLIT-SECOND DECISIONS MEAN THE DIFFERENCE BETWEEN LIFE AND DEATH, THE LAST THING YOU NEED IS TO WORRY ABOUT YOUR EQUIPMENT.

OUR PRODUCTS ARE BATTLE-TESTED AND USED BY THE ISRAELI DEFENSE FORCES, U.S. MILITARY AND FEDERAL AGENCIES IN THE MOST CHALLENGING CONDITIONS IN THE WORLD.

MAKO OFFERS SUPERIOR GEAR – MEPROLIGHT® OPTICS & NIGHT SIGHTS, FRONT LINE HOLSTERS AND FAB DEFENSE ACCESSORIES–

THAT YOU CAN DEPEND ON, TIME AND TIME AGAIN.


Foregrip Bipod with 100 Lumen LED Light

Tactical Foregrip with Precision Bipod

T-Pod / T-PodQR

Fully functional precision bipod built into a vertical foregrip. Built for designated marksmen operating in urban settings who need to transition from close fighting to precision shooting. Issued to Israeli Special Forces and many US military units.

Ergonomic foregrip based on our popular TAL-4 grip. A touch of a button transforms the grip into a sturdy bipod. Legs are independently adjustable for height. Bipod allows slight pivot to adjust cant. Wide stance offers stability lacking in other grip bipod designs. Dual pressure switch cavities. Mounts with quick release button or additional locking screw. T-PodQR mounts with captive quick-release wingnuts.

T-Pod Tactical Foregrip with Precision Bipod

T-PodQR T-POD with Quick-Release Mount

Combines a precision bipod, foregrip and 100 lumen tactical light in one device. Built for designated marksmen operating in urban settings who need to transition from close fighting to precision shooting. With a built-in 100 lumen tactical weapon light, the T-PodSL vertical foregrip combines three essential accessories in one compact, lightweight unit. Integrating the foregrip, bipod and weapon light streamlines your weapon and saves valuable rail space.

BIPODS AND BIPOD MOUNTSStability for precision shooting.

SHOOTING WITH A BIPODAs both military and civilian weapons become more modular, many shooters are using bipods for the first time. This has led to confusion for new bipod users and complaints about bipod design from inexperienced users. Most skilled precision shooters don’t hold a foregrip or handguard when shooting from a bipod, usually holding the stock with the support hand or occasionally one of the bipod feet. If you are learning precision shooting techniques, we recommend contacting an experienced precision shooter for advice.

FOREGRIP BIPODSForegrip bipods are designed for CQB fighting. Unlike other foregrip bipods, designed to give SAW gunners a foregrip/bipod combo, FAB T-PODs were designed as precision bipods for designated marksmen. While they will work fine for a SAW, they are best used for precision/CQB work on a rifle or carbine.

COUNTERFEIT WARNINGSeveral companies are now manufacturing counterfeit copies of T-PODs. Many include the FAB logo, T-POD branding and are marked “Made in Israel.” The counterfeits are poorly made from substandard materials and many do not work even when new. If they do work, they soon fail. The design of the T-POD requires very specific, expensive polymer materials and the best quality aluminum. This design cannot function when made from inferior materials. Buy only from reputable dealers to ensure that you receive a genuine T-POD.

Foregrip Bipod with 1'' Light Mount

T-PodFA

Combines a precision bipod, foregrip, and light mount in one device. Built for designated marksmen operating in urban settings who need to transition from close fighting to precision shooting

The T-PodFA integrates a foregrip, bipod, and button-activated light mount for most 1'' lights with tailcap switches. Quick-release mount.

T-PodQRFeatures quick release

T-PodSL



Tactical Foregrip Bipod with 378 Lumen LED Light

T-PODG2 SL

Integrating a foregrip, bipod and tactical light, the T-PODG2 SL combines three essential accessories in one compact and lightweight unit. Streamlines your weapon and saves valuable rail space. Designed for optimal transition from close range combat to precision shooting.

Transforms into a sturdy bipod with the push of a button. Leg height is independently adjustable. Bipod allows slight pivot for optimal accuracy. Wide- angle leg deployment provides rapid stability, enhancing combat positioning. Aviation-grade aluminum, steel and reinforced polymer composite construction.

Foregrip Bipod with 1'' Light MountCombines a precision bipod, foregrip and light mount in one device. Built for designated marksmen operating in urban settings who need to transition from close fighting to precision shooting.

The T-PodFA integrates a foregrip, bipod and button-activated light mount for most 1'' lights with tailcap switches. Quick-release mount.

The only fully functional bipods designed for precision shooting built into vertical foregrips. Built for designated marksmen operating in urban settings who need to transition from close fighting to precision shooting. Issued to Israeli Special Forces and many US military units.

Gen 2 T-Pod with spring-loaded rotation feature an adjustable pressure switch mount. Bipod allows weapon to rotate approximately 45º left or right of center to switch targets or track moving targets. Quick-release mount. Built from a unique high-tech polymer for outstanding strength.

T-PODs are built by FAB Defense in

Israel to MIL-SPEC standards.

T-PodG2 PR Rotating/ Swiveling

Foregrip Bipod

T-PodG2FA

Israeli Special

Forces

Tactical Foregrip Bipod – Quick-Release

Fully functional precision bipod built into a vertical foregrip. Built for designated marksmen operating in urban settings who need to transition from close fighting to precision shooting. Issued to Israeli Special Forces and many US military units.

Second generation T-POD with improved operation. Single thumb button releases legs. Closing halves and pressing legs up returns T-POD G2 to grip configuration. More compact than first generation T-PODs with a look that matches our AG-43 Pistol Grip and other accessories. Slight pivot adjusts cant. Quick-release mounting system. Built from a unique high-tech polymer for outstanding strength.

T-PodG2 QR


LIGHTS & LIGHT MOUNTSBe sure of your target.

CHOOSING A TACTICAL LIGHTTactical lights are valuable for identifying targets and disorienting threats. A tactical light should be compact and durable with a substantial battery life. The beam should be bright enough to illuminate a target or blind a threat, but does not need to be excessively bright. The beam should also be narrow and focused to avoid brightly illuminating walls and door frames and distracting the shooter, while still scattering enough softer light to the sides to illuminate a room.

Lights and mounts are built by FAB Defense in Israel for use by the IDF.

For sling swivel–mounted bipods

Bipod Adaptors

Transform sling swivel-mounted bipods into rail or bayonet lug-mounted accessories. Works with bipods designed to attach to sling swivels.

H-POD Mounts to a rail and allows a mounted bipod to pivot and rotate. Black, OD or FDE.

HABA attaches to a rail via a quick release mount, turning a bipod into a QR accessory. Great for switching between bipods of different heights.

HBA Lightweight sturdy adaptor for mounting bipods on Picatinny rails.

M4 BHA bipod adaptor mounts to M16/M4/AR-15 bayonet lug. Transforms bayonet lug into a bipod mount.

MIL-SPEC reinforced polymer composite.

H-POD Harris Bipod Pivoting and Rotating Adapter

HABA Harris Bipod Quick Release Picatinny Adapter

HBA Harris Bipod Picatinny Adapter

M4 BHA Harris Bipod M16/AR-15 Bayonet lug Mount

H-POD

HABA

M4 BHA

HBA

The TAR Podium is a quick deployment bipod for TAR 21 rifles. Compact sleek design, which replaces the grip bottom cap and is secured with a single screw. Made of light, durable quality

TAR PODIUM

NEW FROM FAB DEFENSE FOR TAVOR RIFLES

reinforced polymer composite, the bipod is activated with a push of a single button, providing the shooter a stable platform from which to shoot. Available in black, olive drab green or desert tan.


PLR 378 lumens of white light illumination from a single CR123A lithium 3V battery. LED technology means no broken bulbs and over an hour of continuous illumination from one battery. Light housing is built from aerospace aluminum, hard anodized to military specifications. Push button activation. Momentary or constant illumination. Gen 2. Available with pressure switch. Compact, light and rugged. 1'' diameter.

SpeedLight G2 378 Lumen LED Tactical Weapon Light

SpeedLight-PS G2 SpeedLight with Pressure Switch

SpeedLight6V G2 590 Lumen, 6 Volt LED Tactical Weapon Light

SpeedLight Magna SpeedLight w/Magnetic Base

PR-3 G2 SpeedLight with built-in Picatinny mount

SpeedLight G2

SpeedLight6V G2

PR-3 G2

SpeedLight Magna

100 Lumen 1'' Tactical LED Light

SpeedLight G2

Lights

SD30

SD34

SD30 & SD34

Superior quality scope mounts for 30mm and 34mm scopes. Designed to be the toughest quick-release mount available on the market. Can be mounted, then torqued, while retaining quick-release capability at the preferred torque setting.

Durable two-bolt side-locking system ensures extremely tight and secure mount of the scope. Full-length steel clamp and cross-bolts. Milled From 6061 Aluminum Billet. Matte Black Hard Coat Anodized.

SD30 30mm Integral Scope Mount

SD34 34mm Integral Scope Mount

Platform: MIL-STD-1913 Rails

Mount for 30mm and 34mm Scopes

Optic Mounts

Tactical Light Mounts

PLA / PLS

Efficient and easy to attach with quick release mechanism. Beveled-lip design for easy light insertion. Designed for easy activation of the mounted device. MIL-SPEC reinforced polymer composite.

PLA 3/4 3/4'' Laser and Tactical Light Adapter

PLA 1 1'' Tactical Light/Laser Adapter

PLA 11/8 11/8'' Tactical Light Adapter

PLS1 1'' Tactical Light Offset Side Mount

PLS

PLA 11/8

PLA 3/4

PLA 1

Adjustable Light Mount

Folds side to side for 180 degrees of adjustment to position light exactly where needed. Holds 1'' tactical lights. MIL-SPEC reinforced polymer composite. Ten-position push-button adjustment. Mounts on top, side or bottom rail and adjusts to fine-tune light position.

PLR

Light Mounts


SIG551-SM G3-SM

Provides versatility for mounting optics on SIG rifles. MIL-STD 1913 rails. Manufactured with solid aviation grade 6061 T6 aluminum.

Platform: SIG 551

SIG 551 Aluminum Optic Mount G3 Aluminum Scope Mount

Provides versatility for mounting optics to HK G3 rifles. MIL-STD 1913 rails. Manufactured with solid aviation grade 6061 T6 aluminum.

Platform: H&K G3

Dragunov SVD Sniper Scope Mount

SVDM

Rugged military-grade Picatinny rail precision scope mount for Dragunov SVD and similar rifles. Mounts solidly to side rail on rifle’s receiver. Solid, precision construction. Machined from aircraft-grade aluminum and steel.

Platform: Dragunov, PSL, and Similar Rifles

HK Aluminum Scope Mount

MP5-SM

Provides additional versatility for mounting optics on MP5. Easy and tight attachment. Unique clamps provide stability. MIL-STD 1913 rail. Manufactured with solid aviation grade 6061 T6 aluminum. No gunsmithing required.

Platform: MP5 and Clones

SBS

Provides two Picatinny rails for mounting tactical lasers or lights to bayonet lug. Anodized aviation-grade aluminum.

Platform: M4, M16 or AR15 Bayonet Lug

Dual Picatinny Rail for M16/M4/AR-15 Bayonet Lug Mount

Bayonet Lug Mounts: M16/AR15

Dragunov HK

SIG

Israeli Special

Forces

TPM

Low profile quick-release mount for the Trijicon ACOG. Mount can be torqued to desired pressure for consistency when using the quick-release feature.

Secured by full-length steel clamp and cross-bolts and two steel levers. Standard ACOG Channel. Locking Mechanism can be adjusted to fit out-of-spec or damaged rails as well as fitting in-spec rails. Quick-release mechanism maintains zero. Milled from 6061 T6 aluminum. Locking mechanism is milled from 4130 carbon steel.

Platform: ACOG/MIL-STD-1913 Rail

Quick-Release Base for Trijicon ACOG


The essential bayonet lug attachment. Designed to securely hold tactical lights or lasers, Fits 3/4'' and 1'' diameter lights and lasers. Secure bolt locking system for the mounted device. Tight fit of adapter ensures the stability and accuracy of all laser and optical devices. Precision machined from aviation-grade anodized aluminum stock. Durable and lightweight construction. Easily mounts and dismounts. Secured to the bayonet lug with Allen bolts. No modification to the weapon or gunsmithing required.

FBA-UZI UZI Bayonet Lug Mount for 1'' Light

FBL-UZI UZI Bayonet Lug Mount for 3/4'' Light

Platform: Uzi and Clones

The perfect bayonet lug attachment. Designed to securely hold tactical lights or lasers, Fits 3/4'' and 1'' diameter lights and lasers. Secure bolt locking system for the mounted device. Tight fit of adapter ensures the stability and accuracy of all laser and optical devices. Precision machined from aviation-grade anodized aluminum stock. Durable and lightweight construction. Easily mounts and dismounts. Secured to the bayonet lug with Allen bolts. No modification to the weapon or gunsmithing required.


Bayonet Lug Mount for 3/4'' and 1'' Tactical Lights or Lasers


FBA-UZI / FBL-UZI FBA-58

UZI VZ.58

The perfect bayonet lug attachment. Designed to securely hold tactical lights or lasers, Fits 3/4'' and 1'' diameter lights and lasers. Secure bolt locking system for the mounted device. Tight fit of adapter ensures the stability and accuracy of all laser and optical devices. Precision machined from aviation-grade anodized aluminum stock. Durable and lightweight construction. Easily mounts and dismounts. Secured to the bayonet lug with Allen bolts. No modification to the weapon or gunsmithing required.

FBA AR-15/M4 Bayonet Lug Mount for 1'' Light

FBL AR-15/M4 Bayonet Lug Mount for 3/4'' Light



FBA / FBL


If you own a host pistol and buy this product, your pistol will become a short-barreled rifle. You must first register your pistol with the ATFE using ATFE Form 1.

KPOS

KPOS G2 Transport BAG

Convert pistols to compact PDW weapons. Increases effectiveness of pistols in a concealable package smaller than a Micro Uzi.

Mounts to front and back of pistol frame. Includes charging handle, single-point sling, folding stock with rubber buttpad and FGG-KPOS Safety Foregrip. Drop-in installation. Allows use of original iron sights. Designed for use with or without suppressor. Rugged aluminum and steel construction. Works with ported pistols. Perfect for discrete security operatives.

KPOS17 Glock® to Carbine (PDW) Conversion Kit

Platform: Glock® 17, 19, 22, 23, 31, 32, 35

KPOS18 Glock® 18 to Submachine Gun Conversion

Platform: Glock® 18 Machine Pistol

KPOS21 Glock® to Carbine (PDW) Conversion Kit

Platform: Glock® 20, 21

KPOS226 SIG to Carbine (PDW) Conversion Kit

Platform: SIG 226

KPOS2022 SIG to Carbine (PDW) Conversion Kit

Platform: SIG 2022 (SIG Pro)

BUILDING ON PROVEN RELIABILITYAll dressed up for a night on the town but the point is to remain unseen. Sure, these pistol conversions have killer looks, but their purpose is to protect lives. Concealed under a windbreaker or suit jacket, the ultra-reliable micro carbine offers the serious executive security professional stability, accuracy and sighting options unmatched by any pistol.

THE NEEDSecurity professionals and certain LE units need compact carbines (with better practical range and accuracy than a pistol) that can be concealed under a light jacket or suit jacket.

THE PROBLEMVery few weapons fit this specialized role. Micro Uzis are used extensively, but other similar-sized designs lack reliability or are spectacularly expensive. A totally new weapon system requires years of testing and improvement to produce a reliable weapon. Most pistol-to-carbine conversion systems are so large that they are no more concealable than a short M4 (lacking the better terminal ballistics of the M4), thus negating any value. In addition, most conversion systems have reliability issues, including brass deflectors that cause jams and a tendency to build up carbon in the front of the slide/barrel area that causes malfunctions.

THE SOLUTIONThe KPOS system is designed for serious use. It is not much larger than the pistol itself and the entire package fits in a pistol case. More compact than a Micro Uzi, it solves design, cost and training issues of a new weapon by building on the already familiar, reliable designs of the host pistols.

Pistol to Carbine (PDW) Conversion

Pistol to Carbine Conversion

KPOSG2

Convert pistols to compact PDW weapons. Increases effectiveness of pistols in a concealable package smaller than a Micro Uzi.

Similar to original KPOS, but fits larger frame pistols such as the FN Five-seveN. Sealed system prevents gas blow-back when using non-factory ported barrels or muzzle brakes. AR-15-style charging handle requires no alteration or assembly of parts to host pistol. Includes single-point sling, folding stock with rubber buttpad, and FGG-KPOS Safety Foregrip. Drop-in installation. Does not allow use of original iron sights. Designed for use with or without suppressor. Rugged aluminum and steel construction. Works with ported pistols and aftermarket brakes. Perfect for discrete security operatives.

A lightweight nylon bag, complete with a carry sling, three velcro straps and two removable velcro transport small boxes.

Visible business card panel on the outside. A full MOLLE compatible carry system.

Transport Bag only, no weapon included.

KPOSG2 Gen2 Glock® to Carbine (PDW) Conversion KitPlatform: Glock® 17, 18, 19, 22, 23, 25, 31, 32, 34, 35, 37, 38

KPOSG2-21 Glock® to Carbine (PDW) Conversion Kit Platform: Glock® 20, 21, 21SF, 29, 30

KPOSG2-57 FN 5.7 to Carbine (PDW) Conversion KitPlatform: FN Five-seveN

KPOSG2-226 SIG to Carbine (PDW) Conversion KitPlatform: SIG 226, SIG 220

KPOSG2-2022 SIG to Carbine (PDW) Conversion KitPlatform: SIG 2022 (SIG Pro)

KPOSG2-PX4 PX4 to Carbine (PDW) Conversion KitPlatform: Baretta PX4

KPOSG2-XD XD to Carbine (PDW) Conversion KitPlatform: Springfield XD, HS 2000

KPOSG2-J941PL Jericho to Carbine (PDW) Conversion KitPlatform: Polymer Frame Jericho

KPOSG2-J941F Jericho to Carbine (PDW) Conversion KitPlatform: Steel Frame Jericho

KPOSG2-CZ CZ to Carbine (PDW) Conversion KitPlatform: CZ P07 Duty

Optics, lights and iron sights not included.

Pistol to Carbine (PDW) Conversion

Pistol to Carbine Conversion


KPOSG2-M4 M4-Style Glock® to Carbine (PDW) Conversion Kit Platform: Glock® 17, 18, 19, 22, 23, 25, 31, 32, 34, 35, 37, 38

KPOSG2 2022-M4 SIG to Carbine (PDW) Conversion Kit with GLR16 StockPlatform: SIG 2022 (SIG Pro)

KPOSG2 226-M4 SIG to Carbine (PDW) Conversion Kit with GLR16 StockPlatform: SIG 226

KPOSG2 CZ-M4 CZ to Carbine (PDW) Conversion Kit with GLR16 StockPlatform: CZ P07 Duty

KPOSG2 J941F-M4 Jericho to Carbine (PDW) Conversion Kit with GLR16 StockPlatform: Steel Frame Jericho

KPOSG2 J941-M4 Jericho to Carbine (PDW) Conversion Kit with GLR16 StockPlatform: Steel Frame Jericho without Picatinny rail

KPOSG2 J941PL-M4 Jericho to Carbine (PDW) Conversion Kit with GLR16 StockPlatform: Polymer Frame Jericho

KPOSG2 PX4-M4 PX4 to Carbine (PDW) Conversion Kit with GLR16 StockPlatform: Baretta PX4

KPOSG2 XD-M4 XD to Carbine (PDW) Conversion Kit with GLR16 StockPlatform: Springfield XD, HS 2000

KPOSG2-21-M4 Glock® to Carbine (PDW) Conversion Kit with GLR16 StockPlatform: Glock 20, 21

KPOSG2-57-M4 FN 5.7 to Carbine (PDW) Conversion Kit with GLR16 StockPlatform: FN Five-seven

KPOSG2 Delta

KPOSG2-D Glock 9mm to PDW Conversion GEN 2 Delta stock (R/FBS included)

KPOSG2-D21 Glock 21 to PDW Conversion GEN 2 Delta stock (R/FBS included)

KPOSG2-D57 FN 5.7 to PDW Conversion GEN 2 Delta stock (R/FBS included)

KPOSG2-DJ941F Jericho 941 F/ FS/ R to PDW Conversion GEN 2 Delta stock (R/FBS included)

KPOSG2-DJ941 Jericho 941 (No Rail) to PDW Conversion GEN 2 Delta stock (R/FBS included)

KPOSG2-DJ941PL JerichoPL / PSL to PDW Conversion GEN 2 Delta stock (R/FBS included)

KPOSG2-D226 SIG 226 to PDW Conversion GEN 2 Delta stock (R/FBS included)

KPOSG2-D2022 SIG 2022 to PDW Conversion GEN 2 Delta stock (R/FBS included)

KPOSG2-DUTY CZ DUTY to PDW Conversion GEN 2 Delta stock (R/FBS included)

KPOSG2-DXD XD to PDW Conversion GEN 2 Delta stock (R/FBS included)

KPOSG2-DPX4 Baretta PX-4 to PDW Conversion GEN 2 Delta stock (R/FBS included)

Pistol to Carbine (PDW) Conversion with Folding Tube

Shown KPOS and other Upgrades and Stock Replacements

KPOSG2 with Folding UAS Stock

KPOSG2 with Folding and Collapsible GLR16 Stock

The non-NFA version of the popular KPOS G2 PDW Conversion Kits, the Pathfinder uses a folding stabilization tube instead of a stock. This design provides shooters with the benefits of the KPOS system without the restrictions of short-barreled rifle laws. No SBR tax stamp is required.

6061 T6 billet-hard anodized aluminum frame construction. Includes rear/front folding backup sights and versatile tactical support. Built-in AR15-style charging handle. Removable flash hider allows suppressor use. Requires no modification to pistol. Smallest and lightest frame (folded or open) compared to any alternative.

KPOSG2P KPOS G2 Pathfinder for Glock® Pistols

KPOSG2-21PKPOS G2 Pathfinder for Glock® 20 & 21

KPOSG2-57 P KPOS G2 Pathfinder for FN Five seveN

KPOSG2-226P KPOS G2 Pathfinder for SIG P226

KPOSG2-2022P KPOS G2 Pathfinder for SIG Pro (2022)

KPOSG2-PX4P KPOS G2 Pathfinder for Baretta PX4

KPOSG2-XDP POS G2 Pathfinder for Springfield XD & XDM

KPOSG2-J941FP KPOS G2 Pathfinder for Steel Jericho-F

KPOSG2-J941PLP KPOS G2 Pathfinder for Polymer Jericho

KPOSG2-CZP KPOS G2 Pathfinder for CZ Duty

KPOS G2 Pathfinder

Includes folding sights and VTS handstop.

G2 CCP Upgrade: The G2 CCP Buttstock Upgrade replaces the original KPOS G2 stock with a M4 style collapsible and side folding stock. With an adjustable cheek piece for optimal use of optics.Right folding stock by default.

G2 C Upgrade: The G2C Buttstock Upgrade replaces the original KPOS G2 stock with a M4 style collapsible and side folding stock. Right folding stock by default.

G2 D Upgrade: The G2D Buttstock Upgrade replaces the original KPOS G2 stock and features a slim side folding stock with built in cheek rest with 5 height levels for optimal use with optics. Right folding stock by default.

ARS Upgrade: Folding Collapsible Stock Systems for use with Riot Control Visor/Helmets

G21 Upgrade: KPOS Adaptor plate for mounting G21

TS Upgrade: KPOS Tactical Stock for use with riot helmet /visor

KPOS Upgrades

G2CCP Upgrade

G2C Upgrade

G2D Upgrade

KPOSG2-M4


RBS / FBS

Every weapon with an optical sight should have an auxiliary sighting system. If your optic depends on batteries, auxiliary sights are an absolute necessity.

Designed for M4, M16 and AR-15 rifles, the KPOS system and other weapons with same-plane mounting locations and similar sight height.

• Rear sight is finger-adjustable for windage; front sight is finger-adjustable for elevation

• Low-profile, lightweight design

• May be used as primary or secondary sights

• Ambidextrous deployment and control

• High-grade polymer and metal construction

• Spring-based locking mechanism will not break or deform

• Mounts to MIL-STD-1913 Picatinny rails

• Front sight height designed for mounting to handguard on same plane as rear sight, not to AR-15 gas blocks

• Front sight weight: .88 oz.

• Rear sight weight: 1 oz.

FBS Front Folding Backup Sight

RBS Rear Folding Backup Sight

FRBS Folding Backup Sight Set

Platform: M4/M16/AR-15 and similar rifles.

Folding Back-Up Sights

Sights

Magazines & AccessoriesFeed your weapon.

MAGAZINE COUPLERSThe crucial part of most fights is over within seconds. Initial contact requires a fast expenditure of many rounds. When the first two magazines are coupled, 60-rounds of ammunition are available with a super-fast reload to establish fire superiority. For patrol rifles or home defense weapons, coupled magazines increase the available firepower when additional magazines cannot easily be carried.

PADDLE BELT POUCHESA paddle belt pouch puts one or several magazines on the belt in an instant. They are ideal when you need to grab a rifle and go and are perfect for patrol rifles or plain clothes officers. Just grab the rifle, slide the pouches onto the belt and you are ready. They are also excellent for home defense situations.

MAGAZINE CARRIERSThere is nothing worse than grabbing a weapon in a hurry and finding that you can’t locate ammunition. Magazine carriers attach a loaded magazine to the weapon, keeping the action clean and saving you from digging in the case, safe or patrol car trunk for ammunition.

The Smart Load is designed to allow for rapid loading and unloading of the mag. No more tired or bruised fingers from loading and unloading multiple mags.

AVAILABLE WITH TRITIUM on page 8

REVOLUTIONARY LOADING SYSTEM BY FAB DEFENSE

ULTIMAG SMART LOAD

1 Pull

3 Push 4 Done2 Pour

NEW!


Durable, lightweight 30-round AR-15 magazine. Durable polymer and steel construction. Anti-tilt follower. Easy-to-grip shape. Can be disassembled without tools. Floorplate is designed to interface with magazine couplers. Specially shaped spring fills magazine body from front to back for better reliability.

Platform: M16, M4, AR-15

Polymer 30-Round Magazine for AR-15

ULTIMAG R30

Durable, lightweight 10-round AR-15 magazine.Durable polymer and steel construction. Anti-tilt follower. Easy-to-grip shape. Can be disassembled without tools. Floorplate is designed to interface with magazine couplers. Specially shaped spring fills magazine body from front to back for better reliability. Legal in all 50 states.

Platform: M16, M4, AR-15

ULTIMAG R10Polymer 10-Round Magazine for AR-15

ULTIMAG AK Magazine

Durable, lightweight, 30 round AK magazine.Tough, durable polymer and stainless steel construc-tion. Easy to grip, banana style shape. Can be dis-assembled without tools. Proprietary shaped spring fills magazine body from front to rear for greater reliability. Not legal in state with magazine capacity restrictions.

Platform: 7.62x39mm AK Rifles

ULTIMAG AKR30

Durable, lightweight 10-round AK magazine.Durable polymer and steel construction. Easy-to-grip shape. Can be disassembled without tools. Specially shaped spring fills magazine body from front to back for better reliability. Legal in all 50 states.

Platform: 7.62x39mm AK Rifles

ULTIMAG AKR10Polymer 10-Round Magazine for 7.62x39 AK rifles


Carriers

Pentagon 10-Round Ultimag Magazine Coupler for 5 MagazinesCouples five 10-round AR-15 Ultimag magazines together. Allows the carry of 50 rounds in the rifle in states that restrict standard capacity magazines. Excellent for self-defense and training.

Durable polymer and steel construction. Interfaces with the AR-15 Ultimag floor plates. Easy installation and removal of magazines. Amazingly quick reloads.

PMC KIT includes PMC and five AR-15 ULTIMAG R10 magazines.

Platform: AR-15 Rifles

PMC / PMC KIT Comfortable mag pouch for M16/AR-15-type magazines. Great for grab and go, undercover, or any other situation in which a magazine slipped onto the belt is an advantage. Holds magazines securely. MIL-SPEC reinforced polymer.

Platform: M16, M4, AR-15 Magazines

Paddle Magazine Belt Pouch

556 Pouch

Israeli Special

Forces

Horizontal Magazine Carrier

For those who carry a magazine ready with an unloaded rifle. Insert upper part into magazine well to carry loaded magazine horizontally under weapon for instant use. Release, turn mag 90 degrees and reinsert to load weapon. Keeps dust and debris out of action. Keeps magazine with weapon in case or patrol car.


MH 5.56 Tactical Magazine Carrier

Keeps loaded mag close to weapon for instant loading. Carries loaded magazine vertically beside the magazine well of unloaded weapon. Fits into the magazine well and keeps the weapon clean and safe.


MTH

Couples two 10-round AR-15 Ultimag magazines together. Allows the carry of 20 rounds in the rifle in states that restrict standard capacity magazines. Excellent for self-defense and training. Durable polymer and steel construction. Interfaces with the AR-15 Ultimag floor plates. Easy installation and removal of magazines. Instant reloads.

OMC KIT includes OMC and two AR-15 ULTIMAG R10 magazines.

Platform: AR-15 Rifles

OMC / OMC KITDual 10-Round AR-15


Couplers

Polymer Magazine Couplers Universal Cordura Magazine Couplers

Modular Magazine Coupler

MCE

Durable and lightweight. Fits most 5.56mm and 7.62x39mm magazines. Minimalist design does not interfere with pouches (all mechanical parts are located between the magazines).


Set of two quick-attach couplers holds two magazines. Improves reload speed. MIL-SPEC reinforced polymer and steel.

TZ-2 Polymer Magazine Couplers for AR15

Platform: M16/M4 and many AK Magazines

TZ-5 MP5 Polymer Magazine Couplers

Platform: MP5 Magazines

TZ-M9 9mm UZI Magazine Couplers

Platform: UZI 9mm Magazines

TZ-2 / TZ-5 / TZ-M9

Couples magazines for fast initial reloads. Magazines are spaced and staggered perfectly for proper function, and cannot change position. Fits M16 magazines. MIL-SPEC reinforced polymer.


TZ-M4

DISCOVER COURAGEDiscover Courage is an organization that works to help veterans from special

operations units mend issues brought on by PTSD. Special Ops veterans face unique challenges in coping with PTSD due to the classified nature of their service.

HAVAHAVA– Honored American Veteran’s Afield–is an organization created within

the shooting industry to help American veterans through family-friendly shooting-oriented events in addition to aiding in the pressures of dealing with PTSD.

NRA PREMIER INDUSTRY ALLYThe Mako Group is dedicated to growing NRA membership and supporting the

resolute belief in the 2nd Amendment rights of all Americans.

THE MAKO GROUP PARTNERSThe Mako Group works closely with leading industry organizations

to strengthen the shooting community.


Slings

Israeli Special

ForcesThese slings and mounts are built in Israel for the IDF by FAB Defense.

Bungee Sling: Single-point sling with bungee section for comfort and movement. Steel snap clip and bungee section are shrouded by webbing. Adjustable size. Quick-release buckle allows sling to be removed without taking it over the head, useful when worn under a jacket.

SL-1: May be attached to a single sling swivel or to two swivels. Great for CQB. Provides a comfortable, steady weapon support and prevents fatigue. Transitions instantly between

single-point, two-point and three-point mode. Durable tight-weave webbing resists fraying and snagging and is wide and comfortable. Built-in ear plug storage pouch.

SL-2: Tactical CQB Sling that transitions instantly from a three-point sling to a single-point sling. May be used as a three-point sling for better support and to allow hands-free carry when necessary. A quick-release mechanism instantly transforms the sling to single-point mode for

better maneuverability in close quarters and for use in vehicles. Durable, wide and comfortable tight-weave webbing resists fraying and snagging. Built-in ear plug storage pouch.

Bungee Sling Tactical Single-Point Sling – Black

SL-1 3 Point/ 2 Point/ 1 Point Tactical Weapon Sling – Black or OD

SL-2 3-point/Single-Point CQB Sling – Black

SLINGS & MOUNTSIDF combat slings in three styles.

SINGLE-POINT SLINGThe single-point sling is the most flexible for CQB combat. It does not hold the weapon as tight to the body as a three-point sling, but allows greater maneuverability of the weapon. It is preferred by many who are working in and out of vehicles and need the greatest flexibility and speed. When moving with a single-point sling, at least one hand generally needs to be on the weapon.

TWO-POINT SLINGTwo-point slings are the traditional style of sling, originally intended to be attached to the front and rear of the weapon. Like the single-point sling, they are very simple to use. Our two-point sling, the SL-1, can be used as a traditional two-point sling, attached at the stock and rear of the handguard or with both ends attached to a single point for use like a single-point sling. It is also designed so that it can function as a three-point sling if desired.

THREE-POINT SLINGThree-point slings are the most secure style, holding the weapon close against the chest. When a three-point sling is used, the weapon can hang hands-free while the shooter is moving and working with both hands. The three-point sling is also the least flexible when entering or exiting vehicles, or if the weapon needs to be used to strike the enemy in hand-to-hand combat. Our SL-2 three-point sling is designed to transition instantly to a single-point sling to overcome this issue.

EAR PLUG POUCHESAll SL-1 and SL-2 slings have a built-in earplug pouch to ensure that earplugs are always kept with the weapon.

Bungee Sling / SL-1 / SL-2 Snap-on Skin for Glock® Pistol Slides

Bungee Sling

SL-1

SL-2


Picatinny Sling Attachment PointSLA

Attachment point for any sling up to 1'' wide for Picatinny rails. Smooth, rounded edges to protect sling webbing. Type II Class 3 Hard Black Anodized 6061 Aircraft Grade Aluminum.

SLS Quick Detach Sling Swivel

Fits standard quick release sling swivel sockets, such as the QR sling points on FAB stocks and rail systems. Hard coat anodized steel construction, quick release button is recessed to avoid accidental release. Blued Steel.

Provides a Picatinny mounting platform for your tactical sling. Incorporates the durable SLS QD Sling Swivel complimented with a versatile Picatinny attachment allows ambidextrous use mounts to any 1913 MIL-STD Picatinny rail hard black anodize, ultra-light weight easy to install with one locking bolt.

1-Point Sling Adapter End Plate

Ambidextrous single-point sling mount replaces stock end plate. Low profile and clears grips with beavertail extensions. Phosphated Steel.

Platform: M4, AR-15 Carbines

TSA

PSA Picatinny Sling Attachment

Israeli Special

Forces

OEM, WHEN IT COMES TO YOURNEEDS THERE IS NO GRAY AREA.[ ]

The Mako Group, the sole U.S. distributor of a comprehensive array of superior tactical equipment and weapons accessories is an invaluable resource for OEMs. Working closely with our Israeli factory partners, we can fulfill your custom accessory orders without size restriction, thus reducing cost concerns for smaller runs.


Positive Weapon Safety for Training

9mm Barrel Blocker

Polymer Muzzle Break Cover

When inserted into the chamber from the rear, the rod blocks the chamber and barrel so a live round cannot be chambered. Brightly colored for high visibility. Ideal for safety during classroom or range instruction, storage or transportation. For 5.56mm, 7.62x39mm, 9mm, and .22 rifles, carbines and pistols.

AR-Rod13 13'' Safety Rod for .223/5.56mm (M4/AR-15) [pkg. of 10]



AK-Rod 21'' Safety Rod for 7.62x39mm (AK-47) [pkg. of 10]

MP-Rod Safety Rod for MP5 [pkg. of 10]

PS-Rod22 Safety Rod for .22 pistols [pkg. of 10]

PS-Rod9 Safety Rod for 9mm pistols [pkg. of 10]

PDA 9 Polymer Dummy Ammo

For use as a training device to demonstrate or test the function of a pistol, or to replicate malfunctions in training. Bright red polymer dummy rounds cannot be mistaken for live cartridges and are not easily damaged like metallic dummy cartridges often are.

Bright red polymer and brass safety device blocks barrel and chamber and clearly flags chamber as unloaded. Ideal in areas where a chamber blocking device is considered a lock, or where pistols are required to be carried unchambered but still ready for action. Charging the pistol ejects the barrel blocker. Brass head allows positive extraction and long life.

To insert barrel blocker, clear pistol, open slide, and slide barrel blocker up under extractor. Slowly allow slide to close. To remove, charge pistol. A loaded magazine can be carried in the pistol under the barrel blocker.

Durable polymer cover for M4/M16 flash hiders keeps dirt, water, ice and snow out of bore Blows off prior to bullet exiting bore.

Platform M16/M4/AR-15

Safety Rods

TS-BB

MC-556

SAFETY, SELF-DEFENSE AND ACCESSORIES

Hybrid Polymer/Steel Expandable Baton

BU-C

Ideal product for law enforcement and military training exercises. Integrates perfectly with the Multiple Integrated Laser Engagement System (MILES 2000) used extensively by the U.S. military for ground combat training.

Attaches 5.56mm weapons using M16/M4-type flash hiders. Functions as both blank firing adapter and bullet-stopping safety device. If live rounds are loaded and fired, the BUC will stop bullets at the muzzle. After the first live round is fired from a semi-automatic or fully automatic weapon, increased pressure usually causes a failure to extract, effectively halting further cycling of the weapon until remedial action is taken, preventing the chambering of a second live round.

Platform: M4, M16 or AR15, SAW, etc.

Safety

TS-BB

PDA 9

MC-556

The PDA 5.56 dummy ammo allows dry fire practice.The exact 5.56 replica is made out of bright red poly-mer in order to distinguish from regular rounds. En-ables more realistic training-mag changes, malfunc-tions, stoppages, charging and ejection scenarios.

PDA 556

PDA 556


Multi-purpose Polymer Pliers for Forensics/EOD/HAZMATThe G-Clamp keeps your hand away from danger, while allowing lifting, moving and manipulating of an object. Provides enhanced and safer grip during sensitive handling maneuvers. Made from composite material - non-magnetic, heat isolating and chemical resistant. Heat Resistant up to 302ºF (150ºC) constant and 482ºF (250ºC) short duration. Strong and durable construction can lift up to 22lbs. Operational ergonomic design.

DEKER EOD ProdderDesigned for detecting land mines, explosive devices and trip wires. Convenient and effective operation with maximum functionality. Extremely tough Israeli Army design, manufactured from spring steel.

Dimensions: Length closed: 550mm (21.65'') Length open: 1000mm (39.37'') Weight: 875g (1 lb, 14.86 oz.)

G-Clamp Gotcha

Designed by martial arts experts Dov Granchrow and Yaron Hanover. Low profile self-defense tool ensures you will never be caught empty-handed. Built into the brim of a hat, it can be carried even when wearing minimal clothing, such as shorts or a swimsuit. Enables quick and powerful pressure point standoff, restraining and disarming techniques. Discrete carry and access; reaching for a hat is non-threatening. MIL-SPEC reinforced polymer composite mounted under the brim of a reinforced hat.

Hat colors available: Black, Dark Earth, OD, ACU

Less Lethal Self-Defense Tool

Polymer Karambit training knife for use in knife training. Polymer construction and safe tip allow realistic training for Karambit knife training with minimized risk of injury. Black reinforced polymer composite with no sharp edges or points. No-slip texture and shape on handle. Finger loop for positive retention.

Enables quick and powerful pressure point restraining and disarming techniques. Compact for easy pocket carry. Index finger loop for added retention doubles as wrench. MIL-SPEC reinforced polymer composite. Not for use as a “knuckle duster,” brass knuckles, or a punching device.

Polymer Karambit Training Knife Pressure Point Restraining Tool

Karambit FCP

Pressure Point Force Multiplier

Baby Tonfa

Pocket sized tool that allows the application of a powerful and effective pressure point self-defense, restraining and disarming technique. Low-profile design can be carried in the pocket or as a keychain. Ergonomic design for maximum-strength finger placement. Reinforced polymer composite. Not for use as a punching device.

Pressure Point Force Multiplier Tool

Kubotan

Pocket sized tool that allows the application of a powerful and effective pressure point self-defense, restraining and disarming technique. Low-profile design can be carried in the pocket or as a keychain. Non-threatening shape. Ergonomic design for maximum-strength finger placement. Reinforced polymer composite. Not for use as a punching device.

Training and Self-Defense


Israeli Special

Forces

Hybrid Polymer/Steel Expandable Baton

HXB Baton

Made of high-tech composite materials with a steel insert and tip. Extremely light weight and slightly flexible for more effective strikes. Handle is overmolded with rubber. Butt of the handle contains tungsten carbide glass breaker. Expands to 22 inches with a flip of the wrist. Collapsed length is 9 inches. 9.5 oz. Includes belt/MOLLE pouch.

Polymer Training Knife

TK Polymer training knife for safe knife defense and knife use training. Point ends in a ball shape for extra safety. Reinforced polymer composite with no sharp edges.

Set of 2 Polymer Knives Polymer Ejection port cover

LO-2 PEC

Completely non-metallic and non-absorbent, ideal for EOD use. Made of high-tech composite materials with 60% glass fibers. Provides superior stabbing strength as well as a hard edge that can be re-sharpened. Serrated edge on both sides rips through materials like rope or webbing. Handle is comfortable to hold with thumb depression for secure grip. Lanyard hole and belt clip.

Miscellaneous

Rustproof polymer ejection port cover with adjustable tension to replace covers that will no longer stay closed on worn receivers, or to prevent wear on new receivers. Will not rust, deform or damage ejection port. Instead of replacing a worn upper receiver, just replace the ejection port cover.

Less than half the weight of the original!

Platforms: M16/M4/AR-15


Noise and Movement Eliminator

UGC

Eliminates gap between upper and lower receiver. Reduces noise while improving stability. Cost-effective solution for worn receivers. Prevents wear to new receivers.


Tire Deflator Gailil Horizontal Charging Handle insures proper operation of the rifle when mounting a full length upper rail. No Gunsmith needed.

The GCH is milled from lightweight, yet durable, 7075 aluminum, the GCH Galil Horizontal Charging Handle improves Galil handling characteristics and is compatible with the Galil AR/SAR and Micro Galil with a vertical charging handle.

TD-2 GCH

Creates effective, totally concealable carbines from a proven pistol platform for deep cover operations and security professionals.

Compact stock for concealment. Instantly extends for stability and accuracy. Increases effective range. Sling attachment allows weapon to be carried under the shooting arm in concealed location for instant deployment as a long arm. MIL-SPEC reinforced polymer composite. Used by undercover security personnel. Ideal for Class III Glocks. Instant installation with a single button.

When you buy this product, your Glock will become a short-barreled rifle. You must first register your Glock with the ATFE using ATFE Form 1. Does not fit Gen 4 Glocks.

GLR-17 Covert Collapsible Glock® Stock

Platform: Glock 17, 18, 22, 31, 34, 35, 37

GLR-440 Covert Collapsible Glock® Stock

Platform: Glock 19, 20, 21, 23, 32, 38

Related Accessories: GLCA

Attaches to standard flash suppressor, Shoot through design. Steel Sleeve allows tires to deflate quickly and quietly, hardened steel construction.

Compact stock for concealment.


Covert Collapsible Glock® Stock

GLR-17 / GLR-440

Glock Stocks Slide Covers

Can be used for force-on-force training to identify friend or foe. May also be used for competition, zombie shoots, etc. to allow customization of a pistol without permanent alteration of the pistol. For training purposes, or for use as a fun accessory. Popular with competition shooters as grip on slide is improved, especially when hands are wet or sweaty.

Attractive texturing gives excellent grip on slide. Available in multiple colors. May be painted in camouflage patterns, bright colors or zombie gore as desired. Fits in many soft (leather, nylon, etc.) holsters. For use in hard (Kydex or molded polymer) holsters, use a Glock 21 holster. MIL-SPEC reinforced polymer composite.

TacticSkin 17 Snap-on Skin for Glock 17 Slide

TacticSkin 19 Snap-on Skin for Glock 19 Slide

Snap-on Skin for Glock® Pistol Slides

TacticSkin


USM GIS

G1911

Universal Optic Mount for Pistols

Fits most handgun models with a front Picatinny or Glock-type accessory rail. Standard Picatinny top rail. Original sights remain usable. Facilitates fast sight alignment. Weighs only 2.75 ounces. Adds a front underside accessory rail in place of the original. Made from 6061 T6 aluminum.

Platform: Most Railed Pistols

Glock® Tactical Scope Mount

Mount compact optics on Glock pistols with front accessory rails. Excellent for use with Glock stocks. Allows use of iron sights. Fast sight alignment. MIL-SPEC reinforced polymer composite.

Platform: Glock®

Scope Mounts Rail Mounts for Handguns Pistol Grips

226PR

Allows rail based flashlights and accessories such as an M3/M6 to be mounted on the Jericho pistols, the Baretta M92/M9 pistols and the SIG P226 pistols.

Allows rear rocker switch to be activated by the fire control finger or the thumb of the off hand. Three piece lightweight aluminum construction that easily clamps over the pistol’s trigger guard. Installation only requires a small wrench included in the package. Fits tight enough to maintain zero on the M6 laser. Machined from billet 6061 T6 aluminum alloy. Hard coat anodized matte black per MIL-SPEC.

226PR Picatinny Rail Mount for SIG P226

Platform: SIG P226

BR92PR Picatinny Rail Mount for Baretta 92/M9

Platform: Baretta 92/M9

MJPR Picatinny Rail Mount for Jericho

Platform: Jericho/Baby Eagle pistols

BR92PR

MJPR

Picatinny Rail Mount for Handguns

226PR / BR92PR / MJPR

User-installed magazine well extension as alternative to expensive gunsmith installed extensions. Remove existing grips and install WG1911. Fits full-size 1911 pistols. Traditional 1911 diamond checkering pattern. Drop-in fit may require slight modification for ambidexterous safeties. MIL-SPEC reinforced polymer composite.

WG1911 1911 Polymer Mag Well Funnel Grips

G1911 1911 Polymer Standard Grips

Platform: Government (5'') 1911

1911 Polymer Mag Well Funnel GripsWG1911 / G1911

Manufactured with reinforced polymer composite to provide a lightweight, durable grip for your 1911. Textured for maximum non-slip control. Easy installation; no gunsmithing required.

Platform: 1911 (and most variants)

1911 Polymer Hand Grip


Miscellaneous Pistol Accessories

FCH Glock Charging Handle

Enables quick and easy charging of the Glock pistol when using a scope mount or a tactical stock. May be switched for right-hand or left-hand operation. Excellent solution for high-stress situations or when operator is injured. Popular with shooters who cannot grasp slide due to injury or age. Replaces the Glock back plate.

Platform: Glock® Pistol

Mounts on handgun accessory rails or with optional barrel rail mount on rifle barrels. Triggered by pressing weapon against the glass, it allows operators to break car (or other) windows without taking sight picture off of suspect. Quick release mount. Lower rail for mounting additional devices. Steel and MIL-SPEC reinforced polymer composite. Widely used by emergency services, law enforcement agencies, and SWAT teams. Ten- year warranty.

Platform: Most Pistols with Rail

Picatinny-Mounted Glass Breaker

WB-2

With its reinforced steel attachment, the GSCA provides a super secure attachment platform for a pistol safety cord. Glock grip compatible (except for Gen 4 models). Incorporates a non-protruding steel loop for extra strength and security. Manufactured with reinforced polymer composite and nickel-coated steel.

Platform: Glock® Pistol

Glock® Safety Cord Attachment

GSCA PLG

For mounting 1'' tactical lights to handguns. Places tail-cap switch in the right position for correct operation with support-hand thumb. Perfectly fits most pistol accessory rails. Quick release for fast installation or removal of mount. MIL-SPEC reinforced polymer composite.

Platform: Glock

1'' Light Side Mount for Handguns


Scorpus 226Sig 226 Level 1 holster Paddle/ BeltRight/ Left, Black, Tan,

Green

Scorpus 226SSig226 Level 1 Swivel HolsterPaddle/Belt

Right or Left Hand, Black, Tan, Green

Scorpus 226RSig 226 Level 2 Retention HolsterPaddle/Belt

Right or Left Hand, Black, Tan, Green

Scorpus 226SRSig226 Level 2 Swivel Retention HolsterPaddle/BeltRight or Left hand, Black, Tan, Green

SIGScorpus G-9 Glock 9mm/.40 Level 1 HolsterPaddle/ BeltRight or Left Hand, Black, Tan, Green

Scorpus G-9S Glock 9mm/.40 Level 1 Swivel HolsterPaddle/ BeltRight or Left Hand, Black, Tan, Green

Scorpus G-9RGlock 9mm/.40 Level 2 Retention HolsterPaddle/ BeltRight or Left Hand, Black, Tan, Green

Scorpus G-9SRGlock 9mm/.40 Level 2 Swivel Retention HolsterPaddle/ BeltRight or Left Hand, Black, Tan, Green

Glock.45 Scorpus G21 Glock .45 Level 1 HolsterPaddle/ BeltRight or Left Hand, Black, Tan, Green

Scorpus G21SGlock .45 Level 1 Swivel HolsterPaddle/ BeltRight or Left Hand, Black, Tan, Green

Scorpus G21RGlock .45 Level 2 Retention HolsterPaddle/ BeltRight or Left Hand, Black, Tan, Green

Scorpus G21SRGlock .45 Level 2 Swivel Retention HolsterPaddle/ BeltRight or Left Hand, Black, Tan, Green

SCORPUS HOLSTERSThe SCORPUS is an innovative holster that fits your firearm perfectly. Designed for quick draw as well as secure carry. The SCORPUS is made out of fiberglass-reinforced polymer composite. The slim compact design allows the pistol to ride close to the body. The finger channel keeps the index finger safely positioned during the draw. The paddle features a 35 degree adjustment option to allow the shooter to “set” the perfect angle for their use. Available in black, olive drab green or desert tan.

ALL HOLSTERS & MAGAZINES POUCHESAVAILABLE IN GREEN, BLACK OR TAN

1911

Glock

Scorpus1911 1911 Models Level 1 HolsterPaddle/ BeltLeft or Right Hand, Black, Tan, Green

Scorpus1911 S1911 Models Level 1Swivel Holster Paddle/ BeltLeft or Right Hand, Black,Tan, Green

Scorpus1911 R1911 Models Level 2 Retention HolsterPaddle/ Belt Left or Right Hand, Black, Tan, Green

Scorpus1911 SR1911 Models LevelSwivel Retention HolsterPaddle/ BeltLeft or Right Hand,Black, Tan, Green

NEW!


Makarov Smith & Wesson M&PScorpus PG-9Magazine Pouches Glock 9mm/.40 Magazine PouchPaddle/ BeltRight or Left Hand, Black, Tan, Green

Scorpus PG-9SMagazine Pouches Glock 9mm/.40 Swivel Magazine PouchPaddle/ BeltRight or Left Hand, Black, Tan, Green

Scorpus PG-9Magazine Pouches 9mm Steel Magazine PouchPaddle/ BeltRight or Left Hand, Black, Tan, Green

Scorpus PS-9SMagazine Pouches 9mm Steel Swivel Magazine PouchPaddle/ BeltRight or Left Hand, Black, Tan, Green

Scorpus M&P S&W M&P 9/.40 Full Frame and Pro Models Level 1 HolsterPaddle/ BeltRight or Left Hand, Black, Tan, Green

Scorpus M&PS S&W M&P 9/.40 Full Frame and Pro Models Level 1 Swivel HolsterPaddle/ BeltRight or Left Hand, Black, Tan, Green

Scorpus M&PRS&W M&P 9/.40 Full Frame and Pro Models Level 2 Retention HolsterPaddle/ BeltRight or Left Hand, Black, Tan, Green

Scorpus M&PSRS&W M&P 9/.40 Full Frame and Pro Models Level 2 Swivel Retention HolsterPaddle/ BeltRight or Left Hand, Black, Tan, Green

Scorpus 941 Jericho 941F Level 1 HolsterPaddle/BeltLeft or Right Hand, Black, Tan, Green

Scorpus 941S Jericho 941F Level 1 Swivel HolsterPaddle/BeltRight or Left Hand, Black, Tan, Green

Scorpus 941RJericho 941F Level 2Retention HolsterPaddle/ BeltRight or Left Hand, Black,Tan, Green

Scorpus 941SRJericho 941F Level 2 SwivelRetention HolsterPaddle/ BeltRight or Left Hand, Black, Tan, Green

Scorpus MakarovMakarov Level 1 HolsterPaddle/ BeltRight or Left Hand, Black, Tan, Green

Scorpus Makarov S

Makarov Level 1 Swivel HolsterPaddle/ BeltRight or Left Hand, Black, Tan, Green

Scorpus Makarov RMakarov Level 2 Retention HolsterPaddle/ BeltRight or Left Hand, Black, Tan, Green

Scorpus Makarov SRMakarov Level 2 Swivel Retention HolsterPaddle/ BeltRight or Left Hand, Black,Tan, Green

Magazine Pouches Jericho 941

60 THEMAKOGROUP.COM | 631-843-0490 | RTS TARGETS

61THEMAKOGROUP.COM | 631-843-0490 | RTS TARGETS

MWSR-FP 9 Target RTS Mobile Wireless Shooting Range SystemIdeal for Gun Clubs & Shooting Ranges

MWSR-SK 5 Target RTS Mobile Wireless Shooting Range System

NEW!

The Reactive Target System is a polymer self-healing static target, available with a variation of accessories and colors. This durable and lightweight product is the perfect solution for all types of shooting -CQB without the danger of ricochets, the audible hit indicator lets you shoot out to 300 yards. The versatility makes it perfect for both indoor and outdoor ranges. They are lightweight, easy to use and portable. Used by the IDF, Reactive Target Systems are the ideal solution for law enforcement, military and recreational training. Made from unique high-grade polymers containing no metal parts, the RTS eliminates ricochets and ensures shooter safety, even at a point blank range.

The versatility of RTS Target Systems makes them perfect for gun clubs and ranges. RTS targets can be used for competition among multiple shooters or single shooters working to sharpen their skills. Using the portable wireless hit counting system, targets can be placed out to 300 yards and instant feedback is provided indicating hits. The polymer self-healing targets make them ideal for CQB shooting without fear of ricochets and can withstand thousands of rounds. The targets are lightweight, portable and provide many shooting options for gun ranges and clubs.

Supports five shooters at one time with five targets and six poles.

Supports nine shooters at one time with nine targets and ten poles.

RTS Shooting Range Systems are easy to assemble and feature self healing polymer targets in your choice of colors. Numerator and sensor tallies hits on each target, plus remote controls allows for programming numerator down range. Numerator carry bag also included.


RTS1 RTS2 NRSKIT

RTS Self Healing Reactive Target with Two TorsosSelf-healing polymer topples over when hit. Choice of six colors red, green, blue, black, white or yellow.Easy to assemble.

Single Night Range Compete TargetSelf healing static polymer target with flashing orange light for night practice.Easy to assemble. Choice of six colors; red, green, blue, black, white or yellow.

NRSRKIT - Single spark reactive night range complete target. Flashing orange light turns red when hit. White flashing light also available.

NRSR3KIT - Single spark reactive three hits night range complete target. Takes three hits and restarts. Red, orange and white lights available.

NRSR6KIT - Single spark reactive six hits night range complete target. Takes six hits and restarts. Red, white and green lights available.

Single CQB Complete TargetIdeal for close quarter training. Self-healing polymer target slides down pole to simulate close quarter combat. Choice of six colors red, green, blue, black, white or yellow.Easy to assemble

CQB KIT

RTS Self Healing Static Target with Two TorsosSelf-healing static polymer target. Choice of six colors red, green, blue, black, white or yellow.Easy to assemble.

63THEMAKOGROUP.COM | 631-843-0490 | RTS TARGETS

SCREAMKIT COUNTKIT

Self Healing Counting Static Target with Two TorsosIncludes two self-healing polymer targets, choice of six colors and an independent hit counter to assist in long range shooting up to 300 yards.

Dual Veleta 2-4 Target SystemIdeal for rapid-fire practice. Includes four-150 mm and four-200 mm self-healing polymer targets that spin when hit.

Dual Veleta Three Target SystemIdeal for rapid-firepractice Includes three-150 mm and three-200 mm self healing polymer targets that spin when hit

Self Healing Screaming Static Target Kit with Two TorsosIncludes two self-healing polymer target that makes sounds when hit.Transmitter can be programmed for choice of sounds.Preset with three sounds

VELETA2-4 VELETA3


SWINGRACK

RTS ACCESSORIES and PARTS

Features two swinging/ falling self-healing polymer targets for practice.

- Scream

- EHCB

Dual Swinging Reactive Target SystemSelf-healing static polymer target. Choice of six colors red, green, blue, black, white or yellow.Easy to assemble

PJ - Racket 200mm Swinging/ Falling Target. Available in black, blue, green, red, yellow or white

CQB - CQB Target Connector

VSTOP - Versatile Falling Target Stopper

STOP - Winging Target Stopper

TJ - “T” Connector for Round Target Pole

ST24 - Veleta24 Connector

ST3 - Veleta3 Connector

NRS - Night Range Target Add –on (pack of three) orange

NRSR - Night Range Reactive Target Add-on (pack of three) white

NRSR3 - Night Range Reactive Target 3 Hits Add-on (pack of three) white, orange

NRSR6 - Night Range Reactive Target six Hits Add-on (pack of three) white, green

SCREAM - Reactive Screaming System for Reactive Target

COUNT - Independent Hit Counter for Static Target

RTRP - Long Round Target Pole (1 meter)

RTRPS - Short Round Target Pole ( ½ meter)

- EHN

- Count

- EHRC

RTT - Target Torso. Available in black, blue, green, red, yellow or white

RTP - Target Pole

RTJ - Smart Joint

RTBC - Base (no plate)

RTBP - Plate for RTBC

RTB - Base & Plate (RTBC & RTBP)

EHN - Target System Numerator

TFD-S - Plastic Figure F0E Dressing (pack of 12)

TFD-P - Plastic Figure FRIEND Dressing (pack of 12)

HES-1 - Sensor

EHT - Transmitter

EHRC - Remote Control

S150 - 150mm Target for Veleta 24 and Veleta3. Available in black, blue, green, red, yellow or white

S200 - 200mm Target for Veleta 24 and Veleta3. Available in black, blue, green, red, yellow or white

EHCB - Numerator Carrying Bag

FALLRAC - RTJ

- RTB

- EHT

Dual Falling Rack Reactive Target System

66 THEMAKOGROUP.COM | 631-843-0490 | ELANDER MAGS

QUALITY 5.56 MAGAZINESQuality magazines are required for reliable weapon systems. Magazines are considered wear items and can be the weakest link. Purchasing high-quality magazines that are built to last, can keep your rifle running reliably.

CHOOSING STEELWhen considering magazines, trade-offs must be weighed. Different materials have different strengths. We believe that steel E-Lander mags possess a combination of features that make them the best choice for long-term reliability:• Heavy-gauge steel bodies• Reinforced floorplates• Self-leveling anti-tilt followers• Extra-power springs• Closed mag catch windows• Exact, consistent MIL-SPEC dimensions• Meticulous quality control• Proven record in combat use and military testing

PROVEN COMBAT RECORDE-Lander magazines undergo continual rigorous testing to ensure quality remains consistent. First, E-Lander tests them in-house. Then the mags are tested by third party laboratories and by the many rifle manufacturers who ship their rifles with E-Lander magazines. The 30-round magazines underwent extensive testing, hard training and combat use by IDF Special Forces soldiers prior to being accepted as issue magazines. E-Lander springs, followers, coatings and manufacturing standards have proven to be among the best in the world. These are magazines you can trust.

20 round 5.56mm/.223 Rem. magazine. Heavy-gauge steel construction. Latest generation self-leveling anti-tilt followers feature a teflon-enhanced self-lubricating polymer. White followers for visibility in low light when performing chamber check for empty magazine. Durable coating far exceeds MIL-SPEC salt-spray and durability tests. Extra-power springs for reliability.

These magazines are manufactured with stringent quality control standards.

Black finish with white followers standard.

Excellent magazines for use when shooting from a bipod, or for use with the GL-MAG buttstock.

EARM20-W 20 rd. Steel M16 Magazine

Platform: M16, M4, AR-15, Tavor

20 RoundSteel E-Lander Magazine

Israeli Special

Forces

Israeli Defense Forces issue steel magazines. Heavy-gauge steel construction with reinforced floorplate. Latest generation self-leveling anti-tilt followers feature a teflon-enhanced self-lubricating polymer. Current version has a closed mag catch window. White followers for visibility in low light when performing chamber check for empty magazine. Durable coating far exceeds MIL-SPEC salt-spray and durability tests. Built to MIL-SPEC in every dimension. Extra-power springs for reliability.

Rifle manufacturers who have tested these magazines agree that these are the most perfectly consistent MIL-SPEC magazines they have tested. These magazines are manufactured with stringent quality control standards and IDF Tavor rifles ship with these magazines in Israel.





40 round 5.56mm/.223 Rem. magazine. Heavy-gauge steel construction with reinforced floorplate. Latest generation self-leveling anti-tilt followers feature a teflon-enhanced self-lubricating polymer. Current version has a closed mag catch window. White followers for visibility in low light when performing chamber check for empty magazine. Durable coating far exceeds MIL-SPEC salt-spray and durability tests. Extra-power springs for reliability.



Excellent magazines for competition use.




All E-Lander mags ship with self-leveling high-visibility white followers

AR-15/M16

67THEMAKOGROUP.COM | 631-843-0490 | ELANDER MAGS

Legal in New Jersey

and Colorado!

15 round 5.56mm/.223 Rem. magazine. Heavy-gauge steel construction. Latest generation self-leveling anti-tilt followers feature a teflon-enhanced self-lubricating polymer. White followers for visibility in low light when performing chamber check for empty magazine. Durable coating far exceeds MIL-SPEC salt-spray and durability tests. Extra-power springs for reliability.



EARM15-W 15-rd. Steel M16 Magazine



25-round steel magazine for 6.8 SPC. Heavy-gauge steel construction with reinforced floorplate. Durable coating far exceeds MIL-SPEC salt-spray and durability tests. White followers for visibility in low light when performing chamber check for empty magazine. Built to MIL-SPEC in every dimension.

These magazines are tested by special military forces and anti-terror units and are manufactured with stringent quality control standards.


E68M25 W 25-rd. Steel Magazine for 6.8 SPC


Steel E-Lander Magazine



10 Round

25/10-round 7.62 mm magazine. Heavy-gauge steel construction. Latest generation self-leveling anti-tilt followers feature a teflon-enhanced self-lubricating polymer. White followers for visibility in low light when performing chamber check for empty magazine. Durable coating far exceeds MIL-SPEC salt-spray and durability tests. Extra-power springs for reliability.



E68M25 W 25-rd. Steel Magazine for 6.8 SPC


Steel E-Lander Magazine

25 Round 6.8 SPC EARM 25Rd/10Rd - 762

1911

High quality eight-round steel magazines for 1911 pistols. Innovative laser-welded seam for superior strength. Built with high-quality springs for durability and reliability. Extremely durable coating. Polymer floorplates.

E19116S 6-round 1911 Mag, Steel Floorplate

Platform: 1911 Pistols

E19117P 7-round 1911 Mag, Polymer Floorplate


E19118P 8-round 1911 Mag, Polymer Floorplate


Magazines for 1911 Pistols

1911 Mags 6, 7, 8, Rd

68 THEMAKOGROUP.COM | 631-843-0490 | ELANDER MAGS

Grab-it-and-go combination of 30-round E-Lander Magazine and paddle magazine belt carrier. Carrier slips easily over belt, waistband, or pocket to keep an extra magazine handy. 30-round steel E-Lander magazine and MIL-SPEC reinforced polymer belt carrier (556 POUCH) combo.

MAPC30 E-Lander 30 rd. Magazine and Carrier


Latest generation self-leveling, anti-tilt, self-lubricating followers. These are intended to replace older followers in standard aluminum GI magazines and fit most aftermarket magazines. An inexpensive way to increase the reliability of aluminum M16 magazines. Available in black, white, red or green. Can be ordered in sets of four by color, or in a set of four colors.

ATF4P Self-Leveling Followers for M16/AR15 Mags


Heavy-gauge steel magazine couplers couple two magazines instantly without tools. Spring-loaded coupler securely clamps to magazines using a locking lever. Will not put too much pressure on magazines.

These are the only couplers designed to clamp magazines in various configurations, including staggered side-by-side for M16/AR-15 rifles, one up and one down, facing the same direction or opposite directions, or one facing forward and one facing back for use on Tavors and other bullpup rifles.

Two sizes to fit MIL-SPEC metal magazines or polymer magazines.

Black phosphated heavy-gauge steel.

E-MCM Mag Coupler for MIL-SPEC Metal Mags

E-MCP Mag Coupler for Polymer Mags

Platform: Metal or Polymer M16 -type Mags

Mag and Pouch Followers Mag CouplersMagazine and Paddle Belt Carrier Self-Leveling Anti-Tilt Followers Steel Magazine Couplers

High quality steel magazines for full-size and compact Jericho pistols. Also fits certain Tanfoglio and CZ pistols. Extremely durable coating. Choose from polymer or steel floorplates.

EJCM10P 10 round Jericho Mag Polymer Floorplate

EJCM10S 10 round Jericho Mag Steel Floorplate

EJCM12P 12 round Jericho Mag Polymer Floorplate

EJCM12S 12 round Jericho Mag Steel Floorplate

EJCM16P 16-round Jericho Mag, Polymer Floorplate

EJCM16S 16-round Jericho Mag, Steel Floorplate

Platform: Full-size Jericho/Baby Eagle Pistols

EJCM13P 13-round Jericho Mag, Polymer Floorplate

EJCM13S 13-round Jericho Mag, Steel Floorplate

Platform: Compact Jericho/Baby Eagle Pistols

NOW AVAILABLE IN 40 CALIBER SMITH & WESSON

Magazines for Jericho Pistols

Jericho CompactPolymer Floorplate

Jericho Mags

Ships with white follower

FAB Defense 556 POUCH also available separately, see page 48

Shown with green replacement follower

Staggered M4/M16

Configuration

Tavor (bullpup) Configuration

Facing front and back to keep extra mag on

outside of rifle.Israeli Special

Forces

Jericho / CZ

THEMAKOGROUP.COM | 631-843-0490 | FRONT LINE70

The Mako Group’s holsters are manufactured in Israel by Front Line. Designed in cooperation with the Israeli Defense Force, Front Line holsters are used by Israeli military, law enforcement, special forces and similar units worldwide.

TO ORDERTo order any of our Front Line holsters, please go to IDFholsters.com, our holster superstore. Your Mako account automatically links to IDFholsters.com, so there is no need to set up a separate account.

At IDFholsters.com, you will find an ever-growing inventory of over 3,000 holsters to choose from—more than enough to satisfy any shooter’s specific needs. You can easily browse by handgun or material and style to find the ideal holster.

Belt & Paddle Holsters

Concealment Belt Holsters

IWB Concealment Holsters

IWB Tuckable Holsters

Kydex Holsters

Kydex New Generation (KNG) Holsters

Leather Holster Belts

Leather Holsters

Magazine Pouches

Multi-Purpose Holsters

New Generation (N.G.) Holsters

Pancake Holsters

Pocket Holsters

Polymer Holsters & Mag Pouches

Retention Holsters

Shoulder Holsters

Ankle Holsters

MATERIAL & STYLEDesigns range from classic leather styles to models featuring innovative retention systems and cutting-edge materials.

THEMAKOGROUP.COM | 631-843-0490 | FRONT LINE 71

HANDGUN MODELSFront Line offers holsters for all the handgun models listed below. For a more complete list, go to IDFholsters.com and click on “WEAPON LIST.” If you don’t see a certain model, please contact us. There may already be a mold in Israel. These holsters are not one size fits all. Each Front Line holster is custom molded to a specific weapon—the way it should be.

BARAK

BERETTA F9281848770718000NanoPX4 Storm

BERSA

BUL M5M5 Ultra-XStormImpactCherokee CompactCherokee FS

CARACAL

CHIAPPA Rhino

C.Z 75D compact75 compact7575 Tactical Sport8399100SP01 ShadowSP01 Phantom2075 Rami75 P07 DutyP-07P-09

COLT

1911 5” (with or without a rail)1911 4” (Commander style)Colt Mustang

DIAMONDBACK DB380

FMK 9C1

FNHFN57FNX-9HP9mm

GLOCK 1719202122232627283031324242 w/ Crimson Trace43

GRAND POWERX-Cal

HKP7/13USPUSP CompactUSP ExpertP2000P30

JERICHOB

JERICHO/ BABY EAGLEPolymer FBLPolymer PLPolymer PSLSteel FSteel FSSteel Full-SizeSteel Mid-Size

KAHR 9P-380P-380 w/Crimson Trace

KEL-TECP3ATP3AT w/Crimson TracePF9PMR-30

KIMBERSolo

MAKAROV

PARA-ORDINANCE

RUGER

P85P89LCPLC9LC9 w/ Crimson TraceSR9Full Size or CompactSR22

SCCY

SIG P220P225P226 P226X5P228P229 P230P232P238P239P250P290P3201911 MAXPro (2022)

S&W 596999GOVERNORSIGMAM&P SHIELDM&P SHIELD w/ Crimson TraceBodyguardM&P 4.25

SPHINX

SPRINGFIELD XD3”XD4”XD-SXD-S w/ Crimson Trace

STEYR MA1

STI

TAURUS 24/7 - 4”24/7 - 5.25”709/740 - 3.2” Slim JUDGE REVOLVERMILLENIUM 3.25”PT809ETCP

TT

TANFOGLIO STOCK II

TASER M-26X-26

WALTHER P88P99PPQPPPPKP5P22PPSPPXPK380

2''- 6'' REVOLVERS2” Revolver 383” Revolver 3574” Revolver 3574” Revolver 386” Revolver 357

If you don’t see your pistol model listed above, go to IDFHolsters.com


FRON

T LI

NE

HOLS

TERS

The KNG PD1 holster is worn on the belt (BFL version) or with a paddle. Positive retention is achieved by the Push ‘n’ Draw System (PDS). The holstered pistol is securely locked in place by a latch which holds the trigger guard. A natural downward push during the draw unlocks the pistol. The locking system has no obvious release buttons, protecting the pistol from being drawn by an unauthorized person. BFL version shown below.

KNG Holster & PDS-1 -

BFL Version – KNGxxPD1

KNG Holster & PDS-1

Paddle Version – KNGxxPD1P

KNG is an advanced multi-layer material developed for tactical and duty holsters. The outside layer is Kydex®,the second layer is Cordura®, the third layer is PVC, molded to fit the weapon. The fourth layer is polyethylene for extra protection and the inner layer is a smooth, waterproof velvet for the best protection of the pistol’s finish. This holster is worn on the belt (BFL version) or with a paddle. Secure retention is achieved by the screw-adjustable tension of the molded Kydex.

KNG Holster on Belt - BFL Version – KNGxx

KNG Holster - Paddle Version – KNGxxP

The KNG SR holster is worn on the belt (BFL version) or with a paddle. Positive retention is achieved by the Side Release (SR) system. The holstered pistol is securely locked in place by a latch which holds the trigger guard. Pressing the side release during the draw unlocks the pistol. Paddle version shown.

KNG Holster & SR

BFL Version – KNGxxSR

KNG Holster & SR

Paddle Version – KNGxxSRP

This Kydex holster is worn on the belt (BFL version) or with a paddle and features a suede lining to protect against holster wear. Secure retention is achieved by the adjustable tension of the molded Kydex. BFL version shown.

Kydex Holster with Lining

BFL Version – K40xxC

Kydex Holster with Lining

Paddle Version – K40xxPC

KNG HolsterKNG Holster KNG HolsterWith Push ‘n’ Draw Level 1 (PDS-1)Belt and Paddle Versions With Side Release (SR) With Lining

Kydex® Holster

KNGxxPD1

KNGxx

K40xxCKNGxxSRP

Push ‘n’ Draw System (PDS)

Side Release System (SR)

Adjustable TensionSystem


Featuring the same construction as the LKC, the SKC features a rugged leather-looking synthetic outer layer. The less expensive synthetic material retains the classic look of leather with better all-weather durability than leather. Paddle version shown.

Choose black or brown.

3-Layer Holster (Synthetic/Kydex/Suede Lining)

Belt Version – SKCxx

3-Layer Holster (Synthetic/Kydex/Suede Lining)

Paddle Version – SKCxxP

SKC HolsterLKC Holster SKC (Synthetic/Kydex/Suede) Three-Layer Holster

LKC (Leather/Kydex/Suede) Three-Layer Holster

SKCxxPLKCxxP

The LKC combines the classic look and comfort of leather and the smooth draw afforded by suede with the tactical advantages of Kydex. The outer layer of the LKC is molded premium leather. The inner layer is quality suede for quiet draws and unparalleled protection for the pistol. Hidden between these two layers is a rugged Kydex holster. The pistol is securely gripped by the adjustable tension of the Kydex Paddle version shown.

Choose black or brown leather.

3-Layer Holster (Leather/Kydex/Suede Lining

Belt Version – LKCxx

3-Layer Holster (Leather/Kydex/Suede Lining)

Paddle Version – LKCxxP

An unlined Kydex holster for wear on the belt that features sturdy construction. Secure retention is achieved by the adjustable tension of the molded Kydex.

Kydex Holster with Lining - BFL Version – K40xx

Unlined Kydex®

Belt Holster – BFL

K40xx

Israeli Special

Forces

Here’s a small sample of some of our most popular

holsters.

Suede LivingKydex®

Synthetic

Suede LivingKydex®

Leather


Similar in design to the Kydex belt holster, production costs are decreased by using a molded polymer. The molded holster is an excellent value for range use and every day carry, while we recommend the Kydex version for professional users, like law enforcement and military. Secure retention is achieved by the adjustable tension of the molded polymer.

Molded Polymer Paddle Holster – JxxP

Production costs for this IWB holster are decreased by using a molded polymer. The molded holster is an excellent value for range use and concealed carry, while we recommend the Kydex version for professional users, like law enforcement and military. Secure retention is achieved by the adjustable tension of the molded polymer .

Belt loops are black leather and can be snapped to or removed from the belt without removing the belt from the pants.

Molded Polymer IWB Holster – J2xx

Quad Holster IWB HolsterMulti-Function Leather Holster with Suede Lining

Molded Polymer Molded Polymer

Paddle Holster

JxxP

QUADxxC

Inside

Outside

Switch from Right to Left

Built like the LKC holster with brown or black leather laminated over a suede-lined Kydex® holster, the Quad Holster is our most flexible holster. Switch from right-hand to left-hand wear, strong-side or crossdraw and wear it as an IWB holster or a paddle holster.

Lend your holster to a left-handed shooter or switch from IWB to OWB paddle carry for hiking or to meet a training course requirement.

Both paddle and IWB belt clip are easily removable and can be switched from left to right.

Suede lining protects the finish of the pistol and the adjustable tension of the Kydex® retains the pistol securely.

Choose black or brown leather.

Quad Holster – QUADxxCJ2xx

Polymer Holsters


Polymer Accessories

J3130

The molded polymer magazine pouches are an excellent value for range use and concealed carry, while we recommend the Kydex® versions for professional users, like law enforcement and military. Secure retention of the magazines is achieved by the screw-adjustable tension of the molded polymer .

Available with belt loops or a paddle.

Adjustable size allows carry of various double-stack magazines. Holds two magazines facing forward for correct reloading technique.

Molded Polymer Magazine Pouch

Belt Version – J3130

Molded Polymer Magazine Pouch

Paddle Version – J3130P

Magazine Pouches Molded Polymer

Israeli Special

Forces

REAL SWEAT. REAL INNOVATION.REAL COMBAT ACCESSORIES.

THEMAKOGROUP.COM

2016 CATALOG - The Mako Group

Documents

Transcript of 2016 CATALOG - The Mako Group