2016 ACCESSORY PRODUCTS CATALOG - Husker …€¦ · 2016 ACCESSORY PRODUCTS CATALOG. PG 2 HUSKER...
Transcript of 2016 ACCESSORY PRODUCTS CATALOG - Husker …€¦ · 2016 ACCESSORY PRODUCTS CATALOG. PG 2 HUSKER...
Call 402.463.1531 / 800.752.0888 for sales and service
2016 ACCESSORY PRODUCTS CATALOG
PG 2 HUSKER POWER PRODUCTS
RETURN GOODS POLICY
RETURN MERCHANDISE: An RMA# (Return Goods Merchandise Number) must accompany any items being returned, along with a copy of the original invoice. You will need to call and talk to someone in the Parts Dept. They will be able to tell you what information will be needed to return your item. They will then issue a RMA#. We have, in the past, received packages from UPS with no invoice or information on why an item is being returned. If this occurs we will issue an additional 10% restocking fee along with the normal 20% restocking charge. In our busier season, it’s easy for these boxes to be set aside and not be taken care of properly; hopefully, this will save any problems with issuing credits and starting warranty claims. Remember, shipping labels need to have the RMA# on it.
Merchandise shipped and billed over 30 days will not normally be accepted for return.
The credit will be applied to your account, unless previous arrangements have been made.
RESTOCKING CHARGES: Merchandise returned will be charged a 20% restocking fee, with the exception of special order items. Some vendors charge us more than 20% and we will have to charge our valued customers accordingly. We have a simple Return Policy, if a RMA# is not issued before you return the goods an additional 10% will be added to the normal 20% fee.
SPECIAL ORDER ITEMS: A 20% deposit will be required at the time of ordering. The order will not be placed with our vendor until we have received the deposit. This policy will be waived if you have an account in good standing with us. Non-stock items going back to our vendor will be subject to both restock charge and return freight charges.
All returns are handled on a case by case review.
Thank you for your cooperation and we look forward to doing business with you this year.
PG 32016 ACCESSORY PRODUCTS CATALOG
TABLE OF CONTENTS
110V Engine Heaters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34BLU RIVER Heat Exchangers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Certified Gas Engine Carburetion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Dripper Regulators & Oil Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Drive Line & Companion Flange Specs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Drive Plate, Auxiliary Pulley & Flex Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Driveshaft Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Driveshafts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Engine & Gearhead Companion Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Engine Oil Drain Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Engine Radiators & Cooling Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Engine Shelters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39Engine Trailers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Exhaust Primers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Gear Reduction Clutch Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Industrial Certified Gas Engines Plug Wires . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Industrial Gas Engine Exhaust Manifolds/Headers . . . . . . . . . . . . . . . . . . . . . . . 30Industrial Gas Engine Plug Wires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Intake & Exhaust System Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31LIMA MAC Irrigation Generators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Manifold Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Murphy Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10NACD Clutch Kit Breakdown. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-25Power Take-Off Clutches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Tachometers and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Throttle Cables & Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Vibra-Damp Resilient Driveshafts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
800.752.0888CALL
for pricing and availability
of items not listed
PG 4 HUSKER POWER PRODUCTS
MURPHY PRODUCTS
PART # DESCRIPTIONL129 Oil Level Gauge
LM500-TF Lube Level Maintainer
15000238 Bracket for LM2000
803952A L129 Gaskets
15000480 L129 Glass & Gasket Kit (replaces Plexiglas style)
15000485 L129 Glass & Gasket Kit
L150 Water Level Gauge (Repair Kit not avail. replace w/ new)
15000107 PS Fitting; 1/4 Tube
15010167 PS Fitting; 1/4 Hose Barb
15050910 Case, Body Gasket L150
SV12 Fuel Solenoid
SV12-HP Fuel Solenoid (High Pressure)
SV24 Fuel Solenoid (24 Volt)
55010141 Coil Only (SV12)
55010145 Coil Only (SV24)
CKV2336 Check Valve
RP2307B Solenoid, 12V
RP2308B Solenoid, 24V
RP2309B Solenoid, 12V (14# Pull)
RP75-12 Rack Puller, 12V, 4FT
117 Magnetic Switch, 12-24V
117PH Magnetic Switch, 12-24V
MS2100 Magnetic Switch
MS2110 Magnetic Switch
MS2120 Magnetic Switch
518APH12V Magnetic Switch, 12V
518APH24V Magnetic Switch, 24V
782-1074 Fuse For 117/518’s
25050547 Dust Boot for Magnetic Switch
/518PH-12
2016 ACCESSORY PRODUCTS CATALOG PG 5
MURPHY PRODUCTSCON’T
PART # DESCRIPTION20V2 Vacuum Gauge
20V3 Vacuum Gauge
20P-15 Pressure Gauge 0-15
20P-30 Pressure Gauge 0-30
20P-50 Pressure Gauge 0-50
20P-75 Pressure Gauge 0-75
20P-100 Pressure Gauge 0-100
20P-150 Pressure Gauge 0-150
20P7-15 Pressure Gauge, w/ Lock Out
20P7-30 Pressure Gauge, w/ Lock Out
20P7-50 Pressure Gauge, w/ Lock Out
20P7-75 Pressure Gauge, w/ Lock Out
20P7-100 Pressure Gauge, w/ Lock Out
20P7-150 Pressure Gauge, w/ Lock Out
20P7-100-HL Pressure Gauge, w/ Lock Out & High-Low
20P-75-FS Pressure Gauge, w/ Lock Out & Fail Safe
20P-100-FS Pressure Gauge, w/ Lock Out & Fail Safe
PSO421 Pressure Switch
AT03069 Auto Throttler
OPLC-A-100 100 Pressure Switch Gauge
OPLC-A-200 200 Pressure Switch Gauge
60-0-60 Amp Meter
VM 12 Volt Meter (12 Volts)
VM 24 Volt Meter (24 Volts)
VM600 Volt Meter (600 Volts)
PB128S Stop Button
65010258 Start-Run Toggle Switch
65010082 Diode w/ Pigtail
65000362 Diode w/ Male Spade
65010123 Terminal Strip (4 Posts)
\ 20V3
PG 6 HUSKER POWER PRODUCTS
MURPHY PRODUCTSCON’T
PART # DESCRIPTION20T-250-4 Water Temp Gauge, 4 ft
20T-250-6 Water Temp Gauge, 6 ft
20TJD-250-6 John Deere Water Temp Gauge, 6 ft
20T-250-8 Water Temp Gauge, 8 ft
20T-250-10 Water Temp Gauge, 10 ft
20T-250-12 Water Temp Gauge, 12 ft
20TH-320-4-M10 Air Temp Gauge, 4 ft (160-320)
20TH-320-6-M10 Air Temp Gauge, 6 ft (160-320)
20SD-250-1/4 Water Temp Gauge, Direct Mount 1/4”
20SD-250-1/2 Water Temp Gauge, Direct Mount 1/2”
20T-250-4-FS Water Temp Gauge, 4 ft w/ Fail Safe
20T-250-6-FS Water Temp Gauge, 6 ft w/ Fail Safe
12T Timer with Case
12T Less Case Timer, 12V Less Case
24T Timer, 24V
24T Less Case Timer, 24V Less Case
65000249 Banjo Fitting (Fuel) (14MM x 1/4NPT Female)
\WD300LV
2 Gauge Panel-less Valve (SV12) \20T SERIES
2016 ACCESSORY PRODUCTS CATALOG PG 7
MURPHY PRODUCTSELECTRIC & VOLTAGE GAUGES / HOUR METERS
PART # DESCRIPTIONEGS21P-100-12 Pressure Switch Gauge 12V
EGS21P-100-24 Pressure Switch Gauge 24V
EG21P-100-12 Pressure Gauge 12V
ESP-100 Sending Unit for Above Gauges
EGS21T-250-12 Temp Switchgauge 12V
EGS21T-250-24 Temp Switchgauge 24V
EST250/300-X** Sending Unit for Above Gauges
MUST ALSO PURCHASE APPROPRIATE TEMP ADAPTER**
10002444 Temp Gauge Adapter (16M x 1.5”)
10050069 Temp Gauge Adapter (3/8” NPT)
10002442 Temp Gauge Adapter (14M X 1.5)
10050105 Temp Gauge Adapter (3/4” NPT)
10050131 Temp Gauge Adapter (1/2” NPT)
10050167 Temp Gauge Adapter (1/4” NPT)
VOLTAGE GUAGES
60-0-60 Amp Meter
MT90 Tach, Digital (Mag & Alternator P.U.)
VM 12 12 Volt Meter
VM 24 24 Volt Meter
VM600 600 Volt Meter
HOUR METERS
SM10010 Hour Meter
41789-00 Bracket Hour Meter (SM10010)
HP2-05-09 Hour Meter (use dampner below)
HP2-05-13 Dampner for HP2-05-09
SM10002 Rectangular Hour Meter
/EG SERIES
PG 8 HUSKER POWER PRODUCTS
MURPHY PRODUCTS32090485 - TIER III PANEL BUILD OF MATERIAL
800.752.0888CALL
for pricing and availability of items not listed
PLEASE NOTEPricing & Parts info on the
following page
2016 ACCESSORY PRODUCTS CATALOG PG 9
ITEM # DESCRIPTION PART # QTY.Not Shown Isuzu PowerView 5Y3-091 1
2 Magnetic Switch 12V 518APH12V Voltage Specific
2 Magnetic Switch 24V 518APH24V Voltage Specific
3 Key Switch 00000778 1
Key Only 00003235 1
5 Potentiometer (12V or 24V) 36999967 1
Knob for Potentiometer PKT70B 1
6 Toggle Switch TS 2
7 Bulb 12V 00000029 Voltage Specific (2)
7 Bulb 24V 00001820 Voltage Specific (2)
7 Lamp Holder 00000749 2
8 Red Lens 00000750 1
9 Amber Lens 00002385 1
10 Relay 12V 75111 Voltage Specific (4)
10 Relay 24V 75025 Voltage Specific (4)
10 Relay Socket 75280 4
15 Fuse, Blade type 20A 782-1110 1
16 Fuse, Blade type 30A 782-1112 3
17 Fuse Holder 00000933 2
18 Fuse, Glass AGC10 782-1051 3
23 4 Position Fuse Block 00030870 1
28 Starter Cut Relay 95J200E 1
11 Terminal Block 65010125 1
Diode 65010082 1
Panel Wiring Harness 78000693 1
Shock Mounts CM x 1/2 4
PG 10 HUSKER POWER PRODUCTS
PART # DESCRIPTION
GENERAL PURPOSE ENGINE PANELS
WHB 3 Gauge Panel (Oil, Temp, Amp & 117)
WD300LV 2 Gauge Panel-less Valve (SV12)
GAS ENGINE PANELS
30090265 Panel 4 Gauge (Non-Cert Engine) (Includes Amp, Oil, Temp, Vacuum)
39300105 Black Certified Engine Panel (Controls Inc. style)
40350399 Murphy ML1000 Panel (standard on all certified gas engines starting in 2016)
DIESEL ENGINE PANELS
30350524 Deluxe 3 Gauge Panel (Diesel) (less hour meter & starter button)
30350646 Loaded Enclosed Panel (Diesel) (temp/oil/117/amp/hour/start button)
HP2-05-28 Blank Enclosed Panel
40350399 Murphy ML1000 Panel (This is the panel in TPI1651 option on engine order sheet)
3209485 Murphy Tier III Panel (does not include power view) See page 9 for breakdown of panel.
PANEL PIECES
HP2-05-03 Start Button Diesel w/ Rubber Cover
SWX1240 Start Button, Non-Certified Gas Engine
9506023BX Key Switch w/ Keys for 39300105 Panel only
83451601 Key Only, For 39300105 Panel or 9506023BX Switch
31101BX Harness Key Switch, for 39300105 Panel
65700148 Key Switch w/ Keys for 40350399 Panel (ML1000 Panel)
65000460 Key, Set of 2, for 40350399 Panel (ML1000) or 65700148 Switch
40350397 Controller, MPC-10 for 40350399 Panels
MURPHY PRODUCTSPANELS & PANEL PIECES
2016 ACCESSORY PRODUCTS CATALOG PG 11
TACHOMETERS AND ACCESSORIES
PART NUMBER DESCRIPTION
TACHOMETERS
103656 Alternator P.U. 0-3000 RPM
103678 Tachometer/Hour Meter Combo, Alternator P.U. 0-3000 RPM
103736 Magnetic P.U. 0-4000 RPM
103757 Tachometer/Hour Meter Combo, Magnetic P.U. 0-3000 RPM
TC9755 Distributor P.U. 0-6000 RPM
TC9133 Tachometer/Hour Meter Combo, Distributor P.U. 0-6000 RPM
R8597 Mechanical P.U. 5:1 Ratio, 0-3500 RPM
R8599 Tachometer/Hour Meter Combo, Mechanical P.U., 5:1 Ratio
82682 Hand Tach.
50446D004 Voltage Reducer 12/24 Volt
TACHOMETER KITS
5Y4-006 Magnetic P.U. Tachometer and Sensor (3/4” x 2.6”)
TACHOMETER PICK-UPS
71544-00 Magnetic Sensor, 5/8” x 1.9”
HP2-55-07 Magnetic Sensor, 3/4” x 2.6”
17200 Magnetic Sensor, 3/8” x 2.75”
MOUNTING PLATES
5757323 Tachometer Mounting Bracket
/TC9755
Distributor P.U. 0-6000 RPM
\TC9133
Tachometer/Hour Meter Combo
PG 12 HUSKER POWER PRODUCTS
IMPCO CARBURETION
PART NUMBER DESCRIPTION
CARBURETORS
CA125-52 Impco Carburetor LP/NG (Mixer&Throttle Body)
CA125M Impco Mixer only
CA225-94 Impco Carburetor LP (Mixer&Throttle Body)
CA225M Impco Mixer only (LP)
225-94 Impco Carburetor NG (Mixer&Throttle Body)
CT425-2-37 Impco Carburetor NG (Mixer&Throttle Body) w/ 3” Flange
CT425-2 Impco Carburetor LP (Mixer&Throttle Body) w/ 3” Flange
CT425M-2 Impco Mixer only
CONVERTERS
JB Impco Model JB Vaporizer
LB Impco Model LB Vaporizer
EB Impco Model E Vaporizer w/ Blue Spring
REPAIR PARTS
AV1-12 LP #16 Valve & Diaphragm Assy. (CA225-94)
AV1-14 LP & NG Valve & Diaphragm Assy. (CA125-52)
CV1-12 NG #17 Valve & Diaphragm Assy. (225-94)
AV1-16-2 LP Valve & Diaphragm Assy. (CT425-2)
AV1-1637-2 NG Valve & Diaphragm Assy. (CT425-2-37)
RK-E Repair Kit for Model E
RK-J Repair Kit for Model J
RK-L-2 Repair Kit for Model L w/ silicone diaphragm
7008A-12-O Fuel Solenoid, for LP 12V engines
454460 Carb Adapter, 4BBL (350-454)
56 Gasket, intake to carb adapter
73355G002 Natural Gas Filter Elemental only
2016 ACCESSORY PRODUCTS CATALOG PG 13
CERTIFIED GAS ENGINE CARBURETIONFOR HPPI PRODUCED ENGINES
PART NUMBER DESCRIPTION
IEPR
38901060 IEPR for 3.0L Chevy
38901059 IEPR for 4.3L Chevy
38901058 IEPR for 5.7L Chevy
38901057 IEPR for 8.1L Chevy
38901133 IEPR for 8.8L Chevy
MIXER
32501704 Mixer 3.0L Chevy
32501774 Mixer 4.3L Chevy
32501705 Mixer 5.7L Chevy (E330)
32501690 Mixer 8.1L & 8.8L Chevy (480)
REPAIR PARTS
32502216 Asco Valve 3/4” (3.0L)
39300113 Asco Valve 1” (4.3L - 8.8L)
106871 Mixer Repair Kit (32501704)
106823 Mixer Repair Kit (1 x 4.3L-5.7L) (2 x 8.8L)
32501778 Adapter, Fuel Inlet to Mixer (3.0L-4.3L)
1139524 Screw for 32501778 (QTY-4)
32501779 Adapter, Fuel Inlet to Mixer (5.7-8.8L)
35000674 Screw for 32501779 (QTY-4 )
PG 14 HUSKER POWER PRODUCTS
DRIVESHAFT SIZE PART #
SHORT COUPLED DRIVESHAFT ASSEMBLIES
SC – 41 X 9-7/8” 8134-SF
SC – 48 X 9-7/8” 202990-1
SC – 55 X 9-7/8” 204249-6
SC – 61 X 9-7/8” 906224-1
FLEXIBLE IRRIGATION DRIVESHAFTS TUBULAR TYPE
SL - 41 X 24” 917785-1
SL - 41 X 36” 917785-2
SL - 41 X 48” 917785-3
SL - 48 X 24” 917786-1
SL - 48 X 36” 917786-2
SL - 48 X 48” 917786-3
SL - 55 X 24” 917787-1
SL - 55 X 36” 917787-2
SL - 55 X 48” 917787-3
SL - 61 X 24” 917788-3
SL - 61 X 36” 917788-1
SL - 61 X 48” 917788-2
SL - 71 X 36” 917789-1
SL - 71 X 48” 917789-2
Bolt Kit 35-41 series 35B-HWK
Bolt Kit 48 series 48B-HWK
DRIVESHAFTS
WARNING ALL DRIVESHAFTS
SHOULD BE COVERED WITH SHAFTGUARD TO
PREVENT INJURY. SEE PAGE 15 FOR GUARDS.
\SHORT COUPLED DRIVESHAFT
\TUBULAR TYPE
2016 ACCESSORY PRODUCTS CATALOG PG 15
DRIVESHAFT PARTS
PART #
U-JOINTS
1410 Series 5-160X
1480 Series 5-188X
1550 Series 5-155X
FLANGE YOKE
1410 Series 3-2-159
1480 Series 3-2-479
SLIP YOKE
1410 Series 3-3-508KX
1480 Series 3-3-1601KX
DRIVE SHAFT SHIELDS
10”- 18” Adjustable (7” Dia.) 10-18 $60.00
24”- 42” Adjustable (7” Dia.) 24-42 $65.00
36” - 54” Adjustable (7” Dia.) 36-54 $65.00
36” - 66” Adjustable (12” Dia.) 36-66 $124.00
14” - 24” Adjustable (12” Dia.) 14-24 $90.00
28” - 54” Adjustable (12” Dia.) 28-54 $140.00
Mounting Hardware included on all sizes
\SLIP YOKE
\FLANGE YOKE
U-JOINT/
PG 16 HUSKER POWER PRODUCTS
VIBRA-DAMP RESILIENT DRIVESHAFTS
DRIVESHAFT SIZE PART # AVAILABILITYSL - 41 X 36” HP2-40-72 special order only - 60 day lead
SL - 41 X 48” HP2-40-73 special order only - 60 day lead
SL - 48 X 36” HP2-40-75 special order only - 60 day lead
SL – 48 X 48” HP2-40-76 limited stock on hand; special order - 60 day lead
SL – 55 X 36” HP2-40-99 special order only - 60 day lead
SL – 55 X 48” HP2-40-100 special order only - 60 day lead
SL – 61 X 36” HP2-40-95 special order only - 180 day lead
SL – 61 X 48” HP2-40-98 special order only - 180 day lead
SL – 71 special order only - 180 day lead
SL – 81 special order only - 180 day lead
RUBBER DAMPENED DRIVELINES FOR THE REDUCTION OF TORSIONAL VIBRATION
\50% OR MORE REDUCTION IN TORSIONAL VIBRATION
800.752.0888CALL
for pricing and availability
of items not listed
2016 ACCESSORY PRODUCTS CATALOG PG 17
ENG
INE
& G
EARH
EAD
CO
MPA
NIO
N F
LAN
GES
BORE
KEY
SIZ
E13
50 &
141
0 SE
RIES
PA
RT #
1480
& 1
550
SERI
ES P
ART
#16
10 S
ERIE
S PA
RT #
1710
SER
IES
PART
#
11/
43-
1-10
13-1
1 1/
81/
43-
1-10
13-2
1 1/
41/
43-
1-10
13-3
1 1/
45/
163-
1-10
13-4
1 3/
85/
163-
1-10
13-5
1 3/
83/
83-
1-10
13-6
1 7/
163/
83-
1-10
13-7
1 1/
23/
83-
1-10
13-8
4-1-
1133
-1
1 5/
83/
83-
1-10
13-9
4-1-
1133
-2
1 3/
43/
83-
1-10
13-1
04-
1-11
33-3
1 7/
83/
83-
1-10
13-1
14-
1-11
33-4
1 7/
81/
23-
1-10
13-1
24-
1-11
33-5
21/
23-
1-10
23-1
4-1-
1133
-65-
1-87
3-1
2 1/
8se
e se
ries
3-1-
1023
-2
with
1/2
key
4-
1-11
33-7
w
ith 5
/8 k
ey5-
1-87
3-2
2 1/
45/
83-
1-10
23-3
4-1-
1133
-8
5-1-
873-
3
2 3/
85/
83-
1-10
23-4
4-1-
1133
-95-
1-87
3-4
2 7/
165/
83-
1-10
23-5
4-1-
1133
-10
5-1-
873-
56-
1-12
53-1
2 1/
25/
83-
1-10
23-6
4-1-
1143
-15-
1-87
3-6
6-1-
1253
-2
2 3/
45/
83-
1-10
23-7
4-1-
1143
-25-
1-87
3-7
6-1-
1253
-3
2 7/
83/
4H
P2-4
0-78
HP2
-40-
79
2 15
/16
3/4
4-1-
1143
-35-
1-87
3-8
6-1-
1253
-4
33/
44-
1-11
43-4
5-1-
873-
96-
1-12
53-5
3 3/
87/
8H
P2-4
0-80
3 1/
27/
84-
1-11
43-5
5-1-
883-
16-
1-12
53-6
3 15
/16
15-
1-88
3-4
6-1-
1253
-7
41
5-1-
883-
3
PG 18 HUSKER POWER PRODUCTS
DRIVE LINE & COMPANION FLANGE SPECS
2016 ACCESSORY PRODUCTS CATALOG PG 19
POWER TAKE-OFF CLUTCHES
APPLICATION PART #
ROCKFORD STYLE OVER CENTER PTO CLUTCH
SAE 5-7 1/2 Single Plate HP2-40-17
SAE 4-10 Single Plate HP2-40-19
SAE 3-10 Single Plate* HP2-40-16
SAE 3-11 1/2 Single Plate* HP2-40-02
SAE 3-11 1/2 Single Plate Metallic 4-34511
SAE 3-11 1/2 Two Plate HP2-40-57
SAE 2-11 1/2 Single Plate HP2-40-01
SAE 2-11 1/2 Two Plate HP2-40-11
SAE 1-14 Single Plate (side load) HP2-40-22
SAE 1-14 Single Plate (In-line load) HP2-40-84
SAE 1-14 Two Plate HP2-40-24
SAE 1-14 Three Plate HP2-40-25
GAS ENGINE PTO UNITS
Chevy/GM Most Engines (41 Flange) 181, 262, 350, 454
1050
Chevy/GM Most Engines (41& 48 Flange) 181, 262, 350, 454, 496
1051
Chevy/GM Most Engines -2 Bearing HD (41& 48 Flange) 181, 262, 350, 454, 496
1051AHD
Ford Engines w/ Industrial Housing (41 Flange) 300, 428, 460
1030
Ford Engines w/ Industrial Housing (48 Flange) 300, 428, 460
1030A
GAS ENGINE SIDE LOAD BELT PTO UNITSAdditional Sizes for all Clutch Models maybe Available FOB Manufacturer
Chevy/GM Most Engines 181, 262, 350, 454, 496
1250
300 Ford Engines w/ Industrial Housing
1230
460 Ford Engines w/ Industrial Housing
1240
Replacement parts are available for above PTO’S.
800.752.0888CALL
for pricing and availability of items not listed
* PLEASE NOTE Detailed parts breakdowns on
following pages
PG 20 HUSKER POWER PRODUCTS
GEAR REDUCTION CLUTCH ASSEMBLIES
DESCRIPTION STARTING PRICE FOR SINGLE DISCTAYLORIA SINGLE OUTPUT
Ratios for 3 standard speeds 1800, 2150, 2400 RPMFitting SAE #4, #3, #2, & #1 Bell HousingsMechanical Operated Clutches: 10”, 11 1/2” SP, 11 1/2” DPOutput Options: (540, 1 3/8”-6) (1000, 1 3/8”-21) (1000, 1 3/4”-20)
DOUBLE OUTPUT
Ratios for 3 standard speeds 1800, 2150, 2400 RPMFitting SAE #4, #3, & #2 Bell HousingsMechanical Operated Clutches: 10”, 11 1/2” SP, 11 1/2” DP
GRA SINGLE
8 Different RatiosFitting SAE #5, #4, & #3 Bell HousingsMechanical Operated Clutches: 6 1/2”, 7 1/2”, 8” & 10”Output Options: (540, 1 3/8”-6) (1000, 1 3/8”-21)
Please call for more options and with specific details on engine. Availability is normally 2-4 week lead time.
HOUSING: SAE #3CLUTCH: 10” HE (SINGLE PLATE)APPLICATION: SIDE LOAD OR IN-LINE
Housing: SAE #3Clutch: 11.5” HE (Single Plate) Power Take-OffApplication: Side Load or In-Line 434510AM
drwng# 434510AM2006
1 Bell Housing 204245AM 12 Name Plate 233863AM 14 Bolt 206092AM 25 Grease Fitting 260843AM 16 Jam Nut 204751AM 17 Grease Fitting 260843AM 18 Drive Shaft 206235AM 19 Main Bearings 307567AM 210 Bearing Retainer 205710AM 111 Adjusting Lock 205368AM 1
12 Lock Bolt 203061AM 113 Lock Washer 207227AM 114 Cross Shaft 206431AM 115 Woodruff Key 204536AM 217 Yoke Sub Assy 309611AM 120 Shifting Lever 308365AM 1
Sub Assembly24 Output Key 204474AM 125 Pilot Bearing 236739AM 126 Nut 204715AM 1
27 Locking Washer 207232AM 128 Clutch Key 204495AM 132 Grease Tube 209570AM 133 Grease Fitting 207954AM 2
(cross shaft)78 Headless Setscrw 206116AM 1
(not shown)79 Clutch Assembly 410928AM 1
(see page 2)
Ref # Part Name Part # Qty Ref # Part Name Part # Qty Ref # Part Name Part # Qty
2016 ACCESSORY PRODUCTS CATALOG PG 21
NACD CLUTCH KIT BREAKDOWN434510AM (HP2-40-02)
HOUSING: SAE #3CLUTCH: 11.5” HE (SINGLE PLATE)APPLICATION: SIDE LOAD OR IN-LINE
REFERENCE# PART # DESCRIPTION1 2-04245 Bell Housing
5 2-60843 Grease Zerk
6 2-04751 Jam Nut
7 2-60843 Grease Zerk
8 2-06235 Driveshaft
9 3-07567 Main Bearing (2 required)
10 2-05710 Bearing Retainer
11 2-05368 Adjusting Lock
14 2-06431 Cross Shaft
15 2-04536 Woodruff Key (2 required)
17 3-09611 Release Yoke
18 2-03062 Bolt (2 required)
20 3-08365 Shifting Lever
25 5306WS Pilot Bearing (2-07431)
26 2-04715 Nut
27 2-07232 Locking Washer
32 2-09570 Grease Hose
69 2-60843 Grease Fitting (2 required)
79 4-10928 Clutch Pack
PG 22 HUSKER POWER PRODUCTS
NACD CLUTCH KIT BREAKDOWN410928AM (HP2-40-02)
REFERENCE# PART # DESCRIPTION79 4-10928 Clutch Pack
109 2-02986 Clutch Body
110 2-03565 Facing Plate (1 piece)
110 2-03563 Facing Plate (3 piece)
112 2-05504 Pressure Plate
113 2-05821 Adjusting Ring
125 2-06566 Release Sleeve
127 3-33811 Release Bearing
132 3-09226 Sleeve & Bearing Asy
146 2-05996 Wear Ring
935 2-34499 Single Plate Drive Ring
2-05865 Double Plate Drive Ring
412-436 Use Clutch Kit 3-32920 or see following pages for clutch kit breakdown
* 3-32920 Clutch Kit
CLUTCH MODEL: 11.5” HE (SINGLE PLATE)FRICTION MATERIAL: ORGANICRELEASE BEARING TYPE: BRONZE COLLAR
Housing: SAE #3Clutch: 10” HE (Single Plate) Power Take-OffApplication: Side Load or In-Line 436003AM1
drwng# 436003AM2004
1 Bell Housing 204245AM 12 Name Plate 233863AM 14 Bolt 206092AM 25 Grease Fitting 260843AM 16 Jam Nut 204751AM 17 Grease Fitting 260843AM 18 Drive Shaft 229243AM 19 Main Bearings 307567AM 2
10 Bearing Retainer 205710AM 111 Adjusting Lock 205368AM 1
12 Lock Bolt 203061AM 113 Lock Washer LC100533 114 Cross Shaft 206431AM 115 Woodruff Key 204536AM 217 Yoke Sub Assy 309611AM 120 Shifting Lever 308365AM 1
Sub Assembly24 Output Key 204475AM 125 Pilot Bearing 100877AM 126 Nut 204715AM 1
27 Locking Washer 207232AM 128 Clutch Key 204493AM 132 Grease Tube 209570AM 133 Grease Fitting 207954AM 2
(cross shaft)56 Bearing Spacer 206814AM 1
(not shown)78 Headless Setscrw 206116AM 1
(not shown)79 Clutch Assembly 410903AM 1
(see page 2)
Ref # Part Name Part # Qty Ref # Part Name Part # Qty Ref # Part Name Part # Qty
2016 ACCESSORY PRODUCTS CATALOG PG 23
NACD CLUTCH KIT BREAKDOWN436003AM (HP2-40-16)
REFERENCE# PART NUMBER DESCRIPTION1 2-04245 Bell Housing
5 2-60843 Grease Zerk
6 2-04751 Jam Nut
7 2-60843 Grease Zerk
8 2-29243 Driveshaft
9 3-07567 Main Bearing (2 required)
10 2-05710 Bearing Retainer
11 2-05368 Adjusting Lock
14 2-06431 Cross Shaft
15 2-04536 Woodruff Key (2 required)
17 3-09611 Release Yoke
18 2-03062 Bolt (2 required)
20 3-08365 Shifting Lever
25 5306WS Pilot Bearing (2-07431)
26 2-04715 Nut
27 2-07232 Locking Washer
32 2-09570 Grease Hose
69 2-60843 Grease Fitting (2 required)
79 4-10903 Clutch Pack
HOUSING: SAE #3CLUTCH: 10” HE (SINGLE PLATE)APPLICATION: SIDE LOAD OR IN-LINE
NACD CLUTCH KIT BREAKDOWN410903AM (HP2-40-16)
CLUTCH MODEL: 10” HE (SINGLE PLATE)FRICTION MATERIAL: ORGANICRELEASE BEARING TYPE: BRONZE COLLAR
REFERENCE# PART NUMBER DESCRIPTION79 4-10903 Clutch Pack
109 2-02978 Clutch Body
110 2-03561 Facing Plate (1 piece)
110 2-03560 Facing Plate (3 piece)
112 2-05507 Pressure Plate
113 2-05821 Adjusting Ring
125 2-06566 Release Sleeve
127 3-33811 Release Bearing
132 3-09226 Sleeve & Bearing Assembly
136 3-08812 Pressure Plate Assembly
146 2-05996 Wear Ring
935 2-05848 Drive Ring
412-436 Use Clutch Kit 3-32920 or see following pages for clutch kit breakdown
* 3-32920 Clutch Kit
PG 24 HUSKER POWER PRODUCTS
Clutch Model: 10” HE, 11.5” HE & 11.5” HE (DP) Clutch Component Kit332920AM
drwng# 332920AM2007
412 Lever Spring 209558AM 1413 Lever 204551AM 3414 Clevis Pin 204801AM 3415 Retaining Ring 205896AM 3417 Lock Bolt LC100523 1418 Lock Washer LC100534 1419 Adjustment Lock 204689AM 1430 Link 204651AM 6431 Clevis Pin 204800AM 3432 Retaining Ring 205897AM 3433 Clevis Pin 204800AM 3434 Retaining Ring 205897AM 3
436 Sep. Spring (short) 207058AM 3436 Sep. Spring (long) 207060AM 3437 Roll Pin 205040AM 3
Ref # Part Name Part # Qty Ref # Part Name Part # Qty
2016 ACCESSORY PRODUCTS CATALOG PG 25
NACD CLUTCH KIT BREAKDOWN332920AM
REF # PART NAME PART # QTY 412 Lever Spring 2-09558 1
413 Lever 2-04551 3
414 Clevis Pin 2-04801 3
415 Retaining Ring 2-05896 3
417 Lock Bolt 2-03122 1
418 Lock Washer 2-07295 1
419 Adjustment Lock 2-04689 1
430 Link 2-04651 6
431 Clevis Pin 2-04800 3
432 Retaining Ring 2-05897 3
433 Clevis Pin 2-04800 3
434 Retaining Ring 2-05897 3
436 Sep. Spring (short) 2-07058 3
436 Sep. Spring (long) 2-07060 3
437 Roll Pin 2-05040 3
CLUTCH MODEL: 10” HE, 11.5” HE & 11.5 HE (DP)
DRIVE PLATE, AUXILIARY PULLEY & FLEX PLATES
PART # DESCRIPTIONDRIVEPLATE
HP2-40-15 7.5”SAE x WL 41
3020 8”SAE x WL 41
HP2-40-09 10” SAE x WL 41 & 48
HP2-40-10 11.5” SAE x WL 41 & 48
HP2-40-49 11.5” SAE X WL 61 & 71
HP2-40-31 14” SAE X WL 61 & 71
3090 350-454 Chevy 12” Clutch WL 41 & 48
PULLEY (AUXILIARY)
2108 181 Chevy (6.8” Dia.)
2109 262 & 350 Chevy (Serpentine)(7.0” Dia.)
2111* 350 Chevy (w/ center ring) (*7.0” Dia 2 B grooves on the inside of pulley)
2114 454 Chevy (7.0” Dia on Aux.)
2116 496 Chevy (7.0” Dia. on Aux.)
2012 300 Ford (6.8” Dia. on Aux.)
2022 460 Ford (7.0” on Aux.)
HP2-40-06A 6BB/6BD1/6BG1 Isuzu (7.625” on Aux.)
HP2-40-52 6SD1 Isuzu (7.4” on Aux.)
HP2-40-83 4HK1 Isuzu (6.5” on Aux.)
HP2-40-88 4JJ1 Isuzu w/ keyed crank pulley(7.0” on Aux.) Must replace bolt & washer when serviced
HP2-40-88A 4JJ1 Isuzu w/ bolted crank pulley (7.0” on Aux.) Must replace bolt & washer when serviced
HP2-40-81 6.8” 41 Series; Pulley mounts between companion flange & driveline
HP2-40-82 6.8” 48 Series; Pulley mounts between companion flange & driveline
(Other pulleys are available for Perkins, John Deere, IH, etc. Please call for pricing.)BOWEX FLEX PLATES & HUBS
HP2-40-39A SAE 7.5 Fly Wheel Flex 42 Plate
HP2-40-39B 15 Tooth Spline Hub for Flex 42 Plate
HP2-40-40 1 Keyed Hub for Flex 42 Plate
HP2-40-51 7/8 x 13 tooth Hub for Flex 42
HP2-40-58 7/8 x 1/4 Keyed Hub for Flex 42
HP2-40-54 SAE 10 Fly Wheel Flex 48 Plate & 13Tooth 7/8 Hub
HP2-40-55 Bowex Pump Mount SAE #4 2 & 4 Bolt “B” Plate
HP2-40-38 Bowex Pump Mount SAE #5 2 & 4 Bolt “B”PG 26
LIMA MAC IRRIGATION GENERATORS480 VOLT, 3 PHASE, 2 BEARING TYPE
KW PART NUMBER10 HP2-70-02
12 HP2-70-03
15 HP2-70-04
20 HP2-70-06
25 HP2-70-37
Generators are FOB Hastings, Nebraska or shipped direct from factory, prepaid with lead time. Other LIMA MAC and Marathon generators are available.
800.752.0888CALL
for pricing and availability of items not listed
2016 ACCESSORY PRODUCTS CATALOG PG 27
ENGINE RADIATORS & COOLING PACKAGES
APPLICATION PART #4BG1 Crated Radiator 800865-4Z
4BG1 Radiator Kit w/ Fan HP1-25-30C KIT
4BG1 Radiator Kit w/o Fan HP1-25-30 KIT
6BG1 Crated Radiator 800865-6Z
6BG1 Radiator Kit w/ Fan HP1-25-15C KIT
6BG1 Radiator Kit w/o Fan HP1-25-15 KIT
6BD1 Radiator Kit w/ Fan HP1-25-15DC KIT
181 Crated Radiator 800340-Z
181 Radiator Kit w/ Fan TPI1809A
262 Crated Radiator 800341-Z
262 Radiator Kit w/ Fan TPI1813A
350 Crated Radiator 800341-Z
350 Radiator Kit w/ Fan & Serpentine Belts TPI1811A
350 Radiator Kit w/ Fan & V- Belts TPI1811A OLD
454 Standard Crated Radiator 800342-Z
454 Standard Radiator Kit w/ Fan TPI1812A
454 Heavy Duty Crated Radiator 800343-Z
454 Heavy Duty Radiator Kit w/ Fan TPI1812E
496 Crated Radiator 800343-Z
496 Radiator Kit w/ Fan TPI1814
460 Ford Crated (while supplies last) 800370B-Z
Crated Radiators
include:Core Guard,
Finger Guard & Shroud
Diesel Radiator Kits include:
Crated Radiator, hoses, mounting
brackets, hardware kits,
fan & spacers if (stated w/ fan)
Gas Radiator Kits include:
Crated Radiator, hoses, mounting
brackets, hardware kits,
Fan, fan spacers, belts and
alternator pulley if required.
Kits may not fit perfectly due
to different engine frames
and set ups
PART # PRESSURE UP TO
CONTINUOUS H.P.
H-424 150 psi 40
H-430 150 psi 75
H-440 150 psi 95
H-448 150 psi 135
H-460 150 psi 200
BLU RIVER HEAT EXCHANGERS
Complete Engine Coolers available. Please call for pricing.
800.752.0888CALL
for pricing and availability
of items not listed
PG 28 HUSKER POWER PRODUCTS
INDUSTRIAL GAS ENGINE PLUG WIRES
PART # APPLICATIONTPI2343 181 Non Certified
TPI2322 262 Chevy
TPI2333 305,350,454, 535 Chevy
TPI2334* 496/8.1L Chevy
12074074 Chevy Coil Wire
TPI2324 300 Ford (Std.) w/ coil wire
TPI2325 300 Ford (HEI) w/ coil wire
TPI2328 460 (Std.) w/ coil wire
TPI2329 460(HEI) w/ coil wire
TPI2340** Suppression Core 350,454 Chevy
TPI2341** Suppression Core 300 Ford (HEI)
TPI2342** Suppression Core 460 Ford (HEI)
* Double Silicone insulated jacket with a spiro bound core
** Suppression Core wire sets will cause less interference with electrical equipment. Great for applications with sensitive electronics.
PART # APPLICATION101481 3.0L Certified
only (Coil Wire not included)
103827 3.0L Coil Wire
TPI2335* 262/4.3L Chevy
TPI2345* 350/5.7L Chevy
TPI2337 496/8.1L/8.8L Chevy
INDUSTRIAL CERTIFIED GAS ENGINES PLUG WIRES
All Certified Engine wire sets are Double Silicone insulated jacket with a spiro bound core. *Marked wire sets come with 90deg or 180deg spark plug boot ends as per application and 180deg LT1 coil ends, sets also include coil wires. These wire sets are made for Husker Power Products, Inc. produced certified engines.
PLEASE NOTEAll wires are double silicone
insulated jacket with a copper wire core unless noted by an *
PG 29
INDUSTRIAL GAS ENGINE EXHAUST MANIFOLDS/HEADERS
PART # APPLICATION5065 262 Chevy
5060 350 Chevy
5010 454 Chevy
5096 496 Chevy
900786 300 Ford
5052 460 Ford
All Headers are steel construction and come unpainted with ship loose stacks.
\5060
350 Chevy
PG 30 HUSKER POWER PRODUCTS
INTAKE & EXHAUST SYSTEM ACCESSORIES
PART # DESCRIPTIONMUFFLERS
86177M 2” ID/OD Muffler
4018STA 2 1/4” Irrigation Muffler
M065071 2 1/2” Inlet Muffler
4318STA 3” In / 3” Out Glass Pak
M080018 3” ID/OD Muffler (fits most Isuzu Industrial Engines)
HP2-35-67 2 1/8” Exhaust Clamp (plated)
HPC225 2 1/4” Exhaust Clamp
HP2-35-34 2 1/2” Exhaust Clamp
HP2-35-06 3” Exhaust Clamp
HD400 4” Exhaust Clamp
(More Exhaust Clamp sizes are available; please call for price and availability)
EXHAUST PIPES
HP1-35-13 2” Turn Out (16” tall)
HP1-35-10 2 1/2” Turn Out (16” tall)
HP1-35-11 3” Turn Out (16” tall)
HP2-35-72 2-1/2” Curved Exhaust Pipe (36”tall)
HP2-35-01 3” Curved Exhaust Pipe (36” tall)
HP2-35-71 4” Curved Exhaust Pipe (36” tall)
(See Mufflers above for Exhaust Clamps)
EXHAUST RAIN CAPS
35225 1 1/2” Rain Cap
HP2-35-53 2” Cushion Type Rain Cap
P270533 2 1/4” Rain Cap
FB0017 2 3/8” Rain Cap
HP2-35-40 2 1/2” Rubber Cushion Rain Cap
HP2-35-28 3” Rubber Cushion Rain Cap
FB0023 3” Rain Cap
HP2-35-24 4” Rain Cap
HP2-35-66 5” Rain Cap
HP2-30-127 6” Rain Cap
AIR INTAKE BONNET
HP2-30-146 Gas Air Cleaner Bonnet (PLASTIC ONLY)
101 Rod and Nut assembly for above Bonnet
2016 ACCESSORY PRODUCTS CATALOG PG 31
PG 32 HUSKER POWER PRODUCTS
EXHAUST PRIMERS
PART NUMBER DESCRIPTION
PROTEK EXHAUST PRIMERS
EP150/225-3 1/2 Exhaust Primer for 3 1/2” Exhaust
EP150/225-3NPT Exhaust Primer for 3” NPT Exhaust
EP250/300-3NPT Exhaust Primer for 3” NPT Exhaust
EP60/90 Exhaust Primer
EP60/90-1 1/4 Exhaust Primer for 1 1/4” Exhaust
EP60/90-1-1/2 Exhaust Primer for 1 1/2” Exhaust
EP60/90-2 1/2 Exhaust Primer for 2 1/2” Exhaust
EP60/90-2 NPT Exhaust Primer for 2” NPT Exhaust
POWER PRIMERS
Model 30 12V Power Primer
\EP 60/90
Exhaust Primer
2016 ACCESSORY PRODUCTS CATALOG PG 33
MANIFOLD PRIMER
PART # DESCRIPTION1000 Vacuum Primer Assembly
MP2000 Vacuum Primer Assembly
1001A Top Cover Assembly
1002A Lower Cover Assembly
1003 Lower Housing
1004 Upper Housing
1005 Bracket (2 required)
1008A Float Assembly
1010A Tie Bolt w/ nuts (3 required)
1011 Upper Cork Gasket
1012 Cork Gaskets (3 required)
1014 Brass Steel Angle Valve
/ 1001A
/ 1003
/ 1005
/ 1010A
/ 1012
/ 1014
\ 1002A
\ 1004
\ 1008A
PG 34 HUSKER POWER PRODUCTS
The above list of engine heaters is now in stock. Many other heaters are available on a special order basis.
110V ENGINE HEATERS
PART # TYPE APPLICATION3308001 Tank 750W Tank Type Heater
3308002 Tank 1000W Tank Type Heater
3308003 Tank 1500W Tank Type Heater
3400017 Magnetic 200W Magnetic Heater
3100098 Frost plug 3CB1 Isuzu
HP2-05-36 Frost plug 3CD1 Isuzu
3100067 Frost plug 3KC1, 3KR1 Isuzu
3100098 Frost plug 3LB1 Isuzu
3100094 Frost plug 3LD1, 3LD2 Isuzu
310-0065 Frost plug 4BB1, 4BD1, 4BG1 Isuzu
3100069 Frost plug 4JB1, 4JG1 Isuzu
3100094 Frost plug 4LC, 4LE1, 4LE2 Isuzu
310-0065 Frost plug 6BB1, 6BD1, 6BG1 Isuzu
3100068 Frost plug C240 Isuzu
8602220 Frost plug E120, 6RB1 Isuzu
3308003 Tank 6SA1 Isuzu
3308003 Tank 6HK1 Isuzu
3500151 Frost Plug 4HK1
\HP2-05-36
3CD1 Isuzu
\3308003
1500W tank type heater
800.752.0888CALL
for pricing and availability of items not listed
2016 ACCESSORY PRODUCTS CATALOG PG 35
THROTTLE CABLES & PARTS
PART # DESCRIPTION
CABLES
HP2-15-01 60” Throttle Cable w/ Vernier Control Head (threaded end)
HP2-15-02 48” Throttle Cable w/ Vernier Control Head (threaded end) (4BD, 4BG, 6BD, 6BG)
HP2-15-05 Throttle Cable (CAT) (threaded end 10x 32 machine screw)
HP2-15-06 Throttle Cable (CASE) (wire end)
HP2-10-07 84” Kill Cable (wire end)
R09D3.5X06 6ft Throttle Cable w/ T handle (wire end)
VCGTX06 * 6ft Throttle Cable w/ Vernier Control Head (wire end)
VCGTX10 * 10ft Throttle Cable w/ Vernier Control Head (wire end)
VCGTX15 * 15ft Throttle Cable w/ Vernier Control Head (wire end)
*Longer Lengths are available.
CABLE PARTS
HP2-15-11A Vernier Control Head (for HP2-15-XX throttle cables above)
HP2-15-11B Rubber Boot (red) for HP-15-11A
VCGTHO Vernier Control Head for VCG Cables
HP2-00-125 Wire Stop Kit
HP2-15-03 Clevis 1/4” Throttle CTR
HP2-15-07 Swivel Cable Stop (used on HP2-10-07)
HP2-15-08 Cable Clip (used on HP2-10-07)
1548 Throttle Stop “Bullet”
\R09D3.5X06
6ft Throttle Cable w/ T handle (wire end)
\VCGTX06
6ft Throttle Cable w/ Vernier Control Head (wire end)
PG 36 HUSKER POWER PRODUCTS
ENGINE OIL DRAIN VALVES
PART # SIZE DESCRIPTION
OIL DRAIN VALVES
FG7BN M22-15 3CD1
F101N 1/2” – UNF
F103N 12mm-1.25
F104N 18mm-1.5 Fits Most B-Series Cummins
F105N 20mm-1.5 Fits Most Isuzu
F106N 14mm -1.5 460 Ford
F107N 12mm-1.75 ’95 & up 454
F108N M16-1.5 3CA/3CB
F109N 12mm-1.5
F110N 3/8” Pipe
T200N NPT 1-12
T201N NPT 3/4” -1/4
T202N NPT 1/2” 454 Power Max
T203N 1”-18 UNF
T204N 3/4”-16 UNF Caterpillar, Ford Diesel, most Perkins
T205N 1 1/8”-12mm UNF
T206N 7/8”-14 UNF
T207N 26mm-15
T208N 7/8”-18 UNF
OIL PAN ADAPTERS
HP2-00-175 12mm-1.75 x 1/2” NPT Most Chevy Engines
HP2-00-176 Gasket Gasket for HP2-00-175
HP2-00-152 22mm-1.5 x 1/2” NPT
HP2-00-153 Gasket Gasket for HP2-00-152
HP2-00-154 16mm-1.5 x 1/2” NPT
HP2-00-155 Gasket Gasket for HP2-00-154
HP2-00-172 14MM-1.5 x 1/2” NPT
HP2-00-173 Gasket Gasket for HP2-00-173
HP2-00-47 20mm-1.5 x 1/2” npt
HP2-00-50 Gasket Gasket for HP2-00-47
HP2-00-47A 24mm-1.5 x 1/2” npt
HP2-00-50A Gasket Gasket for HP2-00-47A
HP2-00-01 1/2” NPT x 30” Drain hose (1/2” male NPT on both ends)
N-SERIES valve (as pictured above) is equipped with a nipple to enable the operator to attach a hose.
800.752.0888CALL
for more sizes,
pricing and availability.
2016 ACCESSORY PRODUCTS CATALOG PG 37
DRIPPER REGULATORS & OIL ACCESSORIES
PART NUMBER DESCRIPTION
DRIPPER AND TANK COMPONENTS
82124033 Dripper Regulator
81963365 Dripper Tank
82124025 Shut Off Valve
PT24044 1/4” Dripper Hose
68X4 Compression Fitting 1/4 Tube OD X 1/8 NPT
60X4 Compression Sleeve 1/4”
82124058 Dripper Lower Gasket
82124066 Dripper Top Gasket
82124041 Regulator Glass
SIGHT GAUGES
B1144-14 Sight Gauge, 4” (vented as shown above)
B1144-14S Sight Gauge, 4” (open top for 1/4” NPT Nipple)
B-1144-23 Sight Gauge, 5”
B-1150-5 Sight Gauge, 6” with 90° long elbow
B2577-11 Sight Gauge, 3 1/2” with 90° inlet
Replacement gaskets also available
\VENTED SIGHT GAUGE
\ 81963365
Dripper Tank
\82124033
Dripper Regulator
PG 38 HUSKER POWER PRODUCTS
ENGINE TRAILERS
PART # DESCRIPTIONTPI2040 6’ Engine Trailer with 2 Mounting Rails
TPI2041 7’ Engine Trailer with 2 Mounting Rails
TPI2042 8’ Engine Trailer with 2 Mounting Rails
TPI2045 10’ Engine Trailer with 2 Mounting Rails
HP1-20-27 Generator Bracket Diesel Standard
TPI2037A Generator Bracket - Trailer Side Mount
TPI2038 Generator Bracket – T-L
TPI2039 Generator Bracket - Rear Mount
TPI2036 Generator Bracket - Belly Mount
TPI2035 Trailer Leg (less bracket)
TPI2034 Trailer leg Bracket
TPI2033 Extra Mount Rail
TPI2030 Axle Less Wheels & Tires
TPI2030A Axle with Wheels & Tires
91260 Trailer Jack w/ Foot Front Mount
91215 Trailer Jack Swivel w/ Foot
TPI 550 Telescoping Engine Stands
Trailers are priced unassembled, FOB Hastings, NE.
PLEASE NOTEThese trailers are for off-highway use only.
2016 ACCESSORY PRODUCTS CATALOG PG 39
ENGINE SHELTERS
PART # DESCRIPTIONEngine Shelter (unassembled)
Includes 2 Bows, 4 sheets, 26GA sheet metal & 1 Bolt Package
Bows Extra Bow
Extra Sheet Sheet of 26GA Sheet Metal
Bolt Package Hardware for 1 Engine Shelter
HP2-10-01 Bolt Down Base
HP2-10-01A Cast In Place Base
P8101-723 Wedge Anchor Bolt (not included in bolt package)
PLEASE NOTEHusker Power Products recommends
all electronic controlled engines have a shelter over it.
\144” D
\93” H
\96” W
\67” H
PG 40 HUSKER POWER PRODUCTS
Important Notice Regarding Product Repairs and Warranty Claims
In order to provide you with the best service possible and to expedite all product repairs and warranty claims, we are changing the processes required to complete the repair or warranty claim. This will require certain actions and information on your part. Partial details follow. For complete details please contact your Murphy Inside Sales Representative.
WR Number: A Warranty/Repair Return Authorization Number (WR#) will be required prior to all product returns. This number will allow both of us to track the product and to expedite processing of your request. Simply contact our Inside Sales to request this number. They will ask certain questions that will identify your exact request so that we can fully comply. They will also advise you of certain procedural changes or conditions that may apply to your request, as outlined below.
Complaint/Request Details: Effective January 1, 2005, Warranty claims will require a detailed explanation of the problem or complaint so that we can directly address your concerns. A large percentage of times we are unable to find a problem with the product because we don’t know the details of your complaint, and we thus don’t know what to look for. We evaluate the product against our specifications, but that may not address your complaint. This explanation will be required for Warranty requests in order to receive the return authorization (WR#). This explanation is also recommended for Repairs but is not required. See below for Repairs.
Evaluation Fee: Effective January 1, 2005 we will initiate an Evaluation Fee to cover certain costs associated with diagnosing problems, or suspected problems, with certain products. Your Murphy Sales Rep will advise you of this charge, and when it applies, when you request the WR#. For example, if our evaluation does not support a Warranty Claim, the customer will be asked to pay the fee. However, the fee can be applied to the cost of repair or against the purchase of a new unit. Likewise the fee can be applied to the cost associated with a non-warranty repair. If our evaluation supports the Warranty Claim, the fee will be waived. Also see Repairs below.
Warranty Claim: » Provide detailed explanation of the problem and why Warranty is claimed. Immediate replacement prior to our evaluation will
require that the customer purchase a new unit. If the warranty claim is validated, a credit will be issued against the new unit purchased. A customer purchase order is required prior to replacement.
» Evaluation fee may apply. If applicable, the fee may be applied to repairing the unit or to the purchase of a new unit.
Repairs (Non-Warranty): » Contact Murphy to receive WR#
» Some products may no longer be accepted for repair. Some, because of their design cannot be repaired, others are uneconomical to repair. In many cases repair parts are/will be available for the customer to make the repair. Your Murphy Sales rep will advise details when the WR# is requested.
» (Preferred but not required) Provide detailed explanation of the problem.
» An estimated repair charge will be available later in 2004 for those products that can be repaired. When an exact cost is required prior to the actual repair, an Evaluation Fee will apply. The fee may be applied toward the final repair cost. A purchase order is required for either the estimated repair charge or the evaluation fee. (Effective date for the Evaluation Fee is January 1, 2005).
» If the actual cost to repair is greater than 65% of the customer’s cost to purchase a new product, we will advise. The customer may then proceed with the repair, purchase a new product, scrap the unit or have it returned as is (at customer’s expense). If the unit is scrapped or returned, an evaluation fee will apply (effective January 1, 2005).
NOTE: The evaluation fee for 2016 is $45 Net (no discount)
Prices are subject to change without notice
MURPHY WARRANTY
2016 ACCESSORY PRODUCTS CATALOG PG 41
2955 West Highway 6 | Hastings, NE 68901
800.752.0888 | 402.463.1531 | 402.463.1313 FAX