2016-2017 Training Catalogue - iasafety.aero Catalog.V.2... · 2016-2017 Training Catalogue Your...

2016-2017Training Catalogue

Your challenges are ours….

1202 - Laford [email protected]

838 Lai Chi Kok road, Kowloon, Hong KongTel : 852 3585 8776

OUR POLICYDear Customers,

People are major actors in the development of your Company and training investments contribute to sustain it.

In this way, IAS believes that people development and continuous learnings are an integral part of the strategic objectives of your Company allowing each people acting in an individual environment or collective one should perform his job with all expected efficiency.

To support and better serve you on the achievement of this aim, IAS can provide a set of End to End training services according to your needs.Starting from Training Institute “Turn Key” solution study, Training Need Analysis development for customized training courses until catalog training ones, we fully commit to provide you flexible training solutions.

To achieve your targets, we apply appropriate learning methods and final assessment to guaranty effectiveness of the learning.Thanks to our training network & in close partnerships with one of the highest French University (POLYAERO-Aix Marseille University), IAS can also provide you a large range of aeronautics graduate trainings (Bachelor, Master…) in which, some of them are fully compliant with International standards such as EASA PART66.

Adaptation to your operational constraints is also important for us, so, each training can be carried out either on short training sessions or longer ones as well either in your facilities or offsite locations with a capacity to carry out them in France.

IAS is a Team of Senior Experts & Engineers ready to serve and support you in your strategic projects, do not hesitate to contact us to exchange and prepare the future…

Your challenges are ours….

Kind regards.

Patrick GOUDOUCEO of IAS

Enquiry : [email protected] : 852 3585 8776

OUR APPROACH« WE CAN PROVIDE PARTICIPATIVE TRAINING SOLUTIONS »

Build your customized training solutions together….

ExperiencesKnowledges

Objectives

Training NeedAnalysis

Training Materials

Training Courses

Assessments


TRAINING PROGRAM Human Factors

Safety Management System (Maintenance)

Safety Management System (Airport)

International Regulatory Legislation

Suspected Unapproved Parts

Continuing Airworthiness Management Organization (CAMO)

Aircraft Airworthiness Review (ARR)

Aircraft Maintenance Organization (AMO)

Technical Maintenance Training Organization (MTO)

Quality & Safety auditor

Occupational Safety & Health (OSH)

Bachelor (PART66-Cat C level) - Aeronautics Pluri-Technics Systems

Master / Management of aeronautics industrial projectsEnquiry : [email protected]

Tel : 852 3585 8776

In aeronautics environments (manufacturing, operation,engineering, maintenance…), Human Factors is the study of howhumans behave physically & psychologically in relation withparticular environments, products & services. As well, in the frameof ICAO, Appendix 19, HF shall be deployed & understood withinaeronautics activities.Learn on yourself, anticipate on the risk and contribute to safety.This training course will provide, also, all answers related to theculture change...

Pre-requisite for implementating Safety Management System (SMS) & deploying Company’s Safety Policy

OBJECTIVES

HUMAN FACTORS

ATTENDEESManagers, Engineering staff, Quality & Safety Managers, all staff involved in Production, Quality Control, test & A/C-ComponentFinal Release to Service…

DURATION

• 1 Day

ORGANIZATION (Maximun: 12 students per classroom)

Inter Company (Promote crossed exchanges) Intra Company (Promote Internal Team Spirit)


INTERNATIONAL REGULATION LEGISLATION

OBJECTIVESLearn on a full picture on International regulation genesis and theimplementation of the International Standards from ICAO up toNational regulations.Understand the principles and the requirements related to globalAirworthiness requirements starting from Design, Production upto Operation, Aircraft Continuing Airworthiness &Maintenance/Repair & Overhaul.Understand the role of each aeronautics actor in the frame of theglobal Aviation Safety improvement thanks to a goodunderstanding about the safety issues communication at all levels.

Pre-requisite to well understand how ICAO SARPs are translatedinto National Civil Aviation Regulation

Training Level 1 comply with EASA PART66 – Module 10 standardTraining Level 2 is familiarization

ATTENDEESTop Managers, Managers, Quality & Safety Managers, all Management staff involved within Design, Production, Operation, Continuing Airworthiness & Maintenance and Approvals …

DURATION

4 Days (L1) 1 Day (L2)




SAFETY MANAGEMENT SYSTEM (MAINTENANCE)

OBJECTIVES

Learn on Safety culture in the maintenance environment,understand how to implement a Safety Management Systemincluding the change management and risk management cultureUnderstand how to build-up a SMS process and its communicationplan.

Note: Has to be associated to Human Factor Training course

Pre-requisite for implementating and sustaining a SafetyManagement System (SMS) as well as to support the Aircraft

Maintenance Organization’s Safety PolicyTraining Level 1 including Work Shop session

Training Level 2 is theoretical session

DURATION




ATTENDEESManagers, Quality & SafetyManagers, Suppliers and all staff involved within Production, ContinuingAirworthiness, Maintenance and logistics…


SAFETY MANAGEMENT SYSTEM (AIRPORT)

OBJECTIVES

Learn on Safety culture in an Airport environment, understandhow to implement a Safety Management System including thechange management and risk management cultureUnderstand how to build-up a SMS process and its communicationplan.

Note: Has to be associated to Human Factor Training course

Pre-requisite for implementating and sustaining a SafetyManagement System (SMS) as well as to support the Airport’s

Safety PolicyTraining Level 1 including Work Shop session

Training Level 2 is theoretical session

DURATION




ATTENDEESManagers, Quality & SafetyManagers, and all staff involvedwithin Airport activities on ground supports, logistics, Maintenance, infrastrutures, Service providers…


SUSPECTED UNAPPROVED PARTS (SUPs)

OBJECTIVES

Learn on how to support safety with a focus on the anticipation /detection / investigation & reporting on suspected parts orsituation providing risk on bogus partsIncrease supply chain process or internal operational one in orderto minimize risk on fitting Bogus parts on Aircraft.Aware supplier & operational staff that Bogus parts exist andgenerate huge flight safety risk.

Complementary for implementating Safety Management System (SMS) and required for supporting Maintenance approvals.Contribute to the Company’s Safety Policy as well to Supply

Chains securisation

DURATION

0,5 Day



ATTENDEESManagers, Quality & SafetyManagers, Suppliers and all staff involvedwithin Production, ContinuingAirworthiness, Maintenance, Warehousesand Supply Chains….


CONTINUING AIRWORTHINESS MANAGEMENT ORGANIZATION (CAMO)

OBJECTIVESContinuing Airworthiness Management in one trigger to bemanaged to secure flight safety as well to keep under control theAircraft configuration & Airworthiness status.Aircraft fleet is a Company asset with financial & technical value tobe secured.Learn on how to organize, manage under efficient processes,control & monitor through an efficient Quality Assurance Systemcontribute to preserve these assets, the Company performance &the safety at the end.Associate at these targets a learning on International aeronauticregulation such as EASA / FAA standards or National onescomplete the global knowledge to comply with.

Regulation legislation training course can be a pre-requisite to have a better view on the global Airworthiness concept and

environment

DURATION

0,5 Day



ATTENDEESTop Managers involved in CAMOas Accountable Manager, Quality& Safety Managers, Airwothiness Managers and staff…


AIRCRAFT AIRWORTHINESS REVIEW (AAR)

OBJECTIVESContinuing Airworthiness Management in one trigger to bemanaged to secure flight safety as well to keep under control theAircraft configuration & Airworthiness status.Aircraft fleet is a Company asset with financial & technical value tobe secured.Learn on how to perform an Aircraft Airworthiness Review &make relevant records contribute to preserve these assets, theCompany performance & the safety at the end.Associate at these targets a learning on Maintenance Programmanagement & implementation according to internationalregulation such as EASA / FAA standards or National onescomplete the global knowledge to comply with.

Continuing Airworthiness training course can be a pre-requisitefor Airwothiness staff involved in Fleet management.

Training Level 1 includes Working Session & AAR practicesTraining Level 2 is theoretical session

DURATION




ATTENDEESQuality & Safety Managers,Airwothiness Managers,Inspectors and Airworthiness staff…


AIRCRAFT MAINTENANCE ORGANIZATION (AMO)

OBJECTIVESAircraft Maintenance Management in one trigger to be managedto secure flight safety as well to contribute for keeping undercontrol the Aircraft configuration & Airworthiness status.Aircraft fleet is a Company asset with financial & technical value tobe secured.Learn on how to organize, manage under efficient processes,control & monitor through an efficient Quality Assurance Systemcontribute to preserve these assets, the Company performance &the safety at the end.Associate at these targets a learning on International aeronauticregulation such as EASA / FAA standards or National onescomplete the global knowledge to comply with

Regulation legislation training course can be a pre-requisite to have a better view on the global aeronautics environment.

Training Level 1 addresses Airworthiness & Quality staffTraining Level 2 addresses familiarization (Top Management)

DURATION

1 Day (L1) 0,5 Day (L2)



ATTENDEESTop Managers involved in AMO as Accountable Manager, Airworthiness Managers, Engineering staff, Quality & Safety Managers, Maintenance Managers… …


TECHNICAL MAINTENANCE TRAINING ORGANIZATION (MTO)

Pre-requisite for implementing a training Centre in accordance with Internation Regulation & standards

Training Level 1 includes Working Session on training projectTraining Level 2 is theoretical session

OBJECTIVESTraining Management in one trigger to support CAMO & AMO toprovide initial qualification training, to maintain thosequalification through refreshing sessions and to extend thosequalifications on additional ratings. Qualifications are consideredas an asset to be followed, monitored & sustained.Learn on how to organize a training centre, manage it underefficient processes, control & monitor through an efficient QualityAssurance System in order contribute to preserve these assets,the Company performance & the safety at the end.Associate at these targets a learning on International aeronauticregulation such as EASA / FAA standards or National onescomplete the global knowledge to comply with.

DURATION




ATTENDEESProject Manager, Universityinstitution Managers, Quality & Safety Managers and all staff involved in the training course developments and management…


QUALITY & SAFETY AUDITOR

General knowledge of aeronautics standard or regulation can bea pre-requisite in order to apply audit approach in a better real

life configuration

OBJECTIVESYour business relies on processes that deliver performant & reliableproducts / Services in a safe environment & culture.Learn on audit process and associated methodology will strength yourCompany to assess & monitor efficiently those processes as well asproducts also.Audit training course provides methodology, develops individual &collective behaviors of auditors as well their analysis & reportingcapacity.Based on a standard or regulation requirements, this training course isperformed on a theoretical approach to acquire the right principlesand on practical exercises reflecting the real life of the auditor in frontof the auditees.

DURATION

3 Days



ATTENDEESAll Managers, Quality orInspection staff involved in theCompany quality monitoring, audit plan implementation and corrective action follow-up


OCCUPATIONAL SAFETY & HEALTH(OSH)

General knowledge about Occupational Safety & Health and contribute to reduce the internal accident risks .Strenght the global Company’s SMS deployment

OBJECTIVESYou want to develop, sustain & manage your internal own OccupationalSafety and Health (OSH) policy & culture providing trainee awareness onergonomics & risk assessment. This training course provides you a largescope multidisciplinary purposes contributing to the people protection andrisk prevention for the Company.The goals of occupational Safety and Health programs include to foster asafe and healthy work environment who might affects all people inside anyworkplace.This training course alternates theoretical sessions providing basis principleon physiological aspect, ergonomics fields, risk identification… and WorkingSession on the field providing practical study cases with Working Groupdebriefs & exchanges.

DURATION

2 Days



ATTENDEESAll Managers, HQSE staff,Quality & Safety or Inspection staff,All people involved in Airport Ground support or others Airport service providers (Ground Handlings, Engineering, …)


BACHELOR (PART 66-Cat C level) / AERONAUTICS PLURI-TECHNICS SYSTEMS

OBJECTIVES

This training is:• Dedicated to answer to aeronautic actors such as Designer,

Manufacturers & Operators, Engineering, Maintenance, TrainingCenters (Support Jobs) and all institutional Civil & Military actors incharge to deploy, sustain & monitor aeronautics regulationsrequiring aeronautics knowledges.

• Compliant with International EASA PART66 standards validatingbasic Training modules

• Carried out in partnership with one highest French Universityproviding graduate trainings (Bachelor)…

• Part of initial agreement process between Customer & FrenchUniversity “Educational Institutes“.

Pedagogical program (Full PART66-Cat C theoric standard):Mechanics (1) Language (2) Aircraft Technologies (3) Aircraft Maintenance (4)Tutored Projects (5) Professional Project (6)

DURATION • (1) 130H• (2) 150H• (3) 280H• (4) 280H• (5) 140H• (6) 490H

ORGANIZATION (Classroom organization on request)


ATTENDEESAll technical staff & profiles suchas mechanics, electronics, aerodynamics…with objectives to work in Engineering, Maintenance or otheraeronautic support functions


MASTER / MANAGEMENT OF AERONAUTICS INDUSTRIAL PROJECTSOBJECTIVESThis training is:

• Dedicated to answer to aeronautic actors such as Designer,Manufacturers & Operators, Engineering, Maintenance, TrainingCenters (Support Jobs) and all institutional Civil & Military actors incharge to deploy, sustain & monitor aeronautics standardsrequiring high aeronautic knowledges.

• Carried out to provide either additional knowledges on specificaeronautic topics or a Master graduation with full modulevalidations providing university diploma.

• Carried out in partnership with one highest French Universityproviding graduate trainings.

• Part of initial agreement process between Customer & FrenchUniversity “Educational Institutes“ for training recognitions.

Pedagogical program :Module 1 : Aeronautics Sciences & Technics (1)Module 2: Aeronautic Maintenance & Project Management (2)Module 3: Aeronautic communication & Management (3)Internships in Aeronautic Company (4)

DURATION • (1) 121H• (2) 223H• (3) 68H• (4) 700H



ATTENDEESAll technical staff & profiles suchas mechanics, electronics, aerodynamics…with objectives to work in Engineering, Maintenance or otheraeronautic support functions



1202 Laford Center, 838 Lai Chi Kok Road, Kowloon, Hong Kong

Tel +852 3585 8776 (HK) +33 1 70 38 24 59 (Paris)

Human Factors

Safety Management System (Maintenance)

Safety Management System (Airport)

International Regulatory Legislation

Suspected Unapproved Parts

Continuing Airworthiness Management Organization (CAMO)

Aircraft Airworthiness Review (ARR)

Aircraft Maintenance Organization (AMO)

Technical Maintenance Training Organization (MTO)

Quality & Safety auditor

Occupational Safety & Health (OSH)

Bachelor (PART66-Cat C level) / Aeronautics Pluri-Technics Systems

Master / Management of aeronautics Industrial projects

OTHERS

2016-2017 Training Catalogue - iasafety.aero Catalog.V.2... · 2016-2017 Training Catalogue Your...

Documents

Transcript of 2016-2017 Training Catalogue - iasafety.aero Catalog.V.2... · 2016-2017 Training Catalogue Your...