2015 ACCESSORY PRODUCTS CATALOG - Husker … · ct425-2-37 impco carburetor ng (mixer&throttle ......

of 40 /40
Call 402.463.1531 / 800.752.0888 for sales and service 2015 ACCESSORY PRODUCTS CATALOG

Embed Size (px)

Transcript of 2015 ACCESSORY PRODUCTS CATALOG - Husker … · ct425-2-37 impco carburetor ng (mixer&throttle ......

  • Call 402.463.1531 / 800.752.0888 for sales and service

    2015 ACCESSORY PRODUCTS CATALOG

  • PG 2 HUSKER POWER PRODUCTS

    RETURN GOODS POLICY

    RETURN MERCHANDISE: An RMA# (Return Goods Merchandise Number) must accompany any items being returned, along with a copy of the original invoice. You will need to call and talk to someone in the Parts Dept. They will be able to tell you what information will be needed to return your item. They will then issue a RMA#. We have, in the past, received packages from UPS with no invoice or information on why an item is being returned. If this occurs we will issue an additional 10% restocking fee along with the normal 20% restocking charge. In our busier season, its easy for these boxes to be set aside and not be taken care of properly; hopefully, this will save any problems with issuing credits and starting warranty claims. Remember, shipping labels need to have the RMA# on it.

    Merchandise shipped and billed over 30 days will not normally be accepted for return.

    The credit will be applied to your account, unless previous arrangements have been made.

    RESTOCKING CHARGES: Merchandise returned will be charged a 20% restocking fee, with the exception of special order items. Some vendors charge us more than 20% and we will have to charge our valued customers accordingly. We have a simple Return Policy, if a RMA# is not issued before you return the goods an additional 10% will be added to the normal 20% fee.

    SPECIAL ORDER ITEMS: A 20% deposit will be required at the time of ordering. The order will not be placed with our vendor until we have received the deposit. This policy will be waived if you have an account in good standing with us. Non-stock items going back to our vendor will be subject to both restock charge and return freight charges.

    All returns are handled on a case by case review.

    Thank you for your cooperation and we look forward to doing business with you this year.

  • PG 32015 ACCESSORY PRODUCTS CATALOG

    TABLE OF CONTENTS

    110V Engine Heaters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33BLU RIVER Heat Exchangers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Certified Gas Engine Carburation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Dripper Regulators & Oil Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Drive Line & Companion Flange Specs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Drive Plate, Auxiliary Pulley & Flex Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Driveshaft Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Driveshafts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Engine & Gearhead Companion Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Engine Oil Drain Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Engine Radiators & Cooling Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Engine Shelters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Engine Trailers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Exhaust Primers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Gear Reduction Clutch Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Industrial Certified Gas Engines Plug Wires . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Industrial Gas Engine Exhaust Manifolds/Headers . . . . . . . . . . . . . . . . . . . . . . . 29Industrial Gas Engine Plug Wires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Intake & Exhaust System Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30LIMA MAC Irrigation Generators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Manifold Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Murphy Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9Murphy Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39NACD Clutch Kit Breakdown. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-24Power Take-Off Clutches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Tachometers and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Throttle Cables & Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Vibra-Damp Resilient Driveshafts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

    800.752.0888CA

    LL

    for pricing and ava

    ilability

    of items not listed

  • PG 4 HUSKER POWER PRODUCTS

    MURPHY PRODUCTS

    PART # DESCRIPTIONL129 Oil Level Gauge

    LM2000 Lube Level Maintainer

    15000238 Bracket for LM2000

    803952A L129 Gaskets

    15000480 L129 Glass & Gasket Kit (replaces plexiglass style)

    15000485 L129 Glass & Gasket Kit

    L150 Water Level Gauge

    5000138 L150 Repair Kit USE L150

    15000107 PS Fitting; 1/4 Tube

    15010167 PS Fitting; 1/4 Hose Barb

    15050910 Case, Body Gasket L150

    SV12 Fuel Solenoid

    SV12-HP Fuel Solenoid (High Pressure)

    SV24 Fuel Solenoid (24 Volt)

    55010141 Coil Only (SV12)

    55010145 Coil Only (SV24)

    CKV2336 Check Valve

    RP2307B Solenoid, 12V

    RP2308B Solenoid, 24V

    RP2309B Solenoid, 12V (14# Pull)

    RP75-12 Rack Puller, 12V, 4FT

    117 Magnetic Switch, 12-24V

    117PH Magnetic Switch, 12-24V

    MS2100 Magnetic Switch

    MS2110 Magnetic Switch

    MS2120 Magnetic Switch

    518APH12V Magnetic Switch, 12V

    518APH24V Magnetic Switch, 24V

    782-1074 Use For 117/518s

    25050547 Dust Boot for Magnetic Switch

    /518PH-12

  • 2015 ACCESSORY PRODUCTS CATALOG PG 5

    MURPHY PRODUCTSCONT

    PART # DESCRIPTION20V2 Vacuum Gauge

    20V3 Vacuum Gauge

    20P-15 Pressure Gauge 0-15

    20P-30 Pressure Gauge 0-30

    20P-50 Pressure Gauge 0-50

    20P-75 Pressure Gauge 0-75

    20P-100 Pressure Gauge 0-100

    20P-150 Pressure Gauge 0-150

    20P7-15 Pressure Gauge, w/ Lock Out

    20P7-30 Pressure Gauge, w/ Lock Out

    20P7-50 Pressure Gauge, w/ Lock Out

    20P7-75 Pressure Gauge, w/ Lock Out

    20P7-100 Pressure Gauge, w/ Lock Out

    20P7-150 Pressure Gauge, w/ Lock Out

    20P7-100-HL Pressure Gauge, w/ Lock Out & High-Low

    20P-75-FS Pressure Gauge, w/ Lock Out & Fail Safe

    PSO421 Pressure Switch

    AT03069 Auto Throttler

    OPLC-A-100 100 Pressure Switch Gauge

    OPLC-A-200 200 Pressure Switch Gauge

    60-0-60 Amp Meter

    VM 12 Volt Meter (12 Volts)

    VM 24 Volt Meter (24 Volts)

    VM600 Volt Meter (600 Volts)

    PB128S Stop Button

    65010258 Start-Run Toggle Switch

    65010082 Diode w/ Pigtail

    65000362 Diode w/ Male Spade

    65010123 Terminal Strip (4 Posts)

    \ 20V3

  • PG 6 HUSKER POWER PRODUCTS

    MURPHY PRODUCTSCONT

    PART # DESCRIPTION20T-250-4 Water Temp Gauge, 4 ft

    20T-250-6 Water Temp Gauge, 6 ft

    20TJD-250-6 John Deere Water Temp Gauge, 6 ft

    20T-250-8 Water Temp Gauge, 8 ft

    20T-250-10 Water Temp Gauge, 10 ft

    20T-250-12 Water Temp Gauge, 12 ft

    20TH-320-4-M10 Air Temp Gauge, 4 ft (160-320)

    20TH-320-6-M10 Air Temp Gauge, 6 ft (160-320)

    20SD-250-1/4 Water Temp Gauge, Direct Mount 1/4

    20SD-250-1/2 Water Temp Gauge, Direct Mount 1/2

    20T-250-4-FS Water Temp Gauge, 4 ft w/ Fail Safe

    20T-250-6-FS Water Temp Gauge, 6 ft w/ Fail Safe

    WHB 3 Gauge Panel (Oil, Temp, Amp & 117)

    WD300LV 2 Gauge Panel-less Valve (SV12)

    30350524 Deluxe 3 Gauge Panel (Diesel) (less hour meter & starter button)

    30350646 Loaded Enclosed Panel (Diesel)

    HP2-05-28 Blank Enclosed Panel

    30090265 Panel 4 Gauge (Gas Engine) (Includes Amp, Oil, Temp, Vacuum)

    12T Timer with Case

    12T Less Case Timer, 12V Less Case

    24T Timer, 24V

    24T Less Case Timer, 24V Less Case

    65000249 Banjo Fitting (Fuel) (14MM x 1/4NPT Female)

    HP2-05-03 Start Button Diesel w/ Rubber Cover

    SWX1240 Start Button, Non-Certified Gas Engine

    9506023BX Key Switch, Certified Gas Engine

    83451601 Key Only, Certified Gas Engine

    31101BX Harness Key Switch, Certified Gas Engine

    \WD300LV

    2 Gauge Panel-less Valve (SV12) \20T SERIES

  • 2015 ACCESSORY PRODUCTS CATALOG PG 7

    MURPHY PRODUCTSELECTRIC GAUGES

    PART # DESCRIPTIONEGS21P-100-12 Pressure Switch Gauge 12V

    EGS21P-100-24 Pressure Switch Gauge 24V

    EG21P-100-12 Pressure Gauge 12V

    ESP-100 Sendig Unit for above Gauges

    EGS21T-250-12 Temp Switchgauge 12V

    EGS21T-250-24 Temp Switchgauge 24V

    EST250/300-X Sendig Unit for Above Gauges

    MUST ALSO PURCHASE APPROPRIATE TEMP ADAPTER**

    10002444** Temp Gauge Adapter (16M x 1.5)

    10050069** Temp Gauge Adapter (3/8 NPT)

    10002442** Temp Gauge Adapter (14M X 1.5)

    10050105** Temp Gauge Adapter (3/4 NPT)

    10050131** Temp Gauge Adapter (1/2 NPT)

    10050167** Temp Gauge Adapter (1/4 NPT)

    60-0-60 Amp Meter

    MT90 Tach, Digital (Mag & Alternator P.U.)

    VM 12 12 Volt Meter

    VM 24 24 Volt Meter

    VM600 600 Volt Meter

    SM10010 Hour Meter

    41789-00 Bracket Hout Meter (SM10010)

    HP2-05-09 Hour Meter (use dampner below)

    HP2-05-13 Dampner for HP2-05-13

    SM10002 Rectangular Hour Meter

    /EG SERIES

  • PG 8 HUSKER POWER PRODUCTS

    MURPHY PRODUCTS32090485 - TIER III PANEL BUILD OF MATERIAL

    800.752.0888CALL

    for pricing and availability of items not listed

    PLEASE NOTEPricing & Parts info on the

    following page

  • 2015 ACCESSORY PRODUCTS CATALOG PG 9

    ITEM # DESCRIPTION PART # QTY.2 Magnetic Switch 12V 518APH12V Voltage Specific

    2 Magnetic Switch 24V 518APH24V Voltage Specific

    3 Key Switch 00000778

    Key Only 00003235

    5 Potentiometer (12V or 24V) 36999967 1

    Knob for Potentiometer PKT70B 1

    6 Toggle Switch TS 2

    7 Bulb 12V 00000029 Voltage Specific (2)

    7 Bulb 24V 00001820 Voltage Specific (2)

    7 Lamp Holder 00000749 2

    8 Red Lens 00000750 1

    9 Amber Lens 00002385 1

    10 Relay 12V 75111 Voltage Specific (4)

    10 Relay 24V 75025 Voltage Specific (4)

    10 Relay Socket 75280 4

    15 Fuse, Blade type 20A 782-1110 1

    16 Fuse, Blade type 30A 782-1112 3

    17 Fuse Holder 00000933 2

    18 Fuse, Glass AGC10 782-1051 3

    23 4 Position Fuse Block 00030870 1

    28 Starter Cut Relay 95J200E 1

    11 Terminal Block 65010125 1

    Diode 65010082 1

    Panel Wiring Harness 78000693 1

    Shock Mounts CM x 1/2 4

  • PG 10 HUSKER POWER PRODUCTS

    TACHOMETERS AND ACCESSORIES

    PART NUMBER DESCRIPTION

    TACHOMETERS

    103656 Alternator P.U. 0-3000 RPM

    103678 Tachometer/Hour Meter Combo, Alternator P.U. 0-3000 RPM

    103736 Magnetic P.U. 0-4000 RPM

    103757 Tachometer/Hour Meter Combo, Magnetic P.U. 0-3000 RPM

    TC9755 Distributor P.U. 0-6000 RPM

    TC9133 Tachometer/Hour Meter Combo, Distributor P.U. 0-6000 RPM

    R8597 Mechanical P.U. 5:1 Ratio, 0-3500 RPM

    R8599 Tachometer/Hour Meter Combo, Mechanical P.U., 5:1 Ratio

    82682 Hand Tach.

    50446D004 Voltage Reducer 12/24 Volt

    TACHOMETER KITS

    5Y4-006 Magnetic P.U. Tachometer and Sensor (3/4 x 2.6)

    Tachometer Pick-Ups

    71544-00 Magnetic Sensor, 5/8 x 1.9

    HP2-55-07 Magnetic Sensor, 3/4 x 2.6

    MOUNTING PLATES

    5757323 Tachometer Mounting Bracket

    /TC9755

    Distributor P.U. 0-6000 RPM

    \TC9133

    Tachometer/Hour Meter Combo

  • 2015 ACCESSORY PRODUCTS CATALOG PG 11

    IMPCO CARBURATION

    PART NUMBER DESCRIPTION

    CARBURETORS

    CA125-52 Impco Carburetor LP/NG (Mixer&Throttle Body)

    CA125M Impco Mixer only

    CA225-94 Impco Carburetor LP (Mixer&Throttle Body)

    CA225M Impco Mixer only (LP)

    225-94 Impco Carburetor NG (Mixer&Throttle Body)

    CT425-2-37 Impco Carburetor NG (Mixer&Throttle Body) w/ 3 Flange

    CT425-2 Impco Carburetor LP (Mixer&Throttle Body) w/ 3 Flange

    CT425M-2 Impco Mixer only

    CONVERTERS

    JB Impco Model JB Vaporizer

    LB Impco Model LB Vaporizer

    EB Impco Model E Vaporizer w/ Blue Spring

    REPAIR PARTS

    AV1-12 LP #16 Valve & Diaphragm Assy. (CA225-94)

    AV1-14 LP & NG Valve & Diaphragm Assy. (CA125-52)

    CV1-12 NG #17 Valve & Diaphragm Assy. (225-94)

    AV1-16-2 LP Valve & Diaphragm Assy. (CT425-2)

    AV1-1637-2 NG Valve & Diaphragm Assy. (CT425-2-37)

    RK-E Repair Kit for Model E

    RK-J Repair Kit for Model J

    RK-L-2 Repair Kit for Model L w/ silicone diaphragm

    7008A-12-O Fuel Solenoid, for LP 12V engines

    454460 Carb Adapter, 4BBL (350-454)

    56 Gasket, intake to carb adapter

    73355G002 Natural Gas Filter Elemental only

  • PG 12 HUSKER POWER PRODUCTS

    CERTIFIED GAS ENGINE CARBURATIONFOR HPPI PRODUCED ENGINES

    PART NUMBER DESCRIPTION

    IEPR

    38901060 IEPR for 3.0L Chevy

    38901059 IEPR for 4.3L Chevy

    38901058 IEPR for 5.7L Chevy

    38901057 IEPR for 8.1L Chevy

    38901133 IEPR for 8.8L Chevy

    MIXER

    32501704 Mixer 3.0L Chevy

    32501774 Mixer 4.3L Chevy

    32501705 Mixer 5.7L Chevy (E330)

    32501690 Mixer 8.1L & 8.8L Chevy (480)

    REPAIR PARTS

    32502216 Asco Valve 3/4 (3.0L)

    39300113 Asco Valve 1 (4.3L - 8.8L)

    106871 Mixer Repair Kit (32501704)

    106823 Mixer Repair Kit (1 x 4.3L-5.7L) (2 x 8.8L)

    32501778 Adapter, Fuel Inlet to Mixer (3.0L-4.3L)

    1139524 Screw for 32501778 (QTY-4)

    32501779 Adapter, Fuel Inlet to Mixer (5.7-8.8L)

    35000674 Screw for 32501779 (QTY-4 )

  • 2015 ACCESSORY PRODUCTS CATALOG PG 13

    DRIVESHAFT SIZE PART #

    SHORT COUPLED DRIVESHAFT ASSEMBLIES

    SC 37 X 9-7/8 9012-SF

    SC 41 X 9-7/8 8134-SF

    SC 48 X 9-7/8 202990-1

    SC 55 X 9-7/8 204249-6

    SC 61 X 9-7/8 906224-1

    FLEXIBLE IRRIGATION DRIVESHAFTS TUBULAR TYPE

    SL - 41 X 24 917785-1

    SL - 41 X 36 917785-2

    SL - 41 X 48 917785-3

    SL - 48 X 24 917786-1

    SL - 48 X 36 917786-2

    SL - 48 X 48 917786-3

    SL - 55 X 24 917787-1

    SL - 55 X 36 917787-2

    SL - 55 X 48 917787-3

    SL - 61 X 24 917788-3

    SL - 61 X 36 917788-1

    SL - 61 X 48 917788-2

    SL - 71 X 36 917789-1

    SL - 71 X 48 917789-2

    Bolt Kit 35-41 series 35B-HWK

    Bolt Kit 48 series 48B-HWK

    DRIVESHAFTS

    WARNING ALL DRIVESHAFTS

    SHOULD BE COVERED WITH SHAFTGUARD TO

    PREVENT INJURY.

    \SHORT COUPLED DRIVESHAFT

    \TUBULAR TYPE

  • PG 14 HUSKER POWER PRODUCTS

    DRIVESHAFT PARTS

    PART #

    U-JOINTS

    1410 Series 5-160X

    1480 Series 5-188X

    1550 Series 5-155X

    FLANGE YOKE

    1410 Series 3-2-159

    1480 Series 3-2-479

    SLIP YOKE

    1410 Series 3-3-508KX

    1480 Series 3-3-1601KX

    DRIVE SHAFT SHEILDS

    10- 18 Adjustable 10-18

    24- 42 Adjustable 24-42

    36 - 54 Adjustable 36-54

    MOUNT HARDWARED INCLUDED ON ALL SIZES

    \SLIP YOKE

    \FLANGE YOKE

    U-JOINT/

  • 2015 ACCESSORY PRODUCTS CATALOG PG 15

    VIBRA-DAMP RESILIANT DRIVESHAFTS

    DRIVESHAFT SIZE PART # AVAILABILTYSL - 41 X 36 HP2-40-72 special order only - 60 day lead

    SL - 41 X 48 HP2-40-73 special order only - 60 day lead

    SL - 48 X 36 HP2-40-75 special order only - 60 day lead

    SL 48 X 48 HP2-40-76 limited stock on hand; special order - 60 day lead

    SL 55 X 36 HP2-40-99 special order only - 60 day lead

    SL 55 X 48 HP2-40-100 special order only - 60 day lead

    SL 61 X 36 HP2-40-95 special order only - 180 day lead

    SL 61 X 48 HP2-40-98 special order only - 180 day lead

    SL 71 special order only - 180 day lead

    SL 81 special order only - 180 day lead

    RUBBER DAMPENED DRIVELINES FOR THE REDUCTION OF TORSIONAL VIBRATION

    \50% OR MORE REDUCTION IN TORISONAL VIBRATION

    800.752.0888CA

    LL

    for pricing and ava

    ilability

    of items not listed

  • PG 16 HUSKER POWER PRODUCTS

    ENG

    INE

    & G

    EARH

    EAD

    CO

    MPA

    NIO

    N F

    LAN

    GES

    BORE

    KEY

    SIZ

    E13

    50 &

    141

    0 SE

    RIES

    PA

    RT #

    1480

    & 1

    550

    SERI

    ES P

    ART

    #16

    10 S

    ERIE

    S PA

    RT #

    1710

    SER

    IES

    PART

    #

    11/

    43-

    1-10

    13-1

    1 1/

    81/

    43-

    1-10

    13-2

    1 1/

    41/

    43-

    1-10

    13-3

    1 1/

    45/

    163-

    1-10

    13-4

    1 3/

    85/

    163-

    1-10

    13-5

    1 3/

    83/

    83-

    1-10

    13-6

    1 7/

    163/

    83-

    1-10

    13-7

    1 1/

    23/

    83-

    1-10

    13-8

    4-1-

    1133

    -1

    1 5/

    83/

    83-

    1-10

    13-9

    4-1-

    1133

    -2

    1 3/

    43/

    83-

    1-10

    13-1

    04-

    1-11

    33-3

    1 7/

    83/

    83-

    1-10

    13-1

    14-

    1-11

    33-4

    1 7/

    81/

    23-

    1-10

    13-1

    24-

    1-11

    33-5

    21/

    23-

    1-10

    23-1

    4-1-

    1133

    -65-

    1-87

    3-1

    2 1/

    81/

    23-

    1-10

    23-2

    4-1-

    1133

    -75-

    1-87

    3-2

    2 1/

    45/

    83-

    1-10

    23-3

    4-1-

    1133

    -85-

    1-87

    3-3

    2 3/

    85/

    83-

    1-10

    23-4

    4-1-

    1133

    -95-

    1-87

    3-4

    2 7/

    165/

    83-

    1-10

    23-5

    4-1-

    1133

    -10

    5-1-

    873-

    56-

    1-12

    53-1

    2 1/

    25/

    83-

    1-10

    23-6

    4-1-

    1143

    -15-

    1-87

    3-6

    6-1-

    1253

    -2

    2 3/

    45/

    83-

    1-10

    23-7

    4-1-

    1143

    -25-

    1-87

    3-7

    6-1-

    1253

    -3

    2 7/

    83/

    4H

    P2-4

    0-78

    HP2

    -40-

    79

    2 15

    /16

    3/4

    4-1-

    1143

    -35-

    1-87

    3-8

    6-1-

    1253

    -4

    33/

    44-

    1-11

    43-4

    5-1-

    873-

    96-

    1-12

    53-5

    3 3/

    87/

    8H

    P2-4

    0-80

    3 1/

    27/

    84-

    1-11

    43-5

    5-1-

    883-

    16-

    1-12

    53-6

    3 15

    /16

    15-

    1-88

    3-4

    6-1-

    1253

    -7

    41

    5-1-

    883-

    3

  • 2015 ACCESSORY PRODUCTS CATALOG PG 17

    DRIVE LINE & COMPANION FLANGE SPECS

  • PG 18 HUSKER POWER PRODUCTS

    POWER TAKE-OFF CLUTCHES

    APPLICATION PART #

    ROCKFORD STYLE OVER CENTER PTO CLUTCH

    SAE 5-7 1/2 Single Plate HP2-40-17

    SAE 4-10 Single Plate HP2-40-19

    SAE 3-10 Single Plate* HP2-40-16

    SAE 3-11 1/2 Single Plate* HP2-40-02

    SAE 3-11 1/2 Single Plate Metallic 4-34511

    SAE 3-11 1/2 Two Plate HP2-40-57

    SAE 2-11 1/2 Single Plate HP2-40-01

    SAE 2-11 1/2 Two Plate HP2-40-11

    SAE 1-14 Single Plate (side load) HP2-40-22

    SAE 1-14 Single Plate (Inline load) HP2-40-84

    SAE 1-14 Two Plate HP2-40-24

    SAE 1-14 Three Plate HP2-40-25

    GAS ENGINE PTO UNITS

    Chevy/GM Most Engines (41 Flange) 181, 262, 350, 454

    1050

    Chevy/GM Most Engines (41& 48 Flange) 181, 262, 350, 454, 496

    1051

    Chevy/GM Most Engines -2 Bearing HD (41& 48 Flange) 181, 262, 350, 454, 496

    1051AHD

    Ford Engines w/ Industrial Housing (41 Flange) 300, 428, 460

    1030

    Ford Engines w/ Industrial Housing (48 Flange) 300, 428, 460

    1030A

    GAS ENGINE SIDE LOAD BELT PTO UNITSAdditional Sizes for all Clutch Models maybe Available FOB Manufacturer

    Chevy/GM Most Engines 181, 262, 350, 454, 496

    1250

    300 Ford Engines w/ Industrial Housing

    1230

    460 Ford Engines w/ Industrial Housing

    1240

    Replacement parts are available for above PTOS.

    800.752.0888CALL

    for pricing and availability of items not listed

    PLEASE NOTEDetailed parts breakdowns on

    following pages

  • 2015 ACCESSORY PRODUCTS CATALOG PG 19

    GEAR REDUCTION CLUTCH ASSEMBLIES

    DESCRIPTIONTAYLORIA SINGLE OUTPUT

    Ratios for 3 standard speeds 1800, 2150, 2400 RPMFitting SAE #4, #3, #2, & #1 Bell HousingsMechanical Operated Clutches: 10, 11 1/2 SP, 11 1/2 DPOutput Options: (540, 1 3/8-6) (1000, 1 3/8-21) (1000, 1 3/4-20)

    DOUBLE OUTPUT

    Ratios for 3 standard speeds 1800, 2150, 2400 RPMFitting SAE #4, #3, & #2 Bell HousingsMechanical Operated Clutches: 10, 11 1/2 SP, 11 1/2 DP

    GRA SINGLE

    8 Different RatiosFitting SAE #5, #4, & #3 Bell HousingsMechanical Operated Clutches: 6 1/2, 7 1/2, 8 & 10Output Options: (540, 1 3/8-6) (1000, 1 3/8-21)

    Please call for more options and with specific details on engine. Availability is normally 2-4 week lead time.

    HOUSING: SAE #3CLUTCH: 10 HE (SINGLE PLATE)APPLICATION: SIDE LOAD OR IN-LINE

  • Housing: SAE #3Clutch: 11.5 HE (Single Plate) Power Take-OffApplication: Side Load or In-Line 434510AM

    drwng# 434510AM2006

    1 Bell Housing 204245AM 12 Name Plate 233863AM 14 Bolt 206092AM 25 Grease Fitting 260843AM 16 Jam Nut 204751AM 17 Grease Fitting 260843AM 18 Drive Shaft 206235AM 19 Main Bearings 307567AM 210 Bearing Retainer 205710AM 111 Adjusting Lock 205368AM 1

    12 Lock Bolt 203061AM 113 Lock Washer 207227AM 114 Cross Shaft 206431AM 115 Woodruff Key 204536AM 217 Yoke Sub Assy 309611AM 120 Shifting Lever 308365AM 1

    Sub Assembly24 Output Key 204474AM 125 Pilot Bearing 236739AM 126 Nut 204715AM 1

    27 Locking Washer 207232AM 128 Clutch Key 204495AM 132 Grease Tube 209570AM 133 Grease Fitting 207954AM 2

    (cross shaft)78 Headless Setscrw 206116AM 1

    (not shown)79 Clutch Assembly 410928AM 1

    (see page 2)

    Ref # Part Name Part # Qty Ref # Part Name Part # Qty Ref # Part Name Part # Qty

    PG 20 HUSKER POWER PRODUCTS

    NACD CLUTCH KIT BREAKDOWN434510AM

    HOUSING: SAE #3CLUTCH: 11.5 HE (SINGLE PLATE)APPLICATION: SIDE LOAD OR IN-LINE

    REFERENCE# PART # DESCRIPTION1 2-04245 Bell Housing

    5 2-60843 Grease Zerk

    6 2-04751 Jam Nut

    7 2-60843 Grease Zerk

    8 2-06235 Driveshaft

    9 3-07567 Main Bearing (2 required)

    10 2-05710 Bearing Retainer

    11 2-05368 Adjusting Lock

    14 2-06431 Cross Shaft

    15 2-04536 Woodruff Key (2 required)

    17 3-09611 Release Yoke

    18 2-03062 Bolt (2 required)

    20 3-08365 Shifting Lever

    25 5306WS Pilot Bearing (2-07431)

    26 2-04715 Nut

    27 2-07232 Locking Washer

    32 2-09570 Grease Hose

    69 2-60843 Grease Fitting (2 required)

    79 4-10928 Clutch Pack

  • Housing: SAE #3Clutch: 11.5 HE (Single Plate) Power Take-OffApplication: Side Load or In-Line 434510AM

    drwng# 434510AM2006

    1 Bell Housing 204245AM 12 Name Plate 233863AM 14 Bolt 206092AM 25 Grease Fitting 260843AM 16 Jam Nut 204751AM 17 Grease Fitting 260843AM 18 Drive Shaft 206235AM 19 Main Bearings 307567AM 2

    10 Bearing Retainer 205710AM 111 Adjusting Lock 205368AM 1

    12 Lock Bolt 203061AM 113 Lock Washer 207227AM 114 Cross Shaft 206431AM 115 Woodruff Key 204536AM 217 Yoke Sub Assy 309611AM 120 Shifting Lever 308365AM 1

    Sub Assembly24 Output Key 204474AM 125 Pilot Bearing 236739AM 126 Nut 204715AM 1

    27 Locking Washer 207232AM 128 Clutch Key 204495AM 132 Grease Tube 209570AM 133 Grease Fitting 207954AM 2

    (cross shaft)78 Headless Setscrw 206116AM 1

    (not shown)79 Clutch Assembly 410928AM 1

    (see page 2)

    Ref # Part Name Part # Qty Ref # Part Name Part # Qty Ref # Part Name Part # Qty

    2015 ACCESSORY PRODUCTS CATALOG PG 21

    NACD CLUTCH KIT BREAKDOWN410928AM

    REFERENCE# PART # DESCRIPTION79 4-10928 Clutch Pack

    109 2-02986 Clutch Body

    110 2-03565 Facing Plate (1 piece)

    110 2-03563 Facing Plate (3 piece)

    112 2-05504 Pressure Plate

    113 2-05821 Adjusting Ring

    125 2-06566 Release Sleeve

    127 3-33811 Release Bearing

    132 3-09226 Sleeve & Bearing Asy

    146 2-05996 Wear Ring

    935 2-34499 Single Plate Drive Ring

    2-05865 Double Plate Drive Ring

    412-436 Use Clutch Kit 3-32920 or see following pages for clutch kit breakdown

    * 3-32920 Clutch Kit

    CLUTCH MODEL: 11.5 HE (SINGLE PLATE)FRICTION MATERIAL: ORGANICRELEASE BEARING TYPE: BRONZE COLLAR

  • Housing: SAE #3Clutch: 10 HE (Single Plate) Power Take-OffApplication: Side Load or In-Line 436003AM1

    drwng# 436003AM2004

    1 Bell Housing 204245AM 12 Name Plate 233863AM 14 Bolt 206092AM 25 Grease Fitting 260843AM 16 Jam Nut 204751AM 17 Grease Fitting 260843AM 18 Drive Shaft 229243AM 19 Main Bearings 307567AM 2

    10 Bearing Retainer 205710AM 111 Adjusting Lock 205368AM 1

    12 Lock Bolt 203061AM 113 Lock Washer LC100533 114 Cross Shaft 206431AM 115 Woodruff Key 204536AM 217 Yoke Sub Assy 309611AM 120 Shifting Lever 308365AM 1

    Sub Assembly24 Output Key 204475AM 125 Pilot Bearing 100877AM 126 Nut 204715AM 1

    27 Locking Washer 207232AM 128 Clutch Key 204493AM 132 Grease Tube 209570AM 133 Grease Fitting 207954AM 2

    (cross shaft)56 Bearing Spacer 206814AM 1

    (not shown)78 Headless Setscrw 206116AM 1

    (not shown)79 Clutch Assembly 410903AM 1

    (see page 2)

    Ref # Part Name Part # Qty Ref # Part Name Part # Qty Ref # Part Name Part # Qty

    PG 22 HUSKER POWER PRODUCTS

    NACD CLUTCH KIT BREAKDOWN436003AM1

    REFERENCE# PART NUMBER DESCRIPTION1 2-04245 Bell Housing

    5 2-60843 Grease Zerk

    6 2-04751 Jam Nut

    7 2-60843 Grease Zerk

    8 2-29243 Driveshaft

    9 3-07567 Main Bearing (2 required)

    10 2-05710 Bearing Retainer

    11 2-05368 Adjusting Lock

    14 2-06431 Cross Shaft

    15 2-04536 Woodruff Key (2 required)

    17 3-09611 Release Yoke

    18 2-03062 Bolt (2 required)

    20 3-08365 Shifting Lever

    25 5306WS Pilot Bearing (2-07431)

    26 2-04715 Nut

    27 2-07232 Locking Washer

    32 2-09570 Grease Hose

    69 2-60843 Grease Fitting (2 required)

    79 4-10903 Clutch Pack

    HOUSING: SAE #3CLUTCH: 10 HE (SINGLE PLATE)APPLICATION: SIDE LOAD OR IN-LINE

  • Housing: SAE #3Clutch: 10 HE (Single Plate) Power Take-OffApplication: Side Load or In-Line 436003AM1

    drwng# 436003AM2004

    1 Bell Housing 204245AM 12 Name Plate 233863AM 14 Bolt 206092AM 25 Grease Fitting 260843AM 16 Jam Nut 204751AM 17 Grease Fitting 260843AM 18 Drive Shaft 229243AM 19 Main Bearings 307567AM 2

    10 Bearing Retainer 205710AM 111 Adjusting Lock 205368AM 1

    12 Lock Bolt 203061AM 113 Lock Washer LC100533 114 Cross Shaft 206431AM 115 Woodruff Key 204536AM 217 Yoke Sub Assy 309611AM 120 Shifting Lever 308365AM 1

    Sub Assembly24 Output Key 204475AM 125 Pilot Bearing 100877AM 126 Nut 204715AM 1

    27 Locking Washer 207232AM 128 Clutch Key 204493AM 132 Grease Tube 209570AM 133 Grease Fitting 207954AM 2

    (cross shaft)56 Bearing Spacer 206814AM 1

    (not shown)78 Headless Setscrw 206116AM 1

    (not shown)79 Clutch Assembly 410903AM 1

    (see page 2)

    Ref # Part Name Part # Qty Ref # Part Name Part # Qty Ref # Part Name Part # Qty

    2015 ACCESSORY PRODUCTS CATALOG PG 23

    NACD CLUTCH KIT BREAKDOWN410903AM

    CLUTCH MODEL: 10 HE (SINGLE PLATE)FRICTION MATERIAL: ORGANICRELEASE BEARING TYPE: BRONZE COLLAR

    REFERENCE# PART NUMBER DESCRIPTION79 4-10903 Clutch Pack

    109 2-02978 Clutch Body

    110 2-03561 Facing Plate (1 piece)

    110 2-03560 Facing Plate (3 piece)

    112 2-05507 Pressure Plate

    113 2-05821 Adjusting Ring

    125 2-06566 Release Sleeve

    127 3-33811 Release Bearing

    132 3-09226 Sleeve & Bearing Assembly

    136 3-08812 Pressure Plate Assembly

    146 2-05996 Wear Ring

    935 2-05848 Drive Ring

    412-436 Use Clutch Kit 3-32920 or see following pages for clutch kit breakdown

    * 3-32920 Clutch Kit

  • Clutch Model: 10 HE, 11.5 HE & 11.5 HE (DP) Clutch Component Kit332920AM

    drwng# 332920AM2007

    412 Lever Spring 209558AM 1413 Lever 204551AM 3414 Clevis Pin 204801AM 3415 Retaining Ring 205896AM 3417 Lock Bolt LC100523 1418 Lock Washer LC100534 1419 Adjustment Lock 204689AM 1430 Link 204651AM 6431 Clevis Pin 204800AM 3432 Retaining Ring 205897AM 3433 Clevis Pin 204800AM 3434 Retaining Ring 205897AM 3

    436 Sep. Spring (short) 207058AM 3436 Sep. Spring (long) 207060AM 3437 Roll Pin 205040AM 3

    Ref # Part Name Part # Qty Ref # Part Name Part # Qty

    PG 24 HUSKER POWER PRODUCTS

    NACD CLUTCH KIT BREAKDOWN332920AM

    REF # PART NAME PART # QTY 412 Lever Spring 2-09558 1

    413 Lever 2-04551 3

    414 Clevis Pin 2-04801 3

    415 Retaining Ring 2-05896 3

    417 Lock Bolt 2-03122 1

    418 Lock Washer 2-07295 1

    419 Adjustment Lock 2-04689 1

    430 Link 2-04651 6

    431 Clevis Pin 2-04800 3

    432 Retaining Ring 2-05897 3

    433 Clevis Pin 2-04800 3

    434 Retaining Ring 2-05897 3

    436 Sep. Spring (short) 2-07058 3

    436 Sep. Spring (long) 2-07060 3

    437 Roll Pin 2-05040 3

    CLUTCH MODEL: 10 HE, 11.5 HE & 11.5 HE (DP)

  • Clutch Model: 10 HE, 11.5 HE & 11.5 HE (DP) Clutch Component Kit332920AM

    drwng# 332920AM2007

    412 Lever Spring 209558AM 1413 Lever 204551AM 3414 Clevis Pin 204801AM 3415 Retaining Ring 205896AM 3417 Lock Bolt LC100523 1418 Lock Washer LC100534 1419 Adjustment Lock 204689AM 1430 Link 204651AM 6431 Clevis Pin 204800AM 3432 Retaining Ring 205897AM 3433 Clevis Pin 204800AM 3434 Retaining Ring 205897AM 3

    436 Sep. Spring (short) 207058AM 3436 Sep. Spring (long) 207060AM 3437 Roll Pin 205040AM 3

    Ref # Part Name Part # Qty Ref # Part Name Part # Qty

    2015 ACCESSORY PRODUCTS CATALOG PG 25

    DRIVE PLATE, AUXILIARY PULLEY & FLEX PLATES

    PART # DESCRIPTIONDRIVEPLATE

    HP2-40-15 7.5SAE x WL 41

    3020 8SAE x WL 41

    HP2-40-09 10 SAE x WL 41 & 48

    HP2-40-10 11.5 SAE x WL 41 & 48

    HP2-40-49 11.5 SAE X WL 61 & 71

    HP2-40-31 14 SAE X WL 61 & 71

    3090 350-454 Chevy 12 Clutch WL 41 & 48

    PULLEY (AUXILIARY)

    2108 181 Chevy (6.8 Dia.)

    2109 262 & 350 Chevy (Serpentine)(7.0 Dia.)

    2111* 350 Chevy (w/ center ring) (*7.0 Dia 2 B grooves on the inside of pulley)

    2114 454 Chevy (7.0 Dia on Aux.)

    2116 496 Chevy (7.0 Dia. on Aux.)

    2012 300 Ford (6.8 Dia. on Aux.)

    2022 460 Ford (7.0 on Aux.)

    HP2-40-06A 6BB/6BD1/6BG1 Isuzu (7.625 on Aux.)

    HP2-40-52 6SD1 Isuzu (7.4 on Aux.)

    HP2-40-83 4HK1 Isuzu (6.5 on Aux.)

    HP2-40-88 4JJ1 Isuzu w/ keyed crank pulley(7.0 on Aux.)

    HP2-40-88A 4JJ1 Isuzu w/ bolted crank pulley (7.0 on Aux.)

    HP2-40-81 6.8 41 Series; Pulley mounts between companion flange & driveline

    HP2-40-82 6.8 48 Series; Pulley mounts between companion flange & driveline

    (Other pulleys are available for Perkins, John Deere, IH, etc. Please call for pricing.)BOWEX FLEX PLATES & HUBS

    HP2-40-39A SAE 7.5 Fly Wheel Flex 42 Plate

    HP2-40-39B 15 Tooth Spline Hub for Flex 42 Plate

    HP2-40-40 1 Keyed Hub for Flex 42 Plate

    HP2-40-51 7/8 x 13 tooth Hub for Flex 42

    HP2-40-58 7/8 x 1/4 Keyed Hub for Flex 42

    HP2-40-54 SAE 10 Fly Wheel Flex 48 Plate & 13Tooth 7/8 Hub

    HP2-40-55 Bowex Pump Mount SAE #4 2 & 4 Bolt B Plate

    HP2-40-38 Bowex Pump Mount SAE #5 2 & 4 Bolt B

  • PG 26 HUSKER POWER PRODUCTS

    LIMA MAC IRRIGATION GENERATORS480 VOLT, 3 PHASE, 2 BEARING TYPE

    KW PART NUMBER10 HP2-70-02

    12 HP2-70-03

    15 HP2-70-04

    20 HP2-70-06

    25 HP2-70-37

    Generators are FOB Hastings, Nebraska or shipped direct from factory, prepaid with lead time. Other LIMA MAC and Marathon generators are available.

    800.752.0888CALL

    for pricing and availability of items not listed

  • 2015 ACCESSORY PRODUCTS CATALOG PG 27

    ENGINE RADIATORS & COOLING PACKAGES

    APPLICATION PART #4BG1 Crated Radiator 800865-4Z

    4BG1 Radiator Kit w/ Fan HP1-25-30C KIT

    4BG1 Radiator Kit w/o Fan HP1-25-30 KIT

    6BG1 Crated Radiator 800865-6Z

    6BG1 Radiator Kit w/ Fan HP1-25-15C KIT

    6BG1 Radiator Kit w/o Fan HP1-25-15 KIT

    6BD1 Radiator Kit w/ Fan HP1-25-15DC KIT

    181 Crated Radiator 800340-Z

    181 Radiator Kit w/ Fan TPI1809A

    262 Crated Radiator 800341-Z

    262 Radiator Kit w/ Fan TPI1813A

    350 Crated Radiator 800341-Z

    350 Radiator Kit w/ Fan & Serpetine Belts TPI1811A

    350 Radiator Kit w/ Fan & V- Belts TPI1811A OLD

    454 Standard Crated Radiator 800342-Z

    454 Standard Radiator Kit w/ Fan TPI1812A

    454 Heavy Duty Crated Radiator 800343-Z

    454 Heavy Duty Radiator Kit w/ Fan TPI1812E

    496 Crated Radiator 800343-Z

    496 Radiator Kit w/ Fan TPI1814

    460 Ford Crated (while supplies last) 800370B-Z

    Crated Radiators

    include:Core Guard,

    Finger Guard & Shroud

    Diesel Radiator Kits include:

    Crated Radiator, hoses, mounting

    brackets, hardware kits,

    fan & spacers if (stated w/ fan)

    Gas Radiator Kits include:

    Crated Radiator, hoses, mounting

    brackets, hardware kits,

    Fan, fan spacers, belts and

    alternator pulley if required.

    Kits may not fit perfectly due

    to different engine frames

    and set ups

    PART # PRESSURE UP TO

    CONTINUOUS H.P.

    H-424 150 psi 40

    H-430 150 psi 75

    H-440 150 psi 95

    H-448 150 psi 135

    H-460 150 psi 200

    BLU RIVER HEAT EXCHANGERS

    Complete Engine Coolers available. Please call for pricing.

    800.752.0888CA

    LL

    for pricing and ava

    ilability

    of items not listed

  • PG 28 HUSKER POWER PRODUCTS

    INDUSTRIAL GAS ENGINE PLUG WIRES

    PART # APPLICATIONTPI2343 181 (all)

    TPI2322 262 Chevy

    TPI2333 305,350,454Chevy

    TPI2334* 496/8.1L Chevy

    12074074 Chevy Coil Wire

    TPI2324 300 Ford (Std.) w/ coil wire

    TPI2325 300 Ford (HEI) w/ coil wire

    TPI2328 460 (Std.) w/ coil wire

    TPI2329 460(HEI) w/ coil wire

    TPI2340** Suppression Core 350,454 Chevy

    TPI2341** Suppression Core 300 Ford (HEI)

    TPI2342** Suppression Core 460 Ford (HEI)

    * Double Silicone insulated jacket with a spiro bound core

    ** Suppression Core wire sets will cause less interference with electrical equipment. Great for applications with sensitive electronics.

    PART # APPLICATIONTPI2335* 262/4.3L Chevy

    TPI2345* 350/5.7L Chevy

    TPI2337 496/8.1L Chevy

    INDUSTRIAL CERTIFIED GAS ENGINES PLUG WIRES

    All Certified Engine wire sets are Double Silicone insulated jacket with a spiro bound core. *Marked wire sets come with 90deg or 180deg spark plug boot ends as per application and 180deg LT1 coil ends, sets also include coil wires. These wire sets are made for Husker Power Products, Inc. produced certified engines.

    PLEASE NOTEAll wires are double silicone

    insulated jacket with a copper wire core unless noted by an *

  • 2015 ACCESSORY PRODUCTS CATALOG PG 29

    INDUSTRIAL GAS ENGINE EXHAUST MANIFOLDS/HEADERS

    PART # APPLICATION5065 262 Chevy

    5060 350 Chevy

    5010 454 Chevy

    5096 496 Chevy

    900786 300 Ford

    5052 460 Ford

    All Headers are steel construction and come unpainted with ship loose stacks.

    \5060

    350 Chevy

  • PG 30 HUSKER POWER PRODUCTS

    INTAKE & EXHAUST SYSTEM ACCESSORIES

    PART # DESCRIPTIONMUFFLERS

    86177M 2 ID/OD Muffler

    4018STA 2 1/4 Irrigation Muffler

    M065071 2 1/2 Inlet Muffler

    4318STA 3 In / 3 Out Glass Pak

    M080018 3 ID/OD Muffler (fits most Isuzu Industrial Engines)

    HP2-35-67 2 1/8 Exhaust Clamp (plated)

    HPC225 2 1/4 Exhaust Clamp

    HP2-35-34 2 1/2 Exhaust Clamp

    HP2-35-06 3 Exhaust Clamp

    HD400 4 Exhaust Clamp

    (More Exhaust Clamp sizes are available; please call for price and availability)

    EXHAUST PIPES

    HP1-35-13 2 Turn Out (16 tall)

    HP1-35-10 2 1/2 Turn Out (16 tall)

    HP1-35-11 3 Turn Out (16 tall)

    HP2-35-72 2-1/2 Curved Exhaust Pipe (36tall)

    HP2-35-01 3 Curved Exhaust Pipe (36 tall)

    HP2-35-71 4 Curved Exhaust Pipe (36 tall)

    (See Mufflers above for Exhaust Clamps)

    EXHAUST RAIN CAPS

    35225 1 1/2 Rain Cap

    HP2-35-53 2 Cushion Type Rain Cap

    P270533 2 1/4 Rain Cap

    FB0017 2 3/8 Rain Cap

    HP2-35-40 2 1/2 Rubber Cushion Rain Cap

    HP2-35-28 3 Rubber Cushion Rain Cap

    FB0023 3 Rain Cap

    HP2-35-24 4 Rain Cap

    HP2-35-66 5 Rain Cap

    HP2-30-127 6 Rain Cap

    AIR INTAKE BONNET

    HP2-30-146 Gas Air Cleaner Bonnet (PLASTIC ONLY)

    101 Rod and Nut assembly for above Bonnet

  • 2015 ACCESSORY PRODUCTS CATALOG PG 31

    EXHAUST PRIMERS

    PART NUMBER DESCRIPTION

    PROTEK EXHAUST PRIMERS

    EP150/225-3 1/2 Exhaust Primer for 3 1/2 Exhaust

    EP150/225-3NPT Exhaust Primer for 3 NPT Exhaust

    EP250/300-3NPT Exhaust Primer for 3 NPT Exhaust

    EP60/90 Exhaust Primer

    EP60/90-1 1/4 Exhaust Primer for 1 1/4 Exhaust

    EP60/90-1-1/2 Exhaust Primer for 1 1/2 Exhaust

    EP60/90-2 1/2 Exhaust Primer for 2 1/2 Exhaust

    EP60/90-2 NPT Exhaust Primer for 2 NPT Exhaust

    PROTEK POWER PRIMERS

    PP35AC Power Primer

    \EP 60/90

    Exhaust Primer

  • PG 32 HUSKER POWER PRODUCTS

    MANIFOLD PRIMER

    PART # DESCRIPTION1000 Vacuum Primer Assembly

    1001A Top Cover Assembly

    1002A Lower Cover Assembly

    1003 Lower Housing

    1004 Upper Housing

    1005 Bracket (2 required)

    1008A Float Assembly

    1010A Tie Bolt w/ nuts (3 required)

    1011 Upper Cork Gasket

    1012 Cork Gaskets (3 required)

    1014 Brass Steel Angle Valve

    / 1001A

    / 1003

    / 1005

    / 1010A

    / 1011

    / 1012

    \ 1002A

    \ 1004

    \ 1008A

    \ 1014

  • 2015 ACCESSORY PRODUCTS CATALOG PG 33

    110V ENGINE HEATERS

    PART # TYPE APPLICATION3308001 Tank 750W Tank Type Heater

    3308002 Tank 1000W Tank Type Heater

    3308003 Tank 1500W Tank Type Heater

    3400017 Magnetic 200W Magnetic Heater

    3100098 Frost plug 3CB1 Isuzu

    HP2-05-36 Frost plug 3CD1 Isuzu

    3100067 Frost plug 3KC1, 3KR1 Isuzu

    3100098 Frost plug 3LB1 Isuzu

    3100094 Frost plug 3LD1, 3LD2 Isuzu

    310-0065 Frost plug 4BB1, 4BD1, 4BG1 Isuzu

    3100069 Frost plug 4JB1, 4JG1 Isuzu

    3100094 Frost plug 4LC, 4LE1, 4LE2 Isuzu

    310-0065 Frost plug 6BB1, 6BD1, 6BG1 Isuzu

    3100068 Frost plug C240 Isuzu

    8602220 Frost plug E120, 6RB1 Isuzu

    3308003 Tank 6SA1 Isuzu

    3308003 Tank 6HK1 Isuzu

    3500151 Frost Plug 4HK1

    The above list of engine heaters is now in stock. Many other heaters are available on a special order basis.

    \HP2-05-36

    3CD1 Isuzu

    \3308003

    1500W tank type heater

    800.752.0888CALL

    for pricing and availability of items not listed

  • PG 34 HUSKER POWER PRODUCTS

    THROTTLE CABLES & PARTS

    PART # DESCRIPTION

    CABLES

    HP2-15-01 60 Throttle Cable w/ Vernier Control Head (threaded end)

    HP2-15-02 48 Throttle Cable w/ Vernier Control Head (threaded end) (4BD, 4BG, 6BD, 6BG)

    HP2-15-05 Throttle Cable (CAT) (threaded end)

    HP2-15-06 Throttle Cable (CASE) (wire end)

    HP2-10-07 84 Kill Cable (wire end)

    R09D3.5X06 6ft Throttle Cable w/ T handle (wire end)

    VCGTX06 * 6ft Throttle Cable w/ Vernier Control Head (wire end)

    VCGTX10 * 10ft Throttle Cable w/ Vernier Control Head (wire end)

    VCGTX15 * 15ft Throttle Cable w/ Vernier Control Head (wire end)

    *Longer Lengths are available.

    CABLE PARTS

    HP2-15-11A Vernier Control Head

    HP2-15-11B Rubber Boot (red) for HP-15-11A

    vcgtho Vernier Control Head for VCG Cables

    HP2-00-125 Wire Stop Kit

    HP2-15-03 Clevis 1/4 Throttle CTR

    HP2-15-07 Swivel Cable Stop (used on HP2-10-07)

    HP2-15-08 Cable Clip (used on HP2-10-07)

    1548 Throttle Stop Bullet

    \R09D3.5X06

    6ft Throttle Cable w/ T handle (wire end)

    \VCGTX06

    6ft Throttle Cable w/ Vernier Control Head (wire end)

  • 2015 ACCESSORY PRODUCTS CATALOG PG 35

    ENGINE OIL DRAIN VALVES

    PART # SIZE DESCRIPTION

    OIL DRAIN VALVES

    FG7BN M22-15 3CD1

    F101N 1/2 UNF

    F103N 12mm-1.25

    F104N 18mm-1.5 Fits Most B-Series Cummins

    F105N 20mm-1.5 Fits Most Isuzu

    F106N 14mm -1.5 460 Ford

    F107N 12mm-1.75 95 & up 454

    F108N M16-1.5 3CA/3CB

    F109N 12mm-1.5

    F110N 3/8 Pipe

    T200N NPT 1-12

    T201N NPT 3/4 -1/4

    T202N NPT 1/2 454 Power Max

    T203N 1-18 UNF

    T204N 3/4-16 UNF Caterpillar, Ford Diesel, most Perkins

    T205N 1 1/8-12mm UNF

    T206N 7/8-14 UNF

    T207N 26mm-15

    T208N 7/8-18 UNF

    OIL PAN ADAPTERS

    HP2-00-175 12mm-1.5 x 1/2 NPT Most Chevy Engines

    HP2-00-176 Gasket Gasket for HP2-00-175

    HP2-00-152 22mm-1.5 x 1/2 NPT

    HP2-00-153 Gasket Gasket for HP2-00-152

    HP2-00-154 16mm-1.5 x 1/2 NPT

    HP2-00-155 Gasket Gasket for HP2-00-154

    HP2-00-172 14MM-1.5 x 1/2 NPT

    HP2-00-173 Gasket Gasket for HP2-00-173

    HP2-00-47 20mm-1.5 x 1/2 npt

    HP2-00-50 Gasket Gasket for HP2-00-47

    HP2-00-47A 24mm-1.5 x 1/2 npt

    HP2-00-50A Gasket Gasket for HP2-00-47A

    HP2-00-01 1/2 NPT x 30 Drain hose (1/2 male NPT on both ends)

    N-SERIES valve (as pictured above) is equipped with a nipple to enable the operator to attach a hose.

    800.752.0888

    CALL

    for more sizes,

    pricing and availab

    ility.

  • PG 36 HUSKER POWER PRODUCTS

    DRIPPER REGULATORS & OIL ACCESSORIES

    PART NUMBER DESCRIPTION

    DRIPPER AND TANK COMPONENTS

    82124033 Dripper Regulator

    81963365 Dripper Tank

    82124025 Shut Off Valve

    PT24044 1/4 Dripper Hose

    68X4 Compression Fitting 1/4 Tube OD X 1/8 NPT

    60X4 Compression Sleeve 1/4

    82124058 Dripper Lower Gasket

    82124066 Dripper Top Gasket

    82124041 Regulator Glass

    SIGHT GAUGES

    B1144-14 Sight Gauge, 4 (vented as shown above)

    B1144-14S Sight Gauge, 4 (open top for 1/4 NPT Nipple)

    B-1144-23 Sight Gauge, 5

    B-1150-5 Sight Gauge, 6 with 90 long elbow

    B2577-11 Sight Gauge, 3 1/2 with 90 inlet

    Replacement gaskets also available

    \VENTED SIGHT GAUGE

    \ 81963365

    Dripper Tank

    \82124033

    Dripper Regulator

  • 2015 ACCESSORY PRODUCTS CATALOG PG 37

    ENGINE TRAILERS

    PART # DESCRIPTIONTPI2040 6 Engine Trailer with 2 Mounting Rails

    TPI2041 7 Engine Trailer with 2 Mounting Rails

    TPI2042 8 Engine Trailer with 2 Mounting Rails

    TPI2045 10 Engine Trailer with 2 Mounting Rails

    HP1-20-27 Generator Bracket Diesel Standard

    TPI2037A Generator Bracket - Trailer Side Mount

    TPI2038 Generator Bracket T-L

    TPI2039 Generator Bracket - Rear Mount

    TPI2036 Generator Bracket - Belly Mount

    TPI2035 Trailer Leg (less bracket)

    TPI2034 Trailer leg Bracket

    TPI2033 Extra Mount Rail

    TPI2030 Axle Less Wheels & Tires

    TPI2030A Axle with Wheels & Tires

    91260 Trailer Jack w/ Foot Front Mount

    91215 Trailer Jack Swivel w/ Foot

    TPI 550 Telescoping Engine Stands

    Trailers are priced unassemblied, FOB Hastings, NE.

    PLEASE NOTEThese trailers are for off-highway use only.

  • PG 38 HUSKER POWER PRODUCTS

    ENGINE SHELTERS

    PART # DESCRIPTIONEngine Shelter (unassembled)

    Includes 2 Bows, 4 sheets, 26GA sheet metal & 1 Bolt Package

    Bows Extra Bow

    Extra Sheet Sheet of 26GA Sheet Metal

    Bolt Package Hardware for 1 Engine Shelter

    HP2-10-01 Bolt Down Base

    HP2-10-01A Cast In Place Base

    P8101-723 Wedge Anchor Bolt (not included in bolt package)

    PLEASE NOTEHusker Power Products recommends

    all electronic controlled engines have a shelter over it.

    \144 D

    \93 H

    \96 W

    \67 H

  • 2015 ACCESSORY PRODUCTS CATALOG PG 39

    Important Notice Regarding Product Repairs and Warranty Claims

    In order to provide you with the best service possible and to expedite all product repairs and warranty claims, we are changing the processes required to complete the repair or warranty claim. This will require certain actions and information on your part. Partial details follow. For complete details please contact your Murphy Inside Sales Representative.

    WR Number: A Warranty/Repair Return Authorization Number (WR#) will be required prior to all product returns. This number will allow both of us to track the product and to expedite processing of your request. Simply contact our Inside Sales to request this number. They will ask certain questions that will identify your exact request so that we can fully comply. They will also advise you of certain procedural changes or conditions that may apply to your request, as outlined below.

    Complaint/Request Details: Effective January 1, 2005, Warranty claims will require a detailed explanation of the problem or complaint so that we can directly address your concerns. A large percentage of times we are unable to find a problem with the product because we dont know the details of your complaint, and we thus dont know what to look for. We evaluate the product against our specifications, but that may not address your complaint. This explanation will be required for Warranty requests in order to receive the return authorization (WR#). This explanation is also recommended for Repairs but is not required. See below for Repairs.

    Evaluation Fee: Effective January 1, 2005 we will initiate an Evaluation Fee to cover certain costs associated with diagnosing problems, or suspected problems, with certain products. Your Murphy Sales Rep will advise you of this charge, and when it applies, when you request the WR#. For example, if our evaluation does not support a Warranty Claim, the customer will be asked to pay the fee. However, the fee can be applied to the cost of repair or against the purchase of a new unit. Likewise the fee can be applied to the cost associated with a non-warranty repair. If our evaluation supports the Warranty Claim, the fee will be waived. Also see Repairs below.

    Warranty Claim: Provide detailed explanation of the problem and why Warranty is claimed. Immediate replacement prior to our evaluation will

    require that the customer purchase a new unit. If the warranty claim is validated, a credit will be issued against the new unit purchased. A customer purchase order is required prior to replacement.

    Evaluation fee may apply. If applicable, the fee may be applied to repairing the unit or to the purchase of a new unit.

    Repairs (Non-Warranty): Contact Murphy to receive WR#

    Some products may no longer be accepted for repair. Some, because of their design cannot be repaired, others are uneconomical to repair. In many cases repair parts are/will be available for the customer to make the repair. Your Murphy Sales rep will advise details when the WR# is requested.

    (Preferred but not required) Provide detailed explanation of the problem.

    An estimated repair charge will be available later in 2004 for those products that can be repaired. When an exact cost is required prior to the actual repair, an Evaluation Fee will apply. The fee may be applied toward the final repair cost. A purchase order is required for either the estimated repair charge or the evaluation fee. (Effective date for the Evaluation Fee is January 1, 2005).

    If the actual cost to repair is greater than 65% of the customers cost to purchase a new product, we will advise. The customer may then proceed with the repair, purchase a new product, scrap the unit or have it returned as is (at customers expense). If the unit is scrapped or returned, an evaluation fee will apply (effective January 1, 2005).

    NOTE: The evaluation fee for 2015 is $45 Net (no discount)

    Prices are subject to change without notice

    MURPHY WARRANTY

  • 2955 West Highway 6 | Hastings, NE 68901

    800.752.0888 | 402.463.1531 | 402.463.1313 FAX