2015 02 02 katalog web verzija
-
Upload
petra-mikac -
Category
Documents
-
view
232 -
download
0
description
Transcript of 2015 02 02 katalog web verzija
-
Zrinski AG d.o.o.
Gospodarska ulica 6
42202 Trnovec Bartoloveki
Croatia
www.zrinskiag.hr
Tel: 00385 42 68 44 60
1st registered manufacturer of implants
in veterinary medicine in Croatia
Reg.:UP/I-322-005/12-01/740
VETERINARY PRODUCT CATALOGUE
The Specialist for Medical
and Industrial production
-
2 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
-
3 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
TABLE OF CONTENTS
PRODUCT CATALOGUE
Zrinski plates and screws system 4
Zrinski system features / advantages and benefits 5
Screws 7
Reconstruction Plates 11
Reconstruction Plates Non-Locking System 14
Limited Contact Plates 17
DPO / TPO Plates 20
TPLO Plates 22
H-Locking Plates 25
Instruments 26
Accessories 28
OPERATION TECHNIQUE
Operation technique 33
-
4 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
ZRINSKI PLATES AND SCREWS System
Zrinski plates and screws system is simple system that combines both the
advantages of conventional plating systems with locking systems offering the
surgeon best of both worlds. System is designed for operative treatment of
fractures, anatomical reconstruction and re-establishment of lost functionality.
Modern geometry plates offer surgeon a wide range of application, from
extremities to spine.
Zrinski plates and screw system was designed after size of the locking hole and
based on screw diameter that fits the locking hole was defined as Small and
Medium with S and M as identifiers for certain category.
Small Medium
Diameters Diameters
2.0/2.4mm 2.7/3.5mm
The angle stable screw-plate locking system offers a polyaxial insertion of screws
into the plate at an angle of +/- 15 regarding to locking holes central axis. The
stability of the fracture treatment is the result of the high construct stiffness and
is almost independent of the bone quality, contact pressure and whether the
plate is precisely formed after the bone or not. The loading is transfered directly
from the screw to the plate.
The locking system is based on plastic deformation between locking screws head
thread and the plates locking hole flute lips. The locking system is reliable for
repeated insertion of the screw, for example when correcting the screw angle or
position.
System profile
Simple, variable and intuitive
Biocompatibile
Indications from diaphyseal to
articular fractures and arthrodesis
Company profile
Fast customer support
Knowledge gained in human
medicine applied to veterinary
program
Possibility to implement new
solutions and ideas
-
5 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
ZRINSKI System FEATURES / ADVANTAGES and BENEFITS
Feature / Advantage Benefit
Implants made out of titanium and
titanium alloy
Highest biocompatibility
Modulus of elasticity more similar to bone High specific strength
Non-magnetic properties
Unique locking system Patented locking technology Only two components in interaction (plate
and screw)
Simple and easy unlocking of screws (no cold welding)
Repeated locking in the same hole is allowed if realignment of the screw is necessary
Locking function from 0.8mm plate
thickness onwards
Internal fixator principle Reduced pressure on periosteum Disruption of blood supply minimized
Positive effects on the healing process
K-wire holes for K-wire insertion K-wires insertion Catching individual fragments with
multifractures
Security with possible rotation due to screw insertion and locking into the plate
Primary fixation to the bone
Angle stable locking Screw locking at any desired angel in +/- 15 range
No risk of primary and secondary loss of reduction
No need for additional aiming instruments Favors the capture of individual fragments
Poliaxial cortical screws insertion Cortical screw insertion at +/- 15 in all directions for S
Cortical screw insertion at +/- 20 in all directions for M
Note: all Zrinski features (with exception to locking system on non-locking reconstruction plates) are incorporated in all implants
throughout the system and therefore wont be repeatable with individual implant description
-
6 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
Feature / Advantage Benefit
Different screw diameters - same
locking hole
S locking hole - screw diameters till 2.4mm
M locking hole - screw diameters till 4.1mm
Different screw diameters on same
anatomical location possible
Different screw types - same locking
hole
Possibility of free choice between locking or non-locking screws for each hole
High adaptation ability for individual cases
Dynamic compression between two
bone fragments
If necessary some amount of compression between two bone fragments can be achieved
No need for additional instrumentation
Type III anodization (coloring) Easy identification during surgical procedure (color coding)
Reduction of aluminium and vanadium ions release from titanium alloy (screws)
Simple, intuitive instrumentation, low
number of required instruments
Reduction of surgery time
Risk of implantation errors reduced to minimum
Very short usage learning curve
ZRINSKI System FEATURES / ADVANTAGES and BENEFITS
-
7 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
ZRINSKI SCREWS
Small Medium
Diameters Diameters
2.0/2.4mm 2.7/3.5mm
Zrinski screws are available both as locking and conventional cortical screws.
Based on screw diameter they are grouped into Small and Medium
categories. S & M are used as the identified through the complete system.
Locking and cortical screws are available in various diameters and lengths and
can lock into plate under multiple angles in all directions, while cortical screws
dont lock but offer additional fixation if necessary.
Locking screws Cortical screws
Screw
diameters Screw lenghts Locking angle
Screw
diameters Screw lenghts Locking angle
2.0mm 6 20mm +/- 15
2.0mm 6 20mm +/- 15
2.4mm 6 24mm +/- 15 2.4mm 6 24mm +/- 15
2.7mm 8 50mm +/- 15 2.7mm 8 50mm +/- 20
3.5mm 8 56mm +/- 15 3.5mm 8 56mm +/- 20
Advantage Benefit
Self tappping
Atraumatic tip
Minimal risk of soft tissue irritation at bicortical implanting
No need for bone tapping prior to screw insertion
Reduction of instrumentation and surgery time
Self retaining torx screw/bit interface
in screw head
Easy screw pickup and removing from sterilization tray
High torque transmission with reduced risk of screw stripping
-
8 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
Product No. Diameter (mm)
Length (mm)
ZVS 206 2.0 6
ZVS 208 2.0 8
ZVS 210 2.0 10
ZVS 212 2.0 12
ZVS 214 2.0 14
ZVS 216 2.0 16
ZVS 218 2.0 18
ZVS 220 2.0 20
2.0mm Locking Screws
LOCKING SCREWS 2.0/2.4mm System
2.4mm Locking Screws
Product No. Width (mm)
Length (mm)
ZVS 306 2.4 6
ZVS 308 2.4 8
ZVS 310 2.4 10
ZVS 312 2.4 12
ZVS 314 2.4 14
ZVS 316 2.4 16
ZVS 318 2.4 18
ZVS 320 2.4 20
ZVS 322 2.4 22
ZVS 324 2.4 24
Product No. Diameter (mm)
Length (mm)
ZVS 408 2.7 8
ZVS 410 2.7 10
ZVS 412 2.7 12
ZVS 414 2.7 14
ZVS 416 2.7 16
ZVS 418 2.7 18
ZVS 420 2.7 20
ZVS 422 2.7 22
ZVS 424 2.7 24
ZVS 426 2.7 26
ZVS 428 2.7 28
ZVS 430 2.7 30
ZVS 432 2.7 32
ZVS 434 2.7 34
ZVS 436 2.7 36
ZVS 438 2.7 38
ZVS 440 2.7 40
ZVS 445 2.7 45
ZVS 450 2.7 50
2.7mm Locking Screws 3.5mm Locking Screws
Product No. Diameter (mm)
Length (mm)
ZVS 508 3.5 8
ZVS 510 3.5 10
ZVS 512 3.5 12
ZVS 514 3.5 14
ZVS 516 3.5 16
ZVS 518 3.5 18
ZVS 520 3.5 20
ZVS 522 3.5 22
ZVS 524 3.5 24
ZVS 526 3.5 26
ZVS 528 3.5 28
ZVS 530 3.5 30
ZVS 532 3.5 32
ZVS 534 3.5 34
ZVS 536 3.5 36
ZVS 538 3.5 38
ZVS 540 3.5 40
ZVS 542 3.5 42
ZVS 544 3.5 44
ZVS 546 3.5 46
ZVS 548 3.5 48
ZVS 550 3.5 50
ZVS 552 3.5 52
ZVS 554 3.5 54
ZVS 556 3.5 56
LOCKING SCREWS 2.7/3.5mm System
-
9 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
Product No. Diameter
(mm)
Length
(mm)
ZVS 606 2.0 6
ZVS 608 2.0 8
ZVS 610 2.0 10
ZVS 612 2.0 12
ZVS 614 2.0 14
ZVS 616 2.0 16
ZVS 618 2.0 18
ZVS 620 2.0 20
2.0mm Cortical Screws
CORTICAL SCREWS 2.0/2.4mm System
2.4mm Cortical Screws
Product No. Width
(mm)
Length
(mm)
ZVS 706 2.4 6
ZVS 708 2.4 8
ZVS 710 2.4 10
ZVS 712 2.4 12
ZVS 714 2.4 14
ZVS 716 2.4 16
ZVS 718 2.4 18
ZVS 720 2.4 20
ZVS 722 2.4 22
ZVS 724 2.4 24
Product No. Diameter
(mm)
Length
(mm)
ZVS 808 2.7 8
ZVS 810 2.7 10
ZVS 812 2.7 12
ZVS 814 2.7 14
ZVS 816 2.7 16
ZVS 818 2.7 18
ZVS 820 2.7 20
ZVS 822 2.7 22
ZVS 824 2.7 24
ZVS 826 2.7 26
ZVS 828 2.7 28
ZVS 830 2.7 30
ZVS 832 2.7 32
ZVS 834 2.7 34
ZVS 836 2.7 36
ZVS 838 2.7 38
ZVS 840 2.7 40
ZVS 845 2.7 45
ZVS 850 2.7 50
2.7mm Cortical Screws 3.5mm Cortical Screws
Product No. Diameter
(mm)
Length
(mm)
ZVS 908 3.5 8
ZVS 910 3.5 10
ZVS 912 3.5 12
ZVS 914 3.5 14
ZVS 916 3.5 16
ZVS 918 3.5 18
ZVS 920 3.5 20
ZVS 922 3.5 22
ZVS 924 3.5 24
ZVS 926 3.5 26
ZVS 928 3.5 28
ZVS 930 3.5 30
ZVS 932 3.5 32
ZVS 934 3.5 34
ZVS 936 3.5 36
ZVS 938 3.5 38
ZVS 940 3.5 40
ZVS 945 3.5 45
ZVS 950 3.5 50
ZVS 955 3.5 55
CORTICAL SCREWS 2.7/3.5mm System
-
10 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
-
11 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
RECONSTRUCTION PLATES
Indications:
Reconstruction of all bone types
Fracture osteosynthesis and distal parts
of extremities arthrodesis
Diaphyseal, metaphyseal and epiphyseal
fractures of long bones
Flat bones fractures (eg. pelvis)
Irregular bones fractures (eg. mandible)
Advantage Benefit
Bending zones Two plane plate bending Plate twisting Adjustment to certain case
Round plate profile with chamfered
plate contour
Less soft tissue irritation
Better adjustment to bone
Superior mechanical properties compared to flat plates
K-wire holes for K-wire insertion K-wires insertion
Catching individial fragments at
multifractures
Securitiy with possible rotation due to
screw insertion into the plate
Primary fixation to the bone
Limited contact Minimal contact with bone periosteum
Bone periosteum blood flow
preservation
-
12 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
Product No. Width (mm)
Length (mm)
Holes
ZVP 103 6.2 18 3
ZVP 104 6.2 24 4
ZVP 105 6.2 30 5
ZVP 106 6.2 36 6
ZVP 107 6.2 42 7
ZVP 108 6.2 48 8
ZVP 109 6.2 54 9
ZVP 110 6.2 60 10
1.5mm Reconstruction Plates
RECONSTRUCTION PLATES 2.0/2.4mm Locking System
1.5mm Reconstruction T-Plates
Product No. Width (mm)
Length (mm)
Holes
ZVP 124 6.2 18 4
ZVP 125 6.2 24 5
ZVP 126 6.2 30 6
ZVP 127 6.2 36 7
ZVP 128 6.2 42 8
ZVP 129 6.2 48 9
Product No. Width (mm)
Length (mm)
Holes
ZVP 204 7.8 30 4
ZVP 205 7.8 37.5 5
ZVP 206 7.8 45 6
ZVP 207 7.8 52.5 7
ZVP 208 7.8 60 8
ZVP 209 7.8 67.5 9
ZVP 210 7.8 75 10
ZVP 212 7.8 90 12
ZVP 214 7.8 105 14
2.0mm Reconstruction Plates
2.0mm Reconstruction T-Plates
Product No. Width (mm)
Length (mm)
Holes
ZVP 224 7.8 22.5 4
ZVP 225 7.8 30 5
ZVP 226 7.8 37.5 6
ZVP 227 7.8 45 7
ZVP 228 7.8 52.5 8
ZVP 229 7.8 60 9
-
13 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
2.5mm Reconstruction Plates
RECONSTRUCTION PLATES 2.7/3.5mm Locking System
Product No. Width (mm)
Length (mm)
Holes
ZVP 304 9.5 36 4
ZVP 305 9.5 45 5
ZVP 306 9.5 54 6
ZVP 307 9.5 63 7
ZVP 308 9.5 72 8
ZVP 309 9.5 81 9
ZVP 310 9.5 90 10
ZVP 312 9.5 108 12
ZVP 314 9.5 126 14
ZVP 316 9.5 144 16
3.2mm Reconstruction Plates
Product No. Width (mm)
Length (mm)
Holes
ZVP 404 11.7 44 4
ZVP 405 11.7 55 5
ZVP 406 11.7 66 6
ZVP 407 11.7 77 7
ZVP 408 11.7 88 8
ZVP 409 11.7 99 9
ZVP 410 11.7 110 10
ZVP 411 11.7 121 11
ZVP 412 11.7 132 12
ZVP 414 11.7 154 14
ZVP 415 11.7 165 15
ZVP 416 11.7 176 16
ZVP 418 11.7 198 18
ZVP 420 11.7 220 20
-
14 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
Product No. Width (mm)
Length (mm)
Holes
ZNP 103 6.2 18 3
ZNP 104 6.2 24 4
ZNP 105 6.2 30 5
ZNP 106 6.2 36 6
ZNP 107 6.2 42 7
ZNP 108 6.2 48 8
ZNP 109 6.2 54 9
ZNP 110 6.2 60 10
1.5mm Reconstruction Plates
RECONSTRUCTION PLATES 2.0/2.4mm Non-Locking System
1.5mm Reconstruction T-Plates
Product No. Width (mm)
Length (mm)
Holes
ZNP 124 12.1 18 4
ZNP 125 12.1 24 5
ZNP 126 12.1 30 6
ZNP 127 12.1 36 7
ZNP 128 12.1 42 8
ZNP 129 12.1 48 9
Product No. Width (mm)
Length (mm)
Holes
ZNP 204 7.8 30 4
ZNP 205 7.8 37.5 5
ZNP 206 7.8 45 6
ZNP 207 7.8 52.5 7
ZNP 208 7.8 60 8
ZNP 209 7.8 67.5 9
ZNP 210 7.8 75 10
ZNP 212 7.8 90 12
ZNP 214 7.8 105 14
2.0mm Reconstruction Plates
2.0mm Reconstruction T-Plates
Product No. Width (mm)
Length (mm)
Holes
ZNP 224 15.2 22.5 4
ZNP 225 15.2 30 5
ZNP 226 15.2 37.5 6
ZNP 227 15.2 45 7
ZNP 228 15.2 52.5 8
ZNP 229 15.2 60 9
-
15 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
2.5mm Reconstruction Plates
RECONSTRUCTION PLATES 2.7/3.5mm Non-Locking System
Product No. Width (mm)
Length (mm)
Holes
ZNP 304 9.4 36 4
ZNP 305 9.4 45 5
ZNP 306 9.4 54 6
ZNP 307 9.4 63 7
ZNP 308 9.4 72 8
ZNP 309 9.4 81 9
ZNP 310 9.4 90 10
ZNP 312 9.4 108 12
ZNP 314 9.4 126 14
ZNP 316 9.4 144 16
3.2mm Reconstruction Plates
Product No. Width (mm)
Length (mm)
Holes
ZNP 404 11.7 44 4
ZNP 405 11.7 55 5
ZNP 406 11.7 66 6
ZNP 407 11.7 77 7
ZNP 408 11.7 88 8
ZNP 409 11.7 99 9
ZNP 410 11.7 110 10
ZNP 411 11.7 121 11
ZNP 412 11.7 132 12
ZNP 414 11.7 154 14
ZNP 415 11.7 165 15
ZNP 416 11.7 176 16
ZNP 418 11.7 198 18
ZNP 420 11.7 220 20
-
16 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
-
17 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
LIMITED CONTACT PLATES
Indications:
Fracture osteosynthesis and distal parts
of extremities arthrodesis
Diaphyseal fractures and long bones
proximal and distal metaphysis
fractures
Advantage Benefit
Limited contact bottom surface Less contact with bone periosteum Periosteal blood flow preservation More uniform plate bending
Strong plate profile (compared to
reconstruction plates)
More demanding usage with high mechanical load cases
Suitable for distal part of limb arthrodesis
Tapered and beveled plate tip with
rounded upper surface edge
Subcutaneous insertion
Less soft tissue irritation
K-wire holes for K-wire insertion K-wires insertion
Catching individual fragments at
multifractures
Security with possible rotation due to
screw insertion and locking into the
plate
-
18 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
1.5mm LC Straight Plates
LIMITED CONTACT PLATES 2.0/2.4mm Locking System
Product No. Width (mm)
Length (mm)
Holes
ZVP 430 6.18 22 3
ZVP 431 6.18 28 4
ZVP 432 6.18 34 5
ZVP 433 6.18 40 6
ZVP 434 6.18 46 7
ZVP 435 6.18 52 8
ZVP 436 6.18 58 9
ZVP 437 6.18 64 10
ZVP 438 6.18 124 20
2.0mm LC Straight Plates
Product No. Width (mm)
Length (mm)
Holes
ZVP 440 7.8 34 4
ZVP 441 7.8 41,5 5
ZVP 442 7.8 49 6
ZVP 443 7.8 56.5 7
ZVP 444 7.8 64 8
ZVP 445 7.8 71,5 9
ZVP 446 7.8 79 10
ZVP 447 7.8 94 12
ZVP 448 7.8 109 14
ZVP 449 7.8 154 20
-
19 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
2.6mm LC Straight Plates
LIMITED CONTACT PLATES 2.7/3.5mm Locking System
Product No. Width (mm)
Length (mm)
Holes
ZVP 504 8.5 39 4
ZVP 505 8.5 48 5
ZVP 506 8.5 57 6
ZVP 507 8.5 69 7
ZVP 508 8.5 75 8
ZVP 509 8.5 84 9
ZVP 510 8.5 93 10
ZVP 512 8.5 111 12
ZVP 514 8.5 129 14
ZVP 516 8.5 147 16
3.3mm LC Straight Plates
Product No. Width (mm)
Length (mm)
Holes
ZVP 604 11 50 4
ZVP 605 11 62 5
ZVP 606 11 74 6
ZVP 607 11 86 7
ZVP 608 11 98 8
ZVP 609 11 110 9
ZVP 610 11 122 10
ZVP 611 11 134 11
ZVP 612 11 146 12
ZVP 613 11 158 13
ZVP 614 11 170 14
ZVP 615 11 182 15
ZVP 616 11 194 16
ZVP 618 11 218 18
ZVP 620 11 242 20
-
20 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
DPO/TPO PLATES
Indications:
Double pelvic osteotomy
Triple pelvic osteotomy
Note: available only in M size
Advantage Benefit
Anatomically predefined plate shape Plate designed to suit canine pelvis without need for modifying
Different plate angulations Adjustable to individual cases
Better final osteotomy results
-
21 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
DPO Locking Plates, Left
DPO/TPO PLATES 2.7/3.5mm Locking System
Product No. Angulation () Holes
ZVP 753 25 8
ZVP 754 30 8
ZVP 756 35 8
TPO Locking Plates, Left
Product No. Angulation () Holes
ZVP 701 15 6
ZVP 702 20 6
ZVP 703 25 6
ZVP 704 30 6
ZVP 705 40 6
DPO Locking Plates, Right
Product No. Angulation () Holes
ZVP 743 25 8
ZVP 744 30 8
ZVP 746 35 8
TPO Locking Plates, Right
Product No. Angulation () Holes
ZVP 711 15 6
ZVP 712 20 6
ZVP 713 25 6
ZVP 714 30 6
ZVP 715 40 6
-
22 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
TPLO PLATES
Indications:
Tibial plateau leveling osteotomy
Advantage Benefit
Anatomically precontoured plate
design
Plate is anatomically designed to suit proximal medial part of canine tibia
It enables regular re-aligment and optimal function of repaired knee
Optimal placement of locking holes
in plate head
Achieving good stability after the corrective procedure
-
23 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
TPLO Locking Plates S 2.7mm
TPLO PLATES 2.7mm Locking System
Product No. Type
ZVP 723 Left
ZVP 722 Right
TPLO Locking Plates S 3.5mm
Product No. Type
ZVP 730 Left
ZVP 731 Right
TPLO Locking Plates M 2.7mm
Product No. Type
ZVP 720 Left
ZVP 721 Right
TPLO Locking Plates M 3.5mm
Product No. Type
ZVP 732 Left
ZVP 733 Right
TPLO PLATES 3.5mm Locking System
-
24 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
-
25 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
H-LOCKING PLATES
Indications:
Spinal application
Atlanto-axial luxation reduction and
stabilization
Advantage Benefit
Anatomically precontoured plate
design
Plate designed for application on canine spine without need for additional modifying
Different plate sizes Adjustable to individual cases
Better final results
H-Locking Plates 2.0/2.4mm Locking System
H-Locking Plates 2.0mm
Product No. Length (mm)
Holes
ZVP 761 12 4
ZVP 762 14 4
ZVP 763 16 4
-
26 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
AO Handle
INSTRUMENTS
Product No. Length (mm)
ZVI 100 small
ZVI 103 large
Screwdriver Bit T6
Screwdriver Bit T15
Product No.
ZVI 101
Product No.
ZVI 102
Drill Guide 2.0/2.5mm
Product No.
ZVI 110
Drill Guide 1.3/1.7mm
Product No.
ZVI 111
Drill Bit 1.3mm
Product No.
ZVI 122
Drill Bit 1.7mm
Product No.
ZVI 123
Drill Bit 2.0mm
Product No.
ZVI 120
Drill Bit 2.5mm
Product No.
ZVI 121
-
27 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
Depth Gauge 2.7/3.5
INSTRUMENTS
Product No.
ZVI 126
Plate Holding Forceps
Depth Gauge 2.0/2.4
Product No.
ZVI 127
Product No.
ZVI 108
Drill Guide 1.7mm/Compression
Product No.
ZVI 113
Drill Guide 1.3mm/Compression
Product No.
ZVI 112
Drill Guide 2.5mm/Compression
Product No.
ZVI 115
Drill Guide 2.0mm/Compression
Product No.
ZVI 114
Plate Bender S
Product No.
ZVI 124
Plate Bender M
Product No.
ZVI 125
-
28 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
Tray 2.0/2.4 Locking System
ACCESSORIES
Product No. Description
ZVT 830 Tray 2.0/2.4
Tray 2.7 Locking System
Product No. Description
ZVT 810 Tray 2.7
ZVT 811 Tray 2.7 - Plate insert
Tray 3.5 Locking System
Product No. Description
ZVT 820 Tray 3.5
ZVT 821 Tray 3.5 - Plate insert
-
29 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
ACCESSORIES ACCESSORIES
Tray 2.0/2.4 LC Locking System
Product No. Description
ZVT 920 Tray LC 2.0/2.4
Tray 2.7/3.5 LC Locking System
Product No. Description
ZVT 950 Tray LC 2.7/3.5
ZVT 951 Tray 2.7/3.5- Plate insert
TPLO Tray 2.7/3.5 Locking System
Product No. Description
ZVT 840 TPLO Tray 2.7/3.5
-
30 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
ACCESSORIES
Product No. Description
ZVT 850 Locking Screw Tray 2.7/3.5
Locking Screw Tray 2.7/3.5
Product No. Description
ZVT 850 Locking Screw Tray 2.7/3.5
Locking Screw Tray 2.0/2.4
Product No. Description
ZVT 860 Locking Screw Tray 2.0/2.4
ZVT-861-000 Locking Screw Tray 2.0/2.4 insert
Cortical Screw Tray 2.0/2.4
Product No. Description
ZVT 890 Standard Screw Tray 2.0/2.4
-
31 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
ACCESSORIES ACCESSORIES
Cortical Screw Tray 2.7/3.5
Product No. Description
ZVT 880 Standard Screw Tray 2.7/3.5
Tray Instruments 2.7/3.5 Locking System
Product No. Description
ZVT 960 Tray Instruments 2.7/3.5
Tray Instruments 2.0/2.4 Locking System
Product No. Description
ZVT 940 Tray Instruments 2.0/2.4
-
32
-
33
Zrinski AG d.o.o.
Gospodarska ulica 6
42202 Trnovec Bartoloveki
Croatia
www.zrinskiag.hr
Tel: 00385 42 68 44 60
1st registered manufacturer of implants
in veterinary medicine in Croatia
Reg.:UP/I-322-005/12-01/740
OPERATION TECHNIQUE Zrinski Locking System
-
34 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
OPERATION TECHNIQUE
Pre-operative planning using a sizing template
1. Fracture reduction
2. Choose and position the plate
Remove plate from set: Remove an appropriate plate with
the tweezers included in the set and hold it above the
fracture
Note:
In order to determine which system to use, for procedures that
indicate a use of reconstruction plates refer to the animal mass
chart below.
Adjust the plate: If neccesity for adjusting, make sure
adjusting occurs in bending zones between every locking
holes
Position the plate: If the plate geometrically fits it should be
positioned centrally over the fracture site
Animal mass chart
Puppies and small animals < 4kg 2.0mm locking system
Dogs and cats 4kg - 8kg 2.4mm locking system
Dogs 10kg - 20kg 2.7mm locking system
Dogs 20kg - 40kg 3.5mm locking system
Dogs > 40kg Double plating technique
-
35
OPERATION TECHNIQUE
Pre-operative planning using a sizing template
Note:
When possible avoid plate positioning that could, due to
forces and strain acting to the bone, negatively affect the
plate-screws construction, hence disrupting the mechanical
integrity and stability of the construction ending with possible
construction failure.
3. Secure position with K-Wires
If necessary, the position can be secured with 1.0mm or
0.8mm K-Wires using the K-Wire holes in the plate
4. Determine fixed point (1st screw) and pre-drill
We recommend fixing the first screw on one of the plate ends
in order to gradually fix the possibly multi-fractured bone with
the plate.
Select the drill guide according to the selected screw
diameter
Connect the appropriate drill bit to the drill machine and
pre-drill bi-cortically trough the drill guide with a tolerable
maximum angle of +/- 15
Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
-
36 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60 Fax: 00385 42 68 44 68
5. Determine screw length with depth gauge
Insert the depth gauge
Measure the depth to the opposite cortical side
Read the screw length
6. Remove screw out of the tray
Connect self-retaining screwdriver bit to AO-handle
Fix the pre-assembled screwdriver bit with light pressure
into the screw and remove it from the tray
7. Determine fixed point (1st screw)
Insert the selected screw into the pre-drilled screw hole.
Screw is self-tapping so it is enough to apply minimal
pressure to the screw, therefore to the bone
In order to guarantee an optimum stability and to reduce
the possibility of soft tissue irritation, insert the screw in a
way that the screw head is flush with the plate surface
Note:
It is suggested that first two screws on each side of the fracture are not fully engaged with the plate. After all the intended screws are inserted, but not fully engaged with the plate, final thightening, i.e. locking can take place, thus avoiding possible plate rotation, plate misslocation to the bone, soft tissue damage, or non intentional loss of reposition caused by the resistance of the screw locking into the plate.
OPERATION TECHNIQUE
Pre-operative planning using a sizing template
-
37 Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
8. Set remaining screws
Repeat steps 5 to 7
9. Removal of implants
Loosen all implant screws
Remove all implant screws
Remove plate
Note:
If the screws are not loosened before removing them, this causes the plate to rotate whilst removing the last screw, resulting in possible damage of the soft tissue.
Warning:
This operation instruction is not sufficient for an
immediate use of instruments. A detailed instruction
by an experienced surgeon or responsible person is
strongly recommended.
OPERATION TECHNIQUE
Pre-operative planning using a sizing template
-
38
Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
NOTES
-
39
Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia - www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68
-
- Zrinski AG d.o.o. - Gospodarska ulica 6, 42202 Trnovec Bartoloveki / Croatia -
- www.zrinskiag.hr - Tel: 00385 42 68 44 60, Fax: 00385 42 68 44 68 -