20140409 drillux型錄 a4八面
description
Transcript of 20140409 drillux型錄 a4八面
Patent drill with locking
drill bit series (1)
Patent drill with locking
drill bit series (1)
Phillips double ended
3.Remove the sleeve after drilling and use the phillips double ended drill bit to tighten the screw on the position needed.
Recommended usage for the products: 1. It is recommended that the drill driver should achieve between 2000
RPM and 4000RPM for optimal performance. 2. If the target is homogeneous tile, it is suggested to use a small amount
of water for better result.
High Speed Non-Slipping Exchangeable Concrete Drill Bit
Designed, Patented and Made in Taiwan. Australia and Multi-national patents.
Patent drill with locking drill bit series, is our company’s patent product. The series of concrete drill bit are made from European quality tungsten carbide and incorporated with Japanese high toughness steel material. Users can feel the sharpness and high level of toughness of these products during practical use. The biggest advantage of this product series is the signi�cant di�erence of time and e�ciency which compared with other products on the market. For tradi-tional products, construction may take up to eight hours. In contrast, the new generation of drill bits may shorten working hours to two or three hours, e�ectively reducing working time and sub-stantially increasing e�ciency.
3 pcs per set
Phillips double ended*1
Traditional working
Target of work
Durable for holes About 500 More than 50 More than 200 More than 15
Brick Wall and Concrete
Iron Sheet(thickness 1mm) Regular Tile Homogeneous tile
Patent Speci�cation 3.0 drill bit plus tube casing.
Replacement tip in design of screw-type is adapted for the concrete drill bit, high speed drilling and non-slipping.
The non-loosening design is applied on tube casing to increase working convenience.
The maximum e�ect of this patented product is that it can be incorporated with the cordless rechargeable drill driver for use in con�ned working spaces with no restriction.
Reference values for holes to work out
It e�ectively changes the traditional way of working which was drill �rst and then �x nylon sleeve by hammer, lock screws etc. The new patent prod-uct directly removes the sleeve after drilling and uses the phillips double ended drill bit to tighten the screw on the position needed.
It eliminates the problems associated with previous drill bit of the break-down of bathroom tiles and walls.
Reference value for e�ciency comparison
Patent drill with locking
drill bit series(2)
Patent drill with locking
drill bit series(2)
4-edge tip, super hard tungsten steel, easy to drill and faster
Can easily operate more than 5000 pounds for concrete
A powerful tool which can increase working convenience and speed with safety tube casing.
Drill & Drive Series for Female Expansion Bolts/ Expansion Bolts
1/4 “ (6.35mm)
Hexagonal Series
1/4 “ (6.35mm)
Hexagonal Series
The ¼ “(6.35mm) hexagonal series concrete drill utilizes high hardness tungsten steel, for extra torque. The series of this product has strong drilling ability which can signi�cantly increase working e�ciency and reduce working hours. Products of the series are able to be customized in order to meet individual customers’ needs for speci�cations and better quality control.
The straight stem
series drill bit
The straight stem
series drill bit
The straight stem series drill bit, it is of high toughness, high torque and high hardness!
Able to mold modi�cation, DIY drilling on cement walls and similar operations.
It also bene�ts those undertaking home improvement and various other construc-tion projects as both a creative-recreational and cost-saving activity.
The 4 ditches
series drill bit
The 4 ditches
series drill bit
The 4 ditches series drill bit, which is the most commonly used in the market and usually assigned for professionals. The edge of the 4 ditches series drill bit is sharp with fast drilling speed ability,equipped with high toughness, high torque and di�cult to break.Positive feedback from the market has also been received.
Distributed by Atical Collaborate International Co., Ltd. A Division of Atical International Pty Ltd ABN 34 166 950 2876 Arizona Crescent, White Rock QLD 4868Email: [email protected], Patented and Made in TaiwanAustralia and Multi-national Patents