2014 MINI DSG Reader DQ200+DQ250 Installation Manual

MINI DSG Reader DQ200+DQ250 Installation Manual

Step 1: Copy the software in the CD, paste them to your local

disk.

Step 2: Disable all Network Connection, including: the local

area connection, wireless network connection and 1394

connection.

Step 3: Open the MINI DSG Reader folder, click “run me first

registration entries”, and a windows dialogue popup reading:

Registry Editor„, click OK.

Email: [email protected] MSN: [email protected] Skype: eobd11 Yahoo: eobd11

www.eob

d2.n

et

Step 4: Click icon “DSG Reader” and a windows dialogue popup

displaying License expired, click OK, then another one popup showing

machine ID, press “ctrl+v” to paste, and click OK.


www.eob

d2.n

et

Step 5:


www.eob

d2.n

et

Create one txt file in the desktop and into it paste the machine ID, then

send it to your seller for activation.

Step 6: your seller send back the license file activated, cut it and paste it

in to the Mini DSG reader folder.


www.eob

d2.n

et

Step 7: right click the green icon “DSG Reader” to open it, then close the

appeared screen, and again right click “DSG Reader”-send

to-Desktop(create shortcut)


www.eob

d2.n

et

Step 8: connect the DSG reader to the computer and the car, then it will

popup windows “ found new hardware”, step-to-step to install it.


www.eob

d2.n

et

Step 9: click “my computer-device manager”, if you find “USB OBD II

cable”, it means the computer and the DSG reader establish

communication.


www.eob

d2.n

et

Step 10: Open the “Shotcut to DSGreader” in the desktop.


www.eob

d2.n

et

Now, you are ready to start to use DSG reader to read and write latest

dual-clutch DSG gearbox data for AUDI and VW.


www.eob

d2.n

et

2014 MINI DSG Reader DQ200+DQ250 Installation Manual

Technology

Transcript of 2014 MINI DSG Reader DQ200+DQ250 Installation Manual