2014 ECHO Bearcat saleshandbook
-
Upload
rick-cleghorn -
Category
Documents
-
view
334 -
download
21
description
Transcript of 2014 ECHO Bearcat saleshandbook
2 www.bearcatproducts.com
Horsepower Conversion Chart .............................3 Who Uses What ................................................4
Frequently Asked Questions All ECHO Bear Cat Products ...........................5-9Product Noise Levels .....................................10Chipper Commonalities ...................................11
CHIPPER/SHREDDERS2" – Model SC2170 ........................................123" – Models SC3206, SC3265 SC3305, SC3305E & SC3342 ...................13-14
CHIPPER/SHREDDER/BLOWER 5" – Model SC5720B ......................................15
CHIPPERS 4" – Model CH4400 ........................................16 5" – Model CH5653 ........................................17 6" – Models CH611DH & CH6730H ............18-19 8" – Turntable Models CH8720iH & CH8993H .........................20-21 9" – Models CH911DH & CH922DH ............22-23
PTO MACHINES 5" – Model SC5540 - Chipper/Shredder ............24 5" – Model SC5540B - Chipper/Shredder/Blower .................................254.5" – Model CH45540 ...................................26 4.5" – Models CH5540H & CH5540 ................27 8" – Model CH8540 ........................................28 9" – Models CH9540H & CHF9540H ..........29-30
SKID STEER CHIPPERS 4.5"- 8"
Models CH450H, CH500H & CH800H .............31
LOG SPLITTERS Models – LS22 & LS27 ...................................32
WHEELED TRIMMERS WT190, WT190T, WT190S .............................33Accessories ....................................................34
STUMP GRINDER Model – SG340 ..............................................35
WHEELED VACUUMS Models – WV190, WV190S, WV160 & WV160S .........................................36
DEBRIS LOADERS Models – DL8390, DL10570 ...........................37 Models – DL12653, DL12720 .........................38
GEARECHO Bear Cat Gear .......................................39
WARRANTY / PRODUCT CHARTS WARRANTY U.S. AND CANADA Current Models ...................................40-41 Non-Current Models ............................42-43
WARRANTY OUTSIDE U.S. AND CANADA Current Models ...................................44-45 Non-Current Models ............................46-47
Belts Reference Guide ....................................48 Rotor, Shredder/Chipper Replacement Kits ........49 Blade Kits Chart ........................................50-51
ACCESSORIES ..........................................52-59
TABLE OF CONTENTS
3888.625.4520
HP to cc CONVERSION CHART
*A non-current ECHO Bear Cat model number **Horsepower rating based on Engine Manufacturer at time of manufacture
GASOLINE ENGINES
Engine Manufacturer Engine Type cc Gross HP kW Model Number
Briggs & Stratton Horizontal 148 3.5** 2.6 70530*
Briggs & Stratton Vertical - 5** 3.7 74050*, 73350*
Honda Vertical-GCV - 5** 3.7 75050*, 75350*
Subaru Horizontal 170 5.7 4.3 SC2170, LS22
Honda Vertical-GCV 160 4.4 3.3 WT160S (73455), WT160T (74455), WV160, WV160S
Subaru Vertical 190 5.5 4.1 WT24, WT24S, WT24T
Briggs & Stratton Vertical-Intek 190 6** 4.8 WV190* (75060), WV190S* (75360)
Briggs & Stratton Vertical-Quantum 190 6.5** 4.8 WT190* (75065), WT190T* (76065), WT190S* (75365)
Briggs & Stratton Vertical/Elec.-Quantum 190 6.5** 4.8 WT190SE (73265)*
Briggs & Stratton Horizontal 205 5.5** 4.1 SC3206 (70050), SC2206
Subaru Horizontal 210 7 5.2 LS27
Honda Horizontal/Elec.-GX 242 8** 6.0 70385*
Subaru Horizontal 265 9 6.7 SC3265
Honda Horizontal-GX 270 8.5 6.4 SC3270 (70380)*, SC3270T (70580)*
Briggs & Stratton Horizontal/Elec. 305 8** 6.0 SC3305E (70085)
Briggs & Stratton Horizontal 305 8** 6.0 SC3305 (70080)
Briggs & Stratton Horizontal/IC 305 8** 6.0 70180*
Honda Vertical-GXV 340 8.9 6.6 SG340 (73711), 75011*
Honda Vertical/Elec.-GXV 340 8.9 6.6 75111*
Briggs & Stratton Horizontal-Intek 342 11** 8.3 SC3342 (75311)
Honda Horizontal-GX 390 11.7 8.7 DL8390, CH4390 (73413)*
Subaru Horizontal 404 14 10.4 CH4400
Briggs & Stratton Horizontal Vanguard 570 18 13.4 DL10570
Honda Horizontal/Elec.-GX 614 20** 14.9 SC5614 (71020)*, CH6614 (71620)*, CH6614H (72620)*
Subaru Horizontal/Elec. 653 22 16.4 CH5653,DL12653
Honda Horizontal/Elec.-GX 670 24** 17.9 CH6670H (76624)*, CH8670H (76824)*, SC5670 (75524)*, DL12670 (75124)*
Subaru Horizontal/Elec. 720 25 18.6 DL12720,SC5720B
Subaru Horizontal/Elec./Fuel Injected 720 28 20.9 CH8720iH
Briggs & Stratton Horizontal/Elec.-Vanguard 993 35 26.1 CH6993H (76635)*, CH8993H (76835)
Kohler Horizontal/Elec. 730 25 18.6 CH6730H
DIESEL ENGINESEngine Manufacturer Engine Type Liters Gross
HP kW Model Number
Kubota 1105/Mech. 1.1 25 18.5 CH611DH (76628)
Kubota 1105/Mech. 1.1 25 18.5 CH911DH (72928)
Kubota 2203/Mech. 2.2 48 35.9 CH922DH (74950)
4 www.bearcatproducts.com
Industry Product Used for
Ag - SpecialtyChipper/Shredder
Tobacco stalks
Animal bedding
Wheeled Vacuum Stable clean up
Cemetery
Chipper/Shredder Brush and tree pruning
Wheeled Trimmer Aesthetics
Wheeled Vacuum Leaf removal
FarmingChipper Shelter belt
clean out
Wheeled Trimmer Fence line clean up
Golf Course
Chipper Disposal of broken branches and fallen trees
Chipper/Shredder Create mulch for landscaping
Wheeled TrimmerHeavy grass and weed cleaning for ponds and creeks
Wheeled Vacuum Grass clipping tidy
Grounds and Maintenance
Chipper/Shredder Brush/hedge clean up
Wheeled Trimmer Fence clean up
Wheeled Vacuum Parking lots and stadium clean up
Debris LoaderCollecting grass
clippings and leaf removal
Home Owner with Acreage
Chipper/ShredderYard maintenance
Pruning
Wheeled TrimmerFence line
Riding trails
Wheeled Vacuum Leaf removal
Industry Product Used for
Landscaper
Chipper Job site clean up
Chipper/ShredderJob site clean up
Create mulch
Wheeled Vacuum Leaf removal
Debris Loader Leaf clean up
Municipalities
ChipperStorm damage
Palm frawn disposal
Wheeled Trimmer Overpass, road side maintenance
Wheeled Vacuum City park clean up
Debris LoaderStreet clean up
Leaf pick up
NurseriesChipper/Shredder
Dead plant recycling/moisture
control
Wheeled Trimmer Tree plots
Parks and Rec
Chipper/Shredder Trail maintenance
ChipperProperty
maintenance clean up
Wheeled TrimmerTrail maintenance
Fence lines
Wheeled Vacuum Parking lot clean up
Rental
Chipper/Shredder Compost/home owner clean up
Wheeled Vacuum Leaf removal
Stump Grinder Stump removal
Tree Service Chipper
Refuse reduction
Air quality protection
Power line clearing
Easements clearing
ECHO Bear Cat has a wide range of products to get the job done!
WHO USES WHAT
5888.625.4520
FAQ
CHIPPER/SHREDDERSMODELS: SC2170, SC3206, SC3265, SC3305, SC3305E**, SC3342, SC5540, SC5540B* & SC5720B**
What are these machines designed for? The ECHO Bear Cat chipper/shredders are designed to effectively reduce the volume of wood, leaves and other organic material.
When should I chip? If you don’t plan on composting the material, material is green and stringy or larger than .75" in diameter.
When should I shred? If you plan on composting or if the material is smaller than .75", use the shredder. Shredding is also an efficient way to reduce the volume of leaves or prunings.
How long will the chipper blades last? Depending on the type of wood, age and cleanliness, chipper blades will work well for between 5-15 hours. Dry, dirty wood will dull the blades faster. Alternate dry and wet material to extend blade life.
What is the maximum size of material will these machines chip or shred? ECHO Bear Cat 2" chipper/shredders will chip up to 2" (5cm) and shred up to .75" (2cm) diameter material. ECHO Bear Cat 3" chipper/shredders will chip up to 3" (8cm) and shred up to .75" (2cm) diameter material. ECHO Bear Cat 5" chipper/shredders will chip up to 5" (13cm) and shred up to .75" (2cm) diameter material.
Do not attempt to put material larger than .75" in diameter into the shredder hopper. Doing so may cause machine failure and will void the warranty. *PTO Machines
**Electric start models do not include battery.
LOG SPLITTERSMODELS: LS22 & LS27
What is the cycle time? The LS22 has a cycle time of 12 seconds and the LS27 has a cycle time of 14 seconds.
Does my splitter come with hydraulic fluid? The hydraulic system on this log splitter comes filled with high performance Automatic Transmission Fluid (ATF) to accommodate operation in temperatures below 32 degrees F (0 degrees C). When adding or replacing ATF, use a Dexron® III or Mercon® qualified product. Check the fluid on level ground with the jack stand in the down position. DO NOT MIX HYDRAULIC FLUID WITH ATF. THIS MAY DAMAGE THE SYSTEM AND COULD VOID WARRANTY. DO NOT OVERFILL. FILL THE HYDRAULIC FLUID TANK WITH THE RAM RETRACTED.
What size logs can I split? The maximum length of log that you can split is 24" (60.9cm) long. You can split larger diameter logs with the unit in the vertical position.
How difficult is it to perform maintenance on the machine? ECHO Bear Cat products are designed with ease of maintenance in mind. Proper maintenance is vital and should be performed routinely with blades, belts and bearings being most important.
6 www.bearcatproducts.com
FAQ
WHEELED TRIMMERSMODELS: WT190, WT190T & WT190S
Can I operate the Wheeled Trimmer on a hillside? The ECHO Bear Cat Wheeled Trimmer is capable of continuous operation on a slope not to exceed 15 degrees. Limited operation on slopes greater than 15 degrees is allowed.
Do the engines have an oil pump? No. The engines obtain lubrication from a “Splash Lube” system.
How do I change the trimming line? To wrap the cutting string in the standard configuration, feed the cutting string through the second hole on either end of the trimmer head leaving approximately 8 inches for the cutting surface. Total recommended string length is 20-1/2". Continue by weaving the cutting string through the first hole directly beside the second hole. Loop the cutting string back and feed through the first hole on the opposite end of the trimmer head. Pull the cutting string tight. Feed through the remaining second hole and pull the cutting string tight. The cutting strings in the middle two holes should be the same length. If the length differs, cut to an even length. It may be necessary to remove pieces of broken or worn string before new string can be properly installed.
How many speeds does the Self-Propelled Wheeled Trimmer (WT190S) have and how fast does it go? There are three separate gears on the transmission of the Self-Propelled Wheeled Trimmers, and the speeds range from 1 to 3 mph.
What is the Sabre Tooth Blade and Triple Blade Brush Cutter used for? The Sabre Tooth Blade (14" dia.) is designed to be used for cutting small trees, saplings, bushes etc. up to 4" in diameter. The Nylon Blade Kit is designed for the heavy grass, weeds and brush growth.
Do the Sabre Tooth blade and Triple Blade Brush Cutter fit all WT190 models? Yes. By removing the mow ball both accessories will work and can be height adjusted to preference.
How difficult is it to perform maintenance on the machine? ECHO Bear Cat products are designed with ease of maintenance in mind. Proper maintenance is vital and should be performed routinely with blades, belts and bearings being most important.
STUMP GRINDER MODEL: SG340
What is the application of the Stump Grinder? The ECHO Bear Cat Stump Grinder is designed with a compact 23" wheel base, enabling it to be used on stumps found in places large stump grinders cannot get to.
How do I engage the Stump Grinder? Position the stump grinder so the cutter head is adjacent to the stump. Start the stump grinder and hold up the bottom bail so it doesn't shut off. Pull the top bail to the handle and hold it there to activate the left wheel brake, holding it so it does not turn. Gradually, using the locked left tire as a pivot point, slowly pivot the cutter head until the cutting teeth contact the stump. Pivot the stump grinder on the left wheel in a slow, smooth sweeping motion from left to right as the teeth grind the stump. Do not force the cutting teeth. Check position by watching through the screen opening. Grind the stump down to a maximum of 4 inches below ground level.
How difficult is it to perform maintenance on the machine? ECHO Bear Cat products are designed with ease of maintenance in mind. Proper maintenance is vital and should be performed routinely with blades, belts and bearings being most important.
7888.625.4520
FAQ
CHIPPERSMODELS: CH4400, CH45540, CH5653, CH5540, CH5540H, CH611DH, CH6730H, CH8540, CH8993H, CH8720iH, CH9540H, CHF9540H, CH911DH & CH922DH
What are these machines designed for? The ECHO Bear Cat chipper is designed to effectively reduce the volume of wood, branches, and other organic material. The typical application for this product group is anywhere from light commercial to municipalities and/or rental.
What types of chippers are available? ECHO Bear Cat makes chippers with gravity or hydraulic feed, powered by an engine package or a tractor PTO. A hydraulic feed machine has a hydraulic driven feed roller to efficiently feed branches to the chipper rotor.
When should I buy a gravity feed machine? If you have an infrequent need for a chipper and time is not a factor, a gravity feed machine will fit your needs.
When should I buy a hydraulic feed machine? If time or efficiency is an issue, a hydraulic feed chipper allows you to be more productive.
What does it mean when you say hydraulic feed chippers feature an "Auto Feed" system? "Auto Feed" refers to the way the system senses if the rotor has slowed down too much for maximum chipping performance. When this happens, the feed roller stops feeding the material, allowing the engine and rotor RPM to recover. Once the engine and rotor RPM have recovered sufficiently, the feed roller reengages and begins feeding material again. It has also been referred to as the "try again" feature.
How long will the chipper blades last? Depending on the type of wood, age and cleanliness, chipper blades will work well for between 5-15 hours. Dry, dirty wood will dull the blades faster. Alternate dry and wet material to extend blade life. Hydraulic feed chippers will have longer blade life.
How difficult is it to perform maintenance on the machine? ECHO Bear Cat products are designed with ease of maintenance in mind. Proper maintenance is vital and should be performed routinely with blades, belts and bearings being most important.
Will electric start chippers include the starting battery? No. ECHO Bear Cat products are not shipped with a battery and will need to be purchased separately.
POWER TAKE OFF (PTO) MACHINES MODELS: CH45540, CH5540, CH5540H, SC5540, SC5540B, CH8540, CH9540H & CHF9540H
When do I buy a chipper powered by a tractor Power Take Off (PTO) vs. an engine-driven unit? If you own a tractor a PTO chipper is a smart economic choice.
What are the tractor requirements for these chippers and chipper/shredders? The ECHO Bear Cat 4.5" chipper requires a tractor with PTO hp ranging from 15hp to 28hp. The ECHO Bear Cat 5" chippers and chipper/shredders require a tractor with PTO hp ranging from 25hp to 45hp. The ECHO Bear Cat 8" and 9" chippers require a tractor with PTO hp ranging from 35hp to 60hp.
Will the chipper fit my tractor? The ECHO Bear Cat chippers and chipper/shredders are designed to fit all Category 1 three-point hitches. Chipper weight and tractor hp needs to be taken into consideration. All Chipper models fit a Category 1 Quick Hitch.
8 www.bearcatproducts.com
FAQ
SKID STEER CHIPPERS MODELS: CH450H, CH500H & CH800H
What is this machine designed for? The ECHO Bear Cat chipper is designed to effectively reduce wood, brush, and other organic material while using your skid steer as the power unit.
What is the capacity and hydraulic flow requirements of these machines? The CH450H has a maximum capacity of 4.5" (11cm) and requires at least 11 to 15 GPM (41.6 to 56.8 LPM) on a mini skid steer. The CH500H has a maximum capacity of 5" (13cm) and requires at least 15 to 22 GPM (56.7 to 83.3 LPM) on a low-flow skid steer. The CH800H has a maximum capacity of 8" (20cm) and requires at least 25 to 38 GPM (94.6 to 43.8 LPM) on a hi-flow skid steer.
Will the chipper fit my skid steer? The ECHO Bear Cat CH500H and CH800H skid steer chippers are equipped with universal attachment ends, capable of hooking up to most skid steers. The CH450H is designed to mount to mini skid steers.
How long will the chipper blades last? Depending on the type of wood, age and cleanliness, chipper blades will work well for between 5-15 hours. Dry, dirty wood will dull the blades faster. Alternate dry and wet material to extend blade life. Hydraulic feed chippers will have longer blade life.
How difficult is it to perform maintenance on the machine? ECHO Bear Cat products are designed with ease of maintenance in mind. Proper maintenance is vital and should be performed routinely with blades, belts and bearings being most important.
WHEELED VACUUMSMODELS: WV190, WV190S, WV160 & WV160S
Where can I use the Wheeled Vacuum? The Wheeled Vacuum is designed to be used for residential, commercial or municipal pickup of leaves, grass or other light debris.
How much reduction of debris will I get? There is not much reduction; however, by passing through a six-bladed fan into the bag some natural breakage occurs allowing the five-bushel bag to be filled. Reduction through compaction will happen.
Is it hard to push the Wheeled Vacuum on turf? The large wheels have ball bearing hubs that allow easy movement.
How many speeds do the Self-Propelled Wheeled Vacuums have and how fast does it go? There are three separate gears on the transmission of the Self-Propelled Wheeled Vacuum, and the speed range is 1 to 3 mph.
How many height adjustments does the Wheeled Vacuum have? The Wheeled Vacuum can be adjusted into four different nozzle settings ranging from .25" - 4.5" (.64cm-11.4cm) to accommodate all types of terrain.
What do I use the optional 4" (10.1cm) Vacuum Hose Kit for? This hose kit is designed to allow vacuuming hard to reach places.
How difficult is it to perform maintenance on the machine? ECHO Bear Cat products are designed with ease of maintenance in mind. Proper maintenance is vital and should be performed routinely with blades, belts and bearings being most important.
9888.625.4520
FAQ
DEBRIS LOADERSMODELS: DL8390, DL10570, DL12653 & DL12720
What is the application for the Debris Loader? The Debris Loader is used for commercial or municipal pickup of leaves, grass, or other light debris.
How much reduction of debris will I get? There is very limited reduction of the material due to the design for compaction vs. reduction. The Debris Loader is designed to effectively load leaves, grass, or other light debris from the ground to a vehicle collection bin.
Is there a rental application for this machine? Yes. Commercial landscapers and municipalities will have a seasonal need for this piece of equipment.
How difficult is it to perform maintenance on the machine? ECHO Bear Cat products are designed with ease of maintenance in mind. Proper maintenance is vital and should be performed routinely with blades, belts and bearings being most important.
Will electric start Debris Loaders include the starting battery? No. ECHO Bear Cat products are not shipped with a battery and will need to be purchased separately.
I have a chipper that requires the belt to be engaged. How do I engage and disengage the belt without it squealing and causing damage to the belt or other drive components?ENGAGING THE BELT:
1. AFTER engine is warmed and ready for use, move the throttle control back down to approximately 25% of full throttle.
2. When engine is running at approximately 25% of full throttle, SLOWLY engage belt by using the belt engagement .
DO NOT engage the belt with engine running at high RPM. Engaging belt while engine is running at high RPM WILL result in significant belt squealing and possible damage.
Engaging belt while engine is running at high RPM may also damage vital drive components of the chipper or chipper/shredder,
3. If the chipper engine stalls while engaging the belt, return the belt engagement back to the START position, restart engine, SLIGHTLY increase throttle and attempt engagement again.
4. Once the belt is engaged, SLOWLY increase throttle to 100% or full throttle.
5. ALWAYS run the machine at 100% or full throttle when chipping or shredding material.
ENGINE SHUTDOWN/BELT DISENGAGEMENT:
1. WITH THE BELT STILL ENGAGED, SLOWLY move the throttle to the SLOW position.
2. Allow the engine to run at slow idle for 30-60 seconds. This will slow the rotor down to the same RPM as the engine.
3. Stop the engine by moving the throttle to the STOP position or turning off the ignition switch.
4. Allow rotor to come to a complete stop.
5. Once the engine is off and the rotor has completely stopped, the belt can be disengaged by moving the belt engagement back to the START position.
NEVER disengage the belt as part of the stopping or shut down process. The belt should remain engaged during the entire shut-down process.
Leaving the belt engaged is a vital part of proper shutdown and ensures the rotor stops spinning in conjunction with the engine shutting off.
10 www.bearcatproducts.com
PRODUCT NOISE LEVELS
Model Description dB (Pressure)
dB(Power Level)
CHIPPER/SHREDDERSSC2170 2" (5cm) Capacity – Subaru SP 170cc 97 111
SC3206 3" (7.6cm) Capacity – Briggs & Stratton OHV 205cc 97 111
SC3265 3" (7.6cm) Capacity – Subaru EX 265cc 97 111
SC3305 3" (7.6cm) Capacity – Briggs & Stratton OHV 305cc 98 112
SC3305E 3" (7.6cm) Capacity – Briggs & Stratton OHV 305cc, Electric Start 98 112
SC3342 3" (7.6cm) Capacity – Briggs & Stratton OHV 342cc 94 114
CHIPPER/SHREDDER/BLOWERSC5720B 5" (13cm) Capacity Chipper/Shredder/Blower Subaru 720cc 97 120
LOG SPLITTERSLS22 Subaru SP 170cc N/A N/A
LS27 Subaru SP 210cc N/A N/A
WHEELED TRIMMERSWT190 Briggs & Stratton Quantum 190cc 87 101
WT190T Briggs & Stratton Quantum 190cc 87 101
WT190S Briggs & Stratton Quantum 190cc 87 101
STUMPGRINDERSG340 Honda 340cc 73 87
CHIPPERSCH4400 4.5" (11cm) Subaru EX 404cc 93 107
CH5653 5" (13cm) Capacity – Subaru EH 653cc 92 109
CH611DH 6" (15cm) Capacity – Kubota Diesel 1.1 Liter with Hydralic Feed 94 111
CH6730H 6" (15cm) Capacity – Kohler Command Pro 730cc with Hydraulic feed 94 117
CH8720iH 8" (20cm) Capacity – Subaru 720cc – Turntable with Hydraulic Feed 96 114
CH8993H 8" (20cm) Capacity – Briggs & Stratton Vanguard 993cc – Turntable with Hydraulic Feed 94 114
CH911DH 9" (23cm) Capacity – Kubota 1.1 Liter Diesel with Hydraulic Feed 95 112
CH922DH 9" (23cm) Capacity – Kubota 2.2 Liter with Hydraulic Feed 95 112
PTO CHIPPERS AND CHIPPER/SHREDDERSCH45540 4.5" (11cm) Capacity – 540 PTO – 15-28 hp Input Range 87* 107
CH5540 5" (13cm) Capacity – 540 PTO – 25-45 hp Input Range 86* 103
CH5540H 5" (13cm) Capacity – 540 PTO with Hydraulic Feed – 25-45 hp 86* 103
SC5540 5" (13cm) Capacity – 540 PTO – Chipper/Shredder – 25-45 hp Input Range 99* 113
SC5540B 5" (13cm) Capacity – 540 PTO – Chipper/Shredder – PTO - 25-45 hp 99* 113
CH8540 8" (20cm) Capacity – 540 PTO – 35-60 hp Input Range 95* 112
CH9540H 9" (23cm) Capacity – 540 PTO with Hydraulic Feed - 35-60 hp 95* 112
CHF9540H 9" (23cm) Capacity – 540 PTO with Hydraulic Feed - 35-60 hp 95* 112
WHEELED VACUUMSWV160 160cc Honda OHC 84 98
WV160S 160cc Honda OHC - Self-Propelled 84 98
WV190 190cc Briggs & Stratton OHV 84 98
WV190S 190cc Briggs & Stratton OHV - Self-Propelled 84 98
DEBRIS LOADERSDL8390 Honda GX 390cc – 8" (20.3cm) Intake 116 134
DL10570 Briggs & Stratton Vanguard 570cc – 10" (25.4cm) Intake 120 138
DL12653 Subaru EH 653cc – 12" (30.5cm) Intake 97 120
DL12720 Subaru EH 720cc – 12" (30.5cm) Intake 99 122
These values were obtained using harmonized EN ISO 3744:2010*based off towable model
11888.625.4520
CHIPPERS
14" (35.6cm) rotor weighing 49 lbs. (22.2kg) fully assembled• 1" (2.5cm) thick machine balanced cantilever rotor• Models: CH4400, CH45540 & CH450H• Standard 4.5" x 9" (11.4cm x 22.9cm) discharge chute. Optional discharge chute is 4.5" (11.4cm) square• 13" x 14.5" (33cm x 36.8cm) feed chute• Two reversible heat-treated steel chipper blades• Four-sided cutter bar/anvil• Chipper Blade Kit: P/N: 76295-00
20" (50.8cm) rotor weighing 140 lbs. (63.5kg) fully assembled• 1.25" (3.2cm) thick machine balanced• 4" (10cm) and 5" (13cm) chippers, Models CH5540, CH500H, CH5540H & CH5653 – same chipper body• 6" (15cm) discharge chute rotating 360 degrees• 5.5" x 7" (14cm x 17.8cm) feed opening• Reversible heat-treated steel chipper blades.• Four-sided adjustable steel anvil/cutter bar• Double-banded belt drive, except model CH500H is hydraulic driven – no belts• Chipper Blade Kit: P/N: 72493
26" (66cm) rotor weighing 165 lbs. (74.8kg) fully assembled• 1" (2.5cm) thick machine balanced cantilever rotor• Chipper Models: CH6730H & CH611DH• 6.7" (17cm) square discharge chute• 6.5" x 13.5" (16.5cm x 34.3cm) feed chute for easy feeding of limbs• Four reversible heat-treated steel chipper blades• Four-sided anvil/cutter bar mounted on the side of the feed chute• Triple-banded belt• New style local sensing two-stage pump with live hydraulics• SmartFeed Sensor• Hand-operated belt engagement lever• Chipper Blade Kit: P/N: 76293-00
30" (76.2cm) rotor weighing 275 lbs. (124.7kg) fully assembled• 1.25" (3.2cm) thick machine balanced• 9" (23cm) machine – Model CHF9540H• 6" (15cm) diameter square discharge. Discharges toward the ground from a height of 34" (86cm)• 9" x 9" (23cm x 23cm) feed throat opening• 16 reversible heat-treated steel chipper blades • Four-sided adjustable steel anvil/cutter bar• Triple-banded belt drive• Chipper Blade Kit: P/N: 74830-00
30" (76.2cm) rotor weighing 275 lbs. (124.7kg) fully assembled• 1.25" (3.2cm) thick machine balanced• 8" (20.3cm) and 9" (23cm) machines• Models CH800H, CH8720iH, CH8993H, CH8540, CH9540H, CH911DH & CH922DH – same chipper body• 8" (20.3cm) discharge chute rotating 360 degrees• 9" x 9" (23cm x 23cm) feed throat opening• Four reversible heat-treated steel chipper blades• Four-sided adjustable steel anvil/cutter bar• Triple-banded belt drive, except model CH800H is hydraulic driven – no belts• Chipper Blade Kit: P/N: 76293-00
CHIPPER COMMONALITIES
12 www.bearcatproducts.com
CHIPPER/SHREDDERS
ENGINE• Subaru SP 170cc
• Max torque: 8.3 ft-lbs at 2,500 rpm, runs at 3,800 rpm
FUEL CAPACITY• .9 gal. (3.4 liters)
DIRECT DRIVE
FEED CHUTES• Shredder hopper is 16" x 20" (40.6cm x 50.8cm)
• Maximum shredder capacity of up to .75" (2cm)
• Maximum chipper feed size of up to 2" (5cm)
CHIPPING BLADES & SHREDDING KNIVES• Two reversible heat-treated steel chipper blades
• Blade Dimensions: 3.125" x 2" x .25" (8cm x 5cm x .6cm)
• Four reversible Shredder Knives (standard)
• Four additional Shredder Knives optional
CHIPPER/SHREDDER ROTOR ASSEMBLY• Rotor weight is 15 lbs. (6.8kg)
• Rotor turns at 3,800 rpm
• 12.8" diameter (32.6cm)
EASY TO TRANSPORT• Easy grip wide handle
• Weight of machine is distributed evenly throughout
DISCHARGE SCREEN• Comes standard with 1.13" screen (2.9cm)
MACHINE DIMENSIONS AND WEIGHT• LxWxH – 29" x 23" x 50" (74cm x 58cm x 127cm)
• 120 lbs. (54.4kg)
SAFETY• Meets ISO safety decal standards
PARTS & ACCESSORIES• Standard Screen 1.13" (2.8cm) (P/N: 76758-35)
• Fine Screen .75" (2cm) (P/N: 76893-35)
• Wet Debris Screen (P/N: 77639-35)
• Shredder Knives Kit (P/N: 77616-00)
• Additional Shredder Knives Kit (P/N: 77618-00)
• Chipper Blade Kit (P/N: 70738)
• Hour/Tach Kit (P/N: 31605-00)
2" (5cm) CAPACITY CHIPPER/SHREDDERModel: SC2170
.75" FineWet
Debris1.13"
Standard
SC2170 Debris Screens
13888.625.4520
ENGINESSC3206• Briggs & Stratton OHV 206cc• Max torque: 9 ft-lbs. at 2,700 rpm, runs at 3,600 rpm
SC3305• Briggs & Stratton OHV 305cc
• Max torque: 14.5 ft-lbs. at 2,800 rpm, runs at 3,600 rpm
SC3305E• Briggs & Stratton OHV 305cc – Electric Start
• Max torque: 14.5 ft-lbs. at 2,800 rpm, runs at 3,600 rpm
SC3265• Subaru EX 265cc
• Max torque: 13.7 ft-lbs. at 2,500 rpm, runs at 3,800 rpm
SC3342• Briggs & Stratton OHV 342cc
• Max torque: 16.5 ft-lbs. at 2,800 rpm, runs at 3,600 rpm
FUEL CAPACITY• SC3206 - .8 gal (3 liters)
• SC3265 - 1.6 gal (6.1 liters)
• SC3305, SC3305E, SC3342 - 1 gal. (3.8 liters)
CHIPPER/SHREDDER ROTOR ASSEMBLYSC3206• Weighs 21 lbs. (9.5kg)
• Rotates at 3,600 rpm
• 1" (2.5cm) diameter rotor shaft
• 12" diameter (30.4cm)
SC3265, SC3305, SC3305E, SC3342• Weighs 27 lbs. (12.3kg)
• Rotates at 3,600 rpm
• 1" (2.5cm) diameter rotor shaft
• 12" diameter (30.4cm)
CHIPPER BLADES & SHREDDER KNIVES• Two reversible heat-treated chipper steel blades
• Blade Dimensions: LxWxH: 3.125" x 2"x .25" (7.6cm x 5cm x 6cm)
• Eight Reversible Shredder Knives – SC3206
• Twelve Reversible Shredder Knives SC3265, SC3305, SC3305E, SC3342
BEARINGS• Two 1" (2.5cm) greasable bearings with three bolt cast
flanges
BELT DRIVE • With manual belt engagement
• SC3206, SC3305, SC3305E – single belt driven
• SC3265, SC3342 - dual belt driven
• Spring-loaded belt tensioner
FEED CHUTES• Shredder hopper is 12" x 25" (30.5cm x 63.5cm)
• Maximum shredder capacity of up to .75" (2cm)
• Maximum chipper feed size of up to 3" (7.6cm)
SIDE DISCHARGE• You don’t have to move the equipment as often with a side
discharge as you do with a bottom discharge
• Heavy-duty 7 gauge steel screens available in four different sizes to fit your needs
CONVENIENT TRANSPORTATION• Handle placement for the best control over various terrain,
or tip it back and use the hopper handle for transporting on a smooth surface
• Pneumatic tires feature grease zerks, enabling easy greasing of the hub
3" (7.6cm) CAPACITY CHIPPER/SHREDDERS 1 of 2
Models: SC3206, SC3265, SC3305, SC3305E & SC3342
CHIPPER/SHREDDERS
14 www.bearcatproducts.com
CHIPPER/SHREDDERS
HEAVY-DUTY CONSTRUCTION• Extra strength and reinforcements in areas that matter
most
• 14 gauge (1.9mm) steel construction
• Built to last with welded construction instead of bolt together.
MACHINE DIMENSIONS
• LxWxH – 40" x 25" x 46" (101cm x 64cm x 117cm)
WEIGHTS
• SC3206 - 195 lbs. (88.5kg)
• SC3265 - 250 lbs. (113.4kg)
• SC3305 - 228 lbs. (103.4kg)
• SC3305E - 240 lbs. (108.9kg)
• SC3342 - 263 lbs. (119.3kg)
PARTS & ACCESSORIES• Two-Wheel Tow Kit (P/N: 77000-00)
• Leaf Tamper (P/N: 70089)
• Debris Bag with Handles (P/N: 17854)
• All Weather Cover (P/N: 70093)
• Chipper Blade Kit (P/N: 70738)
• Tach/Hour Meter (P/N: 31605-00)
• Road Towable Chipper/Shredder Trailer (P/N: 77353-00)
• Supplemental Adapter Kit for models SC3265, SC3305, SC3305E & SC3342 Serial C03477 & below (P/N: 77700-00)
• Supplemental Adapter Kit for model SC3206 Serial C03477 and below (P/N: 77701-00)
PARTS & ACCESSORIES
SC3206
• Screen - Fine .375" (.95cm) (P/N: 77382-12)
• Screen - Medium .75" (2cm) (P/N: 77383-12)
• Screen - Coarse Standard 1.375" (3.5cm) (P/N: 77384-12)
• Screen - Wet Debris (P/N: 77385-12)
• Shredder Knives Kit – SC3206 (P/N: 77589-00)
SC3265, SC3305, SC3305E, SC3342
• Screen - Fine .375" (.95cm) (P/N: 77386-12)
• Screen - Medium .75" (2cm) (P/N: 77387-12)
• Screen - Coarse Standard 1.375" (3.5cm) (P/N: 77388-12)
• Screen - Wet Debris (P/N: 77389-12)
• Blower Attachment (P/N: 70251)
• Shredder Knives Kit (P/N: 70973)
3" (7.6cm) CAPACITY CHIPPER/SHREDDERS 2 of 2
Models: SC3206, SC3265, SC3305, SC3305E & SC3342
A 1.375" debris screen is standard with three others available depending on desired mulch size/type.
.375"
.75"
1.375" Standard
Wet
Debris
Debris Screens
15888.625.4520
CHIPPER/SHREDDER/BLOWER
ENGINE• Subaru EH 720cc
• Max torque: 39.5 ft-lbs. at 2,500 rpm, runs at 3,600 rpm
FUEL CAPACITY• 9 gal. (34.1 liters)
CHIPPER/SHREDDER ROTOR ASSEMBLY• Weighs 121 lbs. (54.9kg)
• Machine balanced
• Rotates at 2,000 rpm
• 1.5" (3.8cm)-diameter rotor shaft
• 20.6" (52.3cm) diameter
• Easily accessible through the hinged cover, when open it exposes one half of the rotor for easy access to the chipping blades and makes for easy clean out
CHIPPER BLADES & SHREDDER KNIVES• Four reversible heat-treated chipper steel blades
• Blade Dimensions: 3.125" x 2" x .25" (7.6cm x 5cm x 6cm)
• 36 Shredder Knives
BEARINGS• Two 1.5" (3.8cm) greasable bearings with two bolt
cast flanges
DOUBLE-BANDED BELT DRIVE • Manual belt engagement
• Spring-loaded belt tensioner
FEED CHUTES• Shredder hopper is 13" x 18" (33cm x 48.7cm)
• Maximum shredder capacity of up to .75" (2cm)
• Maximum chipper feed size of up to 5" (12.7cm)
INTEGRATED DISCHARGE • With a 360° rotatable, 6" (15.25cm) diameter steel
tubing with adjustable spout cap allows you to put the chips where you want them the first time
• Discharge height is 92" (234cm)
UNIQUE SCREENLESS SHREDDER• Unique product, self-feed chipper/shredder without a
screen. This greatly reduces the chance of plugging, especially with damp material
HEAVY-DUTY CONSTRUCTION• 7 gauge steel
HIGHWAY TOWABLE• 50" (127cm) tread width (center to center) and 5.3-12
tires with 1,000 lb. (454kg) torsion axle suspension enables the chipper to be easily towed down the highway
TOWING WEIGHT• 930 lbs. (422kg) with fluids at capacity
HITCH• 2" (5cm) ball coupler is standard
MACHINE DIMENSIONS• LxWxH – 92" x 52" x 92" (233cm x 131cm x 233cm)
SAFETY• Meets ISO safety decal standards
• Safety chains
• 12 volt tail lights standard
• Meets NATM Certification
PARTS & ACCESSORIES• Chipper Blade Kit (P/N: 72493)
• Shredder Knives Kit (P/N: 77613-00)
5" (13cm) CAPACITY CHIPPER/SHREDDER/BLOWERModels: SC5720B
16 www.bearcatproducts.com
CHIPPERS4" (10cm) CAPACITY CHIPPER
Model: CH4400
ENGINE• Subaru EX 404cc
• Max torque: 20 ft-lbs. achieved at 2,400 rpm operates at 3,800 rpm
FUEL CAPACITY• 1.85 gal. (7 liters)
14" (35.6cm) DIAMETER CANTILEVER ROTOR• 14" (35.6cm) diameter by 1" (2.5cm) thick rotor
• Weighs 49 lbs. (22.2kg)
• Machine balanced
• Rotates at 3,000 rpm
• 1.25" (3.2cm) diameter rotor shaft
TWO CHIPPING BLADES• Two reversible heat-treated steel chipper blades
• Blade Dimensions: 5" x 4" x .5" (12.7cm x 10.2cm x 1.3cm)
BEARINGS• Two 1.25" (3.2cm) greasable bearings with
two bolt cast flanges
BELT DRIVE• Double-banded belt drive with manual belt
engagement
• Spring-loaded belt tensioner
ANVIL/CUTTER BAR• Four-sided adjustable to insure good chipping ability
• 5" long x 1.75" wide x .375" thick (12.7cm x 4.4cm x .95cm)
FEED CHUTE• Opening 13" x 15" (33cm x 38cm), 38" (96.5cm)
off the ground
• Feed throat opening is 5" x 5" (12.7cm x 12.7cm)
• Maximum feed size of up to 4" (10cm)
INTEGRATED DISCHARGE• Standard Discharge
4.5" x 9" (11.4cm x 22.9cm) and discharges towards the ground, from a height of 14" (36cm)
• Optional Discharge 4.5" x 4.5" (11.4cm x 11.4cm) square discharge with adjustable deflector, discharges at a height of 55" (140cm)
HEAVY-DUTY CONSTRUCTION• 7 gauge steel throughout housing with welded
construction
• Trailer is made of 7 gauge steel
• Tongue is 2" x 2" (5cm x 5 cm) with 11 gauge wall thickness
HIGHWAY TOWABLE• 43" (109cm) tread width (center to center) and
4.80-8 tires with 1,000 lb. (454kg) torsion axle suspension enables the chipper to be easily towed down the highway
• 12 volt safety and directional lighting and tow chains are standard
TOWING WEIGHT• 536 lbs. (243kg)
HITCH• 2" (5cm) ball coupler is standard
MACHINE DIMENSIONS• LxWxH – 75" x 51" x 45" (190cm x 129cm x 114cm)
SAFETY• Meets ISO safety decal standards
• Safety chains
• 12 volt tail lights standard
• Meets NATM Certification
PARTS & ACCESSORIES• Blade Kit (P/N: 76295-00)
• Optional Discharge Chute 4.5" x 4.5" (11.4cm x 11.4cm) (P/N: 74634-00)
• Tach/Hour Meter Kit - Gas (P/N: 31605-00)
17888.625.4520
CHIPPERS5" (13cm) CAPACITY CHIPPER
Model: CH5653
ENGINE• Subaru EH engine 653cc
• Max torque: 33.6 ft-lbs. at 2,500 rpm, runs at 3,800 rpm
FUEL CAPACITY• 9 gal. (34.1 liters)
20" (51cm) DIAMETER ROTOR• 20" (51cm) diameter by 1.25" (3.2cm) thick rotor
• Weighs 140 lbs. (63.5kg)
• Machine balanced
• Rotates at 2,000 rpm
• 1.5" (3.8cm) diameter rotor shaft
• Easily accessible through the hinged cover, when open it exposes one half of the rotor for easy access to the chipping blades and makes for easy clean out
FOUR CHIPPING BLADES• Four reversible heat-treated steel chipper blades
• Blade Dimensions: 3.1" x 2" x .25" (7.9cm x 5cm x .6cm)
BEARINGS• Two 1.5" (3.8cm) greasable bearings with two bolt cast
flanges
BELT DRIVE• Double-banded belt drive with manual belt engagement
• Spring-loaded belt tensioner
ANVIL/CUTTER BAR• Four-sided adjustable
• 5.6" long x 4" wide x .375" thick (14.2cm x 10.2cm x .95cm)
FEED CHUTE• Opening 27" x 28" (68.6cm x 71.1cm)
43.8" (111cm) off the ground
• Feed throat opening is 5.5" x 6" (14cm x 15.2cm)
• Maximum feed size of up to 5" (12.7cm)
INTEGRATED DISCHARGE• With a 360° rotatable, 6" (15.2cm) diameter steel tubing
with adjustable spout cap allows you to put the chips where you want them the first time
• Discharge height is 95" (2.4m)
HEAVY-DUTY CONSTRUCTION• .25" (6.35cm) steel housing with welded
construction
• Trailer is made of 7 gauge steel
• Tongue is 2" x 2" (5cm x 5 cm) with .25" (6.35mm) wall thickness
HIGHWAY TOWABLE• 44" (112cm) tread width (center to center) and 5.30-12
tires with 1,000 lb. (454kg) torsion axle suspension en-ables the chipper to be easily towed down the highway
• 12 volt safety and directional lighting and tow chains are standard
TOWING WEIGHT• 950 lbs. (431kg)
HITCH• 2" (5cm) ball coupler is standard
MACHINE DIMENSIONS• LxWxH – 80" x 57" x 95" (203cm x 145cm x 241cm)
SAFETY• Meets ISO safety decal standards
• Safety chains
• 12 volt tail lights standard
• Meets NATM Certification
PARTS & ACCESSORIES• Blade Kit (P/N: 72493)
• Tach/Hour Meter Kit - Gas (P/N: 31605-00)
18 www.bearcatproducts.com
CHIPPERS6" (15cm) CAPACITY CANTILEVER CHIPPERS - 1 of 2
Models: CH611DH & CH6730H
ENGINESCH611DH
• Kubota 1.1 Liter Diesel, 69 cu in. (1.1 liter)
• Max torque: 54.2 ft-lbs. achieved at 2,200 rpm
• Operates at 3,220 rpm
CH6730H• Kohler 730cc
• Max torque: 40.9 ft-lbs. achieved at 2,400 rpm
• Operates at 3,750 rpm
FUEL CAPACITY/CONSUMPTION• 9 gal. (34.1 liters)
• Fuel consumption on the Kohler 730cc is estimated at 2.1 gal. (8 liters) per hour at full load
• Fuel consumption on the Kubota 1.1 L is estimated at 1.7 gal. (6.44 liters) per hour at full load
26" (66cm) DIAMETER ROTOR• 26" (66cm) diameter by 1" (2.5cm) thick rotor
• Weighs 165 lbs. (75kg)
• Machine balanced
• Rotates at 1,780 rpm (CH611DH)
• Rotates at 1,650 rpm (CH6730H)
• 1.75" (4.45cm) diameter rotor shaft
• Easily accessible through the hinged cover, when open it exposes one half of the rotor for easy access to the chipping blades and makes for easy clean out
FOUR CHIPPING BLADES• Four reversible heat-treated steel chipper blades
• Blade Dimensions: 5" x 4" x .5" (12.7cm x 10.2cm x 1.3cm)
BEARINGS• Two 1.75" (4.5cm) greasable bearings with four bolt cast
flanges
BELT DRIVE• Triple-banded belt drive with manual belt engagement
• Spring-loaded belt tensioner
ANVIL/CUTTER BAR• Four-sided adjustable anvil to insure good chipping ability
• 6" long x 4" wide x .625" thick (16.5cm x 10.2cm x 1.6cm)
HYDRAULIC FEED SYSTEM• Steel hydraulic reservoir, 4 gal. (15 liters) capacity on
CH611DH and a Nylon hydraulic reservoir, 3 gal. (11.5 liters) capacity on the CH6730H
• Self-contained hydraulic feed system allows you to evenly feed limbs into the chipper
• Variable feed rate on the CH611DH (available as an accessory on the CH6730H) with load sensing 2-stage pump
• Feed rate 0-150 fpm (0-46 m/min) Average 100 fpm (30 m/min)
• Self-contained system with infinite speed settings, dedicated neutral and full reverse, pump output 6.6 GPM (25 LPM) and 4hp with maximum pressure and maximum flow, however this is rarely required
• Feed system operates under 2,500 psi
• Single 15" (38cm) diameter top feed roller
• 2-stage pump
PLUS+1® ELECTRONIC CONTROLLER• Smart feed with automatic “try again” feature to clear jams
• Maximizes chipping efficiency and manpower
• Minimizes fuel consumption
• Provides an Amber code that alerts the operator every 15 hours to inspect chipping blades
FEED CHUTE• Opening 33" x 37" (84cm x 94cm) tray 30"
(76.2cm) off the ground
• Feed throat opening is 6.5" x 13" (16.5cm x 33cm)
• 90° feed angle
• Maximum feed size of up to 6" (15.2cm)
INTEGRATED DISCHARGECH6730H
• With a 360° rotatable, 6" (15.2cm) diameter steel tubing with adjustable spout cap
• Discharge height is 104" (2.6m)
CH611DH
• With a 360° rotatable, 6.7" (17cm) square steel chute with screw-type adjustable spout cap
• Discharge height is 93" (2.4m)
19888.625.4520
CHIPPERS
HEAVY-DUTY CONSTRUCTION• .25" (6.35cm) housing with welded construction
• Feed table is 10 gauge steel on the CH6730H and 7 gauge steel on the CH611DH
• Tongue is 3" x 3" (7.6cm x 7.6 cm) with 11 gauge wall thickness
HIGHWAY TOWABLECH6730H
• 50" (127cm) tread width (center to center) and P205-75R14 tires with 1,800 lb (816kg) torsion axle suspension
CH611DH
• 50" (127cm) tread width (center to center) and P215-75R15 tires with 2,500 lb. (1030kg) torsion axle suspension
TOWING WEIGHT• CH611DH – 2,300 lbs. (1,043kg)
• CH6730H – 1,635 lbs. (742kg)
HITCH• 2" (5cm) ball coupler is standard
• Height adjustable coupler has 3 positions in 2" (5cm) increments (CH611DH)
• CH611DH has a telescoping tongue length may be adjusted up to 18" (45cm)
ADJUSTABLE TONGUE JACK• Roller wheel with 850 lbs. (385kg) rating
• Adjustable jack allows one person to easily maneuver the chipper around and hook up to a vehicle
MACHINE DIMENSIONSCH611DH• LxWxH – 143" x 59" x 93" (363cm x 150cm x 236cm)
CH6730H• LxWxH – 126" x 57" x 104" (320cm x 145cm x 264cm)
SAFETY• Meets ISO safety decal standards
• Safety chains
• 12 volt tail lights standard
• Meets NATM Certification
PARTS & ACCESSORIES• Blade Kit (P/N: 76293-00)
• 2 5/16" Coupler (P/N: 14519-00)
• Pintle Hitch (P/N: 14900-00)
• Spare Tire Kit (CH611DH)(P/N: 75291-00)
• Tach/Hour Meter Kit - Gas (P/N: 31605-00)
• Knee Bar (P/N: 76945-00)
• Adjustable Feed Speed Sensor Kit (P/N: 76820-00)
6" (15cm) CAPACITY CANTILEVER CHIPPERS - 2 of 2
Models: CH611DH & CH6730H
Cantilever-Mounted Rotor on Select Models
20 www.bearcatproducts.com
CHIPPERS
ENGINESCH8720iH
• EFI Subaru EH 720cc, Fuel injected
• Max torque: 38.5 ft-lbs at 2,800 rpm
• Operates at 3,600 rpm
CH8993H
• Briggs & Stratton Vanguard 993cc
• Max torque: 52.4 ft-lbs at 2,350 rpm
• Operates at 3,750 rpm
FUEL CAPACITY/CONSUMPTION• 9 gal (34.1 liters)
• Fuel consumption on the Briggs & Stratton 993cc is estimated at 3 gal. (11.3 liters) per hour at full load
• Fuel consumption on the EFI Subaru EH 720cc is estimated at 1.5 gal (5.7 liters) per hour at full load
30" (76cm) DIAMETER ROTOR• 30" (76cm) diameter by 1.25" (3.2cm) thick rotor
• Weighs 275 lbs. (125kg)
• Machine balanced
• Rotates at 1,500 rpm
• 1.75" (4.45cm) diameter rotor shaft
• Easily accessible through the hinged cover, when open it exposes one half of the rotor for easy access to the chipping blades and makes for easy clean out
FOUR CHIPPING BLADES • Four reversible heat-treated steel chipper blades
• Blade Dimensions: 5" x 4" x .5" (12.7cm x 10.2cm x 1.3cm)
BEARINGS• Two 1.75" (4.5cm) greasable bearings with 4 bolt cast
flanges
BELT DRIVE• Triple-banded belt drive with manual belt engagement
• Spring-loaded belt tensioner
ANVIL/CUTTER BAR• Four-sided adjustable to insure good chipping ability
• 9" long x 4" wide x .625" thick (22.9cm x 8.9cm x 1.6cm)
HYDRAULIC FEED SYSTEM• Steel hydraulic reservoir, 3 gal. (11.5 liters) capacity
• Self-contained hydraulic feed system allows you to evenly feed limbs into the chipper
• Variable feed rate with load sensing 2-stage pump
• Feed rate 0-150 fpm (0-46 m/min) Average 100 fpm (30 m/min)
• Self-contained system with infinite speed settings, dedicated neutral and full reverse, pump output 6.6 GPM (25 LPM) and 4hp with maximum pressure and maximum flow, however this is rarely required
• Feed system operates under 2,500 psi
• Single 15" (38cm) diameter top feed roller
• 2-stage pump
8" (20cm) CAPACITY TURNTABLE CHIPPERS - 1 of 2
Models: CH8720iH & CH8993H
New Formed Rotor Paddles
21888.625.4520
CHIPPERS
PLUS+1® ELECTRONIC CONTROLLER• Smart feed with automatic “try again” feature to clear jams
• Maximizes chipping efficiency and manpower
• Minimizes fuel consumption
• Provides an Amber code that alerts the operator every 15 hours to change chipping blades
FEED CHUTE• Opening 30" x 31" (76cm x 79cm)
Tray 27" (68cm) off the ground
• Feed throat opening is 9" x 9" (23cm x 23cm)
• 90° Feed Angle
• Maximum feed size of up to 8" (23cm)
INTEGRATED DISCHARGE• With a 360° rotatable, 8" (20cm) diameter steel
tubing with adjustable spout cap allows you to put the chips where you want them the first time
• Discharge height is 95" (2.41m)
HEAVY-DUTY CONSTRUCTION• .375" (.95cm) steel face plate on the rotor housing
• .25" (6.35cm) steel on the rest of the housing
• Frame is 2.5" x 2.5" (5cm x 5cm) 7 gauge steel tubing
• Feed table is 10 gauge steel
• Tongue is 3" x 3" (7.6cm x 7.6cm) with .25" (6.35mm) wall thickness
HIGHWAY TOWABLE• 69" (174cm) tread width (center to center) and
P215-75R15 tires with 3,000 lb (1360kg) torsion axle suspension enables the chipper to be easily towed down the highway
TOWING WEIGHT• CH8720iH – 2,225 lbs. (1,009kg)
• CH8993H – 2,350 lbs. (1,066kg)
HITCH• 2" (5cm) ball coupler is standard
• Height adjustable coupler. Has 3 positions in 2" (5cm) increments
TELESCOPING TONGUE• Adjustable length and height. The length may be
adjusted up to 18" (45cm)
ADJUSTABLE TONGUE JACK• Roller wheel with 850 lb. (385kg) rating
• Adjustable jack allows one person to easily maneuver the chipper around and hook up to a vehicle
MACHINE DIMENSIONS• LxWxH – 136" x 79" x 95" (345cm x 200cm x 241cm)
360° ROTATIONAL BED• Bed can rotate 360° for ease of feeding from any direction
• Brake for locking bed in place. With drop pin for positive transport lock
• Keeps work crews out of the street
SAFETY• Meets ISO safety decal standards
• Safety chains
• 12 volt tail lights standard
• Meets NATM Certification
PARTS & ACCESSORIES• Blade Kit (P/N: 76293-00)
• 2 5/16" Coupler (P/N: 14519-00)
• Pintle Hitch (P/N: 14900-00)
• Low Profile Discharge Chute Kit (P/N: 74581-00)
• Knee Bar Safety Kit (P/N: 76195-00)
• Tach/Hour Meter Kit - Gas (P/N: 31605-00)
8" (20cm) CAPACITY TURNTABLE CHIPPERS 2 of 2
Models: CH8720iH & CH8993H
22 www.bearcatproducts.com
CHIPPERS9" (23cm) CAPACITY - 1 of 2
Models: CH911DH & CH922DH
ENGINESCH911DH
• Kubota engine 1.1 Liter Diesel, 69 cu in. (1.1 liter)
• Max torque: 54.2 ft-lbs. achieved at 2,200 rpm
• Operates at 3,220 rpm
CH922DH
• Kubota engine 2.2 Liter Diesel 134 cu in. (2.2 liter)
• Max torque: 108.4 ft-lbs. achieved at 1,800 rpm
• Operates at 3,020 rpm
FUEL CAPACITY/CONSUMPTION• 18 gal (68 liters)
• Fuel consumption on the 1.1 Liter Diesel Kubota is estimated at 1.7 gal. (7.57 liters) per hour at full load
• Fuel consumption on the 2.2 Liter Diesel Kubota is estimated at 3 gal. (14.2 liters) per hour at full load
30" (76cm) DIAMETER ROTOR• 30" (76cm) diameter by 1.25" (3.2cm) thick rotor
• Weighs 275 lbs. (125kg)
• Machine balanced
• Rotates at 1,600 rpm
• 1.75" (4.45cm) diameter rotor shaft
• Easily accessible through the hinged cover, when open it exposes one half of the rotor for easy access to the chipping blades and makes for easy clean out
FOUR CHIPPING BLADES• Four reversible heat-treated steel chipper blades
• Blade Dimensions: 5" x 4" x .5" (12.7cm x 10.2cm x 1.3cm)
BEARINGS• Two 1.75" (4.5cm) greasable bearings with four bolt
cast flanges
BELT DRIVE• Triple-banded belt drive with manual belt engagement
• Spring-loaded belt tensioner
ANVIL/CUTTER BAR• Four-sided adjustable to insure good chipping ability
• 9" long x 4" wide x .625" thick (22.9cm x 10.1cm x 1.6cm)
HYDRAULIC FEED SYSTEM• Steel hydraulic reservoir, 3 gal. (11.5 liters) capacity
• Self-contained hydraulic feed system allows you to evenly feed limbs into the chipper
• Variable feed rate with load sensing 2-stage pump
• Feed rate 0-150 fpm (0-46 m/min) Average 100 fpm (30 m/min)
• Self-contained system with infinite speed settings, dedi-cated neutral and full reverse, pump output 6.6 GPM (25 LPM) and 4 hp with maximum pressure and maximum flow, however this is rarely required
• Feed system operates under 2,500 psi
• Single 15" (38cm) diameter top feed roller
• 2-stage pump
PLUS+1® ELECTRONIC CONTROLLER• Smart feed with automatic “try again” feature to clear jams
• Maximizes chipping efficiency and manpower
• Minimizes fuel consumption
• Provides an Amber code that alerts the operator every 15 hours to change chipping blades
FEED CHUTE• Opening 30" x 31" (76cm x 79cm)
Tray 27" (68cm) off the ground
• Feed throat opening is 9" x 9" (23cm x 23cm)
• 90° Feed Angle
• Feed table is 38" (96.5cm) long
• Maximum feed size of up to 9" (23cm)
INTEGRATED DISCHARGE• With a 360° rotatable, 8" (20cm) diameter steel tubing
with adjustable spout cap allows you to put the chips where you want them the first time
• Discharge height is 96" (2.4m)
HEAVY-DUTY CONSTRUCTION• .375" (.95cm) steel face plate on the rotor
housing
• .25" (6.35mm) steel on the rest of the housing
• 4" (10cm) "C" Channel frame construction
HIGHWAY TOWABLE• 69" (175cm) tread width (center to center) and
P215-75R15 tires with 3000 lb (1360kg) torsion axle suspension enables the chipper to be easily towed down the highway
23888.625.4520
CHIPPERS9" (23cm) CAPACITY - 2 of 2
Models: CH911DH & CH922DH
TOWING WEIGHT • CH911DH – 2,480 lbs. (1,125kg)
• CH922DH – 2,700 lbs. (1,225kg)
TELESCOPING TONGUE• Pintle hitch is standard with 2" (5cm) ball coupler
available as an accessory
• Adjustable length and height. The length may be adjusted up to 18" (45cm) with four pin settings on the pintle hitch
ADJUSTABLE TONGUE JACK• Roller wheel with 850 lbs. (385kg) rating
• Adjustable jack allows one person to easily maneuver the chipper around and hook up to a vehicle
MACHINE DIMENSIONS• LxWxH – 119" x 79" x 96" (302cm x 200cm x 244cm)
SAFETY• Meets ISO safety decal standards
• Safety chains
• 12 volt tail lights standard
• Meets NATM Certification
PARTS & ACCESSORIES• Blade Kit (P/N: 76293-00)
• Electric Brake Kit (P/N: 72730)
• 2" (5cm) Coupler 10,000 lbs. (P/N: 77232-00)
• 2 5/16" (5.9cm) Coupler (P/N: 14519-00)
• Low Profile Discharge Chute Kit (P/N: 74581-00)
• Fine Chip Rotor Kit (P/N: 76775-00)
• Knee Bar Safety Kit (P/N: 76195-00)
• Hour Meter Kit - Diesel (P/N: 71921)
24 www.bearcatproducts.com
PTO MACHINES
PTO DRIVE• 540 rpm input
• Recommend 25-45 hp (19-34kW) at the PTO
CHIPPER/SHREDDER ROTOR ASSEMBLY• Weighs 112 lbs. (22.2kg)
• Machine balanced
• Rotates at 2,000 rpm
• 1.5" (3.8cm) diameter rotor shaft
• 19" diameter
CHIPPER BLADES & SHREDDING KNIVES• Four reversible heat-treated chipper steel blades
• Blade Dimensions: 3.125" x 2" x .25" (7.9cm x 5cm x .64cm)
• 36 Reversible Shredding Knives
BEARINGS• Two 1.5" (3.8cm) greasable bearings with two bolt cast
flanges
BELT DRIVE• Two single-banded belts
FEED CHUTES• Shredder hopper is 20" x 30" (50.8cm x 76.2cm)
• Maximum shredder capacity up to .75" (2cm)
• Maximum chipper feed size of up to 5" (12.7cm)
HEAVY-DUTY CONSTRUCTION• 7 gauge steel chipper/shredder housing
• .75" (1.9cm) steel flywheel
• Discharge screen is .25" (6.35mm) steel
MACHINE DIMENSIONS• LxWxH – 44" x 43" x 48" (111cm x 109cm x 122cm)
• Weight: 450 lbs. (204.1 kg)
SAFETY• Meets ISO safety decal standards
PARTS & ACCESSORIES• Double-Edge Blade Kit (P/N: 72493)
• Shredder Knives Kit (P/N: 70972)
• Vacuum Hose Kit (P/N: 71125) (requires P/N: 71110)
• Two-Speed Blower (P/N: 71110)
• Single-Speed Blower (P/N: 70487)
• Screen, Fine – .375" (.95cm) (P/N: 70703)
• Screen, Medium – .75" (2cm) (P/N: 70531)
• Screen, Standard – 1.5" (3.8cm) (P/N: 70332)
• Screen, Wet Debris (P/N: 70559)
5" (13cm) CAPACITY CHIPPER/SHREDDERModel: SC5540
25888.625.4520
PTO MACHINES
POWER SOURCE• 540 rpm input
• Recommend 25-45 hp (19-34kW) at the PTO
CHIPPER/SHREDDER ROTOR ASSEMBLY• Weighs 145 lbs. (65.8kg)
• Machine balanced
• Rotates at 2,000 rpm
• 1.5" (3.8cm) diameter rotor shaft
• Easily accessible through the hinged cover, when open it exposes one half of the rotor for easy access to the chipping blades and makes for easy clean out
• 20.6" (52.3cm) diameter
CHIPPER BLADES & SHREDDING KNIVES• Four reversible heat-treated chipper steel blades
• Blade Dimensions: 3.125" x 2" x .25" (7.9cm x 5cm x .64cm)
• 36 Reversible Shredding Knives
BEARINGS• Two 1.5" (3.8cm) greasable bearings with two bolt cast
flanges
BELT DRIVE• Double-banded belt drive
FEED CHUTES• Shredder hopper is 13" x 20" (33cm x 51cm)
• Maximum shredder capacity of up to .75" (2cm)
• Maximum chipper feed size of up to 5" (12.7cm)
INTEGRATED DISCHARGE • With a 360° rotatable, 6" (15.25cm) diameter steel
tubing with adjustable discharge
• Discharge height is 87" (221cm)
UNIQUE SCREENLESS SHREDDER• Unique product, self-feed chipper/shredder without a
screen
HEAVY-DUTY CONSTRUCTION• 7 gauge reinforced steel bed
MACHINE DIMENSIONS• LxWxH – 49" x 50" x 87" (124cm x 127cm x 221cm)
• Weight: 720 lbs. (326kg)
SAFETY• Meets ISO safety decal standards
PARTS & ACCESSORIES• Chipper Blade Kit (P/N: 72493)
• Shredder Knives Kit (P/N: 70972)
5" (13cm) CAPACITY CHIPPER/SHREDDER/BLOWERModel: SC5540B
CHIPPER/SHREDDER/
BLOWER
26 www.bearcatproducts.com
PTO MACHINES
PTO DRIVE• 540 rpm input
• Recommend 15-28 hp (11-21kW) at the PTO
14" (35.6cm) DIAMETER ROTOR• 14" (35.6cm) diameter by 1" (2.5cm) thick rotor
• Weighs 49 lbs. (22.2kg)
• Machine balanced
• Rotates at 2,000 rpm
• 1.25" (3.2cm) diameter rotor shaft
CHIPPER BLADES• Two reversible heat-treated steel chipper blades
• Blade Dimensions: 5" x 4" x .5" (12.7cm x 10.2cm x 1.3cm)
BEARINGS• Two 1.25" (3.2cm) greasable bearings with two bolt cast
flanges
BELT DRIVE• Double-banded belt drive
• Spring-loaded belt tensioner
ANVIL/CUTTER BAR• Four-sided adjustable to insure good chipping ability
• 5.6" long x 4" wide x .375" thick (14.2cm x 10.2cm x .95cm)
FEED CHUTE• Opening 13" x 14.5" (33cm x 36.8cm), 39" (99cm)
off the ground
• Feed throat opening is 4.5" x 5" (11.4cm x 12.7cm)
• Maximum feed size of up to 4.5" (11.4cm)
INTEGRATED DISCHARGE• Standard discharge is 4.5" x 4.5" (11.4cm x 11.4cm)
and discharges towards the ground, from a height of 14.9" (38cm)
• Optional Discharge is 4.5" x 4.5" (11.4cm x 11.4cm) discharges with adjustable deflector at a height of 55" (140cm)
HEAVY-DUTY CONSTRUCTION• 7 gauge steel throughout housing with welded
construction
3-POINT HITCH• Category 1
• Chipper weight is 361 lbs. (164kg)
MACHINE DIMENSIONS• LxWxH – 40" x 41" x 44" (102cm x 104cm x 112cm)
SAFETY• Meets ISO safety decal standards
PARTS & ACCESSORIES• Blade Kit (P/N: 76295-00)
• Optional Discharge Chute 4.5" x 4.5" (11.4cm x 11.4cm)(P/N: 74634-00)
4.5" (11cm) CAPACITY CANTILEVER CHIPPERModel: CH45540
27888.625.4520
PTO MACHINES
PTO DRIVE• 540 rpm input
• Recommend 25-45 hp (19-34kW) at the PTO
20" (51cm) DIAMETER ROTOR• 20" (51cm) diameter by 1.25" (3.2cm) thick rotor
• Weighs 140 lbs. (63.5kg)
• Machine balanced
• Rotates at 1,615 rpm (CH5540)
• Rotates at 1,630 rpm (CH5540H)
• 1.5" (3.8cm)-diameter rotor shaft
• Easily accessible through the hinged cover, when open it exposes one half of the rotor for easy access to the chipping blades and makes for easy clean out
CHIPPER BLADES• Four reversible heat-treated steel chipper blades
• Blade Dimensions: 3.1" x 2" x .25" (7.9cm x 5cm x .64cm)
BEARINGS• Two 1.5" (3.8cm) greasable bearings with two bolt cast
flanges.
BELT DRIVE• Double-banded belt drive
• Spring-loaded belt tensioner
ANVIL/CUTTER BAR• Four-sided adjustable anvil to insure good chipping ability
• 5.6" long x 4" wide x .375" thick (14.2cm x 10.2cm x .95cm)
HYDRAULIC FEED SYSTEM (CH5540H)• Single 15" (38cm) diameter top feed roller
• Maximum capacity of 3 gal. (11.36 LPM) at 2,500 psi
• Electric/Hydraulic System to control feed roller direction
• 2-stage hydraulic pump
FEED CHUTE• Opening 28" x 28" (71cm x 71cm)
• Feed throat opening is 5.5" x 7.5" (14cm x 19cm)
• Maximum feed size of 5" (13cm)
INTEGRATED DISCHARGE• With a 360° rotatable, 6" (15.25cm) diameter steel
tubing with adjustable spout cap allows you to put the chips where you want them the first time
• Discharge height is 90" (230cm)
HEAVY-DUTY CONSTRUCTION• .25" (6.35mm) steel throughout housing with welded con-
struction
CATEGORY 1 3-POINT HITCH• CH5540 - Weight is 600 lbs. (272kg)
• CH5540H - Weight is 980 lbs. (445kg)
MACHINE DIMENSIONS• CH5540 – LxWxH 50" x 45" x 90"
(127cm x 114cm x 229cm)
• CH5540H – LxWxH 68" x 49" x 90" (173cm x 124cm x 229cm)
SAFETY• Meets ISO safety decal standards
PARTS & ACCESSORIES • Blade Kit (P/N: 72493)
• Auto Feed Kit - CH5540H (P/N: 73071)
5" (13cm) CAPACITYModels: CH5540 & CH5540H
28 www.bearcatproducts.com
PTO MACHINES
PTO DRIVE• 540 rpm input
• Recommend 35hp to 60hp (26kW-45kW) at the PTO
30" (76cm) DIAMETER ROTOR• 30" (76cm) diameter by 1.25" (3.2cm) thick rotor
• Weighs 275 lbs. (125kg)
• Machine balanced
• Rotates at 1,500 rpm
• 1.75" (4.5cm)-diameter rotor shaft
• Easily accessible through the hinged cover, when opened, it exposes one half of the rotor for easy access to the chip-ping blades and makes for easy clean out
CHIPPER BLADES• Four reversible heat-treated steel chipper blades
• Blade Dimensions: 5" x 4" x .5" (12.7cm x 10.2cm x 1.3cm)
BEARINGS• Two 1.75" (4.5cm) greasable bearings with 4 bolt cast
flanges
BELT DRIVE• Triple-banded belt drive
ANVIL/CUTTER BAR• Four-sided adjustable anvil
• 9" long x 4" wide x .625" thick (22.9cm x 10.2cm x 1.6cm)
FEED CHUTE• Opening 30" x 31" (76cm x 79cm)
46.5" (118cm) off the ground
• Feed throat opening is 9" x 9" (23cm x 23cm)
• Maximum feed size of up to 8" (23cm)
INTEGRATED DISCHARGE• With a 360° rotatable, 8" (20cm) diameter steel tubing
with adjustable spout cap allows you to put the chips where you want them the first time
• Discharge height is 93" (236cm)
HEAVY-DUTY CONSTRUCTION• .375" (.95cm) steel face plate on the rotor housing
• .25" (6.35mm) steel on the wrap around with welded con-struction
• Frame is 2" x 2" (5cm x 5cm), 7 gauge steel
3-POINT HITCH• Category 1
MACHINE DIMENSIONS• LxWxH – 54" x 47" x 93" (137cm x 119cm x 236cm)
• Weight: 886 lbs. (402kg)
SAFETY• Meets ISO safety decal standards
PARTS & ACCESSORIES• Blade Kit (P/N: 76293-00)
• Low Profile Discharge Chute Kit (P/N: 74581-00)
8" (20cm) CAPACITYModel: CH8540
29888.625.4520
PTO MACHINES
PTO DRIVE• 540 rpm input
• Recommend 35hp to 60hp (26kW-45kW) at the PTO
30" (76CM) DIAMETER ROTOR• 30" (76cm) diameter by 1.25" (3.2cm) thick rotor
• Weighs 275 lbs. (125kg)
• Machine balanced
• Rotates at 1,500 rpm
• 1.75" (4.45cm) diameter rotor shaft
• Easily accessible through the hinged cover, when open it exposes one half of the rotor for easy access to the chipping blades and makes for easy clean out
CHIPPER BLADESCH9540H
• Four reversible heat-treated steel chipper blades
• Blade Dimensions: 5" x 4" x .5" (12.7cm x 10.2cm x 1.3cm)
CHF9540H
• 16 reversible heat-treated steel chipper blades
• Blade Dimensions: 3.1" x 2" x .25" (7.9cm x 5cm x .6cm)
• Blades are spaced on the rotor to provide maximum coverage and produce an extremely small chip
BEARINGS• Two 1.75" (4.5cm) greasable bearings with 4 bolt cast
flanges
BELT DRIVE• Triple-banded belt drive
ANVIL/CUTTER BAR• Four-sided adjustable anvil
• 9" long x 4" wide x .625" thick (22.9cm x 10.2cm x 1.6cm)
HYDRAULIC FEED SYSTEM• Steel hydraulic reservoir, 3 gal. (11.5 liter) capacity
• Self-contained hydraulic feed system allows you to evenly feed limbs into the chipper
• Variable feed rate with load sensing 2-stage pump
• Feed rate 0-150 fpm (0-46 m/min) Average 100 fpm (30 m/min)
• Self-contained system with infinite speed settings, dedi-cated neutral and full reverse, pump output 6.6 GPM (25 LPM) and 4Hp with maximum pressure and maximum flow, however this is rarely required
• Feed system operates under 2,500 psi
• Single 15" (38cm) diameter top feed roller
• 2-stage hydraulic pump
9" (23cm) CAPACITY 1 of 2
Models: CH9540H & CHF9540H
30 www.bearcatproducts.com
PTO MACHINES
PLUS+1® ELECTRONIC CONTROLLER• Smart feed with automatic “try again” feature to clear jams
• Maximizes chipping efficiency and manpower
• Minimizes fuel consumption
• Provides an Amber code that alerts the operator every 15 hours to inspect chipping blades
FEED CHUTE• Opening 30" x 31" (76cm x 79cm)
Tray 27" (68cm) off the ground
• Feed throat opening is 9" x 9" (23cm x 23cm)
• 90° feed angle
• Maximum feed size of up to 9" (23cm)
INTEGRATED DISCHARGECH9540H
• 360° rotatable, 8" (20cm) diameter steel tubing with adjustable spout cap discharges from a height of 93" (236cm)
CHF9540H
• 6" (15cm) diameter square discharge. Discharges toward the ground from a height of 34" (86cm)
HEAVY-DUTY CONSTRUCTION• .375" (.95cm) steel face plate on the rotor housing
• .25" (6.35mm) steel on the rest of the housing
• Frame is 2" x 2" (5cm x 5cm), 7 gauge steel
3-POINT HITCH• Category 1
• Chipper weight is 1,300 lbs. (590kg)
MACHINE DIMENSIONSCH9540H
• LxWxH – 70" x 50" x 93" (178cm x 127cm x 236cm)
CHF9540H
• LxWxH – 70" x 61" x 63" (178cm x 155cm x 160cm)
SAFETY• Meets ISO safety decal standards
PARTS & ACCESSORIES• Blade Kit for model CH9540H (P/N: 76293-00)
• Blade Kit for model CHF9540H (P/N: 74830-00)
• Low Profile Discharge Chute Kit (P/N: 74581-00)
• Fine Chip Rotor Kit (P/N: 76775-00)
9" (23cm) CAPACITY 2 of 2
Models: CH9540H & CHF9540H
31888.625.4520
SKID STEER CHIPPERS
SKID-STEER MOUNT• CH450H fits mini skid steer
(Minimum: 11 gpm - Maximum: 15 gpm)
• CH500H fits skid steers with standard (Minimum: 15 gpm - Maximum: 22 gpm)
• CH800H fits skid steers with high-flow hydraulics (Minimum: 25 gpm - Maximum: 38 gpm)
• CH500H and CH800H have two mounts, so chipper can be mounted with feed table facing forward or to the curbside
• Easy to attach just connect chipper to the SAE J2513 Quik-Tach, attach the hydraulic hoses, and you are ready to go
CHIPPER ROTORCH450H - Cantilever
• 14" (35.6cm) diameter by 1" (2.5cm) thick rotor• Weighs 49 lbs. (22.2kg)• Machine balanced• Rotates at 2,700 rpm at 11 gpm – 3,700 rpm at 15 gpm• 1.25" (3.2cm) diameter rotor shaft
CH500H
• 20" (51cm) diameter by 1.25" (3.2cm) thick rotor• Weighs 140 lbs. (63.5kg)• Machine balanced• Rotates at 2,700 rpm at 15 gpm – 4,000 rpm at 22 gpm• 1.5" (3.8cm) diameter rotor shaft
CH800H• 30" (76cm) diameter by 1.25" (3.2cm) thick rotor
• Weighs 275 lbs. (125kg)
• Machine balanced
• Rotates at 1,600 rpm at 25 gpm – 2,500 rpm at 38 gpm
• 1.75" (4.45cm) diameter rotor shaft
CHIPPING BLADES• Reversible heat-treated chipper steel blades• CH450H has two blades
• CH500H and CH800H have four blades• CH450 & CH800H - LxWxH – 5" x 4" x .5"
(12.7cm x 10.2cm x 1.3cm)
• CH500H - LxWxH – 3.125" x 2" x .25" (7.9cm x 5cm x .6cm)
BEARINGS• CH450H - Two 1.25" (3.2cm) greasable bearings
with two bolt cast flanges
• CH500H - Two 1.5" (3.8cm) greasable bearings with two bolt cast flanges
• CH800H - Two 1.75" (4.5cm) greasable bearings with four bolt cast flanges
ANVIL/CUTTER BAR• Four-sided adjustable anvil to insure good chipping ability
HYDRAULIC FEED (CH500H AND CH800H) • Four position manual valve control
(Reverse - Neutral - Forward - Reverse)
• Infinite speed settings with turn of a handle
FEED CHUTES CH450H• 4.5" x 4.5" (11.4cm x 11.4cm) chipper opening for side
limbs. Maximum feed size of 4.5" (11.4cm)
CH500H• 5.5" x 7" (14cm x 18cm) chipper opening for side
limbs. Maximum feed size of 5" (12.7cm)
CH800H• 9" x 9" (23cm x 23cm) chipper opening for side
limbs. Maximum feed size of 8" (20cm)
INTEGRATED DISCHARGE• The CH450H's standard discharge is 4.5" x 9" (11.4cm x
22.9cm) and discharges towards the ground, from a height of 10.5" (.27m)
• The CH500H and the CH800H have a 360° rotating, 6" (15cm) (CH500H) or 8" (20cm) (CH800H) diameter steel tubing with adjustable deflector cap thich allows you to put the chips where you want them the first time. These two models also discharge at a height of 93" (2.36m)
MACHINE DIMENSIONS & WEIGHTSCH450H• 41" x 28" x 40" (104cm x 71cm x 102cm)
359 lbs. (163kg)
CH500H• 73" x 53" x 93" (185cm x 135cm x 236cm)
1,145 lbs. (520kg)
CH800H• 74" x 60" x 88" (188cm x 152cm x 234cm)
1,525 lbs. (693kg)
SAFETY• Meets ISO safety decal standards
PARTS & ACCESSORIES• Optional Discharge Chute 4.5" x 4.5" (11.4cm x 11.4cm)
(P/N: 74634-00)
CH450H• Chipper Blade Kit (P/N 76295-00)
CH500H• Chipper Blade Kit (P/N: 72493)
CH800H (Serial #804670 & up)• Chipper Blade Kit (P/N: 76293-00)
4.5" (13cm) TO 8" (20cm) CAPACITYModels: CH450H, CH500H & CH800H
32 www.bearcatproducts.com
LOG SPLITTERS
ENGINES• LS22 – Subaru SP 170cc
• LS27 – Subaru SP 210cc
FUEL CAPACITY• LS22 – .95 gal. (3.6 liters)
• LS27 – .95 gal. (3.6 liters)
TONNAGE/FORCE• LS22 – up to 22 tons of splitting force
• LS27 – up to 27 tons of splitting force
CYLINDER• LS22 – 4" (10cm) diameter
• LS27 – 4.5" (11cm) diameter
OPERATING POSITIONS• Horizontal and vertical
CYCLE TIMES• LS22 – 12 Seconds
• LS27 – 14 Seconds
HYDRAULICS • LS22 – 4 gal. (15 liters) system
with a 2-stage 14 gpm (53 liters) pump
• LS27 – 4.5 gal. (17 liters) system with a two-stage 14 gpm pump
MAXIMUM LOG LENGTH• 24" (61cm)
CAST IRON WEDGE• Overall LxWxH – 6.25" x 8.25" x 8"
(16cm x 21cm x 20cm)
• Splitting surface LxWxH – 5" x 5.75" x 7.75" (12.7cm x 14.6cm x 19.7cm)
MACHINE DIMENSIONS & WEIGHTS• LxWxH – 84" x 39" x 40" (213cm x 99cm x 101cm)
• LS22 – 450 lbs. (204kg)
• LS27 – 455 lbs. (206.1kg)
BEAM• Wide end plate for greater stability in the vertical
position
• Bed Height - 30" (76cm) from ground
TRANSPORT• 4.8-8 (12cm x 20cm) wheels
• Weight distributed evenly
• 2" (5cm) Ball Coupler
• Lights and fenders are available as an accessory
• Maximum Tow Speed – 45 mph (72 Km/h)
SAFETY• Meets ISO safety decal standards
PARTS & ACCESSORIES• Log Splitter Valve Seal Kit (P/N: 77622-00)
• Log Splitter Cradle Kit (P/N: 77189-00)
• Quick Split Kit (P/N: 75896-00)
• Fenders & Tail Light Kit (P/N: 77510-00)
• Cast Wedge Kit (P/N: 77380-00)
• 4-Way Wedge Kit (P/N: 77514-00)
• Tach/Hour Meter Kit (P/N: 31605-00)
Models: LS22 & LS27
33888.625.4520
WHEELED TRIMMERS
ENGINE• Briggs & Stratton Quantum 190cc
FUEL CAPACITY• .25 gal. (.95 liter)
TRIMMER DISC PLATE DESIGN• Made of steel, not aluminum or plastic• Easy line replacement design
TRIMMER SHAFT & MOW BALL• .75" (1.9cm) steel trim head shaft • Heat-treated steel mow ball • Single belt driven cutting head• 2.25" collared anti-wrap collar design
ADJUSTABLE CUTTING HEIGHT• Trimmer disc can be reversed providing two different cut-
ting heights
TRIMMER LINE• .155 mil round line standard• .130 mil line optional• Ten 21" (52cm) pieces of round .155 mil included• .155 & .175 mil CrossFire line available
OFF-SET TRIM (WT190)• Body of trimmer can be pivoted to the left 13° or 4"
(10.2 cm) at the nose, to reach beyond the wheel base.
TILT (WT190T)• Three settings, 5°, 10° and 13°• Trim and edge along fences, barriers, foundations,
walls and other obstructions
BUILT TO LAST• 14 gauge steel frame & cutting head• Enclosed housing keeps debris out• 5/8" Solid steel axle
CUTTING SWATH• Cutting swath is 24" (61cm), while machine is only
21" (53cm) from the outer edges of tires
LARGE WHEELS• Large 15" (38.1cm) wheels with shielded ball bearings
ADJUSTABLE HANDLE BAR• Three settings for ergonomic operation
WEIGHT • WT190 - 77 lbs. (35kg) • WT190T - 77 lbs. (35kg) • WT190S - 82 lbs. (37.2kg)
SOUND LEVEL• The average dB rating at the operator is 92 dB pressure
and 99 dB power level.
SELF-PROPELLED• Model WT190S self-propelled with 3 speed transmission• Speeds for 3-speed transmission are 1 to 3 mph.
SAFETY• Meets ISO safety decal standards
FEATURES• Comes with .155 mil line. .130 mil line optional. .75" Steel
Trim Head Shaft and 5/8" Solid Steel Axle. Enclosed under-carriage to keep debris from getting in. Three different handle bar height settings for operator convenience. Powder baked paint handle bar and bail with foam grip. Much more uniform cut than a hand held trimmer.
• Mechanical “Off Center Trim" tilts head 18° and moves body over for straight trimming. This function allows for trimming along the edge and down to the base of a sidewalk. With re-spect to wood/vinyl fences, you can go along under the fence not marking it up and with chain link fence you can get under it without being as apt to break the trimmer line.
Models: WT190, WT190T & WT190S
Optional Wrapping Method 1
Optional Wrapping Method 2
Standard Wrapping Method
34 www.bearcatproducts.com
WHEELED TRIMMERSModels: WT190, WT190T & WT190S
ACCESSORIES
.155" diameter Round 10 Pack
20" pre-cut length, P/N: 32030-00
.130" diameter line
Round, 10 pk.P/N: 72777
Round, 1 lb. donutP/N: 12388
Square, 10 pk.P/N: 72778
Square, 1 lb. donutP/N: 12389
.155" diameter line
Round, 10 pk.P/N: 72780
Round, 1 lb. donutP/N: 12390
Square, 10 pk.P/N: 72779
Square, 1 lb. donutP/N: 12391
Nylon Blade KitP/N: 73060
14" Triple Blade Brush CutterFor extremely heavy/thick weeds
P/N: 32086-00
Proline HeadP/N: 74891-00
Heat-treated Mow Ball P/N: 72704-12
14" Sabre Tooth Blade Carbide tipped teeth for small trees & saplings up to 4" (10cm) in diameter
P/N: 74548-00
.155" diameter 10 Pack 20" pre-cut length, P/N: 32029-00
.175" diameter 10 pack 20" pre-cut length, P/N: 32031-00
35888.625.4520
STUMP GRINDER
ENGINE • Honda GXV 340cc
DOUBLE-BANDED BELT DRIVE SYSTEM• Double-banded belt driving the cutter head for more
positive power transfer. Belt tension idler
• Reduces belt maintenance greatly
CARBIDE TIPPED TEETH• 12 carbide tipped teeth offer maximum cutting
performance. These teeth are locked into the cutter head (8 curved, 4 straight teeth)
• The cutter head turns at 3,600 rpm with a speed at the tips 8,460 ft/min (2578 m/min)
• A screen covered opening increases visibility to the cutter head
7" (17.8cm) DIAMETER CUTTER HEAD• Large cutting diameter giving a smooth cut and can be
easily removed for quick and easy sharpening
• Cutter head at 15 degree angle
• Designed for use on stumps from 6" (15cm) above grade to a maximum of 4" (10cm) below grade
DEBRIS FLAP• Mounted to the stump grinder axle
LARGE ENCLOSED DRIVE SHAFT• Prevents chips from building up in the belts and pulleys
• Large 1.5" (3.8cm) diameter drive shaft provides superior reliability
16" (40.64cm) PNEUMATIC WHEELS• Pneumatic tires 4.80-8 rim with ball bearing hub
SINGLE WHEEL BRAKE• Allows the stump grinder to pivot and keep in position
while grinding effortlessly
ENGINE KILL SWITCH• Safety feature to shut engine off if disengaged for
added safety
MACHINE DIMENSIONS• LxWxH – 52" x 23" x 44" (132cm x 58cm x 112cm)
WEIGHT• 195 lbs. (88kg)
SAFETY• Meets ISO safety decal standards
PARTS• 12 Blade Cutter Replacement Kit (P/N: 76292-00)
Model: SG340
Single Wheel Brake 12 Blade Cutter Replacement KitP/N: 76292-00
36 www.bearcatproducts.com
WHEELED VACUUMS
ENGINES• WV160/WV160S – Honda 160cc GCV
• WV190/WV190S – Briggs & Stratton 190cc Professional Series
FAN ROTOR• 5-blade steel fan
• .25" (6.35mm) Steel welded rotor construction
ONE PIECE HOUSING• Made with .20" (.5cm) thick Linear Low Density
Polyurethane with a UV inhibitor
• Easily removable adapter with bag
• Discharge opening 6" x 6.5" (15cm x 16.27cm)
• Intake width 27" (68.58cm)
SELF-PROPELLED• Models WV160S and WV190S are 3 speed self-propelled
(1st – .71 mph (1.14 kph), 2nd – .93 mph (1.5 kph), 3rd – 1.21 mph (1.95 kph))
• Self-propelled rear wheel drive provides more traction
• Ball bearing wheels for a smoother, easier ride
HANDLEBARS• Four adjustable height settings
• Cushion Grip
BAG• Large capacity, hard bottom, quick dump bag,
5-bushel capacity
• Dust reducing
• Heavy-duty, double stitched nylon zipper with deflector flaps
• Adjustable hanger straps
ADJUSTABLE FRONT – FIVE HEIGHT SETTINGS• .25" (.64cm) above ground, ground level set at factory
• 1.25" (3.175cm)
• 2.375" (6.0325cm)
• 3.5" (8.89cm)
• 4.5" (14.43cm)
MACHINE DIMENSIONS• 61" x 27" x 46" (155cm x 69cm x 117cm)
at maximum handle height
• WV160 – 108 lbs. (49kg)
• WV190 – 113 lbs. (51kg)
• WV160S – 121 lbs. (55kg)
• WV190S – 126 lbs. (57kg)
SAFETY• Meets ISO safety decal standards
PARTS & ACCESSORIES• Additional Debris Bag (P/N: 31339-00)
• Caster Wheels (P/N: 76967-00)
• 4" Diameter Hose Kit (P/N: 73606-00)
• Durable Nozzle Wear Plate (P/N: 73640-00)
• Vacuum Wear Liner (P/N: 76466-00)
Models: WV160, WV160S, WV190 & WV190S
37888.625.4520 37888.625.4520
DEBRIS LOADERS
ENGINES• DL8390
Honda GX 390cc with recoil start
• DL10570 Briggs & Stratton Vanguard 570cc with recoil start
FUEL CAPACITY• DL8390 - 1.6 gal. (6 liters)
• DL10570 - 2.1 gal. (7.9 liters)
FAN AND HOUSING• Wear liners made out of high strength steel
• 4-blade fan made of .375" (.9cm) steel
• Scrolled fan housing for more efficient transfer of air
• Direct drive
• One bolt access cover removal for easy fan clean out
DISCHARGE CHUTE• 360° Rotational 8" (20.3cm) discharge chute
BUILT TO LAST• Heavy-duty hose swivel boom
• Light-weight aluminum handle
• 8" (20.3cm) diameter 12' (3.6m) long flex hose (model DL8390)
• 10" (25.4cm) diameter 12' (3.6m) long flex hose (model DL10570)
CFMS• DL8390 – 2300
• DL10570– 2500
MACHINE DIMENSIONSDL8390
• LxWxH – 35" x 25" x 58" (89cm x 64cm x 147cm)
DL10570
• LxWxH – 35" x 25" x 58" (89cm x 64cm x 147cm)
WEIGHTS DL8390
• 280 lbs. (127kg)
DL10570
• 280 lbs. (127kg)
SAFETY• Meets ISO safety decal standards
PARTS & ACCESSORIES• Wear Liner Replacement Kit (P/N: 75768-00)
• 4' (1.2 m) Flexible Horizontal Chute Extension (P/N: 74737-00)
• 16" Vertical Chute Extension (P/N: 75888-00)
• Swing Away Hitch Mount Kit (P/N: 75739-00)
• Tailgate Adapter Kit (P/N: 75753-00)
HITCH MOUNT DEBRIS LOADERSModels: DL8390, DL10570
38 www.bearcatproducts.com
DEBRIS LOADERS
ENGINESDL12653
• Subaru EH 653cc with electric start
DL12720
• Subaru EH 720cc with electric start
FUEL CAPACITY• 9 gal. (34.1 liters) polyethylene tank
FAN AND HOUSING• Wear liners made out of special high strength steel
• 4-blade fan made out of .375" (9.5mm) steel
• Scrolled fan housing for more efficient transfer of air
DRIVEDL12653• Direct drive
DL12720
• Double-banded belt drive with manual belt engagement
DISCHARGE CHUTE• 360° rotational 8" (20cm)
BUILT TO LAST• Heavy-duty swivel boom with hose storage
• 12" (30.5cm) diameter 12' (3.6m) long flex hose
• Lightweight aluminum handle
• One bolt access cover removal for easy fan clean out
MACHINE DIMENSIONSDL12653
• LxWxH – 30" x 50" x 86" (76cm x 127cm x 218cm)
DL12720
• LxWxH – 30" x 50" x 86" (76cm x 127cm x 218cm)
WEIGHTSDL12653
• 595 lbs. (269.9 kg)
DL12720
• 675 lbs. (306.2 kg)
CFMS• DL12653 – 3400
• DL12720 – 3400
SAFETY• Meets ISO safety decal standards
PARTS & ACCESSORIES• Flexible Hose 12" x 12' (30.5cm x 3.7m) (P/N: 12778)
• Wear Liner Replacement Kit (P/N: 77073-00)
• 16" (40.6 cm) Vertical Chute Extension (P/N: 75888-00)
• 4' (1.2 m) Flexible Horizontal Chute Extension (P/N: 74737-00)
• Universal Road Towable Trailer Kit (P/N: 77041-00)
• 12 Volt Work Light Kit (P/N: 77105-00)
SKID MOUNT DEBRIS LOADERSModel: DL12653, DL12720
Model shown with optional trailer.
39888.625.4520
ECHO BEAR CAT GEAR
SAFETY GLASSESLightweight and impact resistant. Hard-coated optical-grade, abrasion resistant lenses. Polycarbonate lenses offer 99.9% protection from the most intense UV rays.
Tech GlassesP/N: 36773-00
Zone II GlassesP/N: 36774-00
VIBRATION-REDUCING SPORT/LANDSCAPE GLOVES
Premium, padded-leather-palm gloves help reduce
vibration. Also feature form fitting fingers and Velcro®-type wrist band for tight fit.
P/N: 31299-00 (large)
P/N: 31300-00 (xlarge)
EAR MUFFS
These light-weight ear muffs have an NRR of 29 dB(A) when used as directed and meet
CE standard 3.19.
P/N: 36775-00
CE EN352-1:2002
Highly visible vest features 5-point tear away panels for safety.
P/N: 36777-00 (large)P/N: 36778-00 (xlarge)P/N: 36779-00 (xxlarge)
ISEA 107-2004
PREMIUM SAFETY VEST
REUSABLE VINYL EARPLUGS WITH CASE
The handy carrying case can be worn on your belt when not in use. Cleanup is easy with just warm
water. CE and OSHA approved.
P/N: 31539-00
HELMET SYSTEM
Includes helmet, mesh face visor and ear protection.
P/N: 36776-00
CE EN397:1995 CLASS EG & CCE EN1663B
CE EN352-3:1997
40 www.bearcatproducts.com
WARRANTY COVERAGECURRENT MODELS 1 of 2
U.S. and Canada – (Purchase made after Jan. 1, 2013)
PRODUCT ECHO BEAR CAT WARRANTY
CHIPPER/SHREDDER
MODEL ENGINE CONSUMER COMMERCIAL RENTAL PARTS LABOR
SC2170 Subaru 170cc
3 years
N/A N/A
YES YES
SC3206 Briggs & Stratton 205cc N/A N/A
SC3265 Subaru 265cc
1 year 6 months
SC3305 Briggs & Stratton 305cc
SC3305E Briggs & Stratton 305cc
SC3342 Briggs & Stratton 342cc
SC5540N/A
SC5540B
SC5720B Subaru 720cc
CHIPPERS
MODEL ENGINE CONSUMER COMMERCIAL RENTAL PARTS LABOR
CH4400 Subaru 404cc
3 years 1 year 6 months YES YES
CH45540
N/A
CH5540
CH5540H
CH500H
CH800H
CH5653 Subaru 653cc
CH611DH Kubota 1.1 L
CH6730H Kohler 730cc
CH8720iH Subaru 720cc
CH8993H Briggs & Stratton 993cc
CH8540
N/ACH9540H
CHF9540H
CH911DH Kubota 1.1 L
CH922DH Kubota 2.2 L
WHEELED TRIMMERS
MODEL ENGINE CONSUMER COMMERCIAL RENTAL PARTS LABOR
WT190
Briggs & Stratton 190cc 3 years 1 year 6 months YES YESWT190T
WT190S
41888.625.4520
WARRANTY COVERAGECURRENT MODELS 2 of 2
U.S. and Canada – (Purchase made after Jan. 1, 2013)
PRODUCT ECHO BEAR CAT WARRANTY
DEBRIS LOADERS
MODEL ENGINE CONSUMER COMMERCIAL RENTAL PARTS LABOR
DL8390 Honda 390cc
3 years 1 year 6 months YES YESDL10570 Briggs & Stratton 570cc
DL12653 Subaru 653cc
DL12720 Subaru 720cc
STUMP GRINDERS
MODEL ENGINE CONSUMER COMMERCIAL RENTAL PARTS LABOR
SG340 Honda 340cc 3 years 1 year 6 months YES YES
WHEELED VACUUMSMODEL ENGINE CONSUMER COMMERCIAL RENTAL PARTS LABOR
WV190Briggs & Stratton 190cc
3 years 1 year 6 months YES YESWV190S
WV160Honda 160cc
WV160S
LOG SPLITTERSMODEL ENGINE CONSUMER COMMERCIAL RENTAL PARTS LABOR
LS22 Subaru 170cc3 years 1 year 6 months YES YES
LS27 Subaru 210cc
3 YEAR WARRANTY: Valid on any ECHO Bear Cat product purchased after January 1, 2013. U.S. & Canada Only.
“Consumer” defined as: complete unit for residential or non-income producing use.“Commercial” defined as: complete unit for commercial, institutional, agricultural, horticultural or income producing use.“Rental” defined as: complete unit for rental purposes to produce income.
*Models SC2170, SC2206 & SC3206 are classified as Consumer grade products and will not qualify for warranty coverage if used for Commercial or Rental purposes.
ENGINE WARRANTY: For Engine Warranty information or service needs regarding the engine of your machine, record the serial number of the engine and refer to the Engine Owners Manual for terms and conditions of the manufacturer or see your nearest dealer.
42 www.bearcatproducts.com
WARRANTY COVERAGENON-CURRENT PRODUCTION 1 of 2
U.S. and Canada – (Non-current Production - Purchase made after Jan. 1, 2013)
PRODUCT ECHO BEAR CAT WARRANTY
CHIPPER/SHREDDERS
MODEL ENGINE CONSUMER COMMERCIAL RENTAL PARTS LABOR
SC2206 Briggs & Stratton 190cc
3 years
N/A N/A
YES YES
SC3240, SC3240T
Honda 240cc
1 year 6 monthsSC3270, SC3270T
Honda 270cc
SC5614 Honda 614cc
SC5670B Honda 670cc
CHIPPERS
MODEL ENGINE CONSUMER COMMERCIAL RENTAL PARTS LABOR
CH45342 Briggs & Stratton 342cc
3 years 1 year 6 months YES YES
CH45390 Honda 390cc
CH45540 N/A
CH4614 Honda 614cc
CH4540 N/A
CH6614, CH6614H
Honda 614cc
CH6670H Honda 670cc
CH6993H Briggs & Stratton 993cc
CH8670H Honda 670cc
CH123DH Kubota 3 L
WHEELED TRIMMERS
MODEL ENGINE CONSUMER COMMERCIAL RENTAL PARTS LABOR
WT160THonda 160cc
3 years 1 year 6 months YES YES
WT160S
WT24
Subaru 190ccWT24T
WT24S
WT190SE Briggs & Stratton 190cc Elec. Start
DEBRIS LOADERS
MODEL ENGINE CONSUMER COMMERCIAL RENTAL PARTS LABOR
DL12670 Honda 670cc3 years 1 year 6 months YES YES
DL12725 Kohler 725cc
43888.625.4520
WARRANTY COVERAGENON-CURRENT PRODUCTION 2 of 2
U.S. and Canada – (Non-current Production - Purchase made after Jan. 1, 2013)
3 YEAR WARRANTY: Valid on any ECHO Bear Cat product purchased after January 1, 2013. U.S. & Canada Only.
“Consumer” defined as: complete unit for residential or non-income producing use.“Commercial” defined as: complete unit for commercial, institutional, agricultural, horticultural or income producing use.“Rental” defined as: complete unit for rental purposes to produce income.
*Models SC2170, SC2206 & SC3206 are classified as Consumer grade products and will not qualify for warranty coverage if used for Commercial or Rental purposes.
ENGINE WARRANTY: For Engine Warranty information or service needs regarding the engine of your machine, record the serial number of the engine and refer to the Engine Owners Manual for terms and conditions of the manufacturer or see your nearest dealer.
PRODUCT ECHO BEAR CAT WARRANTY
WHEELED VACUUMSMODEL ENGINE CONSUMER COMMERCIAL RENTAL PARTS LABOR
WV179Kawasaki 179cc 3 years 1 year 6 months YES YES
WV179S
LOG SPLITTERSMODEL ENGINE CONSUMER COMMERCIAL RENTAL PARTS LABOR
LS21E 1.5 hp single phase electric
3 years
N/A N/A
YES YES
LS21 Subaru 190cc
1 year 6 months
LS21160, LS21160T
Honda 160cc
LS27270, LS27270T
Honda 270cc
LS33340, LS33340T
Honda 340cc
44 www.bearcatproducts.com
WARRANTY COVERAGE
PRODUCT ECHO BEAR CAT WARRANTY
CHIPPER/SHREDDER
MODEL ENGINE CONSUMER COMMERCIAL RENTAL PARTS LABOR
SC2170 Subaru 170cc
2 years
N/A N/A
YES YES
SC3206 Briggs & Stratton 205cc N/A N/A
SC3265 Subaru 265cc
1 year 6 months
SC3305 Briggs & Stratton 305cc
SC3305E Briggs & Stratton 305cc
SC3342 Briggs & Stratton 342cc
SC5540N/A
SC5540B
SC5720B Subaru 720cc
CHIPPERS
MODEL ENGINE CONSUMER COMMERCIAL RENTAL PARTS LABOR
CH4400 Subaru 404cc
2 years 1 year 6 months YES YES
CH45540
N/A
CH5540
CH5540H
CH500H
CH800H
CH5653 Subaru 653cc
CH611DH Kubota 1.1 L
CH6730H Kohler 730cc
CH8720iH Subaru 720cc
CH8993H Briggs & Stratton 993cc
CH8540
N/ACH9540H
CHF9540H
CH911DH Kubota 1.1 L
CH922DH Kubota 2.2 L
WHEELED TRIMMERS
MODEL ENGINE CONSUMER COMMERCIAL RENTAL PARTS LABOR
WT190
Briggs & Stratton 190cc 2 years 1 year 6 months YES YESWT190T
WT190S
CURRENT MODELS 1 of 2
All areas Outside the U.S. and Canada
45888.625.4520
WARRANTY COVERAGE
PRODUCT ECHO BEAR CAT WARRANTY
DEBRIS LOADERS
MODEL ENGINE CONSUMER COMMERCIAL RENTAL PARTS LABOR
DL8390 Honda 390cc
2 years 1 year 6 months YES YESDL10570 Briggs & Stratton 570cc
DL12653 Subaru 653cc
DL12720 Subaru 720cc
STUMP GRINDERS
MODEL ENGINE CONSUMER COMMERCIAL RENTAL PARTS LABOR
SG340 Honda 340cc 2 years 1 year 6 months YES YES
WHEELED VACUUMSMODEL ENGINE CONSUMER COMMERCIAL RENTAL PARTS LABOR
WV190Briggs & Stratton 190cc
2 years 1 year 6 months YES YESWV190S
WV160Honda 160cc
WV160S
LOG SPLITTERSMODEL ENGINE CONSUMER COMMERCIAL RENTAL PARTS LABOR
LS22 Subaru 170cc2 years 1 year 6 months YES YES
LS27 Subaru 210cc
NOTE:
“Consumer” defined as: complete unit for residential or non-income producing use.“Commercial” defined as: complete unit for commercial, institutional, agricultural, horticultural or income producing use.“Rental” defined as: complete unit for rental purposes to produce income.
*Models SC2170, SC2206 & SC3206 are classified as Consumer grade products and will not qualify for warranty coverage if used for Commercial or Rental purposes.
ENGINE WARRANTY: For Engine Warranty information or service needs regarding the engine of your machine, record the serial number of the engine and refer to the Engine Owners Manual for terms and conditions of the manufacturer or see your nearest dealer.
CURRENT MODELS 2 of 2
All areas Outside the U.S. and Canada
46 www.bearcatproducts.com
NON-CURRENT MODELS 1 of 2
All areas Outside the U.S. and Canada
WARRANTY COVERAGE
PRODUCT ECHO BEAR CAT WARRANTY
CHIPPER/SHREDDERS
MODEL ENGINE CONSUMER COMMERCIAL RENTAL PARTS LABOR
SC2206 Briggs & Stratton 190cc
2 years
N/A N/A
YES YES
SC3240, SC3240T
Honda 240cc
1 year 6 monthsSC3270, SC3270T
Honda 270cc
SC5614 Honda 614cc
SC5670B Honda 670cc
CHIPPERS
MODEL ENGINE CONSUMER COMMERCIAL RENTAL PARTS LABOR
CH45342 Briggs & Stratton 342cc
2 years 1 year 6 months YES YES
CH45390 Honda 390cc
CH45540 N/A
CH4614 Honda 614cc
CH4540 N/A
CH6614, CH6614H
Honda 614cc
CH6670H Honda 670cc
CH6993H Briggs & Stratton 993cc
CH8670H Honda 670cc
CH123DH Kubota 3 L
WHEELED TRIMMERS
MODEL ENGINE CONSUMER COMMERCIAL RENTAL PARTS LABOR
WT160THonda 160cc
2 years 1 year 6 months YES YES
WT160S
WT24
Subaru 190ccWT24T
WT24S
WT190SE Briggs & Stratton 190cc Elec. Start
DEBRIS LOADERS
MODEL ENGINE CONSUMER COMMERCIAL RENTAL PARTS LABOR
DL12670 Honda 670cc2 years 1 year 6 months YES YES
DL12725 Kohler 725cc
47888.625.4520
WARRANTY COVERAGENON-CURRENT MODELS 2 of 2
All areas Outside the U.S. and Canada
PRODUCT ECHO BEAR CAT WARRANTY
WHEELED VACUUMSMODEL ENGINE CONSUMER COMMERCIAL RENTAL PARTS LABOR
WV179Kawasaki 179cc 2 years 1 year 6 months YES YES
WV179S
LOG SPLITTERSMODEL ENGINE CONSUMER COMMERCIAL RENTAL PARTS LABOR
LS21E 1.5 hp single phase electric
2 years
N/A N/A
YES YES
LS21 Subaru 190cc
1 year 6 months
LS21160, LS21160T
Honda 160cc
LS27270, LS27270T
Honda 270cc
LS33340, LS33340T
Honda 340cc
NOTE:
“Consumer” defined as: complete unit for residential or non-income producing use.“Commercial” defined as: complete unit for commercial, institutional, agricultural, horticultural or income producing use.“Rental” defined as: complete unit for rental purposes to produce income.
*Models SC2170, SC2206 & SC3206 are classified as Consumer grade products and will not qualify for warranty coverage if used for Commercial or Rental purposes.
ENGINE WARRANTY: For Engine Warranty information or service needs regarding the engine of your machine, record the serial number of the engine and refer to the Engine Owners Manual for terms and conditions of the manufacturer or see your nearest dealer.
48 www.bearcatproducts.com
BELT REFERENCE GUIDEPart Number Description Models Area Used
12106 Belt, 3V670 Kevlar 72085, 72285, 72385 (SN =>21300), 75011, 75111 Beater Bar
12119 Belt, 2RB65 73525 Drive
12273 Belt, 3B90 Banded CH922DH (74950) Drive
12317 Belt, 4L 53 73040, 73050, 73450, 74040, 74450, 74455, 74050, 74060, 74065, 75065, 76065, WT160, WT160T, WT190, WT190T Drive
12365 Belt, 3VX530 73710, SG340 (73711) Drive
12573 Belt, 3L x 52 Kevlar 73150, 73350, 73265, 73455, 75365, WT160S, WT190S, WT190SE Drive
12660 Belt, 4L350 CH5540H (74554), 74624, 74520 Hyd Feed
16000 Belt, BX-65 70500 Drive
16043 Belt, 29” CH6730H, CH6670H (76624) & CH6993H (76635)(SN>603143), Pump
16043 Belt, 29” SC3206 (70050) (SN>105334), SC3342 (75311) (Single Belt Drive SN<C03478), SC3305 (70080), SC3270E (70085), SC3240 (78380), 70180 Drive
16081 Belt, 27” SC3206 (70050) (SN<105334) Drive
16086 Belt, BX-49 70487 Drive
16347 Belt, 2B70 Banded SC5614 (71020), 73413, 73420, 74520, 73120, 73125, 73725, 71014, DL12670 (75124), DL12720 Drive
16500 Belt, VGates 6958 71110, 71125 Drive
16559 Belt, 3B83 Banded CH8720iH, CH6614 (71620), CH6614H (72620), CH911DH (72928), CH8670H (76824), CH8993H (76835), 71825, 72825, 74824, Drive
16636 Belt, BX-43 CH9540H (72854), CHF9540H (76854) Hyd Feed
16660 Belt, BX-38 CH911DH (72928) & CH922DH (74950)(VIN<5VJAA00118W000989), CH6614 (72620), 72825, 74824, 72942, Hyd Feed
16691 Belt, 3VX500 71755 Drive
16787 Belt, 3B85 Banded 72942 Drive
16799 Belt, 2R3VX475 EL COG 71785 Drive
16911 Belt, 3V560 72085, 72285, 72385, 75011, 75111 Drive
16912 Belt, 3V600 72085, 72285, 72385 (SN<21300) Beater Bar
17055 Belt, BX-56 [Qty 2] SC5540B (73454), CH5540H (74554), CH5540, SC5540 (70554), 70520 Drive
17558 Belt, 4L-38 70251, 70252 Drive
17996 Belts, 29” (Matched set) SC3265, SC3240 (70380), SC3240T (70580), 70385, SC3342 (Dual Belt Drive SN=>C03478) Dual Belt Drive
13426-00 Belt, 2RBP56 SC5540B (73554) Drive
13884-00 Belt, SP BEARVAC (3L32) WV190S (75360) WV179S (77360), and WV160S (75350) Drive
13973-00 Belt, 2RB63 Banded SC5670B (75524) Drive
14261-00 Belt, 3RB48 Banded CH6730H, CH6993H (76635), CH611DH (76628), CH6670H (76624), 74628, 74624, Drive
14770-00 Belt, 2RB61 CH4400, CH45342 (77412), CH45390 (77413) Drive
14804-00 Belt, 5-5V750, Non Cog CH123DH (7812086) Drive
18093-00 Belt, 2RB47 [Qty 2] CH45540 (77454) Drive
18277-00 BX44 Belt CH8720iH, CH8670H (76824), CH8993H (76835) Hydraulic
18531-00 BX30 Belt CH911DH, CH922DH (VIN>5VJAA00178W001015) Hydraulic
18633-00 BX33 Belt CH611DH (76628) Hydraulic
31460-00 Belt, 2BRP67 CH5653 Drive
31498-00 Belt, 2RB40 SC5720B Drive
31995-00 Belt, 5L500 Wrapped Aramid WT24, WT24S, WT24T Head
32124-00 Belt, 4L180 WT24S Transmission
32252-00 Belt, 3RB64 CH8540 (71854), CH9540H (72854), CHF9540H (76854) Drive
49888.625.4520
ROTOR & CHIPPER/SHREDDER KITS
COMPLETE ROTOR REPLACEMENT ASSEMBLIES
Part Number Description Models
70062Replacement Rotor Assembly, 8 HP machines (SN 25659 and below) (Shredder kit not included)
SC3265, SC3305 (70080), SC3305E (70085), SC3240 (70380), SC3240T (70580), SC3270, SC3270T, SC3342 (75311), 70385, 70180
70277Replacement Rotor Assembly, 5 HP machines (SN 25659 and below) (Shredder kit not included)
SC3206 (70050)
70366Replacement Rotor Assembly, 5” Chipper/Shredders (SN 26377 and below) (Shredder kit not included)
SC5540 (70554), SC5540B (71020), 71014, 70500
73371-00 Replacement Rotor Assembly, 5” Chipper/Shredders SC5670B (75524), SC5540B (73554), 73525
74209-00Rotor Replacement Assembly, 3” Chipper/Shredders (Wide body models)
SC3265, SC3305 (70080), SC3305E (70085), SC3240 (70380), SC3240T (70580), SC3270, SC3270T, SC3342 (75311), 70385, 70180
75399-00 Rotor Replacement Assembly SC2206
77591-00 Rotor Replacement Assembly SC3206
77612-00 Rotor Replacement Assembly SC5720B
77615-00 Rotor Replacement Assembly SC2170
SHREDDER KNIVES REPLACEMENT KITS
All Kits contain knives, spacers, shafts, hardware and installation instructions
Part Number Description Models
70316 Kit, Shredder Knives 70530, 70515, 70525
70972 Kit, Shredder KnivesSC5540 (70554), SC5614 (71020), SC5670B (75524), SC5540B (73554), 73525, 71014, 70520
70973 Kit, Shredder Knives (Wide body 3” SC models)SC3265, SC3305 (70080), SC3305E (70085), SC3240 (70380), SC3240T (70580), SC3270, SC3270T, SC3342 (75311), 70385, 70180
71381 Kit, Shredder Knives (Narrow body 3” SC models) SC3206 (70050) - Serial # C03159 and below
75502-00 Kit, Shredder Knives SC2206
77589-00 Kit, Shredder Knives (Narrow body 3” SC models) SC3206 - Serial # C03478 and above
77613-00 Kit, Shredder Knives SC5720B
77616-00 Kit, Shredder KnivesSC2170
77618-00 Kit, Optional Additional Shredder Knives
50 www.bearcatproducts.com
BLADE KITS
KITS CONTAIN ALL NECESSARY BLADES AND HARDWARE 1 of 2
MODELS SN RANGE VIN RANGE KIT P/N DESCRIPTION
3" CHIPPER/SHREDDERS
70515, 70525, 70530 0 - Current 70317 Small Chipper Blade Kit
SC2170, SC2206, SC3206 (70050), SC3265, SC3305
(70080), SC3305E (70085), SC3270 (70380), SC3270T (70580), SC3342 (75311),
SC3240, 70385, 70030, 72085, 72285, 70180
0 - 25658* 70205 Single Edge Small Blade Kit
25659 - Current 5VJAA00137W000009 -Current 70738 Tool Steel Blade Kit
4" & 5" CHIPPERS
CH4400 0 - Current 76295-00 Chipper Blade Kit
CH5653, CH5540, CH4540 (73454), CH5540H (74554),
CH500H (74500), 734130 - Current
72493 Chipper Blade Kit
CH4614 (73420) 0 - 705078 5VJAA00197W000009 - Current
4.5" CHIPPERS
CH45342 (77412), CH45540 (77454), CH450H, CH45390
(77413)
0 - 902474 0 - 5VJAA00109W001849 74744-00 77412/13 Blade Kit
902475 - Current 5VJAA00109W001850 - Current 76295-00 4-1/2 Chipper Blade Kit
5" CHIPPER/SHREDDERS
SC5540 (70554), SC5614 (71020), SC5540B (73554), SC5670B
(75524), SC5720B, 70500, 70520, 71014, 74520, 73525
0 - 26376* 70453 Single EdgeBlade Kit
26377 - Current 5VJAA00137W000071 - Current 72493 Chipper Blade Kit
6" CHIPPERS
CH6730H, CH6670H (76624), CH611DH (76628), CH6993H
(76635), 74624, 74628
0 - 704809 0 - 5VJAA00159W001743 74220-00 6 Inch Blade Kit
5VJAA00159W001744 - Current 76293-00 Chipper Blade Kit
CH6614 (71620), CH6614H (72620) 0 - 705118 5VJAA00157W000010 - Current 71426 8 Inch Chipper
Blade Kit
51888.625.4520
BLADE KITS
KITS CONTAIN ALL NECESSARY BLADES AND HARDWARE 2 of 2
MODELS SN RANGE VIN RANGE KIT P/N DESCRIPTION
8" CHIPPERS
CH8720iH, CH8993H (76835), CH8670H (76824)
0 - 704960 0 - 5VJAA00119W001755 71426 8 Inch Chipper Blade Kit
5VJAA00119W001756 - Current76293-00 Chipper Blade Kit
74824, CH800H (74800)
904473 - Current
0 - 804669 71426 8 Inch Chipper Blade Kit
8" & 9" PTO CHIPPERS
CH8540 (71854), CH9540H (72854)
0 - 901387 71426 8 Inch Chipper Blade Kit
901388 - Current 76293-00 Chipper Blade Kit
CHF9540H (76854) 502304 - Current 74830-00 Blade Kit
9" CHIPPERS
CH911DH (72928), CH922DH (74950)
0 - 704696 0 - 5VJAA00109W001785 71426 8 Inch Chipper Blade Kit
5VJAA00109W001786 - Current 76293-00 Chipper Blade Kit
12" CHIPPERS
CH123DH (7812086) 500423 - Current 5VJAA00137W000023 - Current 73900-00 12" Blade Kit
STUMPGRINDERS
SG340 (73711), 71755, 71785, 73710 0 - 805549 71445 4 Blade Stump
Cutter Kit
SG340 810639 - Current
76292-00 12 Blade Cutter Replacement Kit73711 with 12-blade retrograde
fit kit, PN: 76256-00 0 - Current
SG340
0 - Current 76903-00
12 Blade Cutter Retro Fit Kit
(To change from 4 blade to 12 blade system)
0 - Current 76906-00
12 Blade Cutter Upgrade Kit
(To change from 6 bolt to 12 bolt system)
52 www.bearcatproducts.com
ACCESSORIES
Shredder Knives Kit P/N: 70972. Models: SC5540 & SC5540B.
Blades and Knives Kits
Blade Kit, P/N: 70738 Models: SC2170, SC3206, SC3265, SC3305
SC3305E & SC3342
Blade Kit, P/N: 76295-00 Models: CH4400, CH45540 & CH450H
Blade Kit, P/N: 72493 Models: SC5720B, SC5540, SC5540B, CH5653, CH5540H & CH5540
Blade Kit, P/N: 76293-00 Models: CH611DH, CH6730H, CH8720iH, CH8993H,
CH911DH, CH922DH, CH8540, CH9540H & CHF9540
Shredder Knives Kit P/N: 77616-00. Model: SC2170.
Additional Knives Kit, P/N: 77618-00
53888.625.4520
ACCESSORIES
Fine Screen
Medium Screen
Coarse Screen Standard
Wet Debris Screen
Shredder Knives Kit P/N: 77613-00. Model: SC5720B
Debris Bag, P/N: 17854 Models: Any models that discharge to the ground
Shredder Knives Kit P/N: 77589-00. Model: SC3206
Shredder Knives Kit, P/N: 70973 Models: SC3265, SC3305, SC3305E & SC3342
Blades and Knives Kits 3" SC Screens
SC2170 Screens
See model page for specific corresponding part numbers.
See model page for specific corresponding part numbers.
.75" FineWet
Debris1.13"
Standard
54 www.bearcatproducts.com
ACCESSORIES
Blower Kit with 2-Blade Radial Fan P/N: 70251, Models: SC3265, SC3305, SC3305E & SC3342
All Weather Cover, P/N: 70093 Models: All 3" Chipper/Shredders
Leaf Tamper, P/N: 70089 Models: All 3" Chipper/Shredders
Two Wheel Tow Kit, P/N: 77000-00Models: All 3" Chipper/Shredders
Road Towable Chipper/Shredder Trailer, P/N: 77353-00 Models: All 3" Chipper/Shredders
Pintle Hitch, P/N: 14900-00 Models: CH611DH, CH6730H, CH8720iH & CH8993H
Supplemental Adaptor Kit (For Models Serial C03477 & below)Wide Body ModelsP/N: 77700-00SC3206P/N: 77701-00
55888.625.4520
ACCESSORIES
4.5" x 4.5" (11.4cm x 11.4cm) Discharge Chute P/N: 74634-00. Models: CH4400, CH450H & CH45540
Adjustable Feed Speed Kit, P/N: 76820-00 Models: CH611DH & CH6730H
Low Profile Discharge, P/N: 74581-00 Models: CH8540, CH8720iH, CH8993H, CH911DH,
CH922DH, CH9540H & CHF9540H
Hour/Tach Kit - Gas, P/N: 31605-00 Models: All gasoline engine powered machines
Hour Meter Kit - Diesel, P/N: 71921 Models: CH911DH & CH922DH
12 Tooth Cutter Replacement Kit P/N: 76292-00. Model SG340
56 www.bearcatproducts.com
ACCESSORIES
Log Cradle P/N: 77189-00. Models: LS22 & LS27
Quick Split Kit P/N: 75896-00. Models: LS22 & LS27
Fenders & Tail Lights Kit P/N: 77510-00. Models: LS22 & LS27
4-Way Wedge P/N: 77514-00. Models: LS22 & LS27
57888.625.4520
ACCESSORIES
.155" diameter Round 10 Pack
20" pre-cut length, P/N: 32030-00
.130" diameter line
Round, 10 pk.P/N: 72777
Round, 1 lb. donutP/N: 12388
Square, 10 pk.P/N: 72778
Square, 1 lb. donutP/N: 12389
.155" diameter line
Round, 10 pk.P/N: 72780
Round, 1 lb. donutP/N: 12390
Square, 10 pk.P/N: 72779
Square, 1 lb. donutP/N: 12391
Nylon Blade KitP/N: 73060
14" Triple Blade Brush CutterP/N: 32086-00
Proline HeadP/N: 74891-00
Heat-treated Mow Ball P/N: 72704-12
14" Sabre Tooth Blade Saplings up to 4" (10cm) in diameter
P/N: 74548-00
.155" diameter 10 Pack 20" pre-cut length, P/N: 32029-00
.175" diameter 10 pack 20" pre-cut length, P/N: 32031-00
58 www.bearcatproducts.com
ACCESSORIES
Vacuum Hose Kit P/N: 73606-00. Models: WV190 & WV190S
Caster Wheel KitP/N: 76967-00. Models: All Wheeled Vacuums
Nozzle Wear PlateP/N: 73640-00. Models: All Wheeled Vacuums
Vacuum LinerP/N: 76466-00. Models: All Wheeled Vacuums
Debris Bag P/N: 31339-00. Models: WV190 & WV190S
Swing Away Hitch Mount KitP/N: 75739-00. Models: DL8390 & DL10570
Tailgate Adapter KitP/N: 75753-00. Models: DL8390 & DL10570
59888.625.4520
ACCESSORIES
Wear Liner Replacement Kit P/N: 75768-00. Models: DL8390 & DL10570
4' (1.2m) Flexible Chute Extension P/N: 74737-00. Models: All Debris Loaders
Debris Loader Light Kit P/N: 77105-00. Models: DL12653 & DL12720
16" (41cm) Vertical Chute Extension, P/N: 75888-00 Models DL8390, DL10570, DL12653 & DL12720
Wear Liner Replacement Kit P/N: 77073-00. Models: DL12653 & DL12720
To view a complete list of ECHO Bear Cat parts and
accessory options, please visit our website
www.bearcatproducts.com and click on
Options and Accessories under the Products tab.
www.bearcatproducts.com
P.O. Box 849 West Fargo, ND 58078-0849
Phone: 1.701.282.5520 Fax: 1.701.282.9522 Toll Free: 1.888.625.4520
Email: [email protected] Web: www.bearcatproducts.com
ECHO Bear Cat • 237 12th St. NW, West Fargo, ND 58078Specifications, descriptions and illustrative material in this literature is as accurate as known at the time of publication, but are subject to change without notice. Illustrations may include optional equipment and accessories and may not include all standard equipment
©2014 ECHO Bear Cat, a subsidiary of ECHO Incorporated All Rights Reserved.
#32968-00 - Updated 10/2013