Page 1

— Prices Subject to Change Without Notice —

DULTMEIER SALES NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

Each SafeGuard™ Blockage Monitor Kit includes console with mounting hardware, 10’ power cable, 15’ console to hitch cable, 5’ hitch to first sensor cable, the number of blockage sensors indicated and reference manual. Sensors are daisy chained together with wire leads. Implement Whisker Kit allows for raising planter or bar at end of row without tripping SafeGuard™ Monitor (puts monitor in hold temporarily).

Traditional Gang Mounted Kits (3” Wire Leads)Part No. Description Net Ea.MT 1837-08S SafeGuard™ Liquid Blockage Kit with 8 Sensors (3” Leads) .... $ 1602.00 MT 1837-12S SafeGuard™ Liquid Blockage Kit with 12 Sensors (3” Leads).. 2034.00 MT 1837-16S SafeGuard™ Liquid Blockage Kit with 16 Sensors (3” Leads).. 2466.00 MT 1837-24S SafeGuard™ Liquid Blockage Kit with 24 Sensors (3” Leads).. 3330.00 MT 1837-36S SafeGuard™ Liquid Blockage Kit with 36 Sensors (3” Leads).. 4626.00 MT 1837-48S SafeGuard™ Liquid Blockage Kit with 48 Sensors (3” Leads).. 5922.00MT 18498 10’ Extension Cable..................................................................... 86.00

SafeGuard™ Blockage Monitors

FEATURES:• Instantly detects and alerts the operator of blockages

without seeing the sensor - saves neck and back strain and eliminates the need for cameras.

• Audible alarm immediately alerts operator of blockage.

• Visual display immediately alerts operator of blockage.

• Monitors all runs continuously.

• Alerts operator regardless of lighting conditions.

• Same performance Day or Night, Rain or Shine.

• System is not affected by cloudy or dark liquids.

• Achieve full benefits of liquid fertilizer application knowing all rows are applying.

• Blockage notification for a wide variety of product applications, starter fertilizers, herbicides, insecticides, fungicides, fumigants, etc.

SafeGuard™ electronically detects blockages and alerts you with an Audible Alarm and a Visual Display of the blocked row’s number. SafeGuard™ reduces over and under-application, saves money and applies liquid fertilizer with confidence without having to watch flow monitors or outlets.

SafeGuard™ ConsoleCompact in-cab display that monitors, identifies and reacts with lightning speed to immediately alert you to a blockage. Easy-to-use, on/off and volume adjustments are the only user controls. No calibration is required. After installation, simply turn on the console and it will detect how many rows are being monitored and their location (also checks for loose wires). SafeGuard™ brings real time blockage monitoring into the cab.

Installation Flexibility & Savings OpportunitiesNo limitations in mounting configurations. Mount the sensors to suit your needs since the rows are being monitored without the need to see them. Gang sensors together or mount them individually over the row.

D

Standard OutletFitting

D

DurableCase Material

PolyethyleneCartridge &Chamber Window

Standard VitonO-Ring & StainlessU-Clip Connectivity

SafeGuard Console

SafeGuard Sensors

Traditional Ganged Sensor

Installation

SafeGuard Sensors Paired

SafeGuard Console

SafeGuard Sensors

Over the Row Installation

Over The Row Kits (20” Wire Leads)Part No. Description Net Ea.MT 1837-08L SafeGuard™ Liquid Blockage Kit with 8 Sensors (20” Leads)..... $ 1710.00 MT 1837-12L SafeGuard™ Liquid Blockage Kit with 12 Sensors (20” Leads) .. 2196.00 MT 1837-16L SafeGuard™ Liquid Blockage Kit with 16 Sensors (20” Leads) .. 2682.00 MT 1837-24L SafeGuard™ Liquid Blockage Kit with 24 Sensors (20” Leads) .. 3654.00 MT 1837-36L SafeGuard™ Liquid Blockage Kit with 36 Sensors (20” Leads) .. 5112.00 MT 1837-48L SafeGuard™ Liquid Blockage Kit with 48 Sensors (20” Leads) .. 6570.00 MT 01840 SafeGuard™ Implement Whisker Switch Kit ................................ 289.00

— Prices Subject to Change Without Notice —

DULTMEIER SALES NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

• Uses magnetic sensing technology mounted behind the VisaGage II Flow Monitors.

• Sensors can be mounted to existing VisaGage II’s, new magnetic balls are supplied with sensors.

• Identifies where magnetic balls are floating in each row during liquid application.

• Only LBMS shows both no-flow and low-flow. Plus the premium i-Pad® based systems displays high flow, indicating broken tubing or fittings.

• See a visual display and hear an audible alarm on the control panel from your tractor cab.

• Each row with a problem will be highlighted by a flashing LED light at the row. No need to remember or search for which row is blocked after you come to a stop.

• Can be used with cloudy or dark liquids - LED is visible to the column sides.

• The alarm will reset automatically when the blockage has been corrected.

• Includes the ability to “Pause” the system to capture problem rows for investigation later when you are able to stop.

• LBMS i-Pad® App is free and available from the Apple App Store.

Now you can know your liquid application flow from the cab of your tractor. Identify which row is being under applied before your yields are diminished, saving valuable time and money. This system shows you both low-flow and no-flow problems now, which means you can correct it immediately. No more second guessing if any of your delivery lines are plugged!

Features of the CDS-John Blue Liquid Blockage Monitor System:

Liquid Blockage Monitor System

Premium System (Wireless) i-Pad® Based

Premium WIRELESS System (iPad 2 or Newer Display Running IOS 6 or Higher) *Part No. Description Net Ea.BU BMI-08 Premium 8 Row Kit Includes: iPad Ram Mounting Bracket, Power Harness, 28 ft. Extension Harness, Wireless Sensor Kit, Standard Sensor Kit and (2) Terminator Plugs ................................................................... $ 970.00

Standard WIRED System *Part No. Description BU BM-08PL Standard Wired 8 Row Kit Includes: Control Panel with Mount Bracket, Input Harness, 28 ft. Extension Harness, Tee Harness, (2) Standard Sensor Kits, (2) Terminator Plugs and (2) 15 ft. Extension Harnesses ..................... $ 970.00

4-Row Expansion KitPart No. Description BU BMPT-001 4 Row Sensor Expansion Kit for adding to BMi-08, BM-08AP and BMPT-08PL: Includes Standard Sensor, Tee Harness, Magnet Balls and Hardware .............................................................................. $ 315.00Spare PartsPart No. Description BU BMPT-002 Standard Sensor (Replacement) ......................................................................................................................... $ 295.00 BU BMPT-013 15 ft. Harness, Extension Cable .......................................................................................................................... 62.10 BU BMPT-015 Terminator Receptical (Replacement) ................................................................................................................. 12.15

* VisaGage II Flow Monitors are ordered separately.

Order (1) Main Kit (8 Rows) Plus 4 Row Expansion Kits to Cover All Your Rows (extra rows or expansion kits are fine)

Now You Can Know Your Liquid Application Flow from the Cab of Your Tractor!

Standard Control Panel

(Wired)

Sensor Assembly

4 Rows

VisaGage II

D

D

D

Flow Monitors Not Included - See Other Pages

Page 2

Page 3

— Prices Subject to Change Without Notice —

DULTMEIER SALES NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

Air Seeder Hose

D

Flexible Polyurethane Lined PVC Hose for air seeders, abrasive material vacuum systems and industrial vac equipment. Smooth bore, PVC corrugated OD. Lightweight and flexible in cold temperatures to -13° F. The urethane lined tube provides abrasion-resistance, visual check of material flow and prevents material build up. Banding coils and CW spiral clamps are available for end connections.

Wt. Std. Std. Pkg. Per Ft.Part No. I.D. O.D. Lbs. Pkg. Discount Net Ea.KA 100UCLRD-2 2" 2.36" 0.50 100 20% $ 2.95 KA 100UCLRD-212 2-1/2" 2.87" 0.71 100 20% 4.10 KA 100UCLRD-3 3" 3.50" 1.00 100 20% 6.03

Part No. Description Net Ea.SS 6140 Sentry Nozzle Flow Monitor ............ CALL SS 57-00122 Nozzle Flow Meter, Snap In Style ... $ 48.00

Identifying Plugged Spray Nozzles Has Never Been Easier . . .

FEATURES:• Individually Monitor Flowrate

Performance of Every Spray Nozzle on Your Boom

• Sentry 6140 Utilizes a Compact Flow Meter Integrated Into Each Nozzle Body

• Flow Meter Detects Flow Variation Caused by Clogs, Lost or Damaged Nozzle or Upstream Flow Restrictions

• System Can Monitor Up to 75 Spray Nozzles Simultaneously

• Error is Indicated by Audible Alarm, Display Notification & Illuminated LED at the Affected Nozzle

Sentry 6140 Tip Flow Monitor

D

Plugged or partially blocked spray nozzles can have a significant impact on the quality of your spraying job. Streaks in the field caused by misapplication can result in yield reductions, increased weed pressure and the need to reapply — all of which can be costly. The Sentry 6140 Nozzle Flow Monitor provides a simple, reliable solution to this problem. Flow sensors mounted at each spray nozzle location monitor the flow through the nozzle and provide instantaneous feedback to the operator should a nozzle become clogged. By eliminating the need to detect plugged nozzles visually from the cab, operators can cover more acres in a day and know with confidence that their spray nozzles are operating properly.

The turbine style flow meter used with the Sentry 6140 Nozzle Flow Monitor is compact, reliable and proven. The threaded connection allows the sensor to be added onto a wide range of standard TeeJet single and multiple outlet nozzle bodies. ChemSaver® diaphragm check valves remain in place to provide positive spray nozzle shutoff. Ample clearance inside the flow meter means minimal flow restriction and generous free passage for particles contained in the spray solution. Long wearing materials are used in bearing surfaces to ensure a consistent flow reading.

The flow meter sensor is mounted externally to prevent direct contact with the spray solution for long term reliability.

D

Provides Real Time Operating Pressure & Corresponding Droplet Size . . .

Sentry 6120 Droplet Size Monitor

FEATURES:• Provides Real Time Operating Pressure

& Corresponding Droplet Size Category Feedback for Liquid Applications

• Bright Backlight Adjustable Touch Screen

• Image Based Tip Series & Tip Capacity Settings Allow for Simple One-Touch Selection to Choose Your Spray Tip

• Nozzle Capacity Selection Setting Uses ISO Color Coding as Well as Text for Easy Identification & Selection

• Low & High Pressure Alarms Alert Operator When System Pressure Deviates from Operator-Set Limits

• Choose US (PSI) or Metric (Bar)

• Save Up to Five Spray Nozzles to Your “Favorites” for Quick Setting Retrieval

• Kits Include Console with RAM Mount, Pressure Sensor with 25’ of Cable & 2’ Power Cable

D

Part No. Description Net Ea.SS 6120 Droplet Size Monitor with cigarette Lighter Cable ................................... $ 695.00 SS 6120A Droplet Size Monitor with Battery Cable .................................. 695.00 SS 404-0045 Extension Cable, 18’ ........................ 70.00 SS 404-0039 Extension Cable, 25’ ........................ 74.00

Radion 8140 Automatic Sprayer Control

Computer-Controlled Spraying Has Never Been So Easy . . .

Part No. Description Net Ea.SS 8140-5KIT Radion 8140 Kit with 5 Section Control .............. CALL SS 8140-9KIT Radion 8140 Kit with 9 Section Control .............. CALL SS 8140-5 Radion 8140 Console Only, 5 Section Control .. 1350.00 SS 8140-9 Radion 8140 Console Only, 9 Section Control .. 1495.00 SS 45-20237 10’ Extension Cable ............................................. 164.00 SS 90-02476 Pressure Switch .................................................. 218.00

Designed with simplicity in mind, Radion offers spraying advantages not found in other controllers. Simply set your target application rated and the unique VisiFlo® display on the controller helps select the right TeeJet nozzle for the application. Once spraying begins, the large display shows application rate, volume sprayed, system pressure, sprayer speed and area covered.

Radion’s built-in planning tool automatically displays the available speed range for the target rate and spray nozzle that has been selected. This unique visual planning tool makes choosing the correct spray nozzle for an application a quick and simple task. Radion is available as an individual controller, or in a complete package with the valves, cables and sensors needed to put together a total sprayer control system. FEATURES:• Large 4.3” Color Touch Screen

• Tank Level Monitoring & Automatic Filling Function

• Built-In Droplet Size Monitor

• Uses TeeJet 800 Series Cable for Quick Hookup

• Available with 5 or 9 Boom Section Switches Plus Master Shutoff

• TeeJet Spray Nozzle Database is Programmed into the Radion 8140, Making Nozzle Selection Quick & Easy

• Communication Port for Connection to External Variable Rate Controls

• Designed for Direct Connection to TeeJet Matrix Consoles for Auto-Section Control Without Extra Devices

• Kits Include: Console with RAM Mount, 17’ Main Harness & Power Cable (Flowmeter, Pressure Sensor Kit, Regulating Valve & Boom Valves are Extra)

D

Page 4

— Prices Subject to Change Without Notice —

DULTMEIER SALES NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

The Original Speed & Area Monitor Shaft RPM Display

FEATURES:• Accurate Speed, Area and Distance

Measurement

• Wide Range of Use - Sprayers, Tractors, ATV’s, Trucks, Floaters, etc.

• Area Per Hour & Accumulated Hour Functions to Track Progress, Plan Work & Schedule Maintenance

• Provides Shaft RPM Readout (with optional shaft sensor kit)

• Push Button Run/Hold &Distance Measurement

• 3 Independent Area Counters

• Displays True Ground Speed to 1/10 MPH

Calc-An-Acre II™

Part No. Description Net Ea.MT 010000 Calc-An-Acre II with Magnetic Wheel Speed Sensor ....................................... $ 297.50 MT 010001 Calc-An-Acre II Less Speed Sensor ................ 240.00 MT 01539 Shaft RPM Sensor Kit ...................................... 72.35

D

FlowTrak II™ Applicator Monitor

FEATURES:• Application Rate, Flow Rate, Speed,

Distance and Area Per Hour Functions, Plus Three Separate Sets of Area and Total Flow Counters

• Push Button Run/Hold Feature to Stop Area Count When Turning On Ends and Moving Between Fields.

• “Control” Output That Can Turn a Valve or Pump On/Off for Batch Control

• Records Total Volume Applied to the Nearest Tenth of a Gallon

• Track Tank Volume with a Handy Tank Alarm

• Triple Counters for Volume and Area

• Out of Range Warning Light

• Used for Verifying Rate & Other Variables Noted Above but Not For Actual Rate Control.

The FlowTrak II™ is a user-friendly monitor for farmers, custom applicators and grounds keepers needing a simple, low cost way to verify accuracy when applying liquid herbicides and fertilizers.

Part No. Description Net Ea.MT 01170 FlowTrak II™ Monitor Kit with 3/4” Flowmeter ..... $ 682.00 MT 01021 FlowTrak II™ Monitor Kit Less Flowmeter ........... 409.50

D

Part No. Description Net Ea.MT 01757 12 Volt Pump Driver ........ $ 391.50

Electric Pump Driver

D

Enables all current Micro-Trak Rate Controllers to control the rate of flow by regulating the speed of a 12 Volt pump. The EPD replaces the electric servo valve. The EPD will control most 12V pumps to up to a maximum of 40 amps.

12 Volt Pump Flow Control

SprayMate II™ Automatic Rate Controller

FEATURES:• All-In-One Design with

Built-In Controls for Up to (3) Separate Boom Sections

• On-The-Go Rate Adjustment for a Multitude of Rates

• On/Off Power Switch & Master Switch

• Flash Memory for Simple Customizing

• Ag, NH3 & Turf Units• Records Area & Volume in

(3) Independent Pairs of Counters So Individual Jobs May Be Tracked

• Tank Counter Shows Amount Remaining in Tank

• Inline/Bypass Option for Regulating Valves

• Troubleshooting Enhancements Including “No Speed” & “No Flow” Messages

• Push Button Auto/Manual Feature for Spot Treatments• Minimum Flow Feature to Ensure Proper Application Pattern• 20’ Cable Harness Included• See Flowmeter, Speed Sensor & Regulating Valve Options Below

Part No. Description Net Ea.MT 01341 SprayMate II™ Controller with Harness .............. $ 523.00 MT 01171 SprayMate II™ Controller with 3/4” Flowmeter and 1” Regulating Valve ....................................... 981.00 MT 01196 SprayMate II™ Kit for 12 Volt Pump Control: Includes SprayMate II™ Controller, 3/4” Poly Flowmeter (0.5 - 12 GPM), 20’ Cable Harness & 12V Pump Driver (40 amp) ...................................... 1207.00

D

Includes 5’ Cable

Flowmeters

Part No. Description Max. PSI Net Ea.MT 01500 1/2” Poly Flowmeter (0.5-5 GPM) 500 $ 252.00 MT 01501 3/4” Poly Flowmeter (2-40 GPM) 500 252.00 MT 01504 3/4” Stainless Flowmeter (2-40 GPM) 500 442.50 MT 01514 1” Poly Flowmeter (10-100 GPM) 175 417.00 MT 01511 2” Poly Flowmeter, SP Flange (19-198 GPM) 285 729.00

Astro II™ Series GPS Speed SensorsThe Astro GPS Speed Sensors are a direct replacement for magnetic wheel speed sensors or radar guns. The Astro includes (2) red status lights on the interface module, indicating power and satellite fix. For speed only - not for position.

Part No. Description Net Ea.MT 01410 Astro GPS Speed Sensor, 1 Hz ....... $ 250.00 MT 01425 Astro GPS Speed Sensor, 5 Hz ....... 336.00

D

D

Part No. Description Net Ea.MT 00745 3/4” Regulating Valve ............................... $ 195.50 MT 14928 1” FPT Regulating Valve .......................... 206.50 MT 01565 1-1/2” FPT / 2” SP Flange Reg. Valve ...... 283.00

12 Volt Regulating Servo Valves01565

Flanged

DD

Page 5

— Prices Subject to Change Without Notice —

DULTMEIER SALES NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

A revolutionary new process pump that can handle the day after day use in a grueling industrial environment. The SP100 Series Air-Operated Double Diaphragm Pump can be configured in materials that are resistant to many industrial chemicals and proven to provide complete compatibility coverage for a wide range of fluids. With it’s extensive list of features, the SP100 Series outperforms the competition time and time again.

• 15% More Flow & 20% More Efficient

• 66% Less Pulsation & 67% Fewer Parts

• 50% Less Repair Time

• 360° Uniform Seal

Reinforced Manifold An encapsulated stainless steel

ring embedded around the threads prevents over tightening & the

potential splitting of the manifold

The Most Advanced Air-Operated Diaphragm Pump on the Market!

5 Year Warranty

Air-Operated Double Diaphragm Pumps

SP100-10 Series 1” Metallic

Ball Check & Seats The ball & seat sets are matched

elastomer combinations that offer a minimum 20% improvement in suction

lift due to tighter seals.

Unique Diaphragm Construction

A stainless steel shaft with a reinforced diaphragm nut fully supports the

diaphragm & prevents cross threading. The uniform seal hinge minimizes wear.

Easy-Off Threaded Ring Construction

The Quik-Seal® ring is designed for quick-turn access to clear ball checks

& to replace diaphragms.

Ceramic Air Valve

The patented QuikFlow® air

valve provides fast trip over, resulting in a 60% reduction

in pulsation.

Foot MountRetrofits into most

existing mounting plates.

SP100-5 SeriesMaximum Solids: 3/32”Maximum Flow Rate: 17.5 GPMMaximum Air Inlet Pressure/ Discharge Pressure: 100 PSI

SP100-10 SeriesMaximum Solids: 3/16”Maximum Flow Rate: 56 GPMMaximum Air Inlet Pressure/ Discharge Pressure: 100 PSI

5 Year Warranty

Kits & AccessoriesWall Mount Brackets

KITS05KITS10W

KIT180MPPS Tote Plate

Filter/Regulator Assemblies

KITS05M Muffler

D

D

SP100-5 Series 1/2” Non-Metallic

Double Diaphragm Pumps Part No. Ports Body Diaphragm Max. Flow Wt. Net Ea.FR SP100-5S 1/2” Polypropylene Santoprene 17.5 GPM 8 lbs. $ 340.00 FR SP100-5T 1/2” Polypropylene Teflon 17.5 GPM 8 lbs. 448.00FR SP100-10H 1” Aluminum Hytrel 56.0 GPM 15 lbs. 605.00

Kits & Accessories FR KIT180MPPS Tote Plate for SP100-5, 1/2” Pumps .............................. $ 119.00 FR KITS05 Wall Mount Bracket for SP100-5, 1/2” Pumps ............... 28.00 FR KITS10W Wall Mount Bracket for SP100-10, 1” Pumps ................ CALL FR KITS05F Filter/Regulator Assembly for SP100-5, 1/2” Pumps ..... 108.00 FR KITS10F Filter/Regulator Assembly for SP100-10, 1” Pumps ......... 219.50FR KITS05M Muffler for SP100-5 & SP100-10 Pumps ....................... 12.30

Quick Flow Patented Air Valve Assembly

Bolted Manifold for

Quick & Easy Maintenance

Patented Ring Construction

- No Bolts Needed

Page 6

— Prices Subject to Change Without Notice —

DULTMEIER SALES NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

These unique valves are designed to maintain water levels in storage tanks, cisterns or irrigation applications. Eliminates constant stop/start of pumps or water systems. As tanks empty, the weighted float travels down the cord until it hits the bottom stop, the valve then opens giving in full water flow. Float rises to top stop and shuts off valve as water level rises.

Jobe Differential Float Valves

Maximum Part No. Inlet Flow Net Ea.JO TPVD20DLT 3/4” MPT 55 GPM $ 176.50 JO TPVD1DLT 1” MPT 75 GPM 178.50 JO VXVD112 1-1/2” MPT 140 GPM 220.00 JO VXVD2 2” MPT 140 GPM 226.00

Features:• Corrosion-Resistant Materials

• High Flow Rates

• Adjustable Stop & Start Levels

• Reduces Pump Operation

• Fits Almost Any Type of Tank

• Rated from 15 to 150 PSI

Jobe Water Level Indicator

Simple Float and Rod System that shows water level in enclosed or covered tanks. Highly visible indicator. Double bracing arms and mounting bracket. Stainless steel and plastic construction. Overall assembled size is 7’2” (breaks down for shipping).

Part No. Net Ea.JO LIV Water Level Indicator ...... $ 129.50

FPV Freeze Prevention Kit

Part No. Net Ea.JO FPV Freeze Prevention Kit ........... $ 12.15

PMV Valve Cover

PMV Valve Cover is designed for use with Rojo or Topaz Series. Valves mount to bottom portion of cover which then attaches to tank or trough. Top portion attaches to bottom section enclosing and protecting valve from livestock. Robust and durable, UV protected. Dimensions are 7” wide x 16” long x 6-3/4” high.

Part No. Net Ea.JO PMV Valve Cover / Protector ......... $ 52.15

D

FPV Freeze Prevention Kit. For outdoor water applications. Mounts to special top port fitting on the Topaz and Vortex Series Valves. When temperatures approach freezing, cap valve is manually turned to allow a low flow of water to continually pass through the valve. Best used when temperatures will rise above freezing for a few hours each day. Output of up to 5 gallons per hour.

D

Page 7

— Prices Subject to Change Without Notice —

DULTMEIER SALES NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

Waterproof Jackets & Bibs

PVC Jackets and Bibs fit the need when outdoor or indoor work requires waterproof clothing or you work in inclement weather. Also, an ideal choice for washing and cleaning applications such as truck wash, car wash and mobile cleaning. Available in standard weight (35mm) or heavy weight (50mm) construction. Sold in high visibility individual jackets and bibs as noted. Available in Large, X-Large and XX-Large sizes.

Part No. Description Size Color Net Ea.BS 3PR0350N 35mm High Vis Jacket L Fluorescent Green $ 14.50 BS 3PR0350NX 35mm High Vis Jacket XL Fluorescent Green 14.50 BS 3PR0350NXL 35mm High Vis Jacket XXL Fluorescent Green 14.25 BS 3PR0351N 35mm High Vis Bib L Fluorescent Green 8.95 BS 3PR0351NX 35mm High Vis Bib XL Fluorescent Green 8.95 BS 3PR0351NXL 35mm High Vis Bib XXL Fluorescent Green 8.95

10% Discount On 20+ Not Assorted

3PR0350N is a polyester-lined, High-Vis Jacket. 35mm PVC construction. Fluorescent Green with reflective tape on chest and sleeves. Features detachable hood, non-conductive, non-corrosive snaps on front and sleeve cuffs.

3PR0351N is a polyester-lined, High-Vis Bib Overall. 35mm PVC construction. Fluorescent Green with reflective tape on legs. Features non-corrosive snaps and adjustable elastic suspenders.

3PR0500Y is a polyester-lined Jacket. 50mm PVC construction. Features zipper front, covered metal snaps, attached hood, inside cargo pockets, underarm vents and reinforced elbows. Color is yellow, but moss green is also available.

Part No. Description Size Color Net Ea.BS 3PR0500Y 50mm Jacket L Yellow $ 12.95 BS 3PR0500YX 50mm Jacket XL Yellow 12.95 BS 3PR0500YXL 50mm Jacket XXL Yellow 12.95

10% Discount On 20+ Not Assorted

Part No. Description Size Color Net Ea.BS 3PR0501Y 50mm Bib L Yellow $ 13.75 BS 3PR0501YX 50mm Bib XL Yellow 13.75 BS 3PR0501YXL 50mm Bib XXL Yellow 13.75

10% Discount On 20+ Not Assorted

3PR0501Y is a polyester-lined Bib Overall. 50mm PVC construction. Features elastic suspenders, inside chest pocket, hook and loop waist closure, reinforced knees and seat. Color is yellow, but moss green is also available.

D

D

Material Handling Gloves

Cut Resistant, Material handling Gloves from BLACK MAMBA. Made from Ultra-High Molecular Polyethylene Fiber with Polyurethane coating for superior grip and added protection. High tensile strength relative to weight. Tight knit wrist and breathable back means great comfort and dexterity.

Cut Resistant

* Per Pair Part No. Description Net Ea.BM CTR130 X-Large Gloves $ 11.95

* 5% Discount for 12 Pairs

Typical uses include general material handling, HVAC, sheet metal or glass handling, warehouse farm, ranch and industry. ANSI cut rating of 5 and abrasion rating of 3. Sold by the pair

D

Reuseable Neoprene Gloves

Neoprene is one of the best choices for handling a variety of acids and alkalis. Also ideal for use with solvents, herbicides, pesticides, petroleum based solutions and oils. A very good choice for use with NH3 ammonia and LP gas. Offers superior strength and flexibility along with abrasion and cut resistance. Available in 13” and 18” lengths.

Superior Strength & Flexibility

Case/144 Bag/12 Per PairPart No. Size Thickness Discount Discount Net Ea.BS 2919 Large 19-mil 20% (144) 10% (12) $ 3.25 BS 2919XL X-Large 19-mil 20% (144) 10% (12) 3.25

Case/36 Bag/12 Per PairPart No. Size Thickness Discount Discount Net Ea.BS 2539L Large 19-mil 20% (36) 10% (12) $ 13.50

Series 2919 is a flock lined glove with 13-1/2” length for partial forearm protection. Available in Large and X-Large sizes. Sold by the pair, bag or case. Color is Black.

Series 2539 features an absorbent flannel lining for added comfort. 18” heavy duty gauntlet cuff offers excellent protection and tensile strength. Superior grip on wet or dry surfaces. Available in Large only. Sold by the pair, bag or case. Color is Black.

2539L

2919 2919XL

D

D

Page 8

— Prices Subject to Change Without Notice —

DULTMEIER SALES NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

Mamba Trax Shoe Covers

Grip-Rite Trax Covers Provide Better Footing

Than Other Brands !

D

Case/144 pr. Bag/12 pr. Per PairPart No. Size Length Discount Discount Net Ea.BS 7462L Large 10” 20% (144) 10% (12) $ 2.75

Lined Nitrile Palm Coated GlovesKnit Wrist, Smooth Finish

Series 7462L is a lined palm-coated glove with breathable flex-knit wrist and open back for tight fit and added air flow. Color is dark blue. Sold by pair, bag or case. Available in Large only.

7462L

Disposable Nitrile Gloves

Black Mamba and Blue Mamba Nitrile Gloves. Designed for applications where standard disposable gloves just can’t survive. The toughest disposable gloves available, can even be reused in many cases. Patented Nitrex Polymer offers superior strength and tear resistance and three times the chemical resistance of latex or vinyl. Fully textured with Grip Rite finish, made to grip, not slip. Sold in boxes of 100 ambidextrous gloves. 6-mil thickness. Discount available for cases of 10 boxes of one size and color.

The Toughest Disposable Gloves Available !

D

D

D

* Per Box Part No. Color Size Net Ea.BM BLK120 Black Large $ 11.95 BM BLK130 Black X-Large 11.95 BM BLK140 Black XX-Large 11.95 BM BLU120 Blue Large 11.95 BM BLU130 Blue X-Large 11.95* 10% Discount for Cases of 10 Boxes Not Assorted

Ureflex™ UF1™ Series Material Handling Hose

General Applications:• Agricultural Dry Fertilizers• Air Seeder Lines• Material Handling - Heavy Duty

Abrasive• Rock, Gravel, Sand & Crushed

Concrete Vacuuming

D

Heavy-Duty, Polyurethane Lined Material Handling Hose features: Thick abrasion-resistant polyurethane liner designed for dry applications where severe abrasion is a factor • Static dissipative cover • Convoluted outer cover provides increase flexibility • Oil resistant polyurethane liner • Construction is PVC cover with polyurethane liner & rigid PVC helix • Hose remains flexible in sub-zero temperatures • Temperature Range: -40° F. to +150° F.

PSI Vacuum Std. Wt./Lbs. Part No. I.D. O.D. @ 68° F. @ 68° F. Length Per Ft. Net Ea.TF UF1-150X50 1-1/2” 1.85” 50 Full 50’ .42 $ 143.00 TF UF1-150X100 1-1/2” 1.85” 50 Full 100’ .42 286.00 TF UF1-200X50 2” 2.40” 40 Full 50’ .59 233.50 TF UF1-200X100 2” 2.40” 40 Full 100’ .59 467.00 TF UF1-250X100 2-1/2” 3.07” 40 Full 100’ .80 596.00 TF UF1-300X50 3” 3.64” 40 Full 50’ 1.18 393.50 TF UF1-300X100 3” 3.64” 40 Full 100’ 1.18 787.00

- Use with Counter Clockwise Spiral Hose Clamps -

Reuseable Lined Nitrile Gloves - 15-mil

Case/144 pr. Bag/12 pr. Per PairPart No. Size Thickness Length Discount Discount Net Ea.BS 1UH27 Large 15-mil 14” 20% (144) 10% (12) $ 2.05 BS 1UH27XL X-Large 15-mil 14” 20% (144) 10% (12) 2.05 BS 1UH27XXL XX-Large 15-mil 14” 20% (144) 10% (12) 2.05

Series 1UH27 is a lined medium weight glove. 15-mil thickness and 13” overall length for partial forearm protection. Extremely flexible with textured palm for secure grip. Cotton flock lining for added comfort. Color is green. Sold by pair, bag or case. Available in Large, Extra Large and XX-Large sizes.

Series 1UH27

DR-530 Digital Fuel MetersGPI®

D

Part No. Net Ea.GI DR530-3/4 3/4” Digital Fuel Meter ......... $ 255.00 GI DR530 1” Digital Fuel Meter ............ 255.00 GI DR530-112 1-1/2” Digital Fuel Meter...... 261.50

The rugged design protects the digital electronics that come programmed with seven different units of measure. Resettable batch total and non-resettable totalizer. Field calibration is easy from the front panel. Includes fittings that rotate and the meter cover can also be turned. Rated to 50 PSIG.

5 to 30 GPM

Qty. Per Box Part No. Per Box Net Ea.BM MTX50 Black Mamba Trax Shoe Covers 25 Pair $ 9.95 10% Discount On Case of 6 Boxes

Page 9

— Prices Subject to Change Without Notice —

DULTMEIER SALES NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

“Combo-Rate II” Nozzle Body Systems

Part No. Description Net Ea.WL 41333-00 Combo-Rate Saddle/Body, 1 Way, 3/8” Inlet with Manual Shutoff Valve .............................. $ 7.35 WL 41334-00 Combo-Rate Saddle/Body, 2 Way, 3/8” Inlet with Manual Shutoff Valve .............................. 8.10 WL 41364-00 Combo-Rate Saddle/Body, 2 Way, 21/32” Inlet for JD Sprayers with Manual Shutoff Valve 8.25WL 41513-00 Combo-Rate, 3 Way Turret with Manual Shutoff Valve ......................................................... 9.35WL 41514-00 Combo-Rate, 4 Way Turret with Manual Shutoff Valve ......................................................... 9.35 WL 41515-00 Combo-Rate, 5 Way Turret with Manual Shutoff Valve ......................................................... 9.35 WL 41502-11 Combo-Rate, Viton® Repair Kit - to Repair 2,3,4 & 5 Way Turrets ...................................... 19.10 WL 40203-00 Combo-Rate, Adapter for TeeJet “Quick Jet” Cap ................................................................ 1.35 WL 41285-00 Combo-Rate, Male Plug Less U-Clip ................................................................................... .90 WL 20460-04 Combo-Rate, Stainless Steel U-Clip .................................................................................... .95 WL 41100-V12 Combo-Rate, 4 PSI Viton® Diaphragm ................................................................................ 1.77

WL 41515-00 5-Way Turret

WL 41334-00Combo Rate II Saddle/Body

2 Way, 3/8” Inlet. Includes Manual Shutoff Valve (MSO)

Shown here completely assembled with5-Way Turret & Plug

WL 41285-00 Male Plug

WL 20460-04 U-Clip

Combo-Rate II Nozzle Body Systems are designed with the main saddle/nozzle body positioned directly under the boom. This keeps the complete assembly compact, even when the second nozzle body or turret is added. Constructed of glass-filled polypropylene for strength and excellent corrosion-resistance. All components are easily connected with the stainless u-clips. Standard with buna o-rings (Viton® available; enter -V0 suffix instead of -00). 10 PSI diaphragm checks with EPDM (4 PSI Viton® also available). Fits 1” I.D. standard boom pipes.

Viton® is a registered trademark of DuPont Performance Elastomers

“Combo-Rate” Nozzle Body SystemsCombo-Rate Nozzle Body Systems allow you to spray with multiple nozzles (of the same or different sizes) at the same location on the boom, to optimize coverage, canopy penetration and drift control. This allows flowrates and droplet sizes of multiple nozzles to be combined. Unlike conventional nozzle bodies, Combo-Rate nozzle bodies are modular. Constructed of durable glass-filled polypropylene, stainless u-clips and buna o-rings (Viton® available). 10 PSI diaphragm check valves with EPDM are standard (4 PSI Viton® diaphragms are also available).

Part No. Description Net Ea.WL 41376-00 Combo-Rate Saddle, 2 Way for 1” Pipe, 3/8” Inlet ........................ $ 3.85 WL 41375-00 Combo-Rate Saddle, 1 Way for 1” Pipe, 3/8” Inlet ........................ 4.51 WL 41110-00 Combo-Rate Nozzle Body, 2 Way with Manual Shutoff Valve ....... 5.40 WL 41111-00 Combo-Rate Nozzle Body, 1 Way with Manual Shutoff Valve ....... 5.00 WL 41120-00 Combo-Rate Nozzle Body, 2 Way, Air-On Control ........................ 7.95 WL 41121-00 Combo-Rate Nozzle Body, 1 Way, Air-On Control ........................ 7.50 WL 41125-00 Combo-Rate 2 Way, Air Off Control .............................................. 7.00 WL 41126-00 Combo-Rate 1 Way, Air Off Control .............................................. 6.21

WL 41376-00 2-Way Saddle

WL 41375-00 1-Way Saddle

WL 41110-00 2-Way Nozzle Body

with Manual Shutoff Valve

WL 41111-00 1-Way Nozzle Body

with Manual Shutoff Valve

WL 41120-00 2-Way, Air On Control

Nozzle Body andWL 41125-00

Air Off

WL 41121-00 1-Way, Air On Control

Nozzle BodyWL 41126-00

Air Off

D

D

DD

D D

D

D

D D

Page 10

— Prices Subject to Change Without Notice —

DULTMEIER SALES NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

Quick, Easy & Accurate Plumbing Kits for Applying Starter Fertilizer As You Plant!These Kits Include the Following Items Below:

Planter Fertilizer Kits

Planter Fertilizer KitsPart No. Description Net Ea.DU PLANT6 6 Row Planter Fertilizer Kit .... $ 669.00 DU PLANT8 8 Row Planter Fertilizer Kit .... 723.00 DU PLANT12 12 Row Planter Fertilizer Kit .. 842.00

* 1/2” Hose from Pump to Flow Monitor

(not included)

* 1/2” Hosefrom Strainer to

Pump (not included)

* 1/2” Hosefrom Tankto Strainer

(not included)

* Orifice discs not included, sold separately. Sized per

application.

SS 18999EPR:Gaskets Included

SS QJ98590-3/8-2:John Guest

Style Nozzle Bodies

SS QJ98586-NYR:John Guest Style Caps

Pump Speed Controller: Wire to Pump. Also run 3/8”

Tubing from Controller to Flow Monitor for Pressure Reading (wire harness &

tubing included).

100’ of 3/8” Black Tubing for 6 & 8 Row. 200’ of 3/8” Black Tubing for 12 Row.

Wire Harness

Cable Ties

Teflon Tape

DU PLANT6Package also includes:

HY 3350-44P:3/4” Strainer, 50 Mesh

12V Diaphragm Pump:

TK PHB3412:3/4” Hose Barb x 1/2” MNPT Fitting

WL 20525:Clip Tee with Gauge Port

TK 901-1X1/2:Reducer Bushing

TK PHB1212:1/2” Hose Barb

WL 3999-1 & WL3999-0014Spray Monitor Columns

(6) 3/8” Tubing from Flow Monitor to Each of the (6) Nozzle Bodies

6 Row Planter Fertilizer Kit (DU PLANT6)

shown

* NOTE: 1/2” hose & orifice discs not

included in kit.

3/4” Hose from Pump to Flow Divider(6’ Included & Hose Barbs, Clamps)

1-1/2” Hose from Strainer to Pump(6’ Included & 90˚ Hose Barb, Clamps)

1-1/2” Hose from Tank

to Strainer(8’ Included &

90˚ Hose Barb, Clamps)

Note: Do not use orifice discs if included Flow Divider is used.

(6) SS 18999EPR(Only needed with

orifice discs)

(6) SS QJ98590-3/8-2:Nozzle Bodies

(6) SS QJ98586-NYR:Caps

BU FD0610 Flow Divider& (6) LM MC3814

(1/4” MPT x 3/8”Tube Fittings)

Poly Reducing Bushings into Pump

Discharge Port

HY 3350-116P:1-1/2” Strainer, 50 Mesh

Ground Drive Pump

(1-1/2” Ports: Pump not Included

in Kit)

TK PHB112:1-1/2” Hose Barb x 1-1/2” MNPT Fitting

(6) WL 40436-B5:3/8” Tube Adaptor

(6) 3/8” Tubing Runs

(6) WL 20517:3/8” Tube x 90˚

Elbows

(1) WL 3376-4 &(2) WL 20480Spray Monitor

Columns

200’ of 3/8” Black Tubing

Cable Ties(100 Qty.)

Teflon Tape(1 Roll)

DU PLANT6GPackage also

includes:

(6) 3/8” Tubing from Flow Monitor to Each of the (6) Nozzle Bodies

Planter Fertilizer Kits for Ground Drive PumpsPart No. Description Net Ea.DU PLANT6G 6 Row Planter Fertilizer Kit .... $ 648.00 DU PLANT8G 8 Row Planter Fertilizer Kit .... 883.00 DU PLANT12G 12 Row Planter Fertilizer Kit .. 989.00

6 Row Planter Fertilizer Kit for Ground Drive Pumps

(DU PLANT6G) shown

Planter Fertilizer Kits

* NOTE: 1/2” hose & orifice discs not included in kit.

(6) WL 20517:3/8” Tube x 90˚ Elbows

Page 11

— Prices Subject to Change Without Notice —

DULTMEIER SALES NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

Short Handle Faucets

Gate & Drum Faucets for non-flammable, viscous liquids stored in non-pressurized drums or barrels. Excellent choice for dispensing heavy oils, light grease even molasses and honey. Available with short or long handles. 45 to 60 degree discharge allows for optimum flow control. Locking handle design is standard on sizes up through 2”. Made in the USA.

Short Handle Faucets. Cast iron body, (cast or aluminum on 3/4” and 2” sizes) 2” metal stamped handle. Available from 3/4” to 4” sizes. Locking handle up through 2” size. Manual open and close. Ports are male pipe thread.

GATE & DRUM FAUCETS

Part No. MPT Size Wt. Net Ea.SY 71075 3/4" 1.5 lbs. $ 32.95 SY A71075 * 3/4” 1.0 lbs. 45.95 SY 72100 1” 2.0 lbs. 41.95 SY 73125 1-1/4” 2.4 lbs. 38.95 SY 74150 1-1/2” 2.9 lbs. 39.95 SY 75200 2” 3.2 lbs. 42.95 SY A75200 * 2” 1.75 lbs. 59.90 SY 39300 3” 6.7 lbs. 115.00 SY 40400 4” 15 lbs. 229.00* Aluminum body with plated metal handle.

Long Handle FaucetsLong Handle Faucets. Cast iron body with 4” long handle. Available in 1-1/2” to 3” sizes. Locking handle on 1-1/2” and 2”. Manual open and close. Ports are male pipe thread.

Part No. MPT Size Wt. Net Ea.SY 21150 1-1/2" 4.3 lbs. $ 67.95 SY 23200 2” 4.7 lbs. 69.95 SY 10300 3” 10 lbs. 115.50

Self-Closing Faucets

Long Handle Faucets. Cast iron body. Available in 3/4” size with 2” long handle or 2” size with 4” long handle. Automatically closes upon release of handle. Ports are male pipe thread.

Part No. MPT Size Wt. Net Ea.SY S71075 3/4" 1.5 lbs. $ 48.75 SY S23200 2” 6.5 lbs. 119.50

71075 Cast Iron

A71075 Aluminum

D

D

21150

D

D

7433-25031” Express Fitting x 1”

Flange

Express Boom Fittings

Developed to eliminate the shut-off lag time that can result in 70 ft. of overspray. The EXPRESS END CAP allows the compressed air trapped in the boom to bleed out, resulting in a much faster managed shut-off. You can easily retrofit 1” stainless, aluminum and poly pipe booms. For more detail ask for Tech Bulletin #2012-02.

Eliminates the Shut-Off Lag Time

Part No. Description Net Ea. HY 7433-33140 1” High Flow Express End Cap with Plug ............ $ 28.55 HY 7433-3316 1” Standard Flow Express End Cap with Plug ..... 28.55 HY 7433-2502 1” Express Fitting x 1” Straight Flange ................. 15.25 HY 7433-2503 1” Express Fitting x 1” Flange (2 Pieces) ............. 25.80 HY 7433-2608 1” Express Fitting x 1” HB Straight ...................... 15.25 HY 7433-2610 1” Express Fitting x 1” HB Elbow ......................... 15.25 HY 7433-2613 1” Express Fitting x 1” Male Camlock .................. 15.25 HY UFG0100E 1” EPDM Gasket................................................... .80 HY 3410-0044 Retrofit Kit for Standared Flow Aluminum............ 121.00 HY 3410-0043 Retrofit Kit for High Flow Aluminum .................... 121.00 HY 3430-0790 Clamp & Hardware Kit with Pipe O-rings ............. 8.76 HY 7433-2514 Plug, O-ring & Retainer Kit for Hi Flow End Cap .. 9.06

3410-0043Retrofit Kit

for High Flow Aluminum

7433-331401” High Flow Express

End Cap with Plug

3430-0790Clamp & Hardware Kit

7433-25021” Express Fitting x 1” Straight Flange

7433-26101” Express Fitting x

1” HB Elbow

7433-26131” Express Fitting x 1” Male Cam Lock

Straight

7433-26081” Express Fitting x

1” HB Straight

UFG0100E1” EPDM Gasket

7433-2514Plug, O-ring & Retainer Kit

D

D

D

D

D

D

Page 12

— Prices Subject to Change Without Notice —

DULTMEIER SALES NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

SP “EcoScape” Backpack SprayerFast, Efficient & Comfortable Backpack Sprayer for All

Landscape & Commercial Needs!

• Built-In Check Valve in Lid to Prevent Spills from Accidental tipping

• Fold-Back Tubular Handle for Easy Storage & Transport - Ergonomic Design

• Piston - External Pump Capable of 120 PSI of Pressure

• 6” Wide Mouth for Easy Filling & Pouring

• 4 Gallon Blow Molded Tank with Viton® Seal

• Shoulder Straps with Rubber Pads

• Adjustable Plastic Nozzle & Fiberglass Wand

Part No. Description Net Ea.SX ECO-P 4 Gallon Backpack Piston Sprayer $ 90.00

ECO-P

D

P-MAX Centrifugal Pump

COMPATIBLE FOR:

• Water Transfer• Fertilizer Transfer• De-Icing Liquids• De-Watering• Dirty Water• Flood Control• Salt Water• Not for Agchemicals

Performance Data

PSI 15 21 27 31 36 40 45

GPM 180 160 140 120 100 80 40

The MP Pumps P-Max is a high performance gasoline engine driven self-priming centrifugal pump. Its lightweight construction makes it ideal for portable transfer in agricultural, irrigation and other applications.

P-MAX Pumps are constructed of polyester resin with Buna N mechanical seals. Includes 6.5 HP JD engine is EPA and CARB certified. Pumps are equipped with a aluminum (powder coated) role cage. (2) 2” NPT adapters, (2) 2” hose adapters, band clamps and suction strainer. This pump is capable of a 20’ suction lift.

Part No. Net Ea.MX 38095 2” x 2” P-MAX Self-Priming Centrifugal Pump Unit, 6.5 HP ........... $ 285.00

SPECIFICATIONS:

Suction & Discharge: 2” x 2”Housing & Impeller: PolyesterMax. Flow: Up to 180 GPMMax. Head Feet: Up to 113’Seal: Carbon/Ceramic/Buna N

D

Industrial Sprayers

Model 456

Features: Plastic shut-off valve • Heavy duty pump that pressurizes with less strokes • 4-1/2” Tank opening for easier filling and cleaning • High density, polyethylene tank • Extra long, 48” nylon reinforced hose • 28” Unbreakable wand • Automatic pressure relief valve.Model 457R features wheels for easy transport and 72” hose for remote spraying.

D

Part No. Capacity Wt. Net Ea.LO 456 Industrial Handheld Sprayer ............. 2 Gallon 4 lbs. $ 39.50 LO 457 Industrial Handheld Sprayer ............. 3 Gallon 7 lbs. 44.95 SL 457R Industrial Sprayer with Wheels ......... 3 Gallon 9 lbs. 67.50

Model 457R with

wheels

Handheld sprayers engineered for the Professional. Rugged design for harsh environments. Ideal for use with weed and pest chemicals as well as degreasers, carpet care products, disinfectants and many other solutions.

D

Visit Our Web Site athttp://www.dultmeier.com

or E-Mail us at

dultmeier@dultmeier.com

Crimp Machine for Hydraulic & Industrial Hose

• Lightweight Crimper for Up to 1-1/4” Hose

• Simply Dial in the Crimp Setting

• Can Lock in Setting for Multiple Assemblies

• 115 Volt Pump for Stationary or Mobile Use.

• Pressure to 10K

• Die Sets Available for GLX Couplings 1/4” to 1”

Part No. Wt. Net Ea.GA MC4-20C Crimper .............................. 57 lbs. $ 998.00 GA MC4-20P 1/2 HP, 115 Volt Pump ....... 32 lbs. 665.00 GA MC31 - MC39 Die Sets each .................... 9 lbs. 160.00

MC4-20P

MC4-20CD

Page 13

— Prices Subject to Change Without Notice —

DULTMEIER SALES NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

SwitchBlade™ Hydro-Excavation Nozzles

Heavy-Duty, High Impact Nozzles designed for the Hydro-Excavation Industry. Cuts through dirt faster while using less water. Unique design is ideally suited for trenching applications.

Nozzle body features stainless steel housing with non-conductive urethane coating for

added protection against electrical hazards. Tungsten Carbine

nozzles can be easily replaced for flow changes if soil conditions change. Main nozzle body inlet is

1/2” FPT. Overall size is 3.40” wide x 3.40” long. Rated

to 3200 PSI and 180° F.

Complete nozzle is made up of (1) nozzle body and (4) zero degree nozzle inserts. One or more nozzle inserts can be changed as needed for flow rate changes or as wear occurs. Nozzle inserts are special design with 1/8” MPT threads and built-in strainer.

Part No. Description Net Ea.HF 1779-2 Nozzle Body with (4) #2 Nozzles, 7.20 gpm @ 3200 psi .... $ 221.00 HF 1779-3 Nozzle Body with (4) #3 Orifices, 10.80 gpm @ 3200 psi ... 221.00 HF 1779-4 Nozzle Body with (4) #4 Orifices, 14.50 gpm @ 3200 psi ... 221.00 HF 1779-5 Nozzle Body with (4) #5 Orifices, 18.00 gpm @ 3200 psi ... 221.00 HF 1780020 #2 Yellow Nozzle as Replacement ....................................... 24.95 HF 1780030 #3 Greem Nozzle as Replacement ...................................... 24.95 HF 1780040 #4 Orange Nozzle as Replacement ..................................... 24.95 HF 1780050 #5 Purple Nozzle as Replacement ...................................... 24.95

RipSaw™ Hydro-Excavation NozzlesHeavy-Duty, High Impact Nozzles designed for the Hydro-Excavation Industry to complete jobs faster with less run and down time. The RIPSAW™ nozzle blasts a zero degree pattern at up to 3200 PSI while rotating at high speed with an 18 degree cone of coverage.

Constructed of a stainless steel housing and tungsten carbide wear surface with a non-conductive urethane coating for added protection against electrical hazards. Inlet is 1/2” FPT. Overall size is 2.98” W x 4.30” L. Nozzles can be easily rebuilt if required.

Part No. Flow @ 3200 PSI Net Ea.HF 1857-060 5.4 GPM $ 209.00 HF 1857-080 7.2 GPM 209.00 HF 1857-100 9.0 GPM 209.00 HF 1857-120 10.8 GPM 209.00

Bendable Bolt-Down Bollards

New Flexible Bollard Option. No moving parts. Tough, durable plastic resists low mph impacts. Flexes and retains shape memory, returns to height and shape after impact. Bolt down feature allows for placing wherever needed. 4” Diameter x 41” high. Only available in gray color with white reflective top stripe.

Part No. Size Wt. Net Ea.DB TRAD4 4” D x 41” H 12 lbs. $ 285.00

D

Steel Bolt-Down Bollards

Save time and expense by installing bolt-down bollards. Protect equipment and buildings. Ideal for water and gas meters, wash bays, dock doors, etc. No core or excavation needed. Powder-coated, steel construction. 4” O.D. poles have 8” x 8” base with 3/4” corner holes. 6” O.D. poles have 10” x 10” base with 3/4” corner holes. All units are painted safety yellow.

Part No. Size Wt. Net Ea..DB BDB436 4” D x 36” H 40 lbs. $ 79.50 DB BDB442 4” D x 42” H 45 lbs. 123.50 DB BDB642 6” D x 42” H 85 lbs. 196.00

Save Time and Expense !

D

D

Std. Std. Pkg. Per FootPart No. I.D. O.D. Pkg. Discount Net Ea.TF TDH303 3” 3.78” 100’ 20% $ 16.95 TF TDH404 4” 4.82” 100’ 20% 21.50DU TDH3X20 3” Coupled Hose Assembly, 20’ with Part C & E .. 315.50 DU TDH4X20 4” Coupled Hose Assembly, 20’ with Part C & E .. 421.50

Tigerdrop™ Clear Drop Hose - TDH Series

Clear - “See-the Flow” Design

TDH Series Hose is a tank gravity drop fuel hose. For gasoline, ethanol, diesel and biodiesel. Non-permeable Polyurethane (TPU) tube with polyester fabric reinforcement, rigid PVC helix and an embedded grounding wire. Lighter than most conventional rubber hoses. Working pressure is 65 PSI at 68° F.

Features: Lightweight • Superior flexibility in sub-zero weather • “See-the-flow” construction • Grounding multi-strand copper wire • Easy slide helix that has a rigid counter clockwise design • Temperature range is -40° F. to +140° F.

TDH Series

Banding Sleeve

D

Page 14

— Prices Subject to Change Without Notice —

DULTMEIER SALES NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

RF HC88000M(Hose not Included)

Reelcraft Hose ReelsHand Crank / 12 Volt

Hose Max. Part No. Style Capacity PSI Wt. Net Ea.RF HC86000M Hand Crank 3/8” x 150’ 3000 22 lbs. $ 308.00 RF HC88000M Hand Crank 1/2” x 100’ 3000 22 lbs. 328.00 RF PWHC86000H Hand Crank 3/8” x 150’ 5000 22 lbs. 328.00 RF PWHC88000H Hand Crank 1/2” x 100’ 5000 22 lbs. 347.00

D

Reelcraft Hand & Electric Rewind Hose Reels are designed for a wide range of applications such as lawn and turf, pressure washing, pest control, industrial and many more. Available in Hand Crank or with 12-Volt motors. Different styles and pressure ratings for most any hose storage requirement.

All reels feature heavy-duty steel construction with powder-coated finish and lock pins to prevent de-spooling when not in use. Different frame styles can be used for fixed or mobile applications. Hoses Are Not Included. All reels are made in the USA.

HC & PWH Series Hose Reels

HC and PWH Reels feature compact, single cast aluminum base rated to 40,000 PSI tensile strength • Ball bearing swivel with Aflas seal • Adjustable drag screw • Rated to 212° F. • Hand crank only • Compact footprint • Dimensions are 21-1/2” High x 19” Deep x 11-1/2” Wide.

Compact, Single Cast Aluminum Base

RF H18000M

D

H Series Hose Reels

H Series Reels are economical, medium-duty that can be used for plant or field use. Rated to 3000 PSI and 210° F. Steel construction and dual base assembly is standard. Hand crank only.

H16000M and H18000M are 19” High x 20” Deep x 18” Wide.

H29000M is 19” High x 20” Deep x 24” Wide.

Economical, Medium Duty

Hose Max. Part No. Style Capacity PSI Wt. Net Ea.RF H16000M Hand Crank 3/8” x 300’ 3000 34 lbs. $ 224.00 RF H18000M Hand Crank 1/2” x 200’ 3000 34 lbs. 214.50 RF H29000M Hand Crank 3/4” x 150’ 3000 34 lbs. 254.50

Hose Max. Dimensions Wt.Part No. Style Capacity PSI High Deep Wide Lbs. Net Ea.RF CA32106M Hand Crank 1/2” x 100’ 3000 20” 18” 20” 42 $ 229.00 RF CA32118M Hand Crank 1/2” x 325’ 3000 20” 18” 32” 52 242.00 RF CA33118M Hand Crank 3/4” x 175’ 3000 20” 18” 32” 52 308.00 RF EA32118L12D 12 Volt DC 1/2” x 325’ 1000 20” 18” 30” 68 549.00 RF EA33118L12D 12 Volt DC 3/4” x 175’ 1000 20” 18” 30” 75 585.00

CA (Hand Crank) & EA (12-Volt) Reels

CA (Hand Crank) and EA (12-Volt) Reels are designed for rugged, heavy-duty applications. All bolted, unitized construction. Full flow swivel and heavy gauge steel frame. Available in hand crank or 12 -Volt motor design. Aflas seals. Rated to 250° F. and 1000 or 3000 PSI as noted.

Designed for Rugged, Heavy-Duty Applications

RF EA33118L12D

D

Page 15

— Prices Subject to Change Without Notice —

DULTMEIER SALES NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

DEF Hand Pump Systems

System Includes: Lever Action Piston Pump with MicroMatic SS RSV Coupler • 3/4” x 12’ Discharge Hose • Poly Automatic Nozzle • Drum and Drum Valve Not Included.

Part No. Description Net Ea.PJ 56-S1A Lever Action Piston Pump Kit with Automatic Nozzle and MicroMatic SS RSV Coupler .............. $ 395.00 PJ 56-S1M Same as Above Except with Manual Nozzle ........... 325.00 PJ 56-12M Lever Action Pump Kit with Telescoping Pipe ....... 135.00 PJ 56V Polypropylene Piston Pump .................................. 65.00

PJ 56-S1A

PJ 56-S1M

56-S1A Economy Lever Action Piston Pump System is designed to maintain product integrity.

56-S1M Same as 56-S1A Kit, except the automatic nozzle is replaced by a manual nozzle.

56-12M Lever Action Piston Hand Pump Kit with telescoping suction pipe to fit 55 gallon drum (2” MNPT base).

System Also Includes: 3/4” X 12’ Discharge Hose & Manual Shutoff Nozzle with Trigger Lock • Approximately 12 Strokes per Gallon.

PJ 56V

56V Polypropylene Piston Pump that uses Viton™ seals for use with various industrial chemicals such as mild acids, methyl ethyl ketone, DEF fluid and similar fluids. Complete with telescoping suction pipe to fit drums up to 55 gallon. 2” MNPT base. Approximately 12 strokes per gallon. No hose or nozzle included.

1:1 Air Operated Piston Pump supp l i ed w i th

telescoping suction pipe to

fit 55 gallon drum, 3/4” x 12’

discharge hose and poly

nozzle. Pump has 2” MNPT

thread connection. Use PJ

560101 to adapt to buttress

threaded drums.

Part No. Description Net Ea.PJ 56A-12A Air-Operated DEF Pump Kit, Automatic Nozzle, 2” MPT $ 400.00 PJ 56A-12M Air-Operated DEF Pump Kit, Manual Nozzle, 2” MPT .. 300.00 PJ 56A-S1A Air-Operated DEF Pump Kit, Automatic Nozzle and MicroMatic RSV SS Coupler ....................................... 560.00 PJ 560101 Poly Bung Adapter, 2” Male Buttress Thread x 2” FNPT... 7.50

Air-Operated DEF Pumps

D

• 16 oz. Per Stroke

• 1” Hose Barb Outlet

• 2” MPT Inlet

• “Kit” Includes Pump, Suction Tube, Discharge Hose, Ball Valve Nozzle. Bracket Sold Separately - See Adjacent Page.

DEF Hand Pumps

Part No. Description Net Ea.GI LP50 DEF Hand Pump Kit .................................... $ 142.00 GI LP50A DEF Hand Pump ONLY ............................... 68.00GI 118450-51 Pump Bracket for 55 Gallon DEF Drums .... 88.00

DEF Tote Pumping System for 275 Gallon DEF Tanks

• Pump body is tough & rugged with excellent electrical properties; fuse included

• Field replaceable switches for easy maintenance

• Designed to fit 275 gallon DEF “Cage” Tanks with Micromatic Adapters

Part No. Description Net Ea.GI P120-DEFB 12 Volt DEF Tote Pumping System ........ $ 1205.00 GI PA120-DEFB 115 Volt DEF Tote Pumping System ...... 1340.00

These DEF Tote Pumping Systems are specifically designed to work with 275 gallon DEF “Cage” tanks (with 6.5” blue DEF lids and micromatic adapters/suction tubes).

• 16 oz. Per Stroke

• 1” Hose Barb Outlet

• 2” MPT Inlet

• “Kit” Includes Pump, Suction Tube, Discharge Hose, Ball Valve Nozzle. Bracket Sold Separately - See Adjacent Page.

DEF Hand Pumps

Part No. Description Net Ea.GI LP50 DEF Hand Pump Kit .................................... $ 142.00 GI LP50A DEF Hand Pump ONLY ............................... 68.00GI 118450-51 Pump Bracket for 55 Gallon DEF Drums .... 88.00

Kits include 12 volt or 115 volt poly pump, suction hose with Micromatic coupler, 3/4” x 12’ DEF discharge hose, 3/4” SS automatic nozzle and powder-coated pump/nozzle hanger bracket.

Page 16

— Prices Subject to Change Without Notice —

DULTMEIER SALES NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

Part No. Description Net Ea.PJ 70177 DEF Compatible Filter Assembly: Includes Filter Housing & 1 Micron Filter Element .................................................. $ 64.00 PJ 70176 Replacement Filter Element, 1 Micron for Above Assembly 10.00 PJ 701 Polypropylene High Flow Capacity Filter Housing ............... 98.00 PJ 70179 Replacement Filter Element for Above 701 Filter Housing .. 18.50 PJ 70182 Filter Wrench for 701 Only .................................................. 9.00 PJ 70183 Filter Mounting Bracket ...................................................... 52.00

Diesel Exhaust Fluid (DEF) Filters & Accessories

70176

701

70179

70182 Filter Wrench

70177 DEF Compatible Filter Assembly includes filter housing and 1 micron filter element. Large 10” element ensures low pressure drop and large dirt holding capacity. Filter wrench is included. 3/4” FNPT ports.

70176 is a replacement filter element for the above 70177 filter assembly. 1 micron.

701 Polypropylene, High Flow Capacity DEF Filter Housing. Has 1-1/2” FNPT inlet/outlet ports and uses 20” filter cartridge for maximum contaminant holding capacity, filter included. Up to 60 GPM flow rate capacity.

70179 is a replacement filter element for the above 701 filter assembly. 1 micron.

70183 Filter Mounting Bracket

70177D

D

D

Manual Poly Discharge Nozzle

for Diesel Exhaust Fluid3/4” Hose Barb &

Manual Trigger Lock

Part No. Description Net Ea.PJ 389M Manual Nozzle with Trigger Lock, 3/4” HB $ 58.50

D

Part No. Description Net Ea.PJ 398 Automatic Nozzle & Meter Combination $ 395.00

Automatic Nozzle & Meter Combination for Diesel Exhaust Fluid

389M

This ergonomic, all poly construction automatic nozzle and meter combination is compact, lightweight and offers improved reliability for handling DEF. Has 1” male BSP inlet and is supplied with a 3/4” hose barb for easy connection.

398

D

DEF Tank Ventsfor Diesel Exhaust Fluid

PJ 950391

PJ 950392

Part No. TANK VENTS Net Ea.PJ 950391 Filtered Vent with 2” Buttress Threads .......................... $ 33.50 PJ 950392 Filtered Vent with RSV Coupler ..................................... 202.00

In order to vent your DEF tank properly when using a bottom withdrawal valve, you must install one the vents listed below.D

D

Micromatic Closed Drum Valves and Couplers for DEF

Part No. RSV SERIES Net Ea.PJ 195205B Micromatic 2” RSV “Drum” Valve for DEF .................... $ 55.00 PJ 195205 Suction Tube for Use with Micromatic Drum Valve (40” Long for 275 Gallon Cage Tanks) .......................... 8.50 PJ 195205D Micromatic RSV Coupler with 3/4” HB Inlet for DEF ..... 170.00 PJ 195205F Micromatic Fill Coupler for DEF (Fill Only) .................... 255.00 PJ 195205E RSV Drum Valve Dust Cover ......................................... 2.61 PJ 195205C Valve Key for Removal & Install of RSV Drum Valves (1/2” Socket Drive) ...................................................... 118.00

Micromatic Couplers are specifically designed for DEF. Constructed of 316SS with peroxide-cured EPDM Elastomers. Used on many DEF closed transfer tanks to prevent product contamination.

195205F Stainless Steel Coupler for filling closed systems using RSV drum valves. Allows approximately 30 GPM fill rate, coupler is self venting and has 1” MNPT inlet fitting.

PJ 195205F

195205D Closed Stainless Steel RSV Coupler. Self venting with 3/4” hose barb connection. Used to pump DEF from the containers with RSV drum valves in top.

PJ 195205D

195205B Closed Stainless Steel RSV Series Drum Valve. 2” buttress threads.

PJ 195205B

RSV Series

D

D

D

Page 17

— Prices Subject to Change Without Notice —

DULTMEIER SALES NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

D

Base Mounted Centrifugal Pump with C-Face Motor Drive

D

Flow Wt. Part No. Description @ 30 PSI Lbs. Net Ea.DU 234PPE5 2" Poly Pump with 5 HP, 3 Phase Electric Motor with EPDM Elastomers ................. 135 GPM 135 $ 910.00DU 234PPE51 2” Poly Pump with 5 HP, 3 Phase Electric Motor with Viton Elastomers ................... 135 GPM 155 1091.00DU 234PIE5 2” Cast Iron Pump with 5 HP, 3 Phase Electric Motor .......................................... 72 GPM 175 1311.00DU 234PIE51 2” Cast Iron Pump with 5 HP, 1 Phase Electric Motor .......................................... 72 GPM 200 1492.00DU 234PE5SS 2” S.S. Pump with 5 HP, 3 Phase Electric Motor .......................................... 97 GPM 185 1236.00DU 234PE51SS 2” S.S. Pump with 5 HP, 1 Phase Electric Motor .......................................... 97 GPM 210 1418.00

Stainless Steel & Cast Iron Model

Poly Model

Available in Polypropylene • Cast Iron • Stainless

• 3600R TEFC Motors - Single or Three Phase

• 2” Flange Connections

• Motor is Protected by Slinger on Polypro Units, Stainless Shaft Sleeve on Cast Iron & Stainless

• Viton® Internals - EPDM Available

• Steel Baseplate

Eye ProtectionSafety Glasses for eye protection in plants, warehouses, chemical facilities and many other industrial applications. Available in clear or gray. Semi-rimless design features hard coat lens and anti-scratch coating. Adjustable temples for one size fits all. Built-in side shields. Clear is CE EN 166 Certified.

Part No. * Std. Pkg. Net Ea.WL 250-24000 Clear Safety Glasses 144 $ 1.50 WL 250-24001 Gray Safety Glasses 144 1.50

* 20% Discount for Case of 144 Not Assorted

250-24000

250-24001

D

D

Truck Mount Vacuum Hose

TM1225BL

Part No. I.D. Length Color Net Ea.FX TM1225BL 1-1/2” 25’ Blue/Black $ 29.85 FX TM1225G 1-1/2” 25’ Grey/Black 29.85 FX TM250BL 2” 50’ Blue/Black 75.75 FX TM250G 2” 50’ Grey/Black 75.75 FX TM2100BL 2” 100’ Blue/Black 167.00 FX TM2100G 2” 100’ Grey/Black 167.00

Heavy-Duty, Crush-Proof Vacuum Hoses are designed for the rigors of truck mount carpet cleaning machines or industrial vacuum applications. Smooth, flat exterior reduces hand ups on walls, floors, furniture or equipment. Smooth interior for faster material flow. I-helix construction is abrasion-resistant for longer life. Poly welded black cuffs on each end are standard. 1-1/2” x 25’ leader hoses and 2” x 50’ or 2” x 100’ main hoses. Available in Grey/Black or Blue/Black colors.

Heavy Duty Crush-Proof Hose

D

Express Boom AssemblyHypro’s Express Boom Assembly allows you to customize each boom section by choosing the quantity of nozzle bodies either left or right of the tee for each section. Express Boom Assembly has the flexibility to meet any boom design. These single section custom configurations can range from one nozzle body on the left and/or right branch, to five nozzle bodies on each branch. Review the chart below for all configuration options.

Features:

• Standard configuration 1” Sch 5 SS pipe. 20” spacing. Express fittings, 5-way ProFlo nozzle with EPDM 8 PSI DCV.

• Simplifies manufacturing process, assembly time and product numbers.

• Performance tested to 150 PSI rating.

• A complete assembly to eliminate any assembly defects.

Look For This Express Boom Assembly on Our Website: www. dultmeier.com for the PDF on

Configurations & Pricing !