2013webcatalog

www.mfay.com1

M’Fay® Patterns

Our full size patterns are on durable white paper with detailed step-by-step instructions. Alteration instruc-tions, yardage guides, fabric suggestions and workroom hints are also included.

Some of these patterns have been designed with the professional drapery workroom in mind. Our goal is to offer you patterns that work, even for the most diffi cult styles that remain so much in demand.

Our “So Beautiful, Sew Easy” patterns are designed for the less experienced sewer. Patterns marked “Easy To Make” are not only easy but quick!

Our “Trendy Treatments” category has instructional DVD with each pattern (page 47).

All groups enable you to achieve a quality professional look.

Order 24 hours a day, seven days a week on our website at www.mfay.com

Use the handy order form on page 56 to fax, or call our offi ce.

New patterns are constantly being designed.

*On occasion we revise past patterns in order to keep you updated to new and better techniques. These revi-sions make the project easier, faster, and sometimes enable the pattern to cover a broader range as well as more design choices.

We want you to receive the latest editions with as little expense as we can manage. Therefore, if you return an older copy of the same pattern (no matter what condition) we will replace it with the latest copy for half the cur-rent price. If your older copy has never been used and is still in excellent condition, we will replace it for only the shipping cost. The revised date can be found on the cover page of the pattern instructions booklet, and with each pattern description in this catalog.

Return Policy: All products returned are subject to a 20% restocking fee. Shipping charges are non-refundable. Products must be returned within 45 days of purchase. All books, Manuals, Supplements, and Software are non-returnable.

Thank you, we appreciate your business.

4441 Motorsports DriveUnit 40

Concord, NC 28027Phone: 704-795-9888

Fax: 704-795-0192Sales Email: [email protected]

Technical Support: [email protected] Site: www.mfay.com

Copyright©2013 M’Fay Patterns, Inc.

www.mfay.com 2

Arch Treatments

9232...........................................16

9233...........................................16

9297...........................................34

9298...........................................34

9300...........................................35

9301...........................................35

9302...........................................36

Board Mounted Swag

9001.............................................5

9002.............................................5

9007.............................................6

9101.............................................6

9102.............................................6

9105.............................................7

9201.............................................9

9205...........................................10

9206...........................................10

9209........................................... 11

9213...........................................12

9215...........................................10

9216...........................................10

9217...........................................10

9225...........................................14

9227...........................................14

9228...........................................14

9234...........................................16

9261...........................................24

9268...........................................25

9269...........................................25

9270...........................................25

9284...........................................29

9329...........................................43

9330...........................................43

9333...........................................44

9336...........................................45

9339...........................................46

Board Mounted Valances

2000...........................................46

2002...........................................46

9001.............................................5

9101.............................................6

9102.............................................6

9103.............................................7

9104.............................................7

9106.............................................8

9107.............................................8

9109.............................................8

9208...........................................10

9209........................................... 11

9210........................................... 11

9211 ........................................... 11

9213...........................................12

9226...........................................14

9234...........................................16

9235...........................................17

9236...........................................17

9247...........................................20

9248...........................................20

9249...........................................21

9250...........................................21

9251...........................................21

9261...........................................24

9263...........................................24

9264...........................................24

9265...........................................25

9266...........................................25

9267...........................................25

9275...........................................27

9276...........................................27

9277............................................ 27

9284............................................ 29

9291............................................ 32

9293............................................ 33

9294............................................ 33

9314............................................ 38

9315............................................ 39

9325............................................ 42

9328............................................ 43

9335............................................ 45

9336............................................ 45

9340............................................ 47

Bows

9002.............................................. 5

9006.............................................. 5

9239............................................ 18

9268............................................ 25

9319............................................ 39

Cornices

9104.............................................. 7

9210............................................ 11

9247............................................ 20

9248............................................ 20

9249............................................ 21

9250............................................ 21

9251............................................ 21

9252............................................ 22

9253............................................ 22

9285............................................ 30

Curtain Rod Mounted

9204.............................................. 9

9220............................................ 13

9224............................................ 14

9229............................................ 15

9235............................................ 17

9236............................................ 17

Drapery

9006.............................................. 5

9211 ............................................ 11

9226............................................ 14

9232............................................ 16

9233............................................ 16

9287............................................ 31

9288............................................ 31

9310............................................ 37

9311 ............................................ 37

9314............................................ 38

9320............................................ 40

9326............................................ 42

9327............................................ 42

Dust Ruffle & Shams

9262............................................ 24

Finials (fabric)

9207............................................ 10

9212............................................ 11

9237............................................ 17

9238............................................ 17

Headboards

9321............................................ 41

9322............................................ 41

9323............................................ 41

9324............................................ 41

Medallion Mounted

2001............................................ 46

2003............................................ 46

2004............................................ 47

9203.............................................. 9

9260............................................ 23

9279............................................ 28

9280............................................ 28

9282............................................ 29

9283............................................ 29

9290............................................ 32

9292............................................ 32

9296............................................ 34

9297............................................ 34

9298............................................ 34

9299............................................ 35

9300............................................ 35

9301............................................ 35

9302............................................ 36

9303............................................ 36

9304............................................ 36

9305............................................ 36

9306............................................ 36

9307............................................ 36

9308............................................ 36

9310............................................ 37

9311 ............................................ 37

9312............................................ 38

9313............................................ 38

9319............................................ 39

9332............................................ 44

9337............................................ 46

9338............................................ 46

Pillows

9214............................................ 11

9239............................................ 18

9240............................................ 18

9241............................................ 18

9242............................................ 18

9243............................................ 18

9281............................................ 30

9286............................................ 30

Pole Mounted Swag

9006.............................................. 5

9203.............................................. 9

9207............................................ 10

9218............................................ 10

9230............................................ 15

9231............................................ 15

9237............................................ 17

9238............................................ 17

9244............................................ 19

9245............................................ 19

9246........................................... 1 9

9254............................................ 20

9255............................................ 22

9256............................................ 22

9257............................................ 23

9258............................................ 23

9259............................................ 23

9260............................................ 23

9265............................................ 25

9266............................................ 25

9267............................................ 25

9271............................................ 26

9272............................................ 26

9273............................................ 26

9274............................................ 26

9276............................................ 27

9280............................................ 28

9287............................................ 31

9288.......................................... 31

9310.......................................... 37

9311 .......................................... 37

9319.......................................... 39

9320.......................................... 40

9326.......................................... 42

9327.......................................... 42

Pole Mounted Valances

2004.......................................... 47

9107............................................ 8

9235.......................................... 17

9236.......................................... 17

9265.......................................... 25

9266.......................................... 25

9267.......................................... 25

9271.......................................... 26

9275.......................................... 27

9276.......................................... 27

9278.......................................... 28

9282.......................................... 29

9289.......................................... 31

9290.......................................... 32

9292.......................................... 32

9295.......................................... 33

9298.......................................... 34

9310.......................................... 37

9311 .......................................... 37

9312.......................................... 38

9313.......................................... 38

9314.......................................... 38

9319.......................................... 39

9331.......................................... 44

9334.......................................... 45

Rosettes

9005............................................ 5

9105............................................ 7

9107............................................ 8

9204............................................ 9

9205.......................................... 10

9212...........................................11

9224.......................................... 14

9225.......................................... 14

9232.......................................... 16

9233.......................................... 16

9236.......................................... 17

9265.......................................... 25

9266.......................................... 25

9267.......................................... 25

9303.......................................... 36

9325.......................................... 42

9333.......................................... 44

Shades

9219.......................................... 12

9221.......................................... 12

9222.......................................... 13

9223.......................................... 13

9293.......................................... 33

9316.......................................... 39

9317.......................................... 40

9318.......................................... 40

Tiebacks

9255.......................................... 22

9256.......................................... 22

9309.......................................... 37

CONTENTS

www.mfay.com3

Easy patterns to

construct

2000...........................................46

2001...........................................46

2002...........................................46

2003...........................................46

2004...........................................47

9204.............................................9

9220...........................................13

9224...........................................14

9226...........................................14

9229...........................................15

9275...........................................27

9276...........................................27

9277...........................................27

9278...........................................28

9282...........................................29

9283...........................................29

9289...........................................31

9295...........................................33

9303...........................................36

9304...........................................36

9305...........................................36

9306...........................................36

9307...........................................36

9308...........................................36

9310...........................................37

9311 ...........................................37

9312...........................................38

9313...........................................38

9315...........................................39

9331...........................................47

9334...........................................45

9340...........................................47

Moderate patterns to

construct

9001.............................................5

9002.............................................5

9005.............................................5

9006.............................................5

9007.............................................6

9102.............................................6

9103.............................................7

9106.............................................8

9107.............................................8

9109.............................................8

9201.............................................9

9205...........................................10

9206...........................................10

9207...........................................10

9208...........................................10

9209...........................................11

9210...........................................11

9211 ...........................................11

9212...........................................11

9213...........................................12

9214...........................................11

9215...........................................10

9216...........................................10

9217...........................................10

9218...........................................10

9219...........................................12

9221...........................................12

PATTERN CATEGORIESWhat is the difference between a Professional Workroom pattern and a So Beautiful, Sew Easy pattern?

Sometimes (but not always) the sewing technique is more difficult. We expect the professional to be familiar with certain

procedures and terminology. Some of these patterns are not difficult for the experienced home sewer, however you may

not understand the terminology. If you have our Designer’s Digest and Workroom Manual Collection, you can look up the

meaning of these words and procedures.

9222............................................ 13

9225............................................ 14

9227............................................ 14

9228............................................ 14

9230............................................ 15

9231............................................ 15

9232............................................ 16

9233............................................ 16

9234............................................ 16

9235............................................ 17

9236............................................ 17

9237............................................ 17

9238............................................ 17

9239............................................ 18

9240............................................ 18

9241............................................ 18

9242............................................ 18

9243............................................ 18

9244............................................ 19

9245............................................ 19

9246............................................ 19

9247............................................ 20

9248............................................ 21

9249............................................ 21

9250............................................ 21

9251............................................ 21

9255............................................ 22

9256............................................ 22

9257............................................ 23

9258............................................ 23

9259............................................ 23

9260............................................ 23

9261............................................ 24

9262............................................ 24

9263............................................ 24

9264............................................ 24

9265............................................ 25

9266............................................ 25

9267............................................ 25

9268............................................ 25

9269............................................ 25

9270............................................ 25

9271............................................ 26

9272............................................ 26

9273............................................ 26

9274............................................ 26

9279............................................ 28

9281............................................ 30

9284............................................ 29

9286............................................ 30

9287............................................ 31

9288............................................ 31

9290............................................ 32

9291............................................ 32

9292............................................ 32

9293............................................ 33

9294............................................ 33

9296............................................ 34

9297............................................ 34

9298............................................ 34

9299............................................ 35

9302............................................ 36

9309............................................ 37

9325............................................ 42

9326............................................ 42

9327............................................ 42

9328............................................ 43

9329............................................ 43

9330............................................ 43

9332............................................ 44

9333............................................ 44

9335............................................ 45

9336............................................ 45

9337............................................ 46

9338............................................ 46

9339............................................ 46

Difficult patterns to

construct

9101.............................................. 6

9104.............................................. 7

9105.............................................. 7

9203.............................................. 9

9223............................................ 13

9252............................................ 22

9253............................................ 22

9254............................................ 20

9280............................................ 28

9285............................................ 30

9300............................................ 35

9301............................................ 35

9314............................................ 38

9316............................................ 39

9317............................................ 40

9318............................................ 40

9319............................................ 39

9320............................................ 40

9321............................................ 41

9322............................................ 41

9323............................................ 41

9324............................................ 41

Do you need technical assistance?

From our website, try our Frequently Asked Questions page for general

information and answers.

Click on Technical Assistance for help with reading yardage and ques-

tions about specific patterns. If you can’t find the answer to your ques-

tion, send it to [email protected] for assistance.

Click on Yardage Pages, it has pdf files of the yardage pages from the

instructions on all of our patterns.

Each month we add a new Tip of the Month with workroom tips and

tricks to save you time.

www.mfay.com 4

Valance ................................ 9335 Pattern is used.

Jabots .................................. 9247 Pattern is used.

Side Valance .............................................. 9328 Pattern is used.

Middle Swag .............................................. 9319 Pattern is used.

Swag Tails ................................................. 9279 Pattern is used.

Tiebacks .................................................... 9256 Pattern is used.

Pillow ......................................................... 9240 Pattern is used.

Installation - One mount board. Middle swag overlaps side valance about 2” at each side. Tails

place on top. Attach swag and tails to the top of the mount board with a short ribbon. The top of

the swag attaches to the medallion (projection same as mount board). Curtains install separately.

Window 523

Valance - 9319 Antoinette Valance pattern is used.

www.mfay.com5

Empire Valance Professional Workroom 9001$27.00

Gathered Fan Swag Professional Workroom 9002$27.00

Rosettes Galore 9005Professional Workroom $27.00

A formal valance with deep pleats that originates from the top of the board

and cluster around the horn section. It and the jabot are cut with a straight

bottom allowing you to use fabric borders and wide braids. Can be cut as a

seamless valance if desired. Includes cutting lines for 16”, 18”, and 20” swag

depth. A single swag section can be 14” to 38” wide; add more swag sections

for lager windows. No swag alterations.

*Revised 1995

For deeper swag depths,

See page 16 and 29.

This swag design has three pleats at the bottom. The top por-

tion is gathered to create a fan shape. The top and bottom

pieces are cut separately and then sewn together. This al-

lows you to use contrasting fabrics, if you like. The seam that

joins them will not show. The swag widths extend 32” to 54”.

The swag depth is 18”. When more than one swag is used,

side by side, use the tail to fill the gap in between. The tail

is 14” deep. The jabot hangs about 33” deep. Bow pattern

included. No alterations.

*Revised 2003

Complete patterns and instructions for four

styles of rosettes. *Revised 1993

For more rosettes, see page 11.

For other swag depths,

See page 25.

Flip Pole Swag 9006Professional Workroom $27.00

Includes a swag pattern de-

signed to be flipped. Swag

section extend 22” to 34”.

This type of swag is not ef-

fective in wider sizes. Swag

depths are 16” or 18”. Jabot

is 41” deep. Tail can be 20” or

22” deep. All items are made

separately. Also included are

instructions for the “poufy”

top of the cafe curtain, and

the bow.

*Revised 2005

www.mfay.com 6

9007 So Beautiful, Sew Easy Gathered Swag With Sleeves$27.00

9101 Professional Workroom Kingston Valance$27.00 DVD now available on page 47

9102 Professional Workroom Murphy Valance$27.00

The gathered swag pattern will accommodate windows 36” to 53”

wide (using only one swag section), and 18” deep. The pleated

sleeve pattern and the gathered sleeve pattern finish at 14” deep.

Banding pattern and instructions are also included for the swag

and gathered sleeve. A tail pattern is provided for use on larger

windows which require more than one swag section.

*Revised 2005

All new instructions for an easier construction!

It’s different from the Empire! Fullness comes from behind the horns

vs. from the top of board. Requires a different shape of the pattern

and different construction. Can be gathered or pleated. Can be cut

as a seamless valance, if desired. Includes cutting lines for 16”, 18”,

and 20” swag depth. A single swag section can be 16” to 38” wide,

add more swag sections for larger windows. Jabot depth is 30” to 35”.

The actual pattern instructions have been upgraded and improved.

We have also included an additional jabot that has a curve bottom

shape.

*Revised 2007

Jabots and tails are cut for flair at the top. Elegant swag has fullness

only on bottom. Instructions included for construction of board and

for applying rope. The patterns offer swag depths of 18” to 24” and

swag width of 16” to 34”. Add as many swag sections as the window

may need. Jabot is 38” to 44” deep. Jabot can be altered. Tail depth

is 18” to 22”. No swag alterations.

*Revised 1998

www.mfay.com7

Shoulder Valance So Beautiful, Sew Easy 9103$27.00

Butterfl y Swag Professional Workroom 9105$27.00

Curved Box Valance Professional Workroom 9104$27.00

Valances can be any width, any depth. As is, it will finish 15” at shortest and 22”

at tapered sides. The header is an additional 3”. Optional petticoat will drop 2”

below the valance. Unusual curve of the board pattern creates the shoulder ef-

fect. Braid instructions are included.

A cornice topper, valance attaches underneath. Pattern

fits a width of 48”. Other sizes will require alterations

(included). Not recommended for sizes wider than 56”.

The arch is 4” higher at center.

Both valances can be 16”, 18”, or 20” deep at the

deepest side. Depth alterations are included.

*Revised 2005

*Revised 1996

Each straight top scallop

can be as wide as you

want. Can’t add or take

away sections.

This design consists of two swag sections that must

be cut as a pair. They are joined together with a

shirred seam in the middle. The mount board, (pat-

terns and instructions are also included), has a 5”

arch, upward, at the center. Fits windows 48” to

54” wide. Suggestions for 45” to 70” wide. Jabot

is 46” deep.

*Revised 2001

An alternative Tail

Pattern is included.

www.mfay.com 8

9106 So Beautiful, Sew Easy Cascade Valance$27.00

9109 Professional Workroom Imperial Valance$27.00

9107 Professional Workroom Queen Ann$27.00

A shaped valance attached to a board frame. The jabot and tails are added separately. Depth alterations are included. Each

tapered side scallop adjusts between 13” to 19” wide. Each center scallop adjusts between 16” to 24”. Jabot is 33” deep. Tail is

16” deep.

*Revised 1999

Flat scallop widths can go 8’ to 28” with-

out alterations on your part. Can be in-

stalled on a curtain rod, pole with rings,

or a board mount. Depth of valance is

16” with a short point of 12”. Depth can

be altered.

*Revised 1998

The flat scallop sections can extend 12” to 36” wide without alterations.

Depth of valance is 18”. The depth can be altered. The box jabot is 22”

deep.

*Revised 1999

Board Mounted

View B

View A

View A

A D

B E

C F

www.mfay.com9

Criss-Cross Swag So Beautiful, Sew Easy 9201$27.00

Empire On A Rod So Beautiful, Sew Easy 9204$27.00

Kingston Pole Swag Professional Workroom 9203$27.00

Swag is flat at the top with three pleats at the bottom. A slit behind the pleats

allow these swags to criss cross. Swag widths are 32” to 54” and depth is 18”.

No swag alterations beyond these sizes. The jabot hangs 42”. Alter the jabot

at top only.

*Revised 2005

All new instructions for an easier construction!

Each swag will adjust 14” to 28”. Swag depth can be 18”, 20”, or 22”.

You can use the regular horn of the alternative double horn. Use the

regular return or switch to the alternative jabot.

The actual pattern and instructions have been upgraded and improved.

*Revised 2007

Valance is 16” deep, shortest area is 12” deep. Each swag cov-

ers a span of 15” to 24” wide. A simple version of the Victorian

Valance. This pattern can be cut seamless. Bottom edge is

cut straight allowing you to use fabric borders and wide braids.

This pattern is to be used with a narrow curtain rod and with no

header. If you want a wider rod and/or header use the 9229 pat-

tern (page 15). No alterations.

*Revised 1993

Easy To

Make!

www.mfay.com 10

9205 - 18” Swag Depth with Six Pleats So Beautiful, Sew Easy Basic Pleated Swag9206 - 15” Swag Depth with Five Pleats Each Package $27.00 9215 - 20” Swag Depth with Seven Pleats 9216 - 22” Swag Depth with Seven Pleats 9217 - 24” Swag Depth with Eight Pleats

9207 - 15” and 18” Swag Depth Professional Workroom Basic Pole Swags9218 - 20”, 22”, and 24” Swag Depth Each Package $27.00

Each package contains a set of three swag pat-

terns which will take you through a range of width

sizes of 30” to 54”. Each size will fit exact with no

pleat adjustments required on your part. A chart is

included for windows needing multiple swag sec-

tions. Rosette pattern included. Jabot can be any

depth. No swag alterations.

This is a casual pole swag. The fullness area is

“scrunched” by hand and tied, for an overlap of 3”. Can-

not be pleated. Swag width extends 28” - 54”. Fabric finial

pattern included.

Jabots can be any depth.

*Revised 1999

Each side section can be 20” or up to 28” wide and hangs

19” deep. Each scallop section can be 20” or up to 28”

wide and hangs 16” deep.

The jabot hangs about 38” deep. The tail is 16” deep.

Alteration suggestions (for depth) are included.

*Revised 2010

This design can be used with a side section at each side and

scallop sections in between. Separate tails place over the seams.

Separate jabots cover the mount board ends. Another choice is to

use only scallop sections, with tails and jabots. The other alterna-

tive is to use just the two side sections with a tail and jabots.

*Revised 1993

9208 Professional Workroom Bordeaux Valance$27.00

Also see page 43.

www.mfay.com11

Vienna Valance Professional Workroom 9209$27.00

Chantilly Valance So Beautiful, Sew Easy 9210$27.00

Melody Valance So Beautiful, Sew Easy 9211$27.00

Easy Rosettes & Finial 9212So Beautiful, Sew Easy $27.00

Fun Pillows 9214Professional Workroom $27.00

The swag sections (and returns) may be pleated, or use a shirr tape for gath-

ers. Three alternative tail pieces; one of which protrudes slightly above the

top of the board. The bottom of this tail section has a completed circle horn

effect at the bottom while the top curve area fans out from side to side. Swag

widths are 20” to 26” and swag depth is 18”. Alteration instructions are in-

cluded.

*Revised 2005

The shape of the cut allows for plenty of fullness at the bottom while the top remains smooth, with no gathers or pleats. Fits any

width. Depth has cutting line for 12” , 15”, and 18”. The toppers are soft, three styles are included. Both valance and topper attach

to the same board.

*Revised 2010

Two valance styles, fit any size window. The flat shaped area is 20” wide, gathers are at each side. Repeat the flat areas if desired.

The package also contains complete step by step instructions for making rod pocket curtains.

*Revised 2008

Complete patterns and instructions for Basketball, Football, and

Purse Pillows.

*Revised 2006

By popular request

we have combined

some of our previ-

ous rosettes and our

classic fabric finial

into one package.

www.mfay.com 12

9213 Professional Workroom Squire Valance$27.00

9215, 9216, 9217 Basic Pleated Swags .................................................................... See Page 109218 Pole Swag .......................................................................................................... See Page 10

The unique shape at the bottom of the swags give it interest and elegance. Swags widths extend 14” to 18”. The swag depth is

22” at the center and quickly rises to 18” 1/2” at either side of the horn. The horn is 14” at the shortest point. Use a simple return or

jabot. The squire jabot is 35” deep. No alterations. *Revised 2001

9219 B&C Roman Shades$27.00 Professional Workroom

9221 A Gathered Balloon Shades$27.00 with Skirt

9221 B Pleated Balloon Shades$27.00 with Skirt

9219 A Roman Shades$27.00 Professional Workroom

9219 D Hobble Shades$27.00 Professional Workroom

Instructions are for Roman Shades

with a straight bottom edge. These

are cordless shades, featuring

the Sure Shades™ lift system

with roller tube and lift bands by

www.rowleycompany.com.

*Revised 2010

Instructions are for Roman Shades with a decorative bot-

tom edge. Matching valance is optional. These are cord-

less shades, featuring the Sure Shades™ lift system with

roller tube and lift bands by www.rowleycompany.com.

*Revised 2010

Instructions are for Hobble Shades

with a flat back. These are cordless

shades, featuring the Sure Shades™

lift system with roller tube and lift

bands by www.rowleycompany.com.

*Revised 2010

Instructions are for Gathered Balloon

Shades with or without a skirt. These shades cannot have trim on the bot-tom edge. Encased lift cord tape is

used featuring the Ez-Rig™ lift system

by www.rowleycompany.com.

*Revised 2010

Instructions are for Pleated Balloon

Shades with or without a skirt. These shades cannot have trim on the bot-tom edge. Encased lift cord tape is

used featuring the Ez-Rig™ lift system

by www.rowleycompany.com.

*Revised 2010

View B

View C

Thin jabot

Simple return

Squire jabot

www.mfay.com13

Standard Gathered Balloon Shades Professional Workroom 9222 A&B$27.00

Standard Pleated Balloon Shades Professional Workroom 9222 C&D$27.00

Empire Balloon Shades Professional Workroom 9223$27.00

Rod Pocket Swag So Beautiful, Sew Easy 9220$27.00

This is the most common version of a Gathered Balloon Shade.

These shades can have trim on the bottom. Encased lift cord tape

is used featuring the Ez-Rig™ lift system by www.rowleycompany.

com.

*Revised 2010

This is the most common version of a Pleated Balloon Shade. A

London Shade is pattern 9316 (page 41). These shades can have

trim on the bottom. Encased lift cord tape is used featuring the

Ez-Rig™ lift system by www.rowleycompany.com.

*Revised 2010

These shades have a horn effect at the bottom. Trims can also be

added. Encased lift cord tape is used featuring the Ez-Rig™ lift

system by www.rowleycompany.com.

*Revised 2011

Each piece of this rod pocket swag is made and put on the rod

separately, giving opportunities for more than one style. In-

structions included to adapt to a board mount, allowing swags

to be overlapped. Depth of swag is 15” and 18”. Jabot can

be any depth. No swag alterations.

Each swag can fill 20” to 24” of rod space. Each jabot fills 6”

to 8” on face of rod. Each tail fills 2”.

View A

View A

View C

View B

View B

View D

LOOK FOR MORE SHADE PATTERNS ON PAGES 39 and 40.

Easy To

Make!

www.mfay.com 14

This is a beautiful and easy way to use a contrast fabric, giving the illusion of a complicated banding. With View A, the middle scallops

finish 15” deep, jabots 30” with a 2 1/2” continental rod in the center. View B, with a straight bottom hangs 12” deep from the top of

the rod, jabots 25 1/2”. View C has the straight bottom at the rear and the scallop bottom in front. Each small scallop fills 5” to 7” of

rod space. Each jabot has two top scallops that covers 10” to 14” of rod space (this includes returns).

9224 So Beautiful, Sew Easy Petal Valance$27.00

9225 So Beautiful, Sew Easy Turban Swag$27.00

View A View C View B

Easy ToMake!

Rosette PatternAlso Included.

A single swag section can be 22” to 54” wide x 18” deep. Allow 18” to 24” for an overlap. For larger windows add swags from

pattern 9205 between the turbans. Rosette finishes 8”. *Revised 2005

9226 The Manhattan$27.00 So Beautiful, Sew Easy

So Beautiful, Sew Easy Basic Gathered Swags

9227 - 15” and 18” Swag Depth $27.009228 - 20”, 22”, & 24” Swag Depths $27.00

This sophisticated contemporary window treatment is very easy to

make. Pattern fits window up to 54” wide. Swag depth is 16” to

18” at deepest and 8” at shortest. Jabot depth is 26 1/2”.

*Revised 2005

A chart is included for windows

needing multiple swag sec-

tions. Jabots can be altered.

No swag alterations.

Gathered with shirr tape. Width sizes are 30”

to 54”.

www.mfay.com15

Victorian Valance So Beautiful, Sew Easy 9229$27.00

Easy Pole Swag So Beautiful, Sew Easy $27.00 - 15” Swag Depth - 9230 $27.00 - 18” Swag Depth - 9231

This rod pocket valance can be used with a standard curtain

rod or with a 2 1/2” continental rod. It can be made with or with-

out a 2” header, with jabots or with simple returns. The elabo-

rate headers are sleeves on a 2 1/2” continental rod, installed

separately to hug the top of the valance. These sleeves can

also be used to create beautiful window treatments on their

own. One swag covers 15” to 24” of rod space. Each jabot

fills a span of 6”, plus returns. Valance depths are 16”, 18”, or

20”. Jabot is about 30” deep.

Swags are cut on the lengthwise grain for easy fabrication and to mimic the casual

look of a throw swag. Pockets can be a contrast fabric or they can be cut with the

pockets being a part of the unit eliminating the pocket seam. Optional trim can be

sewn into the pocket seam. Swag sizes are 34” - 54” wide.

Window 573Valance – 2004 Sterling Valance pattern is used. Extend the valance to have a return.Tails – 9260 Drapery Swags IV pattern is used.

Window 574Valance Center Section – 2002 Cambridge Valance pattern is used. Jabots - 9291 Milan Valance Pattern is used.

www.mfay.com 16

9232 Professional Workroom Arched Window Swags I$27.00

9233 Professional Workroom Arched Window Swags II$27.00

9234 Professional Workroom Elaborate Empire Valance$27.00

Easy installation for inside or outside mount. Top center

of swags can loop through a decorative ring, drape over a

hold back, or tie it up with the beautiful fabric oval rosette

(pattern included). Side of swags attach to window facing

with Velcro®.

Swags cannot be used for other sizes or for other designs.

No alterations.

Three decorative rings or hold backs can attach these

swags, or use the beautiful oval rosette pattern included.

Side of swags attach to window facing with Velcro®. At-

tach a full side panel under the swags or use a privacy

curtain with the stylish “Flared Pleats”. A pattern guide for

the pleats and full instructions are included.

Swags cannot be used for other sizes or for other designs.

No alterations.

Elegant and curvaceous! The optional

horn inserts and overlays are unique

and add even more richness and grace.

The pattern has cutting lines for 24”, 26”,

and 28” swag depth. Swag widths are

18” to 28”. Jabot can be any depth. No

swag alterations.

Swags have formal pleats for windows 54” - 74”

(measuring straight across half circle at the widest

place).

Patterns fi t windows 42” - 54” (measuring

straight across half circle at the widest place).

www.mfay.com17

Mix and Match Valances So Beautiful, Sew Easy 9235$27.00

Mix and Match Valances II So Beautiful, Sew Easy 9236$27.00

Mix and match with our #9236. Use the rod of your

choice with an ornate header or a simple straight

header. Without a header or pocket, the valance bot-

toms convert easily to a gathered-shaped valance for

a board mount. 16” deep point, 12 1/2” short point,

tapered sides 27”. Additional 2” to 6” above rod.

Board Mount!

Contains patterns for four valance bottoms and three

headers that can be mixed and matched to create numer-

ous valance styles. These can also be mixed with pattern

#9235. You will be able to fit any depth, any width window.

Two Rosette patterns included. Same depths as #9235.

Designer Pole Swag $27.00 - 18” Swag Depth with Six Pleats - 9237Professional Workroom $27.00 - 24” Swag Depth with Eight Pleats - 9238

This is a formal pleated pole swag with an overlap size of 10” and it can easily convert to a gathered style. The swag width will ex-

tend 30” - 54”. An easy mathematical formula will teach you how to determine swag sizes for windows needing more than one swag.

Fabric finial pattern included. Jabot can be altered. No swag alterations.

www.mfay.com 18

9239 Professional Workroom Accessory Pillows I$27.00 Sizes 12” - 26”

9240 Professional Workroom Accessory Pillows II$27.00 Sizes 12” - 26”

9241 Professional Workroom Accessory Pillows III$27.00 Sizes 12” - 26”

9242 Professional Workroom Accessory Pillows IV$27.00 Sizes 12” - 26”

9243 Professional Workroom Accessory Pillows V$27.00 Sizes 12” - 26”

View A

View A

View A

View B

View C

View C

View C

View B

View B

www.mfay.com19

Empire Pole Swag Professional Workroom 924418” - 20” Swag Depth $27.00

Empire Pole Swag Professional Workroom 924522” Swag Depth $27.00

Empire Pole Swag Professional Workroom 924624” Swag Depth $27.00

An elegant pole swag. Much easier to make than the Kings-

ton Pole swag. Two horn styles to choose from. Swag

widths are 14” to 20”. The jabot hangs about 40” or 42” and

can be altered to any depth. No swag alterations.

Swag widths are 16” to 22”. The difference between this pat-

tern and the 9244 is the swag depth and the jabot style. The

jabot is cut on a curve to give more volume at the bottom. It

hangs about 46” deep. The 9244 jabot could be substituted.

This jabot has one more pleat than the 9244. No alterations.

Swag widths are 16” to 22”. The jabot is made and

attached to the valance as a separate unit. The jabot

hangs about 57” deep. No alterations.

www.mfay.com 20

9247 Professional Workroom Louis XV Valance$27.00

9254 Professional Workroom The Napoleon$27.00

9248 Professional Workroom Cornices 1-4$27.00

Pattern can be used for soft or upholstered cornices. In-

structions are for soft cornices. Center of board juts out-

ward 4”. Unusual jabot hangs 40” deep. No alterations for

the jabot. A pattern for the horn, used in the above sketch,

is also included. Valance has a 20” deep point and 12”

short point. Horns are 20” deep.

Each swag will adjust 14” to 26” wide. Swag

depth can be 18”, 20”, or 22”. The jabot fin-

ishes 44” - 49”.

Patterns CP-1 through CP-16 can be used for soft or upholstered cornices. Instructions that are in the package are for soft cornices only. Alteration instructions are included.

CP-1 CP-2 CP-3 CP-4

www.mfay.com21

Patterns CP-1 through CP-16 can be used for soft or upholstered cornices. Instructions that are in the package are for soft cornices only. Alteration instructions are included.Complete instructions for upholstered cornices are now available (see below).

CP-5 CP-6 CP-7 CP-8

Cornices 5-8 Professional Workroom 9249 $27.00



Upholstered Cornices 4003 $20.00

CP-11CP-10CP-9

CP-13 CP-14 CP-15 CP-16

CP-12

Detailed instructionsfrom simple to ornate!

CP-3 Pattern is used(Others can be used)

CP-14 Pattern is used(Others can be used)

Top shape - CP-9Bottom shape - CP-1CP-17 Pattern is used

www.mfay.com 22

9252 Professional Workroom Cornices 17-20$27.00

9253 Professional Workroom Lambrequins 21-24$26.00

9255 Professional Workroom The Wilshire Swag$27.00 18” - 20” Depth

9256 Professional Workroom The Wilshire Swag$27.00 22” - 24” Depth

These patterns are for upholstered cornices only. Alteration instructions are included.Complete instructions for cornices are now available (See page 21).

CP-17 CP-18 CP-19 CP-20

LP-21 LP-22 LP-23 LP-24

The swag has a shirred seam

in the middle. The horn cov-

ering the seams is attached

separately.

Same as above, but deeper

swag. Different jabots and tail.

Each swag will adjust 32” to 58”

wide. The horn is 26” deep, the

tail is 21” deep, and the jabot

hangs 42”. There is a return for

this jabot if desired. The horn,

tail, and jabot can be altered.

Each swag will adjust 32” to 58”

wide. The horn is 22” deep, the

tail is 18” deep, and the jabot

hangs 42”. The horn, tail, and

jabot can be altered.

www.mfay.com23

Swag A is an empire style,

very easy to make with no

bulk problem. The width

will adapt 14” to 26” and

hangs 22” deep. The spi-

ral tail beside it is separate

and does not offer a return,

it hangs 39”.

Swag D has 5 folds.

The width will adapt

16” to 24”, with the

depth varying from

25” to 24”.

Included in this pattern

are Swag G & H. View

1 is created with swag

pattern G. View 2 is cre-

ated with swag pattern

H. View 3 is created by

mixing G & H patterns.

The swags have 4

folds. The horn is

a part of the swag

(not separate).

Swag widths vary

16” to 22” with

depths 24” to 22

1/2”. The jabot has

no bulk at the top.

It hangs about 78”

deep and offers a

return.

Swag I has a teardrop shape, with one soft

pleat. The width will adapt 10” to 22”, with

the depth varying 24” to 22 1/2”. The tail

is separate and does not offer a return. It

hangs 36” deep. Swag J hangs deep and

thin. The width will vary 8” to 20” and the

depth is 28 1/2” to 27”. Swag K is a flat tri-

angle with a cuff at the top, and optional

ties. The width is 10” to 24”, with the depth

being 25” to 23”. Swag L is a flat triangle.

The width is 10” to 22” with the depth 23” to

21”. Swag M is also enclosed with a width

10” to 18” and depth 18” to 17”.

Swag E has a point-

ed bottom. The

width will adapt

12” to 20”, with the

depth varying 23” to

22”. The jabot has

no bulk at the top. It

hangs 50” deep and

offers a return.

Swag B has 4 folds with

a pointed bottom. The

side horns are a part

of the swag. The width

is 16” to 24”, with the

depth varying from 25”

to 24”. The same pat-

tern can be made with-

out a point to hang 2”

shorter.

Swag C width

will adapt 12” to

16” with a depth

of 20”.

Swag F has a

width 12” to 20”,

with the depth

varying from 21”

to 20”.

Drapery Swags I Professional Workroom 9257 $27.00

Drapery Swags II Professional Workroom 9258 $27.00

Drapery Swags III 9259Professional Workroom $27.00

Drapery Swags IV 9260Professional Workroom $27.00

Swag A

Swag B

No alterations

No alterations

No alterations

No alterations

Swag C

Swag D

View 1View 2

Swag E

Swag F

View 3

Swag G

Swag H

Swag I

Swag L & M

Swag J Swag K

www.mfay.com 24

9261 So Beautiful, Sew Easy Estelle Valance$27.00

9262 Professional Workroom Dust Ruffl e I$27.00 Double Flanged Sham

9263 So Beautiful, Sew Easy Inverted Box Pleat Valance$27.00 Charleston Valance

9264 So Beautiful, Sew Easy Box Pleat Valance$27.00 Sheffi eld Valance

This valance has the simplicity of only two swag pleats, but their

deep angles make the valance look amply full. The construction

is simple and easy. Swag widths extend 14” to 18”. Not includ-

ing trim, the swag depth is 15” to 18”. The horn depth is 12” to

15”. Choose from the gathered return, which hangs the same

depth as the valance, or the jabot depth of 33” to 36”.

No alterations

This dust ruffle has flat areas that are separated

with groups of decorative pleats. Complete in-

structions and patterns will allow you to fit any

size bed and can accommodate a footboard.

This dust ruffle sews to a band of fabric which is

attached to the box springs with hook and loop

tape. The sham is very easy to make. It has a

double flange and is ideal for mixing two fabrics.

This Inverted Box Pleat Valance can be made with or

without jabots. The Charleston Valance has the same

flat sections, but instead of pleats it has the charm and

grace of “pipes”. The flat sections can be as small as

4” or as wide as you need. Everything is adjustable in

depth. Jabot is 40” deep.

This Sheffield valance (left picture) can be made with or without jabots. The jabot is

made separately and hangs 36” deep. Can be altered to about 10” deeper. The Box

Pleated valances can be scalloped or straight. All valance pieces can be any depth.

www.mfay.com25

The flat valance hangs from the rod with rings. It drapes long at one

side with a deep tapered pleat. The other end attaches to the top of

the pole with the softness of three shallow pleats. The separate ro-

sette placed at the top gives the appearance that the valance is tied to

the pole. The short jabot is made and attached separately to the back

of the pole, behind the valance pleats. Valance can be no smaller

than 32” or as wide as you want. Depth is 10” to 30” (from top of pole

at center of valance). Long tapered pleat is twice as deep as valance.

This valance can also be board mounted.

No Drapery Instructions.



pieces are cut separately and then sewn together. This allows

you to use contrasting fabrics, if you like. The seam that joins

them will not show. The swag widths extend 32” to 54”. The

swag depth is 20”. The jabot hangs 46” deep. Bow pattern is

included. The tail is 16” deep.

No alterations

See Page 7 for 18” swag depth.







included. The tail is 14” deep in the middle.

No alterations







included. The tail is 17” deep in the middle.

No alterations

Gathered Fan Swag 20” Swag Depth Professional Workroom 9268 $27.00



Moreland Valance Professional Workroom $27.00 - 10” - 16” Swag Depth - 9265$27.00 - 16” - 22” Swag Depth - 9266$27.00 - 24” - 30” Swag Depth - 9267

www.mfay.com 26

9271 Professional Workroom Squire Pole Swag$27.00

9273 22” Swag Depth Professional Workroom The Versailles Swag$27.00

9274 24” Swag Depth $27.00

9272 20” Swag Depth $27.00

Adapted from the Squire Valance (page 14), this treatment is

pole mounted. The patterns give you a choice between a swag

with three pleats or a swag with only two pleats. You are also

given the alternative of using flat scallop sections instead of

swags. All of the patterns mentioned give a simple depth of 18”

or a Squire depth of 20”. Swag widths extend 14” to 18”. The

short point is 13”. The jabot is 33” deep.

No alterations

The swag is 18” to 30” wide and 22” deep from the top of

the pole.

Jabot is 73” from the holdback down and reaches up an-

other 11” to attach to the same pole as swags. The jabot is

made and attached separately.

The swag is 18” to 30” wide and 24” deep from the top of

the pole.

Jabot is 76 1/2” from the holdback down and reaches up

another 11” to attach to the same pole as swags. The jabot

is made and attached separately.

The swag is 18” to 30” wide and 20” deep from the top of the pole.

Jabot is 54” from the holdback down and reaches up another 11” to

attach to the same pole as swags. The jabot is made and attached

separately.

No alterations.

www.mfay.com27

The triangle tail takes up 9” of board

space x 18” or up to 25” deep. Each

valance section covers 15” to 18” of

width and is 18” deep or can be 15”

deep. Nothing is overlapped. The

pointed side panels are 28” to 36”

wide (before tying) and can be any

depth.

Each swag section covers 15” to 18” of width and is 15” deep. The straight valance section is 12” deep and can be any depth.

The width is 36” to 42” and can be any width. The jabot can be altered to any depth.

The straight valance section is 14” to 18” deep and can be

any depth. The half circle valance section is 18” deep and

15” - 18” wide. Each jabot covers 9” of board “face”. It is 21”

at the shortest side and 57” at the long side. The jabot can

be altered to any depth. The horn hangs 16” to 20”.

Tessa Valance So Beautiful, Sew Easy 9275 $27.00

Charlsey Valance So Beautiful, Sew Easy 9276 $27.00

Jessi Valance So Beautiful, Sew Easy 9277$27.00

Easy to

Make!

Easy to

Make!

Easy to

Make!

www.mfay.com 28

9278 So Beautiful, Sew Easy Tucker Valance$27.00

9279 Professional Workroom Parisian Raised Swag$27.00 18” Depth

9280 Professional Workroom Victory Swag$27.00

The rectangle valance section, as well as the pointed side panel, is made long

enough so it can wrap over the pole. The contrast lining will show at the bottom

portion. The side panel is tied with a decorative rope or tieback. After gathering it

will take up about 4” of rod space. It can be any depth you wish. The rectangle

valance pattern is 12” to 32” wide, but can be any width or depth. The square tail

can hang about 18” or 24”. Nothing is overlapped on the rod.

This French design has delicate scallop

edges. For easy installation, all pieces at-

tach to decorative holdbacks. Each swag

width size is 18” to 30”. Which means you

can fit windows 36” to 60”. The middle hold-

back installs 8” higher than the outside hold-

backs. The center tail hangs 24” deep. The

jabot hangs 38 1/2” deep and offers a return.

Alteration instructions are not included.

This design works well with pattern 9272

(See window 278, page 6).

The design of this valance is a variation of our 9254 Napo-

leon pattern (page 22). It gives a more casual appearance

with less fullness and shorter depths. Swag sizes are 14” to

26” wide x14” to 18” deep. Jabot hangs 27” to 34”.

No alterations

Easy to

Make!

www.mfay.com29

This simple tailored design offers an inverted pleat that can be pointed or straight.

As an alternative choice it can be pulled forward for a different effect. Choose from

a straight top or a scalloped one. Hang it from a pole with rings or tie it to decora-

tive hardware. The valance depth is 16” or 18” and alteration instructions are in-

cluded. The width for the flat sections can be 12” to 26” each for the scallop top, or

as wide as you want for the straight top. The jabot is 34 1/2” deep, no alterations.

Fit windows 36” to 54” wide.

For wider window add pattern

9282 sections. Valance hangs

14” or 16” at shortest, reaches

an additional 5” at center. Ja-

bot hangs 30” deep. Depth

alterations are included for all

the pattern pieces.

Swag depths are 20” and 22”. Swag width is 16” to 28”. No swag

alterations. Gathered horn and jabot can be altered to fit pattern 9001

and 9234. Jabot depth is about 35 1/2”.

For other Empire swag depths, see pages 5 and 16.

Jackson Valance So Beautiful, Sew Easy 9282$27.00

Karmen Valance So Beautiful, Sew Easy 9283$27.00

Classic Empire Professional Workroom 9284$27.00

Easy to

Make!

www.mfay.com 30

9281 Professional Workroom 4-Cut Pillow Collection$27.00

9286 Professional Workroom Overlay Pillow Collection$27.00

9285 Professional Workroom Ondule’ Mount Board$27.00

The fronts of these pillows are

cut into four sections, allowing

numerous possibilities for design,

from a simple stripe fabric or use

multiple fabrics. Sizes 12” to 26”

square.

Includes pattern and instructions to make 4” upholstered mount

board. Use it as your mount board for swags, valances, cur-

tains, etc. Bendable plywood is required in making the Ondule’

Mount Board.

These are basic square pillows. The fronts have separate over-

lays that are stitched into the outside seams of the pillows. The

cut-outs of these overlays allow the fabric on the basic pillow

to show through. Views A, B, and C have a flat surface, while

views D and E have the addition of pleats at the center (giving a

three dimensional effect). View F is the same as views A, B, or

C, except the tips of the overlay are flipped back and tacked in

place. View G has the side overlays left free at the center. This

allows them to spread like wings.

A B C D

A

C E

G

BD F

Window 321Mount Board – Ondule’, Bay Window.Valance - 9282 Jackson Valance pattern is used, with pointed pleat.Jabots – 9284 Classic Empire Valance pattern is used, attached separately

9006 pattern is used for the swags.

www.mfay.com31

Moroccan Valance So Beautiful, Sew Easy 9289$27.00

Goblet Pleated Side

Panel Instructions are

also included!

Euro Side Panel

Instructions are

also included!

An English Tudor Swag is a drapery swag with gathered sides.

There is a lot of fullness with no bulk at the top. Swag width is

18” to 24” with a depth of 30”. The jabot hangs about 92” deep.

It has a return. It also, has no bulk at the top. The English Tail

is 37” at the deepest point. Depth alteration instructions are in-

cluded for the swag and tail only.

This English Tudor Swag has a Piccadilly jabot that hangs 80”

deep. An English Tudor Swag is a drapery swag with gathered

sides. There is a lot of fullness with no bulk at the top. The gath-

ers are created with a one cord shirr tape. It can be dressed to

look casual, or it can dress to look pleated and formal. Swag

width is 18” to 24” with a depth of 36”. Depth alteration instruc-

tions are included for the swag only.

There are a variety of width sizes for the valance sec-

tions. There is also a 6” wide accent piece that is option-

al to use between the valance sections. Also included,

is a decorative tail piece that is optional to use at each

end. Alteration instructions are included to make the va-

lance any depth.

The Piccadilly 9288Professional Workroom $27.00

English Tudor Swag 9287Professional Workroom $27.00

Easy to

Make!

www.mfay.com 32

9290 So Beautiful, Sew Easy Oxford Valance$27.00

9291 So Beautiful, Sew Easy Milan Valance$27.00

9292 Professional Workroom Baroque Valance$27.00

This simple tailored design is easy to make. The center section can be repeated, as many as necessary. The side sections

drop down 8”. A horn is sewn between all sections. The jabot is made and attached separately.

All valance sections can be 12” or up to 22” wide. The jabot hangs 29” deep. All pattern pieces can be altered in depth.

This soft valance is made of two separate parts. The optional underlay

is also separate. The underlay can attach behind, at the center of the

valance where the two pieces meet.

The pattern will fit windows 48” to 68” wide. The valance has a 9” short

point. Using the underlay, it has a 14” short point. The tapered sides

hang about 49” deep.

This valance has a center straight section with a pointed

section at each side, followed by an end section at each

side, and then a jabot (or an alternative simple return). If

you choose, you can repeat as many center straight sec-

tions and pointed sections, as you wish.

The center straight section can be 8” wide or as wide as

you want. The pointed section finishes 5 1/2” wide (between

pleats). The end section finishes 8” wide. As is, the va-

lance is 21 1/2” deep with a short point of 18”. The jabot is

35” deep. The depth of the valance can be altered, but all

pieces have to be altered to fit each other.

www.mfay.com33

Window #310 Professional Workroom 9293$27.00

Sophia Valance So Beautiful, Sew Easy 9294$27.00

Brooklyn Valance So Beautiful, Sew Easy 9295$27.00

Window #310 is a popular design from the “M’Fay Designer’s Digest”. These designs

were created by mixing various patterns, and/or by changing an existing pattern. The

valance design is actually two valances made the same depth, installed on separate

boards. The top valance is installed 3” higher than the one underneath. The top valance

also has a projection 1 1/2” deeper. This gives depth between the two valances. This is

a soft, flat valance with pleats that “kick out” at the corners. The center of the board juts

outward 4”, displaying the majestic valance beautifully. The board pattern and instruc-

tions are also included. The valance, as is, has a 20” deep point and 12” short point,

and can be altered for any depth. There are complete instructions for a Straight Roman

Shade. Instructions for the shade feature the Sure Shades™ lift system with roller tube

and lift bands by www.rowleycompany.com.

*Revised 2010

This soft valance consists of a center section, two horns, and two side

sections. All pieces sew together to create one valance before attaching

to the mount board. The valance depth is 18” at the center. The horn is

12 1/2” at the shortest point. The valance sides are about 49 1/2” deep.

Depth alterations are included, but all pieces must alter the same amount.

The pattern will fit windows 56” to 66” or wider. It is not recommended for

more narrow windows. The wide sides would close it up too much, and

the center scallop section would have to be too small in scale. The center

section can be 14” to 24” wide. You can alter it to be wider, or you can use

more than one, with horns in between. The side section finishes 21” wide

(per side) on front of the board.

There are a variety of width sizes for the valance sections. There is also a 6” wide accent piece that is optional to use between

the valance sections. Also included, is a decorative tail piece that is optional to use at each end. Each valance sections is made

as a flat piece (contrast lined). When placed over a pole, the back of the valance can hang 19” or up to 21” deep at the deepest

point. Alteration instructions are included to make the valance any depth.

www.mfay.com 34

9296 So Beautiful, Sew Easy Summerhouse Valance$27.00

9297 Professional Workroom Oxford Arched Valance$27.00 65” to 75” wide

9298 So Beautiful, Sew Easy Bombay Arched Valance$27.00 46” to 54” wide

This valance has a center section with a side section,

horn, and jabot on each side (or an alternative simple

return). The finished valance is attached to 5 decora-

tive holdbacks. If you choose, you can repeat as many

center sections as you wish, there is an additional

center pleat pattern to sew between them. The center

section comes in sizes 18”, 22”, 26”, and 30”. Instruc-

tions to alter the width of the center section patterns

are given. The side section comes in sizes 9” and 12”.

The depth of the valance can be altered, but all pieces

have to be altered to fit each other.

Alteration instructions are included to make the valance

section wider, and deeper. You cannot take away or

add additional sections. You can alter to fit other arch

sizes, but we don’t recommend going smaller than 54”

wide, because the flat sections would have to be too

small to be attractive. Alterations could be considered

difficult for inexperienced people. The jabot pattern is made and attached separately. It has no return.

There is a return on the valance. For installation 6

holdbacks are needed. The valance will tie (or use an

elastic loop) to the holdbacks.

The valance consists of three separate flat sections. Each sec-

tion has an optional cuff that is sewn to the top and flips over

to expose the contrast lining. The decorative tails are also op-

tional. The decorative tails hang about 19” and 24” deep. They

have no return. For installation, 4 holdbacks are needed. The

valance will tie (or use an elastic loop) to the holdbacks. It is

not recommended that you use this pattern for sizes smaller

than 46” because the side sections will hang at an inappropri-

ate angle. You cannot add or take away sections on the arched

window.

(Measuring straight across half circle at widest place)


The center section and deco-

rative tails can also be used

together for straight windows.

No alterations.

www.mfay.com35



Carolina Valance So Beautiful, Sew Easy 9299$27.00

Kingston Arched Valance Professional Workroom 9300 52” to 62” wide $27.00

Kingston Arched Valance Professional Workroom 9301 66” to 76” wide $27.00

This valance consists of flat sections that can be 12” to 22” wide

x 18” deep. The Euro pleat between them has 5 folds at the top,

and 4 bottom shapes to pick from. The returns create a jabot

effect, 23” deep. All the patterns pieces can be altered in depth.

This valance can hang from holdbacks, or a pole with rings. It

can attach with ribbon or pin hooks. Instructions to decoupage

the finials are included.

This valance is gathered, using shirr tape, at the seam

behind the horn. Instructions are included to alter the

droop area and/or the fullness in the swags. There are no instructions for alterations to fi t window sizes other than those stated.

For installation 4 holdbacks are needed. The valance

can attach with ties, or use elastic loops.

This valance is gathered, using shirr tape, at the seam

behind the horn. Instructions are included to alter the

droop area and/or the fullness in the swags. There are no instructions for alterations to fi t window sizes other than those stated.

For installation 4 holdbacks are needed. The valance

can attach with ties, or use elastic loops.

A CB D

www.mfay.com 36

9302 Professional Workroom Florentine Arched Valance$27.00 53” to 76” wide

This arched valance is made of two separate sections.

There is an underlay that is attached behind the va-

lance where the two sections meet. The valance has

no returns. For installation, 5 holdbacks are needed.

Instructions are included for a micro cord stitched into

the outside seam. Braid or gimp is optional and can be

applied near the outside edge. Alterations instructions

are not included.

So Beautiful, Sew Easy

Each package includes the same jabot, which has a

depth of about 32”, 36”, or 40”. Jabot depth altera-

tion instructions are included. Swag fullness and droop

area can be altered. No swag width or depth altera-tions. All pieces are cut separately and sewn together.

Pleat or gather at seam areas. Dress to look formal or

casual.

Maltese Cross Rosette pattern included, sizes 4”, 6”,

and 8”.

So Beautiful, Sew Easy

Each package includes the same jabot, which has a

depth of about 37”, 42”, or 46”. Jabot depth altera-

tion instructions are included. Swag fullness and droop

area can be altered. No swag width or depth altera-tions. All pieces are cut separately and sewn together.

Pleat or gather at seam areas. Dress to look formal or

casual.

Maltese Cross Rosette pattern included, sizes 4”, 6”,

and 8”.


$27.00 9303 - Swag width 24” to 32” Medallion Swag$27.00 9304 - Swag width 34” to 42” 14”, 16”, or 18” Depth

$27.00 9305 - Swag width 44” to 54”

$27.00 9306 - Swag width 24” to 32” Medallion Swag$27.00 9307 - Swag width 34” to 42” 20”, 22”, or 24” Depth $27.00 9308 - Swag width 44” to 54”

www.mfay.com37

Shaped Tiebacks Professional Workroom 9309 $27.00

Bistro Swags & Valance So Beautiful, Sew Easy 9310Flip Box Pleat Side Panels $27.00

Elegant Swags So Beautiful, Sew Easy 9311Convertible Box Pleat Side Panels $27.00

Each Tieback shape has a pattern for 18”, 24”, and 30”. Al-

teration instructions are not included. Three different types of

construction are given. Tiebacks can range from soft to ex-

tremely stiff, depending on the type of interfacing and construc-

tion used.

This swag is easy to make and offers a variety of design op-

tions. The Bistro Drapery Swag has a deep droop area and

is designed to hang in front of a drapery. It can be attached

directly to the drapery, or it can attach to the same pole using

it’s own rings. The swag has widths 16” to 30” and hangs 24”

deep. The Bistro Valance Swag has a shorter droop area and

is not designed to hang in front of a drapery. It is designed to

hang from medallions or a pole as a valance. The swag has

widths 12” to 18” and hangs 17” deep. All swags have the

option of a cuff. There are two tail patterns included. The 24”

deep tail is to be used with the Bistro Drapery Swags and the

15 1/2” deep tail is to be used with the Bistro Valance Swags.

Alteration instructions are included.

This swag is designed to be placed in front

of a drapery. It can actually be attached to

the drapery or it can hang to the same rod

with its own rings. The bottom center of the

swag has the option of a curve or a point.

The swag comes in sizes 14” to 30” wide

and has a depth varying from 23 1/2” to 25”.

With the point, depth will be 2 1/2” deeper.

The swag sides are cut to have a “tail” ef-

fect. The tails hang 29” deep. The entire

swag is cut as one piece. Any necessary

seams will not be hidden.

Alterations instructions are included.

www.mfay.com 38

9312 So Beautiful, Sew Easy Pashmina Valance$27.00

9313 So Beautiful, Sew Easy Nightingale Valance$27.00

9314 Professional Workroom Liberty Header$27.00

This versatile valance is a simple rectangle of fabric that has a shape cut at the bottom and at each end. You will be shown how to

add pleats and/or excess fullness to create numerous styles. Choose from four different shapes for the center. The depth of the

center varies according to the shape. Center A finishes 18” deep. Center B and C finish 19” deep. Center D finishes 16” in the

center short area.

This valance can have a smooth bottom edge or a dainty scallop edge. It has flat sections that can be 12” to 22” wide by

18” deep. The tulip style pleat is placed between the flat sections. The jabot hangs 23” deep. All pattern pieces can be

altered in depth.

The valance can hang from medallions, or a pole with rings. It can attach to medallions with ribbon or loops.

This beautiful header can be used at the top of drapery

panels or valances. It offers returns (if needed) but no cen-

ter overlap. It should be used for side panels, as opposed

to traversing panels. The top is a separate border that is

placed behind the drapery and increases the depth of the

drapery by 1”. The two layers are made separately and

then placed one on top of the other. Various type pleats

can be used. The pleats shown are the inverted pleat, can-

dlestick pleat, box pleat and the mini French pleat. When

desired, you can eliminate the top border. The finished top

would be the scallops.

www.mfay.com39

Shawl Valance So Beautiful, Sew Easy 9315 $27.00

Antoinette Valance Professional Workroom 9319 $27.00

A Shawl valance is a long rectangle of fabric draped

across a mount board. When the fabric drops off the

board ends, a jabot or tail effect develops. Choose

from four different shapes for the center. The valance

depth varies according to the center shape. Center A

finishes 16” deep. Center B finishes 18” deep. Center

C finishes 14” deep and Center D finishes 18” deep.

The valance tail will finish about 28” deep. Alteration

instructions are included.

The swags are made separately from the horns, tails, and jabots, with or without the scallop cuffs. Instructions for fabric bow

medallions are included. The center swag is raised 6” above the side swags. The side swags can be repeated (with no center

raised swag) and installed on a pole with rings. The center swag has widths 20” to 30” and hangs 24” deep. The side swag has

widths 12” to 18” and hangs 23” deep. The tail hangs between the swags and is 18” deep. The jabot is about 26” deep and has

a return. All pattern pieces can be altered in depth. No width alterations. This pattern is easy to understand, but good sewing

skills are required due to the intricate shapes and tiny pleats.

This balloon shade can have contrast

pleats and the option of sewing cording

in the pleat seams. It is recommended

that shades 44” or smaller have one

center section. For larger shades, mul-

tiple center sections are recommended.

Flat areas should be 16” to 29” wide,

tails should be 4” to 8” wide. These

shades install on a mount board.

*Revised 2010

London Shades 9316Professional Workroom $27.00

www.mfay.com 40

9317 Professional Workroom Stationary Split Roman Shade$27.00

9318 Professional Workroom Operational Split Roman Shade$27.00

9320 Professional Workroom Tuscany Curtain$27.00

This roman shade has inverted pleats with contrast fabric. It is

made with 2 permanent folds at the bottom and is kept station-

ary. These shades install on a mount board and can have sepa-

rate returns (patterns included). This package does not give in-

structions for lifting the shade up and down. Those instructions

are in pattern 9318.

Flat sections are usually equal in size, but do not have to be.

Flat sections must be at least 4” wide.

*Revised 2010

This operational roman shade has inverted pleats with con-

trast fabric. These shades can have separate returns (pat-

terns are included). They can be made to be decorative,

with a button and the contrast fabric showing.

Flat sections are usually equal in size, but do not have to

be. Flat sections must be at least 4” wide.

Encased lift cord tape is used featuring the EZ-Rig™ lift

system by www.rowleycompany.com

*Revised 2010

This curtain is created with Italian Stringing. An encased lift cord tape

is used to draw the fabric up and sideways at the same time, creating

swag like folds and a graceful tail. It can be board or pole mounted, with

staples or Vel-cro®. There is a small pleat at each end which allows

some “ease”. There is no other fullness across the top edge. You can

have a return at one (or both) sides. Width sizes are 20” to 42”. For

wider windows, a pair can be used on the same mount board, or pole,

mirror imaging one another.

This treatment pulls up and is tied off to be stationary.

*Revised 2010

www.mfay.com41

Single Piece Construction Professional Workroom 9321HB-1 and 2 $27.00

Hollow Back Construction Professional Workroom 9322HB-3 $27.00

Solid Back Construction Professional Workroom 9323HB-4 $27.00

Instructions to build and upholster the

board. Actual patterns for plywood. Sizes

are Twin, Full, Queen, California King, and

Dual King.

These headboards use a single layer of

plywood.

Instructions to build and up-

holster the board. Actual

patterns for plywood and for

the foam. Sizes are Twin,

Full, Queen, California King,

and Dual King. These head-

boards have additional lum-

ber around all outside edges.

Instructions to build and

upholster the board. Ac-

tual patterns for plywood

and for the foam. Sizes

are Twin, Full, Queen,

California King, and Dual

King. These headboards

have additional lumber

around all outside edges

and another layer of lum-

ber completely covering

the back.

This is a pattern and instructions to build a “swivel” type plat-

form that will help with moveability when upholstering head-

boards.

This package includes - Pattern 9321

- Pattern 9322

- Pattern 9323

- Pattern 9324

Plus - Additional information that will explain the difference in

the three types of construction. Also additional information

about measuring, foam, batting, etc.

Headboard Carousel 9324Professional Workroom $27.00

Headboards Package 932123Professional Workroom $88.00

Save $20.00

HB-2

HB-1

HB-3

HB-3

HB-4HB-4

Tall

Short

www.mfay.com 42

This soft valance consists of two separate valance sections that butt together at the center of the window. You have a choice be-

tween two tails. The Rosewood Tail can place over the valance sections. The Curved Tail can place behind the valance sections.

The Rosewood Tail is 17” at the deepest part. The Curved Tail is 12” at the shortest part. The pattern fits windows 36” to 56” wide.

Alterations for the depth of the valance and tails are included.

9325 Professional Workroom Rosewood Valance$27.00

9326 Professional Workroom Cowl Swag I$27.00

9327 Professional Workroom Bentley Swags$27.00

This cowl swag is cut in two pieces. This allows the top to have

fullness while the bottom remains flat. The seam is hidden.

When desired, ruffles or other trims could be added in the hid-

den seam. This finished swag can be 16” or up to 24” wide.

The bottom flat portion can be altered in depth. There are no

width alterations. No alterations for the cowl top.

Curtain instructions are included.

The swag has widths of 16” to 24” and hangs 30” deep.

The curtain has a pocket for a 2 1/4” pole. Other poles or rods

that can be inserted into a pocket can be used instead. The

header extends 6” above the pole and tapers down to 2”.

Rosette

7” x 7”

www.mfay.com43

This asymmetrical valance consist of a valance section, horn,

and long jabot that are sewn together before attaching to the

mount board. A short jabot is made separately. It attaches to

the board underneath the valance.

Mandolin Valance Professional Workroom 9328 $27.00

The Prescott Professional Workroom 9329 $27.00

The Yorkshire Professional Workroom 9330 $27.00

30”-54”

22”

3”

38”26”

21”Alteration instructions

are included.

Alteration instructions are

for jabot and tail, swag al-

terations are not included.

Jabot should overlap swag.

Tail can place over or under

swags.

Alteration instructions are for

jabot and tail, swag altera-

tions are not included.

5” 4”9”

5”

Swag15”- 30” x 15” deep

10”

11”27”

23”

18”

Swag can overlapjabot 4”. Leave atleast 2” of tailexposed betweenswags at board line.

The new Prescott jabot and tail is combined with Basic Pleated

Swags 15” to 30” wide x 15” deep. Both the jabot and tail have

a “cut out” effect that shows the contrast lining.

The new Yorkshire jabot and tail is combined with Basic Pleated

Swags 15” to 30” wide x 18” deep.

Swag15” - 30”x 18” deep

6”4”

13”

10”42”

18”

Jabot can overlap swag 3” or up to 6”.Leave about 2” of tailexposed betweenswags at board line.

www.mfay.com 44

9331 So Beautiful, Sew Easy Monroe Valance$27.00

9332 Professional Workroom Beckham Valance$27.00

9333 Professional Workroom Chloebelle Valance$27.00

AccentPiece

Tail

There are a variety of width sizes for the valance sections. There is also a 6” wide accent piece that is optional to use between the

valance sections. Also included, is a decorative tail piece that is optional to use at each end. Each valance section is made as a

flat piece (contrast lined). When placed over a pole, the back of the valance can hang 19” or up to 21” deep at the deepest point.

How deep the valance hangs will affect how much contrast lining is showing.

The 6” accent piece finishes at 50” deep. This allows it to hang 28” in back and 22” in front. This piece can be altered to any depth.

Alteration instructions are included to make all pieces any depth.

The center section can be repeated, as many times as necessary. The side

sections drop down 8”. A pleat is sewn between all sections. The jabot is made

and attached separately.

This design is the same as Window #357 in the M’Fay Designer’s Digest.

All valance sections can be 12” or up to 22” wide. THe jabot hangs 29” deep.

All pattern pieces can be altered in depth.

This design is the same as Window #223 in the M’Fay Designer’s

Digest.

This design is constructed by sewing the swag sections together.

Separate tails are placed over the seams. Separate jabots overlap

the swags and cover the mount board ends. A rosette pattern is

included. Rosettes can be placed on top of the tails.

Each swag section can be 15” or up to 24” wide. The swag depth

can be 16” or up to 18” deep. Swag alterations are not included.

The tail is 16” deep and 4” wide at the board line. The jabot hangs

about 38” deep and is 4 1/2” wide at the board line. Alterations

(for depth of jabot) are included but can be difficult.

www.mfay.com45

Each valance section is made as a flat piece (contrast lined). When placed over the pole, the back of the valance can hang 18”

or up to 20” deep at the deepest point. The deeper the back of the valance hangs, the shorter the front of the valance will be and

more contrast lining will show. The valance sections range from 14” to 22” wide. Alteration instructions are included. A tail can be

placed at each end of the valance sections. The tail is 5” wide and about 24” deep from the top of the pole. It does not have a return.

Harley Valance So Beautiful, Sew Easy 9334 $27.00

Board Mount Embellishments Professional Workroom 9336 $27.00

Waterford Valance Professional Workroom 9335 $27.00

14” - 22”

7”

18”24”

5”

None of the sections overlap.

12”21”

Middlepleat

Jabot(no return)

36”

6”

Valancewith return

This valance is made and attached to the mount board separately from

the jabots. The valance has returns, the jabot does not.

The valance width can be 36” or

up to 60” wide. 1” of the middle

(contrast) pleat is exposed. The

middle pleat will sew into the

valance and become part of it.

The jabot is 6” wide at the board

line x 36” deep.

Alterations instructions for the

depth of the valance and jabot are

included.

View A

Wide Pointed Tail

View B

Scallop Horn

View C

Closed Horn

View D

Point Underlay

Military Bow Rosette

View E

Diamond Tail

These items can be used to embellish other

treatments. They can place over, under, or

betweenvalance or swag sections. All items

can alter in depth. See yardage page for more

details.

www.mfay.com 46

This is a flat shaped valance. The center horn and the jabots are

made and attached separately. For easy installation, all pieces

tie to decorative medallions. The valance width measurement

should be taken straight across. That is the measurement to use

on the pattern. This valance is 14 1/2” deep at the center (from

the top point). The Hayworth Horn is 18” deep. The Hayworth

Jabot is about 36” deep. Alteration instructions are not included.















9337 Professional Workroom Hawthorne Valance$27.00 33” to 46” wide

9338 Professional Workroom Hawthorne Valance$27.00 47” to 54” wide

9339 Professional Workroom Medallion Mount Embellishments$27.00

View A

Jabot

View B

Side Flounce

View C

Center

Flounce

View D

Horn Underlay

View E

Flip Pleat

These items can be used to embellish

other treatments. They can place over,

under, or between valance or swag

sections. All items can alter in depth.

www.mfay.com47

Our “Trendy Treatments” are a group of patterns designed for those with limited experience sewing home

decor items. It is required that you have good sewing skills. You should feel confident and comfortable

at the sewing machine.

Instructional DVD Included!

“La Bella Principessa” (the beautiful princess) describes this va-

lance. The scallop sections can be 12” to 20” wide by 16” deep.

Use as many (or as few) as your window will need. The pleats

have five folds at the top and hang 15” deep). The jabot hangs

about 36” deep and sews to the valance. Alterations for the va-

lance and jabot depth are included.

A choice of three different valance designs, using inverted

pleats. Depth alterations will need to be done straight across at

the top. No other alterations are given. Fabric Suggestions: Use

light to medium weight fabrics that are not too stiff. Add interlin-

ing to light weight fabrics. Stripes and plaids work well. Pleats

are made from a contrast fabric, they should be self lined (some

areas will show). View A side section should be self or contrast

lined. Drapery lining can be used for the center section. How-

ever, lining may tend to show at the bottom edge if a trim or cord

is not used.

La Bella Valance 2000$27.00

Concord Valance So Beautiful, Sew Easy 9340 $27.00

View A

View B

View C

20” - 30” 9”

18” 15” 27”

www.mfay.com 48

The pattern gives you width

sizes of 20” to 36”. The swag

hangs 18” deep and has a

droop area of 4” to 5”. It can

be altered in depth and width.

When increasing the width of

the pattern, seams may have

to be added.




Each item is made and attached to the board separately. Each piece will

overlap each other 2”. The jabot finishes 9” wide (on the “face” of the

mount board) x 42” deep. The side section will lay 2” behind it. Each

side section can be 12” or up to 20” wide x 20” deep. The scallop section

can be 12” or up to 20” wide x 16” deep.

This simple, elegant valance has a scant amount of fullness in the swag areas. The valance “kicks out” where it attaches to the

medallion, forming a “horn” effect. The tail is cut on a curve and hangs very full. The width of the swag areas can be most anything

you want. The valance finishes about 16” deep. The valance tail will finish about 28” deep. Alteration instructions are included for

the valance depth.

The center section can be 14” wide or up to 24” wide. Your choice for the side sections is 7”, 9”, or 12” wide. Depth of valance

is 16” at center, 19” at side. The jabot is 36” deep. Alteration instructions are included.

Sterling Valance 2004$26.00

Martinique Valance 2003$26.00

Cambridge Valance 2002$26.00

Austin Swag 2001$26.00


www.mfay.com49

This book includes all of our pattern cover sheets through #9327 (with

yardage pages). It also includes swag charts, a visual index of the

cover sheets, and the “Trendy Treatments” cover sheets!

This book contains over 600 special designs that can be created by mix-

ing various patterns and/or by following instructions offered in the “Work-

room Manual”. The “special instructions” are not included in Part 2.

This book contains Part 3 through Part 7. It is filled with basic instruc-

tional help needed by the workroom. It also contains the “special in-

structions” mentioned in Part 2. Visit our web site to view the contents

page.

Part 1 BinderThis book includes all of our pattern cover sheets through #9327 (with yard-

age pages). It also includes swag charts, a visual index of the cover sheets,

and the “Trendy Treatments” cover sheets!

Part 2 BinderThis book contains over 600 special designs that can be created by mixing

various patterns and/or by following instructions offered in the “Workroom

Manual”. The “special instructions” are not included in Part 2.

Workroom Manual BinderThis book contains Part 3 through Part 7. It is filled with basic instructional

help needed by the workroom. It also contains the “special instructions” men-

tioned in Part 2. Visit our web site to view the contents.

Designer’s Digest Part 1 7004$99.95

Designer’s Digest Part 2 7005$99.95

Workroom Manual 7006$99.95

Designer’s Digest & Workroom Manual 7001-10$279.95

NOW IN 2 EASYPAYMENTS!




www.mfay.com 50

S1 NOW Supplement 1$34.95 $17.48 Designer’s Digest & Workroom Manual



Window 166

Window 147Window 167

Window 139

Featuring

- The latest cover sheets

with yardage

- 40 New designs

- Detailed cornice instructions

- Additional workroom help

This supplement is designed to be integrated into

the original Designer’s Digest and Workroom Man-

ual and will not be complete when used alone.

Featuring


with yardage

- 40 New designs

- An additional Binder

- Sunburst Curtains




ual after Supplement 1 and will not be complete

when used alone.

Featuring


with yardage

- 26 New designs

- Part 7 has been added to

include bedding instructions

- Extensive information about

interlining and fabric bulk




ual after Supplement 1 and 2 and will not be com-

plete when used alone.

Window 195

Window 191

Window 219

Window 235

Bedding 241

Window 178

Window 176

Window 228

Canopy 239

Canopy 172

Window 175

www.mfay.com51

Supplement 4 NOW S4Designer’s Digest & Workroom Manual $17.48 $34.95

Supplement 5 NOW S5Designer’s Digest & Workroom Manual $17.48 $34.95

Supplement 6 S6Designer’s Digest & Workroom Manual $49.95

Window 257

Window 250

Window 287

Window 310

Window 307

Window 249

Featuring


with yardage

- 46 New designs

- How to make gathered swag

patterns (including arches)

- Italian Stringing




ual after Supplement 1, 2, and 3 and will not be

complete when used alone.

Featuring


with yardage

- 52 New designs

- Index has been added

- Miscellaneous Chapter

- Ondule’ Mount Board

- Drapery Banding




ual after Supplement 1 through 4 and will not be


Featuring


with yardage

- 45 New designs

- Two new binders

- Design CD

- Ruched-top curtain instructions

- Dressing Window Treatments


This supplement is designed to be inte-

grated into the original Designer’s Digest

and Workroom Manual after Supplement

1 through 5 and will not be complete when

used alone.

Window 262

Window 245

Window 268

Window 290

Window 297

Window 299

Window 312

Window 357

Bedding 367

Window 323

Window 326

Window 341

www.mfay.com 52

S7 Supplement 7$49.95 Designer’s Digest & Workroom Manual



Featuring


with yardage

- 45 New designs

- 8 new drapery pleat styles

- A chapter on tiebacks

- Visual index of cover sheets

- A cross reference guide

- Updated CD






used alone.

Featuring


with yardage

- 66 New designs

- A chapter on point to point swags

- Low bulk drapery instructions

- Binder #3

- Updated CD






used alone.

Featuring


with yardage

- 57 New designs

- Tufting instructions

- Stagecoach valance/shades

- Chapter about headboards

- Updated CD






used alone.

Window 409

Window 382

Raised Tulip Pleat

Window 411

Window 401

Window 421

Window 424

Window 487


Bedding 526

Window 440


Window 497

www.mfay.com53

PC-1 Portfolio Collection$199.95For many years, designers have asked that we provide a book that gives them all

of the same designs and cover sheets that are in our popular “Designer’s Digest &

Workroom Manual”, but without the workroom instructions.

This collection contains 575 pages, with over 550 designs. A CD is also included.

PART 1 contains photographs or sketches of every pattern package offered by

M’Fay Patterns at the time this book went to press. Complete yardage requirements

are on the back of these pages. The three ring notebook will enable you to remove

pages as needed, to show your client or to have convenient at your desk.

The design sketches in PART 2 may be achieved by mixing various patterns to-

gether. Some of the designs don’t need patterns. Information on the back of these

pages will direct you as to which patterns (if any) are involved. In many cases it

gives information the designer needs to know. When the words “Special instructions

apply”, those instructions are more detailed and are found in the “Designer’s Digest

and Workroom Manual”.

PART 3 is general information that may help the designer to plan, measure, and communicate with the workroom.

Additions will be published every 18 to 24 months, which will include the latest window treatment designs as well as more

PART 3 information. Future additions are not included in the price of this book.

A1 Addition 1$34.95 Portfolio CollectionFeaturing


with yardage

- 45 New designs

- 8 new drapery pleat styles

- A chapter on tiebacks

- Visual index of cover sheets

- Updated CD


Window 411

As with the original book, each design directs you to the patterns

used to create them.

This addition is designed to be integrated into the original Portfolio

Collection and will not be complete when used alone.

S10 Supplement 10 $49.95 Designer’s Digest & Workroom Manual


Window 568

Window 571

Bedding 600Window 551

Featuring

- The latest color

cover sheets

with yardage

- 73 New designs

- Shower Curtains

- Grommet Panels

- Scaldini

- Updated CD

This supplement is designed

to be integrated into the

original Designer’s Digest

and Workoom Manual after

Supplement 1 through 9 have

been entered and will not be


www.mfay.com 54

- The latest color cover

sheets

- 57 New designs

- Headboard

- Tufting

- Stagecoach valance shades

- Updated CD

This addition is designed to be integrated into

the original Portfolio after Addition 1 and 2 has

been entered and will not be complete when used

alone.

A3 Addition 3$34.95 Portfolio Collection


$2.50 Laminated Cover PagesEach

Window 513

Window 488

Window 490

Window 510

Window 497

This is a great sales tool for drapery work-

rooms and designers.

Yardage requirements are listed on the back

of each coverpage.

Each page is laminated for durability.

Check these pages out on our web site.


Featuring


with yardage

- 66 New designs

- A chapter on Point to Pont Swags

- Updated CD

As with the original book, each design directs you to the patterns used to

create them.

This addition is designed to be integrated into the original Portfolio Col-

lection after Addition 1 has been entered and will not be complete when

used alone.

Window 424

Window 464


Window 440

Window 545

Window 584

Window 546

Window 568

Window

571

- The latest color

cover

sheets with

yardage

- 73 New designs

- Shower Curtains

- Grommet Panels

- Scaldini

- Updated CD

This addition is designed to

be integrated into the origi-

nal Portfolio after Addition 1

through 3 has been entered

and will not be complete

when used alone.

www.mfay.com55

8003 Instructions to make a $7.00 Workroom Helper

This handy helper will hold your poles and boards firm and

steady while you are free to staple and dress. Made from light

weight, but strong pvc pipe. Folds flat for easy storage. Will

support boards or poles up to 7’ wide. Use 2 units for larger

sizes. Very easy to make.

8002 Workroom Valet$250.00

Designed & Manufactured

Exclusively for the Drapery

Workroom!

- Steel Plate with Built in Clamps

- Holds Boards & Pole Treatments

- Unique cut out for Roman Shades

- Adjustable Height 44” to 78”

- Perfect for Installations

FedEx Ground Shipping $20.00

4002........................................................Arch Curtain & Drapery ............................................................ (9 pages)4003........................................................Cornice Boards ....................................................................... (28 pages)4004........................................................Pleated Draperies .................................................................... (45 pages)4005........................................................Sunburst Curtains ..................................................................... (8 pages)4006........................................................Bed Canopies .......................................................................... (17 pages)4007........................................................Panel with Attached Valances ................................................ (16 pages)4008........................................................Comforters and Duvets .......................................................... (15 pages)4009........................................................Pillow Shams ........................................................................... (34 pages)4010........................................................Bedspreads and Coverlets ..................................................... (28 pages)4011........................................................Dust Ruffl es ............................................................................. (10 pages)4012........................................................Tulip Panel ............................................................................... (10 pages)4013........................................................Point to Point Swags ............................................................... (14 pages)4014........................................................Stagecoach Valance/Shade ...................................................... (8 pages)4015........................................................Headboards and Cornice Tufting ........................................... (20 pages)4016........................................................Ruched Top Curtains .............................................................. (14 pages)4017........................................................Shower Curtains ...................................................................... (14 pages)4018........................................................Grommet Panels ........................................................................ (8 pages)

Instructional HelpThe following chapters were taken from our Workroom Manual and can be purchased sepa-

rately.

No patterns come with the chapters.

Chapters$20.00 each

Fit-Like-A-Glove Slipcovers with

Jeanelle Dech Instructional DVD

- Learn to create fabulous form-fit

slipcovers with this new instruc-

tional video. Follow along (at your

own pace) as veteran instruc-

tor Jeanelle Dech creates a wing

chair slipcover from start to finish.

Features: Easy to navigate chap-

ters for each step - Helpful tips and

tricks-of-the-trade - Friendly and

energetic teaching style.

M’Fay takes you through a step by step

process for making this popular treat-

ment. In this easy to follow DVD, M’Fay

will explain all the aspects of this treat-

ment from start to finish.

Including:

- A new alternative jabot.

- Two new alternative horns added (in-

cluded with DVD only).

- How to alter fullness area.

- How to alter depth of valance.

*This instructional DVD is to be used in conjunction with the revised 2007 Kingston #9101 pattern. *#9203 Kingston

Pole Swag instructions are not included on this DVD.

DVD-2 Slipcovers$94.95

9101V Kingston Valance DVD$34.95

www.mfay.com 56

CHECK OUR WEB SITE FOR CURRENT PRICES

Order Form - 4 Ways To OrderFAX

7 DAYS A WEEK24 HOURS A DAY

704-795-0192

INTERNETwww.mfay.com

PHONE MONDAY-FRIDAY9:00 - 4:00 EST. 704-795-9888

DISCOUNTS10 PATTERNS & UP - FREE SHIPPING

15 - 25 PATTERNS - 10% OFF26 - 35 PATTERNS - 20% OFF

OVER 35 PATTERNS - 25% OFFDISCOUNTS APPLY ONLY TO SINGLE

TRANSACTIONS.

SHIPPING & HANDLINGCall for Shipping Rates

WORKROOM VALET $15.00NC RESIDENTS ADD 8.25% TAX

*Call for Shipping ChargesOutside U.S.A.

PRICES SUBJECT TO CHANGE WITHOUT NOTICE. FOR CURRENT PRICES, CHECK OUR WEB SITE.

MAILM’FAY PATTERNS

4441 Motorsports DriveUnit 40

Concord, NC 28027

Ship To:

Address:

City:

Phone: email:

State: Zip:

Method of Payment: Check or Money Order Payabel to M’Fay Patterns

Return Policy: All products returned are subject to a 20% restocking fee. Shipping charges are non-refundable. Products

must be returned within 45 days of purchase. All Books, Manuals, Supplements, and Software are non-refundable.

Credit Card#: Exp Date:

2013webcatalog

Documents

Transcript of 2013webcatalog