2013 helem led luminairs
description
Transcript of 2013 helem led luminairs
Let there be L ight !
www.helem.co.kr
HELEM LED LUMINAIRES Vol.6
Since 2005,
Only HELEM has been studied LED Application
with talented Designers
skilled Engineers
capable Producers
faithful Leader
provide special creative LED light.
The mission of HELEM is to be the leading provider
of high-quality light not luminaires. Light unfolds
its special creative power in an interplay with
space and architecture. The breakthrough of
LED technology currently being experienced
in architectural lighting is probably the biggest
development in lighting technology for decades.
HELEM 's collection of LED luminaires o�er
innovative solutions for commercial, architectural
and retail relevant industry-leading LED solutions.
07
09
11
Down Light series05 Basic Down Light 2”
06 Basic Down Light 3"
Basic Down Light 4"
08 Wall Washer Down Light 4”
Basic Down Light 5"
10 Basic Down Light 6"
RUDI 75 Down Light Series
12 RUDI 100 Down Light Series
13 X-Multi Down Light
14 C- Multi Down Light
15 B’skit Ceiling Light
Spot Light series16 Mini Spot Light
17 3I Spot Light
18 Van Spot Light
C O N T E N T S
What is X-Engine?An LED system conver ts electrons into photons through a
semiconductor. Compared to traditional lighting, LEDs require more
precise current and heat management which drive the expected
lifetime of a unit as well as the speed of light output degradation.
X-Engine = Xicato LED module + Optical Solution + Thermal management (+Driver selection)
-
Unique LED Engine
Heat sink
Xicato LED module
Re�ector
US Patent 7942556 addresses some of the fundamental aspects of
Corrected Cold Phosphor Technology™ used in Xicato’s LE D module
products. Patent 7942540 addresses ways of changing the spectral
distribution of the light coming out of a module by manipulating the
relative position of at least one re�ector and at least one wavelength
converting area within a mixing cavity thus enabling the color point of
the module to be “tuned”.
No Color Bin - Absolutely no ‘binning’
• Each color temperatures is targeted exactly on the Black Body Locus
for perfectly natural white light.•
• Each has a very tight color point conformity with a 1 x 2 SDCM.
• LED binning becomes a thing of the past.
No Color Shift - No Red e�ciency cli�
• Phosphor degradation due to heat is primary cause of color -shift over time.
• Corrected Cold Phosphor Technology ensures long term maintenanceof the phosphor properties, contrary to phosphor on chip solutions.•
• Color consistency maintained within 1 SDCM.
Uniform beam -Intensity and color Temperature & no yellow ring or shadows
The Xicato module has a uniform (Lambertian) emitting disk as source,which is re�ected in the beam.
Xicato LED Moduleicato L
HELEM LED LUMINAIRES
Patented internaloptical mixing cavity Patented ‘Corrected Cold
Phosphor Technology™’
LEDs(not to scale)
E�cient thermaldesign
Let ther be Light!
• McAdams Ellipses and Duv describe human perception of color di�erence.
Duv is measure of color di�erence as perceived by human eye.
Human eye is more sensitive to Duv changes (pink or green hues) than to CCT changes.
CCT along with Duv de�nes how well the whiteness is de�ned for a light source
Xicato speci�cation is much tighter than all other specs, even LED �ne bins Xicato Duv =± 0.001
•
•
•
•
What is the McAdam Ellipses (SDMC) and Duv?
+Duv
-Duv
1
2
WHAT IS X-ENXINE |
Future Proof - Design for one module, get the rest for free
New modules are compatible mechanically, thermally, opticallyand maintaining spec while reducing LED count when LEDsimprove with existing luminaires.
B's 1,100lm B's 1,100lm C's seriesA's 2,000lm A's 800lm
Competitors need to change aperture size as LEDs
> Light distribution changes
400lm 700lm 1,000lm 2,000lm1,300lm
Ability to drop in a replacement module in X years without luminaire impact
No interchange ability
Worlds best Color Rendering Index (CRI ) – “Museum light quality“
Our industry best light quality speci�cation is sustained.
Same aperture, Same mounting,
Not Future Proof
Future Proof
Rel. SizeMacAdam
Ellipse
CCT Range3000K Duv x1000 Description
just noticable di�erence50% see di�erence, 50% not
2 step 4 step 7 step
1 step ±30K ±0.7
2 step ±60K ±1generally acceptable
90% see a color di�erence inwhite scenes-still OK
acceptable innon-white scenes4 step ±100K ±2
7 step ±175K ±0.6 LEDs without binningCurrent ANSI-NEMA standard
3 4
RAHL-CZ020-1542-1
The smallest recessed LED �xture, Basic Down Light 2.5” is proof that good things come in small packages. It has been designed in special shape to solve heat problem and the adaptable spring clip makes the installation quick and easy, suitable for all types of ceiling and hassle free.
1
2
3
3982.5
968.20
342.70
[m] Cone ф [m] [lux]
0.28
0.51
0.98
Basic Down Light 2”
• Small and Compact deigns
• Spring clips
Available in �xed and adjustable versions•
Dimensions (mm) ф83 × 57
Frame AL. Die Casting-Electrostatic Powder Coating
Heat sink AL. Die Casting-Electrostatic Powder Coating
AL. Anodized
Beam angle 19°, 39°, 56°
Light source LED Array
Luminous Flux 899lm
Color Temp. 2,700K | 3,000K | 3,500K | 4,000K | 5,000K
CRI Ra80
Input Voltage 100-277 VAC/ 50~60 Hz(Remote Driver)
Power Consumption 11W
Operating Temp. -20°C ~ + 40°C
Adjustment Tilt 25°
Let ther be Light!
ф75
HELEM LED LUMINAIRES
1
2
3
704.9
176.2
78.3
cd/1000lm56°
C0-C180
200
400
600
800
1000
1.07
2.13
3.20
1
2
3
cd/1000lm39°
C0-C180
400
800
1200
0.72
1.44
2.15
1092.7
273.2
121.4
[m] Cone ф [m] [lux]
[m] Cone ф [m] [lux]
Φ83
57
cd/1000lm19°
C0-C180
1000
2000
3000
4000
25º
Basic Down Light 3” RDHL-XS1300-1539
Basic Down Light 3" is indoor lighting for illumination, using Xicato Spot Module as light source. Simple installation of a light weight suitable for shops, exhibitions and receptions areas. Also, with using high e�ciency re�ector, it can be performed various beam angles.
• Thin trim and Small Cut-Out size
• No Color bin & No Color shift
• Perfectly uniform beam with No yellow ring or shadows
Dimensions (mm) ф87 × 146
Frame AL. Die Casting-Electrostatic Powder Coating
Heat sink AL. Extrusion
AL. Metal Spun
Beam angle 19°, 29°, 35°
Light source Xicato Spot Module
Luminous Flux 1300lm(XSM)1000lm(XSM Artist)
Color Temp. 2,700K | 3,000K | 3,500K | 4,000k
CRI XSM Ra: ≥ 80 XSM Artist Ra: ≥ 95. R9 ≥ 90, R15 ≥ 95 (R9 3500K, 4000K ≥ 85)
Input Voltage 100-240 VAC/ 50~60 Hz(Remote Driver)
Power Consumption Max. 20W(XSM) Max. 25W(XSM Artist)
Operating Temp. -20°C ~ + 40°C
Adjustment Fixed
5 6
ф75
DOWN LIGHT SERIES |
1
2
3
4301.4
1075.4
477.9
[m]cd/1000lm19°
C0-C180 Cone ф [m] [lux]
1000
2000
3000
0.35
0.69
1.04
1
2
3
3169.3
792.3
352.1
[m]cd/1000lm29°
C0-C180 Cone ф [m] [lux]
500
1000
1500
2000
0.53
1.06
1.59
1
2
3
[m]cd/1000lm35°
C0-C180 Cone ф [m] [lux]
400
800
1200
1600
0.63
1.26
1.89
2350.0
587.5
261.1
146
Φ87
RDHL-XS1300-1590
Basic Down Light 4" is the recessed Down Light can be Modi�ed up to 2000lm. Wide ranges of lumen allow creating an equally broad range of e�ects, with same Cut-Out Size.
Dimensions (mm) ф118 × 150
Frame STL Plate THK 1.0 / Powder coating
Heat sink AL. 6063 Pin Fin Type
PC Makrolon
Beam angle 45°
Light source Xicato Spot Module
Luminous Flux 1300lm(XSM)1000lm(XSM Artist)
Color Temp. 2,700K | 3,000K | 3,500K | 4,000k
CRI XSM Ra: ≥ 80 XSM Artist Ra: ≥ 95. R9 ≥ 90, R15 ≥ 95 (R9 3500K, 4000K ≥ 85)
Input Voltage 100-240 VAC/ 50~60 Hz(Remote Driver)
Power Consumption Max. 20W(XSM) Max. 25W(XSM Artist)
Operating Temp. -20°C ~ + 40°C
Adjustment Fixed
Basic Down Light 4”
• Two-stage optical system
• No glare
Light weight with Pin Fin Type Heat Sink•
ф100
HELEM LED LUMINAIRES
1
2
3
[m]cd/1000lm45°
C0-C180 Cone ф [m] [lux]
400
800
1200
1600
7.29
14.58
21.88
954.2
238.6
106.0
150
Φ118
Let ther be Light!
Wall WasherDown Light 4”
• Two-stage optical system
• No glare
• Light weight with Pin Fin Type Heat Sink
7 8
RSHL-XS1300-1591
Wall Washer 4” with a specially designed re�ector to spread the light and provide a smooth and even distribution. Wide ranges of lumen allow creating an equally broad range of e�ects, with same Cut-Out Size.
ф100
DOWN LIGHT SERIES |
1
2
3
[m]cd/1000lm42°
C0-C180 Cone ф [m] [lux]
500
1000
1500
469.5
117.4
52.2
7.47
14.93
22.40
Φ118
150
Dimensions (mm) ф118 × 150
Frame STL Plate THK 1.0 / Powder coating
Heat sink AL. 6063 Pin Fin Type
PC Makrolon
Beam angle 42°
Light source Xicato Spot Module
Luminous Flux 1300lm(XSM)1000lm(XSM Artist)
Color Temp. 2,700K | 3,000K | 3,500K | 4,000k
CRI XSM Ra: ≥ 80 XSM Artist Ra: ≥ 95. R9 ≥ 90, R15 ≥ 95 (R9 3500K, 4000K ≥ 85)
Input Voltage 100-240 VAC/ 50~60 Hz(Remote Driver)
Power Consumption Max. 20W(XSM) Max. 25W(XSM Artist)
Operating Temp. -20°C ~ + 40°C
Adjustment Fixed
Basic Down Light 5”
• Easily replace the re�ector for changing beam angle
• Light weight with Pin Fin Type Heat Sink
Adjustable latch •
ф135
RDHL-XS2000-1541
The Cut-Out size same with the luminaries using Conventional PAR 36 Lamp that is popular for retail settings such as fashion stores. Adjustable latch can accommodate up to 20mm ceiling thickness and can hold �xtures without down the sink.
1
2
3
14336.0
3584.0
1592.9
[m]cd/1000lm14.5°
C0-C180 Cone ф [m] [lux]
2000
4000
6000
0.26
0.51
0.77
1
2
3
6160.8
1540.2
684.5
[m]cd/1000lm25.5°
C0-C180 Cone ф [m] [lux]
1000
2000
3000
0.45
0.90
1.36
1
2
3
3513.2
878.3
[m]cd/1000lm39°
C0-C180 Cone ф [m] [lux]
400
800
1200
1600
0.70
1.40
2.11 390.4
HELEM LED LUMINAIRES
Φ150
134
Dimensions (mm) ф150 × 134
Frame STL Plate THK 1.0 / Powder coating
Heat sink AL. 6063 Pin Fin Type
AL. Faceted-Rectangular
Beam angle 14.5°, 25.5°, 39°
Light source Xicato Spot Module
Luminous Flux 2000lm(XSM)1300lm(XSM Artist)
Color Temp. 2,700K | 3,000K | 3,500K | 4,000k
CRI XSM Ra: ≥ 80 XSM Artist Ra: ≥ 95. R9 ≥ 90, R15 ≥ 95 (R9 3500K, 4000K ≥ 85)
Input Voltage 100-240 VAC/ 50~60 Hz(Remote Driver)
Power Consumption Max. 33W(XSM) Max. 32W(XSM Artist)
Operating Temp. -20°C ~ + 40°C
Adjustment Fixed
Let ther be Light!
Basic Down Light 6”
• Easily replace the re�ector for changing beam angle
• E�ective Passive Heat sink
• Adjustable latch
ф154
9 10
RDHL-XS3000-1558
Basic Down Light 6" can cover 3000lm without active cooler. It allow for creative powerful lighting solution to accentuate architectural spaces. Ideal applications include high ceiling lobbies, shopping malls, and retail spaces.
1
2
3
5190.2
1297.6
576.7
[m]cd/1000lm25°
C0-C180 Cone ф [m] [lux]
1000
500
1500
2000
2500
0.45
0.89
1.34
1
2
2376.0
594.0
[m]cd/1000lm51°
C0-C180 Cone ф [m] [lux]
200
400
600
800
1000
0.96
1.91
3 264.02.87
1
2
3
[m]cd/1000lm41°
C0-C180 Cone ф [m] [lux]
400
800
1200
1600
0.74
1.48
2.22
3418.0
854.5
379.8
DOWN LIGHT SERIES |
Φ172
188
Dimensions (mm) ф172 × 188
Frame STL Plate THK 1.0 / Powder coating
Heat sink AL. Extrusion
PC Faceted-Rectangular or Specular
Beam angle 25°, 41°, 51°
Light source Xicato Spot Module
Luminous Flux 3000lm(XSM)1300lm(XSM Artist)
Color Temp. 2,700K | 3,000K | 3,500K | 4,000k
CRI XSM Ra: ≥ 80 XSM Artist Ra: ≥ 95. R9 ≥ 90, R15 ≥ 95 (R9 3500K, 4000K ≥ 85)
Input Voltage 100-240 VAC/ 50~60 Hz(Remote Driver)
Power Consumption Max. 52W(XSM) Max. 32W(XSM Artist)
Operating Temp. -20°C ~ + 40°C
Adjustment Fixed
RUDI 75 Down Light Series
A collection of small-aperture and recessed down lights, RUDI provide high-performance illumination with Xicato Module. Various frames including pinhole, wall washer, open re�ector, ba�e and optical accessories can satisfy the range of custom requests.
ф75
25º
RDHL-XS1300-1592Basic Down Light
RDHL-XS1300-1593Ba�e Down Light
RDHL-XS1300-1594Pin Hole Down Light
RDHL-XS1300-1592
RDHL-XS1300-1593
RDHL-XS1300-1594
HELEM LED LUMINAIRES
Φ83
134
Φ83
134
Φ83
134
Dimensions (mm) ф83 × 134
Frame AL. Die Casting-Electrostatic Powder Coating
Heat sink AL. 6063 Pin Fin Type
AL. Die Casting and PC Faceted-Rectangular
Beam angle 40°, 56°
Light source Xicato Spot Module
Luminous Flux 1300lm(XSM)1000lm(XSM Artist)
Color Temp. 2,700K | 3,000K | 3,500K | 4,000k
CRI XSM Ra: ≥ 80 XSM Artist Ra: ≥ 95. R9 ≥ 90, R15 ≥ 95 (R9 3500K, 4000K ≥ 85)
Input Voltage 100-240 VAC/ 50~60 Hz(Remote Driver)
Power Consumption Max. 20W(XSM) Max. 25W(XSM Artist)
Operating Temp. -20°C ~ + 40°C
Adjustment Fixed or Tilt 25°
Let ther be Light!
RUDI 100 Down Light Series
• High-grade lighting for illumination
• No glare
• Available to accommodate various �lters and louvers
ф100
25º
11 12
RDHL-XS2000-1595Basic Down Light
RDHL-XS2000-1596Ba�e Down Light
RDHL-XS2000-1597Pin Hole Down Light
RDHL-XS2000-1598Wall Washer Down Light
RDHL-XS2000-1595
RDHL-XS2000-1596
RDHL-XS2000-1597
RDHL-XS2000-1598
DOWN LIGHT SERIES |
168
Φ110
168
Φ110
168
Φ110
168
Φ110
Dimensions (mm) ф110 × 168
Frame AL. Die Casting-Electrostatic Powder Coating
Heat sink AL. 6063 Pin Fin Type
AL. Die Casting and PC Specular
Beam angle 21°, 43°, 59°
Light source Xicato Spot Module
Luminous Flux 2000lm(XSM)1300lm(XSM Artist)
Color Temp. 2,700K | 3,000K | 3,500K | 4,000k
CRI XSM Ra: ≥ 80 XSM Artist Ra: ≥ 95. R9 ≥ 90, R15 ≥ 95 (R9 3500K, 4000K ≥ 85)
Input Voltage 100-240 VAC/ 50~60 Hz(Remote Driver)
Power Consumption Max. 33W(XSM) Max. 32W(XSM Artist)
Operating Temp. -20°C ~ + 40°C
Adjustment Fixed or Tilt 25°
X-Multi Down LightRMLI-XS2000-1567-1Unit RMLI-XS2000-1567-2Unit
Double frame structure can make safety installation and replacement without damage ceiling �nishes. Adjustable latch can accommodate up to 20mm ceiling thickness and can hold �xtures without down the sink.
• Easily replace various frame
• No Color bin & No Color shift
Adjustable latch •
140X
140
280X
140
25º
HELEM LED LUMINAIRES
1
2
3
278.7
696.8
309.7
[m]cd/1000lm37°
C0-C180 Cone ф [m] [lux]
600
1200
1800
2400
6.46
12.92
19.38
105
4
180
160
300
105
4
180
160
160
Dimensions (mm) 160 × 160 × 180 300 × 160 ×180 ( L × D × H)
Frame STL Plate THK 1.0 / Powder coating
Heat sink AL. Die Casting-Electrostatic Powder Coating
AL Faceted-Rectangular
Beam angle 37°
Light source Xicato Spot Module
Luminous Flux 2000lm(XSM)1300lm(XSM Artist)
Color Temp. 2,700K |
|
3,000K | 3,500K | 4,000k
CRI XSM Ra: ≥ 80 XSM Artist Ra: ≥ 95. R9 ≥ 90, R15 ≥ 95 (R9 3500K, 4000K ≥ 85)
Input Voltage 100-240 VAC/ 50~60 Hz(Remote Driver)
Power Consumption Max. 33W(XSM) Max. 32W(XSM Artist)
Operating Temp. -20°C ~ + 40°C
Adjustment Tilt 25°
Let ther be Light!
C-Multi Down LightRMLI-CZ020-1601-1Unit RMLI-CZ020-1601-2Unit
C-Multi Down Light combines a square frame and round re�ector for integration into modern architectural styles and additional accent lighting. This system allows a multitude of possibilities for accent and display lighting by the tilting and aiming of the spotlights.
• Compact deigns
• High CRI version available
• Available in �xed and adjustable versions
13 14
DOWN LIGHT SERIES |
129 × 129 × 116 230 × 129 ×116 ( L × D × H) | Dimensions (mm)
Frame STL Plate THK 1.0 / Powder coating
Heat sink AL. Die Casting-Electrostatic Powder Coating
AL. Anodized
Beam angle 19°, 39°, 56°
Light source LED array
Luminous Flux 899lm
Color Temp. 2,700K | 3,000K | 3,500K | 4,000k | 5,000k
CRI Ra80
Input Voltage 100-277 VAC/ 50~60 Hz(Remote Driver)
Power Consumption 11W
Operating Temp. -20°C ~ + 40°C
Adjustment Tilt 25°
1
2
3
704.9
176.2
78.3
cd/1000lm56°
C0-C180
200
400
600
800
1000
1.07
2.13
3.20
1
2
3
cd/1000lm39°
C0-C180
400
800
1200
0.72
1.44
2.15
1092.7
273.2
121.4
[m] Cone ф [m] [lux]
[m] Cone ф [m] [lux]
116
129
129
116
230
129
110X
110
218X
110
25º
cd/1000lm19°
C0-C180
1000
2000
3000
1
2
3
3982.5
968.20
342.70
[m] Cone ф [m] [lux]
0.28
0.51
0.98
B’skit Ceiling Light
• Modularized in diverse including pendant type
• Anti-Glare Di�usion Film available (optional)
Non Metallic or Chrome Plating �nished available•
RDLC-HN36-1568-xx
This lighting can be adapted to spaces of any height and width, by installing from one to several dozens of, this lighting can be modularized in diverse ways. It is also slanted on a 40 degree angle to minimize glairiness and with exceptional photometric performance, it possess environmentally friendly qualities.
Flexible Use of Space
11 14
12 13
22 23
HELEM LED LUMINAIRES
300
245
300 38
1,400g
Frame Non�ammable ABS
Heat sink AL. 60 Extruded
Beam angle 40°
Light source Assembled Module by FR4 PCB and 1 to 3ea SMD LED Package
Luminous Flux
13.5W(1 LED Type)27W(2 LED Type)33.5W(3 LED Type)
Color Temp.
Input Voltage 100-230 VAC/ 50~60 Hz(Remote Driver)
Power Consumption 13.5W(1 LED Type)27W(2 LED Type)33.5W(3 LED Type)
Operating Temp.
-20°C ~ + 40°C
Adjustment Safety Hook Wire and Neodymium Magnet
Dimensions (mm) 300 × 300 × 38 (L × D × H)
Weight
3,500K | 4,200K
CRI Ra ≥ 80
cd/1000lm40°
C0-C180
200
400
600
245X
246
Let ther be Light!
Mini Spot LightSTLI-XS700-1565
Mini spot is ideal for accent lighting application to museum or art gallery. Small �xture is suited for a speci�c task without disturbing visual �eld. Using Xicato module, Mini spot o�ers the best in class color rendering and color consistency.
• Minimal design
• No Color bin & No Color shift
• available 10° degree with Xicato Point Module(optional)
15 16
180º90º
SPOT LIGHT SERIES |
1
2
3
704.9
176.2
78.3
cd/1000lm56°
C0-C180
200
400
600
800
1000
1.07
2.13
3.20
1
2
3
cd/1000lm40°
C0-C180
400
800
1200
0.72
1.44
2.15
1092.7
273.2
121.4
[m] Cone ф [m] [lux]
[m] Cone ф [m] [lux]
152
147
176 51
Φ58
945g
Body AL. Die Casting-Electrostatic Powder Coating
Heat sink AL. Extrusion
PC Faceted-Rectangular
Beam angle 40°, 56°
Light source Xicato Spot Module
Luminous Flux 700lm(XSM)700lm(XSM Artist)
Color Temp. 2,700K | 3,000K | 4,000K
CRI XSM Ra: ≥ 80 XSM Artist Ra: ≥ 95. R9 ≥ 90, R15 ≥ 95 (R9 3500K, 4000K ≥ 85)
Input Voltage 100-240 VAC/ 50~60 Hz(Integrated Driver)
Power Consumption Max. 12W(XSM) Max. 15W(XSM Artist)
Operating Temp. -20°C ~ + 40°C
Adjustment Tilt 90°, Rotation 180°
Dimensions (mm) ф58 × 176 × 147
Weight
3I Spot LightSTLI-XS1300-1566
The retail, hospitality and leisure, gallery and museum sectors can now bene�t from a high-end state of 3I track light, incorporating great e�ciency savings and the ability to create dynamic surroundings. 3I track are designed to its changing environment, �exible enough to create a desired ambience, o�er a powerful lumen output as well as excellent color rendering properties with no light quality compromises.
• High-grade Track light
• E�ective heat dissipation by back-end natural convection
available 10° degree with Xicato Point Module(optional) •
180º90º
1
2
3
4301.4
1075.4
477.9
[m]cd/1000lm19°
C0-C180 Cone ф [m] [lux]
1000
2000
3000
0.35
0.69
1.04
1
2
3
3169.3
792.3
352.1
[m]cd/1000lm29°
C0-C180 Cone ф [m] [lux]
500
1000
1500
2000
0.53
1.06
1.59
1
2
3
[m]cd/1000lm35°
C0-C180 Cone ф [m] [lux]
400
800
1200
1600
0.63
1.26
1.89
2350.0
587.5
261.1
HELEM LED LUMINAIRES
150
227
126 Φ80
1,020g
Body AL. Die Casting-Electrostatic Powder Coating
Heat sink AL. Extrusion
AL. Metal Spun
Beam angle 19°, 29°, 35°
Light source Xicato Spot Module
Luminous Flux 1300lm(XSM)1000lm(XSM Artist)
Color Temp. 2,700K | 3,000K | 3,500K | 4,000k
CRI XSM Ra: ≥ 80 XSM Artist Ra: ≥ 95. R9 ≥ 90, R15 ≥ 95 (R9 3500K, 4000K ≥ 85)
Input Voltage 100-240 VAC/ 50~60 Hz(Integrated Driver)
Power Consumption Max. 20W(XSM) Max. 25W(XSM Artist)
Operating Temp. -20°C ~ + 40°C
Adjustment Tilt 90°, Rotation 180°
Dimensions (mm) ф80 × 227
Weight
Let ther be Light!
Van Spot LightSTDM-XS2000-1577
A unique smooth and streamlined shape that gives a gentle and feminine character to this spotlight. While the gearbox and the bracket are given volumes, the optical part attracts the attention for its longitudinal cut that visually rear and front part of the product.
• High lumen
• No Color bin & No Color shift
• E�ective heat dissipation by back-end natural convection
17 18
180º90º
SPOT LIGHT SERIES |
1
2
3
[m]cd/1000lm28°
C0-C180 Cone ф [m] [lux]
500
1000
1500
2000
0.48
0.96
1.44
5086.0
1271.5
565.1
Φ107
164
102
154
86
135
219
1,500g
Body AL. Die Casting-Electrostatic Powder Coating
Heat sink AL. Die Casting-Electrostatic Powder Coating
Al. Anodized Specular Silver
Beam angle 28°
Light source Xicato Spot Module
Luminous Flux 2000lm(XSM)1300lm(XSM Artist)
Color Temp. 2,700K | 3,000K | 3,500K | 4,000K
CRI XSM Ra: ≥ 80 XSM Artist Ra: ≥ 95. R9 ≥ 90, R15 ≥ 95 (R9 3500K, 4000K ≥ 85)
Input Voltage 100-240 VAC/ 50~60 Hz(Integrated Driver)
Power Consumption Max. 33W(XSM) Max. 32W(XSM Artist)
Operating Temp. -20°C ~ + 40°C
Adjustment Tilt 90°, Rotation 180°
Dimensions (mm) ф107 × 154 × 219
Weight
O�ce
Factory
#202, 225-13, Yongdap-dong, Sungdong-gu, Seoul, KOREA (133-847)
212, Seowon-ri, Bugnae-myeon, Yeoju-gun, Gyeonggi-do, KOREA (469-852)
Tel +82-2-466-2502~3 Fax +82-2-466-2566 E-mail [email protected]
www . h e l e m . c o . k r
HELEM LED LUMINAIRES Vol.6