2011 catalog - FAS Power | Legrandfaspower.com/faspower-catalog.pdf · FAS power now offers...

2011FAS power pre-FAbricAted

wiring ASSemblieS catalog

eASy to order – eASier to inStAllIf you are constructing a hospital, condominium complex, office building or hotel and the wiring project is substantial or repetitive, look to FaS Power products from legrand/cablofil. With FaS Power, much of the electrical assembly is completed in advance, dramatically cutting project completion times and reducing labor costs a minimum of 50%.

With FaS Power, all of the device choices that you have with standard construction are available, but with the installation ease and labor savings of a pre-fabricated electrical assembly. choose from Pass & Seymour Plugtail outlets and switches or our full line of pre-installed devices. You can also specify per-cut lengths of Mc cable to be pre-wired into each assembly further reducing installation time. FaS Power will speed up the rough-in phase of your project and inspections will never be easier because every assembly is Ul, cUl, Etl or cEtl listed.

Setting up the initial order is also made easy with our online configurator that helps you design and specify the precise parts you need. You can find it on our website at www.faspower.com.

FAS power reduces labor costs a minimum of 50%

introduction

www.legrand.us/cablofil 1

table of contents

Introductionpages 1-3

Floor & Wall Bracket Wired Assembliespages 4-7

Other Accessoriespage 10-11

Wire & Connector Accessoriespage 12-13

Floor & Wall Bracketspages 8-9

Indexpage 13

FAS power now offers plugtail switches from pass & Seymour.

Rough-in is fast and easy with FaS Power. Pre-fabricated floor brackets slide under the sill plate with no vertical measuring needed. Wall brackets with pre-mounted boxes and rings quickly attach to the stud with switches and switch/outlet combinations in place. and all assemblies can be pre-wired for fast installation with Pass & Seymour Plugtail outlets and switches connected to Mc/ac branch circuit wiring using push connector hardware. assemblies can then be connected to a homerun enclosure mounted to a cablofil cable pathway. and for fast job starts, FaS Power products are prepackaged and shipped to the requirements of the contractor.

each FAS power assembly includes:• Floor or wall bracket with one to four gang openings

• Pre-installed boxes

• Pre-installed plaster rings are available in 1/2” to 2” raise or adjustable style

• Far side support arms

• PlugTail or standard devices can be pre-wired to MC/AC cable or packaged separately

• CJ6 wire manager

FAS power Pre-fabricated wiring Assemblies

FAS power can benefit you in many ways:• Fast job starts – FAS Power is packaged and

shipped per contractor instructions

• Reduced rough-in time – Boxes are pre-mounted and grounded

• Pre-installed plaster rings – can be specified to fit any wall thickness

• Pre-wired to MC cable – FAS Power assemblies can be pre-wired to pre-cut Mc/ac cable lengths

• Wide variety of device choices – PlugTail allows you to make device choices at finish or devices can be pre-installed and protected during drywall installation

• Painless inspections – All assemblies are Ul, cUl, Etl or cEtl listed

• Faster finishes – with pre-wired assemblies, just install your Plugtail outlet/switch or remove the cover from pre-installed devices

pre-wired with pass & Seymour plugtail.

connect to home runs supported by cablofil tray.

intr

oduc

tion

2

introduction

www.legrand.us/cablofil 3

The FAS Power Floor Bracket Wired Assembly consists of a

floor bracket, 4" ring, back side support arm, 4" or 411/16" x

2 1/8" boxes and devices,that are pre-wired to Mc/ac cable.

all pre-installed outlets and Plugtail devices are shielded

in plastic to keep them finish ready during the taping and

painting process. the boxes are mounted independent of the

rings to allow the devices to be used for in-line or multi-wire

branch circuits. legrand/cablofil uses quality components

in every FaS Power product, including P&S Plugtail wiring

devices and metallic clad cabling.

installation: the floor bracket is quickly installed by

kicking the lower flange under the wall base then securing

with screws using predrilled holes in the bracket. at finish,

Plugtail allows you to quickly connect to a wide choice of

P&S devices in a variety of colors.

Single opening Floor brAcKet

Floor Brackets are available with 1 thru 4

openings

Box mounting heights are

available at 12”, 15”, 18” and 24”

See a complete list of options on

page 12


page 12


page 12


page 12

Single opening Floor brAcKet cAtAlog numbering exAmple:

c F 1 1 8 - r p t - 0 5 8 - 3 5 0 - m c 1 2 2 - 1

bracket typecF1 – Floor Bracket, Wired with Pushwire Connectors, (1) Opening

box mounting

Height

wiring components

ring back Side Arm Support

mc cable(First, Second, third,

Fourth opening)

For a comprehensive list of floor bracket wiring assembly options, use our handy configurator at www.legrand.us/cablofil.

TR

HG

double opening Floor brAcKet

tHree opening Floor brAcKet Four opening Floor brAcKet TR

HG

TR

HG

TR

HG

FAS power Pre-fabricated Wiring assemblies

4 5www.legrand.us/cablofil

Floo

r &

wal

l br

ack

et a

ssem

blie

s Floor & w

all brack

et assemblies

Floor bracket wired Assemblies — 1 to 4 Openings

PUShWIRE connEctoRS

411/16” x 21/8” BOx

BACk Side SUPPoRt aRM

FlOOR BRACkeT

4” Ring

SInglE gang REcEPtaclE

(nOT inCluded)

BOx MoUntIng

hEIght

PUShWIRE connEctoRS

411/16” x 21/8” BOx


FlOOR BRACkeT

4” RIng

BOx MoUntIng

hEIght

BOx MoUntIng

hEIght

BOx MoUntIng

hEIght

cF218 - rpt - d - 058 - 350 - mc122 - 1

cF318 - rpt - d - d - 050 - 350 - mc122 - 1 cF418 - rpt - d - 0 - d - 058 - 350 - mc122 - 1


(nOT inCluded)


(nOT inCluded)


(nOT inCluded)

The FAS Power Wall Bracket Wired Assembly consists of a

wall bracket, 4" ring, back side support arm, 4" or 411/16" x

2 1/8" boxes and devices, that are pre-wired to

Mc/ac cable. all pre-installed outlets, switches and

Plugtail devices are shielded in plastic to keep them finish

ready during the taping and painting process.

legrand/cablofil uses quality components in every

FaS Power product, including P&S Plugtail wiring devices

and metallic clad cabling.

installation: the wall bracket is quickly installed with

screws using predrilled holes in the bracket. at finish,

Plugtail allows you to quickly connect to a wide choice

of Pass & Seymour devices in a variety of colors.

Single opening wAll brAcKet wired ASSembly

Wall Brackets are available with 1 thru 4

openings


page 12


page 12


page 12


page 12

Single opening wAll brAcKet cAtAlog numbering exAmple:

c w 1 - S S p t - 0 5 8 - 3 5 0 - m c 2 0 2 / m c 2 0 2 - 1

bracket typecF1 – Floor Bracket, Wired with Pushwire Connectors, (1) Opening

wiring components

plaster ring

back Side Arm Support

mc cable(First, Second, third,

Fourth opening)

For a comprehensive list of wall bracket wiring assembly options, use our handy configurator at www.legrand.us/cablofil.

tHree opening wAll brAcKet wired ASSembly

3/4 gAng wAll brAcKet wired ASSembly

Four opening wAll brAcKet wired ASSembly

cw3 - Sgpt - 0 - 0 - 058- 350 - mc122 / mc122-1

cw4 - 0 - J - 0 - 0 - 058 - 350

cw34 - SSSpt - 0 - 0 - 058 - 350 S SS S

G F I S

J

FAS power Pre-fabricated Wiring assemblieswall bracket wiring Assemblies — 1 to 4 Openings


Floo

r &

wal

l br

ack

et a

ssem

blie

s Floor & w

all brack

et assemblies

PUShWIRE connEctoRS


4” Ring

SInglE PolE SWItchES

(nOT inCluded)5”

WAll BRACkeT

PlUgtaIl

411/16” x 21/8” BOx

91/2”

S S

5”

5”

5”

26”

16”

26”

the Floor bracket is the centerpiece of our product line and represents

the latest innovation by our Wiring Systems. the design permits fast

installation anywhere between studs and ensures correct device mounting

height with no measuring required.

installation: The Floor Bracket is installed by kicking the lower flange

under the wall base. two holes are provided for attachment screws if

needed. Accepts 4” and 5” rings, and 4” and 411/16” square boxes mounted

horizontally or vertically.

Floor brackets: 16 gage galvanized steel.

Support Arms: Attach to the back of the Floor Bracket to support the

assembly against the wall behind. no attachment hardware is required.

Purchased separately.

Keyhole openings allow 4” or 411/16” x 21/8” boxes to remain attached.

Support Arms (purchased separately) are attached to the back of the Bracket using the two slots provided.

Attachment Holes for 4” Rings allows 411/16” x 21/8” Boxes to be mounted independently.

Attachment Holes for 411/16” x 21/8” Boxes allow 4” Rings to be mounted independently.

Floor brAcKetS

product no. (eA) gAng center HeigHt

F112 1 12”

F115 1 15”

F118 1 18”

F124 1 24”

F212 2 12”

F215 2 15”

F218 2 18”

F224 2 24”

F312 3 12”

F315 3 15”

F318 3 18”

F324 3 24”

F412 4 12”

F415 4 15”

F418 4 18”

F424 4 24”

cEntER hEIght

the wall bracket offers unsurpassed versatility for the installation of electrical boxes

anywhere between studs at any height.

installation: The Wall Bracket is quickly installed with screws using the holes provided in

the bracket. Accepts 4” and 5” rings, and 4” and 411/16” x 21/8” boxes mounted horizontally

or vertically.

wall brackets: 18 gage galvanized steel.

Support Arms: Attach to the back of the Wall Bracket to support the assembly against the

wall behind. no attachment hardware is required. Purchased separately. (not required for

W16SSl and W24SSl)

wAll brAcKetS

product no. (eA) gAng

W1 1

W3 3

W4 4

W34 3

W16SSl 16” Slider

W24SSl 24” Slider

FAS power Pre-fabricated Wiring assembliesFloor & wall brackets


Floo

r &

wal

l br

ack

ets Floor &

wall br

ackets

F1 F2 F3 F4

6”

5” 5” 5”

6”

24”16”

16” 26” 26”

16” 24” 16”

5”

91/2”

w1

wall bracket attachment holes

Keyhole openings allow boxes to remain attached to the Bracket when the rings are removed.

Support Arms (purchased separately) are attached to the back of the Bracket using the two slots provided.

Attachment Holes for 4” Rings allow 411/16” x 21/8” boxes to be mounted.

w24SSlw16SSl

w3 w4 w34

plastic device covers attach to the front of receptacles,

switches or can be snapped onto empty mud rings to keep

them clean, dust free and finish ready during the taping and

painting process. the covers are replaced later with faceplates

at the trim out phase of construction.

plAStic device coverS

product no. (eA) box Size / device type FAStenerS

included

dCP-1 SInglE gang REcEPtaclE (2) #8-32 SCReWS

dCP-2 dOuBle gAng ReCePTACle (2) #8-32 SCReWS

dCP-3 thREE gang REcEPtaclE (2) #8-32 SCReWS

dCP-4 FoUR gang REcEPtaclE (2) #8-32 SCReWS

dCP-1T SInglE gang togglE SWItch (2) #8-32 SCReWS

dCP-2T dOuBle gAng TOggle SWiTCh (2) #8-32 SCReWS

dCP-3T thREE gang togglE SWItch (2) #8-32 SCReWS

dCP-4T FoUR gang togglE SWItch (2) #8-32 SCReWS

dCP-dT dBl. gAng TOggle SWiTCh & deviCe (2) #8-32 SCReWS

dCP-1R SInglE gang PlaStER RIng onlY nonE

dCP-2R dOuBle gAng PlASTeR Ring Only nonE

dCP-3R thREE gang PlaStER RIng onlY nonE

dCP-4R FoUR gang PlaStER RIng onlY nonE

dCP-R 3" ROund PlASTeR Ring Only nonE

dcp-1t

dcp-2

dcp-3r

puSHwire connectorS

product no. (eA) gAng color

PC-2-yl 2 YElloW

Pc-4-oR 4 oRangE

PC-6-Pl 6 PURPlE

Pc-8-gY 8 gRaY

PC-6-gR 6 gREEn

Pc-8-gR 8 gREEn

wire Size range16-12 AWg Copper Solid Conductors18-12 AWg Copper Stranded Conductors

pi-42-orpi-32-rd

pi-34-ylpc-2-ylpc-4-or

pc-6-gr

all push style connectors used in FaS Power assemblies conform to these standards:voltage rating: 600 volts, 1000 volts for fixtures and signscurrent rating: Matches the largest conductor used temperature rating: 105 degrees C

Adjustable rings are useful in

installation where wall thicknesses

are unknown at the time of order or

electrical rough in.

material: galvanized steel.

Ar-350

AdJuStAble ringS

product no. (eA) device type rAiSe

APR-1-5/8 SInglE gang 5/8” TO 11/4”

APR-1 SInglE gang 3/4” TO 11/2”

APR-2 tWo gang 5/8” TO 11/2”

aPR-3 thREE gang 3/4” TO 11/2”

aPR-R 3-0 ROund 3/4” TO 11/2”

Support ArmS

product no. (eA) wAll deptH

aR-300 3”

aR-350 31/2”

aR-400 4”

aR-450 41/2”

aR-500 5”

aR-550 51/2”

AR-600 6”

AR-650 61/2”

Apr-2Apr-1

Apr-rApr-3

in-Sure™ puSHwire connectorS

product no. (eA) gAng color

Pi-42-OR 1 oRangE

Pi-32-Rd 2 Red

PI-33-oR 3 oRangE

PI-34-Yl 4 YElloW

wire Size range20-12 AWg Solid16-12 AWg Stranded (19 strand or less)18 AWg Stranded (7 strand)18-14 AWg Stranded Tin-Bonded (19 strand or less)

Pi-39-Bl 3 Blue

wire Size range14-10 AWg Solid12-10 AWg Stranded (19 strand or less)14-10 AWg Stranded Tin-Bonded (19 strand or less)

in-Sure™ push-in wire connectors features an easy-

grip design that combined with a low insertion force

makes repetitive electrical connections fast and easy. all

In-Sure wire connectors accept either stranded or solid

wires and include stainless steel inserts that restrict

pull-out. Built-in check ports allow for continuity testing.

pi-39-blpushwire connectors make the job of connecting

wires easier and more reliable than ever before.

Simply strip the wire, insert the conductor into

the connector and you have a solid connection.

the clear housing allows for visual inspection

to ensure the proper connection of stranded or

solid conductors. Integrated test ports allow for

circuit testing under an energized condition.

Support Arms attach to

the back of Floor, Wall, and

universal Brackets to support

the assembly against the

wall behind the devices.

no attachment hardware is

required.

material: Zinc-plated steel.

FAS power Pre-fabricated Wiring assembliesAccessories — covers & adjustable Rings Support arms & Pushwire connectors


oth

er a

cces

sor

ies o

ther accessories

Save cutting, stripping, connection time and reduce scrap with Mc/ac cable attached to FaS Power prewired assemblies. Specify any length of Mc/ac cable up to 99 feet in stranded or solid conductor types. Ig and hcF versions are also available. Mc/ac cable types are available with aluminum and steel jackets in 10/2, 10/3 and 10/4 gauges.

outletS wAll Floor

r Duplex Outlet l l

rpt PlugTail for Duplex Outlet l l

rr 2 Duplex Outlets l l

rrpt PlugTail for 2 Duplex Outlets l l

rtr Tamper Resistant Duplex Outlet l l

rtrpt PlugTail for Tamper Resistant Duplex Outlet l l

rrtr 2 Tamper Resistant Duplex Outlets l l

rrtrpt PlugTail for 2 Tamper Resistant Duplex Outlets l l

rHg Hospital Grade Duplex Outlet l l

rHgpt PlugTail for Hospital Grade Duplex Outlet l l

rrHg 2 Hospital Grade Duplex Outlets l l

rrHgpt PlugTail for 2 Hospital Grade Duplex Outlets l l

r/Sl Duplex Outlet - Half Hot l l

r/Slpt PlugTail for Duplex Outlet - Half Hot l l

g Duplex GFCI Outlet l l

gpt PlugTail for Duplex GFCI Outlet l l

gg 2 Duplex GFCI Oulets l l

ggpt PlugTail for 2 Duplex GFCI Oulets l l

gtr Tamper Resistant Duplex GFCI Outlet l l

gtrpt PlugTail for Tamper Resistant Duplex GFCI Outlet l l

gHg Hospital Grade Duplex GFCI Outlet l l

gHgpt PlugTail for Hospital Grade Duplex GFCI Outlet l l

Sg 1 Single Pole & Duplex GFCI Outlet l

Sgpt PlugTail for 1 Single Pole & Duplex GFCI Outlet l

rig Isolated Ground Duplex Outlet l l

rigpt PlugTail for Isolated Ground Duplex Outlet l l

rrig 2 Isolated Ground Duplex Outlets l l

rrigpt PlugTail for 2 Isolated Ground Duplex Outlets l l

SwitcHeSS Single-Pole Switch l

Spt PlugTail for Single-Pole Switch l

S3 Three-Way Switch l

S3pt PlugTail for Three-Way Switch l

SS 2 Single-Pole Switches l

SSpt PlugTail for 2 Single-Pole Switches l

S3S3 2 Three-Way Switches l

S3S3pt PlugTail for 2 Three-Way Switches l

SS3 1 Single Pole and 1 Three-Way Switch l

SS3pt PlugTail for 1 Single Pole and 1 Three-Way Switch l

mc cAble

d 1 Gang Ring and 4” Box l l

dgp 1 Gang Ring and 4” Box with Ground Pigtail l l

dd 2 Gang Ring and 4” Box l l

ddgp 2 Gang Ring and 4” Box with Ground Pigtail l l

t 1 Gang Ring Only l l

tt 2 Gang Ring Only l l

J Junction Box l

4S0 4” Box Only l l

5S0 5” Box Only l l

plASter ringS050 ½” raise

058 5/8” raise

075 ¾” raise

100 1” raise

125 1 1/4” raise

150 1 1/2” raise

200 2” raise

Apr adjustable

mc cAble type conductorS

Stranded

12/2

12/3

12/4

Solid

HcF Stranded

HcF Solid

Stranded Ap

Solid Ap

HcF Stranded Ap

HcF Solid Ap

ig Stranded

ig Solid

Ac cAble type conductorS

Stranded 12/2

12/3

12/4

Solid

ig Stranded

ig Solid

bAcK Side Arm Support250 2 ½” wall depth

300 3” wall depth

350 3 ½” wall depth

400 4” wall depth


500 5” wall depth


600 6” wall depth

Specify mc/Ac cable with each FAS power assembly and gain a competitive edge on your next project.

legrand®/pass & Seymour devices— meeting the demands of any project.

almost any device can be specified and pre-wired into FaS Power assemblies including gFCi, hCF and Tamper-Resistant devices – available in decorator styles and 15 to 20 amp options. every installed device is protected with a plastic shield that keeps them clean, dust free and finish-ready.

also available is P&S Plugtail™ the fastest, most reliable device installation ever. Install a Plugtail connector instead of pigtails. at finish, select from a wide array of color choices for any device.

For more information go to: www.passandseymour.com.

FAS power Pre-fabricated Wiring assemblieswire & connector Accessories

index

FAS power components

13www.legrand.us/cablofil12

wir

e &

con

nec

tor

acce

ssor

ies w

ire &

conn

ector accessories

APR-1-5/8 ................... Single gang adjustable Ring ............................11APR-1 .......................... Single gang adjustable Ring ............................11APR-2 .......................... two gang adjustable Ring ................................11aPR-3 .......................... three gang adjustable Ring .............................11aPR-R.......................... 3-0 gang adjustable Ring .................................11aR-300 ........................ 3" Support arm .................................................11aR-350 ........................ 31/2" Support arm .............................................11aR-400 ........................ 4" Support arm .................................................11aR-450 ........................ 41/2" Support arm .............................................11aR-500 ........................ 5" Support arm .................................................11aR-550 ........................ 51/2" Support arm .............................................11AR-600 ........................ 6" Support Arm .................................................11AR-650 ........................ 61/2" Support arm .............................................11dCP-1 .......................... Single gang Receptacle....................................10dCP-2 .......................... double gang Receptacle ..................................10dCP-3 .......................... three gang Receptacle ....................................10dCP-4 .......................... Four gang Receptacle ......................................10dCP-1T ........................ Single gang toggle Switch ...............................10dCP-2T ........................ double gang Toggle Switch ..............................10dCP-3T ........................ three gang toggle Switch ................................10dCP-4T ........................ Four gang toggle Switch ..................................10dCP-dT ....................... double gang Toggle Switch & device ..............10dCP-1R ....................... Single gang Plaster Ring only .........................10dCP-2R ....................... double gang Plaster Ring Only ........................10dCP-3R ....................... three gang Plaster Ring only ..........................10dCP-4R ....................... Four gang Plaster Ring only ............................10dCP-R ......................... 3” Round Plaster Ring Only ..............................10F112 ............................. 12" Single gang Floor Bracket ...........................8F115 ............................. 15" Single gang Floor Bracket ...........................8F118 ............................. 18" Single gang Floor Bracket ...........................8

18" Single Opening Floor Bracket Assembly .....4F124 ............................. 24" Single gang Floor Bracket ...........................8F212 ............................. 12" Two gang Floor Bracket ..............................8F215 ............................. 15" Two gang Floor Bracket ..............................8

F218 ............................. 18" Two gang Floor Bracket ..............................8 18" Two Opening Floor Bracket Assembly .........5

F224 ............................. 24" Two gang Floor Bracket ..............................8F312 ............................. 12" Three gang Floor Bracket ...........................8F315 ............................. 15" Three gang Floor Bracket ...........................8F318 ............................. 18" Three gang Floor Bracket ...........................8

18" Three Opening Floor Bracket Assembly ......5F324 ............................. 24" Three gang Floor Bracket ...........................8F412 ............................. 12" Four gang Floor Bracket .............................8F415 ............................. 15" Four gang Floor Bracket .............................8F418 ............................. 18" Four gang Floor Bracket .............................8

18" Four Opening Floor Bracket Assembly ........5F424 ............................. 24" Four gang Floor Bracket .............................8PC-2-yl ....................... Two gang Pushwire Connector (yellow) ...........11Pc-4-oR ...................... Four gang Pushwire Connector (Orange) ........11PC-6-Pl ...................... Six gang Pushwire Connector (Purple)............11Pc-8-gY ...................... eight gang Pushwire Connector (gray) ...........11PC-6-gR ...................... Six gang Pushwire Connector (green) .............11Pc-8-gR ...................... eight gang Pushwire Connector (green) .........11Pi-42-OR ..................... Single gang InSure™ Pushwire connector .......11Pi-32-Rd ..................... two gang InSure™ Pushwire connector...........11PI-33-oR ..................... three gang InSure™ Pushwire connector........11PI-34-Yl ...................... Four gang InSure™ Pushwire connector .........11Pi-39-Bl ...................... three gang InSure™ Pushwire connector........11W1 ............................... Single gang Wall Bracket ...................................9

Single Opening Wall Bracket Assembly .............6W3 ............................... Three gang Wall Bracket ...................................9

Three Opening Wall Bracket Assembly ..............7W4 ............................... Four gang Wall Bracket .....................................9

Four Opening Wall Bracket Assembly ...............7W34.............................. 3/4 gang Wall Bracket ........................................9

3/4 gang Wall Bracket Assembly .......................7W16SSl ....................... 16" Slider Wall Bracket ......................................9W24SSl ....................... 24" Slider Wall Bracket ......................................9

legrand/cablofil8319 State Route 4Mascoutah, il 62258800.658.4641

legrand, north America

60 Woodlawn StreetWest hartford, CT 06110 1.877.By.legRAnd (295.3472)www.legrand.us

570 Applewood Crescentvaughan, Ontario l4k 4B4905.738.9195 www.legrand.ca

©20

11

leg

rand

A

ll R

ight

s R

eser

ved

021

1

legrAnd/cAbloFil market proven products, Jobsite-tested productivityLegrand/Cablofil has the cable management system to handle any project; from interior data cable management to heavy-duty power installations and each are designed to install efficiently to increase your productivity.

cablofil - the world’s most specified wire mesh cable trayCablofil wire mesh cable tray is constructed of precision-engineered high quality welded steel wire. It has been subjected to decades of testing and has seen widespread use with more that 94,000 miles installed worldwide. In actual use it performs in a wide variety of applications from supporting heavy power cables on oil drilling platforms in the North Sea to modern office buildings that support bundles of data cabling.

cablofil ladder tray - For extreme loads and long spans Our cable tray line includes Ladder Tray, Center Spine Tray and Channel Tray. Also available, long span/heavy duty cable tray designed with steel I-beam side rails to support cables and tubing for outdoor industrial applications, roadway crossings and pipe bridges. Now, more than ever, Legrand/Cablofil is your complete resource for all cable management products.

2011 catalog - FAS Power | Legrandfaspower.com/faspower-catalog.pdf · FAS power now offers...

Documents

Transcript of 2011 catalog - FAS Power | Legrandfaspower.com/faspower-catalog.pdf · FAS power now offers...