2010 IEEE Industry Applications Annual Meeting6:30 pm - 7:30 pm President’s Reception (by...
29
2010 IEEE Industry Applications Society Annual Meeting October 3-7, 2010 Hyatt Regency Houston, Texas
Transcript of 2010 IEEE Industry Applications Annual Meeting6:30 pm - 7:30 pm President’s Reception (by...
2010 IEEE Industry
Applications Society
Annual Meeting
October 3-7, 2010Hyatt RegencyHouston, Texas
www.ieee.org/ias 2010 IEEE Industry Applications Society2
President’s Welcome
The IEEE Industry Applications Society welcomes you to our 45th Annual Meeting!
TheAnnualMeetingoffersaforumformembersandguestsoftheIASTechnicalCommitteestogatherinoneplacetopresentpapers,attendtutorials,honorawardwinnersandrenewacquaintances.ThisyearnineoftheeighteenIASTechnicalCommitteeshaveorganizedtechnicalsessionsandtutorialsattheIASAnnualMeeting.Theseeventswillcoverabroadrangeoftopicsinfieldssuchasautomation,control,electrostatics,mining,metals,andstandardsforelectricalinstallations.
ThisisthesecondyearofthenewformatfortheIASAnnualMeeting.Formorethan30yearstheAnnualMeetingfollowedafixedscheduleoftutorials,luncheons,banquets,andtechnicalsessions.WhenthefourTechnicalCommitteesoftheIndustrialPowerConversionSystemsDepartmentmovedtoECCEin2009itpresentedanopportunitytoreviewthemeetingscheduleandmakesomeadjustments.TheAnnualMeetingstillhasmanyofthesameeventsofpreviousmeetings,butsomeofthemareheldondifferentdaysordifferenttimes.Besuretochecktheschedulecarefullytoensurethatyoudon’tmissyourfavoriteevent.
Thetechnicalsessionsandtutorialsaretwoofthemostimportantportionsofthemeeting.Theywillbeheldthroughouttheweek.Buttherewillalsobemanyotherevents.ThewinnersoftheIASOutstandingAchievementAward,theDistinguishedServiceAward,andOutstandingYoungMemberAwardwillbehonoredatthePresident’sAwardBanquetonTuesday.TherewillbeaPlenarySessiononMondaymorningwithpresentationsbyexpertsinrenewableenergy,electricalsafety,aircraft,andelectrostatics.OnMondaytherewillbealuncheonforallstudentsattendingtheconference.RepresentativesfromIASChapterswillattendaworkshoponTuesday.TechnicaltoursarescheduledforSundayandWednesday.Inaddition,theIASExecutiveBoardandIASCouncilwillgatheratthemeetingtoconducttheadministrativebusinessoftheSociety.
Theorganizingcommitteeofthe2010IASAnnualmeetinghasworkedhardtomakeyourstayinHoustonpleasantandproductive.Iwishyouallaveryenjoyableandeducationalweek.
Sincerely,
TomNondahl
IASPresident
45th Annual Meeting - October 3-7. 2010 www.ieee.org/ias 3
IEEE - IAS Leadership
IAS Executive Board President
Thomas A. NondahlRockwell AutomationW-5S23 1201 South Second Street Milwaukee, WI 53204 USA 414 382 0237 414 382 3500 (FAX) [email protected]
Society President-Elect Bruno LequesneEaton CorporationInnovation Center4201 N. 27th StreetMilwaukee, WI 53216-1806USA414 449 7536414 449 6415 (FAX)[email protected]
Society Vice PresidentBlake LloydIris Power LP3110 American DriveMississauga, ON L9V-1T2Canada905 677 4824 905 677 8498 (FAX)[email protected]
Society Treasurer Donald S. ZingerNorthern Illinois UniversityEE Department1425 W. Lincoln HighwayDekalb, IL 60115-2828USA815 753 0540815 758 8303 (FAX)[email protected] Society Past PresidentS. Mark HalpinAuburn UniversityElectrical Engineering200 Broun HallAuburn University, AL 36849USA334 844 1824334 844 1809 (FAX)[email protected]
Operating Department Chairs
Manufacturing Systems Development & Applications DevelopmentM. David Kankam, Ph.D.University Affairs Officer,Research & Technology Directorate,NASA, John Glenn Research Center,2100 Brookpark Rd., MS 49-5 Cleveland, OH 44135216 433 6143216 433 3687 (FAX)[email protected]
Process Industries David B. DurocherEaton Electrical26850 SW Kinsman Rd.Wilsonville, OR 97070USA503 582 2714503 582 2814 (FAX)[email protected]
Industrial&Commercial Power Systems Thomas BaldwinFlorida State University2000 Levy StreetTallahassee, FL 32310850 644 5677850 644 7458 (FAX)[email protected]
Industrial Power Conversion Systems Giovanna OritiNaval Postgraduate SchoolElec. and Comp. Eng. DeptSpanagel Hall, Room 542CUSAMonterey, CA 93943USA831 656 [email protected]
Staff Department Chairs
AwardsAndrew BagleyRockwell Automation Canada135 Dundas StreetCambridge, ON N1R 5X133813 OerlinghausenCanada519 740 4150519 740 9871 (FAX)[email protected]
Chapters & Membership Peter MagyarM&PP Consult – Control and DrivesDalbker Str 71Germany49 5202 97995049 5202 979950 (FAX)[email protected]
EducationDonald DunnAramco Services CompanyMS-10899009 West Loop SouthHouston, TX 77096-1799USA713 432 8588713 432 8275 (FAX)[email protected]
MeetingsR. Mark NelmsAuburn UniversityECE Department200 Broun Hall8th FloorAuburn University, AL 36849-5201USA
334 844 1830334 844 1809 (FAX)[email protected]
PublicationsKevin L. Peterson, P.E.P2S Engineering, Inc.5000 East Spring St. Long Beach, CA 90815USA 562 497 2999 562 497 2990 (FAX)[email protected]
www.ieee.org/ias 2010 IEEE Industry Applications Society4
StandardsT. David MillsChair, Senior Electric Review BoardSavannah River SiteBldg. 707-38B Room 8Aiken, SC 29808USA803 952 8295803 952 8453 (FAX)[email protected]
Standing Committee ChairsConstitution & Bylaws S. Mark HalpinAuburn UniversityElectrical Engineering200 Broun HallAuburn University, AL 36849USA334 844 1824334 844 1809 (FAX)[email protected]
Electronic Communications Ranga TallamRockwell Automation6400 West Enterprise DriveMequon, WI [email protected]
Financial Planning Donald S. Zinger Northern Illinois UniversityEE Department1425 W. Lincoln HighwayDekalb, IL 60115-2828USA815 753 0540815 758 8303 (FAX)[email protected]
Inter-Society Cooperation Position Vacant
Long Range Planning Blake LloydIris Power LP3110 American DriveMississauga, ON L9V-1T2Canada 905 677 4824905 677 8498 (FAX)[email protected]
NominatingS. Mark HalpinAuburn UniversityElectrical Engineering200 Broun HallAuburn University, AL 36849USA334 844 1824334 844 1809 (FAX)[email protected]
Members-at-LargeJ. J. DaiOperation Technology, Inc17 Goodyear, Suite 100Irvine, CA [email protected]
Richard LukaszewskiRockwell Automation6400 West Enterprise DriveMequon, WI [email protected]
Nobuyki MatsuiNagoya Institute of TechnologyGokiso, Showa, NagoyaJapan 466-855581 52 735 542081 52 735 7979 (FAX)[email protected]
Giuseppe PariseElectrical Engineering Dept.Via Eudossiana, 18RomaITALY 18406 [email protected]
Roderick SimmonsBuzzi Unicem USA, Inc.100 Brodhead RoadBethlehem, PA 18018USA610 882 5020 610 997 5920 (FAX)[email protected]
Longya XuThe Ohio State University2015 Neil AveColumbus, OH 43210-1210USA614 292 [email protected]
Ex-Officio & Liaison IEEE Division II DirectoryRobert E. Hebner, JrCenter for Electronmechanics10100 Burnet Road – Bldg EME133Austin, TX 78758-4445USA
512 232 [email protected]
PES President-Elect & IAS LiaisonNoel N. SchulzKansas State UniversityDept. of Electrical & Comp. Eng.2077 Rathbone HallManhatten, KS 66506-5204USA785 532 5600785 532 1188 (FAX)[email protected]
Annual Meeting Chairs 2010 - Houston, Texas Bruno LequesneEaton CorporationInnovation Center4201 N. 27th StreetMilwaukee, WI 53216-1806USA414 449 7536414 449 6415 (FAX)[email protected]
2011- Orlando, Florida 2012 - location TBDBlake LloydIris Power LP3110 American DriveMississauga, ON L9V-1T2Canada 905 677 4824905 677 8498 (FAX)[email protected]
Administrative Office
Society AdministratorLynda BernsteinIEEE IAS Administrator445 Hoes LanePiscataway, NJ 08855732 465 6627 732 562 3881 (FAX)[email protected]
45th Annual Meeting - October 3-7. 2010 www.ieee.org/ias 5
Contents
President’s Welcome......................................................................................................2
IAS Leadership...............................................................................................................3
Registration Hours.........................................................................................................5
Schedule at at Glance............................................................................. . . . ...................6
Conference Daily Activities and Special Events............................................................7
Sponsors........................................................................................................................8
Hotel Map......................................................................................................................9
Tutorial Schedule.........................................................................................................12
Committee Meetings....................................................................................................13
Technical Program.......................................................................................................15
Tutorial Program..........................................................................................................25
Conferences and Workshops......................................................................................27
Registration HoursThe IEEE-IAS Conference Registration Desk will be located Imperial East Foyer
Sunday, October 2, 20101:00 PM - 6:00 PM
Monday, October 3, 20107:00 AM - 6:00 PM
Tuesday, October 4, 20107:00 AM - 7:00 PM
Wednesday, October 5, 20107:00 AM - 6:00 PM
www.ieee.org/ias 2010 IEEE Industry Applications Society6
Schedule At-A-Glance
Sunday, October 3, 2010Meeting Time Event Name Location1:00 pm - 6:00 pm Registration Aboretum Foyer8:00 am - 6:00 pm IAS Board Meeting Arboretum 51:00 pm - 6:00 pm Committee Meetings Please see Committee Meeting Schedule on
page 135:00 pm - 6:00 pm Guide to the IAS Annual Meeting for 1st
Time AttendeesArboretum 4
6:30 pm - 10:00 pm Welcome Reception Imperial East - 3rd FloorMonday, October 4, 2010
7:00 am - 6:00 pm Registration Arboretum Foyer 7:00 am - 8:00 am Authors’ Breakfast Window Box8:00 am - 8:00 pm Spouses’ Suite Willow8:00 am - 11:00 am Plenary Session Imperial East - 3rd Floor
11:30 am - 1:30 pm Zucker Student Luncheon Window Box2:00 pm - 6:00 pm IAS Board Meeting Live Oak2:00 pm - 8:00 pm Technical Sessions See technical program for details11:00 am - 7:00 pm Committee Meetings See committee meeting schedule for details
Tuesday, October 5, 20107:00 am - 7:00 pm Registration Arboretum Foyer7:00 am - 8:00 am Authors’ Breakfast Regency Ballroom8:00 am - 8:00 pm Spouses’ Suite Willow8:00 am - 8:00 pm Technical Sessions See technical program for details8:00 am - 7:00 pm Committee Meetings See committee meeting schedule for details12:00 am - 4:00 pm Council Meeting Regency Ballroom6:30 pm - 7:30 pm President’s Reception (by invitation only) Redbud7:30 pm - 10:00 pm Awards Dinner and President’s Banquet Imperial West End Ballroom
Wednesday, October 6, 20107:00 am - 6:00 pm Registration Arboretum Foyer7:00 am - 8:00 am Authors’ Breakfast Regency Ballroom8:00 am - 8:00 pm Spouses’ Suite Willow8:00 am - 8:00 pm Technical Sessions See technical program for details8:00 am - 8:00 pm Tutorials See tutorial schedule for details
Thursday, October 7, 20108:00 am - 8:00 pm Tutorials See tutorial schedule for details
45th Annual Meeting - October 3-7. 2010 www.ieee.org/ias 7
Conference Amenities
Authors’ BreakfastAn Author’s Breakfast will be held each morning for the authors presenting that particular day. This breakfast is meant to provide that day’s presenting authors with a chance to meet their moderators and colleagues
7:00 AM - 8:00 AMMonday - WindowBoxTuesday - Window Box
Wednesday - Regency Ballroom
Guest Hospitality/Spouses’ SuiteThere will be a hospitality suite available for all registered guests for refreshments and networking during these hours
8:00 AM - 6:00 PM each of the following days
Monday - WillowTuesday - Willow
Wednesday - Willow
Daily Conference BreaksAM Breaks 10:00 AM - 10:30 AMPM Breaks 3:00 PM - 3:30 PM
Special EventsGuide to the IAS Annual Meeting for First Time AttendeesPlease come learn how to take advantage of all the IAS Annual Meeting has to offer if this is your first time in attendance!
Welcome ReceptionSunday, October 3, 20107:00 PM - 9:00 PM
Myron Zucker Student Luncheon(open to all students)
IEEE IAS President’s Special Reception(by invitation only)
IEEE IAS Awards & President’s Banquet
www.ieee.org/ias 2010 IEEE Industry Applications Society8
Sponsors
The IAS Annual Meeting sincerely thanks the following sponsors for their participation:
Adelser(notepad sponsor)
Aramco (tutorial sponsor)
Thermon(facility tour)
Wholesale Electric
45th Annual Meeting - October 3-7. 2010 www.ieee.org/ias 9
Hyatt Regency Hotel Floorplans
I-45
I-10 / HWY 90
610 LOOP
BE
LTW
AY
8
HYATT REGENCYHOUSTON
I-45
HW
Y 59
BELTWAY 8
BE
LTWAY
8
I-10 / HWY 90
I-610 LOOP
HWY 290
HW
Y 5
9
GEORGE BUSHINTERCONTINENTALHOUSTON AIRPORT
WILLIAM P HOBBYAIRPORT
CONFERENCEROOM
Hyatt Regency HoustonDIRECTIONS
From George Bush Intercontinental Airport (26 miles): Take Beltway 8 west
to I-45 South. Exit at McKinney (left). Take McKinney to Milam. Turn right.
Proceed three blocks to Polk. Turn Right. Cross Louisiana intersection and enter
Grand Entrance on left.
From Hobby Airport (12 miles): Take I-45 North. Follow downtown / Scott St. signs.
Exit Pease. Drive 23 city blocks to Louisiana. Proceed four blocks to Polk. Turn left.
Hotel entrance on right.
07.09
www.ieee.org/ias 2010 IEEE Industry Applications Society10
Hyatt Regency Houston
CYPRESS
05.09
45th Annual Meeting - October 3-7. 2010 www.ieee.org/ias 11
Hyatt Regency Houston
OFFICE
05.09
www.ieee.org/ias 2010 IEEE Industry Applications Society12
Committee Meetings
Sunday, October 3Committee Meeting Name Location Begin AdjournPower Systems Protection Executive Subcommittee Arboretum 2 1:00 PM 2:00 PMPSP Generator Grounding Working Group Meeting Arboretum 1 1:00 PM 3:00 PMES Executive Committee Arboretum 2 2:00 PM 3:00 PMPSE Executive Committee Arboretum 2 3:00 PM 4:00 PMPower System Protection Surge Protection Subcommittee Arboretum 1 3:00 PM 3:30 PMPower System Protection Medium Voltage Protection Subcommittee Arboretum 1 3:30 PM 4:00 PMTechnical Standards Coordinating Committee Main Meeting Arboretum 3 4:00 PM 5:00 PMPSP Low Voltage Protection Subcommittee Meeting Arboretum 1 4:00 PM 5:00 PMPSP Main Committee Meeting Arboretum 1 5:00 PM 6:00 PMTBCC - First Principles (Base Book) Working Group, Part I Arboretum 3 5:00 PM 6:00 PMMonday, October 4Discussion on DC Power in Industrial and Commercial Settings Mesquite 11:00 AM 12:00 PMPSE Program Planning Subcommittee Meeting Mesquite 12:00 PM 1:30 PMTBCC - Power Systems Design Working Group Mesquite 1:30 PM 2:30 PMTBCC - Protection and Coordination Working Group Arboretum 5 1:30 PM 2:30 PMTBCC - Grounding Working Group Magnolia 1:30 PM 2:30 PMTBCC - Power Systems Analysis Working Group Mesquite 2:30 PM 3:30 PMTBCC - First Principles (Base Book) Working Group, Part II Arboretum 5 2:30 PM 3:30 PMTBCC - MOS Working Group Magnolia 02:30 PM 3:30 PMTBCC - Emergency/Standby Power Systems Working Group Mesquite 03:30 PM 4:30 PMTBCC - Reliability Working Group Arboretum 5 03:30 PM 4:30 PMES Utility Deregulation Subcommittee Meeting Pecan 04:30 PM 05:00 PMPSE Reliability Subcommittee Meeting Mesquite 04:30 PM 05:30 PMPSE Operational Procedures for Power System Transfer and Lockout Tagout Functions
Arboretum 5 04:30 PM 05:30 PM
PSE Power System Design Subcommittee Meeting Magnolia 04:30 PM 05:00 PMES - Main Committee Meeting Pecan 05:00 PM 06:00 PMPSE Power System Analysis Subcommittee Meeting Magnolia 05:00 PM 05:30 PMManufacturing Systems Development and Applications Department Meeting (MSDAD)
Redbud 05:00 PM 06:00 PM
PSE Emergency & Standby Systems Subcommittee Meeting Mesquite 05:30 PM 06:00 PMPSE Safety, Operations, & Maintenance Subcommittee Meeting Arboretum 5 05:30 PM 06:00 PMPSE Grounding Subcommittee Meeting Magnolia 05:30 PM 06:00 PMPSE Power Quality Subcommittee Meeting Mesquite 06:00 PM 06:30 PMPSE Forensics Working Group Meeting Arboretum 5 06:00 PM 07:00 PMI&CPS Meetings Committee Meeting Magnolia 06:00 PM 07:00 PMIndustrial Automation and Control Committee Arboretum 3 & 4 06:00 PM 08:00 PMMetal Industry Committee Meeting Cottonwood 06:00 PM 07:30 PMPSE Main Committee Meeting Redbud 06:30 PM 7:30 PM
45th Annual Meeting - October 3-7. 2010 www.ieee.org/ias 13
Committee Meetings (Continued)
Tuesday, October 5Transactions Committee Redbud 8:00 AM 9:00 AMMagazine Committee Redbud 9:00 AM 10:00 AMScholarOne Manuscripts User Group Redbud 10:00 AM 11:00 AMC&S Committee Meeting Pecan 11:00 AM 12:00 noonMeeting of committee chairs for 2011 conference Redbud 11:00 AM 12:00 noonI&CPS Technical Program Committee Meeting Pecan 12:00 PM 01:30 PMI&CPS Department OpCom Meeting Pecan 04:00 PM 06:00 PMElectrostatic Processes Committee Arboretum 1& 2 06:00 PM 07:30 PMMining Industry Committee Meeting Magnolia 06:00 PM 07:00 PM
www.ieee.org/ias 2010 IEEE Industry Applications Society14
Tutorial Schedule
Monday, October 4, 2010Title Author Time Location
1 HVDC Transmission Systems: Tech-nology Review and Emerging Trends
Dr. Babak Badrzadeh Vestas Wind Systems A/S
2:00 PM - 6:00 PM Dogwood
Tuesday, October 5, 2010Title Author Time Location
2 Power System Engineering Calculations Part I
Robert Spiewak, P.E. Polamex, Inc
8:00 AM - 12:00 PM Dogwood
3 Power System Engineering Part II Dr. Kurt Ederhoff, PhD, P.E.VI Engineering, LLC
2:00 PM -6:00 PM Dogwood
4 Industrial & Commercial Power System Surge Overvoltage Protection
Dev PaulAECOM Transportation
2:00 PM - 6:00 PM Marketplace (located on lower level by exhibit hall)
Wednesday, October 6, 2010Title Author Time Location
5. MV Adjustable - Speed Drives Kurt LeDouxToshiba International Corp
8:00 AM - 12:00 PM Dogwood
6. IEEE Standard 3007.2 Recommended Practice for the Maintenance of Industrial and Commercial Power Systems
Robert Schuerger, PEHP Critical Facilities Services
8:00 AM - 12:00 PM Cottonwood
7. Safety by Design/Arc Flash Protec-tion
Jim Bowen, PEDashiel Corp
2:00 PM - 6:00 PM Dogwood
8. Field Monitoring and Gas-Oil Analy-sis of Large Power Transformers
Brian SparlingGE Energy Systems, Canada
2:00 PM - 6:00 PM Cottonwood
Thursday, October 7, 2010Title Author Time Location
9. Grounding Considerations for Indus-trial Power Systems
Matt McBurnett, PEVI Engineering, LLC
8:00 AM - 12:00 PM Arboretum 1 & 2
10. Over-Current Coordination for Indus-trial Applications
Doug Durand, PEKBRDominik Pieniazek, PEVI Engineering, Inc.
8:00 AM - 12:00 PM Arboretum 3 & 4
11 2011 NEC Industrial Updates John Paschal, PE Pashal Engineering, Inc.
2:00 PM - 6:00 PM Arboretum 1 & 2
12. A Physical Understaning of Tran-sients in Synchronous Machines
Bogi Bech JensenTechnical University of Denmark (DTU)
2:00 PM - 6:00 PM Arboretum 3 & 4
45th Annual Meeting - October 3-7. 2010 www.ieee.org/ias 15
Tutorial Program
HVDC Transmission Systems: Technology Review and Emerging TrendsDr. Babak Badrzadeh - Vestas Wind Systems A/S
This tutorial presents a review of the stat-of-the-art HVdc technologies, ac and dc system interaction issues, emerg-ing trends and technologies, and planning studies for HVDC transmission systems.
Power System Engineering Calculations Part IRobert Spiewak, P.E. - Polamex, Inc.
• Review of Basic Electrical Engineering Formulas and Calculations• Review of Related Mathematical Concepts• Review of the Per Unit Method• Understanding Linearization and other Theorems• Problem Solving Power System Engineering Calculations Part II
Dr. Kurt Ederhoff, PhD, P.E. - VI Engineering, LLC• Review of Electrical Definitions and Concepts• Mathematics for Basic Electrical Calculations• Calculating Power Factor and Harmonics• Equipment Sizing Calculations• Short Circuit and Grounding Calculations• Problem Solving
Industrial & Commercial Power System Surge Overvoltage Protection Dev Paul - AECOM Transportation
This tutorial will cover the overview of the Surge Overvoltage Protection of Industrial & Commercial AC Power System as well Protection of DC Rapid Transit System
MV Adjustable - Speed Drives Kurt LeDoux - Toshiba International Corp
• MV Drive Technology and Architecture• Solid –State Switching Devices• Basic Power Conversion Techniques• Drive Voltage Stress Issues• Bearing Shaft Currents• Harmonics and Mitigation• Starting Motors with Drives
IEEE Standard 3007.2 Recommended Practice for the Maintenance of Industrial and Commercial Power Systems
Robert Schuerger, PE - HP Critical Facilities ServicesThis tutorial will cover what was formerly Chapters 5 and 6 from the Yellow Book and Chapter 8 from the Orange Book which are now a single comprehensive standard on maintenance for industrial and commercial power systems. New material not in the previous chapters on Reliability Centered Maintenance and Partial Discharge Testing of cables has been added to the standard.
www.ieee.org/ias 2010 IEEE Industry Applications Society16
Tutorial Program
Safety by Design / Arc Flash ProtectionJim Bowen, P.E. – Dashiell Corp
• Safety by Design Considerations and Goals• Arc Faults and Incident Energy• Arc Fault Characteristics and Hazards• Safety Strategies, Options, New Technologies• High Resistance Grounding• NFPA 70 E 2010
Field Monitoring and Gas-Oil Analysis of Large Power TransformersBrian Sparling - GE Energy Services Canada
This technical seminar will focus on the benefits to be achieved with the application of on-line monitoring technologies of critical transformers.
• Life management techniques for power transformer assets• Failure detection and avoidance• Understanding the transformer as a “process’• The chemistry and physics of transformer insulation systems,• Moisture condition analysis of the insulation system• Correlating data to the actual operating conditions
Grounding Considerations for Industrial Power SystemsMatt McBurnett, P.E. - V I Engineering, LLC
• Grounding System Design Principles and Concepts• Grounding System Performance • Recommended Design Procedures / IEEE Std 80• Integrated Grounding System Design • Grounding System Testing and Evaluation
Over-Current Coordination for Industrial ApplicationsDoug Durand, P.E. - KBR Dominik Pieniazek, P.E. - VI Engineering, Inc.
• Types of Fault Current• Protective Devices and Characteristic Curves• Coordination Time Intervals (CTIs)• Partial Differential Relaying• Directional Over Current Protection• Coordinating a System• Rules of Thumb for MV Equipment
2011 NEC Industrial UpdatesJohn Paschal, P.E. - Paschal Engineering, Inc.
• 2011 NEC Industrial Applications Changes and Updates• 2011 NEC Chapter 5 Hazardous (Classified) Locations
A Physical Understanding of Transients in Synchronous Machines
Bogi Bech Jensen - Technical University of Denmark (DTU)This tutorial will allow practicing engineers to develop a better understanding of how synchronous machines behave during transients and to give them a physical understanding of what the transient and sub-transient reactances represent.
45th Annual Meeting - October 3-7. 2010 www.ieee.org/ias 17
Monday, October 4, Morning Plenary
Room: Imperial East - Third FloorCommittee Industrial Automation and Control8:00 AM IAS01p01 Intelligent Coordinated Control of a Wind Farm and
Distributed SmartParks
Pinaki Mitra, Missouri University of Science and Technology, United States; and Ganesh Kumar Venayagamoorthy, Missouri University of Science and Technology, United States
Committee Power System Engineering
8:30 AM IAS01p02 Arc Flash Personal Protective Equipment - Applying Risk Management Principles
Daniel Roberts, Schneider Electric, CanadaCommittee Power System Engineering9:00 AM IAS01p03 To Bond Or Not To Bond: That Is The Question
Massimo Mitolo, Chu & Gassman, United States; Fabio Freschi, Politecnico di Torino, Italy; and Michele Tartaglia, Politecnico di Torino, Italy
Committee General Applications in Industry9:30 AM IAS01p04 Hybrid AC/DC Power System for Zero Energy Buildings of the Future
Liang Downey, Nextek Power Systems, United States10:00 AM BREAKCommittee General Applications in Industry10:30 AM IAS01p05 The More Efficient Aircraft - Leveraging Electrical Power Conversion
Technology to Build Better Aircraft
Mark Harris, Hamilton-Sunstrand, United StatesCommittee Electrostatic Processes11:00 AM IAS0106 A Century of Development in Applied Electrostatics
G.S.P. Castle, University of Western Ontario, Canada
Technical Program: Monday, October 4 - Morning Plenary
www.ieee.org/ias 2010 IEEE Industry Applications Society18
Technical Program: Monday October 4 - Afternoon Sessions
Room: Room: Arboretum 1 & 2 Arboretum 3 & 4 CottonwoodCommittee: Electrostatic Processes Industrial Automation and
ControlMetals Industry
Session 2: Nano- and Micro-Electrostatic Processes
Session Chair: Shesha Jayaram, University of Waterloo, Canada
Session Organizer: Rajesh Sharma, Arkansas State University Jonesboro, United States
Session 3: Smart Management of Renewable Energy Systems
Session Chair: Ganesh K. Venayagamoorthy, Missouri University of Science and Technology, United States
Session Organizer: Marcelo G. Simoes, Colorado School of Mines, United States
Session 5: Rolling, Process Line, Measurement, Metal Working
Session Chair: Thomas J. Dionise, Eaton Electrical, United States
Session Organizer: S. Douglas Cromey, Novelis Inc., Canada
02:00 PM IAS02p01 Organic/inorganic hybrid photovoltaic cells based on substitution-ally doped single wall carbon nanotubes Alexandru Biris, Viney Saini, Zhongrui Li, Thikra Mustafa, Shawn Bourdo, Tito Viswanathan, University of Arkansas at Little Rock, United States; Steven Trigwell, NASA Kennedy Space, United States; Cyril Boyer, and Julien Rioux, Ecole d’Ingenieurs du CESI-EIA, France
IAS03p01 Control study of Fuel Cell, Battery and Solar Hybridization Power Sources Becherif Mohamed, FC-Lab fuel Cell Laboratory, France; Ayad Mohamed-Yacine, IEEE Member, France; and Wack Maxime, SeT Laboratory, France
IAS05p01 A Control Method for Improvement in the Tandem Hot Metal Strip Rolling Process John Pittner, University of Pittsburgh, United States; and Marwan A. Simaan, University of Central Florida, United States
02:30 PM IAS02p02 Development of surface engineered nanostructured photo-anodes for enhanced photo electro-chemical processes Rajesh Sharma, Arkansas State University, United States; Hidetaka Ishihara, Alexandru Biris, ; and Malay Mazumder, University of Arkansas at Little Rock, United States
IAS03p02 Simple Control System for a Switcher Locomotive Hybrid Fuel Cell Power System Donald Zinger, Northern Illinois University, United States; Karthik Yedavali, Northern Illinois University, United States; and Liping Guo, Northern Illinois Univer-sity, United States
IAS05p02 Chock Temperature Supervision Wireless System for a Tandem Cold Mill Juan M Lopera, Universidad de Oviedo, Spain; Andrea Diaz Fernandez, Universidad de Oviedo, Spain; Pablo Baizan, Tecnología Inalambrica para la Industria, Spain; Jose Luis Rendueles, ArcelorMittal, Spain; Jesus M Perez Pereira, ArcelorMittal, Spain; and Laura Ema, ArcelorMittal, Spain
03:00 PM IAS02p03 Investigation of the Optimum Electric Field for a Stable Electrospinning Process Chitral Angammana, University of Waterloo, Canada; and Shesha Jayaram, University of Waterloo, Canada
IAS03p03 Sensorless Power Maximization of PMSG based Isolated Wind-Battery Hybrid Sys-tem Using Adaptive Neuro-Fuzzy Controller Mukhtiar Singh, Ecole de Technology Superieure, Uni-versite du Quebec, Canada; Ambrish Chandra, Ecole de Technology Superieure, Universite du Quebec, Canada; and Bhim Singh, Indian Institute of Technology, India
IAS05p03 Modeling and Matching Design of a Tension Controller using Pendulum Dancer in Roll-to-roll Systems Hyun-Kyoo Kang, Konkuk University, Republic of Korea; Chang-Woo Lee, Konkuk University, Repub-lic of Korea; Kee-Hyun Shin, Konkuk University, Republic of Korea; and Sang-Chul Kim, Kookmin University, Republic of Korea
03:30 PM BREAK BREAK BREAK04:00 PM IAS02p04 An IGBT-Based Pulsed Power
Supply in the Fabrication of Non-contiguous Nanofibres using Electrospinning Rina Baba, and Shesha Jayaram, University of Waterloo, Canada
IAS03p04 Wind Speed and Rotor Position Sensor-less Control for Direct-Drive PMG Wind Turbines Xiang Gong, Xu Yang, and Wei Qiao, University of Nebraska-Lincoln, United States
IAS05p04 Shape Measurement of Steel Strips Using a Laser-Based Three-Dimensional Reconstruction Technique Julio Molleda, Rubén Usamentiaga, Daniel García, Francisco Bulnes, University of Oviedo, Spain; and Laura Ema, ArcelorMittal, Spain
04:30 PM IAS02p05 Low Level Ionic Current Sensing Micro-tip Shahzad Memon, Brunel University, United Kingdom; and Wamadeva Balachandran, Brunel University, United Kingdom
IAS03p05 A Complete Modeling and Simula-tion of Induction Generator Wind Power Systems Yu Zou, University of Akron, United States; Malik Elbuluk, University of Akron, United States; and Yilmaz Sozer, University of Akron, United States
IAS05p05 A Systematic Iron Loss Evaluating Scheme for Electromagnetic Steel Products Cheng-Tsung Liu, Li-Yang Liu, National Sun Yat-Sen University, Taiwan; and Sheng-Yang Lin, China Steel Corporation, Taiwan
05:00 PM IAS02p06 A MEMS Sensor for Gas De-tection in High Voltage Oil Filled EquipmentKrishna Prasad Bhat, State University of New York at Buffalo, United States; Doug-las C. Hopkins, State University of New York at Buffalo, United
IAS03p06 A real-time sharing reference voltage for hybrid generation power system Damien Paire, Systems and Transport Laboratory, France; Marcelo G. Simões, Colorado School of Mines, Engineering Division, United States; Jérémy Lagorse, Systems and Transport Laboratory, France; and Abdel-latif Miraoui, Systems and Transport Laboratory, France
IAS05p06 Performance Improvements in an Arc Welding Power Supply Based on Resonant Inverters Alejandro Navarro Crespin, University of Cantabria, Spain; Rosario Casanueva, University of Cantabria, Spain; and Francisco J. Azcondo, University of Cantabria, Spain
05:30 PM IAS03p07 An Energy Management System for Building Structures Using a Multi-agent Decision-Making Control Methodology Peng Zhao, Siddharth Suryanarayanan, and Marcelo Simoes, Colorado School of Mines, United States
IAS05p07 Automated region of interest retrieval of metallographic images for quality scoring estimation Petr Kotas, Pavel Praks, Technical University of Ostrava, Czech Republic; Ladislav Valek, Arcelor-Mittal Ostrava, Czech Republic; and Vesna Zeljkovic, IT College, Saudi Arabia
45th Annual Meeting - October 3-7. 2010 www.ieee.org/ias 19
Room: Arboretum 1 & 2 Arboretum 3 & 4Committee: Electrostatic Processes Industrial Automation and Control
Session 6: Classical and Emerging Electrostatic Processes
Session Chair: Lucian Dascalescu, University of Poitiers, France
Session Organizer: Lucian Dascalescu, University of Poitiers, France
Session 7: Industrial Automation and Control
Session Chair: Ahmed Rubaai, Howard University, United States
Session Organizer: Marcelo G. Simoes, Colorado School of Mines, United States
8:00 AM IAS06p01 Air-assisted passive ionizer for a charged pipe Toshiyuki Sugimoto, Yamagata University, Japan; Asami Kitamura, Yamagata University, Japan; and Yoshio Higashiyama, Yamagata University, Japan
IAS07p01 DC-Link Voltage Large Signal Stabilization and Transient Control Using a Virtual Capacitor Pierre Magne, GREEN-ENSEM, France;Babak Nahid-Mobarakeh, GREEN-ENSEM, France; and Serge Pierfederici, GREEN-ENSEM, France
8:30 AM IAS06p02 Robust Design and Capability Evaluation of a Tribo-aerodynamic Charging Process for Fine Particles Lucian Dascalescu, University of Poitiers, France; Mihai Bilici, University of Poitiers, France; Ciprian Dragan, University of Poitiers, France; Adrian Samuila, University of Poitiers, France; Youcef Ramdani, University of Sidi-Bel-Abbes, Algeria; and Amar Tilmatine, University of Sidi-Bel-Abbes, Algeria
IAS07p02 QFT-Based Robust Simmering Control for Domestic Induction Cookers Using an Infrared Sensor David Paesa, Universidad de Zaragoza, Spain;Carlos Franco, Universi-dad de Zaragoza, Spain;Sergio Llorente, BSH Home Appliances Group, Spain;Gonzalo Lopez-Nicolas, Universidad de Zaragoza, Spain; and Carlos Sagues, Universidad de Zaragoza, Spain
9:00 AM IAS06p03 Application of Genetic Algorithms to the Optimi-zation of a Roll-Type Electrostatic Separation Process Omar Dahou, University of Sidi-Bel-Abbes, Algeria; Karim Medles, University of Sidi-Bel-Abbes, Algeria; S Touhami, University of Sidi-Bel-Abbes, Algeria; M.F. Boukhoulda, University of Sidi-Bel-Abbes, Algeria; Amar Tilmatine, University of Sidi-Bel-Abbes, Algeria; and Lucian Dascalescu, University of Poitiers, France
IAS07p03 PSO Tuned Flatness Based Control of a Magnetic Levitation System Ejike Anene, Abubakar Tafawa Balewa University, Nigeria; and Ganesh Kumar Venayagamoorthy, Missouri University of Science and Technology, United States
9:30 AM IAS06p04 A performance study of a multi-level electrode treatment chamber for food processing Ayman El-Hag, American University of Sharjah, United Arab Emirates;Shesha Jayaram, University of Waterloo, Canada;Oscar Rodriguez, University of Guelph, Canada; and Mansel Griffiths, University of Guelph, Canada
IAS07p04 A New Method for Estimation and Control of Tem-perature Profile over a Sheet in Thermoforming Process Md. Muminul Islam Chy, McGill University, Canada; and Benoit Boulet, McGill University, Canada
10:00 AM BREAK BREAK
10:30 AM IAS06p05 Numerical Modeling of Triboelectric Charging of Granular Materials in Vibrated Beds Jean-Charles Laurentie, University of Poitiers, France; Philippe Traoré, University of Poitiers, France; Ciprian Dragan, University of Poitiers, France; and Lucian Dascalescu, University of Poitiers, France
IAS07p05 PID-State Torque Control in Electromechanical Drive Systems under Stochastic Load Constantinos Sourkounis, Ruhr-University Bochum, Germany
11:00 AM IAS06p06 Triboelectric Charging of Insulators - Evidence for Electrons versus Ions Meurig Williams, Xerox, United States
IAS07p06 A Conjugate Gradient Method for the Solution of the Inverse Heating Problem in Thermoforming Md. Muminul Islam Chy, McGill University, Canada; and Benoit Boulet, McGill University, Canada
11:30 AM
Technical Sessions: Tuesday, October 5 - Morning Sessions
www.ieee.org/ias 2010 IEEE Industry Applications Society20
Room: Arboretum 5 - Please note that these sessions run 20 minutes in lengthCommittee: Electrostatic Processes
Session 8: Special session : Non-thermal Plasma Processes and Environmental Protection
Session Chair: Akira Mizuno Toyohashi University of Technology, Japan
Session Organizer: Masaaki Okubo Osaka Prefecture University, Japan
8:00 AM IAS08p01 A new mobile IGBT inverter HV test system for ESPs Norbert Grass, Ohm University, Germany; Michael Steingraeber, Siemens Inc., Germany; and Roland Metz, Siemens Inc., United States
8:20 AM IAS08p02 Collection of diesel exhaust particle using gradient force Hideaki Hayashi, Toyohashi University of Technology, Japan; and Kazunori Takashima, Toyohashi University of Technology, Japan
8:40 AM IAS08p03 A Laboratory Analysis of Plasma Based Hybrid Techniques for Treating Engine Exhaust Bangalore Rajanikanth, Indian Institute of Science, India; and Amruthur Srinivasan, SJ College of Engineering, India
9:00 AM IAS08p04 Bench-Scale Test of Toluene Decomposition Using Adsorption and Surface Discharge with Gas Circulation Tomoyuki Kuroki, Osaka Prefecture University, Japan; Kiyoyuki Hirai, Osaka Prefecture University, Japan; Shigeru Matsuoka, Shimakawa Sei-sakusho Co., Ltd., Japan; Jong Youl KIM, Shimakawa Seisakusho Co., Ltd., Japan; and Masaaki Okubo, Osaka Prefecture University, Japan
9:20 AM IAS08P05 Dilute Trichloroethylene Decomposition by using High Pressure Non-Thermal Plasma -Humidity Effects-Yusuke Nakagawa, The University of Tokyo, Japan; Hidetoshi Fujisawa, The University of Tokyo, Japan; Ryo Ono, The University of Tokyo, Japan; and Tetsuji Oda, The Univeristy of Tokyo, Japan
9:40 AM IAS08p06 Removal of Indoor Air Contaminant by Atmospheric Microplasma Kazuo Shimizu, Shizuoka University, Japan;Marius Blajan, Shizuoka University, Japan; and Tomoya Kuwabara, Shizuoka University, Japan
10:00 AM BREAK
11:30 AM IAS08p07 Nobel NOx and VOC Treatment using Concentration and Plasma Decomposition Toshiaki Yamamoto, Tokyo City University, Japan; Souma Asada, Tokyo City University, Japan; Tomohiro Iida, Tokyo City University, Japan; and Yoshiyasu Ehara, Tokyo City University, Japan
10:50 AM IAS08p08 Operation Test of Pilot-Scale Low-Emission Multi-Fuel Boiler with Plasma-Chemical Hybrid NOx Reduction System Hidekatsu Fujishima, Osaka Prefecture University, Japan; Yusuke Yoshioka, Osaka Prefecture University, Japan; Tomoyuki Kuroki, Osaka Pre-fecture University, Japan; Atsushi Tanaka, Takao Iron Works Co., Ltd., Japan; Keiichi Otsuka, Takao Iron Works Co., Ltd., Japan; and Masaaki Okubo, Osaka Prefecture University, Japan
11:10 AM IAS08p09 Analysis of Significant ParametersAffecting the Shielding Failure of HVDC-TL Mohamed Nayel, Assiut University, Egypt; Zhao Jie, CSG, China; and Jinliang He, Tsinghue University, China
11:30 AM IAS08p10 Investigation of Lightning Rod Shielding Angle Mohamed Nayel, Assiut University, Egypt
Technical Sessions: Tuesday, October 5 - Morning Sessions
45th Annual Meeting - October 3-7. 2010 www.ieee.org/ias 21
Room: Magnolia Magnolia CottonwoodCommittee: Metals Industry General Applications of Electrical and
Electronic Engineering IndustryPower System Protection
Session 9: Metal Power Systems / Primary Steel
Session Chair: S. Douglas Cromey Novelis Inc., Canada
Session Organizer: S. Douglas Cromey Novelis Inc., Canada
General Applications in Industry Committee
Session Chair: Thomas Nondahl Rockwell Automation, United States
Session Organizer: Thomas Nondahl Rockwell Automation, United States
Session 10: Power System Protection I Session Chair: Rasheek Rifaat Jacobs Engineering, Canada Session Organizer: Rasheek Rifaat Jacobs Engineering, Canada
8:00 AM IAS09p01 Design, Implementation and Op-erationof a New C-type 2nd Harmonic Filterfor Electric Arc and Ladle Furnaces Cem Ozgur Gercek, TUBITAK-Uzay Institute, Turkey;Muammer Ermi, Middle East Technical University, Turkey;Arif Ertas, Middle East Technical University, Turkey;Kemal Nadir Kose, TUBITAK-Uzay Institute, Turkey; and Ozgur Unsar, TUBITAK-Uzay Institute, Turkey
IAS10p01 Tripping Characteristics of Residual Current Devices under Non-Sinusoidal Currents Ya Ping DU, The Hong Kong Polytechnic University, Hong Kong; Xiang Luo, Shanghai Jiao Tong University, China; Xinghua Wong, The Hong Kong Polytechnic University, Hong Kong; and Mingli Chen, The Hong Kong Polytechnic University, Hong Kong
8:30 AM IAS09p02 Vacuum Circuit Breaker Transients During Switching of an LMF Transformer Thomas Dionise, David Shipp, Visuth Lorch, and Bill MacFarlane, Eaton Corporation, United States
IAS10p02 A Substation Data System Overview Geoffrey Garber, MSE Power Systems, Inc., United States; and Mark Scher, MSE Power Systems, Inc., United States
9:00 AM IAS09p03 Electric Power System Analysis and Design of an Expanding Steel Cogeneration Plant Cheng-Ting Hsu, Southern Taiwan University, Taiwan;Chao-Shun Chen, I-Shou University, Taiwan; and Chia-Hung Lin, Kaohsiung University of Applied Sciences, Taiwan
IAS10P03 Transmitting Power System Dynamics in Existing SCADA using Sam-pling/Interpolation based Data Compression Sheng Su, Changsha University of Science & Technology, China
9:30 AM IAS09p04 Innovative Differential Protection of EAF Electrical Systems Using Low Energy Current Sensors Timothy Day, Cooper Power Systems, United States;Ljubomir Kojovic, Cooper Power Systems, United States; and Dharam Sharma, Nucor-Yamato Steel Company, United States
IAS10p04 Fully Utilizing the Intel-ligent Electronic Device Capability to Reduce Wiring in Industrial Electric Distribution Substations Jakov Vico, GE Digital Energy, Canada;Terrence Smith, GE Digital Energy, United States; and Richard Hunt, GE Digital Energy, United States
10:00 AM BREAK BREAK BREAK
10:30 AM IAS04p01 Compact Fluorescent Lamps and Their Effect on Power Quality and Applica-tion Guidelines Monte Richard, Carollo Engineers, United States; and Pankaj Sen, Colorado School of Mines, United States
IAS10p05 Different Factors Affecting Short Circuit Behavior of a Wind Power Plant Eduard Muljadi, National Renewable Energy Laboratory, United States;Nader Samaan, PNNL, United States;Vahan Gevorgian, National Renew-able Energy Laboratory, United States;Jun Li, EnerNex, United States; and Subbaiah Pasupulati, Oak Creek Energy Systems Inc., United States
11:00 AM IAS04p02 Simple Voltage Modulation Technique for Quasi Six-Phase Series Connected Two-Motor Drive System Atif Iqbal, Texas A&M University at Qatar, Qatar;Mohammad Arif Khan, KIET Engineering College, India;SK Moin Ahmed, and Haitham Abu Rub, Texas A&M University at Qatar, Qatar
IAS10p06 Rule Based Fault Tolerant Protection System using IEC 61850 Protocol Sheng Su, Changsha University of Science & Technology, China
11:30 AM IAS10p07 A New Implementation Meth-od of Wavelet Packet Transform Differen-tial Protection for Power Transformers S A Saleh, Memorial University of New-foundland, Canada;B Scaplen, Memorial University of Newfoundland, Canada; and M A Rahman, Memorial University of New-foundland, Canada
Technical Sessions: Tuesday, October 5 - Morning Sessions
www.ieee.org/ias 2010 IEEE Industry Applications Society22
Room: Arboretum 1 & 2 Arboretum 3 & 4Committee Electrostatic Processes Committee Industrial Automation and Control Committee
Session 11: Electro-hydro-dynamic Processes
Session Chair: Kaz Adamiak, University of Western Ontario, Canada
Session Organizer: Jamal Yagoobi, Illinois Institute of Technology, United States
Session 12: Advanced Drives and Converters
Session Chair: M. David Kankam, NASA, John Glenn Research Center, United States
Session Organizer: Marcelo G. Simoes, Colorado School of Mines, United States
02:00 PM IAS11p01 Dynamics of Water Droplet Distortion and Break-up in a Uniform Electric Field Kazimierz Adamiak, University of Western Ontario, Canada; and Jerzy M. Floryan, University of Western Ontario, Canada
IAS12p01 Simple Dynamic Overmodulation Strategy for Fast Torque Control in DTC of Induction Machines with Constant Switch-ing Frequency Controller Auzani Jidin, UTeM, Malaysia;Nik Rumzi Nik Idris, UTM, Malaysia;Abd-Alhalim Yatim, UTM, Malaysia;T. Sutikno, UTM, Malaysia; and Malik Elbuluk, University of Akron, United States
02:30 PM IAS11p02 The Effect of Charge Injection on EHD Conduction Pumping Miad Yazdani, United Technologies Research Center, United States; and Jamal Seyed-Yagoobi, Illinois Institute of Technology, United States
IAS12p02 Independent Position Controls of Two Permanent Magnet Synchronous Motors Fed by a Five-Leg Inverter Hiroyuki Enokijima, Meiji University, Japan
03:00 PM IAS11p03 Oscillatory dielectric liquid flow generated by EHD micropump Ichiro Kano, Yamagata University, Japan
IAS12p03 Universal Control Strategy for Three Different Multilevel Inverters Ignace Rasoanarivo, GREEN-ENSEM, France;Babak Nahid-Mobarakeh, GREEN-ENSEM, France; and Serge Pierfederici, GREEN-ENSEM, France
03:30 PM BREAK BREAK04:00 PM IAS11p04 Study of Electrohydrodynamic Micropumping
Through Conduction Phenomenon Seyed Reza Mahmoudi, University of Western Ontario, Canada; G.S.P. Castle, University of Western Ontario, Canada;Kazimierz Adamiak, University of Western Ontario, Canada; and M. Ashjaee, University of Teheran, Islamic Republic of Iran
IAS12p04 ISO Efficiency Curves Of A -Two-Phase Hybrid Stepping Motor Stijn Derammelaere, Bram Vervisch, Johannes Cottyn, Bart Vanwalleghem, Kurt Stockman, Technical University College of West-Flanders, Belgium;Frederik De Belie, Ghent University, Belgium;Lieven Vandevelde, Ghent University, Belgium;Peter Cox, ON Semiconductor, Belgium; and Griet Van den Abeele, PsiControl Mechatronics, Belgium
04:30 PM IAS11P05 Numerical Simulation of the Electrical Double Layer Development at the Solid and Dielectric Liquid Inter-face for Flow Electrification Phenomenon Mohamed EL-ADAWY, Université de Poitiers, France; Thierry Paillat, Université de Poitiers, France; Juan Martin Cabaleiro, Universidad de Bue-nos Aires, Argentina; and Gérard Touchard, Université de Poitiers, France
IAS12p05 Fault Detection in a Current Controlled PM Drive Using Back-EMF Estimation and Residual Analysis Nicolas Leboeuf, GREEN-ENSEM, France;Thierry Boileau, GREEN-ENSEM, France;Babak Nahid-Mobarakeh, GREEN-ENSEM, France; and Farid Meibody-Tabar, GREEN-ENSEM, France
05:00 PM IAS11p06 Generation of Water Droplet in Fluorocarbon us-ing Electrostatic Atomization Hironori Aoki, Toyohashi University of Technology, Japan;Hirofumi Kurita, Toyohashi University of Technology, Japan;Thierry Paillat, University of Poitiers, France;Kazunori Takashima, Toyohashi Univer-sity of Technology, Japan; and Akira Mizuno, Toyohashi University of Technology, Japan
IAS12p06 A Voltage Controlled PFC Cuk Converter Based PMBLD-CM Drive for Air-Conditioners Sanjeev Singh, Indian Institute of Technology, India; and Bhim Singh, Indian Institute of Technology, India
05:30 PM IAS12p07 Application of Transfer Switch in Mining Converters Joy Mazumdar, Siemens Industry, Inc., United States
Technical Sessions: Tuesday, October 5 - Afternoon Sessions
45th Annual Meeting - October 3-7. 2010 www.ieee.org/ias 23
Room: Arboretum 5 Magnolia CottonwoodCommittee Power System Engineering Mining Energy Systems
Session 13: Power System Engineering I
Session Chair: Massimo Mitolo Chu and Gassman, United States
Session Organizer: Massimo Mitolo Chu and Gassman, United States
Session 14: Mining Safety, Instrumen-tation and Efficiency
Session Chair: Nathan Wright ASARCO, United States
Session Organizer: Jorge Pontt Technical University Federico Santa Maria, Chile
Session 15: Energy System I
Session Chair: Wei-Jen Lee University of Texas at Arlington, United States
Session Organizer: Joe Weber Emerson, United States
2:00 PM IAS13p01 A Novel System-Centric Intel-ligent Adaptive Control Architecture for damping Inter-area mode oscillations in Power System Sukumar Kamalasadan, University of West Florida, United States; and Gerald Swann, University of West Florida, United States
IAS14p01 Analysis of a Stator Earth Fault Protection System of a Medium Voltage Converter-fed Synchronous Motor
Jorge Pontt, Technical University Federico San-ta Maria, Chile; and Raul Vargas, D.Electronics, Chile
IAS15p01 Modeling and Simulation of PEM Fuel Cell Generator as a Micro Grid
Sukumar Kamalasadan, University of West Florida, United States; and Chad Tanton, University of West Florida, United States
2:30 PM IAS13p02 Corrosive Sulfur in Transformer Oil Jill Smith, United States Bureau of Reclama-tion, United States; and Pankaj Sen, Colorado School of Mines, United States
IAS14p02 Impact of Process and Energy Efficiency in Mineral Processing on Abate-ment of Carbon Emissions Jorge Pontt, Technical University Federico Santa Maria, Chile; Juan Yianatos, Waldo Valderrama, Luis Bergh, Fernando Rojas, Ulises Ramos, Francisco Albayay, and Manuel Olivares, UTFSM, Chile
IAS15P02 Detection and Severity Classification of Rotor Imbalance Faults in Induction Machines Himanshu Jain, Suratsavadee Korkua, University of Texas at Arlington, United States; Wei-Jen Lee, Energy Systems Research Center, University of Texas at Arlington, United States; and Chiman Kwan, Signal Processing, Inc, United States
3:00 PM IAS13p03 A Novel Electronic Controller Implementation for Voltage Regulation of Single Phase Self-Excited Induction Genera-torUjjwal Kalla, S. S. Murthy, Indian Institute of Technology, India; and G. Bhuvaneswari, Indian Institute of Technology, India
IAS14p03 Simulation of a Medium Fre-quency Mesh Network for Communications in Underground Mines Michael Souryal, NIST, United States;Fabien Valoit, NIST, United States;Hui Guo, NIST, United States;Nader Moayeri, NIST, United States;Nicholas Damiano, NIOSH, United States; and David Snyder, NIOSH, United States
IAS15p03 Financial Analysis of A Large Scale Photovoltaic System and Its Impact on Distribution Feeders Chia-Hung Lin, Wei-Lin Hsieh, National Kaohsiung Uni-versity of Applied Sciences, Taiwan;Chao-Shun Chen, I-Shou University, Taiwan;Te-Tien Ku, National Sun Yat-Sen University, Taiwan; and Cheng-Ta Tsai, National Kaohsiung University of Applied Sciences, Taiwan
3:30 PM BREAK BREAK BREAK4:00 PM IAS13p04 Transient Analysis of
Grounding Systems under Lightning Strikes Considering Soil Ionization L. A. Salgado, J. L. Guardado, J. Torres, Instituto Tecnológico de Morelia, Mexico; and E. O. Hernández, Instituto de Investigaciones Eléctricas, Mexico
IAS14p04 Reducing Specific Energy to Shrink the Carbon Footprint in a Copper Electrowinning Facility Eduardo Wiechmann, University of Concepcion, Chile;Anibal Morales, University of Concep-cion, Chile;Pablo Aqueveque, University of Concepcion, Chile; and Robert Mayne-Nicholls, Barrick, Chile
IAS15p04 Energy Yield and Power Fluctua-tion of Different Control Methods for Wind Energy Converters Bingchang Ni, Ruhr-University Bochum, Germany; and Constantinos Sourkounis, Ruhr-University Bochum, Germany
4:30 PM IAS13p05 Reduction of Neutral Cur-rent in Airport Lighting System G Bhuvaneswari, IIT Delhi, India; and G Somasundaram, IIT Delhi, India
IAS14p05 Optimizing Safety and Efficiency in the Mining Industry Jody C. Warren P.E., Shah Shahroozi, P.E., Fluor Corporation, United States
IAS15p05 Impedance Control of Thyristor Controlled Series Capacitor to Improve the Transfer Capability of Remote Wind Farms Kejun Li, Shandong University, China;Wei-Jen Lee, University of Texas at Arlington, United States; and Ying Sun, Shandong University, China
5:00 PM IAS13p06 Reliability of Example Mechanical Systems for Data Center Cooling Selected by Tier Classification Robert Arno, Gardson Githu, Peter Gross, Robert Schuerger, HP and Scott Wilson, HP Critical Facilities Services, United States
IAS15p06 Development and Field Test of Mov-able Conduction-Cooled High Temperature SMES Jiakun Fang, Haishun Sun, Li Ren, China;Jinyu Wen, Huazhong University of ScienceTechnology, China;Wei-Jen Lee, University of Texas at Arling-ton, United States;Youping Xu, Central China Grid Company Ltd, China; and Xiaotao Peng, Wuhan University, China
5:30 PM IAS15p07 Taiwan first large-scale offshore wind farm connection–a real project case study Yuan-Kang Wu, National Penghu University, Taiwan;Ching-Yin Lee, Tungnan University, Tai-wan; and Ging-He Shu, National Taipei University of Technology, Taiwan
Technical Sessions: Tuesday, October 5 - Afternoon Sessions
www.ieee.org/ias 2010 IEEE Industry Applications Society24
Technical Sessions: Wednesday, October 6 - Morning Sessions
Room Arboretum 1 & 2 Arboretum 3 & 4Comittee: Electrostatic Processes Industrial Automation and Control
Session 16: Electrostatic Measurements Session Chair: William D. Greason, University of Western Ontario, Canada Session Organizer: William D. Greason, University of Western Ontario, Canada
Session 17: Intelligent Control Based Power Electronics Session Chair: Donald S. Zinger Northern Illinois University, United States Session Organizer: Marcelo G. Simoes Colorado School of Mines, United States
8:00 AM IAS16p01 Measurement Methodologies for Analysis of Electrostatic Discharge (ESD) Events in Multi-Body Problems William Greason, University of Western Ontario, Canada
IAS17p01 dSPACE DSP-based Real-Time Implementation of Fuzzy Switching Bang-Bang Controller for Automation and Appliance Industry Ahmed Rubaai, Howard University, United States; and Jan Jerry, Howard University, United States
8:30 AM IAS16p02 Surface Potential vs. Electric Field Measurements as Means to Characterize the Charging State of Non-Woven Fabrics Angela Antoniu, University of Poitiers, France;Lucian Dascalescu, University of Poitiers, France;Ionut-Vasile Vacar, University of Poitiers, France;Marius-Cristian Plopeanu, Politehnica University, Bucharest, Romania;Belaid Tabti, A. Mira University, Bejaia, Algeria; and Horia-Nicolai Teodorescu, G. Asachi University, Romania
IAS17p02 DSP-Based Fuzzy Neural Network PI/PD-Like Fuzzy Controller for Motion Controls and Drives Ahmed Rubaai, Howard University, United States; and Paul Young, Howard University, United States
9:00 AM IAS16p03 Tribocharging of Mixed Granular Plastics in a Fluidized-Bed Device Ciprian Dragan, University of Poitiers, France;Ovidiu Fati, University of Poitiers, France;Mirela Radu, University of Poitiers, France;Laur Calin, University of Poitiers, France;Adrian Samuila, University of Poitiers, France; and Lucian Dascalescu, University of Poitiers, France
IAS17p03 FLC Based DTC Scheme to Improve the Dynamic Performance of an IM Drive Mohammad Uddin, Lakehead University, Canada; and Muhammad Hafeez, Lakehead University, Canada
9:30 AM IAS16p04 Measurement of Charge Evolution in Oxides of dc Stressed MOS Structures Ludovic Boyer, Université Montpellier 2, France; Petru Notingher, Université Montpellier 2, France; Serge Agnel, Université Montpellier 2, France; Bernard Rousset, LAAS-CNRS, France; and Jean-Louis San-chez, LAAS-CNRS, France
IAS17p04 Performance Analysis of an FLC Based Online Adaptation of Both Hysteresis and PI Controllers for IPMSM DriveMohammad Uddin, Lakehead University, Canada; and Ronald Rebeiro, Lake-head University, Canada
10:00 AM BREAK BREAK
10:30 AM IAS16p05 Electric Field Sensor Based On A Varactor Diode/MIS/MOS Structure Maciej Noras, University of North Carolina at Charlotte, United States
IAS17p05 Intelligent Monitoring and Control of Microgrid Darshit Shah, Missouri University of ScienceTechnology, United States;Ganesh Kumar Venayagamoorthy, Missouri University of ScienceTech-nology, United States; and Keith Corzine, Missouri University of Science and Technology, United States
11:00 AM IAS16p06 Emission spectroscopy of pulsed powered micro-plasma for surface treatment of PEN film Marius Blajan, Shizuoka University, Japan;Akira Umeda, Shizuoka University, Japan;Shuichi Muramatsu, Shizuoka University, Japan; and Kazuo Shimizu, Shizuoka University, Japan
IAS17p06 Control of High-Speed Sensorless PM Brushless DC Motors K. Wang, Memorial University of Newfoundland, Canada;M A Rahman, Memorial University of Newfoundland, Canada; and J. X. Shen, Zhejiang University, China
45th Annual Meeting - October 3-7. 2010 www.ieee.org/ias 25
Room Arboretum 5 Magnolia Window BoxComittee: Power System Engineering Mining Energy Systems
Session 18 Power System Engineering II Session Chair: Peter Sutherland, GE, United States Session Organizer: Massimo Mitolo Chu and Gassman, United States
Session 19 Mining Machines, Drives and Processes Session Chair: Eduardo Wiechmann University of Concepcion, Chile Session Organizer: Galina Mirzaeva University of Newcastle, Australia
Session 20 Energy System II Session Chair: Wei-Jen Lee University of Texas at Arlington, United States Session Organizer: Joe Weber Emerson, United States
8:00 AM IAS18p01 A Novel MATLAB Graphical User Interface Based Methodology for Analysis, Design and Capacitor Estimation of Self Excited Induction Generators S. S. Murthy, Indian Institute of Technology, India; G. Bhuvaneswari, Indian Institute of Tech-nology, India; Rajesh Kr. Ahuja, Indian Institute of Technology, India; and Sarsing Gao, Indian Institute of Technology, India
IAS19p01 Sliding Window Trend Analy-sis: A Method for Short and Open Circuit Detection in Copper Electrorefining Eduardo Wiechmann, University of Concepcion, Chile;Anibal Morales, University of Concepcion, Chile;Pablo Aqueveque, University of Concep-cion, Chile; and Esteban Pino, University of Concepcion, Chile
IAS20p01 Isolated Asynchronous Generator in Wind Generation Feeding Dynamic Loads Shailendra Sharma, Indian Institute of Tech-nology, India; and Bhim Singh, Indian Institute of Technology, India
8:30 AM IAS18p02 Three-Level 24-Pulse STAT-COM with Pulse Width Control at Funda-mental Frequency Switching Kadagala Venkata Srinivas, Indian Institute of Technology, India; and Bhim Singh, Indian Insti-tute of Technology, India
IAS19p02 Frequency analysis of experi-mental waveforms for DC motors in dig-ging applications Galina Mirzaeva, University of Newcastle, Australia;James Welsh, University of Newcastle, Australia;Terrence Summers, University of New-castle, Australia; and Robert Betz, University of Newcastle, Australia
IAS20p02 Single-Stage Power-Fac-tor-Correction Circuit with Flyback Converter to Drive LEDs for Lighting Applications Ying-Chun Chuang, Kun Shan University, Taiwan; Yu-Lung Ke, National Penghu Univer-sity, Taiwan; Hung-Shiang Chuang, Kao Yuan University, Taiwan; and Chia-Chieh Hu, Kun Shan University, Taiwan
9:00 AM IAS18p03 Designing Harmonic Filters for an Aluminum Smelting Plant Babak Badrzadeh, Vestas Technology R&D, Denmark;Kenneth Smith, Mott MacDonald, United Kingdom; and Roddy Wilson, Mott Mac-Donald, United Kingdom
IAS19p03 Active Compensation of Sub and Interharmonics in Cycloconverter-Fed Grinding Mill Drives Pablo Aravena, Universidad de Concepcion, Chile;Luis Moran, Universidad de Concepcion, Chile;Juan Dixon, Universidad Catolica, Chile; and Geza Joos, McGill University, Canada
IAS20p03 Implementation of a Solar Power Battery Energy Storage System with Maximum Power Point TrackingYu-Lung Ke, National Penghu University, Taiwan;Ying-Chun Chuang, Kun Shan Univer-sity, Taiwan;Yuan-Kang Wu, National Penghu University, Taiwan; and Bo-Tsung Jou, Kun Shan University, Taiwan
9:30 AM IAS18p04 Conjugate Thermal Analysis of a High-Power and High-Frequency Transformer Ping-Huey Tang, Far East University, Taiwan;Chang-Chou Hwang, Feng Chia Univer-sity, Taiwan; and Cheng-Tsung Liu, National Sun Yat-sen University, Taiwan
IAS19p04 A Dynamic Dynamometer for Testing of Mining DC Motors Robert Betz, University of Newcastle, Australia; Galina Mirzaeva, University of Newcastle, Austra-lia; and Terry Summers, University of Newcastle, Australia
IAS20p04 Quantitative Analysis and Rating Considerations of a Doubly Fed Induction Generator for Wind Energy Conversion Systems Vijay Chand Ganti, Indian Institute of Technol-ogy, India; and Bhim Singh, Indian Institute of Technology, India
10:00 AM
BREAK BREAK BREAK
10:30 AM IAS18p05 Analysis of Electromechanical Interactions in a Flywheel System with a Doubly Fed Induction Machine Li Ran, Durham University, United Kingdom; Dawei Xiang, Durham University, United King-dom; and James Kirtley, Jr., MIT, United States
IAS19p05 Fast Discharge Mechanism for Ring Motors in Gearless Draglines Joy Mazumdar, Siemens Industry, Inc., United States
IAS20p05 Performance of Wind En-ergy Conversion System using a Doubly Fed Induction Generator for Maximum Power Point Tracking Shiv Kumar Aggarwal, Indian Institute of Technology, India;Bhim Singh, Indian Institute of Technology, India; and Tara Chandra Kand-pal, Indian Institute of Technology, India
Technical Sessions: Wednesday, October 6 - Morning Sessions
www.ieee.org/ias 2010 IEEE Industry Applications Society26
Room Arboretum 1 & 2 Arboretum 3 & 4Committee Electrostatic Processes Power System Engineering
Session 21: Electric Discharges Session Chair: Norbert Grass, Ohm University, Germany Session Organizer: Akira Mizuno, Toyohashi University of Technology, Japan
Session 22: Power System Engineering III Session Chair: Andy Hernandez, Delphi, United StatesSession Organizer: Massimo Mitolo, Chu and Gassman, United States
02:00 PM IAS21p01 Low Voltage Contact Electrostatic Discharge Phenomena Tetsuji Oda, University of Tokyo, Japan;Keisuke Hanawa, University ofTokyo, Japan;Yoshiyuki Teramoto, University of Tokyo, Japan; and Ryo Ono, University of Tokyo, Japan
IAS22p01 Parallel Operation of Permanent Magnet Genera-tors in Autonomous Wind Energy Conversion System PUNEET GOEL, Government of India, India; Bhim Singh, IIT Delhi, India; Sreenival Murthy, IIT Delhi, India; and Shailendra Tiwari, NTPC Ltd., India
02:30 PM IAS21p02 Effect of the Electric Discharge Confinement on the Perforation Density of Porous Materials Joan J Garcia-Garcia, Universitat Autònoma de Barcelona, Spain; Carolina Garzon, Universitat Autònoma de Barcelona, Colombia; Enrique Miranda, Universitat Autònoma de Barcelona, Spain; Cynthia S Martinez-Cisneros, Universitat Autònoma de Barcelona, Spain; and Julian Alonso, Universitat Autònoma de Barcelona, Spain
IAS22p02 A Series Voltage Regulator based on Quasi-Sinu-soidal Waveform to Achieve Smart-Grid Requirements Igor Pires, Universidade Federal de Minas Gerais, Brazil; Braz Cardoso Filho, Universidade Federal de Minas Gerais, Brazil; and José Carlos Oliveira, Universidade Federal de Uberlândia, Brazil
03:00 PM IAS21p03 Investigations on the Corona performance of a Ceramic disc Insulators integrated with Field Reduction Electrode Subba Reddy, Indian Institute of Science, India; and Udaya Kumar, Indian Institute of Science, India
IAS22p03 Thermal Analysis of Cables in Ducts Using SUPG Finite Element Method Yongchun Liang, Hebei University of Science & Technology, China; and Xiaoyun Sun, Hebei University of Science and Technology, China
03:30 PM BREAK BREAK04:00 PM IAS21p04 Studies on Compact Discharge Plasma Source
for NOX Treatment in Engine Exhaust Bangalore Rajanikanth, Indian Institute of Science, India; and Sankar-san Mohapatro, Indian Institute of Science, India
IAS22p04 Identifying Issues That Adversely Affect Data Center Reliability Through Electrical System Audits Carolyn Cooper, Eaton Corporation, United States; and Thomas Dion-ise, Eaton Corporation, United States
04:30 PM IAS21p05 FEM-FCT Based 2D Simulation of Trichel Pulses in Air Paria Sattari, University of Western Ontario, Canada; G.S.P. Castle, University of Western Ontario, Canada; and Kazimierz Adamiak, University of Western Ontario, Canada
05:00 PM IAS21p06 Effect of relative humidity on the collection ef-ficiency of a wire-to-plane electrostatic precipitator H Nouri, University of Bejaia, Algeria;Youcef Zebboudj, Univer-sity of Bejaia, Algeria;Noureddine Zouzou, University of Poitiers, France;Eric Moreau, University of Poitiers, France; and Lucian Dascalescu, University of Poitiers, France
05:30 PM IAS21p07 Improvement of NOx Reduction Efficiency in Diesel Emission Using Nonthermal Plasma - Exhaust Gas Recirculation Combined Aftertreatment Masaaki Okubo, Osaka Prefecture University, Japan; Keiichiro Yoshida, Osaka Institute of Technology, Japan; Takuya Kuwahara, Osaka Prefecture University, Japan; Yohei Kannaka, Osaka Prefecture University, Japan; and Tomoyuki Kuroki, Osaka Prefecture University, Japan
Technical Sessions: Wednesday, October 6 - Afternoon sessions
45th Annual Meeting - October 3-7. 2010 www.ieee.org/ias 27
Conferences and Workshops
2010 Conferences & Workshops
September 6-8 Rome, Italy
ICEM XIX International Conference on Electrical Machines IAS Technical Co-Sponsor
September 6-8Ohrid, Republic of Mace-donia
EPE-PEMC 2010
14th International Power Electronics and Motion Control Conference
IAS Technical Co-Sponsor
September 12-16 Atlanta, GA USA
ECCE IEEE Energy Conversion Congress and Exposition IAS Co-Sponsor
September 15-17Bogota, Columbia
IEEE ANDESCON 2010
IEEE Andean Conference,Exhibition, and Industry Forum IAS Tecnical Co-Sponsor
September 19-25 Alushta, Crimea, Ukraine
ICEEEC 13th International Conference on Electromechanics, Electrotechnology, Еlectromaterials and Components
IAS Technical Co-Sponsor
September 20-22 San Antonio, TX USA
PCIC Petroleum and Chemical Industry Technical Conference
IAS
October 3-7 Houston, TX USA
IAS Industry Applications Society Annual Meeting IAS
October 10 – 13 Incheon, Korea
ICEMS 2010 International Conference on Electric Machines and Systems
IAS Technical Co-Sponsor
November 8-10Sao Paulo, Brazil
INDUSCON 9th IEEE IAS International Conference on Industry Applications
IAS Technical Co-Sponsor
December 6 -9 Kandy, Sri Lanka
ICSET’10 2nd International Conference on Sustainable Energy Technologies
IAS Technical Co-Sponsor
December 18-22 Ma-nama, Bahrain
ENERGY-CON
ENERGYCON International Conference IAS Technical Co-Sponsor
December 20-23 New Delhi, India
PEDES2010 2010 Power India Power Electronics Drives and Energy Systems IAS Technical Co-Sponsor
www.ieee.org/ias 2010 IEEE Industry Applications Society28
2011 Conferences & Workshops
January 25 – 28 Toronto, ON Canada
ESW 2011 IEEE IAS Electrical Safety Workshop IAS Co-Sponsor
March 6-11 Ft. Worth, TX USA
APEC 2011 IEEE Applied Power Electronics Conference and Exposition IAS Co-Sponsor
May 15 -18 Niagara Falls, ON Canada
IEMDC 2011 International Electric Machines and Drives Conference IAS Co-Sponsor
May 22 -26 St. Louis, MO USA
CIC 2011 IEEE-IAS/PCA Cement Industry Conference IAS Co-Sponsor
June 19 -23 Nashville, TN USA
PPIC 2011 57th IEEE Pulp and Paper Industry Conference IAS
September 18-22 Phoenix, AZ USA
ECCE IEEE Energy Conversion Congress and Exposition IAS Co-Sponsor
September 19 -21Toronto, ON Canada
PCIC 2011 Petroleum and Chemical Industry Technical Con-ference
IAS
October 9 - 13Orlando, FL USA
IAS 2011 IAS Annual Meeting IAS
45th Annual Meeting - October 3-7. 2010 www.ieee.org/ias 29
