2008 Thread Turning

Thread SmarT“Passing all the tests for thread turning”

1

SimpliciTy of deSign

State-of-the-art insert manufacturing processes allow

us to produce precision cutting edges without the

need for secondary grinding or honing – making our

new chipbreaker family the economical choice, up to

20% less than ground inserts. You will also be able

to benefit from outstanding threading performance,

chip control, thread quality and tool life.

To keep things simple, Seco has

engineered a new general-purpose

“A” chipbreaker, your first choice

for a full range of threadforms

in both steel and stainless

steel. This newest member

of the Seco single

point threading family

complements the

A1 (for steel) and

A2 (for stainless

steel) chipbreakers

that can be used to

optimize your operation for even better chip control.

All of which are available in Seco’s unique grade

CP500 that features the most wear resistant PVD

coating available for threading.

your “Single poinT” SoluTion

With the latest additions to the Seco Snap-Tap® range of single

point threading products, we’ve thought of virtually everything

you need. From new first-choice inserts, to improved

tool-holders, software and versatile packaging – our

focus on smart new thread turning solutions keeps

your focus where it’s needed – on productivity

and profits.

2

“Snap-off” only whaT you need

geT unmaTched holding power Recently developed toolholders offer the best

holding power available for longer tool life and

greater accuracy. Seco’s new Anti-Twist™ insert

locking system features a carbide pin in the back

of the insert pocket that resists wear and prevents

the insert from turning or twisting under pressure

during machining.

For added insert and toolholder rigidity, we have

produced a new D-style clamp that pulls the insert

down and into the pocket.

If you are machining small batch quantities, you may

not need a full box of inserts at one time. So, Seco has

designed a unique

cost-saving option

– versatile packaging

featuring snap-off

boxes for as few as

just two inserts.

4

eliminaTe calculaTionS… Simplify programming

Take the guesswork out of your threading operations. Seco’s user-friendly Thread Turning Wizard software

eliminates complicated programs and calculations. With minimal input from you, the Wizard selects your

optimum holder and insert, identifies the best operating parameters, and then downloads the information to

your CNC. For maximum tool life, better chip control, reduced production time and a perfect thread from

the very first cut. All this is free and downloadable at www.secotools.com.

Seco thread turning wizard:

• Eliminatescalculations

• Simplifiesmachining

• Reducesprogrammingtime

• Improvesaccuracyandthreadtolerances

• Reducesthreadingcycletime

• Selectstheoptimumholderandinsert

• Identifiescuttingparameters

• DownloadsinformationtoyourCNC

• IsWindows® 2000 compatible

Plus, the Wizard offers unique advantages:

• Selectsthecorrectnumberofpassesfor

single point threading

• Hasbuilt-inlogictoidentifythecorrect

infeed method

• Determinestherightnumberofthreading

passes for the material specification

•Selectsthecorrectanvil

6

Threading – Code keys

L

R

1

162

E3

R4

1.56

A15

ISO

1

C2

E3

R4 5

1507

166

68

Q

1. Insert clamping

S

Screw

C

Clamp

4. Shank definition 5. Shank width/diameter

2. External/Internal 3. Version 7. Cutting edge length

6. Tool length

00 = Boring bars = Square shanks

For boring bars dia. in inches.For square shanks height in inches.075 = .75”100 = 1.00” etc.150 = 1.50” etc.

Example:Cutting edge length = 16.5 mm (.650”)Symbol = 16

3 = 3”4 = 4”5 = 5”6 = 6”

etc.

8. Other information

E = ExternalN = Internal

L

R

Example:Cutting edge length = 9.525 mm (.375”)Symbol = 09

A = Steel with coolant passageQ = QualifiedCQ = For mounting upside down

---9

HD

9. Other information

HD = Heavy duty

Toolholders

Inserts

1. Cutting edge length 2. External/Internal 3. Version

X = Special

If the cutting edge length consists of only one digit, the designation should start with a 0.Example:• Cutting edge length = .650 inch (16.5 mm) Symbol = 16• Cutting edge length = .375 inch (9.525 mm) Symbol = 09

E = ExternalN = Internal

4. Pitch

6. Number of teeth per cutting edge/ Type of chipbreaker

Full profile: (mm) 0.5 1.25 3.0 6.0 0.7 1,5 4.0 8.0 0.75 1.75 4.5 10.0 0.8 2.0 5.0 12.0 1.0 2.5 5.5 14.0

Full profile: (TPI) 48 18 11 6 2.5 40 16 10 5 2 32 14 9 4.5 24 13 8 4 20 12 7 3

Part profile: A = 0.5–1.5 mm 48–16 TPI AG = 0.5–3.0 mm 48–8 TPI G = 1.75–3.0 mm 18–8 TPI N = 3.5–5.0 mm 7–5 TPI K = 5.5–8.0 mm 4,5–3 TPI

2M = 2 teeth3M = 3 teethTT = TwinthreaderA1 = Chipbreaker designationA2 = Chipbreaker designationA = Universal

5. Thread

Thread =6055ISOUNUNJMJWBSPTNPTNPTFRD

= V profile, 60° = V profile, 55° = ISO, metric = Am. UN = Am. Aerospace = Metr. Aerospace= Whitworth, BSW = Whitworth,Taper = Am. NPT = Am. NPTF (Dryseal)= Round, DIN 405

TRACMESTACMEAPI 384API 396API 404API 504API 506API RDBUT 2.5BUT 2.6VAM

= Trapezoidal, DIN 103 = Am. ACME-G = Am. Stub-ACME = API V 0.038R 1:4 = API V 0.038R 1:6= API V 0.040= API V 0.050= API V 0.050= API Round Casing= Buttress, Fig. 2.5= Buttress, Fig. 2.6= VAM Vallourec

HD

7

Threading – Insert types

Use the guidelines below to choose suitable insert type• Single tooth type• Multi tooth type• K type

First choice, can be used for applications in a variety of materials.Low cutting forces.

Single-tooth insert (Type S) A or Original

First choice for general applications in steel.

Single-tooth insert (Type S) A1 chipbreaker

First choice for general applications in stainless steel.

Single-tooth insert (Type S) A2 chipbreaker

By topping the thread, the workpiece need not be pre-machined to the exact diameter and may be a little oversized. The threading operation is simplified since only one tool is needed for the entire thread (no subsequent deburring is needed).

Full profile

Covers a wide range of thread pitches, which simp-lifies stock-keeping. Requires a correct workpiece diameter prior to threading. The nose radius of the insert is sized to suit the smallest profile within the pitch range of the insert.

Partial profile

First choice for mass production, since fewer passes are necessary.Only for radial infeed.2M = 2 teeth version3M = 3 teeth version

Multi-tooth insert (Type M)

Lower cutting forces than M type. Shorter under cut length thanM type. Only for radial infeed.Use anvil for 2M.

Multi-tooth insert(TWIN THREADER, TT)

K insert (Type K)

For single tooth inserts choose full profileor partial profile design

8

CP200 CP300 CP500 H15

CP300

H15

CP500

CP200

[

[

[

[

[

[

[

[

[

[

[

[

[

[

[

[

[

[

[

[

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

20

21

22

SecoMaterial

Group No.

Steels

Stainless steels

Cast iron

First choice

Threading – Insert grades

CP500 – Universal grade for general threading• Suitable for most workpiece materials• Suitable for external and internal threading• Suitable for most working conditions

First choice for the different Seco Material GroupsUse the tables in the Seco Thread Turning Wizard to classify the workpiece material into a Seco Material Group.Use the table to the left to find the most suitable grade for each Seco Material Group.

PVD coated grades

Wear-resistant grade which is principally intended for high cutting speeds.Optimizing grade in steel and stainless steel.

(Ti, Al) N + TiN

Uncoated grades

First choice for machining normal to hard cast iron. Also suitable for hard steels with a hardness in excess of 350 HB. Micrograin with excellent wear resistance and sharp edge.

PVDUncoated

Grades

Universal very tough micrograin grade for all types of threading in most materials. Excellent for stainless steels and difficult operations.

(Ti, Al) N + TiN

First choice for high-strength steel, martensitic stainless steel, cast iron with low hardness and aerospace alloys. First choice for high cutting speeds. Hard micrograin with sharp edge, highly resistant to plastic deformation.

(Ti, Al) N + TiN

Aluminum

Heat resistant alloys

Hardened steels

9

Threading – Troubleshooting

Rapid flank wear • Reduce the cutting speed.• Increase the infeed per pass.• Select a more wear-resistant grade.• Check that the correct anvil has been selected.

• Select a grade with better resistance to plastic deformation.• Reduce the cutting speed.• Increase the number of passes.• Increase the coolant supply.• Check that the workpiece diameter is correct prior to cutting the thread.

• Increase the cutting speed.• Do not use coolant.

• Select a tougher grade.• Check the workpiece mounting.• Check the cutting speed.

Plastic deformation

Built-up edge

Edge chipping

Insert fracture • Increase the number of passes.• Select a tougher grade.• Check the workpiece mounting.• Check the center height of the cutting edge.• Check for built-up edge.

• Change the cutting speed.• Reduce the overhang and use the most stable toolholder.• Check the center height of the cutting edge.• Check that the workpiece diameter is correct.

• Increase the cutting speed.• Check that the right anvil has been selected.

• Reduce the number of passes.• Increase the cutting speed.• Increase the coolant supply.• Select A1 or A2 chipbreaker.

Vibrations

Poor finish

Poor chip control

Troubleshooting

Optimization

Resistance toplastic deformation

ISO-P (steels) ISO-M (stainless steels) ISO-K (cast iron)

ToughnessWearresistance Toughness

Wearresistance Toughness

Wearresistance



10

09NR A5511NR A5516NR A5516NR AG5516NR G5522NR N55

16NR AG55-A16NR G55-A

16NR AG55-A116NR G55-A1

16NR AG55-A216NR G55-A2

26NR K55

09NR A6011NR A6016NR A6016NR AG6016NR G6022NR N60

11NR A60-A

16NR AG60-A16NR G60-A

11NR A60-A1

16NR AG60-A116NR G60-A1

11NR A60-A2

16NR AG60-A216NR G60-A2

26NR K60

11NL A5516NL A5516NL AG5516NL G5522NL N55

26ER K55

11NL A6016NL A6016NL AG6016NL G6022NL N60

26ER K60

[[

[[[[

CP20

0

CP30

0

[

[[

[

[

[[[

[

0.5–1.50.5–1.50.5-1.50.5-3.01.75-3.03.5-5.0

0.5-3.01.75-3.0

0.5-3.01.75-3.0

0.5-3.01.75-3.0

5.5-10.0

0.5-1.50.5-1.50.5-1.50.5-3.01.75-3.03.5-5.0

0.5-1.50.5-1.50.5-3.01.75-3.0

0.5-1.50.5-1.50.5-3.01.75-3.0

0.5-1.50.5-1.50.5-3.01.75-3.0

5.5-10.0

CP50

0

[[[[

[[

[[

[[

[

[[[[

[[[

[[[

[[[

[

H15

[[[[

[[[[

CP20

0

CP30

0

[[[[

[

[[

[

[

CP50

0

[[[[

[

[[[[

[

H15

48-1648-1648-1648-8 14-8 7-5

48-8 14-8

48-8 14-8

48-8 14-8

4,5-2,5

48-1648-1648-16 48-8 14-8 7-5

48-1648-16 48-8 14-8

48-1648-16 48-8 14-8

48-1648-16 48-8 14-8

4,5-2,5

16ER A5516ER AG5516ER G5522ER N55

16ER AG55-A16ER G55-A

16ER AG55-A116ER G55-A1

16ER AG55-A216ER G55-A2

26ER K55

16ER A6016ER AG6016ER G6022ER N60

16ER A60-A16ER AG60-A16ER G60-A

16ER A60-A116ER AG60-A116ER G60-A1

16ER A60-A216ER AG60-A216ER G60-A2

26ERK60

16EL A5516EL AG5516EL G5522EL N55

26NR K55

16EL A6016EL AG6016EL G6022EL N60

26NR K60

[[

[

[[[

[

[[

[

[

[

[

[[

[

[[[[[[

[[

[[

[[

[

[[[[[[

[

[[

[

[[

[

[[

[

[[[[[

[[[[[

CP20

0

CP30

0

[[[[[

[

[

[

CP50

0

[[[[[

[

[[[[[

[

H15

CP20

0

CP30

0

CP50

0

H15Insert Part No.

Internal rightInserts TPImm

Grades GradesPitch

Insert Part No.External right

Partial profile 55°

Partial profile 60°

Grades

Insert Part No.Internal left

Grades

Insert Part No.External left

External/Internal threading

Threading – Inserts

11

09NR 0.5ISO09NR 0.8ISO09NR 1.0ISO09NR 1.25ISO09NR 1.5ISO09NR 1.75ISO09NR 2.0ISO11NR 0.5ISO11NR 0.75ISO11NR 1.0ISO11NR 1.25ISO11NR 1.5ISO11NR 1.75ISO11NR 2.0ISO16NR 0.5ISO16NR 0.75ISO

16NR 1.0ISO16NR 1.25ISO16NR 1.5ISO16NR 1.75ISO16NR 2.0ISO16NR 2.5ISO16NR 3.0ISO22NR 3.5ISO22NR 4.0ISO22NR 4.5ISO22NR 5.0ISO27NR 5.5ISO27NR 6.0ISO11NR 1.0ISO-A11NR 1.5ISO-A11NR 2.0ISO-A16NR 1.0ISO-A

16NR 1.5ISO-A 16NR 2.0ISO-A16NR 2.5ISO-A16NR 3.0ISO-A11NR 1.0ISO-A111NR 1.5ISO-A111NR 2.0ISO-A116NR 1.0ISO-A1

16NR 1.5ISO-A1

16NR 2.0ISO-A116NR 2.5ISO-A116NR 3.0ISO-A1

11NR 1.0ISO-A211NR 1.5ISO-A211NR 2.0ISO-A216NR 1.0ISO-A2

16NR 1.5ISO-A2

16NR 2.0ISO-A216NR 2.5ISO-A216NR 3.0ISO-A2

16NR 1.0ISO-TT16NR 1.5ISO-TT16NR 2.0ISO-TT

16NR 1.0ISO3M16NR 1.5ISO2M22NR 1.5ISO3M22NR 2.0ISO2M22NR 2.0ISO3M27NR 3.0ISO2M

11NL 0.5ISO11NL 0.75ISO11NL 1.0ISO11NL 1.25ISO11NL 1.5ISO

16NL 0.5ISO16NL 0.75ISO

16NL 1.0ISO16NL 1.25ISO16NL 1.5ISO16NL 1.75ISO16NL 2.0ISO16NL 2.5ISO16NL 3.0ISO22NL 3.5ISO22NL 4.0ISO22NL 4.5ISO22NL 5.0ISO

[[[[[[[[[

[

CP20

0

CP30

0

[[

[[[[[[

[[[[[[[

[[[[[[

0.50.81.01.251.51.752.00.50.751.01.251.51.752.00.50.750.81.01.251.51.752.02.53.03.54.04.55.05.56.01.01.52.01.01.251.51.752.02.53.01.01.52.01.01.251.51.752.02.53.0

1.01.52.01.01.251.51.752.02.53.0

1.01.52.0

1.01.51.52.02.03.0

CP50

0

[[[[[[[[[[[[[[[[

[[[[[[[

[[[[[[[

[[[[[[[

[[[

[[[[[[

H15

[[

[[[[[[[[[[[

CP20

0

CP30

0

[[

[[[[[[[[[[[

CP50

0

[[[[[[[[[[[[[[

H15

16ER 0.5ISO16ER 0.75ISO16ER 0.8ISO16ER 1.0ISO16ER 1.25ISO16ER 1.5ISO16ER 1.75ISO16ER 2.0ISO16ER 2.5ISO16ER 3.0ISO22ER 3.5ISO22ER 4.0ISO22ER 4.5ISO22ER 5.0ISO27ER 5.5ISO27ER 6.0ISO

16ER 1.0ISO-A16ER 1.25ISO-A16ER 1.5ISO-A16ER 1.75ISO-A16ER 2.0ISO-A16ER 2.5ISO-A16ER 3.0ISO-A

16ER 1.0ISO-A116ER 1.25ISO-A116ER 1.5ISO-A116ER 1.75ISO-A116ER 2.0ISO-A116ER 2.5ISO-A116ER 3.0ISO-A1

16ER 1.0ISO-A216ER 1.25ISO-A216ER 1.5ISO-A216ER 1.75ISO-A216ER 2.0ISO-A216ER 2.5ISO-A216ER 3.0ISO-A2

16ER 1.0ISO-TT16ER 1.5ISO-TT16ER 2.0ISO-TT

16ER 1.0ISO3M16ER 1.5ISO2M22ER 1.5ISO3M22ER 2.0ISO2M22ER 2.0ISO3M27ER 3.0ISO2M

16EL 0.5ISO16EL 0.75ISO16EL 0.8ISO16EL 1.0ISO16EL 1.25ISO16EL 1.5ISO16EL 1.75ISO16EL 2.0ISO16EL 2.5ISO16EL 3.0ISO22EL 3.5ISO22EL 4.0ISO22EL 4.5ISO22EL 5.0ISO

[

[

[

[

[

[[[[[

[

[[

[

[

[

[

[

[[[[[[

[[[[

[

[[[

[[[[[[

[[[[[[[[[[[[[[[[

[[[[[[[[[[[[[[[[[

[

[[[[[[[

[

[[[

[[[[

[

[[[

[[[

[[[[[[

[[[[[[[[[

[[[[[[[[[[[

CP20

0

CP30

0

[[[[[

[[

[[[[[[[[[[[

CP50

0

[[[[[

[[

[[[[[[[[[[[

H15

CP20

0

CP30

0

CP50

0

H15Insert Part No.

Internal rightInserts TPImm

Grades GradesPitch


ISO Metric

Grades


Grades




12


11NL 24UN11NL 20UN11NL 18UN11NL 16UN11NL 14UN16NL 32UN16NL 28UN16NL 24UN16NL 20UN16NL 18UN16NL 16UN16NL 14UN

16NL 12UN16NL 11UN16NL 10UN

16NL 8UN22NL 7UN22NL 6UN

[[

[

[

CP20

0

CP30

0

[

[[[[[[

[

[[

CP50

0

[[[[[[[[[[[[[[[[[

[[[[[[

[[[[[[

[[[[[[

[[

[

[[[[[[[[

H15

[[[[[[[

[[[[[[[

[

[[

CP20

0

CP30

0

[[[[[[[

[[[[[[[[

CP50

0

[[[[[[[

[[[[[[[[

H15

201813322824201816143228242018161413121110987654

20181614128

20181614128

20181614128

1612

161212

322824201816128

16ER 32UN16ER 28UN16ER 24UN16ER 20UN16ER 18UN16ER 16UN16ER 14UN16ER 13UN16ER 12UN16ER 11UN16ER 10UN16ER 9UN16ER 8UN22ER 7UN22ER 6UN22ER 5UN27ER 4UN

16ER 20UN-A16ER 18UN-A16ER 16UN-A16ER 14UN-A16ER 12UN-A16ER 8UN-A

16ER 20UN-A116ER 18UN-A116ER 16UN-A116ER 14UN-A116ER 12UN-A116ER 8UN-A1

16ER 20UN-A216ER 18UN-A216ER 16UN-A216ER 14UN-A216ER 12UN-A216ER 8UN-A2

16ER 16UN-TT16ER 12UN-TT

22ER 12UN2M

16ER 32UNJ16ER 28UNJ16ER 24UNJ16ER 20UNJ16ER 18UNJ16ER 16UNJ16ER 12UNJ16ER 8UNJ

16EL 32UN16EL 28UN16EL 24UN16EL 20UN16EL 18UN16EL 16UN16EL 14UN

16EL 12UN16EL 11UN16EL 10UN16EL 9UN16EL 8UN22EL 7UN22EL 6UN22EL 5UN

[[

[

[

[

[

[

[

[

[[[[[[

[[[

[[[[[[[[[[[[[[[[[[[[[

[[[[

[[[[[[

[[[[[[

[[[[[[

[[

[[[

[[[[[[[[

[[[[[

[[[

[

[[

CP20

0

CP30

0

[[[[[

[[[[[

[[[

[

[

CP50

0

[[[[[[[[[[[[

[[[

[[[

H15

CP20

0

CP30

0

CP50

0

H15

UNJ

Insert Part No.Internal rightInserts TPImm

Grades GradesPitch


UN

Grades


Grades



09NR 20UN09NR 18UN09NR 13UN11NR 32UN11NR 28UN11NR 24UN11NR 20UN11NR 18UN11NR 16UN11NR 14UN16NR 32UN16NR 28UN16NR 24UN16NR 20UN16NR 18UN16NR 16UN16NR 14UN16NR 13UN16NR 12UN16NR 11UN16NR 10UN

16NR 8UN22NR 7UN22NR 6UN22NR 5UN

16NR 20UN-A16NR 18UN-A16NR 16UN-A16NR 14UN-A16NR 12UN-A16NR 8UN-A

16NR 20UN-A116NR 18UN-A116NR 16UN-A116NR 14UN-A116NR 12UN-A116NR 8UN-A1

16NR 20UN-A216NR 18UN-A216NR 16UN-A216NR 14UN-A216NR 12UN-A216NR 8UN-A2

16NR 16UN-TT16NR 12UN-TT

22NR 16UN3M22NR 12UN2M22NR 12UN3M

Use internal UN threading insert

13


11NL 19W11NL 14W16NL 28W16NL 20W16NL 19W

16NL 16W16NL 14W16NL 12W16NL 11W16NL 10W16NL 9W16NL 8W22NL 7W22NL 6W22NL 5W

16NL 14BSPT16NL 11BSPT

[

[

[

CP20

0

CP30

0

[[

[

[

[

[[[

[[[

[

1.01.5

CP50

0

[[

[[[[[[[[[[[[[[

[[[

[[[

[[[

[[

[

[[

[[

H15

[[

[[[

[[[[[

[[[[

[[

CP20

0

CP30

0

[[[

[[[[[[[[[

[[

CP50

0

[[[

[[[[[[[[[[

[[

H15

14191428201918161412111098765

1914191411

1914191411

1914191411

1411

11

1411

1411

16ER 1.0MJ16ER 1.5MJ

16ER 28W16ER 20W16ER 19W16ER 18W16ER 16W16ER 14W16ER 12W16ER 11W16ER 10W16ER 9W16ER 8W22ER 7W22ER 6W22ER 5W

16ER 19W-A16ER 14W-A16ER 11W-A

16ER 19W-A116ER 14W-A116ER 11W-A1

16ER 19W-A216ER 14W-A216ER 11W-A2

16ER 14W-TT16ER 11W-TT

22ER 11W2M

16ER 14BSPT16ER 11BSPT

16ER 14BSPT-TT16ER 11BSPT-TT

16EL 28W16EL 20W16EL 19W

16EL 16W16EL 14W16EL 12W16EL 11W16EL 10W16EL 9W16EL 8W22EL 7W22EL 6W22EL 5W

16EL 14BSPT16EL 11BSPT

[[

[

[

[[

[[[

[

[

[[

[[

[

[[

[[[[[[

[[[[[[[[[[

[[

[[

[[

[[

[[

[[

[[

[

[[

[[

[[

[[

[[[[[[[

[[

[[

CP20

0

CP30

0

[[

[[

[[[[[[[

[[

[

CP50

0

[[[[[

[[[[[[[[[[

[[

H15

CP20

0

CP30

0

CP50

0

H15

MJ

BSPT


Grades GradesPitch


Whitworth BSW

Grades


Grades



Use internal ISO threading insert

09NR 14W11NR 19W11NR 14W16NR 28W16NR 20W16NR 19W

16NR 16W16NR 14W16NR 12W16NR 11W16NR 10W16NR 9W16NR 8W22NR 7W22NR 6W22NR 5W

11NR 19W-A11NR 14W-A

16NR 14W-A16NR 11W-A

11NR 19W-A111NR 14W-A1

16NR 14W-A116NR 11W-A1

11NR 19W-A211NR 14W-A2

16NR 14W-A216NR 11W-A2

16NR 14W-TT16NR 11W-TT

22NR 11W2M

16NR 14BSPT16NR 11BSPT

16NR 14BSPT-TT16NR 11BSPT-TT

14


09NR 27NPT09NR 18NPT11NR 18NPT11NR 14NPT

16NR 14NPT16NR 11.5NPT16NR 8NPT

16NR 11.5NPT-A1

16NR 14NPT-A216NR 11.5NPT-A216NR 8NPT-A2

16NR 27NPTF 16NR 14NPTF16NL 11.5NPTF

16NR 10RD16NR 8RD16NR 6RD22NR 6RD27NR 4RD

16NR 1.5TR16NR 2.0TR16NR 3.0TR22NR 4.0TR22NR 5.0TR27NR 6.0TR

20NR 7.0TR20NR 8.0TR26NR 9.0TR26NR 10.0TR26NR 12.0TR26NR 14.0TR

16NL 14NPT16NL 11.5NPT16NL 8NPT

16NL 11.5NPTF

22NL 6RD

16NL 1.5TR16NL 2.0TR16NL 3.0TR22NL 4.0TR22NL 5.0TR

CP20

0

CP30

0

[

[

[

[[[[

[[[

[[[[[[

1.52.03.04.05.06.0

7.08.09.010.012.014.0

CP50

0

[[[[[

[

[

[

[[

[[[[[

[[[[[[

[[[[[[

H15

[[[[

[[

CP20

0

CP30

0

[[[[

[

[[[[[

CP50

0

[[[[

[

[[[[[

H15

27181814271814

11.58

11.5

1411.5

8

11.5

2714

11.5

108664

16ER 27NPT16ER 18NPT16ER 14NPT16ER 11.5NPT16ER 8NPT

16ER 11.5NPT-A1

16ER 11.5NPT-A2

22ER 11.5NPT2M

16ER 14NPTF16ER 11.5NPTF

16ER 10RD16ER 8RD16ER 6RD22ER 6RD27ER 4RD

16ER 1.5TR16ER 2.0TR16ER 3.0TR22ER 4.0TR22ER 5.0TR27ER 6.0TR

20ER 7.0TR20ER 8.0TR26ER 9.0TR26ER 10.0TR26ER 12.0TR26ER 14.0TR

[

[

[

[[[[[

[

[[[[[[

[[[[

[[[

[

[[[

[[[

[[[[[

[[[[[[

[[[[[[

[[[

[

[[

CP20

0

CP30

0

[[[

[

[[[[

CP50

0

[[[

[

[

[[[[[

H15

CP20

0

CP30

0

CP50

0

H15

16EL 18NPT16EL 14NPT16EL 11.5NPT16EL 8NPT

22EL 6RD

16EL 1.5TR16EL 2.0TR16EL 3.0TR22EL 4.0TR22EL 5.0TR

NPTF

TR-DIN 103

NPT


Grades GradesPitch


Grades


Grades



Round-DIN405

15

16NR 8ACME22NR 6ACME22NR 5ACME27NR 4ACME

20NR 3.5ACME20NR 3ACME26NR 2ACME

16NR 8STACME22NR 6STACME27NR 4STACME

22NR 5API40422NR 4API38627NR 4API38427NR 4API38627NR 4API50427NR 4API506

16NR 10APIRD16NR 8APIRD

27NR 8APIRD2M

22NR 6VAM22NR 5VAM22NR 5BUT2.5

22NR 5BUT2.6

22NL 5ACME

CP20

0

CP30

0

[[

[

[[

[[

[[

[[[[[[

[[

[

[[

[

CP50

0

[[[[[[

[[[

[[

[[

[[[[[[

[[

[

[[

[

H15

CP20

0

CP30

0

[[

[

CP50

0

[[

[

H15

12108654

3.532

864

32

544444

108

108

655

5

16ER 12ACME16ER 10ACME16ER 8ACME22ER 6ACME22ER 5ACME27ER 4ACME

20ER 3ACME20ER 3ACME26ER 2ACME

22ER 6STACME27ER 4STACME

20ER 3STACME26ER 2STACME

22ER 5API40422ER 4API38627ER 4API38427ER 4API38627ER 4API50427ER 4API506

16ER 10APIRD16ER 8APIRD

22ER 10APIRD2M27ER 8APIRD2M

22ER 6VAM22ER 5BUT2.5

22ER 5BUT2.6

22EL 6ACME22EL 5ACME

22EL 6STACME

[[[[

[[

[[

[[[[[[

[

[

[[[

[

[[[[

[[

[[[

[[[[[[

[[

[[[

[

[

CP20

0

CP30

0

[

CP50

0

[

H15

CP20

0

CP30

0

CP50

0

H15

StubACME

API

API RD

VAM-API BUTTRESS 2.5

VAM-API BUTTRESS 2.6

ACME


Grades GradesPitch


Grades


Grades




16

Threading – Toolholders, external

CER/L...Q CER/L...QHD

CER 0375 3-16Q 050 4-16Q 0625 4-16Q 075 5-16QHD 100 5-16QHD 100 6-16QHD 125 6-16QHD 150 6-16QHD

CEL 0375 3-16Q 050 4-16Q 0625 4-16Q 075 5-16QHD 100 5-16QHD 100 6-16QHD 125 6-16QHD 150 6-16QHD

CER 100 5-22QHD 100 6-22QHD 125 6-22QHD 150 6-22QHDCEL 100 5-22QHD 100 6-22QHD 125 6-22QHD 150 6-22QHD

CER 100 6-27QHD 125 6-27QHD 150 6-27QHDCEL 100 6-27QHD 125 6-27QHD 150 6-27QHD

.375

.500

.625

.7501.001.001.251.50

.375

.500

.625

.7501.001.001.251.50

1.001.001.251.501.001.001.251.50

1.001.251.501.001.251.50

.375

.500

.625

.7501.001.001.251.50

.375

.500

.625

.7501.001.001.251.50

1.001.001.251.501.001.001.251.50

1.001.251.501.001.251.50

34455666

34455666

56665666

666666

.375

.625

.7501.0001.2501.2501.5001.750

.375

.625

.7501.0001.2501.2501.5001.750

1.2501.2501.5001.7501.2501.2501.5001.750

1.2501.5001.7501.2501.5001.750

b l1 f1h

.90

.90

.90

.901.101.101.101.10

.90

.90

.90

.901.101.101.101.10

1.301.301.301.301.301.301.301.30

1.601.601.601.601.601.60

l3

.17

.22

.44

.661.321.342.205.28

.17

.22

.44

.661.321.342.205.28

1.321.342.205.281.321.342.205.28

1.342.205.281.342.205.28

16ER16ER16ER16ER16ER16ER16ER16ER

16EL16EL16EL16EL16EL16EL16EL16EL

22ER22ER22ER22ER22EL22EL22EL22EL

27ER27ER27ER27EL27EL27EL

3/8

1/2

ISO Metric – External Threading

Part No.

Dimensions in inch

Right-hand version shown

...16Q

...16QHD

...22QHD

...27QHD

GX16-1GX16-1NX22-1VX27-1

MX16-1MX16-1MX22-1MX27-1

CS3507-T09PCS3507-T09PCS4009-T15PC05012-T15P

T09P-2T09P-2T15P-2T15P-2

CSP16-T15P–––

T15P-2–––

–CHD16CHD22CHD27

–L85020-T15PL86025-T20PL86025-T20P

–S6912S7616S7616

–T15P-7T20P-7LT20P-7L

*To be ordered separately

Toolholder/Insert dimension

Anvil for insert type S

Spare parts, included in deliveryAnvil for insert type M*

Anvil screw/Key* Clamp screwClampClamp + Screw/Key Spring Key

Please check availability in current price and stock-list.

Application

5/8

InsertI.C.

17


CER 100 6-16CQHD 125 6-16CQHDCEL 100 6-16CQHD 125 6-16CQHD

CER 100 6-22CQHD 125 6-22CQHDCEL 100 6-22CQHD 125 6-22CQHD

CER 100 6-27CQHDCEL 100 6-27CQHD

CER 0375 5-16Q-SCEL 0375 5-16Q-SCER 050 5-16Q-SCEL 050 5-16Q-SCER 0625 5-16Q-SCEL 0625 5-16Q-S

1.001.251.001.25

1.001.251.001.25

1.001.00

.375**.375**.500.500.625.625

1.001.251.001.25

1.001.251.001.25

1.001.00

.375

.375

.500

.500

.625

.625

6666

6666

66

555555

1.001.251.001.25

1.001.251.001.25

1.001.00

––––––

b l1 f1h

1.2501.2501.2501.250

1.2501.2501.2501.250

1.2501.250

.630*

.630*

.630*

.630*

.750*

.750*

l3

2.002.502.002.50

2.002.502.002.50

2.002.00

.840

.840

.840

.840

.840

.840

16ER16ER16EL16EL

22ER22ER22EL22EL

27ER27EL

16ER16EL16ER16EL16ER16EL

3/8

3/8


Part No.

Dimensions in inch


..16CQHD

..22CQHD

..27CQHD

...16Q

GX16-1NX22-1VX27-1GX16-1

MX16-1MX22-1MX27-1MX16-1

CS3507-T09PCS4009-T15PC05012-T15PCS3507-T09P

T09P-2T15P-2T15P-2T09P-2

–––

CSP16-T15P

CHD16CHD22CHD27

–

L85020-T15PL86025-T20PL86025-T20P

–

S6912S7616S7616

–

T15P-7T20P-7LT20P-7L

–



Anvil for insert type S

Spare parts, included in deliveryAnvil for insert type M*

Anvil screw/Key* Clamp screwClampClamp + Screw Spring Key


ApplicationInsertI.C.

CER...CQHD

1/2

5/8

h1

1.542.861.542.86

1.542.861.542.86

2.902.90

.13

.13

.24

.24

.46

.46

CER/L-Q-S

–––

T15P-2

Key

*Club head with f1 dimension greater than shank width (b) to the backside of shank.**Club head with .12 steel under bottom of shank for l3 distance.

18


..20QHD

..26QHDKX20-2KX26-2

CS4009-T15PC05012-T15P

T15P-2T15P-2

CER 100 6-20QHD 125 6-20QHDCEL 100 6-20QHD 125 6-20QHD

CER 100 6-26QHD 125 6-26QHD 150 6-26QHDCEL 100 6-26QHD

1.001.251.001.25

1.001.251.501.00

1.001.251.001.25

1.001.251.501.00

6.06.06.06.0

6.06.06.06.0

1.2501.5001.2501.500

1.2501.5001.7501.250

h l1 f1b

1.3001.3001.3001.300

1.8001.8001.8001.800

l3

1.542.861.542.86

1.542.865.281.54

20..20.. 20...20..

26..26..26..26..

1/2

5/8

CER/L...QHD


Part No.

Dimensions in inch



Anvil for insert type K

Spare parts, included in deliveryAnvil screw/Key*




CHD22CHD27

L86025-T20PL86025-T20P

S7616S7616

T20P-7T20P-7

Clamp Clamp Screw Spring Key

19

Threading – Toolholders, internal

SNR/L CNR/LSNR...09A

SNR 000750 55-09A

SNR 000375 40-11 00050 55-11SNL 000375 40-11 00050 55-11

SNR 000625 60-16SNL 000625 60-16

SNR 00075 70-22SNL 00075 70-22

Heavy metal shank SNR 000375 60-11-H

SNR 000625 80-16-H

SNR 000750 10-22-H

CNR 00075 7-16 00100 8-16 00125 10-16 00150 12-16 00175 14-16 00200 14-16CNL 00075 7-16 00100 8-16 00125 10-16 00150 12-16 00175 14-16 00200 14-16

CNR 00075 10-16H

.40

.50

.60

.50

.60

.75

.75

.90

.90

.45

.75

.90

.951.151.41.72.02.2.951.151.41.72.02.2

.95

.40

.45

.50

.45

.50

.62

.62

.85

.85

.40

.62

.85

.801.01.21.51.82.0.801.01.21.51.82.0

.80

.750

.375

.500

.375

.500

.625

.625

.750

.750

.375

.625

.750

.7501.0001.2501.5001.7502.000.7501.0001.2501.5001.7502.000

.750

5.5

45.54

5.5

66

77

6

8

10

78101214147810121414

10

.750

–1.25

–1.25

1.501.50

2.002.00

–

1.50

2.00

––––––––––––

–

dmm l1Min. Hole

Dia.

.25

.22

.25

.22

.25

.44

.44

.66

.66

.40

.80

1.32

0.661.543.005.947.8810.78.661.543.005.947.8810.78

1.65

09NR

11NR11NR11NL11NL

16NR16NL

22NR22NL

11NR

16NR

22NR

16NR16NR16NR16NR16NR16NR16NL16NL16NL16NL16NL16NL

16NR

7/32

1/4

3/8

1/2

Toolholders for S-inserts

Part No.

Dimensions in inch


SN...09ASN...11SN...16SN...22

CN...16

C02205-T07PC02506-T07PC03508-T15PC04011-T15P

–

T07P-2T07P-2T15P-2T15P-2

–

––––

GX16-1

––––

MX16-1

––––

CS3507-T09P

––––

T09P-2

––––

CSP 16-T15P

––––

T15P-2

SEAL20 (20 mm)–––

–



Locking screw/Key

Spare parts, included in deliveryAnvil for insert type S

Clamp + Screw/KeyAnvil screw/Key*Anvil for insert type M*

Coorlant adapter*


Application

1/4

3/8

1/2

3/8

l3 f1Min. Hole

Dia. Mod.*InsertI.C.

.200

.285

.315

.285

.315

.406

.406

.492

.492

.285

.406

.492

.520

.650

.780

.9001.031.15.520.650.780.9001.031.15

.800

*Holder can be modified to accomodate smaller bore size.

20


CNR/L

CNR 00100 8-22 00125 10-22 00150 12-22 00175 14-22 00200 14-22 00250 16-22CNL 00100 8-22 00125 10-22 00150 12-22 00175 14-22 00200 14-22 00250 16-22

CNR 00150 12-27 00175 14-27 00250 16-27CNL 00150 12-27 00175 14-27 00250 16-27

CNR 00200 T22APIHD 00250 T22APIHDCNL 00200 T22APIHD 00250 T22APIHD

CNR 00200 T27APIHD 00250 T27APIHDCNL 00200 T27APIHD 00250 T27APIHD

1.201.501.802.102.302.801.201.501.802.102.302.80

1.902.202.901.902.202.90

1.601.601.601.60

1.601.601.601.60

1.101.201.501.802.002.501.101.201.501.802.002.50

1.51.82.51.51.82.5

––––

––––

1.0001.2501.5001.7502.0002.5001.0001.2501.5001.7502.0002.500

1.5001.7502.5001.5001.7502.500

2.0002.5002.0002.500

2.0002.5002.0002.500

8101214141681012141416

121416121416

12121212

12121212

––––––––––––

––––––

5.005.005.005.00

5.005.005.005.00

dmm l1Min. Hole

Dia.

1.543.085.947.8810.7819.581.543.085.947.8810.7819.58

5.947.8819.585.947.8819.58

10.7810.7810.7810.78

19.5819.5819.5819.58

22NR22NR22NR22NR22NR22NR22NL22NL22NL22NL22NL22NL

27NR27NR27NR27NL27NL27NL

22NR22NR22NL22NL

27NR27NR27NL27NL

1/2

5/8


Part No.

Dimensions in inch


...22

...27

...22APIHD

...27APIHD

––

MX22-1MX27-1

––

S7616S7616

CS4009-T15PC05012-T15P

CS4009-T15PC05012-T15P

T15P-2T15P-2

T15P-2T15P-2

T15P-2T25P-7

––






Application

1/2

l3 f1Min. Hole

Dia. Mod.*InsertI.C.

.710

.840

.9701.091.211.46.710.840.9701.091.211.46

1.021.151.521.021.151.52

.880

.880

.880

.880

.900

.900

.900

.900

CNR...APIHD

5/8

Clamp ClampScrew

Spring Key

NX22-1VX27-1

NX22-1VX27-1

––

T20P-7LT20P-7L

––

CHD22CHD27

CSP 22-T15PCSP 27-T25P

––

––

L86025-T20PL86025-T20P


21


CNR/L

..20

..26KX20-2KX26-2

CS4009-T15PC05012-T15P

T15P-2T15P-2

CSP 22-T15PCSP 27-T25P

T15P-2T25P-2

CNR 00100 8-20 00125 10-20 00150 12-20CNL 00100 8-20 00125 10-20

CNR 00125 10-26 00150 12-26 00175 14-26 00200 14-26 00250 16-26CNL 00125 10-26 00150 12-26 00175 14-26

1.401.702.001.401.70

2.002.102.302.503.002.002.102.30

1.401.401.601.401.40

1.601.601.802.002.501.601.601.80

1.0001.2501.5001.0001.250

1.2501.5001.7502.0002.5001.2501.5001.750

dmm l1 l3Min Hole

Dia.

8.010.012.08.010.0

10.012.014.014.016.010.012.014.0

f1

2.203.085.502.203.08

3.085.508.7410.7819.583.085.508.74

20..20..20..20..20..

26..26..26..26..26..26..26..26..

1/2

5/8

–––––

––––––––

.810

.9401.06.810.940

1.061.181.311.431.681.061.181.31

Toolholders for K-inserts



Anvil for inserttype K

Spare parts, included in deliveryAnvil screw/Key* Clamp + Screw

Part No.

Dimensions in inch




Min HoleDia. Mod.*


Key

22

Seco-Capto™, Threading – Toolholders, external

CER/L..HD CER/L..CHD

C4-CER-27050-16HDC4-CEL-27050-16HD

C4-CER-27050-22HDC4-CEL-27050-22HD

C5-CER-35060-16HDC5-CEL-35060-16HD

C5-CER-35060-22HDC5-CEL-35060-22HD

C6-CER-45065-16HDC6-CEL-45065-16HD

C6-CER-45065-22HDC6-CEL-45065-22HD

C6-CER-45065-27HDC6-CEL-45065-27HD

C4-CER-27050-16CHDC4-CEL-27050-16CHD

C4-CER-27050-22CHDC4-CEL-27050-22CHD

C5-CER-35060-16CHDC5-CEL-35060-16CHD

C5-CER-35060-22CHDC5-CEL-35060-22CHD

C6-CER-45065-16CHDC6-CEL-45065-16CHD

C6-CER-45065-22CHDC6-CEL-45065-22CHD

C6-CER-45065-27CHDC6-CEL-45065-27CHD

C6-CER-18100-16HDC6-CER-16100-22HDC6-CER-12100-27HD

1.571.57

1.571.57

1.971.97

1.971.97

2.482.48

2.482.48

2.482.48

1.571.57

1.571.57

1.971.97

1.971.97

2.482.48

2.482.48

2.482.48

2.48 2.482.48

1.061.06

1.061.06

1.381.38

1.381.38

1.771.77

1.771.77

1.771.77

1.061.06

1.061.06

1.381.38

1.381.38

1.771.77

1.771.77

1.771.77

.709

.630

.472

1.971.97

1.971.97

2.362.36

2.362.36

2.562.56

2.562.56

2.562.56

1.971.97

1.971.97

2.362.36

2.362.36

2.562.56

2.562.56

2.562.56

3.943.943.94

D5m l1f1

0.880.88

0.880.88

1.761.76

1.761.76

3.303.30

3.303.30

3.303.30

0.880.88

0.880.88

1.761.76

1.761.76

3.303.30

3.303.30

3.303.30

3.533.533.53

16..16..

22..22..

16..16..

22..22..

16..16..

22..22..

27..27..

16..16..

22..22..

16..16..

22..22..

16..16..

22..22..

27..27..

16..22..27..

3/8

1/2

1/2

1/2

3/8

1/2

3/8

3/8

3/8

1/2

5/8

3/8

1/2

5/8

3/81/25/8


Part No.

Dimensions in inch


Application

-16-22-27

GX16-1NX22-1VX27-1

MX16-1MX22-1MX27-1

CS3507-T09PCS4009-T15PC05012-T15P

T09P-2T15P-2T15P-2

CHD16CHD22CHD27

L85020-T15PL86025-T20PL86025-T20P

S6912S7616S7616

T15P-7T20P-7T20P-7




Clamp Anvil screw/Key*Anvil for insert type M*


Clamp screw Spring Key

InsertI.C.

C6-CER-18100-16HDC6-CER-16100-22HDC6-CER-12100-27HD

CER..HDMulti-taskMachining

MTM

23

Seco-Capto™, Threading – Toolholders, internal

SNR/L CNR/L CNR/L..C



SNR...-16 -16 / -16C -22 / -22C

-GX16-1NX22-1

-MX16-1MX22-1

-CS3507-T09PCS4009-T15P

-T09P-2

-

C03508-T15PCSP16-T15PCSP22-T15P

T15P-2T15P-2T15P-2






C4-SNR -10060-16C4-CNR -14060-16 -17070-16 -20090-16C4-CNL -14060-16 -17070-16 -20090-16C4-CNR -22090-22C4-CNL -22090-22C5-CNR -14060-16 -17070-16 -20090-16C5-CNL -14060-16 -17070-16 -20090-16C5-CNR -18070-22 -22090-22C5-CNL -18070-22 -22090-22C6-CNR -17075-16 -20090-16 -24105-16C6-CNL -17075-16 -20090-16 -24105-16C6-CNR -18075-22 -22090-22 -26105-22C6-CNL -18075-22 -22090-22 -26105-22C4-CNR -14060-16CC4-CNL -14060-16CC5-CNR -17070-16C -20090-16CC5-CNL -17070-16C -20090-16CC5-CNR -18070-22CC5-CNL -18070-22CC6-CNR -20090-16C -24105-16CC6-CNL -20090-16C -24105-16CC6-CNR -22090-22C -26105-22CC6-CNL -22090-22C -26105-22C

0.630.790.981.260.790.981.261.261.260.790.981.260.790.981.260.981.260.981.260.981.261.570.981.261.570.981.261.570.981.261.570.790.790.981.260.981.260.980.981.261.571.261.571.261.571.261.57

1.571.571.571.571.571.571.571.571.571.971.971.971.971.971.971.971.971.971.972.482.482.482.482.482.482.482.482.482.482.482.481.571.571.971.971.971.971.971.972.482.482.482.482.482.482.482.48

0.390.540.640.780.540.640.780.840.840.540.640.780.540.640.780.700.840.700.840.640.780.940.640.780.940.700.841.000.700.841.000.540.540.640.780.640.780.700.700.780.940.780.940.841.000.841.00

2.362.362.763.542.362.763.543.543.542.362.753.542.362.753.542.763.542.763.542.953.544.132.953.544.132.953.544.132.953.544.132.362.362.763.542.763.542.752.753.544.133.544.133.544.133.544.13

1.461.421.892.721.421.892.722.722.721.421.852.681.421.852.681.852.681.852.682.092.683.152.092.683.152.092.683.152.092.683.151.421.421.852.681.852.681.851.852.683.152.683.152.683.152.683.15

D1 f1Dmminl1D5m0.750.941.141.420.941.141.421.501.500.941.141.420.941.141.421.181.501.181.501.141.421.731.141.421.731.181.501.811.181.501.810.940.941.141.421.141.421.181.181.421.731.421.731.501.811.501.81

l30.660.660.881.320.660.881.321.321.321.101.321.761.101.321.761.321.981.321.982.422.423.302.422.423.302.422.643.302.422.643.300.660.661.321.761.321.761.321.321.763.301.763.302.643.302.643.30

16..16..16..16..16..16..16..22..22..16..16..16..16..16..16..22..22..22..22..16..16..16..16..16..16..22..22..22..22..22..22..16..16..16..16..16..16..22..22..16..16..16..16..22..22..22..22..

3/8

1/2

3/8

1/2

Part No.

Dimensions in inch


3/8

1/2

3/8

1/2

1/2

3/8

24

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

20

21

22

BHN

SecoMaterial

Group No.

kc 1.1x 1000Lbf/in2 mc

<135

120 <210

135 <165

165 <210

210 <270

270 <360

>360

196

218

218

247

276

290

421

.21

.22

.25

.24

.24

.24

.22

254

276

297

312

.22

.20

.20

.20

167

178

196

213

.22

.25

.28

.30

101

101

377

479

210

.25

.27

.24

.24

.23

Workpiece materials – Seco material groups

Steel

Stainless steels

Cast iron

Other materials

Very soft low-carbon steels.Low carbon and purely ferritic mild steels.

Free cutting steels,excluding stainless steels.

Machine steels and carbon steels.Plain carbon steels with low to medium carbon content (< 0.5%C).

High-carbon and ordinary low-alloy steels. Medium-hard quenching and tempering steels. High-carbon steels (> 0.5%C).Ferritic and martensitic stainless steels.

Normal tool steels.Harder quenching and tempering steels.Martensitic stainless steels.

Difficult tool steels.High-alloy, high-hardness steels.Martensitic stainless steels.

Difficult high-strength, high-hardness steels.Hardened steels from material groups 3–6.Martensitic stainless steels.

Easy-cutting stainless steels.Free-cutting stainless steels. Calcium-treated stainless steels.

Moderately difficult stainless steels.Austenitic and duplex stainless steels.

Difficult stainless steels.Austenitic and duplex stainless steels.

Very difficult stainless steels. Austenitic and duplex stainless steels.

Moderately hard cast iron.Grey iron.

Low-alloy cast iron.Malleable cast iron. SG iron.

Moderately difficult alloy cast iron.Moderately difficult malleable iron. SG iron.

Difficult high-alloy cast iron. Difficult malleable iron. SG iron.

Non-ferrous alloys.Aluminum with <16% Si.Brass, zinc and magnesium.

Non-ferrous alloys.Aluminum with >16% Si.Aluminum, bronze and copper-nickel.

Nickel-, cobalt- and ferrous superalloys with hardness of <30 HRc.Incoloy 800 and Inconel 601, 617 and 625. Monel 400.

Nickel-, cobalt- and ferrous superalloys with hardness of >30 HRc.Inconel 718 and 750-X and Incoloy 925, Monel K-500.

Titanium-based alloys.Ti-6Al-4V.

kc1.1-values with 0 degree effective cutting rake angle. For other rake angles, reduce the kc1.1-value by 1% for every degree increase in the cutting rake angle and vice versa. Bear in mind that the BHN-value is only an aid in the selection of the material group when the material has been worked by rolling, drawing, heat treatment or other methods that increase the strength of the material.

ARGENTINA Seco Tools S.A. Tel. 54 11 4892-0060 Fax 54 11 4723-8600. AUSTRALIA Seco Tools Australia Pty. Ltd. Tel. 1300 55 7326 Fax 1300 65 7326. AUSTRIA Seco Tools GmbH Tel. (2253) 21040 Fax (2253) 21040-11. BELGIUM S.A. Seco Tools Benelux N.V. Tel. (02) 389 09 60 Fax (02) 389 09 89. BOSNIA See Solvenia. BRAZIL Seco Tools Ind. Com. Ltda. Tel. (0xx15) 2101-8631/34 Fax (0xx15) 2101-8605. BULGARIA See Sweden. CANADA Seco Tools Canada Inc. Tel. (905) 693 1780 Fax (905) 693 1788. CHINA Seco Tools (Shanghai) Co. Ltd. Tel. + 86 - 21- 5426 5500 Fax + 86-21-64855685. COLOMBIA Rexo Tools Tel.(57 1)-6606030/31/32/33/35/37 Fax (57 1)-3110026. CROATIA See Slovenia. CZECH REPUBLIC Seco Tools CZ s.r.o. Tel. 530 500 811 Fax 530 500 810. DENMARK Seco Tools A/S Tel. 43 44 76 00 Fax 43 44 50 30. ECUADOR See Sweden. FINLAND Seco Tools Oy Tel. (09) 2511 72 00 Fax (09) 2511 72 01. FRANCE Seco Tools France Tel. 0825 826 379 Fax 02 48 67 27 05, Seco EPB Tel. 03 88 71 38 89 Fax 03 88 70 98 98. GERMANY Seco Tools GmbH Tel. (0211) 2401-0 Fax (0211) 2401275. GREECE Athens Mechanica Tel. 2105231284-5 Fax 2105231286. HONGKONG Seco Tools (Shanghai) Co. Ltd. Tel. 86- 21 - 5426 5500 Fax +86 - 21 - 64855685. HUNGARY Seco Tools KFT Tel. (36-1) 267-6720 / 383-6568 Fax (36-1) 267- 6721. INDIA Seco Tools India (P) Ltd. Tel. 02137-667300 Fax 02137-667430. INDONESIA See Singapore. ITALY Seco Tools Italia S.p.A. Tel. 031-978111 Fax 840-000938. JAPAN Seco Tools Japan. K.K. Tel. 03-3239- 3071 Fax 03-3230-4955. MACEDONIA See Slovenia. MALAYSIA Seco Tools Malaysia Sdn Bhd Tel. 03-90591833 Fax 03-90594833. MEXICO Seco Tools de Mexico Tel./Fax 011-52-81-83-5063-11. NETHERLANDS Seco Tools Benlux N.V. Tel. 0183-636600 Fax 0183- 6606. NEW ZEALAND Seco Tools New Zealand Ltd. Tel. 09-415 8441 Fax 09-415 8442. NORWAY Seco Tools A/S Tel. 67927300 Fax 67927302. PHILIPPINES See Singapore. POLAND Seco Tools (Poland) Sp. z.o.o. Tel. (0-22) 637 53 86/85 Fax (0-22) 637 53 84. PORTUGAL Seco Tools Portugal, Lda. Tel. 256 371 650 Fax 256 371659. ROMANIA Seco Tools Romania S.R.L. Tel 40 268 414 723 Fax 40 268 476 772. RUSSIA Seco AB Moscow Representative Office. Tel +7(495)-680-1322 Fax +7(495)-680 6241. SERBIA AND MONTENEGRO See Slovenia. SINGAPORE Seco Tools (S.E.A.) Pte. Ltd. Tel. (65) 68 41 28 02 Fax (65) 68 41 28 01. SLOVAKIA Seco Tools SK s.r.o. Tel. 421 33 55 13 537, 421 33 53 41 911 Fax 421 33 55 13 538. SLOVENIA Seco Tools SI d.o.o. Tel. 003 86 2 450 23 40 Fax 00386 2 450 23 41. SOUTH AFRICA Seco Tools S.A. (Pty) Ltd. Tel. (011) 36 22 660 Fax 011 362-1893. SOUTH KOREA Seco Tools Korea Ltd. Tel. 041 622 -9785 to 9 Fax 041 622-9784. SPAIN Seco Tools España S.A. Tel. 934 745 533 Fax 934 745 550. SWEDEN Seco Tools AB Tel. 223 400 00 Fax 223 718 60 Telex 7510. SWITZERLAND Seco Tools AG Tel. 0041-32 332 78 78 Fax 0041-32 332 78 79. TAIWAN Seco Tools Taiwan Tel. 02-26577918 Fax 02-26579461. THAILAND Seco Tools Thailand Tel. 02-7467 801 Fax 02-7467 802. TURKEY Seco Tools A.S. Tel. +90 (216) 569 74 00 Fax +90 (216) 575 73 83. UKRAINE Seco Tools Ukraine Tel. (056) 790 05 44 Fax. (056) 790 05 43 UNITED KINGDOM Seco Tools (U.K.) Ltd. Tel (01789) 764341 Fax (01789) 761170. USA Seco Tools Inc. Tel. 248-528-5200 Fax 248-528-5250.

For technical assistance, call: 1-800-832-8326

To find an Authorized SECO Distributor near you, please refer to the Distributor Locator on our website: www.secotools.com

P-0808-5000Copyright © 2008 Seco Tools Inc.

GT08-203Printed in USA. All rights reserved.

2805 Bellingham Drive, Troy, MI 48083

2008 Thread Turning

Documents

Transcript of 2008 Thread Turning