2008 International ANSYS Conference · 2008 International ANSYS Conference ... LOADS ON GRP SUBSEA...
Transcript of 2008 International ANSYS Conference · 2008 International ANSYS Conference ... LOADS ON GRP SUBSEA...
-
2008 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary
2008 International ANSYS Conference
FEM AND FSI SIMULATIONS OF IMPACT LOADS ON GRP SUBSEA COMPOSITE COVERS
Kjetil Rognlien, MScTechnical ConsultantEDR AS, Norway
-
2008 ANSYS, Inc. All rights reserved. 2 ANSYS, Inc. Proprietary
Presentation Agenda
Background Purpose of study FSI overview Implementation of FSI in ANSYS Specific FSI case Results Conclusion
-
2008 ANSYS, Inc. All rights reserved. 3 ANSYS, Inc. Proprietary
Background
Current simulation methods to analyze a products behavior in water is to a great extent based onsimplified boundray conditions Dynamic events often modeled as equivalent
static Simplifications made by time, not technology,
concerns Coupled physics effects are often crucial
This raises a need for new simulation methods Fluid Structural Interaction
-
2008 ANSYS, Inc. All rights reserved. 4 ANSYS, Inc. Proprietary
Purpose of Study
- Examine different results and effects going from an equivalent static to a dynamic impact simulation model
- Study the theory and mechanics of Fluid Structural Interaction (FSI)
- Study the implementation of FSI in ANSYS
- Create a coupled FSI model to measure the damping effects of the water surrounding a composite plate during impact
-
2008 ANSYS, Inc. All rights reserved. 5 ANSYS, Inc. Proprietary
Fluid Structural Interaction
Main challenges: FEA and CFD different physical problems Solved by different solvers and techniques Must establish communication between solvers
Applications: Aerospace industry Medical, blood flow through arteries Subsea pipelines, risers and similar Subsea protection equipment
FEM Deflection
CFD Pressure
Convergence?
-
2008 ANSYS, Inc. All rights reserved. 6 ANSYS, Inc. Proprietary
How is this modelled in Ansys?
Model the structural and fluid region with correct relative placement
Mesh the structure and fluid separately (Ansys and CFX)
Specify what surfaces should be FSI interface surfaces on both the structural and fluid geometry
Include the simulation setup for the Ansys solver in CFX
-
2008 ANSYS, Inc. All rights reserved. 7 ANSYS, Inc. Proprietary
contd.
Specify equal time steps and time domain for Ansys and CFX
Solution process: Run first iteration in Ansys Map displacement results from structural interface to CFD interface Calculate fluid flow and resulting pressure on interface in CFX Use pressure from CFX as new boundary condition in Ansys Repeat steps 2-4 until displacements have converged
Smaller time steps are needed for low stiffness structures
Everything was done within the Workbench environment
-
2008 ANSYS, Inc. All rights reserved. 8 ANSYS, Inc. Proprietary
FSI Model Impact on Fixed Plate
Test case: A simple plate structure, partially submerged in
water, subjected to an impact from a dropped object
Three approaches to finding the maximum allowable impact energy:
-
2008 ANSYS, Inc. All rights reserved. 9 ANSYS, Inc. Proprietary
FSI Model, contd.
Static: Apply force to an impact area Use the resulting deflection to calculate stiffness energy Assume all of the impact energy is taken up as stiffness
energy
Dynamic (Impact): Model plate and impactor as separate parts Give the impactor initial velocity Create a contact pair between the impactor and plate
-
2008 ANSYS, Inc. All rights reserved. 10 ANSYS, Inc. Proprietary
FSI Model, contd.
Full Scale FSI: Same as dynamic, but include CFD mesh of water Set up a coupling between the FEA solver and the CFD
solver
-
2008 ANSYS, Inc. All rights reserved. 11 ANSYS, Inc. Proprietary
Results Impact VS Static
Stiffness energy less than impact energy at any given time Other factors than absorbed stiffness energy contributed to
stresses: Varying contact area Local stress concentrations Vibrations in the cover plate during impact Dynamic stress distributions and stress peaks
For the element types examined; Solid186, quadratic shape functions Shell181, linear shape functions SolidShell190, linear shape functions
the impact method showd an average increase in the strength estimate of about 23%, but with relatively high variations
-
2008 ANSYS, Inc. All rights reserved. 12 ANSYS, Inc. Proprietary
Energies During Impact
-
2008 ANSYS, Inc. All rights reserved. 13 ANSYS, Inc. Proprietary
Pressure Between Impactor and Plate
-
2008 ANSYS, Inc. All rights reserved. 14 ANSYS, Inc. Proprietary
Impact animation 1
-
2008 ANSYS, Inc. All rights reserved. 15 ANSYS, Inc. Proprietary
Impact animation 2
-
2008 ANSYS, Inc. All rights reserved. 16 ANSYS, Inc. Proprietary
Results FSI VS Impact Model
FSI simulations showed a considerable damping effect compared to a similar plate in air
Much of the vibration and peak stresses in the plate were damped out
Compared to the impact in air, the FSI model showed an increased strength estimate of about 20%
Strength estimate increased 48% from static model
-
2008 ANSYS, Inc. All rights reserved. 17 ANSYS, Inc. Proprietary
Results FSI VS Impact contd.
Displacements were not significantly decreased, but the stress peaks were lowered due to smoother movement
Parameter Structural FSI %ReductioninFSI
MaxDisplacementinplate[mm] 56,35 54,47 1,84
MaxTensionalStress[MPa] 675 530 21,5
MaxCompressiveStress[MPa] 400 325 18,8
MaxTsaiWuIndex 1,02 0,617 39,5
MaxFPFFIndex 0,722 0,566 21,6
Simulationtime Steel Composite
Structural[s] 324 2606
FSI[s] 11957(Laptop) 75095(Laptop)
The FSI Simulations were time-consuming, but able to run on a laptop
-
2008 ANSYS, Inc. All rights reserved. 18 ANSYS, Inc. Proprietary
Stiffness Energies, FSI VS Structural
-
2008 ANSYS, Inc. All rights reserved. 19 ANSYS, Inc. Proprietary
FSI animation 1
-
2008 ANSYS, Inc. All rights reserved. 20 ANSYS, Inc. Proprietary
FSI animation 2
-
2008 ANSYS, Inc. All rights reserved. 21 ANSYS, Inc. Proprietary
Advantages and Disadvantages
Impact model VS static: Advantages:
Physically closer to real life Includes vibration and stress peaks Shows dynamic response with deformation and stress
distribution Lowers maximum stress values, increasing strength estimate
Disadvantages: More work required to set up the analysis Run time and result file size greatly increased Introduction of non-linear contacts may make convergence
hard to achieve Harder to achieve consistent results with respect to element
type
-
2008 ANSYS, Inc. All rights reserved. 22 ANSYS, Inc. Proprietary
Advantages and Disadvantages
FSI model VS impact model: Advantages:
Includes coupled effects between water and structure Results in a smoother deformation pattern during impact Reduces the local stress concentrations Lowers maximum stress values, hence increasing strength
estimate Disadvantages:
More work required to set up analysis Run time significantly increased User needs basic knowledge about the physics of fluids More simulation parameters on CFD side introduce potential
sources of error, and convergence problems
-
2008 ANSYS, Inc. All rights reserved. 23 ANSYS, Inc. Proprietary
In Conclusion
FSI simulation showed great increases in strength estimates
Consistent with initial assumption of damping in water
Enables more efficient design of protection equipment
Money can be saved on materials, production and installation
-
2008 ANSYS, Inc. All rights reserved. 24 ANSYS, Inc. Proprietary
Thank you!
Any Questions?
FEM AND FSI SIMULATIONS OF IMPACT LOADS ON GRP SUBSEA COMPOSITE COVERSPresentation AgendaBackgroundPurpose of StudyFluid Structural InteractionHow is this modelled in Ansys?contd.FSI Model Impact on Fixed PlateFSI Model, contd.FSI Model, contd.Results Impact VS StaticEnergies During ImpactPressure Between Impactor and PlateImpact animation 1Impact animation 2Results FSI VS Impact ModelResults FSI VS Impact contd.Stiffness Energies, FSI VS StructuralFSI animation 1FSI animation 2Advantages and DisadvantagesAdvantages and DisadvantagesIn ConclusionSlide Number 24