2003 Fall Cataloguen.hsix.com/brochure/010346.pdf · Electro-Mechanical Drives, Servo Driven Rotary...

707 Skokie Blvd., Suite 100 • Northbrook, IL 60062Phone (847) 509-9379 • Fax: (847) 509-9380

E-mail : [email protected]

LIBERTYMACHINERY COMPANY

Fall 2003 Catalog

Agie Model 120 HSS “Agiecut”, 31” x 22” x 9.8” MaximumWork Piece, Agiematic CF20 Control, Auto Threading, MMD

Generator. #12518

Muratec Model MW-20/G Twin Spindle CNC 4-Axis Turning Machinewith Gantry Loader, Part Turnaround and Unloader, (2) 8” Chucks,Fanuc 16TTA Control, (2) Tool Setters, Tool Shift, Coolant Filtration

System. #12487

75 Ton Minster Model 7SS“Die-Matic”, 5” Stroke, 17”Shut Height, 3-3/4” RamAdjustment, 45 SPM, 36” x24” Bed Area. #12289 3-1/2”, Pines, Model 2, Mandrel

Extractor, Dial-A-Bend, Pressure DieAssist. #11966

43” O-M Ltd. Omega60, Fanuc 18T, 12Position ATC, 59”

Swing, 75 HP, 600RPM, Coolant System,

#12817

New 1995

New 1974

New 1997

New 1986

New 1995

CHECK OUTOUR VIRTUAL

REALITYWAREHOUSE

TOUR!!Not Actual

Photo

Automatic Screw Machines•2” x 6 Spindle Acme Gridley, Model RB6, 6-CRS Slides, Int. Pocket Sld.,Universal Threading, Hinge Drill Hldr. Tooling, Chip Conveyor. #1844

2-5/8” x 8 Spindle Acme Gridley, Model RB8, 6-Slides, Air Pickoff,Backfinish, Universal Threading, Recessing, Reaming, Stock

Stand & Reel, Tooling. #1843

Benders, Pipe, Tube & Bar

•3-1/2”, Pines, Model 2, Mandrel Extractor, Pressure Die Assist.(New 1972) #11965

•3-1/2”, Pines, Model 2, Mandrel Extractor, Dial-A-Bend, Pressure DieAssist. (New 1974) #11966 SEE PHOTO ON FRONT COVER

Benders, Pipe, Tube & Bar, N/C & CNC

•2” Eaton Leonard Model VB 200 SE, 3-Axis, Premier Touch Screen.(New 1995-97) (3) #12763, #12764, #12765

Boring Mills, Horizontal, Table Type

Boring Mills, Horizontal, Table Type, N/C & CNC

5.12”, Toshiba Shibaura Model BPN13(P7), 4-Axis, X=150”, Y-86”,Z=58”, 20” Spindle Travel, Fanuc 6MB, Tool Changer. #2392

Boring Mills, Vertical

118”/216.5”, Toshiba ModelTSS30/55A, High Column,

Openside, 118” 4-Jaw, 216” Max.Swing, 109” Max. Under Rail,

Side Head, Tracer Attachment,In/MM Threading, D.R.O.#2387

1-1/4”, Conrac Model 110Synchrobend, Plane-A-BendCarriage, Mandrel Extractor,

Tooling. #12219

3/4" Pines Model ENC-020, MandrelExtractor, Retrofit with New Dimensions

CNC. #11981

2

New 1978

New 1975

Retrofit 1996New 1980

New 1986

5”, Cincinnati Gilbert, Model JT, 72”Vertical, 108” Cross, 96” Longitudinal, 60”x 120” Table, #50 CAT Taper, Power Draw

Bar, Digital Read Out. #1049

PRICED TO SELL!!

Surplus Machinery Sales Coordinators:Please add us to your bidders list!

We are cash buyers of your surplus machinery.



Brakes, Press, Hydraulic, Tons

225 Ton, American HerculesModel 225-12, 12’ Overall,

10’6” Between Housings, 36”Rear Operated Manual BackGauge, Flush Floor. #9269

Broaches, Vertical, Surface, Single Ram

4 Ton Broaching MachineSpecialties “Cruiser”, 24” Stroke,Hi-Speed, Allen Bradley PLC, Tilt

Table. #12564

Chucks•24” Rohm Model OW-404678-P5671, Power Draw Bar, 3-Jaw, AcmeSerrated. #1335

•15” Cushman Model 20 675 15 A11A, Combination 2-3 Jaw, SelfCentering Power Chuck, AM STD Serrated Master Jaws, Draw Tube.

•12” Logansport Model S53501, 3-Jaw Air Chuck, A5, Tongue andGroove.

•24” Weld Chuck, 3-Jaw, 4-1/2” Thru Hole, Manual, Tongue and Groove.

Die Handlers/Flippers

Broaches, Vertical, Tri-Way•4 Ton American Model TR4-24 Tri-Way, 24” Stroke, Updated Hydraulics& Electrics. (Rebuilt & Retrofit 1994) #10821

Drills•Allen Model VCDW, Single Spindle, 24” Throat, 3 HP, 50-1800 RPM, #4MT,21” x 46” Table, Back Geared, M.D. Coolant, Power Feed. (New 1972) #11792

2-Spindle 26” Leland GiffordModel 2LMS-26, 150-1800

RPM, #2MT, 25” x 48” Table,Back Geared, Coolant, Hand

Feed. #1064

3

New 1980

New 1989

135 Ton, Cincinnati Model 135AF10, 12’ Overall, 10’6” BetweenHousings, 3-Axis Back Gauge, Autocrown. #9892

New 1999

Boring Mills, Vertical, CNC•43” O-M Ltd. Omega 60, Fanuc 18T, 12 Position ATC, 59” Swing, 75 HP,600 RPM, Coolant System, (New 1995) #12817 SEE PHOTO ON FRONTCOVER

3,000 Lb. HansfordModel 1017, 55” x 24”

Platen Area, PowerElevation. #9668

Drills, Gun

Eldorado-Mega 3/4" x 30” Stroke, Model M75-1041 (30T)Ballscrew, DC Servo Drive, Mega F-18 Hi-Pressure Coolant

System, Tooling. #12833

New 1980

New 1986

New 1967

Not ActualPhoto

GREAT PRICE!



Micro-Hole, Billeter, .29mmMinimum Hole Size,

Graduated Angle Setting Slideand Offset Slide, Adjustable

Plane Workhead, ShuttleWorkpiece Slide, Optics,

Tooling. #9727

Drills, Radial•3’ x 9” Carlton Model OA, #4MT, 5 HP, Tapping, Box Table, T-Base. #746

4” x 13” Ikeda ModelRM1300, #5MT, 5 HP,

Tapping, Box Table,Coolant. #2416

4’ x FOOTBURT Jack KnifeType, #3MT, 2 HP,1140RPM, 1” Drill Capacity,Baldor Dynamic Brake,

Box Table. #9903

6’ x 19” Carlton Model4A, #6 MT, 40 HP, 10-1000 RPM, Tapping,Box Table, Coolant.

#12140

Electric Discharge Machines, N/C & CNC•Agie Model 120 HSS “Agiecut”, 31” x 22” x 9.8” Maximum Work Piece,Agiematic CF20 Control, Auto Threading, MMD Generator. (New 1995)#12518 SEE PHOTO ON FRONT COVER

Facing & Centering Machines

6” x 51” Hey, Model 3, Air Vises, 10 HP, 67-1430 RPM Spindle SpeedRange, Standard Feed Rates .001-.018 IPR, Automatic Work Cycling

Controls, Change Gears, Tooling. #2356

6-1/2” x 111” Hey Model 3, Air Vises, 15 HP, 81-1180 RPM SpindleSpeed Range, Standard Feed Rates .001 -.018 IPR, Automatic Work

Cycling Controls, Change Gears, Tooling. #11389

4

Drills, Multiple Spindle•21-Spindle Moline Model HD-68 “IN-LINE”, 40 HP, Rail Feed, #4 MT,Adjustable Spindles, Box of Gears & Spacers. #2462

•24-Spindle Natco Model G316B Head Feed, 2-Speed Neck, 15 HP,Jump & Step Drilling, Tapping, Many Spindles & Arms. (New 1980) #1414

•28-Spindle Deka Model HRG1222-28 Table Feed, 7.5 HP, Tapping,Many Spindles & Arms. (New 1966) #1396

Drilling & Tapping Machines, (Single Spindle)•28” Giddings & Lewis Bickford Model 978 Drilling Machine, 10 HP, #5MT, 75-1800 RPM, Power Feed, Spindle Reverse for Tapping. (New 1978) #708

Drills, Miscellaneous

New 1980

New 1986

New 1988

New 1976

New 1978

New 1981

GREAT PRICE

MAKE OFFER

!!

Gear Cutter Sharpeners

Barber Colman Model 6-5Automatic Hydraulic Hob

Sharpener and Form ReliefCutter Sharpener, (11) Index

Plates, Automatic Built inWheel Dresser. #9226

Gear Deburrers

(3) Redin Model 10, Deburrsand Chamfers Spur & Helical

Gears, Splines, Cams andSprockets, Auto Cycle, (3)Universal Spindles, Pratt

Burned 6” Air Self CenteringChuck, Allen Bradley SLC

500 Control, Cartridge TypeDust Collector, Portable.

#9745, #9746, #9747

Redin Model 18, Auto-Cycle,2-Universal Brush Type

Spindles, Dust Collector,Cycle Timer. #2326

Gear ShaperGear ShaperGear ShaperGear ShaperGear Shapersssss

Gear Testers

ITW Model 3424B-3C VariableInvolute Measurer, Extra Height72” c.c. and 24” Steady Rest 8”

Diameter Cap. Model 1606Rectilinear Recorder. HeidenhainDigital Base Circle Readout. #32

Grinders, Belt

37” AEM Model 37NB-HD, 20 HP, U.S. Vair-

Speed Drive, Tracking,Single Head, Dry Type.

#11967

Grinders, Center Hole

2” x 40” Klein Model ZSS1,10,000 RPM, Dressing

Spdl., Exc. Condition. #1014

5

New 1999

New 1993

Fellows Model 10-2,Straight Spur Guide, 10”Max. External & Internal,2” Face Width, Tailstock,Change Gears, Ultra-con

SCR Drive. #1304

New 1972

New 1981

New 1974

New 1985

Liquidation Services:Whether you want to sell one machine or a complete facility, we have the experience andability to convert your machinery into cash in a timely manner. Corporate Asset Disposal

Specialists. Call for References!

COMPLETELYREBUILT BY

BOURN & KOCH1994

LOW PRICE!

MAKEOFFER!

MAKEOFFER!

LOW

PRICE!

Grinders, Cylindrical Plain, Angle Head•10” x 30” Cincinnati Model 10L/30, Auto-Truing, Auto Dressing, Comp.Barnes Magnetic Sludge Separator. (New 1970) #2110

Grinders, Cylindrical Plain, Angle Head, N/C &CNC•14” x 40” Warner & Swasey “Stepmaster” Model ACC1440 SMA,Electro-Tru Dresser, 20 HP, 30” Wheel, Tooling, Barnes Coolant &Filtration System. (New 1980) #1288

•24”/14” x 60” Warner & Swasey “Stepmaster” Model ACC24/1460SMA, Electro-Tru Dresser, 20 HP, 30” Wheel, Factory Raised to Swing 24”,Loads of Tooling and Spare Parts. (New 1982) #1580

Grinders, Cylindrical-Universal

12” x 24” ChevalierModel GU-1124A,Plunge, Sparkout,

Tarry, Internal Spindle,Vari-Speed Workhead,

Wheel Balancer,Coolant FiltrationSystem, Tooling.

#2343

Grinders, Disc, Horizontal, Double End Opposed

No. DH6-30” Besly/Bendix (H6000), 60 HP, Oscillating Feed, Dresser,Motion Products Control, Servo Driven Incremental Feed, Face Cutting/

Plunge Feed, Sparkout, Coolant Filtration System. #2403

No. SDG6-42” Gardner,50 HP, Rotary Feed, HoldDown, Incremental Feed,

Stepmotor Driven,Sparkout, MotorizedDresser Arm, D.R.O.,

Independent Drag-OutCoolant Filtration System.

#12565

Grinders, Internal/Bore•No. 2CF-70 Heald, 8” Max. O.D. Cap., Hand Feed, Oscillator on Table,Bore Grinder,Truing, Autocycle. (New 1977) #1015 & #1016

No. 1209 Bryant, 9” Swing, 60,000 RPM High FrequencySpindle/Generator, Swivel Workhead, 6” Woodworth 8-Jaw

Chuck, Mist Collector, Exc. Cond. #1769

Grinders, Surface, Rotary Type, HorizontalSpindle

20” Favretto ModelMR50, 15 HP, 20”Electro Magnetic

Chuck with Neutrifier,Table Speeds 15-120

RPM, InfinitelyVariable, 33.58” Max.

Under Wheelhead,18” Cross Feed of

Wheelhead,Incremental

Downfeed, M.D.Coolant. #12528

Grinders, Surface, Rotary Type, Vertical Spindle

7-1/2” x 100 DegreeSwisher Model Mark V, 3 HP,

Electro Magnetic KidneyShaped Chuck, Internal

Motor Driven CoolantSystem. #10819

6

New 1996

New 1981

New 1980

New 1980

New 1987

New 1982

Please help update our mailing list by emailingaddress and contact changes to [email protected]



36” BlanchardModel 20D-36, 40HP, 20” CortlandWheelhead, 36”Magnetic Chuck,

Flow-Con Coolant.#9496, #12821

48” Blanchard Model26HD-48, 100 HP, 26”Cortland SegmentedGrinding Wheel, 56”

Swing, Hardened Ways.#11317

100” BlanchardModel 54-100, 150

HP, 34” CortlandSegmented

Grinding Wheel, 48”Under Wheel, 128”Swing, Hardened

Ways, PolyconCoolant. #9865

Grinders, Tool & Cutter

Cincinnati “Monoset”, MT,Motorized Workhead, Tilting, ½

HP, Tooth Rest Centering Gauge,Workhead Spindle Index

Mechanism. #9978

Hones, Abrasive Flow

Extrude Hone Model10/8 “Spectrum”, 10”

Media CylinderDiameter, 8” RamDiameter, Media

Chiller & Re-Feed,Table Indexing

Mechanism. #10606

•Extrude Hone Model 10/8 “Spectrum”, 10” Media Cylinder Diameter, 8”Ram Diameter, Media Chiller, Allen Bradley PLC. (New 1993) #10937

•Extrude Hone Model 8/6 “Vector”, 8” Media Cylinder Diameter, 6” RamDiameter, Media Chiller, Allen Bradley PLC. (New 1998) #10944, #12452

•Dynetics Model HS1000, 10” Media Cylinder Diameter, Re-FeedSystem, Chiller, Rotary Table. (New 1994) #11579

Dynetics Model HL20, 5”Media Cylinder Diameter,

Media TemperatureController. #11580

Extrude Hone Model 6/6 “Vector”, 6” MediaCylinder Diameter, 6”Ram Diameter, Allen

Bradley PLC, 149Hours!! #12650

7

New 1977

New 1973

New 1984

New 1971

New 1982

New 2000

New 1990

Not Actual Photo

WE HAVETWO!

Skiving & Burnishing Machine

Keyseaters

1-1/4” W. x 12” L. Mitts & Merrill Model K-1212, MircroprocessorController, Tooling. #2148

2-3/4” W. x 23-1/2” L.Fromag (Mitts & Merrill)Model 70E/425, CNC,

Electro-MechanicalDrives, Servo Driven

Rotary Table for Profiling,Tooling. #9749

Lapping Machines

24” P.R. HoffmanModel 2300, DoubleSided Lapping, Vari-

Speed Top PlateDrive Slurry System.

#10563, #10564

48” Peter Wolters ModelAC1200, “MICROLINE”Double Sided Polisher,

Full Face Wheel,Siemens SUS-U-115Programmable Logic

Controller. #2279

Lathes, Combination, N/C & CNC

Mori Seiki Model AL-22ATM Two Axis, 18.9” Swing x 21.65”C.C., 2” Spindle Bore, Collet System, LNS Hydrobar Feed,

Programmable Tailstock, Fanuc MF-T4 Control, PartsCatcher, 8” Chuck, Tool Holders. #12517

8

New 1983

Sierra Skiving & BurnishingMachine, 8-1/2” Boring

Capacity, 151” Z-Travel, LargeQuantity of Tooling. #12647

New 1987

New 1994

New 1993

New 1992

New 1991

We are cash buyers of good used metal working and fabricating machinery.Please fax or email your surplus list and we will respond promptly!

Not Actual Photo

RARE FIND!



Lathes, Combination, N/C & CNC, 3-Axis or More

Muratec Model MW-12/G Twin Spindle CNC 4-Axis Turning Machinewith Ganty Loader, Part Turnaround and Unloader, (2) 6” Chucks,Fanuc 16TTA Control, (2) Tool Setters, Tool Shift, Coolant Filtration

System. #12486

•Muratec Model MW-20/G Twin Spindle CNC 4-Axis Turning Machinewith Gantry Loader, Part Turnaround and Unloader, (2) 8” Chucks, Fanuc16TTA Control, (2) Tool Setters, Tool Shift, Coolant Filtration System.(New 1997) #12487 SEE PHOTO ON FRONT COVER

Lathes, Engine

Machining Centers, Vertical, N/C & CNC•Chiron Model DZ18 W-Magnum “Twin Spindle” Vertical Machining Center,X-15.7”, Y-15.7”, Z-24.8”, (2) Position NC Rotary Table with Hydraulic Clamping,Fanuc O-M Control, 10,500 RPM Spindle, Rigid Tapping, Thru-SpindleCoolant, (2) x 24 Pos ATC, ISO 40 Taper, Barnes Coolant Filtration System.(New 1996) #12497, #12498 SEE PHOTO ON REAR COVER

Milling Machines, Production, Duplex•Kearney & Trecker Model 1536B, 15” x 58” Table, 36” Travel, 22-900RPM, Autocycle, 20 HP, #50NST. (New 1981) #1065

Toyoda Model FH-60 Twin Pallet CNC Horizontal Machining Center, X-39”, Y-31”, Z-29”, (2) 24.8” Pallets, .001 Degree Index, 48 Pos ATC,CAT 50 Taper, 25 HP Spindle, Thru-Spindle Coolant, Barnes Coolant

and Filtration System. #12561-#12563

Machining Centers, Horizontal, N/C & CNC

Lathes, Turret, Saddle Type

No. 5A, Warner & Swasey, 32” Power Chuck and PowerChuckwrench, 9-3/4” Spindle Bore, Cross Sliding Turret, Full Length

Threading, Taper Attach on Front Carriage, 75 HP, MiscellaneousTooling. #10976

26” x 72” cc, LeBlond Regal Servo Shift, 18” Swing Over Cross Slide,Threading, 15” Chuck, 2-Axis Digital Readout, Tooling. #10462

20” x 54” Lodge & Shipley Model 2013 AVS, 13” Swing Over CrossSlide, Inch Threading, Taper Attachment, Chucks, Steady Rest,

Chip Pan Base. #1216

18” x 150” American Style “B” Heavy Duty, 11” SwingOver Cross Slides, 20 HP, Taper Attachment, InchThreading, Steady Rest, Chucks, Tooling. #2419

9

New 1996

New 1972

New 1969

New 1970

New 1993

New 1976

RARE FIND

MAKE OFFER!



Milling Machines, Production, Simplex

Kent Owens Model2-20 Rise & Fall,12” x 42” Table,

5 HP, No. 40 NST,20” Travel, Change

Gears. #11181

Cincinnati Series 215-153, Quill Retraction,

15” x 63” Table,36” Travel, 15 HP,#50 NST. #1639

•Kent-Owens Model 2-20, 12” x 42” Table, SMC Model ECC50Programmable Logic Controller, Proximity Switches, Change Gears,Overarm, Arbors and Arbor Support. (New 1977) #2266

Millers, Thread

12” x 72” Lees Bradner Model HTA, Hydraulic In-Out MeteredActuation, Internal Attachment. #10820

Milling Machines, Universal•WMW Heckert Model 4 Type FSS/400S, 15 HP, 16” x 63” Table, 44”Table Travel, Universal Swivel Head, Auto Rise & Fall, 45-2240 RPM, 3-AxisAutomatic Machining Cycles, 2-Axis Simultaneously. (New 1993) #1171

Milling Machines, Vertical

OKK Model MH4V,20 HP, 22-1400 RPM,18” x 79” Table, 43”

Table Travel, #50 NST,Maximum Nose to Table

24”, Coolant, PowerDraw Bar. #1835

66 Ton Komatsu ModelOBS60-2, 4.7” Stroke,

16.9” Shut Height, 45-85SPM, 35” x 22” Bed.

#12478

Nichols Model 12PMC Rise and Fall, 9” x 36” Table, No. 40 NST, 18”Ball Screw Servo Feed Table Travel, Overarm and Support, Coolant

System. #11197

10

New 1970

New 1977

New 1976

New 1985

New 1970

New 1978

ANOTHERRARE

FIND!

DO YOUPAINT?

•Bridgeport Series II, 4 HP, 50-3500 RPM, 11” x 58” Table, 30” TableTravel, Power Feeds, Quill Feed. (New 1974). #1825

Mills, Attritor•Union Process Model Type B, Size 1S, Attritor. #2325

Miscellaneous MachineryMINIMIZE DISPOSAL COSTS NOW!•Compacting Technologies, Model CTI PRO 8560 Paint Filter Compactor,55 Gallon Capacity, hazardous Waste Compaction Set-up for Paint Filters.(New 1991) #11763

Presses, Die Cutting•60” x 20” Samco, 35 Ton, 2 Post, 3 HP with Sliding Table. #550

Presses, Gap Frame, Single Crank

88 Ton Komatsu ModelOBS80-3BM, 5.1” Stroke,19.25” Shut Height, 37-75 SPM, 39” x 24” Bed.

#12479

121 Ton KomatsuModel OBS110-3, 5.9”

Stroke, 18.9” ShutHeight, 32-65 SPM,

43” x 28” Bed.#12480

Presses, High Speed Production

45 Ton Bruderer Model BSTA 40/45,4-Post, .5”-2.25” Stroke, 11.56” ShutHeight, 70-1200 SPM, 26” x 21” Bed,

Hydrostatic Vari-Speed Drive, BBVFeed. #2320, #2321, #2322, #2323,

#2324

25 Ton V & O Model SS2-25-26 Partsmaster, 1-1/4”Stroke, 7-1/4" Shut Height,

0-600 SPM, 26"x20"Bolster. #12663

150 Ton Pacific Model150PF “Press-Former”, 12”

Stroke, 10” Shut Height, 22”DLO, 24” x 48” Bed Area,Dual Ram Speed, 30 HP.

#11390

110 Ton Cincinnati Model 110OBS Gap, 10” Stroke, 16”

DLO, 42” x 27” Bed, Cushion,Quick Die Change, CNC

Controller, ProgrammableKnock-Out, 8-Point Gibbing,588 IPM Advance, 60 IPMPressing, 608 IPM Return.

#2358

50 Ton P & H, 2-Post , 4” Stroke,16” DLO, 26” x 20” Bed Area,

Operation, 314 IPM Advance, 37IPM Press, 282 IPM Return, Non-Rotating Ram Guide, Electric Foot

Switch. #9753

11

117 Ton Neff Model H-100-50M,4-Post, 10” Stroke, 15” DLO, 60”

x 22” Between Posts, 50 HPHydraulic System, PLC Controls.

#12834

New 1989

New 1992

New 1971

New 1997

New 1981

New 1976

New 1992

New 1991

All machines promoted in this brochure can be inspected under power in our warehouse, or at our respective MDNA partners’ facility.

Rental and Leasing Options Available.

FIVE IN STOCK!

JUST PURCHASED!

Presses, Hydraulic•6 Ton Denison Model WR06, 12” Stroke, 16” DLO, 18” x 12” Bed Area,Dual Lever, Inching. (New 1976) #2155

•8 Ton Denison Multipress Model WR80HC, 12” Stroke, 16” DLO, 21”Diameter 6-Position Rotary Index Table, Dual Palm Controls. (New 1991)#12835, #12836

Presses, Hydraulic, Platen

30 Ton Tox-Pressotechnik ModelS30.30-70-6, C-Frame,

Removable Two-Station RotaryTable, Variable Tonnage Control,

Removable Heated Platen.#10639

Presses Hydraulic, Straightening

60 Ton Eitel Model RP60,17.7” Stroke, 36.6” DLO, 77” x10-3/4” Bed Area, Eitel WR 3

Shaft StraighteningAttachment. #9751

100 Ton Eitel ModelRP100, 18” Stroke, 38”DLO, 55” x 10-1/2” Bed

Area, Eitel WR2/100Shaft StraighteningAttachment. #9752

Presses, O.B.I, Back Geared, Single Crank

25 Ton V & O Model25ST,Back Geared 5”

Stroke, 9-1/2” Shut Height,80 SPM, 24” x 13-1/2” Bed

Area, Rotary Dial Table.#9728

75 Ton Minster Model 7, 4”Stroke, 21” Shut Height, 75-

150 SPM, 36” x 24” BedArea, Littell #4-8.5 Single

Roll Feed. #9245

60 Ton Bliss Model C60, 4”Stroke, 14.25” Shut Height, 3”

Ram Adjustment, 90 SPM, 36” x24” Bed Area. #12290

•5 Ton Minster Model 7SS “Die-Matic”, 5” Stroke, 17” ShutHeight, 3-3/4” Ram Adjustment, 45 SPM, 36” x 24” Bed Area.(New 1986) #12289 SEE PHOTO ON FRONT COVER

Presses, O.B.I., Flywheel, Single Crank

60 Ton Rousselle Model6A, 3” Stroke, 12-1/2”

Shut Height, 3-1/2” RamAdjustment, 110 SPM, 16”

x 10” Bed Area. #12291

12

New 1982New 1970

New 1994

New 1980

New 1974

New 1985

Heard of Any Plant Closures or Facilities Downsizing?Finder’s Fees Paid for Successful Leads! $$$$$$$$

New 1980

“BRAND NEW,NEVER USED”



•1/4" x 12’ Cincinnati “Century” Model 2H12, Hydraulic, 36” FrontOperated Power Back Gauge, Power Rake Adjustment, 96” Squaring Arm.(New 1985) #11818 SEE PHOTO ON REAR COVER

Reels, Centering

20000 Lb. Littell, Model 200-36 Coil Reel, 36” Width,60” O.D., 15-17-1/2” I.D., Hydraulic Exp., Power

Threading, Traveling Coil Car. #1996

Roll Formers

10 Stand Lockformer, 2” Spindle Diameter, 24” Roll Space, 12” c.c.,Chain Driven, Variable Speed, Outboard Supports. #9271

Saws, Band, Vertical•26” DoAll Model 26-3, 32” x 41” Table, 16” Table Stroke, 13” UnderGuide, Hydraulic Tilt Table, Vari-Speed, Shear/Weld/Grind. #1213

36” DoAll Model ZW-3620 “ZEPHYR”, 36” x

30” Tilt Table, 17” TableStroke, 20” Under Guide,Tilt Table, Vari-Speed 85to 15,000 FPM. #11982

Saws, Cold & Carbide

36” Kaltenbach ModelHDM 910, 11.8”

Rounds, 9.9” Squares.Nesting. Somerset

Production AutomatedFeed System with

Gauging & Discharge/Unloading System, Exc.

Cond. #676

Shears, Power Squaring

1/4" x 10’ Cincinnati Model 1810, 36” Front Operated Power BackGauge, Power Rake Adjustment, 10’ Squaring Arm. #10871

1” x 16’ Pacific Model #750HD16, Hydraulic, 60” Front Operated PowerBack Gauge, Power Rake Adjustment, 16’ Squaring Arm, Brand New

Knives Still in Box. #1055

13

New 1977

New 1972

New 1968

New 1970

New 1982

New 1984 PRICED TO SELL TODAY!



•30” Round Lucas, Air Lift, 90° Shot Pin, 360° Vernier, 8,500 Lb. Cap.(New 1983). #958

•36” x 36” Lucas, Air Lift, 90° Shot Pin, 360° Vernier, 15,000 Lb. Cap.(New 1974). #959

•50” x 50” Portage, Air Lift, 90° Deg. 14” High. #1098

3-1/2” Capacity VaillModel 7S, Single Stroke,

21 Tons, 15” FormingStroke. #12201

3"Capacity ConracModel 3CP-HD, Tube

and Pipe Flaring,Deburring, Beading,

Pneumatic Clamping .#12671

3” Capacity Pines Model 662Tube End Finisher, HydraulicClamping, PLC, Foot Treadle.

#11182

Tube Machinery•2” Capacity Parker Model P232, Pneumatic Vise, Tooling, PortableCabinet Base. #12202

Transfer Machines, Rotary, Trunion

Kaufman Model KMC3311/6, 6 Station, 1-1/

16 Thread Size, 20Threads, 1-3/8 Hex, 4

Heads. #10805

Straighteners, Flat & Shape•8” x .062” Littell Model 308-5PDL, 8-1/2” Width, 2-1/4” Diameter, 5Hardened Rolls, 20-100 FPM. #9246

Angle Plates•(2) 48” W x 72” H x 36” Deep Angle Plates, T-Slotted on 6” c.c. #2428

Tables, Air Lift Rotary

Tables, Floor & Layout Plates•(2) Floor Plates 60” x 120” x 9-1/2” Thick, Cast Iron, T-Slotted, Keyed/Matched Set. #2029

•(2) Portage 50” x 70” Slotted Layout Plates on Adjustable Stands.(New 1974) #2027

•(3) 72” x 204” x 11” Giddings & Lewis, T-Slotted Floor Plates,Fabricated, Matched. (New 1965) #9869, #9870, #9871

•(2) 48” x 144” x 14” Giddings & Lewis Floor Plates, Cast Iron, T-Slotted, Keyed/Matched. (New 1965) #9794, #9875

Testers, Hardness•New Age Industries Model AT130RDS Versitron Rockwell, 8” DiameterAnvil Table, Digital System, Auto-Program. (New 1989) #11196

Thread Rollers•5/8” Lian Feng Model LF-15 Hydraulic Thread Roller, Infeed, Workrest,Tooling. (New 1974) #2153

26” x 26” DeVlieg, Air Lift,90° Index, with Fine Adjust,

5,000 Lb. Cap. #1059

96” x 144” Gray Cross Sliding Hydra-Static RotaryTable, 35 Ton Capacity, 48” Infeed Stroke, 16 Pos.

Index Points. #9864

14

New 1970

New 1965

New 1978,

Completely

Rebuilt by

Kaufman 1989

New 1978

New 1983

New 1979

NEW Extended Warranty Program Now Available!!!

DON’T SEE WHAT YOUARE LOOKING FOR??

Try our Machinery Locating Services:While we can’t “ALWAYS” have in

stock what you are looking for, we canlocate any machine you require. Wewill provide photographs, qualify the

physical condition, and makearrangements for your inspection

under power. GIVE US A TRY, YOUWILL BE HAPPY THAT YOU DID!

Wire Machinery, Spring Coilers

BHS/Torin ModelW-11A Spring

Maker, .015” to.072” Wire

Diameter, AllenBradley PLC

Control, MoyerWire Feeder.

#12504

Welding Positioners

2,000 Lb. AronsonModel SHD20A-PTVR2,

Power Tilt & Rotate, Vari-Speed. #9145

50,000 Lb. Aronson Model GE-500, Geared Elevation, Power Rotate,Vari-Speed Rotation, 60” Diameter Table, Pendant. #2423

20,000 Lb. Ransome Model 5HS/5TS Headstock & Tailstock, Vari-Speed Headstock, Power Travel Base Tailstock. #1923

6,000 Lb. Aronson ModelHD60A, Power Tilt &Rotate, Vari-Speed.

#12366

•3,000 Lb. Pandjiris Model 30-6, Power Tilt & Rotate, Vari-Speed.(New 1986) #12366

15

New 1982

New 1977

New 1993

New 1975

New 1989

Liberty Machinery is pleased to announce our new extended warranty program covering used machinery. This inexpensivewarranty provides you with bottom-line protection if a mechanical or electrical breakdown occurs within the first year. Thisvaluable assurance covers parts and labor and is underwritten by the Hartford Steam Boiler Inspections and InsuranceCompany, a leading breakdown insurer. Call us for complete details.

Have confidence in what you buy with our new extended warranty program!!

•18,000 Lb. Aronson Model HD180R, Power Tilt & Rotate, Vari-Speed.

JUST PURCHASED!

LIBERTYMACHINERY COMPANY

LIBERY MACHINERY COMPANY707 Skokie Blvd., Suite 100 • Northbrook, IL 60062Phone (847) 509-9379 • Fax: (847) 509-9380E-mail : [email protected]

PRESORTEDSTANDARD MAIL

U.S.POSTAGE PAIDLITTLE ROCK, ARPERMIT NO. 1884

Check out our Interactive Warehouse Tour at:www.libertymachinery.com

Chiron Model DZ18 W-Magnum “Twin Spindle” VerticalMachining Center, X-15.7”, Y-15.7”, Z-24.8”, (2) Position NCRotary Table with Hydraulic Clamping, Fanuc O-M Control,10,500 RPM Spindle, Rigid Tapping, Thru-Spindle Coolant,(2) x 24 Pos ATC, ISO 40 Taper, Barnes Coolant Filtration

System. #12497, #12498

1/4" x 12’ Cincinnati “Century” Model 2H12, Hydraulic, 36”Front Operated Power Back Gauge, Power Rake

Adjustment, 78” Squaring Arm, Support Arms. #11818

New 1996

New 1985

TWO INSTOCK!

2003 Fall Cataloguen.hsix.com/brochure/010346.pdf · Electro-Mechanical Drives, Servo Driven Rotary...

Documents

Transcript of 2003 Fall Cataloguen.hsix.com/brochure/010346.pdf · Electro-Mechanical Drives, Servo Driven Rotary...