2. Run. Hours button

1. Run. Hours screen

Running hours

Running hours

Last time running hours are entered

Last number of running hours

Actual number of running hours (calculated!!!)

MARAD asks WEEKLY for the actual number of running hours

RED = overdue

YELLOW = you just changed but did not save yet

GREEN = OK

Add a device1. Press “Add”

Add a device1. Press “Add”

2. Type text

Add a device1. Press “Add”

2. Type text

3. Press <ENTER> (a pop-up appears)

Add a device1. Press “Add”

2. Type text

3. Press <ENTER> (a pop-up appears)

4. Press <ENTER> or click “OK”

Add a device1. Press “Add”

2. Type text

3. Press <ENTER> (a pop-up appears)

4. Press <ENTER> or click “OK”

5. Type actual running hours and press <Save>

Add a device1. Press “Add”

2. Type text

3. Press <ENTER> (a pop-up appears)

4. Press <ENTER> or click “OK”

5. Type actual running hours and press <Save>

6. A check pop-up appears. If correct, press <ENTER> or click “YES”

Add a device1. Press “Add”

2. Type text

3. Press <ENTER> (a pop-up appears)

4. Press <ENTER> or click “OK”

5. Type actual running hours and press <Save>

6. A check pop-up appears. If correct, press <ENTER> or click “YES”

7. Device successfully added

Add a device

When an device is added in the hour screen it can be used in the maintenance module.

Maintenance points can now run on running hours.

When ‘’running hours’’ is selected the right device can be attached on the maintenance point.

See chapter ‘Maintenance’

Change the name of a device

1. Left- or Right-click at the device

Change name of a device

1. Left- or Right-click at the device

2. Change name

Change name of a device

1. Left- or Right-click at the device

2. Change name

3. Press <ENTER>

Delete a device1. Be sure the device is not used anymore and not linked to any maintenance point.

2. Left- or Right-click at the device

Delete a device1. Be sure the device is not used anymore and not linked to any maintenance point.

2. Left- or Right-click at the device

3. Click at the red cross

Delete a device1. Be sure the device is not used anymore and not linked to any maintenance point.

2. Left- or Right-click at the device

3. Click at the red cross

4. If you are sure, press <ENTER> or click “Yes”