2 End Drawings and Specifications - Cask Brewing Systems Drawings and Specifications.pdf · 11/...
Transcript of 2 End Drawings and Specifications - Cask Brewing Systems Drawings and Specifications.pdf · 11/...
End Drawings and Specifications Index11 / 00-03-09
04 5 01 02 0
EDITION/DATE:
CCE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS
CUSTOMER INFORMATION
SCHMALBACH-LUBECACONTINENTAL CAN EUROPE
Page 1 of 2
➚ 04 5 00 00 2EXIT CODE NOINDEX
2 End Drawings and Specifications
Title Edition Date Code No.
Beverage End ø50 (200) SOT
Beverage End 2 99-03-30 04 5 01 02 8
ø50 (200 Mini Seam) SOT - SBC
Beverage End 1 00-04-05 04 5 01 02 19
ø50 (200 Mini Seam) SOT - WBC
Beverage End ø52 (202) SOT
Beverage End 4 00-08-20 04 5 01 02 13
ø52 (202) SOT
Beverage End 4 00-08-20 04 5 01 02 14
ø52 (202) SOT - WBC
Beverage End 1 99-03-30 04 5 01 02 15
ø52 (202) SOT - Large Opening End (LOE)
Beverage End 1 99-03-30 04 5 01 02 16
ø52 (202) SOT - Large Opening End (LOE)
Beverage End for Pasteurisation 1 99-08-05 04 5 01 02 21
ø52 (202 SOT - WBC
End Drawings and Specifications Index11 / 00-03-09
04 5 01 02 0
EDITION/DATE:
CCE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS
CUSTOMER INFORMATION
SCHMALBACH-LUBECACONTINENTAL CAN EUROPE
Page 2 of 2
➚ 04 5 00 00 2EXIT CODE NOINDEX
2 End Drawings and Specifications
Title Edition Date Code No.
Beverage End ø57 (206) SOT
Beverage End 6 99-03-30 04 5 01 02 3
ø57 (206) SOT - SBC
Beverage End 1 99-04-13 04 5 01 02 10
ø57 (206) SOT - WBC
Beverage End 1 99-03-30 04 5 01 02 17
ø57 (206) SOT -
Large Opening End (LOE) - SBC
Beverage End 1 99-05-04 04 5 01 02 18
ø57 (206) SOT -
Large Opening End (LOE) - WBC
Compound Placement
Compound Placement H. O. S. 3 00-06-20 04 5 01 02 11
for Ends ø50 (200 Mini Seam) SOT
Compound Placement H. O. S. 3 99-05-20 04 5 01 02 9
for Ends ø52 (202) SOT
Compound Placement H. O. S. 4 99-05-20 04 5 01 02 4
for Ends ø57 (206) SOT
Compound Placement L. O. S. 4 99-05-20 04 5 01 02 6
for Ends ø57 (206) SOT
Beverage End
ø57 (206) SOT - SBC
Product Information6 / 99-03-30
04 5 01 02 3
EDITION/DATE:
CCE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS
CUSTOMER INFORMATION
SCHMALBACH-LUBECACONTINENTAL CAN EUROPE
Page 1 of 1
EXIT CODE NOINDEX ➚ 04 5 00 00 2
Code Character
Dimensions in mm, unless mentioned otherwise
ø57 (206) SOTSoft Drinks
ø57 (206) SOTBeer
ø57 (206) SOTprinted
A Curl Diameter 64.75 ±0.25
B Countersink Diameter 54.61 ref.
C Curl Height 2.08 ±0.15
D Curl Opening 2.72 min.
RE Countersink Radius 0.5 nom.
F Countersink Depth 6.35 ±0.15
G Metal Thickness 0.270 - 0.285
H Panel Depth 2.0 nom.
J Chuck Wall Angle 14° ref.
- Compound Weight (1.24 sg) HOS 48 ±7 mg / LOS 37 ±7 mg
- Compound Volume HOS 39 mm³ / LOS 30 mm³
- Compound Placement High Shoulder Placement (HOS) / Low Shoulder Placement (LOS)
- Pressure Resistance 620 kPa min. (90 PSI) / 655 kPa min. (95 PSI)
- Units per 2“ 24 - 27
- Pop Force 23 N max.
- End Weight ≈ 3.8 g ≈ 3.9 g ≈ 3.9 g
Note: End thickness may vary to accomodate special requirements.Consult with your local CTS Manager for your specific requirement.
Compound Placement H. O. S.
for Ends ø57 (206) SOT
Product Information4 / 99-05-20
04 5 01 02 4
EDITION/DATE:
CCE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS
CUSTOMER INFORMATION
SCHMALBACH-LUBECACONTINENTAL CAN EUROPE
Page 1 of 1
EXIT CODE NOINDEX ➚ 04 5 00 00 2
On the circumference of the end, four (4) defects (wetting defects and incomplete overlap) are
permissible. Transversely to the compound channel, only one (1) wetting defect is permissible.
Insufficient compound, blisters and excessive compound do not affect the function of the end.
All dimensions in mm.
5.25 max. (= min. shoulder placement)
4.25 min. (= max. shoulder placement)
Cut edge placement 0 - 1.5
Compound Placement L. O. S.
for Ends ø57 (206) SOT
Product Information4 / 99-05-20
04 5 01 02 6
EDITION/DATE:
CCE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS
CUSTOMER INFORMATION
SCHMALBACH-LUBECACONTINENTAL CAN EUROPE
Page 1 of 1
EXIT CODE NOINDEX ➚ 04 5 00 00 2
On the circumference of the end, four (4) defects (wetting defects and incomplete overlap) are
permissible. Transversely to the compound channel, only one (1) wetting defect is permissible.
Insufficient compound, blisters and excessive compound do not affect the function of the end.
All dimensions in mm.
5.85 max. (= min. shoulder placement)
5.10 min. (= max. shoulder placement)
Cut edge placement 0 - 1.5
Beverage End
ø50 (200 Mini Seam) SOT - SBC
Product Information2 / 99-03-30
04 5 01 02 8
EDITION/DATE:
CCE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS
CUSTOMER INFORMATION
SCHMALBACH-LUBECACONTINENTAL CAN EUROPE
Page 1 of 1
EXIT CODE NOINDEX ➚ 04 5 00 00 2
Code CharacterDimensions in mm, unless mentioned otherwise
ø50 (200) SOT
A Curl Diameter 57.00 ±0.20
B Countersink Diameter 47.50 ref.
C Curl Height 2.11 ±0.15
D Curl Opening 2.72 min.
RE Countersink Radius 0.51 ref.
F Countersink Depth 6.60 ±0.15
G Metal Thickness 0.224
H Panel Depth 2.32 nom.
J Chuck Wall Angle 12°
- Compound Weight (1.24 sg) 35 ±6 mg
- Compound Volume 28 mm³
- Compound Placement High Shoulder Placement (HOS)
- Pressure Resistance 620 kPa min. (90 PSI)
- Units per 2“ 23 - 25
- Pop Force 27 N max.
- End Weight ≈ 2.7 g
Note: End thickness may vary to accomodate special requirements.Consult with your local CTS Manager for your specific requirement.
Compound Placement H. O. S.
for Ends ø52 (202) SOT
Product Information3 / 99-05-20
04 5 01 02 9
EDITION/DATE:
CCE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS
CUSTOMER INFORMATION
SCHMALBACH-LUBECACONTINENTAL CAN EUROPE
Page 1 of 1
EXIT CODE NOINDEX ➚ 04 5 00 00 2
On the circumference of the end, four (4) defects (wetting defects and incomplete overlap) are
permissible. Transversely to the compound channel, only one (1) wetting defect is permissible.
Insufficient compound, blisters and excessive compound do not affect the function of the end.
All dimensions in mm.
6.10 max. (= min. shoulder placement)
5.10 min. (= max. shoulder placement)
Cut edge placement 0 - 1.5
Beverage End
ø57 (206) SOT - WBC
Product Information1 / 99-04-13
04 5 01 02 10
EDITION/DATE:
CCE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS
CUSTOMER INFORMATION
SCHMALBACH-LUBECACONTINENTAL CAN EUROPE
Page 1 of 1
EXIT CODE NOINDEX ➚ 04 5 00 00 2
Code Character
Dimensions in mm, unless mentioned otherwise
ø57 (206) SOTSoft Drinks
ø57 (206) SOTBeer
ø57 (206) SOTprinted
A Curl Diameter 64.75 ±0.25
B Countersink Diameter 54.61 ref.
C Curl Height 2.08 ±0.15
D Curl Opening 2.72 min.
RE Countersink Radius 0.5 nom.
F Countersink Depth 6.35 ±0.15
G Metal Thickness 0.270 - 0.285
H Panel Depth 2.0 nom.
J Chuck Wall Angle 14° ref.
- Compound Weight (1.05 sg) 39 ±6 mg
- Compound Volume 37 mm³
- Compound Placement High Shoulder Placement (HOS)
- Pressure Resistance 620 kPa min. (90 PSI) / 655 kPa min. (95 PSI)
- Units per 2“ 24 - 27
- Pop Force 23 N max.
- End Weight ≈ 3.8 g ≈ 3.9 g ≈ 3.9 g
Note: End thickness may vary to accomodate special requirements.Consult with your local CTS Manager for your specific requirement.
Compound Placement H. O. S.
for Ends ø50 (200 Mini Seam) SOT
Product Information3 / 00-06-20
04 5 01 02 11
EDITION/DATE:
CCE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS
CUSTOMER INFORMATION
SCHMALBACH-LUBECACONTINENTAL CAN EUROPE
Page 1 of 1
EXIT CODE NOINDEX ➚ 04 5 00 00 2
On the circumference of the end, four (4) defects (wetting defects and incomplete overlap) are
permissible. Transversely to the compound channel, only one (1) wetting defect is permissible.
Insufficient compound, blisters and excessive compound do not affect the function of the end.
All dimensions in mm.
5.40 max. (= min. shoulder placement)
4.90 min. (= max. shoulder placement)
Cut edge placement 1 - 2
Beverage End
ø52 (202) SOT
Product Information4 / 00-08-20
04 5 01 02 13
EDITION/DATE:
CCE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS
CUSTOMER INFORMATION
SCHMALBACH-LUBECACONTINENTAL CAN EUROPE
Page 1 of 1
EXIT CODE NOINDEX ➚ 04 5 00 00 2
Code CharacterDimensions in mm, unless mentioned otherwise
ø52 (202) SOT
A Curl Diameter 59.44 ±0.25
B Countersink Diameter 49.61 ref.
C Curl Height 2.11 ±0.15
D Curl Opening 2.72 min.
RE Countersink Radius 0.51 ref.
F Countersink Depth 6.86 ±0.15
G Metal Thickness 0.224
H Panel Depth 2.47 nom.
J Chuck Wall Angle 13° ref.
- Compound Weight (1.05 sg) 29 ±6 mg
- Compound Volume 28 mm³
- Compound Placement High Shoulder Placement (HOS)
- Pressure Resistance 620 kPa min. (90 PSI)
- Units per 2“ 23 - 25
- Pop Force 27 N max.
- End Weight ≈ 2.9 g
Note: End thickness may vary to accomodate special requirements.Consult with your local CTS Manager for your specific requirement.
Beverage End
ø52 (202) SOT - WBC
Product Information4 / 00-08-20
04 5 01 02 14
EDITION/DATE:
CCE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS
CUSTOMER INFORMATION
SCHMALBACH-LUBECACONTINENTAL CAN EUROPE
Page 1 of 1
EXIT CODE NOINDEX ➚ 04 5 00 00 2
Code CharacterDimensions in mm, unless mentioned otherwise
ø52 (202) SOT
A Curl Diameter 59.44 ±0.25
B Countersink Diameter 49.61 ref.
C Curl Height 2.03 ±0.15
D Curl Opening 2.72 min.
RE Countersink Radius 0.51 ref.
F Countersink Depth 6.86 ±0.15
G Metal Thickness 0.224
H Panel Depth 2.30 nom.
J Chuck Wall Angle 13° ref.
- Compound Weight (1.05 sg) 29 ±6 mg
- Compound Volume 28 mm³
- Compound Placement High Shoulder Placement (HOS)
- Pressure Resistance 620 kPa min. (90 PSI)
- Units per 2“ 25 - 27
- Pop Force 27 N max.
- End Weight ≈ 2.9 g
Note: End thickness may vary to accomodate special requirements.Consult with your local CTS Manager for your specific requirement.
Beverage End
ø52 (202) SOT - Large Opening End (LOE)
Product Information1 / 99-03-30
04 5 01 02 15
EDITION/DATE:
CCE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS
CUSTOMER INFORMATION
SCHMALBACH-LUBECACONTINENTAL CAN EUROPE
Page 1 of 1
EXIT CODE NOINDEX ➚ 04 5 00 00 2
Code CharacterDimensions in mm, unless mentioned otherwise
ø52 (202) SOT
A Curl Diameter 59.44 ±0.25
B Countersink Diameter 49.61 ref.
C Curl Height 2.11 ±0.15
D Curl Opening 2.72 min.
RE Countersink Radius 0.51 nom.
F Countersink Depth 6.86 ±0.15
G Metal Thickness 0.224
H Panel Depth 2.47 nom.
J Chuck Wall Angle 13°
- Compound Weight (1.05 sg) 29 ±6 mg
- Compound Volume 28 mm³
- Compound Placement High Shoulder Placement (HOS)
- Pressure Resistance 640 kPa min. (93 PSI)
- Units per 2“ 23 - 25
- Pop Force 27 N max.
- End Weight ≈ 2.9 g
Note: End thickness may vary to accomodate special requirements.Consult with your local CTS Manager for your specific requirement.
Beverage End
ø52 (202) SOT - Large Opening End (LOE)
Product Information1 / 99-03-30
04 5 01 02 16
EDITION/DATE:
CCE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS
CUSTOMER INFORMATION
SCHMALBACH-LUBECACONTINENTAL CAN EUROPE
Page 1 of 1
EXIT CODE NOINDEX ➚ 04 5 00 00 2
Code CharacterDimensions in mm, unless mentioned otherwise
ø52 (202) SOT
A Curl Diameter 59.44 ±0.25
B Countersink Diameter 49.61 ref.
C Curl Height 2.11 ±0.15
D Curl Opening 2.72 min.
RE Countersink Radius 0.51 ref.
F Countersink Depth 6.86 ±0.15
G Metal Thickness 0.224
H Panel Depth 2.47 nom.
J Chuck Wall Angle 13° ref.
- Compound Weight (1.05 sg) 29 ±6 mg
- Compound Volume 28 mm³
- Compound Placement High Shoulder Placement (HOS)
- Pressure Resistance 620 kPa min. (90 PSI)
- Units per 2“ 23 - 25
- Pop Force 27 N max.
- End Weight ≈ 2.9 g
Note: End thickness may vary to accomodate special requirements.Consult with your local CTS Manager for your specific requirement.
Beverage End
ø57 (206) SOT - Large Opening End (LOE) - SBC
Product Information1 / 99-03-30
04 5 01 02 17
EDITION/DATE:
CCE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS
CUSTOMER INFORMATION
SCHMALBACH-LUBECACONTINENTAL CAN EUROPE
Page 1 of 1
EXIT CODE NOINDEX ➚ 04 5 00 00 2
Code CharacterDimensions in mm, unless mentioned otherwise
ø57 (206) SOT
A Curl Diameter 64.75 ±0.25
B Countersink Diameter 54.61 ref.
C Curl Height 2.08 ±0.15
D Curl Opening 2.72 min.
RE Countersink Radius 0.5 nom.
F Countersink Depth 6.35 ±0.15
G Metal Thickness 0.280
H Panel Depth 2.0 nom.
J Chuck Wall Angle 14°
- Compound Weight (1.24 sg) 48 ±7 mg
- Compound Volume 39 mm³
- Compound Placement High Shoulder Placement (HOS)
- Pressure Resistance 655 kPa min. (95 PSI)
- Units per 2“ 24 - 27
- Pop Force 23 N max.
- Vent Pressure 380 kPa min. (55 PSI)
- End Weight ≈ 3.9 g
Note: End thickness may vary to accomodate special requirements.Consult with your local CTS Manager for your specific requirement.
Beverage End
ø57 (206) SOT - Large Opening End (LOE) - WBC
Product Information1 / 99-05-04
04 5 01 02 18
EDITION/DATE:
CCE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS
CUSTOMER INFORMATION
SCHMALBACH-LUBECACONTINENTAL CAN EUROPE
Page 1 of 1
EXIT CODE NOINDEX ➚ 04 5 00 00 2
Code CharacterDimensions in mm, unless mentioned otherwise
ø57 (206) SOT
A Curl Diameter 64.75 ±0.25
B Countersink Diameter 54.61 ref.
C Curl Height 2.08 ±0.15
D Curl Opening 2.72 min.
RE Countersink Radius 0.5 nom.
F Countersink Depth 6.35 ±0.15
G Metal Thickness 0.280
H Panel Depth 2.0 nom.
J Chuck Wall Angle 14°
- Compound Weight (1.05 sg) 39 ±6 mg
- Compound Volume 37 mm³
- Compound Placement High Shoulder Placement (HOS)
- Pressure Resistance 655 kPa min. (95 PSI)
- Units per 2“ 24 - 27
- Pop Force 23 N max.
- Vent Pressure 380 kPa min. (55 PSI)
- End Weight ≈ 3.9 g
Note: End thickness may vary to accomodate special requirements.Consult with your local CTS Manager for your specific requirement.
Beverage End
ø50 (200 Mini Seam) SOT - WBC
Product Information1 / 00-04-05
04 5 01 02 19
EDITION/DATE:
CCE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS
CUSTOMER INFORMATION
SCHMALBACH-LUBECACONTINENTAL CAN EUROPE
Page 1 of 1
EXIT CODE NOINDEX ➚ 04 5 00 00 2
Code CharacterDimensions in mm, unless mentioned otherwise
ø50 (200) SOT
A Curl Diameter 57.00 ±0.20
B Countersink Diameter 47.50 ref.
C Curl Height 2.11 ±0.15
D Curl Opening 2.72 min.
RE Countersink Radius 0.51 ref.
F Countersink Depth 6.60 ±0.15
G Metal Thickness 0.224
H Panel Depth 2.32 nom.
J Chuck Wall Angle 12°
- Compound Weight (1.05 sg) 28 ±6 mg
- Compound Volume 27 mm³
- Compound Placement High Shoulder Placement (HOS)
- Pressure Resistance 620 kPa min. (90 PSI)
- Units per 2“ 23 - 25
- Pop Force 27 N max.
- End Weight ≈ 2.7 g
Note: End thickness may vary to accomodate special requirements.Consult with your local CTS Manager for your specific requirement.
Beverage End for Pasteurisation
ø52 (202) SOT - WBC
Product Information1 / 99-08-05
04 5 01 02 21
EDITION/DATE:
CCE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS
CUSTOMER INFORMATION
SCHMALBACH-LUBECACONTINENTAL CAN EUROPE
Page 1 of 1
EXIT CODE NOINDEX ➚ 04 5 00 00 2
Code CharacterDimensions in mm, unless mentioned otherwise
ø52 (202) SOT
A Curl Diameter 59.44 ±0.25
B Countersink Diameter 49.61 ref.
C Curl Height 2.11 ±0.15
D Curl Opening 2.72 min.
RE Countersink Radius 0.51 ref.
F Countersink Depth 6.86 ±0.15
G Metal Thickness 0.224
H Panel Depth 2.47 nom.
J Chuck Wall Angle 13° ref.
- Compound Weight (1.05 sg) 29 ±6 mg
- Compound Volume 28 mm³
- Compound Placement High Shoulder Placement (HOS)
- Pressure Resistance 640 kPa min. (93 psi)
- Units per 2“ 23 - 25
- Pop Force 27 N max.
- End Weight ≈ 2.9 g
Note: End thickness may vary to accomodate special requirements.Consult with your local CTS Manager for your specific requirement.