2 building interior flashcard pp #3 (2014)

24
Don’t forget about the code references

Transcript of 2 building interior flashcard pp #3 (2014)

Page 1: 2 building interior flashcard pp #3 (2014)

Don’t forget about the code references

Page 2: 2 building interior flashcard pp #3 (2014)

Combustible material within ____ inches of the fireplace opening shall not project more than 1/8 inch for each 1-inch distance from such opening. © 1001.11 (x#4)

Woodwork or other combustible materials shall not be placed within ____ inches of a fireplace opening.© R1001.11

Page 3: 2 building interior flashcard pp #3 (2014)

Hearth extensions shall extend at least ___ inches in front of and at least ____ inches beyond each side of the fireplace opening. © (<6 sf =>6 sf) R1001.10

Page 4: 2 building interior flashcard pp #3 (2014)

Dwelling units in two-family dwellings shall be separated from each other by wall and/or floor assemblies of not less than ____-hour fire-resistive rating.© R317.1

Page 5: 2 building interior flashcard pp #3 (2014)

Openings from a private garage directly into a room used for sleeping purposes shall ____ be permitted.© R309.1

Where openings are provided as a means of escape and rescue they shall have a sill height of not more than ____ inches above the floor. © R310.1

Page 6: 2 building interior flashcard pp #3 (2014)

All habitable rooms shall be provided with aggregate glazing area of not less than ____ percent of the floor area of such rooms. © R303.1

Glazing within 60” of the top and bottom of stairways where the bottom edge of the glass is less than 60” above the walking surface is considered a specific ____ location.© R308.4

Page 7: 2 building interior flashcard pp #3 (2014)

The minimum width of a hallway shall be not less than ____ feet. © R311.3

Stairways shall not be less than ____ inches in clear width at all points above the permitted handrail height and below the required headroom height. © R311.5.1

Page 8: 2 building interior flashcard pp #3 (2014)

A minimum ____-foot by ____-foot landing shall be provided:At the top and bottom of ramps.Where doors open onto ramps.Where ramps change directions.© R311.6.2

Other habitable rooms shall have a floor area of not less than ____ square feet. © R304.2

Habitable rooms shall not be less than ____feet in any horizontal dimension. ©

Page 9: 2 building interior flashcard pp #3 (2014)
Page 10: 2 building interior flashcard pp #3 (2014)

On stairways, the minimum tread depth shall be ____ inches.© R311.5.3.2

On stairways the greatest riser height within any flight of stairs shall not exceed the smallest by more than ____ inch.© R311.5.3.1

On stairways the greatest tread depth within any flight of stairs shall not exceed the smallest by more than ____ inch. © R311.5.3.2

04/12/23 www.icc.org 10

Page 11: 2 building interior flashcard pp #3 (2014)

04/12/23 www.icc.org 11

Page 12: 2 building interior flashcard pp #3 (2014)

On stairways a nosing not less than ____ inch but not more than ____ inches shall be provided on stairways with solid risers.© R311.5.3.3

Handrails shall not project more than ____ inches on either side of the stairway.© R311.5.1

Handrails having a minimum and maximum heights of ____ inches and ____inches shall be provided on at least one side of stairways.© R311.5.6.1

The minimum width of a Type II handrail above the recess shall be ____ inches to a maximum of ____.© R311.5.6.3

04/12/23 www.icc.org 12

Page 13: 2 building interior flashcard pp #3 (2014)

04/12/23 www.icc.org 13

Page 14: 2 building interior flashcard pp #3 (2014)

04/12/23 www.icc.org 14

Page 15: 2 building interior flashcard pp #3 (2014)

The minimum headroom in all parts of the stairway shall not be less than ____ feet, ____ inches.© R311.5.2

On stairways, the maximum riser height shall be ____ inches.© R311.5.3.1

Porches, balconies or raised floor surfaces located more than ____ inches above the floor or grade below shall have guards not less than ____ inches in height.© R312.1

04/12/23 www.icc.org 15

Page 16: 2 building interior flashcard pp #3 (2014)

On spiral stairways, the minimum width shall be ____ inches. The rise shall be no more than ____ inches. A minimum headroom of ____ feet, ____ inches shall be provided.© R311.5.8.1

Required guards on stairways and porches shall be constructed to not allow passage of a ____ inch diameter sphere.© R312.2

04/12/23 www.icc.org 16

Page 17: 2 building interior flashcard pp #3 (2014)

04/12/23 www.icc.org 17

Page 18: 2 building interior flashcard pp #3 (2014)

04/12/23 www.icc.org 18

Page 19: 2 building interior flashcard pp #3 (2014)

The required exit door shall be a side-hinged door not less than ____ feet in width and ___ feet, ___ inches in height .©

All emergency escape and rescue openings shall have a minimum net clear opening of ____ square feet. Minimum opening height shall be ____ inches. Minimum opening width shall be ____ inches.© R310.1.1, R310.1.3

Page 20: 2 building interior flashcard pp #3 (2014)
Page 21: 2 building interior flashcard pp #3 (2014)

Every dwelling unit shall have at last one habitable room that shall have not less than ____ square feet or gross floor area.©

Bathrooms shall be provided with aggregate glazing area in windows of not less than ____ square feet, one-half of which must be openable.© R303.3

Page 22: 2 building interior flashcard pp #3 (2014)

Smoke alarms shall be required in the following locations:In each sleeping roomAdjacent to each bedroomOn each story of the dwelling.© True or False

R313.2

Required smoke alarms shall receive their primary power from the building wiring, and when primary power is interrupted, shall receive power from a ____.© R313.3

Page 23: 2 building interior flashcard pp #3 (2014)

Openings between the garage and the residence shall be equipped with solid wood doors not less than ____ inches, or ____-minute fire-rated doors.© R309.1

The garage shall be separated from the residence and its attic area by not less than ____ inch gypsum board or equivalent applied to the garage side.© R309.2

Page 24: 2 building interior flashcard pp #3 (2014)

Every landing shall have a minimum dimension of ____ inches measured in the direction of travel.© R311.5.4