1z0-539 - Sem Imagens
-
Upload
ricardopassoni -
Category
Documents
-
view
226 -
download
0
Transcript of 1z0-539 - Sem Imagens
-
7/21/2019 1z0-539 - Sem Imagens
1/72
Item 1 of 72
Which utility is responsible for generating source data definitions files?
A. EMSCLNT
B. COBGEN
C. DDLGEN
D. DEFGEN
Answer: D
Explanation:
Reference:
http://download-oracle-com/docs/cdlE15881_01/doc.104Jgg_wux_ref_v104.pdf
Answer: D
-
7/21/2019 1z0-539 - Sem Imagens
2/72
Item 2 of 72
Which Manager Parameter sets will report current lag every hour and write a critical message
for any Extract/Replicat with a lag over 60 minutes?
A. LAGBEPORTHOURS 1, LAGINFO 1 and LAGCRITICAL 60
B. LAGREPORTMINUTES 60, LAGINFOHOURS 1
C. LAGREPORT 1, LAGCRITICALHOURS 1
D. LAGREPORTHOURS 1, LAGINFOMINUTES 30, LAGCR JTTCAI-M I
Answer: B
Explanation:
Reference
http://download-oracle-com/docs/cd/E15881_01/doc.104Jgg_wux_ref_v104.pdf
Answer: B
http://download-oracle-com/docs/cd/E15881_01/doc.104Jgg_wux_ref_v104.pdfhttp://download-oracle-com/docs/cd/E15881_01/doc.104Jgg_wux_ref_v104.pdfhttp://download-oracle-com/docs/cd/E15881_01/doc.104Jgg_wux_ref_v104.pdf -
7/21/2019 1z0-539 - Sem Imagens
3/72
Item 3 of72
Which argument is used to set the maximum size of the EXTTRAIL or RMTTRAIL.
A. MAXSIZE
B. TRAILSIZE
C. MAXTRAILSIZE
D. TRAILMAXSIZEE. MEGABYTES
Answer: E
Explanation:
http://ljianmingIi-comIwp/?p=1534
Answer: E
http://ljianmingii-comiwp/?p=1534http://ljianmingii-comiwp/?p=1534http://ljianmingii-comiwp/?p=1534 -
7/21/2019 1z0-539 - Sem Imagens
4/72
Item 4 of 72
Which three describe a valid OGG Event Action?
A. Stop the process
B. Write a checkpoint before and/or after writing the record to the
trail.
C. Run shell commandD. Purge old trail files
Answer: ABC
Explanation:
References
http://gavinsoorma.com/2010/07/usefuI-goldengate-commands-shell-obey-help-
historyversions/
Answer: A, B and C
http://gavinsoorma.com/2010/07/usefuI-goldengate-commands-shell-obey-help-historyversions/http://gavinsoorma.com/2010/07/usefuI-goldengate-commands-shell-obey-help-historyversions/http://gavinsoorma.com/2010/07/usefuI-goldengate-commands-shell-obey-help-historyversions/http://gavinsoorma.com/2010/07/usefuI-goldengate-commands-shell-obey-help-historyversions/http://gavinsoorma.com/2010/07/usefuI-goldengate-commands-shell-obey-help-historyversions/ -
7/21/2019 1z0-539 - Sem Imagens
5/72
Item 5 of 72
You have implemented multi-master Oracle-Oracle replication without a provision to exclude
transactions committed by a Replicat process. What errors are likely to occur?
A. Inserts will generate a primary key uniqueness violation; deletes
will generate a 'no matching row not found error; updates will
continue forever.
B. None: loop detection is on by default in Oracle.
C. New inserts will be processed without issue; updates and deletes
will generate a "row not found" error.
D. Updates and deletes will be replicated without issue new inserts
will generate a primary key uniqueness violation.
Answer: B
Answer: A(*) or B?
-
7/21/2019 1z0-539 - Sem Imagens
6/72
Item 6 of 72
If multiple GoldenGate processes are accessing a set of trail files which of the processes should
include the PURGEOLDEXTRACTS parameter to trigger trail file clean up?
A. Manager
B. Extract
C. Replicat
D. Both Extract and Replicat
Answer: D
Explanation:
Reference:
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf
Answer: A(*) or D?
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdfhttp://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdfhttp://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf -
7/21/2019 1z0-539 - Sem Imagens
7/72
Item 7 of 72
You are responsible for replication between your central office and twelve regional nodes.
What is the best product for you to use to actively monitor thirteen GoldenGate TDM
instances and configure email alerts based on process status?
A. Oracle GoldenGate Director
B. Oracle GoldenGate Transactional Data Management
C. Oracle GoldenGate veridata
D. Oracle GoldenGate Monitor
Answer: A
Explanation:
http://surveycenter-tsainc-com/pdfs/GGateDirector_DataSheet-pdf
Answer: A
http://surveycenter-tsainc-com/pdfs/GGateDirector_DataSheet-pdfhttp://surveycenter-tsainc-com/pdfs/GGateDirector_DataSheet-pdfhttp://surveycenter-tsainc-com/pdfs/GGateDirector_DataSheet-pdf -
7/21/2019 1z0-539 - Sem Imagens
8/72
Item 8 of 72
What three types of information are reported in discard file?
A. The details of the discarded records
B. The database error message
C. The trail file sequence number
D. Runtime statistics
Answer: ABC
Explanation:
Reference:
http://download-oracle.com/docs/cd/E15881_01/doc.104./gg_troubleshooting_v104-pdf
Answer: A,B and C
http://download-oracle.com/docs/cd/E15881_01/doc.104./gg_troubleshooting_v104-pdfhttp://download-oracle.com/docs/cd/E15881_01/doc.104./gg_troubleshooting_v104-pdfhttp://download-oracle.com/docs/cd/E15881_01/doc.104./gg_troubleshooting_v104-pdf -
7/21/2019 1z0-539 - Sem Imagens
9/72
Item 9 of 72
How do you control the size of the buffer that contains data extracted from?
A. TRANLOGOPTIONS ASMBUFSIZE
B. DBOPTIONS ASMBUFSIZE
C. TRANLOGOPTIONS BUFSIZE
D. DBOPTIONS BUFSIZE
Answer: C
Explanation:
Reference
http://download.oracle-com/docs/cd/E15881_01/doc-104lgg_wux_ref_v104.pdf
Answer: C
http://download.oracle-com/docs/cd/E15881_01/doc-104lgg_wux_ref_v104.pdfhttp://download.oracle-com/docs/cd/E15881_01/doc-104lgg_wux_ref_v104.pdfhttp://download.oracle-com/docs/cd/E15881_01/doc-104lgg_wux_ref_v104.pdf -
7/21/2019 1z0-539 - Sem Imagens
10/72
Item 10 of 72
In addition to using the parameter comment to enter remarks in parameter file(s) can be
used?
A. --
B. //
C. \\
D. /*
Answer: A
Answer: A
-
7/21/2019 1z0-539 - Sem Imagens
11/72
Item 11 of 72
What is GGSCI an acronym for?
A. GoldenGate secure command interface
B. GoldenGate software command interface
C. GoldenGate software connection interface
D. GoldenGate secure connection interface
Answer: B
Explanation:
Reference:
http://gavinsbrmacomltaglggscil
Answer: B
http://gavinsbrmacomltaglggscil/http://gavinsbrmacomltaglggscil/http://gavinsbrmacomltaglggscil/ -
7/21/2019 1z0-539 - Sem Imagens
12/72
Item 12 of 72
What is the default threshold for message compression in OGG?
A. 1000
B. 100
C. 0
D. By default messages are not compressed.
Answer: A
Explanation:
Reference:
http://download.oracle-com/docs/cd/E15881_01/doc-104Jgg_wux_ref_v104.pdf
Answer: A
http://download.oracle-com/docs/cd/E15881_01/doc-104Jgg_wux_ref_v104.pdfhttp://download.oracle-com/docs/cd/E15881_01/doc-104Jgg_wux_ref_v104.pdfhttp://download.oracle-com/docs/cd/E15881_01/doc-104Jgg_wux_ref_v104.pdf -
7/21/2019 1z0-539 - Sem Imagens
13/72
Item 13 of 72
Which transactions are captured if you ADD EXTRACT BEGIN now 1:00 p.m., but START
EXTRACT at 2:00 p.m.?
A. Transactions started on or after 1:00 pm.
B. Transactions started on or after 2:00 pm.
C. Transactions started before 1:00 p.m. and committed after 1:00 p.m.
D. Transactions started before 1:00 p.m and committed after 2:00 p.m.
Answer: D
Explanation:
The START EXTRACT starts the Extract and Data Pump processes.
Reference:
http://wvvw.pythian-com/news/7959/oracle~goldengateoinstallation-part-1I
Answer: A
http://wvvw.pythian-com/news/7959/oracle~goldengateoinstallation-part-1Ihttp://wvvw.pythian-com/news/7959/oracle~goldengateoinstallation-part-1Ihttp://wvvw.pythian-com/news/7959/oracle~goldengateoinstallation-part-1I -
7/21/2019 1z0-539 - Sem Imagens
14/72
Item 14 of 72
Which statements are true for a two-node, active-active OGG replication configuration?
Both databases may be live and processing transactions.
The two databases must be homogeneous.
Low latency reduces the risk of conflicts.
A. 1 and 2
B. 2 and 3
C. 1 and 3
D. 1, 2 and 3
Answer: B
Explanation:
Reference:
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTlON_ID:2812197300346109
609
Answer: C(*) or D
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTlON_ID:2812197300346109609http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTlON_ID:2812197300346109609http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTlON_ID:2812197300346109609http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTlON_ID:2812197300346109609http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTlON_ID:2812197300346109609 -
7/21/2019 1z0-539 - Sem Imagens
15/72
Item 15 of 72
Which best describes the function of OGG user tokens?
A. User-defined variables
B. Security tokens
C. User privileges
D. User-defined functions
Answer: B
Answer: A
-
7/21/2019 1z0-539 - Sem Imagens
16/72
Item 16 of 72
You have configured and added the extract and Replicate tasks using the direct load method
what do you need to do to get the processes up and running?
A. Start the Extract task.
B. Start the Extract task and then start the Replicat task.
C. Start the Extract task, wait for it to stop and than start the
Replicate task.
D. Start the Replicat task
Answer: B
Explanation:
Reference:
http://gavinsoormacom/2010/02/oracle~goldengatetutorial-6~configuring-data-pump-
process/
Answer: B
http://gavinsoormacom/2010/02/oracle~goldengatehttp://gavinsoormacom/2010/02/oracle~goldengatehttp://gavinsoormacom/2010/02/oracle~goldengatehttp://gavinsoormacom/2010/02/oracle~goldengatehttp://gavinsoormacom/2010/02/oracle~goldengate -
7/21/2019 1z0-539 - Sem Imagens
17/72
Item 17 of 72
When would you use the PASSTHRU parameter?
A. When using a data pump to distribute all of the trail data "as is"
to a remote system.
B. When Extract is processing database transaction logs where you have
a remote database connection.C. For a SPECIALRUN one-time processing task that is doing an initial
load.
D. When Extract is processing database transaction logs and writing to
a local trail that will be read by a local Replicat.
Answer: A
Explanation:
Reference:
http://download.oracle.com/docs/cdlE15881_01/doc.104Jgg_wux_ref_v104-pdf
Answer: A
http://download.oracle.com/docs/cdlE15881_01/doc.104Jgg_wux_ref_v104-pdfhttp://download.oracle.com/docs/cdlE15881_01/doc.104Jgg_wux_ref_v104-pdfhttp://download.oracle.com/docs/cdlE15881_01/doc.104Jgg_wux_ref_v104-pdf -
7/21/2019 1z0-539 - Sem Imagens
18/72
Item 18 of 72
What three are valid responsibilities of the OGG Manager?
A. Cleaning up GoldenGate trails.
B. Starting dynamic processes, such as Server Collectors, Extracts,
replicates.
C. Error and lag reporting.D. Communicating with other GoldenGate Manager processes
Answer: ABC
Explanation:
Reference:
http://gavinsoormacom/2010/02/goldengate-tutorial-3-configuring-the-manager-process/
http://space.itpub.net/1%0248%702/viewspace-624577
Answer: A, B and C
-
7/21/2019 1z0-539 - Sem Imagens
19/72
Item 19 of 72
Which parameter could you use to start an Extract when Manager starts?
A. START
B. BEGIN
C. AUTOSTART
D. PROCESS
Answer: C
Explanation:
Reference:
http://download-oracle.corn/docs/cd/E15881_01/doc-104Jgg_wux_ref_v104-pdf
Answer: C
http://download-oracle.corn/docs/cd/E15881_01/doc-104Jgg_wux_ref_v104-pdfhttp://download-oracle.corn/docs/cd/E15881_01/doc-104Jgg_wux_ref_v104-pdfhttp://download-oracle.corn/docs/cd/E15881_01/doc-104Jgg_wux_ref_v104-pdf -
7/21/2019 1z0-539 - Sem Imagens
20/72
Item 20 of 72
Which statement correctly explains when you would use ASSUMETARGETDEFS?
A. The target tables are already created.
B. Only the fields in the target tables are mapped.
C. The source and target tables have identical data structure.
D. You have specified wildcards in either the TABLE or MAP parameters
Answer: C
Explanation:
Reference:
http://download-oracle.com/docslcd/E15881_01/doc-104lgg_wux_ref_v104-pdf
Answer: C
-
7/21/2019 1z0-539 - Sem Imagens
21/72
Item 21 of 72
Which three can GoldenGate encrypt?
A. Extract to Server messages
B. Trails
C. Passwords
D. Redo logs
Answer: ABC
Explanation:
Reference:
http://download-oracle-com/docs/cdlE15881_01ldoc.104/gg_wux_ref_v104.pdf
Answer: A, B and C
-
7/21/2019 1z0-539 - Sem Imagens
22/72
Item 22 of 72
In order to add delete Replicat processes without specifying a checkpoint table, Gerald has
edited the GLOBALS parameter file. To get the change to take effect, Gerald exits from the
GGSCI command line, but GGSCI fails to restart- Which solution is most likely to solve Gerald's
problem?
A. Use a text editor to check the GLOBALS file for syntax errors and
fix them
B. Use the cleanup replicat command
C. Verify that Oracle environment variables are set correctly
D. Add the Oracle GoldenGate Installation directory to the system PATH
Answer: A
Answer: A
-
7/21/2019 1z0-539 - Sem Imagens
23/72
Item 23 of 72
You have a source installation of OGG 10 that includes an initial extract and datapump to
provide a remote trail formatted for a GoldenGate 9.5 Replicat process to consume, which
process should be use to convert the data to the earlier format?
A. From the first Extract process
B. From the Data Pump process
C. From replicate process
D. This feature is not supported in GoldenGate 10.
Answer: A
Explanation:
Reference:
http://download.oracle-com/docs/cd/E1S881_01/doc.104/gg_upgrade_v104-pdf
Answer: A
-
7/21/2019 1z0-539 - Sem Imagens
24/72
Item 24 of 72
What is the name and the location of the file that lists the key values used by extract for
encryptions and Server Collector for decryption?
A. KEYGEN file in the GoldenGate data location
B. COBGEN file in the GoldenGate installation location
C. GGSKEY file in the GoldenGate data location
D. GGSKEY file in the GoldenGate installation location
E. ENCKEYS file in the GoldenGate installation location
Answer: E
Explanation:
Reference:
http://download-oracle-com/docslcd/E15881_01/doc.104lgg_wux_ref_v104.pdf
Answer: E
-
7/21/2019 1z0-539 - Sem Imagens
25/72
Item 25 of 72
What GoldenGate facility allows for custom processing in response to a data value?
A. DDLGEN
B. GGSExec
C. User Exits
D. User Tokens
Answer: C
Explanation:
Reference
http://download.oracle.com/docs/cd/E15881_01/doc.104Jgg_wux_ref_v104.pdf
Answer: C
-
7/21/2019 1z0-539 - Sem Imagens
26/72
Item 26 of 72
You are configuring replication between two Oracle tables with the same number of columns,
column table names, and data types, but in different orders- For replication purpose can you
treat these as identical tables?
A. No
B. Yes, ifthe source and target Oracle versions and character sets are
the same.
C. Yes
D. Yes, as long as the source table has a primary key defined
Answer: D
Answer: C(*) or D ?
-
7/21/2019 1z0-539 - Sem Imagens
27/72
Item 27 of 72
Which parameters would be used for one-time initial replicat?
A. PASSTHRU
B. SOURCEISFILE
C. CHECKMINUTES
D. SOURCEISTABLEE. SPECIALRUN
Answer: E
Explanation:
Reference:
http://download.oracle.com/docs/cd/E15881_01/doc-104./gg_wux_ref_v104.pdf
Answer: E
-
7/21/2019 1z0-539 - Sem Imagens
28/72
Item 28 of 72
What process is the recommended method to purge old GoldenGate trails?
A. Extract
B. Replicat
C. Manager
D. Manager and Replicat
Answer: C
Explanation:
Reference:
http://forums.oracle.com/forums/thread.jspa?messageID=9297810
Answer: C
-
7/21/2019 1z0-539 - Sem Imagens
29/72
Item 29 of 72
Which GGSCI command(s) show all available information on both read and write checkpoint
for an Extract?
Example: 1 INFO EXTRACT
Example: 2 INFO EXTRACT , DETAIL
Example: 3 INFO EXTRACT , SHOWCH
A. Example 2 only
B. Example 3 only
C. Examples 1 and 3
D. Examples 1 and 2
Answer: B
Explanation:
Reference
http://jianmingli-com/wp/?p=1532
Answer: B
-
7/21/2019 1z0-539 - Sem Imagens
30/72
Item 30 of 72
Neither your source, nor your target table has a primary key, and you have not designated
KEYCOLS. How will the Replicat proceed to identify matching target rows to update or delete?
A. The first unique key alpha-numerically, excluding virtual columns
and nullable columns, will be treated as the primary key.
B. This configuration is not supported by GoldenGate. Replicat will
abend on updates or deletes.
C. The first column, excluding virtual columns and nullable columns,
will be treated as the pr key.
D. The combination of all fields up to the first thirty-two will be
treated as a compound primary key
Answer: A
Explanation:
Reference:
http://download-oracIe-com/docs/cdlE15881_01/doc-104lgg_syb_inst_v104-pdf
Answer: A
-
7/21/2019 1z0-539 - Sem Imagens
31/72
Item 31 of 72
Replicat is responsible for which three options?
A. Reading data out of the GoldenGate trails.
B. Performing data flow filtering.
C. Performing data transformations.
D. Check pointing the oldest uncommitted transaction.
Answer: A, B and C
Answer: A, B and C
-
7/21/2019 1z0-539 - Sem Imagens
32/72
Item 32 of 72
What file must be configured in order to use custom encryption keys?
A. ENCKEYS
B. ENCRYPT
C. GLOBALS
D. CUSTKEYS
Answer: A
Explanation:
Reference:
http://download.oracle.com/docs/cd/E15881_01ldoc.104./gg_wux_ref_v104.pdf
Answer: A
-
7/21/2019 1z0-539 - Sem Imagens
33/72
Item 33 of 72
How many Extracts can write to the same GoldGate trail?
A. Only one
B. Up to 10
C. Upto 50
D. Unlimited
Answer: A
Explanation:
http://jianmingli-com/wp/?p=1534
Answer: A
-
7/21/2019 1z0-539 - Sem Imagens
34/72
Item 34 of 72
You have source table with PRODUCT-ID column and target table with
PRODUCT_DESCRlPTlON. On the target database is a lookup table containing product codes
and corresponding description. What is good way for you to lookup the product description for
each transaction?
A. SQLEXEC
B. DBLOOKUP
C. DBLOGIN
D. SQLLOOKUP
Answer: A
Answer: A
-
7/21/2019 1z0-539 - Sem Imagens
35/72
Item 35 of 72
Which statement best describes the record image that an Extract process stores in the
GoIdenGate trail by default?
A. The new value for updated fields, the primary key for deleted rows,
the after-image for inserts
B. An image of the contents of the record after the insert, update or
delete operation
C. An after image for inserts and a before image for updates and
deletes
D. An after image for inserts and updates and a before image for
deletes
Answer: C
Answer: D (*) or C
-
7/21/2019 1z0-539 - Sem Imagens
36/72
Item 36 of 72
How does Replicat know the structure of the source tables when the target has a different
layout?
A. GoldenGate trail file contains the metadata of incoming data
B. Replicat uses an ODBC connection to connect to the source system
tables
C. Parameter file contains table layouts
D. Discard file contains table layouts
E. Source Definitions file contains table layouts
Answer: E
Explanation:
Reference:
http://gavinsoorma-com/201 0/ 02/ oracle~goldengate-tutorial-8-fi lteri ng-and-mapping-
data.html
Answer: E
http://gavinsoorma-com/201%200/%2002/%20oracle~goldengate-tutorial-8-fi%20lteri%20ng-and-mapping-data.htmlhttp://gavinsoorma-com/201%200/%2002/%20oracle~goldengate-tutorial-8-fi%20lteri%20ng-and-mapping-data.htmlhttp://gavinsoorma-com/201%200/%2002/%20oracle~goldengate-tutorial-8-fi%20lteri%20ng-and-mapping-data.htmlhttp://gavinsoorma-com/201%200/%2002/%20oracle~goldengate-tutorial-8-fi%20lteri%20ng-and-mapping-data.htmlhttp://gavinsoorma-com/201%200/%2002/%20oracle~goldengate-tutorial-8-fi%20lteri%20ng-and-mapping-data.html -
7/21/2019 1z0-539 - Sem Imagens
37/72
Item 37 of 72
You want encrypt message sent or over TCP/IP to server usserver1, where the goldenGate
manage process is running on port 7809. Your requirements include using a custom encryption
key and advanced encryption standard (AES), and you have created an ENCKEYS file What
parameters should you use?
A. This feature is not supported in oracle GoldenGate 10.
B, RMTHOST usserval, MGRPORT 7809, ENCRYPT AES, ENCRYPT KEY
C. RMTHOST usserval, MGRPORT AES, ENCRYPTKEY MYKWY, MBRPORT 7809
D. RMTHOST usserval, MGRPORT 7809, ENCRYPT BLOWFISH ENCRYPTKEY MYKEY
Answer: D
Explanation:
Reference
http://gavinsoormacorn/2010/07/goldengateencrypting-data-and-passwords/
Answer: A
-
7/21/2019 1z0-539 - Sem Imagens
38/72
Item 38 of 72
What command is issued to alter Replicat to start processing trail number 10 at relative byte
address 100345?
A. Alter , extseqno 10, extrba 100345
B. Alter Replicat *, exttrail , extseqno 10, extrba
100345
C. Alter Replicat , sequence IO, rba 100345
D. Alter , sequence 10, rba 100345
Answer: A
Explanation:
Reference:
http://download-oracle.com/docs/cd/E15881_01/doc-104Jgg_wux_ref_v104.pdf
Answer: B
http://download-oracle.com/docs/cd/E15881_01/doc-104Jgg_wux_ref_v104.pdfhttp://download-oracle.com/docs/cd/E15881_01/doc-104Jgg_wux_ref_v104.pdfhttp://download-oracle.com/docs/cd/E15881_01/doc-104Jgg_wux_ref_v104.pdf -
7/21/2019 1z0-539 - Sem Imagens
39/72
Item 39 of 72
What Oracle GoldenGate feature provides recoverability without loss of transactions?
A. Checkpointing
B. Sub-second latency
C. Two-phase commits
D. Transactional integrity
Answer: A
Answer: A
-
7/21/2019 1z0-539 - Sem Imagens
40/72
Item 40 of 72
Which process (es) maintain a checkpoint file?
A. Extract only
B. Replicat only
C. Both Extract and Replicat
D. Server collector
Answer: C
Explanation:
Reference:
http://ldbmentors-blogspotcom/2010/12/oraclegoldengate-tutorial-part-1.html
Answer: C
http://ldbmentors-blogspotcom/2010/12/oraclehttp://ldbmentors-blogspotcom/2010/12/oraclehttp://ldbmentors-blogspotcom/2010/12/oracle -
7/21/2019 1z0-539 - Sem Imagens
41/72
Item 41 of 72
What us expected behavior of CHECKPARAMS parameter?
A. The process checks the parameter syntax and then starts running.
B. The process checks the parameter syntax and then stops.
C. A report file is created listing all missing parameters.
D. A report file is created listing all default values not specifiedin the parameter file.
Answer: A
Explanation:
Reference:
http://jianmingli-com/wp/?p=1537
Answer: B
If there is a syntax failure, the process abends with GoldenGate error 190. If the syntax succeeds, the
process stops and writes a message to the report file that the parameters processed successfully.
-
7/21/2019 1z0-539 - Sem Imagens
42/72
Item 42 of 72
Which could be used to map a value stored in a user token to a target column?
A. @GETENV
B. GGHEADER
C. GGENVIRONMENT
D. @TOKEN
Answer: D
Explanation:
http: ownload-oracle-comIdocs/cd/E15881_01/doc.104./gg_wux_ref_v104.pdf
Answer: D
-
7/21/2019 1z0-539 - Sem Imagens
43/72
Item 43 of72
Nicole is preparing initial data load Extract task EINI_HR using the parameter DBOPTIONS
FETCHBATCHSIZE 2000. What is likely to happen if one of her source tables includes LOB data?
A. The Extract will revert to single-row fetch mode and then resume
array fetches afterwards.
B. The Extract will revert to single-row fetch mode for all tables.
C. The Extract will abend unless LOBMEMORY is increased.
D. The Extract will perform poorly due to paging unless LOBMEMORY is
increased.
Answer: A
Answer: A
-
7/21/2019 1z0-539 - Sem Imagens
44/72
Item 44 of 72
How would you specify the data source for a secondary Extract functioning as a data pump?
A. EXTTRAILSOURCE
B. SOURCEISTABLE
C. SOURCEISTRAIL
D. LOCTRAILSOURC
Answer: C
Answer: A
-
7/21/2019 1z0-539 - Sem Imagens
45/72
Item 45 of 72
When GoldenGate is configured for Archived Only Mode (ALO), what must be considered
configuring the middle-tier sewer for Capture?
A. The middle-tier capture server has the same endian order and bit
width
B. The middle-tier server must have a database installed on it
C. GoldenGate only supports Windows or Linux on the middle-tier server
D. GoldenGate only supports UNIX on the middle-tier server
Answer: B
Answer: B
-
7/21/2019 1z0-539 - Sem Imagens
46/72
Item 46 of 72
Which three are required to correctly configure an OGG?
A. A maximum file size
B. An extract process
C. A trail file identifier
D. Designation as local or remote
Answer: BCD
Explanation:
Reference:
http://www.biblogs.com/2010/03/22/configuring-odi-10136-to-use-oracle~golden-gate.for-
changed- data-capture/
http://www-pythian-com/news/7959/oraclegoldengate-installation-part-1I
Answer: B, C and D
-
7/21/2019 1z0-539 - Sem Imagens
47/72
Item 47 of 72
You want to configure replication of CREATE TABLE statements from oracle to Teradata, so
that only new table created in your mapped source schema is Replicated. Which should be the
part of solution?
A. This feature is not supported in oracle GoldenGate 10.
B. DDL INCLUDE MAPPED in extra parameter file.
C. DDL INCLUDE UNMAPPED in extra parameter file.
D. DDL EXCLUDE MAPPED in extra parameter file.
Answer: B
Explanation:
DDL INCLUDE MAPPED in extra parameter file. This means that DDL support is now enabled for
all tables which have been mapped
Reference
http://gjilevski.wordpress-com/2010/02/19/configuring-ddl-synchronization-with-oracle-
goldengate/
Answer: A(*) or B
-
7/21/2019 1z0-539 - Sem Imagens
48/72
Item 48 of 72
Which parameter tells Extract the tables for which to capture changes?
A. Table
B. LOGTABLE
C. MAP
D. LOG
Answer: A
Explanation:
Reference:
http:/ljianmingIi-comIwp/?p=1532
Answer: A
-
7/21/2019 1z0-539 - Sem Imagens
49/72
Item 49 of 72
How do you control the size of the buffer that contains data extracted from an ASM instance?
A. TRANLOGOPTIONS ASMBUFSIZ
B. DBOPTIONS ASMBUFSIZE
C. TRANLOGOPTIONS BUFSIZE
D. DBOPTIONS BUFSIZE
Answer: A
Explanation:
Reference
http://download.oracle-com/docs/cd/E15881_01/doc-104/gg_wux_ref_v104-pdf
Answer: A
-
7/21/2019 1z0-539 - Sem Imagens
50/72
Item 50 of 72
If your system has a firewall controlling port access which parameter can be used to control
ports used for GoldenGate processes?
A. CHILDPORTS
B. ALLOWEDPORTS
C. DYNAMICPORTLIST
D. GETPORTINFO
Answer: C
Answer: C
-
7/21/2019 1z0-539 - Sem Imagens
51/72
Item 51 of 72
To meet a business requirement for latency, Carlos wants to break long running source
transactions into shorter commits on the target database with the replicate parameter
MAXTRANSOPS what is the most important thing Carlos should consider before using
MAXTRANSOPS
A. Will business logic be lost if transaction boundaries are changed?
B. Will a large number of small commits perform better than a smaller
number of large commits?
C. Will redo buffer size on the target database be adequate for the
commit size?
D. Will the sequence of operations be affected by changing transaction
boundaries?
Answer: B
Explanation:
Reference
http://download.oracle-com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf
Answer: A(*) or B ?
-
7/21/2019 1z0-539 - Sem Imagens
52/72
Item 52 of 72
Which three types of information are stored in the GoldenGate trail header?
A. Before or after image indicator
B. Data type (e.g. integer, alphanumeric)
C. Relative byte address of the commit record
D. Time of the transaction
Answer: ABC
Explanation:
Reference:
http://download.oracle-com/docs/cd/E15881_01/doc-104lgg_wux_ref_v104.pdf
Answer: A, C and D (*) or A, B and C
-
7/21/2019 1z0-539 - Sem Imagens
53/72
Item 53 of 72
What GoldenGate process is responsible for capturing changes in the source database?
A. Manager
B. Replicate
C. Extract
D. Server Collector
Answer: C
Explanation:
Reference:
http://download-oracIe.com/docs/cdlE15881_01/doc.104/gg_wux_ref_v104.pdf
Answer: C
-
7/21/2019 1z0-539 - Sem Imagens
54/72
Item 54 of 72
CORRECT TEXT
By default, which option is evaluated first, SQLEXEC or filter statement?
A. SQLEXEC
B. FILTER
C. There is no default, it is set with the after filter | before
filter.
D. It depends on their position in the parameter file the first
encountered is executed first.
Answer: B
Answer: B
-
7/21/2019 1z0-539 - Sem Imagens
55/72
Item 55 of 72
Where can you find a list of the parameters being used by a Replicat process?
A. System logs
B. Discard file
C. Event log
D. Process report
Answer: D
Explanation:
http://gjilevski.wordpress.com/2010/02/27/monitoring-processes-and-processing-
status~in~oracle- goldengate
Answer: D
-
7/21/2019 1z0-539 - Sem Imagens
56/72
Item 56 of 72
Where is user token data stored?
A. Trail file
B. Parameter file
C. Discord file
D. Report file
Answer: A
Explanation:
Reference:
http://download-oracle-com/docs/cdlE15881_01ldoc.104/gg_wux_ref_v104.pdf
Answer: A
-
7/21/2019 1z0-539 - Sem Imagens
57/72
Item 57 of 72
Which statements are true of GoldenGate password encryption?
1. A password can be encrypted and pasted into a parameter file.
2. An encrypted password can be generated using the default key.
3.
An encrypted password can be generated using a user defined-key.
A. 1 only
B. 2 only
C. 3 only
D. 1 and 3
E. 1. 2 and 3
Answer: E
Explanation:
One of the encryption options that GoldenGate provides is to use Passwords in the extract and
replicate parameter file. Also, the encrypted password can be generated using user defined
key up to 128-bit or using the default key.Reference:
http://gavinsoorma.com/2010/07/goldengate-encrypting-data-and-passwords/
Answer: E
-
7/21/2019 1z0-539 - Sem Imagens
58/72
Item 58 of 72
You have discovered that an OGG checkpoint table has become corrupted. What is your best
strategy to recover from this?
A. Use the CONVCHK utility on the target to restore the checkpoint
table from checkpoint files.
B. Restore the target DB from backup, reposition the Extract to a
point prior to the corruption, Turn to HANDLECOLLISIONS in the
Replicat.
C. Use NODBCHECKPOINT to cause Replicat to use the checkpoint files as
backup and regenerate the checkpoint table.
D. Use the GENCHK utility on the source to restore the checkpoint
table from checkpoint files.
Answer: A
Explanation:
Reference:
http://www-outofboundstechnology-com/files/oracle/oraclegg_part3_trouble.pdf
Answer: A
-
7/21/2019 1z0-539 - Sem Imagens
59/72
Item 59 of 72
You are configuring a multi-master DDL replication environment. To prevent looping of DDL
statement like CREATE TABLE (...), the best solution is
A. Include the tranlogoptions (exclude user) parameter in each Extract
parameter file
B, Use the add FILTERTABLE command at the GGSCI prompt
C. Use DDL exclude OPTYPE (create table)in one Extract to prevent
looping
D. This feature is not supported in GoldenGate 10.
Answer: C
Explanation:
Reference:
http://download-oracle.com/docs/cd/E15881_01/doc-104/gg_wux_ref_v104.pdf
Answer: C
-
7/21/2019 1z0-539 - Sem Imagens
60/72
-
7/21/2019 1z0-539 - Sem Imagens
61/72
Item 61 of72
Which OGG process (es) can change data in database?
A. Replicat only
B. Extract only
C. Extract and Replicat
D. Extract, Replicat and Manager
Answer: C
Explanation:
Reference
http://download-oracIe-com/docs/cd/E15881_01ldoc-104Jgg_wux_ref_v104.pdf
Answer: A
-
7/21/2019 1z0-539 - Sem Imagens
62/72
Item 62 of 72
What is the default format for a GoldenGate trail?
A. ASCII: ASCII format
B. INPUT ASCII: from 1to 127 representing ASCII characters
C. SQL: SQL statements
D. CDF: Canonical Data formatE. XML: XML statement
Answer: A
Answer: D(*) or A?
-
7/21/2019 1z0-539 - Sem Imagens
63/72
Item 63 of 72
What GoIdenGate process writes to RMTTRAILS?
A. Server/Collector
B. Extract
C. Pump
D. ReplicatE. All of the above
Answer: B
Explanation:
Reference:
http://hi.baidu.com/nich4lbIog/item/19a3e81cad1ff7bb4bedbc50-htmI
Answer: C(*) or B?
-
7/21/2019 1z0-539 - Sem Imagens
64/72
Item 64 of 72
Which command forces a running Extract to close the current trail and start writing to the next
trail sequence number?
A. ALTER EXTTRAIL , NEXT SEQNO
B. ALTER EXTTRAIL , ROLLOVER
C. SEND EXTRACT , ETROLLOVER
D. SEND EXTRACT , ROLLOVER
Answer: D
Explanation:
Reference
http://download-oracIe.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf
Answer: D
-
7/21/2019 1z0-539 - Sem Imagens
65/72
Item 65 of 72
What could you use to formal 123456789 to format of social security number 123-456-789?
A. @STRCAT
B. @STEXT
C. @strext and @strcat
D. @STRFIND
Answer: C
Explanation:
Reference:
http://download-oraclecom/docs/cd/E15881_01/doc-104Jgg_wux_ref_v104.pdf
Answer: C
-
7/21/2019 1z0-539 - Sem Imagens
66/72
Item 66 of 72
By default which type of Operations are captured by extract?
A. Inserts, updates, deletes, and table Operations such as CREATE
TABLE
B. Inserts, compresses, and updates
C. Inserts, updates, deletes, and table Operations such as ADD COLUMND. Inserts only
E. Inserts, updates, and deletes
Answer: E
Explanation:
Reference:
httpzllwww.Iabo-oracle.com/PresentatiOn-Of-OraCIe-GOIdenGate
Answer: E
-
7/21/2019 1z0-539 - Sem Imagens
67/72
Item 67 of 72
Ideally which process should be configured purge old trail files?
A. Manager
B. Extract
C. Replicat
D. Pump
Answer: A
Explanation:
Reference:
http://download.oraclecom/docs/cdJE15881_01/doc-104Jgg_wux_ref_v104.pdf
Answer: A
-
7/21/2019 1z0-539 - Sem Imagens
68/72
Item 68 of 72
Which statement correctly describes GoldenGate Extract and Replicat process reports?
A. By default process reports are named for the Extract or Replicat
group and up to 99 old reports can be saved depending on the REPORTUM
parameter.
B. By default process reports are named for the Extract or Replicatgroup and up to 10 old reports are kept.
C. Process reports take the name set by the Optional report parameter
of the ADD extract replicat command and up to 99 old reports can be
saved depending on the REPORTNUM parameter.
D. Process reports take the name set by the required report file
parameters and up to 10 old reports will be saved.
Answer: D
Explanation:
http://download-oracle-comldocs/cdJE15881_01/doc-104/gg_wux_ref_v104-pdf
Answer: B(*) or D
-
7/21/2019 1z0-539 - Sem Imagens
69/72
Item 69 of 72
Where are GoIdenGate macros defined?
A. Macros can be defined in the parameter file or included in a macro
file
B. Macros are defined in the GLOBALS parameter file
C. Macros are placed in a file and referenced using an environmentvariable.
D. Macros are declared, compiled and referenced via Golden Gate's user
exits.
Answer: A
Explanation:
Reference:
http://download.oracIe.com/docs/cd/E15881_01ldoc.104/gg_nsk_admin_v10-pdf
Answer: A
-
7/21/2019 1z0-539 - Sem Imagens
70/72
Item 70 of 72
What parameter provides options for compression and encryption?
A. RMTHOST
B. TARGET
C. TCPIP
D. TARGET DB
Answer: A
Explanation:
Reference
httpz//download-oracIecom/docs/cdlE15881_01/doc.104/gg_wux_ref_v104.pdf
Answer: A
-
7/21/2019 1z0-539 - Sem Imagens
71/72
-
7/21/2019 1z0-539 - Sem Imagens
72/72
Item 72 of 72
ln GoldenGate terms, what is the definition of Extract lag?
A. The difference in time between when a change is made to source data
and when that change is reflected in the target data.
B. The difference in time between the current times at the target
system.C. The difference in time between when a change record is received at
the target system and when the change is reflected in the target data.
D. The difference in time between when a change record is processed by
the extract and the timestamp of the record in the data source.
Answer: D
Explanation:
Reference
http://download-oracle.com/docs/cd/E15881_01/doc.104Jgg_wux_ref_v104.pdf
Answer: D
http://download-oracle.com/docs/cd/E15881_01/doc.104Jgg_wux_ref_v104.pdfhttp://download-oracle.com/docs/cd/E15881_01/doc.104Jgg_wux_ref_v104.pdfhttp://download-oracle.com/docs/cd/E15881_01/doc.104Jgg_wux_ref_v104.pdf