1Y0-A19

18
Question: 1 Scenario: A customer needs to configure a XenDesktop environment so that an end user has the best experience when launching a virtual desktop. The environment needs to be configured with fault tolerance so that when a XenServer goes down for maintenance the target device can still be deployed by any XenServer with least load. Currently, the customer has a XenServer pool consisting of 16 XenServer hosts with 8 GB of memory and a 2 TB SATA hard disk. A 2 TB Fibre Channel Storage Area Network is attached to the XenServer. The Provisioning services host is configured on a stand-alone server with 8 GB of memory and three 500 GB iSCSI hard disks configured as a RAID 5 configuration. What is the best write caching method for deploying 800 target devices within a XenServer pool? A. Cache on the target device and redirect to the RAM of the target device. B. Cache on the Provisioning services host and redirect the cache on the local file system. C. Cache on the target device and redirect the cache on a share within the Fibre Channel storage repository. D. Cache on the Provisioning services host and redirect the cache on a share within the Fibre Channel storage repository. Answer: C Question: 2 In a Provisioning services environment, what is the default location of the write cache if no location is specified manually? A. RAM of the target device B. Local drive of the target device C. A subdirectory in the vDisk location D. A subdirectory in the default Provisioning services installation path Answer: C Question: 3 An administrator is planning a XenDesktop 5 Quick Deploy to demonstrate superior end user experience. What should be considered when planning the Quick Deploy? A. SQL Server 2008 R2 should first be installed and configured on the server that will run the Controller. B. The SQL Server 2005 database for the XenDesktop site should be located on the same subnet as the Controller.

Transcript of 1Y0-A19

Page 1: 1Y0-A19

Question: 1

Scenario: A customer needs to configure a XenDesktop environment so that an end user has the best

experience when launching a virtual desktop. The environment needs to be configured with fault

tolerance so that when a XenServer goes down for maintenance the target device can still be

deployed by any XenServer with least load.

Currently, the customer has a XenServer pool consisting of 16 XenServer hosts with 8 GB of memory

and a 2 TB SATA hard disk. A 2 TB Fibre Channel Storage Area Network is attached to the XenServer.

The Provisioning services host is configured on a stand-alone server with 8 GB of memory and three

500 GB iSCSI hard disks configured as a RAID 5 configuration.

What is the best write caching method for deploying 800 target devices within a XenServer pool?

A. Cache on the target device and redirect to the RAM of the target device.

B. Cache on the Provisioning services host and redirect the cache on the local file system.

C. Cache on the target device and redirect the cache on a share within the Fibre Channel storage

repository.

D. Cache on the Provisioning services host and redirect the cache on a share within the Fibre Channel

storage repository.

Answer: C

Question: 2

In a Provisioning services environment, what is the default location of the write cache if no location is

specified manually?

A. RAM of the target device

B. Local drive of the target device

C. A subdirectory in the vDisk location

D. A subdirectory in the default Provisioning services installation path

Answer: C

Question: 3

An administrator is planning a XenDesktop 5 Quick Deploy to demonstrate superior end user

experience. What should be considered when planning the Quick Deploy?

A. SQL Server 2008 R2 should first be installed and configured on the server that will run the

Controller.

B. The SQL Server 2005 database for the XenDesktop site should be located on the same subnet as

the Controller.

Page 2: 1Y0-A19

C. The hypervisor should be located on the same subnet as the SQL Server 2008 R2 database for the

XenDesktop site.

D. SQL Express 2008 R2 should be installed as a prerequisite on the Controller running Microsoft

Windows Server 2008.

Answer: A

Question: 4

Scenario: A company has two sites about 3000 miles apart, one in New York and the other in Los

Angeles. Each site has 1500 users. XenDesktop site access must be available for all the users at both

locations. High availability is required so on single point of failure is acceptable.

A minimum of ______ XenDesktop Controller(s) and ______ Provisioning services host(s) are

necessary to support all 3000 users given the requirements. (Choose the correct option to complete

the sentence.)

A. 1, 1

B. 2, 2

C. 3, 3

D. 4, 4

Answer: B

Question: 5

According to Citrix best practices, which storage type should an administrator use to set up a

XenDesktop environment using XenServer?

A. NFS

B. CIFS

C. NTFS

D. Clustered Shared Volume

Answer: A

Question: 6

Which three storage type can XenServer use for the virtual machine disks if migrating virtual

machines without downtime is required? (Choose three.)

A. CSV

B. NFS

C. iSCSI

Page 3: 1Y0-A19

D. Local Disk

E. Fibre Channel

Answer: B,C,E

Question: 7

An administrator needs to configure port exceptions to allow the collection of Windows metrics

using the Windows Remote Management 2.0 service. Which port must the administrator forthis

environment?

A. 1494

B. 3389

C. 4752

D. 5985

Answer: D

Question: 8

Scenario: An administrator configured a master virtual machine and created a pooled catalog with a

desktop group. The administrator discovered that antivirus software was not installed on the master

virtual machine.

How would the administrator update the image pool to include antivirus software for the pooled

desktops with the least amount of administrative effort?

A. Recreate the master virtual machine and install the antivirus software.

B. Install the antivirus software on the master virtual machine, then update the catalog.

C. Convent the master virtual machine to a template and install antivirus software on the template.

D. Install the antivirus software on the master virtual machine, take a snapshot of the virtual machine

and assign the snapshot to the catalog.

Answer: C

Question: 9

When installing XenDesktop 5 using the Quick Deploy method, ______. (Choose the correct phrase to

complete the sentence.)

A. all of the components must be installed on the same server

B. the master virtual machine must be running on XenServer 5.5 or higher

C. the master virtual machine must be a member of the same domain as the Controller

Page 4: 1Y0-A19

D. all of the components that need to be installed are the XenDesktop Controller, Desktop Studio and

the license server

Answer: A

Question: 10

Which two pieces of information must be supplied to install Provisioning services and connect to a

SQL Express database? (Choose two.)

A. File group

B. Host name

C. Port number

D. Instance name

Answer: B,D

Question: 11

An administrator using a third-party firewall needs to manually reconfigure the firewall to allow port

3389 in order to permit ______. (Choose the correct option to complete the sentence.)

A. HDX communication

B. database communication

C. shadowing through Desktop Director

D. remote assistance through Desktop Studio

Answer: C

Question: 12

An administrator needs to create a Mictosoft Windows 7 template for a XenDesktop environment

and has already created a virtual machine with Microsoft Windows 7.

Which step must the administrator take next before converting the virtual machine to a template?

A. Restart the virtual machine.

B. Restart the virtual hard disk.

C. Suspend the virtual hard disk.

D. Shut down the virtual machine.

Answer: D

Question: 13

Page 5: 1Y0-A19

How can an administrator remotely access a Controller in a XenDesktop environment in order to

assign a dedicated desktop to a new user?

A. Install the Controller software on the server being used to access the Controller and point it to the

appropriate Controller.

B. Install Desktop Studio on the server being used to access the Controller and point Desktop Studio

to the appropriate Controller.

C. Install Web Interface on the server being used to access the Controller and log on to be the

appropriate Controller through Web Interface.

D. Install Desktop Director on the server being used to access the Controller and use Desktop

Director to log on to the appropriate Controller.

Answer: D

Question: 14

Which HDX MediaStream policy setting must an asministrator configure to adjust the quality of Flash

content rendered on session hosts?

A. Flash (client-side)

B. Flash (server-side)

C. Multimedia Acceleration

D. Multimedia Acceleration buffer size

Answer: B

Question: 15

Which user action is prevented by enabling the client clipboard redirection policy?

A. Uploading images from the Internet to a user session

B. Downloading images from the server to a user session

C. Copying and pasting between applications within user sessions

D. Copying and pasting between user sessions and the local machine

Answer: C

Question: 16

An administrator must configure the Web Interface in order to allow users to access applications,

virtual desktops and online content by clicking icons on their desktops or start menus.

Which Wen Interface site must the administrator configure to meet the requirements of this

environment?

Page 6: 1Y0-A19

A. XenApp Web

B. XenApp Services

C. XenDesktop Web

D. Desktop Appliance

E. XenDesktop Services

Answer: B

Question: 17

Scenario: An administrator needs to ensure that end users can only access their client's default

printer during sessions. The administrator set the Auto-create client printers policy setting to 'Auto-

create the client's default printer only'.

Which additional policy setting must the administrator ensure is set to 'Allowed'?

A. Default printer

B. Client printer redirection

C. Direct connections to print

D. Retained and restored client printers

Answer: B

Question: 18

Scenario: An administrator created a catalog for virtual desktop infrastructure (VDI) using

Provisioning services. The catalog contains 500 desktops, and a desktop group contains 200 desktop

from this catalog. The Power Time Scheme for this desktop group is set to the default. Fifty desktops

are in use. How many desktop are in the 'off' state?

A. 15

B. 75

C. 135

D. 150

Answer: C

Question: 19

Scenario: Several and users in an environment experienced issues with their desktops. The

administrator investigated the issue and determined that the issue reported was coming from five

specific desktops in a pooled-random desktop group.

What should the administrator do to prevent the users from getting those desktops?

Page 7: 1Y0-A19

A. Delete the desktops from the catalog

B. Put the desktops in maintenance mode

C. Suspend the desktops in the desktop group

D. Restart the desktops from Desktop Director

Answer: B

Question: 20

Under which circumstance should an administrator monitor the Virtual Desktop Agent unregistered

session state?

A. Users are using multiple sessions

B. Users CANNOT access their desktops

C. A server has only a few licenses left to allocate

D. Sessions are NOT disconnecting after an idle timeout

Answer: D

Question: 21

The Virtual Desktop Agent (VDA) is not able to register with the Controller.Which pair of files must be

modified on the VDA and Controller to enable logging and help resolve this issue?

A. CdslmaProxy.exe.config on the VDA and CdsPoolMgr.exe.config on the Controller

B. CdslmaProxy.exe.config on the VDA and CdsController.exe..config on the Controller

C. WorkstationAgent.exe.config on the VDA and CdsPoolMgr.exe.config on the Controller

D. WorkstationAgent.exe.config on the VDA and CdsController.exe..config on the Controller

Answer: D

Question: 22

Scenario: Users are reporting slow log on when connecting to a virtual desktop. The administrator

discovers that all target devices using a particular vDisk are experiencing a large number of retries.

A. TCP task offload is enabled

B. The Web Interface server is down

C. Network drivers on the device need to be updated

D. The device does NOT have an Active Directory computer account

Answer: A

Page 8: 1Y0-A19

Question: 23

The Virtual Desktop Agent (VDA) is not able to register with the Controller.

Which two things must be validated to resolve this issue? (Choose two)

A. Errors are found within the Event Viewer of the VDA and the Controller.

B. The SQL Client is installed on the VDA and can reach the site database

C. IPv6 is enabled and bound to the network adapter used by the Controller

D. The location of the Controller is specified correctly in the registry and DNS resolution is successful

Answer: A,D

Question: 24

An end user informed to the help desk that even though a USB device is plugged into the client

device, the USB icon is dimmed.

Which two issues caused this to happen? (Choose two)

A. The user is attempting to use an isochronous device.

B. The USB drive was NOT mapped on the client device

C. The XenDedktop policy does NOT allow USB device redirection

D. Specific client user preferences for USB redirection were NOT set

Answer: C,D

Question: 25

An administrator is configuring a master image and knows that the end users accessing it will need to

use WinZip. Which delivery mechanism should the administrator use to deliver WinZip to the users?

A. Stream WinZip to a XenApp server.

B. Install WinZip on the XenClient image.

C. Host WinZip in a XenApp environment.

D. Install WinZip on the master image locally.

Answer: D

Question: 26

An administrator needs to ensure that when user desktops are not in use at busy times of the day,

they are added back into the idle pool. How should the administrator accomplish this task?

A. Set 'When logged off' to ten minutes/shutdown under 'During peak hour'.

Page 9: 1Y0-A19

B. Set 'When disconnected' to five minutes/suspend under 'During peak hours'.

C. Set 'When logged off' to twenty minutes/shutdown under 'During off-peak hours'.

D. Set 'When disconnected' to fifteen minutes/suspend under 'During off-peak hours'.

Answer: A

Question: 27

Which action must an administrator take before implementing HDX MediaStream Flash Redirection?

A. Install the Flash Player on the server.

B. Stream the Flash Player to the server.

C. Install the Flash Player on the user device.

D. Stream the Flash Player to the user device.

Answer: A

Question: 28

Which set of steps must be completed to configure a target device to start up from a vDisk?

A. Add target device to a site, assign a vDisk to the device and set device to start up from vDisk.

B. Add target device to a collection, assign a vDisk to the device and set device to start up from vDisk.

C. Add target device to a site, assign a vDisk to the device and configure the vDisk to use private

image access mode.

D. Add target device to a collection, assign a vDisk to the device and configure the vDisk to use

standard image access mode.

Answer: D

Question: 29

Scenario: An administrator needs to create a catalog. Provisioning services-based virtual machines

will be imported into the catalog. Which machine type must the administrator select when creating

the catalog?

A. Pooled

B. Existing

C. Streamed

D. Dedicated

Answer: C

Question: 30

Page 10: 1Y0-A19

Scenario: The design for an environment requires that Web Interface is load balanced actoss multiple

servers. An administrator has been asked to configure one master site and to distribute the

configuration of that site throughout the Web Interface implementation.

Which two steps must the administrator take in order to share the master site's configuration?

(Choose two.)

A. Edit the boot strap configuration file of the other sites to point to the IP address of the master site.

B. Set up file sharing permission to allow access over the network to the configuration folder of the

master site.

C. Replace the configuration files of the other sites with the master site's configuration file to ensure

they point to the same configuration.

D. Change the setting of the configuration location parameter of the other sites to point to the

absolute network path of the master site's configuration.

Answer: B,D

Question: 31

Scenario: An administrator configured the Client fixed drives policy setting to allow all end users to

access or save files to fixed drives on their user devices. Users are still unable to map client fixed

drives, and they cannnot access the fixed drives manually.

Users are unable to map and access fixed drives on their user devices because ______ and ______.

(Choose the two correct phrases to complete the sentence.)

A. asynchronous writes are NOT enabled

B. client drive letters are NOT being preserved

C. the Client drive redirection policy setting is NOT enabled

D. the Auto connect client drives policy setting is NOT enabled

Answer: C,D

Question: 32

Which two items are needed for an administrator to create a catalog for exsting machines in a

XenDesktop environment? (Choose two.)

A. Virtual machines available in the datacenter.

B. Active Directory computer accounts for the machines.

C. Device collections configured to load the vDisk over the network.

D. A Provisioning services deployment with a vDisk imaged from the master target device

Answer: A,B

Page 11: 1Y0-A19

Question: 33

Which two components must an administrator install on a master image that will be used for

streamed machines? (Choose two.)

A. Receiver

B. Online plug-in

C. Virtual Desktop Agent

D. Provisioning services target device

Answer: C,D

Question: 34

An administrator made changes to a vDisk image and now needs the vDisk to use the original image

instead of the updated image. How could the administrator accomplish this task?

A. Unmount the vDisk, create a copy of the image, apply the rollback file to the copy, remount the

vDisk and change the Class and Type of the vDisk.

B. Copy the rollback file to the updates folder, use the 'Schedule Automatic Disk Updates' option and

select 'Check for incremental updates' on the server.

C. Apply the delta file to the updated image, use the 'Enable Automatic Update for this vDisk' option

and select 'Check for automatic updates' on the server.

D. Put the vDisk in Private image mode, change the version numbers back to the original vDisk image

version numbers and put the vDisk back in Standard image mode.

Answer: B

Question: 35

Which two components does Citrix recommend an administrator install on a master image for

optimal application access? (Choose two.)

A. Online plug-in

B. Offline plug-in

C. EdgeSight agent

D. Provisioning services target device

Answer: A,B

Question: 36

How can an administrator reallocate an assigned virtual desktop to a new employee?

A. Edit the desktop group, go to the users page and add the new employee.

Page 12: 1Y0-A19

B. Search for the desktop in Desktop Director, edit the desktop and add the new employee.

C. Select the appropriate catalog, find the machine in the catalog and add the new employee.

D. Find the appropriate desktop in the desktop group, clink on 'Change user' and add the new

employee.

Answer: A

Question: 37

In Desktop Director, which filter shows an administrator the number of end users connected to a

certain desktop group within a XenDesktop environment?

A. View All within the machine panel

B. View the desktop group in the usage panel

C. View connections in the infrastructure panel

D. View real time data in the desktop group details panel

Answer: B

Question: 38

An administrator was informed by multiple users who access desktops in a desktop group that the

time on the desktops is incorrect. How can the administrator fix the time on the desktops?

A. Edit the desktop group and change the time zone in 'Edit user settings'.

B. Put the dedktops in maintenance mode and then change the time zone on each desktop.

C. Edit the catalog that was used to create the desktop group with the correct time for the desktops.

D. Put the vDisk image used by the desktops in Private image mode then change the time on the

image.

Answer: D

Question: 39

Which database setup results in the least amount of database downtime? ace the options in order,

starting with the setup which results in the least downtime. Click the Done button when finished.

Click the? button for instructions on how to complete a drag and drop item.

Page 13: 1Y0-A19

A.

1. A. Virtual Machine based High Availability using Hypervisors and shared storage

2. SQL Server Clustering

3. SQL Server Mirroring

4. Rebuild the database from a backup

Answer: A

Question: 40

Which policy takes precedence when a Citrix policy contradicts an Active Directory GPO policy?

A. The Citrix policy

B. The higher priority policy

C. The most restrictive policy

D. The Active Directory GPO policy

Answer: C

Question: 41

Which two tools can an administrator use to modify policy settings in a XenDesktop environment?

(Choose two.)

A. Desktop Studio

B. System Registry

Page 14: 1Y0-A19

C. Desktop Director

D. Group Policy Editor

Answer: A,D

Question: 42

Which administrative role can manage catalogs and build virtual desktops?

A. Machine administrator

B. Help desk administrator

C. Read-only administrator

D. Desktop group administrator

Answer: A

Question: 43

An administrator configured the automatic disk image update feature, but has since noticed that

changes to vDisks are not being replicated automatically. What could be a reason for this behavior?

A. The vDisks assigned to the target devices are in private image mode.

B. The target devices need to be reconfigured to point to the new vDisk files.

C. The target device has NOT restarted since the changes were applied to the vDisk.

D. There is more than one vDisk from the same Provisioning services host with the same Class.

Answer: A

Question: 44

Which three Citrix services need to be running on the Controiler to create virtual machines using the

Machine Creation Services? (Choose three.)

A. Host

B. AD identity

C. Configuration

D. Machine identity

E. Machine Creation

Answer: B,D,E

Question: 45

Page 15: 1Y0-A19

An administrator noticed that the virtual desktop became unresponsive while the target device was

starting up to the operating system. What caused this issue?

A. The vDisk is in private image mode.

B. Citrix AD Identity Service is NOT running.

C. Citrix PVS Stream Service is NOT running.

D. Antivirus software was NOT installed on the device.

Answer: C

Question: 46

Scenario: A domain user has been assigned three desktops in a pooled desktop group. The users is

able to connect to two of the three desktops simultaneously, but when attempting to connect to the

third one, the user gets an error message saying it is unavailable.

What is the cause of this issue?

A. All of the desktops in the group are in use by other users.

B. The Auto Add feature to the desktop group is NOT enabled.

C. The users policy overrides the number of desktops granted to only two.

D. Web Interface is NOT configured to support more than two simultaneous connections.

Answer: A

Question: 47

Which two issues can an administrator use XDPing to resolve? (Choose two.)

A. Time difference between the Virtual Desktop Agent and the Controller.

B. Any errors within the Event Viewer of the Virtual Desktop Agent and the Controller.

C. The connection to the SQL database for both the Virtual Desktop Agent and Controller.

D. The forward and reverse lookup on the DNS server of the Virtual Desktop Agent and Controller.

Answer: A,D

Question: 48

When starting up a Virtual Desktop Agent, the desktop becomes unresponsive in the BIOS with the

message, 'Connecting to Provisioning services. Please wain...'

What would cause the desktop to delay during the startup process?

A. The target device does NOT have an IP address

B. The Virtual Desktop Agent was incorrectly installed.

Page 16: 1Y0-A19

C. The vDisk chche type is NOT set to 'Cache on server disk'.

D. The Stream Service is stopped on the Provisioning services host.

Answer: D

Question: 49

An administrator is not able to create virtual machine using Machine Creation Services.

What caused this issue?

A. Storage is configured as LVM.

B. There is NOT enough storage for the virtual machines.

C. The Controller CANNOT communicate with the license server.

D. The master image does NOT have the latest version of the Virtual Desktop Agent.

Answer: B

Question: 50

Scenario: A XenDesktop site has two Controllers: Controller A and Controller B. The site is using

Active Directory-based discovery. What would happen to the Virtual Desktop Agent (VDA) if Contrller

A is removed from the site?

A. No connections can be made until Controller A comes back online.

B. The VDA will re-query Active Directory and register with Controller B.

C. All VDAs registered to Controller A must be restarted to discover Controller B.

D. Any users logged on to the VDA that is registered with Controller A will be disconnected.

Answer: B

Question: 51

Scenario: All users in the Sales group must be able to save documents created on their virtual

desktops to USE devices connected to their local desktops. Some users in the Sales group also belong

to the Remote Users group; however, the Remote Users group must not be able to save documents

to a local USB device. An administrator created the Sales USB policy, which allows Client USB device

redirection for the Sales group, and the Remote Users USB policy, which prohibits Client USB device

redirection for the Remote Users group.

Which additional step must the administrator take to meet the needs of this scenario?

A. Set the Remote Users USB policy to 'Disable'.

B. Edit the USB device list on the endpoint device.

C. Ensure that the Sales USB policy has highest priority.

Page 17: 1Y0-A19

D. Add Client USB device redirection rules to the Sales USB policy.

Answer: C

Question: 52

Scenario: Several end users in an environment experienced issues with their desktops. The

administrator investigated the issue and determined that the issue reported was coming from five

specific desktops in a pooled-random desktop group.

What should the administrator do to prevent the users from getting those desktops?

A. Delete the desktops from the catalog.

B. Put the desktops in maintenance mode.

C. Suspend the desktops in the desktop group.

D. Restart the desktops from Desktop Director

Answer: B

Question: 53 DRAG DROP

Scenario: An administrator has created a catalog of 100 desktops and now needs to create several

desktop groups for each of the departments within the company from that catalog. The

administrator was told that each end user in the Engineering department will need access to two

desktops in order to test specific software on one and use the other as a main system.

Which steps must the administrator take to create the desktop group for end users in the

Engineering department?

Place the steps to create the desktop group for the end users in the Engineering department in the

correct order.

A.

1. Select the catalog from which the desktop group will be created

2. Add the Engineering users to the desktop group

Page 18: 1Y0-A19

3. Change the number of desktops for each user to 2

4. Select the help desk administrator who will manage the desktop group

Answer: A

Question: 54

Which three Citrix services need to be running on the Controller to create virtual machines using

Machine Creation Services? (Choose three)

A. Host

B. AD Identity

C. Configuration

D. Machine Identity

E. Machine Creation

Answer: B, D, E

Question: 55

Scenario: A customer needs to configure a XenDesktop environment so that an end user has the best

experience when launching a virtual desktop. The environment needs to be configured with fault

tolerance so that when a XenServer goes down for maintenance the target device can still be

deployed by any XenServer with least load.

Currently, the customer has a XenServer pool consisting of 16 XenServer hosts with 8 GB of memory

and a 2 TB SATA hard disk. A 2 TB Fibre Channel Storage Area Network is attached to the XenServer.

The Provisioning services host is configured on a stand-alone server with 8 GB of memory and three

500 GB iSCSI hard disks configured as a RAID 5 configuration.

What is the best write caching method for deploying 800 target devices within a XenServer pool?

A. Cache on the target device and redirect to the RAM of the target device.

B. Cache on the Provisioning services host and redirect the cache on the local file system.

C. Cache on the target device and redirect the cache on a share within the Fibre Channel storage

repository.

D. Cache on the Provisioning services host and redirect the cache on a share within the Fibre Channel

storage repository.

Answer: C