1.iPASO-EX-Introduction-APR20013-1.pdf
Transcript of 1.iPASO-EX-Introduction-APR20013-1.pdf
-
iPASOLINK-EX(Introduction)
F/W Ver.1.00.20
iPASOLINK-EX Introduction
-
iPASOLINK EX Introduction 1
iPASOLINK EX
Functions, Features and System Performance
-
22
iPASOLINK -EX PACKET RADIO
VLAN Port-based VLAN 802.1Q Tag-based VLAN
QoS 802.1p CoS / ToS /Diffserv/ Advanced QoS (for AMR)
- Synchronous Ethernet - IEEE 1588v2 TC * (option card)- MSTP (IEEE 802.1s)- ERP ITU-T G.8031, 8032V2*- Ethernet OAM, IEE802.1ag, ITU-T Y1731- Link OAM IEEE802.3ah*- Link Aggregation 802.3ad with LACP - Header Compression (L1,L2, L3,L4)** Future
Frequency bands: 70 / 80 GHzRadio Transmission Capacities:QPSK/16/32/64/128*/256QAM* Hitless-AMR LDPC FECtransmission Bandwidth 50* /250 / 500* MHz MTPC / ATPC
Interface :10/100/1000 Base-T1000 Base-SX / LX
Pay as you grow concept- software upgradeFlexible configuration- 1+0, 1+1 HS*,XPIC (1+0)*- Radio Aggregation L1(L2,L3)*
Transmission Specification
Scalability and Flexibility
Advanced Ethernet Functionalities
*with GX
iPASOLINK-EX Introduction
-
iPASOLINK EX Introduction 3
FEATURES-1
CARRIER GRADE PACKET SWITCH FUNCTION
High system gain using LDPC FEC and Linearizer techniques
Over 1 Gbps transmission capacity Adaptive modulation Radio (AMR)
Carrier Ethernet service enabled through built-in GbE L2 switch
PERFORMANCE
All Outdoor Radio Operating at 71 - 86 GHz frequency band
Changeable antenna size without readjustment of pointing Synthesized RF channels for ease of deployment
GbE / FE multiple ports. Support up to 3 ports Support L1/L2/L3/L4 header compression
Effective network planning via GbE full throughput link Rapid and flexible deployment
INTERFACES
Basic interface: 100/1000 Base-T(X) (IEEE 802.3i / IEEE 802.3u)1000 Base-SX/LX SFP (IEEE802.3ab/IEEE 802.3z )(optional)
Capacity and interface functions are selectable by LCT
Higher modulation schemes R1(QPSK to 64 QAM), R1.5(QPSK to 256 QAM)
-
iPASOLINK EX Introduction4
FEATURES-2
SECURITY
Wide input Line voltage range
PoE port available Low power consumption
Highly secured narrow beam-width antenna
MAINTENANCE FACILITIES local and remote supervision on EX via web-based management agent Easy installation for water-proof cable alignment L2 Loopback
SYSTEM FLEXIBILITY Adjustable transmission rate for link distance at the same ODU
User settable Link ID codes Multiple level password control on M-Plane
PROVEN RELIABILTY
Up to 99.999% Carrier-grade reliabilityPlatform
Very compact and light weight platform for easy installation High reliability and quality backed by excellent field proven reliability Low power consumption: energy saving & high Efficient components
0.3 and 0.6 meter antenna
-
iPASOLINK EX Introduction 5
FEATURES-3ADVANCED QoS FUNCTION
Enhanced QoS functions
Class mapping (8 Class queues for QoS control)(802.1p, IPv4 Precedence, IPv4/IPv6 DSCP.)
ETHERNET / VLAN
VLAN table size 2048 group (VLAN 1 ~4094)
Redundancy Function: MSTP (IEEE 802.1s) for redundancy loop prevention
Packet classification functions based on header information
Flexible Scheduling (Deficit-weighted round robin or/and Strict Priority)
Provider Bridges (IEEE 802.1ad)*
Congestion avoidance mechanism (WTD or WRED)
VLAN functions on layer 2 based carrier network
Port based VLAN, tag based VLAN, Tunnel VLAN (IEEE 802.1Q),
Filtering function up to 8,000 MAC learning table
Support Jumbo frame (FE < 2000 , GbE < 9600)
*Future
-
iPASOLINK EX Introduction 6
FEATURES-4
SUPERB OAM FUNCTIONALITIES
Ethernet OAM (IEE802.1ag / ITU-T Y.1731)
NETWORK MANAGEMENT SYSTEM
Supported management systems are (PNMSj, MS5000)Web based local craft terminal for local and remote NE access
SYNCHRONIZATION
High Accuracy clock supply for clock synchronization
PROTECTION SCHEMES
MSTPTiming source protection Priority or QualityHot Standby protection
Fault detection, fault localization/isolation, Fault detection, fault localization/isolation, Performance measurement
IEEE 1588v2 support with additional card ITU-T G.8261 / G. 8262 SyncE clock synchronization
-
780 GHz Security Features
Narrow Beams:
Prevent interception
Resist interference
Superior to lower frequency products
User settable LINK ID codes
Harder to tap than inter-building fiber
Comparing with 6~7 GHz and 70~80GHz
iPASOLINK EX Introduction
-
High Frequency Atmospheric Absorption
Oxygen
Water Vapor
Whats E-band Window of millimeter wave
71-76/81 86GHz
Rain Rates
200mm/h
1mm/h Drizzle
12mm/h Medium Rain25mm/h Heavy Rain50mm/h Downpour100mm/h Tropical150mm/h Monsoon
3mm/h Light Rain
Water vapor
A half wave length= 1.8 mmComparative to raindrop size
Normal rain intensity 10dB /km
E-band (also known as millimetre wave) has a relative low air attenuation, almost equal microwave 38GHz. This typically results in a Gigabit link reach, up to 3 km for carrier-grade availability.
The microwave spectrum for short urban links (26/32/38GHz) is becoming increasingly congested. E-band (70-80GHz) provides a new licensed
spectrum, ready to be used for high capacity links.
iPASOLINK EX Introduction 8
-
Applications
iPASOLINK EX70-80GHz wide-band AOR
1.6/3.2Gbps, ~3km250/500MHz, QPSK-256QAM
Not only capacity but new topologies, traditional tree/branch style to ring/mesh in the aggregation layer.AMR and QoS for the best balance of bandwidth (priority) sharing. Congestion avoidance algorithms such as WTD and WRED Compress techniques and Shaping & policing for capacity Optimization.
iPASOLINK EX Narrow-band [Access/Last-mile]Five times increase in a number of available channels via 50MHz channel spacing, higher spectrum utilisation.
iPASOLINK EX Wide-band [Access/Aggregation]Future proof capacity
Small Cell Backhaul
iPASOLINK AX6-38GHz AOR
BACKHAUL AND LAST MILE ACCESSBACKHAUL AND LAST MILE ACCESSSMALL CELLSSMALL CELLS BACKHAUL AGGREGATIONBACKHAUL AGGREGATION METROMETRO
iPASOLINK SX60GHz AOR
MPLS over WDM
MS5000Network Management System
iPASOLINK EX70-80GHz narrow-band
AOR330Mbps, ~2.5km50MHz, 256QAM
9iPASOLINK EX Introduction
-
Applications
6-38GHz and 70-80GHz suit rooftop and mast
deployments with higher capacities and more robust
network planning and operations
60GHz: Backhaul of Small Cells
6-38GHz/60GHz/70-80GHz: (Macro Cell) Backhaul and Aggregation
60GHz is ideally suited for roof-to-street or street-to-
street deployments with its high-capacity, short-reach, very low-cost transmission
10iPASOLINK EX Introduction
-
iPASOLINK EX : Specifications
Wideband version : modulations and capacity
Modulation QPSK 16QAM 32QAM 64QAM 128QAM 256QAM
Chanel spacing (MHz) 250 500* 250 500* 250 500* 250 500* 250 500 250 500
Capacity (Mbps) 400 800 800 1600 1000 2000 1200 2400 1400 2800 1600 3200
App. link distance (m) 3300 2600 2600 2300 2300 2100 2100 1900 1900 1600 1600 1300
Narrowband version : modulations and capacity
Modulation QPSK 16QAM 32QAM 64QAM 128QAM 256QAM
Chanel spacing (MHz) 50 50 50 50 50 50
Capacity (Mbps) 82 165 207 247 290 330
App. link distance (m) 3800 3300 3200 3000 2800 2500
Features
Frequency band 71-76GHz , 81-86GHz (FDD)Adaptive modulation Supported R1(QPSK-64QAM), R1.5 (QPSK-256QAM)
Configuration 1+0 (1+1 / 2+0 / XPIC in wideband rel. 2.0)
Synchronization Sync Ethernet with ESMC
VLAN 1:1 Carrier Class LACP (802.1AX) 802.1Q/802.1ad, L2CP tunnelling
OAM 802.1ag, Y.1731, 802.3ah
QoS / CoS Policing, hierarchical shaping, WREDCoS/DSCP/VLAN based prioritization
Features
Dimensions 270 x 270 x 100 mm (< 7.3L)
Weight 4.5kg (excluding antenna)
Ports / interfaces 1x 1000Base-T GbE + PoE3x 1000Base T or SX/LX GbE
Power input PoE (IEEE802.3at) , -48VDC
Power consumption 50W (maximum)
Temperature -33 to +50C
Humidity & ingress protection
100% all-weather / IEC 60529 IP66
11iPASOLINK EX Introduction
-
iPASOLINK EX Introduction 12
iPASOLINK EX Features
70/80 GHz AMR
10/100/1000Base-T
QPSK 256 QAM Hitless AMR (1+0) (1+1)
Ether OAM
XPIC
MSTPSYNC ETHERVLAN
GbE(SFP)
RADIO AGGREGATION*
POE
TRP-80G1000MB-1A
-
iPASOLINK EX Introduction 13
iPASOLINK EX Ports
DC -48V
Frame Ground
RX LEVEL MONITOR
Port 4
DCNPort2 or 3
Port1 (POE)
Ports & Terminals
Indication Description
FG Terminal for Frame Ground
RX LEV MON Terminal for Monitoring receive AGC
DCN Terminal for WebLCT or NMS connection
P4 Terminal for GbE (LC)
P2/P3 P2/ Port for GbE (RJ45)P3 / Port for GbE (optical) LC
P1 (POE) Port for GbE / POE (RJ-45)
DC -48V Terminal for Power supply
-
iPASOLINK EX Introduction 14
iPASOLINK EX Ports
DC -48V Port 4 DCNPort2 or 3Port1 (POE)
Power Port Port 1(POE) Port 2 or 3 Port 4 DCN
RJ-45 RJ-45 LC LC RJ-45
Port2 (Electrical)
Port 3(Optical)
Optical FE
1 Ground 1 DA+ 1 DA+ TX 1 TX 1 TD+
2 - 2 DA- 2 DA- RX 2 RX 2 TD-
3 - 3 DB+ 3 DB+ 3 RD+
4 - 4 DC+ 4 DC+ 4 -
5 -48V 5 DC- 5 DC- 5 -
6 - 6 DB- 6 DB- 6 RD-
7 - 7 DD+ 7 DD+ 7 -
8 - 8 DD- 8 DD- 8 -
-
iPASOLINK Introduction 15
iPASOLINK EX - Interfaces
LAN Interface (Electrical) Port 1,2
Input / Output signal 100Base-T(X) or 1000 BASE-TSpeed & Duplex 100 Base-T(X) Auto or FixedConnector RJ-45PoE Voltage (Port1) 42.5V to 57 VVLAN Port-based VLAN,Tag-based VLAN
Tunnel VLAN, IEEE802.1ad
QoS 802.1p CoS, DiffservQoS Control DWRR or SP+DWRR (8 Classes)Bandwidth Management Port and class shaperProtection MSTP
Port 1 is with Power over Ethernet support
Gigabit Ether Interface (Optical) 3,4
Input / Output signal 1000 BASE-SX / 1000 BASE - LXConnector SFP Optical Interface (LC)SFP optical S-1.1/L1.1VLAN Port-based VLAN,Tag-based VLAN
Tunnel VLAN, IEEE802.1ad QoS 802.1p CoS, DiffservQoS Control DWRR or SP+DWRR (8 Classes)
Bandwidth Management Port and class shaper
Protection MSTP
DC -48V Port 4 DCNPort2 or 3Port1 (POE)
DCN Port ( LCT or NMS)
Input / Output signal 10/100 Base-TXConnector RJ-45Default LCT
-
iPASOLINK EX Introduction 16
iPASOLINK EX Features
Rotate the AOR until the mark H is up for Horizontal Polarization and
mount to the Antenna
Rotate the AOR until the mark V is up for Vertical Polarization
and mount to the Antenna
Connect the ground cable here
-
iPASOLINK EX Introduction 17
iPASOLINK EX RX LEV MON
Connect a Digital Voltmeter to the RX LEV MON jack
-
iPASOLINK EX Introduction 18
iPASOLINK EX Connectors
-48V connector receptacle
RSL Monitor
-
RF CKT
TX RF OUT
RX RF IN
TX IF IN
RX IF OUT
MODEM L2 SWITCH
MOD OUT
BB IN
DEM IN BB OUT
DATA OUT
PORT 1
DATA IN
PORT 2
PORT 3
LCT/NMS
CTRL CPU
XPIC CTRL
RTA
XPIF
PS
PoE
iPASOLINK EX Introduction 19
iPASOLINK EX Block Diagram
-48V
-
iPASOLINK EX Introduction 20
PERFORMANCE iPASOLINK EXITEM
Transmission Capacity
and Channel spacing
Channel Spacing 250 MHZ 500 MHz
QPSK 400 488 3300 800 2600
16 QAM 800 999 2600 1600 2300
32 QAM 1000 1250 2300 2000 2100
64 QAM 1200 1502 2100 2400 1900
128 QAM 1400 1751 1900 2800 1600
256 QAM 1600 2001 1600 3200 1300
Radio capacity 64 Byte pkt Hop distance(m) Radio capacity 64 Byte pkt Hop distance(m)
Ether Functions
Switching Capacity 40 Gbps (non-blocking)
MAC Learning Table Independent VLAN learning (VLAN+ MAC) up to 8k (configurable)
VLAN802.1q port based, Tag Based , Tunnel(802.1ad Provider Bridge)L2CP Tunnel Function
Jumbo Frame Support (up to 9600 byte)
QoS Ingress QoS Class Classification: VLAN CoS/IPv4 DSCP/ IPv6 DSCP
Egress 8 Class SP/DWRR queues
Per class rate configurable shaping
Per class configurable maximum burst length
Shaping for strict priority queue
Hierarchical shaping (port and class)
Weighted tail drop
ETH OAM 802.1ag service OAM (CC/LB/LT), ITU-T Y1731
Protection MSTP
SynchronizationSYNC-ETH G.8261, Ethernet synchronization message channel (ESMC)
IEEE 1588v2 PTP ( optional card)
Other Header compression
-
iPASOLINK EX Introduction 21
PERFORMANCE iPASOLINK EXITEM IDU
DCN AND SERVICE CHANNELS
Radio Configuration (1+0), (1+1), (2+0), XPIC
DCN /LCT / (NMS) Interface 1 port , 10/100 BASE-TX (RJ-45)
SNMPv1/v2c/v3 http / https, ftp / sftp
DHCP server support (LCT port mode)
In band interface SNMPv1/v2c/v3 http / https, ftp / sftp
Modem TX output control Manual control. Automatic control (ATPC), mute control
Performance Monitoring (PMON) metering
PMON Items: OFS, BBE, ES, SES, SEP, UAS, RX LEV
Metering Items: Output Power Level (TX PWR), Received Signal Level (RSL). Bit Error Rate (BER)
LAN Monitoring items: RX Unicast, RX Broadcast, RX Multicast, RX Pause, RX CRC error
POWER REQUIREMENTS AND DIMENSION
Power requirement -48 V DC (-40.5 to -57 VDC) conform to EN300 132-2
POE: (42.5V to 57 V)
Power Consumption 50 watts (typical)
Mechanical Dimensions 285 x 285 x 92 mm
Weight . Approx: 6 Kg without antenna & mount bracket, Antenna & mount: 0.3m dia (7kg), 0.6m dia (10 kg)
Environmental Condition Workable: -10 to +55 Deg. C,
-
iPASOLINK EX Introduction 22
PERFORMANCE-EX
ITEM GuaranteedQPSK QPSK 16QAM 32QAM 64QAM 128QAM 256QAM
Output Power (dBm) +18 +13 +12 +11 +10 +9 +/- 3.0 dBATPC Range Range Down to 5 dBmGuaranteed dB +2/- 3.0 +/- 2.0 dB +/- 2.0 dB +/- 2.0 dB
Minimum Step 1 dBFrequency stability + / - 6 pmm +/- 10 ppm
RX ThresholdBER 10-6 (dBm measured at
antenna port
-68 -62 -59 -56 -52 -48 + 3.0 dB
BER 10-3 -1.5 dBSystem Gain
BER 10-6 (dBm measured at antenna port
86 75 71 67 62 57 - 5.0 dB
BER 10-3 + 1.5 dBMaximum input level -20 dBm For The BER less Than 10-3
Residual BER Less than 10-12 at RSL of -30 to (threshold level 10-6 BER) + 5 ) dBm
MAX RSL Without damage -10 dB
-
iPASOLINK EX Antenna variation
1. Direct mount antenna Pole mounting bracket with antenna
alignment Antenna dish with feeder horn
2. Antenna type and Size variation1. Parabolic antenna
Single polarized antenna (0.2m) 0.3m, 0.6mDual polarized antenna with OMT 0.3m, 0.6mSingle polarized antenna size and gain (TBD)
3. Coupler for 1+1 or 2+0 Balance coupler (3dB) Unbalance coupler (10dB-1dB)
iPASOLINK EX Introduction 23
-
Configuration description for 1+0
Antenna Dish
MountingBracket Mounting
Bracket
RadioBlock Radio
Block
Azimuthadjusting Elevation
adjusting
4x fixing bolts
iPASOLINK EX Introduction 24
-
Configuration description for 1+1 or 2+0
2xRadio
Balance hybrid combiner or Unbalance coupler
1+1 control ConnectionP1 to P1(Except 2+0)
User interface
iPASOLINK EX Introduction 25
-
2xRadio
OMT XPICControlConnection
User interface
Configuration description for XPIC
iPASOLINK EX Introduction 26
X-IF
-
iPASOLINK 100iPASOLINK 200iPASOLINK 400
iPASOLINK 1000
PASOLINKPASOLINK+
NEO/cNEO
NEO HP3000/5000S
PNMSj MS5000
OtherTransportSystems
or
iPASOLINK SX
ePASOLINKiPASOLINK AX
iPASOLINK EX
iPASOLINK EX is managed via NECs unified NMS platform. Alarm monitoring
Collection of performance data Remote maintenance access
Network Management System
iPASOLINK EX Introduction 27
-
28
Thank you
This training document describes the current version of the equipment.The specifications or configuration contained in this document are subject to change without notice.