1EH-12G Miniature Surface Mount - Sanyu USA · 2016. 9. 20. · @ n om i alc v t g 0 Hz squ ar ew v...
6
SPECIFICATIONS 1EH-12G PRODUCT DESCRIPTIONS The 1EH-12G series was specially developed as a low cost alternative to memory inspection systems. In order to effectively reduce costs, the number of leads on each ground was reduced. With proven tracks of reliability, cost performance and manufacturing capacity, we have been providing this series to the major memory inspection system companies. Axial, J-Lead also available Miniature Surface Mount 1EH-12G 1EH-12G Parameters Units 1 Form A Test Conditions Coil Specifications Nominal Coil Voltage Coil Resistance Operate Voltage Release Voltage VDC Ω VDC Max VDC Min 5.0 150 3.75 0.7 ±10% @ 20˚C Contact Ratings Switching Voltage Switching Current Carry Current Contact Rating Life Expectancy Contact Resistance Contact Resistance Stability Volts Amps Amps Watts x10 6 Cycle mΩ mΩ 100 0.5 1.0 10 300 150 5.0 Max DC/Peak AC resistance Max DC/Peak AC resistance Max DC/Peak AC resistance(@30˚C) Max DC/Peak AC resistance @ 1V 10mA Max initial @ operate voltage Max initial @ operate voltage Relay Specifications Insulation Resistance Dielectric Strength(Static) Operate Time (Including Bounce) Release Time Ω Min VDC Min VDC Min VDC Min msec Max msec Max 10 11 200 250 250 0.3 0.05 Between all isolated pins @ 100V 20˚C 65%RH Between contacts Contacts to shield Contacts/Shield to coil @ nominal coil voltage 100 Hz square wave Diode suppression Measurement Reference Conditions Environmental Ratings Temp: 15˚C to 35˚C Humidity: 25% to 75%RH Atmospheric Pressure: 860 to 1060hpa Storage temp: -40˚C to +85˚C Operate temp: -20˚C to +80˚C Vibration: 20G’s to 2000Hz Shock: 50G’s Processing temp: 260˚C max for 60sec. dwell time @ 20˚C @ 20˚C
Transcript of 1EH-12G Miniature Surface Mount - Sanyu USA · 2016. 9. 20. · @ n om i alc v t g 0 Hz squ ar ew v...
SPECIFICATIONS
1EH-12G
PRODUCT DESCRIPTIONS
The 1EH-12G series was specially developed as a low cost alternative to memory inspection systems. In order to effectively reduce costs, the number of leads on each ground was reduced.
With proven tracks of reliability, cost performance and manufacturing capacity, we have been providing this series to the major memory inspection system companies.
Axial, J-Lead also available
Miniature Surface Mount
1EH-12G 1EH-12G
Parameters Units 1 Form A Test Conditions Coil Specifications Nominal Coil Voltage Coil Resistance Operate Voltage Release Voltage
VDC Ω
VDC Max VDC Min
5.0 150 3.75 0.7
±10% @ 20˚C
Contact Ratings Switching Voltage Switching Current Carry Current Contact Rating Life Expectancy Contact Resistance Contact Resistance Stability
Volts Amps Amps Watts
x106 Cycle mΩ mΩ
100 0.5 1.0 10 300 150 5.0
Max DC/Peak AC resistance Max DC/Peak AC resistance Max DC/Peak AC resistance(@30˚C) Max DC/Peak AC resistance @ 1V 10mA Max initial @ operate voltage Max initial @ operate voltage
Relay Specifications
Insulation Resistance
Dielectric Strength(Static)
Operate Time (Including Bounce) Release Time
Ω Min
VDC Min VDC Min VDC Min
msec Max
msec Max
1011
200 250 250
0.3
0.05
Between all isolated pins @ 100V 20˚C 65%RH Between contacts Contacts to shield Contacts/Shield to coil @ nominal coil voltage 100 Hz square wave Diode suppression
Measurement Reference Conditions Environmental Ratings Temp: 15˚C to 35˚C Humidity: 25% to 75%RH Atmospheric Pressure: 860 to 1060hpa
Storage temp: -40˚C to +85˚C Operate temp: -20˚C to +80˚C Vibration: 20G’s to 2000Hz Shock: 50G’s Processing temp: 260˚C max for 60sec. dwell time
@ 20˚C @ 20˚C
1EH-12G
(9.9) (4.67)0.39 MAX 0.184 MAX
1 6
2 5
43
0.5 +0.012-0.012
+0.012-0.012
+0.012-0.012
2-0.05 +0.004-0.004
0.020.0510.051(1.3) (1.3) (0.5)
(12.7) (2-1.27)
0.104 0.335(2.65) (8.5)
0.104(2.65)
2-0.05
) 72. 1- 2(
871.0)25.4(
MAX
620.0)56.0(
10
100
1000
10000
1 10 100 1000
(×106)
Contact Resistance
Contact Resistance vs. Cycle
)smho-
m( ecnatsi seR tcat noC
Operations
0%
25%
50%
75%
100%
Contact Resistance Distribution
0.1
1
10
100
1 10 100 1000
Carry Current Capacity
)A( tnerru
C tcatnoC
Duty Cycle [Ton/(Ton+Toff)x100]%
-7
-6
-5
-4
-3
-2
-1
0
1
2
10 100 1000 10000
99.9
99
95908070605040
30
2015
10
7
543
2
1
0.70.50.40.3
0.2
0.1
1.5
0.15
Weibull Chart
)%()t(F
)))t(F-1(/1(nlnl
0
20
40
60
80
100
0 100 200 300 400
)C eerged( esi r er ut ar epmet li oC
Applied power (mW)
0
20
40
60
80
100
0 5 10 15 20 25 30
Cycle (x106 )
Applied time (minute)
PERFORMANCE DATA
Carry Current
Coil Temperature Rise
)%( noit ubi rtsi
D
Life)
C eer ged( esi r er ut ar epmet li o
C
Ta=30°C
LOAD 1V, 10mA
Applied power 275mW
Applied power 150mW
Applied power 60mW
Notes: Reference data of 1EH-12G
50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200
Contact Resistance (mΩ)
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
-60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
Operate and Release voltage vs. ambient temperature
Operate and Release Voltage
Ambient temperature (degree C)
)%( egatlov lioc lani
mon fo oitar A
0
1
2
3
4
5
1 10 100 1000
OpeV/RelV vs. Cycle
Operations (x106 )
)V( egatl oV et ar ep
O)
V( egatl oV esael eR
0%
25%
50%
75%
100%
0 1 2 3 4 5
Operate Voltage / Release Voltage
Voltage
)%( noitubirtsi
D
-40
-30
-20
-10
0
10
20
30
40
Ⅰ Ⅱ Ⅲ Ⅳ Ⅴ Ⅵ
Alternation of operate voltage
Mounting layout
)%( noitanretla fo oitar
A
-40
-30
-20
-10
0
10
20
30
40
Ⅰ Ⅱ Ⅲ Ⅳ Ⅴ Ⅵ
Alternation of release voltage
Mounting layout
)%( noitanretla fo oitar
A
Ⅰ Ⅱ Ⅲ Ⅳ Ⅴ Ⅵ
ON
ON OFF
OFF
ON ON OFF OFF
ON
ON
ON
OFF
OFF
OFF
L1 L1
L2L2
Device under test
Magnetic Interference
L1: 4.7mm
L2: 13.0mm
Operate Voltage(maximum)
Operate Voltage(typical)
Release Voltage(typical)Release Voltage(minimum)
Operate Voltage
Release Voltage
Ope.V
Rel.V
Notes: Reference data of 1EH-12G
S-Parameters
Insertion Loss Return Loss
F [GHz]
dB
F [GHz]
dB
dB
F [GHz]
Isolation V.S.W.R.
F [GHz]
Through Fixture 1EH-12G with Fixture
Eye Diagram
dB
Through Fixture
Notes: Reference data of 1EH-12G
Rise Time: 250ps, Bit Rate: 800Mb/s PRBS ( Pseudo Random Bit Sequence ):2^10-1
Rise Time: 250ps , Bit Rate: 800Mb/sPRBS ( Pseudo Random Bit Sequence ):2^10-1
Rise Time: 250ps, Bit Rate: 1 6 Gb/sPRBS ( Pseudo Random Bit Sequence ):2^10-1
Rise Time: 250ps, Bit Rate: 1.6Gb/s PRBS ( Pseudo Random Bit Sequence ):2^10-1
0.00
-2.00
-4.00
-6.00
-8.00
-10.000.00 1.00 2.00 3.00 4.00 5.00 6.00 0.00 1.00 2.00 3.00 4.00 5.00 6.00
0.00 1.00 2.00 3.00 4.00 5.00 6.000.00 1.00 2.00 3.00 4.00 5.00 6.00
0.00
-10.00
-20.00
-30.00
-40.00
-50.00
0.00
-10.00
-20.00
-30.00
-40.00
-50.00
0.00
5.00
10.00
15.00
20.00
1EH-12G with Fixture
Dimensions of Tape and Reel All Dimensions are inches(mm)
Packing Quantity: 1,000pcs
Packing conforms to EIA standard EIA-481-2 or EIA-481-3
Feed Direction
(25.4)(3.0)
Round sprocket holesA
3-120°
0.118 1.0+0.039- 0.039
51.3)0. 08(
299. 21) 0. 033(
0.197(5.0)
+0.004- 0.004
Ø0.059
(Ø1.5)0.157
(4.0)
+0.004- 0.004
0.472(12.0)
+0.004- 0.004
0.079(2.0)
+0.004- 0.004
0.201(5.1)
+0.012- 0.012
0.02(0.5)
0.069
(1.75)
354. 0) 5. 11(
0.945
(24.0) 425. 0 (13
.3)
210.0+210.0 -
+0.07
9 970.0 -
20.0+20.0 -
+0.00
4- 0
.004
+0.00
4- 0
.004
Details of the part A
0.079(2.0)
+0.02- 0.02
0.827 Ø
0.512(Ø13.0)
Ø+0.008- 0.008
+0.031
- 0.031
(Ø21.0)
3-R0.039
(3-R1.0)
+0.004
- 0
