19 8 3 – 20 3 - Coptool 8 3 – 20 3 Krylon Quik-Mark ... range of professional industries as well...

www.ohiopowertool.com 1

Michigan Ladders - See page 5

Grand Opening! 999 Goodale Blvd.Columbus, OH 43212

New Store

Duct Tape, Electrical Tape, Blue Painters Tape, See 8

1983 – 2013

Krylon Quik-Mark Inverted Marking Paint

High solids formulation gives them the boldest, •brightest, and most visible markings in the industryPenetrates and adheres to hot surfaces •Spray-Thru cap and non-clogging spray tip•VOC Compliant, free of lead hazards•White S03901•Pink S03612•Blue S03620•Green S03630•Orange S03700•

ICS Gas Powered 14” Concrete Chain Saw with TwinMax Chain

Part #: 544107•6.4 HP, 2-stroke, single cylinder, air cooled engine•Deep, straight cuts and •square corners with ease of use and dependable performance to match

Ingersoll Rand 13 H P Two-Stage Honda Gas Engine Compressor w/ Alternator

Part #: 45466067•30 Gallon Horizontal Tank, 175 PSI, 13 HP, 25 •ACFMFeaturing truck-bed mounting, •the F-Series includes electronic ignition, idle engine control, a 30-gallon ASME receiver, an OSHA approved, fully enclosed belt guard and a weather-resistant powder-coat paint finish

$2781.84

$2.49/can

On Sale For:

$1,995.04

Visit out online catalog! Find thousands

of products and pricing!www.ohiopowertool.com

October 2013

Tel: 800-242-4424999 Goodale Blvd.

Columbus, OH 43212www.ohiopowertool.com2 www.ohiopowertool.com

PROFESSIONAL TOOLS & EQUIPMENT SINCE 1983.

Ohio Power Tool provides tools, supplies, repair service and rentals to a wide range of professional industries as well as serious DIY users. Started in 1983 our company has grown steadily over the years because of the knowledgeable staff and high level of customer service. We are a factory authorized Service Center for most major brands of air, electric and hydraulic equipment. On the web, over the phone or in our newly remodeled showroom let our highly knowledgeable staff help you find the right tool for the job!

GRAND OPENINGOhio Power Tool has recently moved to a new building located at 999 Goodale Blvd. We are less than two miles from our former location on Dublin Road, but our considerably larger new space will allow us to keep more of the items you are looking for in-stock while providing the same continued level of customer service that you have come to expect. Be sure to stop in and check out our new showroom, and try to make it to our Grand Opening event on Thursday, September 26th. We will have manufacturer representatives on-site to answer your questions as well as BBQ lunch and fantastic sales!

AUTHORIZED FACTORY SERVICE CENTEROhio Power Tool is also a licensed factory service and warranty center for nearly every brand that they carry. If you are more of the type that likes to fix your own tools, we are also more than happy to help you get parts, and keep lots of OEM parts in stock. If you have a broken tool that is part of any of the brands listed below give us a call or bring it by our store to see if we can’t get it up and running for you. Our repair department has an incredible amount of experience servicing, testing, repairing, and rebuilding you air, electric, and hydraulic tools. If you have one that is not pulling its weight, bring it to Ohio Power Tool.

TOOL AND EQUPMENT RENTALSOhio Power Tool also has a growing rental fleet that specializes in sewer locating equipment, hydraulic and air equipment, and portable magnetic drill presses. We have rates for daily, weekly, and monthly rentals. Our experienced staff would be happy to assist you with your next project! Call Monday-Friday, 8 AM to 5 PM or send us an e-mail at [email protected].


Columbus, OH 43212www.ohiopowertool.comwww.ohiopowertool.com 3

Powermatic PM1500 15” Bandsaw 1791500

Part #: 1791500•Perfect for shops that cannot •justify the cost of a full size 18” bandsaw but still need maximum performance14 ½” throat and 14” of resaw •provide more capacity than a traditional 14” bandsaw Powerful 3HP, 230V motor•

Jet Bench GrindersTotally enclosed pre-lubricated •ball bearingsRubber mounts prevent •movementHeavy-duty guarded toggle •switchIncludes •spark guards, eye shields, and coarse vitrified grinding wheels

6” $169 Part #: 577101•8” $239 Part #: 577102•10” $459 Part #: 577103 •

Metal WorkingJet JDP-20MF 20” Drill Press

Part #: 719200•12 Spindle Speeds•1” Drill Capacity•Rotating, 45° •tilting, crank operated worktable with quick release clamp

Jet HVBS-7MW 7” x 12” Horizontal/Vertical Bandsaw

Part #: 414459•Cast iron bow and bed•Hydraulic down feed for ease of •cut¾ HP, 115/230V, 1 Phase motor, •prewired 115V

Jet JWL-1221VS Midi-Lathe Part #: 719200•New model replacing and improving on JWL-•1220Variable speed for 60-3600 •RPM1 HP 115V motor•

Powermatic PM1000 Table SawPart #: 179100K•Cabinet saw that only requires 115V power•Convenient, hands-free power switch•1-3/4 HP electric motor•

Jet DC-1100VX-CK Dust CollectorPart # 708659K•Vortex cone technology prevents filter clogging•Quick install collection bag•Permanently lubricated motors •rated for continuous duty115/230V motor, prewired for 115V•

Stationary Machines

Wood Working

$999.00

$1299.00

$2099.91

$2899.99

$799

$699



Falltech Internal 6’ Shock Absorbing Lanyard

Part #: 8259•Double locking snap hooks•1-1/4” tubular polyester •webbing for resistance to UV light and abrasionTensile strength of 6,000 lbs.•

Edge Eyewear Safety Glasses Combines the utility of safety glasses with the style •of designer sunglassesHigh velocity impact resistant - .25” steel ball at •150 ft/sHigh mass impact resistant – 17.6 oz. projectile •from 50” drop

Reclus Smoke Safety Glasses

Smoke Lens provides the •perfect tint for standard shading in normal light conditionsPart # SR116•

Brazeau Polarized Skull Safety Glasses

Special filtering layer blocks •out reflected light from below and glare from abovePart #: TXB216-S•

Falltech 3-D Full Body Contractor Harness

Part #: 7018•Contractor-grade full body harness •with back and side D-rings for fall arrestSizes Available: Universal fit, XL, XXL, •XXXL (Upcharge for extended charges may apply)

Falltech 3-D Full Body Flowtech Harness

Part #: 7089•Patented FLOWSCAPE technology •featured on the back/shoulder yoke and D-ring assemble and on the Belt Bridge waist pad allows the harness to remain raised off the bodyAbrasion resistant Lycra lining •against the bodyLightweight molded EVA foam construction on all •padding components increases air circulationSizes Available: S, M, L XL•

Falltech Roofer’s Kit 8593A Part #: 8593A•Contains harness, vertical •lifeline, shock absorbing lanyard, hinged reusable roof anchor

Dustless Technologies Grinder Vacuum Dust Guards

Captures up to 99% of dust created by a hand •grinderRemovable front lip for grinding against walls•Meets EPA guidelines for lead paint removal in •renovation projectsFits Most Grinders With •ease5” Part # D1835•7” Part #: D1850•

ERB Economy Eye Protection Part #: 17940•99% UV Protection•Clear plastic wrap around•

Safety

$12.95

$29.95

$1.29

$52

$239

$29.97

$112.80

$90



ERB Omega 6 Point Ratchet Hard HatsMolded high density polyethylene for maximum protection•Secure-Fit ratchet features easy turn knob•Fits 6-1/2” – 8” head sizes•Green, Part #: 19958,: Orange, Part #: 19953: Red, Part #: 19954: White, Part #: 19951•Yellow, Part #: 19952: Blue, Part #: 19956•

Milwaukee Heated HoodiesGrey - Part #:2372•Khaki - Part #2375•Red - Part #:2370•Up to 6 hours of continuous •heat per battery chargeWater and wind resistant•

Milwaukee Heated JacketsBlack - Part #:2344, Red - Part #2340, •High Visibility - Part #:2346

Michigan Extra Heavy Duty Fiberglass Step Ladders

Heavy duty Structural Molded Top•Heavy duty inside spreaders to protect against •damage3 “U” Channel Serrated Aluminum Steps•Double Angle Bracing on Bottom Step•

6’, Part # 371706, • $77

8’, Part #: 371708, • $99

10’, Part # 371710,• $166

Michigan Extra Heavy Duty Fiberglass Extension Ladders

Direct “D” rung crimping to the rail•Interlocking side rails•Gravity spring-assisted rung locks•Self-aligning shoe with slip resistant tread and steel •ice pick endReinforced with rigid steel supports•

20’, Part # 386120, • $179

24’, Part #: 386124, • $209

$149.62

Realtree Camo - Part #:2342 •(Realtree Camo is $169.84, Upcharge for extended sizes)

$169.84

$99

$9.62



Bosch 18V CORE Brushless Cordless Oscillating Multi-Tool with L-Boxx

Part #: MXH180BL•First cordless oscillating tool with brushless •technologyUp to 30% more power with better •efficiency for increased runtime and exceptional motor lifeIncludes L-Boxx 2 storage case•

Bosch 12V Combo Kit with Drill/Driver, Impact Driver, Radio and L-Boxx Cases

Part #: CLPK33-120LP•The PS31 12-Volt Drill/Driver has 265-Inch-per-•pound of torque and up to 1,300 RPMThe PS41 12-Volt Impact •Driver has 930-Inch-per-pound of torque and up to 2,600 RPMAlso Includes (2) 12V •Batteries, a charger, the PB120 12V radio, an L-Boxx 1, and an L-Boxx 1-A w/ organizer trays

Bosch 18V Cordless Jigsaw with L-Boxx

Part #: JSH180BL•30% lighter and 10% smaller •than leading competitor1 Handed blade insertion and •ejectionIncludes L-Boxx 2 case•

Bosch Compact 18V RadioPart #: PB180•Compact – fits inside half on an •L-Boxx 2 storage caseAC/DC power compatibility •– Powered by AC adapter (included) or Bosch 18V Li-Ion batteries and chargers (not included, sold separately)

Bosch 2-Tool Combo Kit with Compact Tough Drill/Driver and Impact Driver

Part #: CLPK234-181L•Compact Tough drill/driver delivers better balance and •control of the tool – perfect for working in tight areasCompact Tough Hex Impact Driver provides optimized •torque control which limits stripping of screws and helps prevent screw heads from shearingIncludes: DDS181 Compact •Tough Drill Driver, IDS181 Compact Tough Impact Driver, (2) L-Boxx 2, (2) Slimpack HC BAT610G 18V Batteries, Charger

Bosch 18V Cordless Bandsaw with L-Boxx

Part #: BSH180BL•2 ½” x 2 ½” cutting capacity•Uses 28.75” x .5” bandsaw blades•Includes L-Boxx 3 case•

Bosch 4.0Ah Starter KitPart #: SKC181-01•Includes 1 18V 4.0 Ah “Cool-•Pack” Battery and Charger

Bosch 12” Dual-Bevel Axial Glide Miter Saw

Part #: GCM12SD•Axial-Glide System •provides durable and consistent precision over the entire life of the tool6 ½” vertical cutting •capacity against the fence

Bosch Colt Variable Speed Palm Router with Plunge Base

Part #: PR20EVSPK•1 HP Variable Speed Router•One of the most popular rout-•ers on the marketPlunge base increases router •versatility

Bosch 6.5 Amp Top Handle JigsawPart #: JS365•Variable speed – Dial •sets maximum speed and accelerator trigger controls operating speedTool-less blade change system•

Power Tools

$239

$199

$189



Nothing but HEAVY DUTY.

$399.00W/TRADE-IN $299.00

$299.00W/TRADE-IN $199.00

$399.00W/TRADE-IN $299.00

$299.00W/TRADE-IN $199.00

$329.00W/TRADE-IN $229.00

M18 FUEL™ LITHIUM-ION 2-Tool Combo Kit 2797-22

M18™ Cordless Lithium-Ion 7/8” SDS-Plus Rotary Hammer Kit 2605-22

M18™ Cordless LITHIUM-ION Band Saw Kit 2629-22

HACKZALL® M18™ Cordless LITHIUM-ION One-Handed Recip Saw Kit 2625-21

M18 FUEL™ 1/2” Hammer Drill/Driver Kit 2604-22 or 2653-22 M18 FUEL™ 1/2” Hammer

Drill/Driver (2604-20)

M18 FUEL™ 1/4” Hex Impact Driver (2653-20)

M18™ XC High Capacity REDLITHIUM™ Battery (48-11-1828)

M18™ & M12™ Multi-Voltage Charger (48-59-1812)

M18™ Cordless Lithium-Ion ½” Hammer Drill/Driver (2602-20)

Sawzall® M18™ Cordless LITHIUM-ION Recip Saw (2620-20)

M18™ Cordless LITHIUM-ION Band Saw (2629-20)


HACKZALL® M18™ Cordless LITHIUM-ION One-Handed Recip Saw (2625-20)


M18 FUEL™ 1/2” Hammer Drill/Driver

M18™ REDLITHIUM™ XC 4.0 Extended Capacity Battery Pack

M18 FUEL™ 3/8” Impact Wrench w/ Friction Ring

M18™ REDLITHIUM™ XC 4.0 Extended Capacity Battery Pack

M18TM MILWAUKEE TRADE-IN PROMOTION

ALL PRICES GOOD WHILE CURRENT QUANTITIES LAST

TRADE IN ANY DEAD OR ALIVE 14.4 PROFESSIONAL GRADE TOOL AND (2) CORDLESS BATTERIES—RECEIVE $100 DISCOUNT OFF OF SELECT M18TM XC KITS. (TRADE-IN BRANDS INCLUDE BUT ARE NOT LIMITED TO: HILTI, BOSCH, DEWALT, HITACHI, PORTER CABLE, MILWAUKEE, PANASONIC AND MAKITA.

AVAILABLE FOR PRE-ORDERS—Products available 10/15.

M18 FUEL™ 3/8” Impact Wrench Kit w/ Friction Ring 2654-22 or 2655-22

2730-21

2780-21

2781-212720-22

2780-22

2730-22

2781-222720-21

$449.00W/TRADE-IN $349.00

$399.00W/TRADE-IN $299.00

$399.00W/TRADE-IN $299.00

$199.00W/TRADE-IN $99.00

M18™ Cordless LITHIUM-ION 4-Tool Combo Kit 2696-24

1983 – 2013

Check Out Our New Location

Phone: 800-242-4424

SEPTEMBER 2013



CS Unitec 2” Reversible Variable Speed Magnetic Drill Press

Part #: MAB 485•Reversible motor for drilling •applications in holes up to 2” in diameterTapping capacity – 3/16” – 15/16”•¾” Weldon Shank•

Bosch 9” High Performance Right Angle Grinder w/ Lock

Part #: 1994-6•4 HP motor•Durable and reliable•AC/DC compatibility to •work with generators and welders

Metal WorkingHougen HMD150 Low-Profile Magnetic Drill

Part #: HMD150•Gets into tight spots •with 7-13/16” heightUses Hougen Rotaloc •annular cutters

Hougen HMD904 Magnetic Drill Press with FREE Coolant System

Part #: HMD904•1 ½” diameter, 2” deep drilling •capacityCan be modified to use twist drill •bits with optional accessoriesUses Hougen Rotabroach annular •cutters

CS Unitec 5” Reversible Variable Speed Magnetic Drill Press

Part #: MAB 1300•Can drill 5” diameter holes up to •2” deep – and 4 ¾” holes up to 4” deep20 Amp motor also taps, reams, •and countersinks

Ohio Power Tool also stocks lots of Hougen Annular Cut-ters from ¾” to 3” depth of cut and up to 2 3/8” diameter. Larger sizes can be special ordered.

Hougen 1” x 1” Rotabroach Annular Cutter $44.20

Hougen 2” x ¾” Rotabroach Annular Cutter $50.49

$845.75$807.50

$1997.00 $4852.00

Bosch 4 ½” SLIM Angle Grinder

Part #: 1380SLIM•7.5 Amps, 11,000 RPM•Lock-On Side Switch•

$59.40

Bosch 5” Variable Speed Grinder w/ No-Lock Paddle Switch AG50-11VSPD

Part #: AG50-11VSPD•11 Amp 11,500 RPM Motor•Variable speed dial provides the ability •to adjust speed for specific situationsOverload protection •shuts the tool off to reduce overheat and prevent motor damage

$149

$219.98

Hougen 18V Cordless Metal Hole Punch

Part #: 76000•Punches holes in metal up to ¼” thick•Only weighs 16.5 pounds, punches holes •that would typically be done with hand-held twist drillsIncludes 1 battery, charger, and case•

$2248.20



SAIT United Abrasives Type 27 Grinding Wheels 7/8” Bore

4.5”, Part #: 20063,• $1.615”, Part #: 20073, • $2.807”, Part #: 20086, • $5.059”, Part #: 20090, • $5.05

Milwaukee Metal Cutting Saw Blades42 Teeth, Part #; 48-40-4520, • $52.95

50 Teeth, Part #: 48-40-4520, • $59.95

60 Teeth Aluminum, Part #: 48-40-4540, • $45.95

Milwaukee 4 ½” Small Angle Grinder with Lock

Part #: 6147-30•11 Amp, 11,000 RPM motor•Tool free accessory change•Debris baffles protect internal components by •deflecting material out of intake vents

$89

Milwaukee 6” Cut-off Grinder with No-Lock Switch

Part #: 6161-31•13 Amp, 9,000 RPM motor•

$139

Milwaukee Die GrinderPart #: 5196•11 amp, 14,500 RPM•For mounted wheels and •points up to 2”¼” collet•

$279.95

SAIT United Abrasive Type 27 Cut-Off Wheels

4.5”, Part #: 22021, • $2.375”, Part #: 22071, • $2.307”, Part #: 20086, • $2.539”, Part #: 20090, • $2.80

Milwaukee 8” Metal Cutting SawPart #: 6370-21•Dry-cut technology provides faster, cleaner, •more affordable metal cutting2-9/16” cut depth•13 amp motor•Includes metal cutting blade•

$299.82

Markal Valve Action Paint Markers

$29.97 (Box of 12)White – 096820•Yellow – 096821•Red – 096821•Black – 096823•Blue – 096825•

Champion 8 Pc. Titanium Coated Bur Kit

Part #: BK8P•Solid carbide burs feature double •cut flutes for efficient machining of cast iron, steels, titanium, brass, bronze, and copperIncludes the most popular shapes •and sizes

$246



Bosch Brute Turbo Demolition Breaker Deluxe Kit

Part #: BH2770VCD•Total portability – operates on 115V AC•Best in class impact energy – 47 ft-lbs.•Includes Deluxe Hammer Cart, Two Star-Point •Chisels, Two Narrow Chisels

Concrete

CS Unitec Eibenstock 6” Wet/Dry Diamond Core Drill

Part #: END 130/3PO•Ideal for drilling holes in floors, walls, ceilings and •for all concrete anchoring systems15 amp motor for high performance•

Bosch Bulldog XTREME SDS-Plus Rotary Hammer Drill

Part #: 11255VSR•Easily converts between hammer only, •hammer-drill, and drill only modes1” Diameter bit capacity•7.2 amp motor•

Diamond Products M-1 Stand with Milwaukee Motor

Part #: 4245059•Milwaukee 20 amp coring motor with shear pin•Stand with vacuum base•Can use up to 10” diameter core bits (14” with •additional accessories)

$1,950.96$1,779.70

$1,299.00

$199.99



Bosch SDS-Plus Full Head Carbide BitsHCFC2041 - 1/4” x 6” • $3.52

HCFC2044 - 1/4” x 12”• $9.67

HCFC2051 - 5/16” x 6” • $4.89

HCFC2054 - 5/16” x 12” • $9.80

HCFC2061 - 3/8” x 6” • $4.70

HCFC2064 - 3/8” x 12” • $8.65

HCFC2067 - 3/8” x 18” • $14.45

HCFC2081 - 1/2” x 6” • $5.87

HCFC2084 - 1/2” x 12” • $10.60

HCFC2087 - 1/2” x 18” • $16.04

HCFC2102 - 5/8” x 8.5” • $10.75

HCFC2103 - 5/8” x 12” • $17.10

HCFC2104 - 5/8” x 18” • $22.45

HCFC2224 - 3/4” x 10” • $26.15

HCFC2227 - 3/4” x 18” • $32.11

HCFC2244 - 7/8” x 10” • $32.25

HCFC2247 - 7/8” x 18” • $35.92

HCFC2263 - 1” x 10” • $34.88

HCFC2267 - 1” x 18”• $41.72

Chicago Pneumatic 1260 60 LB. Demolition Tool – Breaker

Part #: 8900003029•Alloy steel forgings, excellent •durabilityIntegral Oiler for continuous •lubrication1 1/8” x 6” chuck•

Chicago Pneumatic MV100 AT Asphalt Plate Compactor

Part #: 4812099128•Designed for asphalt with a large •capacity water tank and stainless steel sprinkler systemDouble sealed non-contact •bearings reduce wear

$1997.00$899.95

Diamond Products Star Blue Diamond Blades

12”, Part # 92398, • $64.99

14”, Part #: 85261, • $89.99

Diamond Products CC6566 66HP Walk Behind Saw

Available in one and three-speed models•Powerful Kubota Diesel Engine•Fits through a 36” door frame•

Starting at

$20,436.82



RIDGID CS6 Digital Recording 5.7” LCD Monitor Direct to USB recording for fast, efficient documentation

Water resistant keypad for direct •control of essential camera and monitor functions

Plumbing

RIDGID RP-340B ProPress KitPart #: 43353•Includes 2 18V Batteries, •Charger and Press Jaws for ½” to 1” copper pipeLighter, smaller, and •more durable that its predecessor, the RP-330BAvailable in corded and •cordless models $2647.44

Milwaukee M12 Copper Press Tool KitPart #: 2473-22•Smallest and lightest press tool on the market•Balanced design is suitable for one hand•Includes ½”, ¾” 1” Jaws•

$1799.49

RIDGID Pipe Wrenches

10” 31010 • $20.8112” 31015 • $23.9814” 31020 • $26.8818” 31025 • $38.8524” 31030 • $62.87

RIDGID K-45AF Autofeed Drain Cleaner Gun

Part #: 35473•Advanced 2-way autofeed lets you clean •drains better and faster than ever beforeProfessional’s choice for cleaning small •secondary lines from ¾” to 2 ½”

$327

RIDGID Navitrack Scout 512 Hz

Part #: 19238•Multi directional antenna and •easy to read display makes locating cameras and remote transmitters fast, easy and accurateAutomatically calculates depth •when over the target $1,323

RIDGID SeeSnake RM200 Self Leveling Camera

Part #: 42348•1.5” to 6” lines up to 200’•Includes transport cart•

Starting at

$1,932

$6,155.60



Stren-Flex Heavy Duty Eye & Eye Flat Slings

2 Ply, 2” wide•All purpose, low-profile heavy duty slings•

4’ - • $13.99 6’ - • $17.628’ - • $21.2410’ - • $24.8712’ - • $28.5016’ - • $35.7520’ - • $43.00

Pipe & Lifting

Jet Ratcheting Cable PullersGeneral purpose come-alongs designed to lift, •lover, stretch, or pull heavy loadsLightweight zinc-plated steel construction•

1 Ton, Part #: 180410, • $392 Ton, Part #: 180420, • $444 Ton, Part #: 180440, • $59

$865.30

Simplex 5 Ton Mechanical Reel Jack

Part #: CR320B•Double lever sockets for jacking in •close quartersDrop forged, alloy steel, heat-•treated componentsTop fits 64 mm spindles, side •hooks fit up to 2” spindles

Genie Material Handling SuperLift

Designed for the construction •industryGreat for industrial and HVAC •applications650 lbs., 18 Ft. capacity•

$2,322

Milwaukee M12 ProPex Expansion Tool Kit

Part #: 2432-22•Pex expansion tool for ProPEX by Uponor•Includes ½”, ¾” and 1” expansion heads•

RIDGID Die Head Pipe Threader Set

Part #: 36475•Includes 12-R handle and •½”, ¾”, 1”, 1 ¼”, 1 ½” and 2” die heads, alloy dies, and carrying case

$657

RIDGID VF-99 V-Head Folding Pipe Stand

Part #: 22168•Ergonomic V-handle – •angled for a comfortable hand position during transport and height adjustmentHolds up to 12” •pipe $91.08

Wheeler-Rex 2 ½” – 6” Pipe Threading Machine

Part #: 6590•One of the only pipe threaders on the •market with 6” pipe capacityGear driven, quiet, with accurate and •quality die headsCompletely equipped to cut, thread, •and ream

$11,698

$399



Voltec Inverters400W 10-00477 • $26.32750W 10-00479 • $44.781000W 10-00480 • $76.701500W 10-00481 • $124.042000W 10-00482 • $190.343000W 10-00483 • $283.562000W Pure Sine 10-00487 • $363.12

XG6500

XG8000E

XP4000

XP6500E XP8000E

Jobsite Power & LightingGenerac XG Generators

The Generac OHVI engine incorporates full pressure •lubrication with an automotive style spin-on oil filter for longer engine lifeHour meter with maintenance resets tracks usage •and monitors maintenance cyclesFull panel GFCI protection ensures quality power to •your tools

XP4000 • $1499.02

XG6500 • $1099.87

XP6500E • $1899.21

XG8000E • $1399.79

XP8000E • $2199.45

Voltec 60 LED Worklight + 1W Flashlight

Part #: 08-00700•Rechargeable, •Includes Charger

$36.99

Voltec 1W HeadlightPart #: 08-00695•

$11.99

Voltec 12 Gauge Light End Power Cords

50’, Part #:05-00365, • $29.99100’, Part #: 05-00366, • $59.99

Voltec 100’ Metal Cage Light String

Part #: 08-00198•10 light outlet, 150 watt max •bulb output

$114.59

Chicago Pneumatic CPG 25 Pull Behind Generator with Trailer

Part #: 8972822866•22 Kw Rated Prime Power•39 hour run time at 75% with integrated 30 gallon in-frame fuel •tankReliable Kubota engine and Leroy Somer alternator•

$17,599.32



19 Piece Electrician

28 Piece Master Set

10 Piece Electrician

8 Piece General Purpose

13 Piece General Purpose

GREENLEE Speed Punch Knockout Set

Part #: 7906SBSP•Speed-Punch System saves time and •money with every punchIncludes Quick-Draw •punch, Punches and Dies for 2/4” – 2”, Speed Lock, Draw Stud, 7/8” Step Bit, and plastic storage case

Milwaukee M12 Thermal Imager

Part #: 2260-21•3.5” LCD display•Saves images to SD card •(included) with both thermal image and regular camera picture

ElectricalMilwaukee Hole Saw Kits

8 Piece General Purpose 49-22-4005 • $49.97

10 Piece Electrician 49-22-4095 • $49.98

13 Piece General Purpose 49-22-4025 • $79.97

19 Piece Electrician 49-22-4105 • $149.96

28 Piece Master Set 49-22-4185 • $199.99

$2,500

Part #: G3•One piece assembly, enters the jobsite in •one trip, no pins or adapters to misplace or come back forEasily change tail length, pull direction, •and angle of pull with ease

$2,999

GREENLEE 2000 lbs. Cable Puller

GREENLEE 125’ Steel Fish Tape

Part #: FTS438-125•Oil tempered spring •steel for excellent fishing performance

Bosch High Speed Step Drill Bits

1/4” - 1-3/8” SDH10 • $65.541/4” - 3/4” SDH3 • $26.011/4” -7/8” - 1-1/8” SDH4 • $41.241/8” - 1/2” SDH1 • $14.44 3/16” - 1/2” SDH6 • $14.74

Milwaukee 3 Piece 1000V Insulated Screwdrivers

Part #: 48-22-2202•Includes ECX, Phillips and Slotted •ScrewdriversDual layer insulation offers visual wear •indication for tool replacement

$24.99

$999.85



Chicago Pneumatic 1” Heavy Torque Imact Wrench

CP796•Industry best •power to weight – 2000ft. lbs.

Fleet MaintenanceIngersoll Rand IQV20 Cordless ½” Impact Wrench

Part #: W7150-K1•The power of an air tool in a cordless •electric - 1,100 lbs. of torque represents best in classIncludes Tool, 1 battery, charger, and •carrying case

$424

Ingersoll Rand ½” Titanium Duty Impactool

Part #: 2135TiMAX•Sets the standard for performance with •the best power to weight ratio in its class780 ft-lbs of torque in reverse from a •tool weighing just 4 lbs.

$299

Chicago Pneumatic ¾” Impact Wrench

Part #: CP7769•1440 ft-lbs of torque•Insulating and lightweight •composite handle

Ingersoll Rand 1” Heavy Duty Extended Anvil Air Impact Wrench

Part #: 285B-6•1,475 ft-lbs. maximum torque•Superior balance, angled down •exhaust

Chicago Pneumatic ½” Impact Wrench CP7748

Part #: 8941077480•920 ft-lbs. of torque•

$455$198.99

$479.99$1923.99



Hein Warner Floor JacksMade in America•Designed to last four times longer than other jacks•

2 Ton

Part #: 93642, $329.50

3 Ton

Part #: 93652, $425.00

Ingersoll Rand 4.5” Super Duty Air Angle Grinder

Part #: 3445MAX•0.88 HP and 12,000 rpm motor•

Power Team 6 Ton Puller

Part #: PH63C•The harder the puller •force, the tighter the jaws gripSelf- Contained, no •other tools required

Ingersoll Rand Socket KitsSK34C86 – 3/8” & ½” 86 Piece• $229.89SK4H13 – ½” 13 Piece • $38.50SK4H13L – ½” 13 Piece Deep • $63.00SK6H8 – ¾” 8 Piece • $76.30SK6H8L – ¾” 8 Piece Deep • $89.49SK8H8 – 1” 8 Piece • $105SK8H8L – 1” 8 Piece Deep • $135.80 $229.89

$249

Gray High Rise Automotive Transmission Jack

Part #: HTJ-1000•1,000 lbs. capacity•FREE SHIPPING•

$1639.00

Lincoln Lube 18V Cordless Powerluber Grease Gun

Part #: 1844•7,500 PSI max pressure•Includes Charger, 2 18V batteries, •and a carrying case

$249

Lincoln Lube 3/8” x 50’ Low Pressure Air Hose Reel

Part #: 83753•300 psi capacity, retractable •air hose reel

$149.89

Gear Wrench 23 Pc. SEA Standard and Deep Socket Set

Part #: 80707•Includes: (12) 6 pt. 1/2” •Drive Standard SAE Sockets (7/16” - 1-1/8”), (8) 6 Pt. 1/2” Drive Deep SAE Sockets (1/2” - 15/16”), 5” Extension - 1/2” Drive, 15” Extension - 1/2” Drive, Full polished tear-drop ratchet - 1/2” drive

Porto- Power Hydraulic SetsSnap-lock design for quick and easy assem-•blyAutomatic pump overload system protects •against damage to rams and equipment

4 Ton

$199.98

10 Ton

$299.96

$91

$542



Moly Chain Lubricant S00201 LU202

$4.99

Chemicals, Paints & AdhesivesThe Protector All Purpose Lubricant S00711 LU711

$3.99

Rust Breaker Heavy Duty Rust Penetrant S00103 LU103

$4.99

Blast’em Wasp & Hornet Killer S02085700 SP857

$5.99

Non-Clorinated Brake & Parts Cleaner S00705 SP705

$3.99

Zinc Rich Galvanizing Compound S00740 WL740

$5.99

Glass & General Purpose Cleaner S00880 CD880

$2.99

Flash Free Electrical S20848 EL848

$8.99

Citrus Degreaser – BiodegradableS00757 CD757

$5.99

Cutting Oil Lubricant S00201 LU208

$4.99



White Lightning

RTV Silicone Caulk Contractor Grade White, Black, Clear

$2.99

Carpet Covering Film Protection 24”x200’

$29.99

Floor Board 48mil Fiber Surface Protection 38”x100’

$49.99Grey Duct Tape 9mil 2”x60”

$4.49

Grey Duct Tape 11mil 2”x60”

$6.49

Stop Gap

Triple Expanding Foam

$6.99Minimal Expanding Foam

$6.99

Premium Black Eletrical Tape 7mil ¾”x66”

$1.99

Blue Painters Masking Tape 2”x60”

$4.49

Duct, painters, electrical tapes

Plasticover Carpet Film Applicator Part #: 90224•Saves time and labor money – covers stairs in •under 2 minutesAdjustable •dispenser fits 24”, 36” and 48” rolls

$179.99



Simpson Strong-Tie Crack-Pac Concrete Repair and Nozzle

Part : ETIPAC10•Repairs cracks in concrete •ranging from 1/64” to ¼” wide9 oz. cartridge•

Simpson Strong-Tie EDOT Epoxy

Part #: EDOT22•Used for threaded rod •anchoring and rebar doweling22 oz. container, two •component system enables leftover product to be re used

Simpson Strong-Tie Titen HD Screw Anchors

THD37300H - 3/8 x 3” Box of 50 • $32.00

THD37400H - 3/8 x 4” Box of 50 • $33.00

THD37500H - 3/8 x 5” Box of 50 • $47.50

THD37600H - 3/8 x 6” Box of 50 • $53.00

THD50300H - 1/2 x 3” Box of 25 • $23.50

THD50400H - 1/2 x 4” Box of 20 • $19.80

THD50500H - 1/2 x 5” Box of 20 • $27.20

THD50600H - 1/2 x 6” Box of 20 • $28.20

Simpson Strong-Tie Quick Drive PROCCS+ Combo System with Makita

Part #: PROCCS+M25K•Quickly and easily drives screws into subfloor wood or steel, •wall plates, decking on decks and docks, and fiber cement siding

Anchors & Fastening

Simpson Strong-Tie Drop-In Internally Threaded Anchors

DIA25 - 1/4” Rod - Box of 100 - • $11.83

DIA37 - 3/8” Rod - Box of 50 - • $8.05

DIA50 - 1/2” Rod - Box of 50 - • $14.60

DIA50C - 1/2” Coil-Thread Rod - Box of 50 - • $32.53

DIA72 - 5/8” Rod - Box of 25 - • $17.98

DIA75 - 3/4” Rod - Box of 20 - • $26.46

DIA75C - 3/4” Coil-Thread Rod - Box of 20 - • $41.00

$24.99

$16.89

$359.96



CST Rotary Laser Complete Package 5

• Part #: 7-ALHVPKG

Milwaukee 25’ Magnetic Tape Measure

Rolotape 11-1/4” Measuring Wheel

Measuring

Pacific Laser 3 Dot LaserPart #: PLS3•Provides point-to-point indoors •and outdoors alignment information quickly and easilyIncludes •Floor stand and magnetic wall bracket

$205

Pacific Laser 5 Dot LaserPart #: PLS5•Smaller, lighter, more durable, •and self-leveling to within six degreesIncludes Magnetic wall bracket, •pendulum layout target, floor stand

$396.50

Pacific Laser Dual Line Laser

Part #: PLS180•Fast accurate and portable •plumb, level, and square line laserIncludes carrying case and •wall bracket

$282.01

Bosch 3 Axis Self-Leveling Line Laser

Part #: GLL3-80•Provides Precise •360-degree full plane coverage in both horizontal and vertical operationsIncludes positioning •device

$499.87

Bosch Green Beam Self-Leveling Rotary Laser

Part #: GRL300HVG•Bright green beam laser for •better visibilityElectrical self-leveling in both •horizontal and vertical positionIncludes full function remote •control, wall mount, magnetic target, and a pair of laser glasses

$998

$59.99

$159.99

Empire Levels 48” Digital Level with Laser

$24.99

$1189.16



THE RIGHT RADIO FOR THE RIGHT JOBWITH THE RIGHT REBATE

Save up to $1800* Buy 6 and Save

Act Now! For complete rebate details visit: www.motorolasavings.com

ON SELECT PURCHASES OF MOTOROLA TWO-WAY RADIOS.

Offer valid September 1 - December 31, 2013

*Based on maximum purchase of 60 DTR Radios

BUY 6 DTR SERIES™ RADIOSAND RECEIVE $180

BUY 6 CLS SERIES™ RADIOSAND RECEIVE $120

BUY 6 RDX SERIES™ RADIOSAND RECEIVE $150

BUY 6 CLP SERIES™ RADIOS AND RECEIVE $120

MOTOROLA, MOTO, MOTOROLA SOLUTIONS, and the stylized M logo are trademarks or registered trademarks of Motorola Trademarks LLC and are used under license. All other Trademarks are the property of their respective owners. © 2013 Motorola Inc. All rights reserved.

ProCell Batteries ListAA - Box 24 • $12.99

AAA - Box of 24 • $13.99

C - Box of 12 • $11.99

D – Box of 12 • $12.99

9V - Box of 12 • $19.99

General Construction

Razor-Back Round Point Super Socket Shovel w/ Wood Handle

Part #: 4553079•

$19.99

True Temper Wrecker Bar18” 1169800 • $6.99

36” 1171600 • $9.99

Wilton Unbreakable B.A.S.H. Sledgehammers

Rated to 10,000 overstrikes – handles •backed up by $1000 guarantee

21436 36” 14lbs • $129.99

21036 36” 10lbs • $104.99

20830 30” 8lbs • $84.99

20630 30” 6lbs • $74.99

20416 16” 4lbs • $52.99

WypAll X90 Cloth Box 136

12891

WypAll X60 Wipers Box 180

34015

Lifter Wipes in a Bucket - 70ct $12.99

$24.49

$17.99



Power Team Single Acting Electric Hydraulic Pump

Part #: PE172•Two-speed, 2-way valve, •generally recommended for cylinders up to 55 tonsEquipped with 3,450 RPM, •Single-phase, thermal protected induction motor, 10ft. remote control cordLow amperage •draw, small generators and low amperage circuits can be used as a power source

Hydraulic Pumps & Cylinders

Power Team SideWinder 5 Ton ¾” Stroke Bottle Jack

Part #: 9105A•Incredibly versatile bottle jack that can •operate either horizontally or vertically3-1/3” retracted height – Handle functions •in line with the base for easier use in confined spaces

Norco 20 Ton Air Actuated Hydraulic Bottle Jack

Part #: 76320A•Effortless air operation •greatly reduces operator fatigue and efficiency of garage workFingertip remote control •for added safety without sacrificing the manual operation

$1,808.34

Power Team Aluminum Hydraulic Hand PumpPart #: P59L•Two-speed – 69 cu. In oil capacity•Durable aluminum reservoir, manifold, •and end cap $373.15

Power Team Single Acting Spring Return Cylinder

C106C - 10 Ton, 6” Stroke - • $357.85C1014C - 10 Ton, 14” Stroke - • $564.40C254C - 25 Ton, 4” Stroke - • $513.40C2510C - 25 Ton, 10” Stroke - • $901.00C552C - 55 Ton, 2” Stroke - • $878.05C556C - 55 Ton, 6” Stroke - • $1001.30C1002C - 100 Ton, 2” Stroke - • $1943.95C1006C - 100 Ton, 6” Stroke - • $1983.90

Simplex Aluminum Hydraulic Set – 30Ton 6”Stroke Cylinder and Hand Pump

Part #: STL306•Optimum performance is provided with •matched hand pump and cylinderTwo stage hand pump allows for quick •and easy set up

$1,577.60

Norco 20 Ton Standard Bottle Jack with Gauge Hole

Part #: 76520AG•Used in heavy duty trucks, farm •equipment, building construction, construction and mining equipment, mobile home set-up, and oil-field applicationsLonger wear life due to internally •machined oil passages, smooth bearing surfaces and close tolerances

$189.97

$265.95

$147.05

Bosch Click & Go System The new Bosch Click & Go system, featuring the LBOXX, is designed to increase organization and aid in transportation to and from your workspace. Bosch LBOXXes feature one click stacking, making it easy for multiple boxes to be carried at the same time. The LBOXX solution can help you turn a messy garage, truck, or shop into a professionally organized workspace. Get back the time you spend looking for and hauling things and put it into your job with the Bosch Click & Go.

Bosch L-Boxx

L-Boxx-1A $54.00•L-Boxx-3D $59.00•

I-Boxx72-10 $49.00•I-Boxx53-12 $29.00•LST92-OD $10.00•

L-CART $99.98•

www.ohiopowertool.com

999 Goodale Blvd.Columbus, OH 43212

Ames Razorback Square Point Shovel

Part #: 44124•9-1/2” x 12” •industrial gauge steel blade48” hardwood •handle

Multiquip Dewatering Pump for Clean Water

Part #: ST2037•115V, 1 HP motor•Moves up to 73 •gallons per minute

Tanaka Gas Powered Drill with Reversing Lever

Part #: TED-270PFR•27 cc, 1.4 HP, 2-stroke engine, •PureFire engine

$329.99

$521.99

$54.00

$99.98

$19.99

Expires November 30, 2013, Quantities May be Limited, Prices Subject to Change at Anytime

19 8 3 – 20 3 - Coptool 8 3 – 20 3 Krylon Quik-Mark ... range of professional industries as well...

Documents

Transcript of 19 8 3 – 20 3 - Coptool 8 3 – 20 3 Krylon Quik-Mark ... range of professional industries as well...